Description:

Note: (Springs Sold Separately Use Springs Series 08790-)

Description: Rotobox BOOST Front Wheel

The new and improved model BOOST carbon fiber wheel from Rotobox, decreasing the weight from the RBX2 with improved design and higher performance! Comes in gloss and matte finish, in both symmetric and convex designs.

Like the RBX2, the BOOST is produced using Rotobox's unique 3-component composite - combining carbon, epoxy and stainless steel. By integrating the stainless 2,5 mm steel wire in each side of the rim, we increase its impact resistance at the most critical outer part. JWL and DOT approved, having met JASO T203-85 safety standards.

Another hidden BOOST gem - the Structural Rib. Thanks to the High Pressure Core Technology the structural rib is placed in the inner side between the spokes, with its mission to support the stress hot spot of the wheel. As a result the BOOST elegant spoke design brings greater stiffness and although the spokes are thinner the BOOST is stronger than ever - with a permissible static load of 280 kg on the rear and 180kg on the front wheel.

ASSEMBLING COMPONENTS
Carbon fiber composite rim, a one-piece hollow carbon cast, reinforced with stainless steel wire and UV protected; 7075 T6 aluminum alloy hubs, spacers and sprocket carrier [only with rear symmetric wheel]. machined from solid and hard anodized; polyurethane cushion drive set; SKF bearings; aluminum valve stem.

PRODUCT QUALITY CONTROL
Your Rotobox wheel has its own Serial Number to track the production history. We confirm to have performed quality verification procedure of your Rotobox wheel.

SIZE
17" x 3.5"

WEIGHT
REAR WHEEL WEIGHT 2.58 kg / 5.68 LBS

MAX. STATIC LOAD
REAR 180 kg / 400 LBS

MAX. OPERATING TEMPERATURE
100 C / 212 F

MAX. PRESSURE
4 BAR / 58 PSI

The wheels conform to safety standard JASO T203-85 for JWL dotE Certification. Before riding on public streets, be sure to check your local regulations.
Rotobox Boost Wheel set Weight example:
Stock S1000RR 11.70kg (25.79 lbs)
Rotobox Boost 6.69kg (14.74 lbs)
Weight saving more than 5.00kg of rotating mass. Incredible!

Description: Rotobox BOOST Symmetric Rear Wheel

The new and improved model BOOST carbon fiber wheel from Rotobox, decreasing the weight from the RBX2 with improved design and higher performance! Comes in gloss and matte finish, in both symmetric and convex designs.

Like the RBX2, the BOOST is produced using Rotobox's unique 3-component composite - combining carbon, epoxy and stainless steel. By integrating the stainless 2,5 mm steel wire in each side of the rim, we increase its impact resistance at the most critical outer part. JWL and DOT approved, having met JASO T203-85 safety standards.

Another hidden BOOST gem - the Structural Rib. Thanks to the High Pressure Core Technology the structural rib is placed in the inner side between the spokes, with its mission to support the stress hot spot of the wheel. As a result the BOOST elegant spoke design brings greater stiffness and although the spokes are thinner the BOOST is stronger than ever - with a permissible static load of 280 kg on the rear and 180kg on the front wheel.

ASSEMBLING COMPONENTS
Carbon fiber composite rim, a one-piece hollow carbon cast, reinforced with stainless steel wire and UV protected; 7075 T6 aluminum alloy hubs, spacers and sprocket carrier [only with rear symmetric wheel]. machined from solid and hard anodized; polyurethane cushion drive set; SKF bearings; aluminum valve stem.

PRODUCT QUALITY CONTROL
Your Rotobox wheel has its own Serial Number to track the production history. We confirm to have performed quality verification procedure of your Rotobox wheel.

SIZE
17" x 6.00"

WEIGHT
REAR WHEEL WEIGHT 4.11 kg / 9.06 LBS

MAX. STATIC LOAD
REAR 280 kg / 617 LBS

MAX. OPERATING TEMPERATURE
100 C / 212 F

MAX. PRESSURE
4 BAR / 58 PSI

The wheels conform to safety standard JASO T203-85 for JWL dotE Certification. Before riding on public streets, be sure to check your local regulations.
Rotobox Boost Wheel set Weight example:
Stock S1000RR 11.70kg (25.79 lbs)
Rotobox Boost 6.69kg (14.74 lbs)
Weight saving more than 5.00kg of rotating mass. Incredible!

Description: Rotobox BOOST Symmetric Rear Wheel

The new and improved model BOOST carbon fiber wheel from Rotobox, decreasing the weight from the RBX2 with improved design and higher performance! Comes in gloss and matte finish, in both symmetric and convex designs.

Like the RBX2, the BOOST is produced using Rotobox's unique 3-component composite - combining carbon, epoxy and stainless steel. By integrating the stainless 2,5 mm steel wire in each side of the rim, we increase its impact resistance at the most critical outer part. JWL and DOT approved, having met JASO T203-85 safety standards.

Another hidden BOOST gem - the Structural Rib. Thanks to the High Pressure Core Technology the structural rib is placed in the inner side between the spokes, with its mission to support the stress hot spot of the wheel. As a result the BOOST elegant spoke design brings greater stiffness and although the spokes are thinner the BOOST is stronger than ever - with a permissible static load of 280 kg on the rear and 180kg on the front wheel.

ASSEMBLING COMPONENTS
Carbon fiber composite rim, a one-piece hollow carbon cast, reinforced with stainless steel wire and UV protected; 7075 T6 aluminum alloy hubs, spacers and sprocket carrier [only with rear symmetric wheel]. machined from solid and hard anodized; polyurethane cushion drive set; SKF bearings; aluminum valve stem.

PRODUCT QUALITY CONTROL
Your Rotobox wheel has its own Serial Number to track the production history. We confirm to have performed quality verification procedure of your Rotobox wheel.

SIZE
17" x 6.00"

WEIGHT
REAR WHEEL WEIGHT 4.11 kg / 9.06 LBS

MAX. STATIC LOAD
REAR 280 kg / 617 LBS

MAX. OPERATING TEMPERATURE
100 C / 212 F

MAX. PRESSURE
4 BAR / 58 PSI

The wheels conform to safety standard JASO T203-85 for JWL dotE Certification. Before riding on public streets, be sure to check your local regulations.
Rotobox Boost Wheel set Weight example:
Stock S1000RR 11.70kg (25.79 lbs)
Rotobox Boost 6.69kg (14.74 lbs)
Weight saving more than 5.00kg of rotating mass. Incredible!

Description: Rotobox RBX2 Front Wheel

ASSEMBLING COMPONENTS
Carbon fiber composite rim, a one-piece hollow carbon cast, reinforced with stainless steel wire and UV protected; 7075 T6 aluminium alloy hubs, spacers and sprocket carrier [only with rear symmetric wheel]. machined from solid and hard anodized; polyurethane cushion drive set; SKF bearings; aluminium valve stem.

PRODUCT QUALITY CONTROL
Your Rotobox wheel has its own Serial Number to track the production history. We confirm to have performed quality verification procedure of your Rotobox wheel.

SIZE
17" x 3.5"

WEIGHT
REAR WHEEL WEIGHT 2.58 kg / 5.68 LBS

MAX. STATIC LOAD
REAR 150 kg / 330 LBS

MAX. OPERATING TEMPERATURE
100 C / 212 F

MAX. PRESSURE
4 BAR / 58 PSI

The wheels conform to safety standard JASO T203-85 for JWL dotE Certification. Before riding on public streets, be sure to check your local regulations.
The complete set of RBX2 wheels, without brake rotors and sprocket, weighs:
6,65 kg (14.6 lbs) for Kawasaki ZX10R
6,61 kg (14.5 lbs) for Aprilia RSV4
6,90 kg (15.1 lbs) for BMW S1000RR
5,35 kg (11.6 lbs) for Ducati 1199 Panigale

Description: Rotobox RBX2 Symmetric Rear Wheel

ASSEMBLING COMPONENTS
Carbon fiber composite rim, a one-piece hollow carbon cast, reinforced with stainless steel wire and UV protected; 7075 T6 aluminium alloy hubs, spacers and sprocket carrier [only with rear symmetric wheel]. machined from solid and hard anodized; polyurethane cushion drive set; SKF bearings; aluminium valve stem.

PRODUCT QUALITY CONTROL
Your Rotobox wheel has its own Serial Number to track the production history. We confirm to have performed quality verification procedure of your Rotobox wheel.

SIZE
17" x 6.0"

WEIGHT
REAR WHEEL WEIGHT 4.11 kg / 9.06 LBS

MAX. STATIC LOAD
REAR 250 kg / 550 LBS

MAX. OPERATING TEMPERATURE
100 C / 212 F

MAX. PRESSURE
4 BAR / 58 PSI

The wheels conform to safety standard JASO T203-85 for JWL dotE Certification. Before riding on public streets, be sure to check your local regulations.
The complete set of RBX2 wheels, without brake rotors and sprocket, weighs:
6,65 kg (14.6 lbs) for Kawasaki ZX10R
6,61 kg (14.5 lbs) for Aprilia RSV4
6,90 kg (15.1 lbs) for BMW S1000RR
5,35 kg (11.6 lbs) for Ducati 1199 Panigale

Description: Vesrah Brake Pads VD-170XX

*Sold per caliper

Honda CBR600RR (2005 - 2019) - w/ Tokiko Calipers
Honda CBR600RRA (2009 - 2019) - ABS w/ Tokiko Calipers
Honda CBR1000RR (2004 - 2016) - w/ Tokiko Calipers
Honda CBR1000RRA (2008 - 2016) - ABS w/ Tokiko Calipers

Vesrah XX pads are the top of the line pad. MADE FOR RACING. They offer slightly less bite than the older RJL compound but greater braking power with a progressive feel. Small increases in lever force translate to exceptional increases in braking power. True one-finger braking with excellent feel and no fade. Your brakes will have the same feel and response from the first corner to the last.

Description: AiM Sports Data Acquisition Components
EVO4 BMW S1000RR ECU harness

Description: The NEW Antigravity ATZ-7-RS is a hi-power lightweight Lithium-Ion battery, built with our groundbreaking RESTART Technology (built-in jump-starting) so you won’t ever get stranded with a dead battery again! Directly replaces the OEM YTZ7S, YTZ5 and others. 90% of off-road bikes use this size as well as some street bikes.

Description: Armour Bodies Honda CBR600 2007-2008 Pro Series SuperBike Kit W/Tank Cover 71-0338SB

Description: ATTACK PERFORMANCE REAR SET KIT, HON CBR600RR 07- , BLACK (REPLACEMENT PARTS) 216110BE
MADE IN USA At Attack Performance they have set up many championship winning chassis along with designing, manufacturing, and building our own MotoGP machine with their own parts. Attack Performance utilizes chassis simulation software to find critical dimensions such as Rake, Trail, Wheel Forces, and Linkage Ratios, just to name a few. Those tools combined with their decades of racing eliminates the guesswork from chassis setup.

Description: ATTACK PERFORMANCE REAR SET KIT, TRIUMPH 675 06- , AERO HARD 709110G
MADE IN USA At Attack Performance they have set up many championship winning chassis along with designing, manufacturing, and building our own MotoGP machine with their own parts. Attack Performance utilizes chassis simulation software to find critical dimensions such as Rake, Trail, Wheel Forces, and Linkage Ratios, just to name a few. Those tools combined with their decades of racing eliminates the guesswork from chassis setup.

Description: ATTACK PERFORMANCE REAR SET KIT, HON CBR600RR 07- , AERO HARD (REPLACEMENT PARTS) 216110GE
MADE IN USA At Attack Performance they have set up many championship winning chassis along with designing, manufacturing, and building our own MotoGP machine with their own parts. Attack Performance utilizes chassis simulation software to find critical dimensions such as Rake, Trail, Wheel Forces, and Linkage Ratios, just to name a few. Those tools combined with their decades of racing eliminates the guesswork from chassis setup.

Description: Bonamici Racing Aluminium Brake Lever Honda CBR 600 RR (2007/>), CBR 1000 (2008/>) LB150

Description: Bonamici Racing Aluminium Clutch Honda CBR 600 RR (2007/>), CBR 1000 (2008/>) LC020

Description: Bonamici Racing Aluminium Rearsets Honda CBR 600 RR (race) 2007 - 2017 H006

These racing rearsets are manufactured in Italy and are superb quality, and will fit the CBR600RR (2007 - 2017). They are CNC machined from billet aluminium billet and powder coated black. Other colours are available (gold, silver, red and blue) but it takes around 1 month for them to be manufactured and coated, so please contact us and we can arrange to get some made for you. Please note that these are for racing use and therefore do not operate the brake light. It is not possible to mount the Bonamici Racing hydrostop. Bonamici Racing rearsets use bearings to completely eliminate the friction on the levers, and a spring for the assisted return of the rear brake lever. You can adjust the footpeg in many different positions.

Description: Bonamici Racing Aluminium Rearsets Honda CBR 600 RR (street) 2007 - 2017 H005

Bonamici Rearsets are made from a single piece of billet aluminium in their factory based in Italy, with a black anodised finish for corrosion resistance and durability. These Rearsets are incredibly high quality. To ensure compatibility, Bonamici laser scan each and every bike they manufacture parts for in order to ensure fitment, after this their parts are fine tuned, tested and validated through various levels of Motorsport meaning you can have complete confidence in these Rearsets to transform your Honda CBR! These Rearsets allow you to decide where you would like the footpegs to be mounted, featuring multiple different mounting positions you can rest assured that these Rearsets will improve the handling, comfort and appearance of your CBR600RR!

Description: Aluminium TOP TRIPLE CLAMP Honda CBR 1000 RR “Street” 2017/2019 PSH1

Description: Bonamici Racing Aluminum Lever Kit CBR 1000 RR-R Fireblade SP KL310

Description: Bonamici Racing Fuel Tank Cap HONDA CBR 1000 RR FC150

This Fuel Cap has been designed by Bonamici to directly replace the OEM Fuel Cap component on the Honda CBR 1000RR, allowing you to have faster fueling times, drastically helping in something like a pit lane environment. This Fuel Tank Cap kit is perfect for either a Trackday Warrior or even your Fair Weather Rider! Manufactured from Billet Aluminium and treated to an anodized surface finish, you can rest assured that this Fuel Tank Cap Kit will withstand the harshest of conditions while looking amazing at the same time!

Description: Bonamici Racing Fuel Tank Cap Honda CBR 600 RR FC160

This Fuel Cap has been designed by Bonamici to directly replace the OEM Fuel Cap component on the Honda CBR 600RR, allowing you to have faster fueling times, drastically helping in something like a pit lane environment. This Fuel Tank Cap kit is perfect for either a Trackday Warrior or even your Fair Weather Rider! Manufactured from Billet Aluminium and treated to an anodized surface finish, you can rest assured that this Fuel Tank Cap Kit will withstand the harshest of conditions while looking amazing at the same time!

Description: 320mm x 6.75mm brake disc
Single disc
Find Brembo Racing Disc, 320x6.75mm, Pistabassa, Single Rotor, Honda CBR600, CB1000, Black Carrier
and other parts you need at hhrperformance.com - HHR Performance, Sandpoint, Idaho

Description:

Stainless Steel, Floating, Gold Carrier, Honda

Supersport discs, developed to provide the highest possible performance on the road and on the track, are available with a rotor measuring 34 mm in width and oversized to 5.5 mm in thickness, fully interchangeable with the original components without any modifications. These are fully floating discs consisting of a rotor in thermally treated steel (capable of resisting extreme thermo-mechanical stress) and a housing machined from billet aluminium alloy.
In combination with Brembo Z04 brake pads these discs have won numerous SuperSport Championships, including the 2012, 2011 and 2009 editions. The complete range of Brembo SuperSport discs can also boast the approval of the renowned TUV Certification Body which means they can be used on public roads in all countries that recognise this certification.
The Supersport discs are available both with the same diameter as the original discs, to which they are totally interchangeable, as well as with greater diameter, for which the appropriate spacers must be purchased separately. For more information please contact your local dealer.

Description:

19 RCS Corsa Corta, Long Lever, Radial, Front

The Brembo radial master cylinder with 6 different brake modulation options. The 19RCS CORSA CORTA is characterized by the possibility it provides the rider to adapt the braking "bite point" to the desired riding feeling, in addition to the RCS (Ratio Click System), introduced 10 years ago on the Brembo 19RCS radial brake master cylinder, which allows the center distance of the master cylinder to be adjusted to "18" or "20".
The meticulous study to improve the master cylinder has allowed Brembo to propose three brake master cylinders in one and to further improve braking system performance. Furthermore, taking advantage of the mixture stemming from the 18 to 20 center distance and the three maps - R,S,N - no less than 6 different combinations can be attained.
The play selector lets the rider choose between the three different available feeling maps. With the Normal map, the bite point position is such to guarantee a more gradual initial phase and is therefore suitable for city riding or braking in poor grip conditions. With the Sport map, the bite point position is such to shorten the initial phase compared to the N setting. This second map allows for a more dynamic response and a sportier riding style.
Lastly, with the Race map, the eccentric device allows the initial phase to be shortened even more, taking it to a minimum value at the same level as the master cylinders used in MotoGP: this way, the rider is able to reach the braking bite point at lighting fast speeds. This third map is ideal for a racing riding style that shaves off precious hundredths of a second in braking.
The RCS system (Ratio Click System), on the other hand, shifts the distance between the fulcrum point and the point of application on the master cylinder push rod by 2 millimeters: this results in a different distribution of the braking force without it being modified in terms of pure power.
The master cylinder body is made of forge aluminum alloy, machined with 5-axis CAM technology. A hard oxide coating is used for the surface finish, which guarantees that the master cylinder main body is highly resistant to wear and its components move easily. The floating piston and the seals derive directly from those used in MotoGP, as do the housings for the bleeding and fueling systems, which are inclined by more than 30° to make bleeding the master cylinder easier. A study was conducted for the design of the 19RCS CORSA CORTA in order to find consistency of style between all the components of the master cylinder, which now has a distinct, dynamic and sporty look in line with the style of the bikes for which it was conceived (model or design filed simultaneously with the filing of the patent on the technological solution). The lever assembly can be replaced without disassembling the RCS system (Ratio Click System) from the master cylinder and this allows the calibrations made in the installation phase to be maintained unaltered.

Description: cbr1000rr front fender for racing

Description: Stand alone strain gauge quickshifter system for 2-4 cylinder bikes

Description: D.I.D ER Series Exclusive 520 ERV7 Racing Chain 120 Link
520ERV7120ZB

-Premium Road Racing Chain
-Features gold color plates
-Tensile strength: 8,800 lbs.

Description: DYMAG UP7X FORGED ALUMINUM FRONT HONDA CBR-600RR

Front Dymag Aluminum UP7X Front Wheel comes in one size
17 x 3.5"

-Made in UK
-Average of 30% wheel weight savings vs OEM. Seen up to 40% for some models!
-All Dymag wheels come fitted standard bearings ready to use. 90 deg valve included.
-Standard colours: Black Satin Matt ; Black Gloss ; Gunmetal Grey Gloss; White Gloss; Gold Gloss.
-Non standard colours available per special request, send us email after ordering confirming your RAL Color choice.

Description: DYMAG UP7X FORGED ALUMINUM REAR HONDA CBR-1000RR

Front Dymag Aluminum UP7X Rear Wheel comes in TWO sizes
17 x 5.50"
17 x 6.00"


-Made in UK
-Average of 30% wheel weight savings vs OEM. Seen up to 40% for some models!
-Free Rear Aluminum Sprocket Included in 520, 525, 530 pitch
-Sample Total weight 12.3 lbs (ie. Dymag UP7X ZX10R Rear Wheel)
-All Dymag wheels come fitted with Black sprocket carrier, Talon gold or Black anodised sprocket and standard bearings ready to use. 90 deg valve included.
-Standard colours: Black Satin Matt ; Black Gloss ; Gunmetal Grey Gloss; White Gloss; Gold Gloss.
-Non standard colours available per special request, just send us an email!

Description: Extreme Components Rear mudguard for Honda CBR600RR (2007/2020) - CH12020

-Made In Italy
-Research and development takes place exclusively through collaboration with the best race teams engaged for years in the most prestigious national and world competitions; And only after specific tests, does Extreme Components start the production.

Description: Extreme Components Swingarm protection for Honda CBR600RR (2007/2020) - CH12055

-Made In Italy
-Research and development takes place exclusively through collaboration with the best race teams engaged for years in the most prestigious national and world competitions; And only after specific tests, does Extreme Components start the production.

Description: The Chrome Pro 2 comes in a package containing:
Chrome Pro 2
Antenna with 90 degree SMA joint for TPMS receiver
GPS receiver
Main wiring
2 TPMS receivers with adapters (optionally for 8.5mm or 11.5mm valves)
Lambda sensor BOSH LSU 4.9
Cleaning cloth
To install it you only need to choose the plug & play adapter for your motorcycle.
The Chrome Pro 2 represents the maximum evolution of the Chrome system. Designed for those who want the most from their electronics, joins the features of the Chrome Plus with a new can bus system with acquisition of over 150 channels, integrated WiFi and Bluetooth connections, complete configurability and much more. Developed from the experience gained from the collaboration with Yamaha in the WSBK, it is now available for everyone.

Description: MIVV Slip-on Suono Stainless Steel Underseat Exhaust For HONDA CBR 600 RR 2007 - 2016 UH.037.L7

Description: MWR Performance Filter For Honda CBR1000RR (2004-07) MC-030-04

Not a copy of the standard air filter, always searching for solutions, either it’s the performance , protection or fitment . Caution: clean and re-oil at least once a year with MWR air filter oil & cleaner . Remapping the ECU or the Fuel Control Module is recommended

Description: MWR Performance, HE, & Race Filters For Honda CBR600RR (2007+) MC-030-07 MC-030-07-HE MC-030-07-R

Not a copy of the standard air filter, always searching for solutions, either it’s the performance , protection or fitment . Caution: clean and re-oil at least once a year with MWR air filter oil & cleaner . Remapping the ECU or the Fuel Control Module is recommended

Description: *NEW Rotobox Bullet Forged Carbon Fiber Front Wheel Size 17"X 3.5"

Rotobox has extended its carbon motorcycle wheel product line by unveiling the Rotobox Bullet, the new thin spoke, ultra-light forged carbon wheel at EICMA. Rotobox is one of the leading companies in the development of lightweight high-performance carbon automotive wheels. It is also a company not satisfied with just keeping up with trends but setting them.

The wheels conform to safety standard JASO T203-85 for JWL dotE Certification. Before riding on public streets, be sure to check your local regulations.

Description: *NEW Rotobox Bullet Forged Carbon Fiber Front Wheel Size 17"X 3.5"

Rotobox has extended its carbon motorcycle wheel product line by unveiling the Rotobox Bullet, the new thin spoke, ultra-light forged carbon wheel at EICMA. Rotobox is one of the leading companies in the development of lightweight high-performance carbon automotive wheels. It is also a company not satisfied with just keeping up with trends but setting them.

The wheels conform to safety standard JASO T203-85 for JWL dotE Certification. Before riding on public streets, be sure to check your local regulations.

Description: *NEW Rotobox Bullet Forged Carbon Fiber Rear Wheel Size 17"X 6"
REAR WHEEL Weight
4.06 kg (8.95 lbs)

Includes Sprocket Carrier and Cush Drive Rubbers

Rotobox has extended its carbon motorcycle wheel product line by unveiling the Rotobox Bullet, the new thin spoke, ultra-light forged carbon wheel at EICMA. Rotobox is one of the leading companies in the development of lightweight high-performance carbon automotive wheels. It is also a company not satisfied with just keeping up with trends but setting them.

The wheels conform to safety standard JASO T203-85 for JWL dotE Certification. Before riding on public streets, be sure to check your local regulations.

UV PROTECTIVE COATING:
The carbon cast is protected from radiation with a very thin layer of special clear UV protective coating. Together with the clear and smooth rim surface it ensures the wheel a zero notch effect.

HIGH QUALITY CENTER PARTS:
For each motorcycle model the hubs are CNC machined from high quality 7075 T6 aluminum alloy used in the aviation industry, anodized into optional color and permanently assembled to the carbon rim.

SOLID THIN SPOKES:
To create solid thin spokes we use special carbon fiber yarn developed for military use.

THREE-COMPONENT-COMPOSITE:
Produced using Rotobox's unique 3 component composite - combining carbon, epoxy and stainless steel. The stainless 2,5 mm steel wire is integrated in each side of the rim increasing its impact resistance at the most critical outer part.

Titanium Hex Head Bolts M10x1.5x25mm:
Made from Aircraft Spec Grade 5 Titanium Alloy. Special high performance design by Rotobox. Precision machined with rolled threads and completely corrosion free. Excellent durability and minimum weight, 45% lighter than steel equivalents. Available optionally with the wheels.

CHOPPED CARBON FIBERS MEETS WOVEN FABRIC:
Rotobox's unique technology enables combining chopped carbon fibers with woven fabric seamlessly in one-piece monocoque.

PENTAGON SHAPED HUB:
The hub is locked into the carbon part with pentagon shape for ultimate transmission of torque.

Description: Samco Sport 7 Piece Silicone Radiator Coolant Hose Kit Honda CBR 600 RR (HRC Radiator Conversion) 2007 - 2020 HON-44

SamcoSport is the original performance silicone hose brand which replaces your OEM factory rubber radiator hoses to a high quality silicone hose kit.
Handmade in the UK and comes with a Lifetime Warranty ensuring you have the highest quality cooling products fitted to your motorcycle.
OEM and RACE kits available for some models.
Hose kits are usually stocked in blue and red.

Important Installation Note: We highly recommend purchasing the matching Samco Sport Hose Clamp Kit for your bike! Samco Hose Kits require the use of hose clamps without open adjustment windows as they will damage the Samco Hoses and void warranty.