HHR Performance - Engine Electronics
Select a Sub-Category
Engine Electronics Featured Products
168mm Shift rod for direct fitment on Graves 2006-2017 R6 street rearsets when needing a rod for single sensor quick shifting. Specs: 168mm female right hand 6x1 female left hand 6x1
Can also be used for multiple fitments where a 168mm application is needed.
Graves Motorsports Kawasaki ZX-6R Seat Post kit. Direct from Graves Racing Services engineered kit parts. When used for race bodywork this kit facilitates the mount of Seat, Battery and ECU!
Fitment : Kawasaki ZX-6R 2019
Fitment: Kawasaki ZX-6R 2013-2019
Description: Graves Motorsports Universal EXUP Eliminator is a simple plug-and-play application that allows the removal of the EXUP valve and motor without setting the "Check Engine light" being activated when using a full racing exhaust. Furthers the weight savings after EXUP removal and allows for a cleaner appearance. It will eliminate error codes 17 & 18 ONLY.
- FITMENT: Yamaha R6 2006-2016, R1 2002-2003 + 2007-2008, R1 / R1M / R1S 2015-2017, FZ1 2006-2016, WR250 2008-2017 and VMax 2009-2016
NOTE: See seperate listing for 2004-2006 R1 and 2017-2019 R6.
Fitment: 2004-2006 Yamaha R1 / 2017-2019 Yamaha R6
- If you are using your motorcycle on a closed course (racing, track days, etc.) you will want to remove all unnecessary equipment from your bike for reduced weight and ease of maintenance.
- To get an accurate Air:Fuel (A/F) ratio when dynoing the bike. The air injection system pumps fresh air directly into the exhaust stream in order to burn off any unused fuel. Unfortunately by doing this the A/F ratio is thrown off by the extra "fresh air" in the exhaust stream. By removing the air injection system you can achieve an accurate A/F ratio.
- Sold set of four
Front marker lights sit in the OEM signal pockets offering a clean, factory look. Rear marker lights can be used with either the stock fender (signal wiring length may require extending on some models for the rear setup) or Graves Motorsports Fender Eliminator Kit. Comes with 2 signals per purchase (enough to do either the front or the back of the bike). Keep in mind LED's have little resistance on your motorcycle and in most cases a flasher relay will be required to even out the flashing rates of your motorcycle.
FITMENT: Yamaha R1 2004-2014 + R6 2003-2017 (2017-2018 rear only with Graves Fender) + R6S 2006-2009 + FZ1 2006-2015 + FZ8 (all) + FZ09 (all) + MT-07 (all) + MT-09 (all) + MT-10 (all)
Use this kit alongside your FTEcu flashed ECU to activate clutchless up shifting without letting off the throttle AND SMOOTH FAST clutch-less DOWNSHIFTING! After years of development we are proud to release the best auto-blipper available. This system provides positive feeling clutch-less downshifting that rivals even the OEM’s like BMW and Ducati. Note: This kit requires a active FTEcu license for the FZ10 you are mounting it on. The included activation code must be added to your' setup and the flash updated back to the bike.