HHR Performance - Exhaust Systems
Motorcycle Exhaust Systems
Exhaust production is a natural part of riding a motorcycle; as such, it’s vital that any bike has the components to handle it. Not only do these parts help direct the flow of these fumes away from the rider, but they also ensure proper release from the engine. This way, your bike is both safer and higher performing during a race. HHR Performance specializes in carrying high-performance motorcycle exhaust systems and slip-ons, half systems, full systems, exhaust brackets, accessories, and more. With these upgrades, you’ll never need to worry about the performance of your engine when you should be focusing on the competition. Browse our carefully selected collection of aftermarket motorcycle exhaust systems today at HHR Performance to find the perfect system for your needs and budget. Best of all, professional teams use our products, making it clear that you’re getting a quality part every time.
Select a Sub-Category
Exhaust Systems Featured Products
This breakthrough system replaces your inadequate stock O2 sensor with a proprietary FTECU lambda controller and the latest generation Bosch LSU 4.9 sensor.
This kit requires:
- Data-Link ECU Flashing Kit ( bike harness required for tuning / data acquisition )
- Exhaust with a standard 18×1.5 O2 sensor bung (optionally cylinder specific bungs)
- Smog block-offs or disabled AIS valve (Graves Smog Block Off plates listed separately)
This kit includes:
- 1 FTECU YAM-01 Lambda Controller
- 1 Bosch LSU4.9 wideband O2 sensor
- 1 Product Activation Card
Model Fitment:
- Kawasaki ZX10 2016-2019 Note: You will need an 18x1.5mm Lamda Collar in your ZX10 exhaust for this installation this does not come on the stock exhausts but standard on Graves Cat Eliminator and Full Exhaust Systems.
- Kawasaki H2 2015+ Note: You will need an 18x1.5mm Lamda Collar in your exhaust for this installation
- Kawasaki ZX-6R 2019 Note: You will need an 18x1.5mm Lamda Collar in your exhaust for this installation
Fitment:
- Kawasaki ZX-6R 2019 + Z900 2017-2019
This Interface allows you to easily adjust the following!
- Remove ECU Restrictions
- High Load Fuel Maps (with PC3 and PC5 map importing)
- Low Load (cruising) Fuel Maps and Bias Mapping
- Cylinder Specific Ignition Timing by Gear
- Throttle by Wire Adjustments
- Engine Braking Adjustments
- Cooling Fan Temp Adjustment
- Disable Injector Decel cut-off
- and new features are added regularly.
- See screen shot for list of current features
Data-Link ECU Flashing Bike Side Kit Includes:
- FTdataLink ECU Interface USB Cable
- Bike-side programming harness to permanently install on your bike
- FT ECU License to allow unlimited flashes for a single ecu
We believe everyone deserves the same tuning technology that until now was reserved for factory riders. With the FTEcu software you can remove the restrictions that the factory must put in place to meet strict street vehicle guidelines. By flashing your ECU you are able to tune your bike without interfering with critical correction factors resulting in smoother power gains than ever before possible.This product is for RACE USE ONLY! The included software will automatically update as new features are added!
Fitment:
- Kawasaki ZX10 2016-2019
This Interface allows you to easily adjust the following!
- Remove Throttle-By-Wire Restrictions
- Engine Braking adjustments
- High Load Fuel Maps (with PC3 and PC5 map importing)
- Low Load (cruising) Fuel Maps
- Ignition Timing
- Immobilizer Function
- Cooling Fan Temps
- Rev-Limiter Control
- and new features are added regularly.
Bench ECU Flashing Kit Includes:
- FTdataLink ECU Interface USB Cable
- Bench Flashing Harness to flash your ECU outside of the bike
- Power Supply for Bench flashing
- FT ECU License to allow unlimited flashes for a single ecu
We believe everyone deserves the same tuning technology that until now was reserved for factory riders. With the FTEcu software you can remove the restrictions that the factory must put in place to meet strict street vehicle guidelines. By flashing your ECU you are able to tune your bike without interfering with critical correction factors resulting in smoother power gains than ever before possible.This product is for RACE USE ONLY! The included software will automatically update as new features are added!
Fitment:
- Kawasaki ZX10 2016-2019
This Interface allows you to easily adjust the following!
- Remove Throttle-By-Wire Restrictions
- Engine Braking adjustments
- High Load Fuel Maps (with PC3 and PC5 map importing)
- Low Load (cruising) Fuel Maps
- Ignition Timing
- Immobilizer Function
- Cooling Fan Temps
- Rev-Limiter Control
- and new features are added regularly.
Bike Side Data-Link ECU Flashing Kit Includes:
- FTdataLink ECU Interface USB Cable
- Bike-side programming harness to permanently install on your bike
- FT ECU License to allow unlimited flashes for a single ecu
We believe everyone deserves the same tuning technology that until now was reserved for factory riders. With the FTEcu software you can remove the restrictions that the factory must put in place to meet strict street vehicle guidelines. By flashing your ECU you are able to tune your bike without interfering with critical correction factors resulting in smoother power gains than ever before possible.This product is for RACE USE ONLY! The included software will automatically update as new features are added!
Fitment:
- Kawasaki ZX636r 2013-2017
This Interface allows you to easily adjust the following!
- Remove ECU Restrictions
- Engine Braking adjustments
- High Load Fuel Maps (with PC3 and PC5 map importing)
- Low Load (cruising) Fuel Maps
- Fuel Injector Proportioning
- Ignition Timing
- Immobilizer Function
- Cooling Fan Temps
- Rev-Limiter Control
- Remove Top Speed Limiter
- ECU Based Quick-shifting
- Speedometer calibrations
- and new features are added regularly.
Bench ECU Flashing Kit Includes:
- FTdataLink ECU Interface USB Cable
- Bench Flashing Harness to flash your ECU outside of the bike
- Power Supply for Bench flashing
We believe everyone deserves the same tuning technology that until now was reserved for factory riders. With our software you can remove the restrictions that the factory must put in place to meet strict street vehicle guidelines. By flashing your ECU you are able to tune your bike without interfering with critical correction factors resulting in smoother power gains than ever before possible.This product is for RACE USE ONLY! The included software will automatically update as new features are added!
Fitment:
- NOTE: (BIKE SIDE HARNESS ONLY * see separate listing for the bench kits for these bikes)
- GSX-R 600 04-19
- GSX-R 750 04-19
- GSX-R 1000 05-16
- SV1000 05-08
- FZ1 06-09
- FZ8 11-14
- ZX6 09-14
- EX300 13-14
- EX400 18-19
- Ninja 650 18-19
- Z650 18-19
This Interface allows you to easily adjust the following!
- Remove ECU Restrictions
- Engine Braking adjustments
- High Load Fuel Maps (with PC3 and PC5 map importing)
- Low Load (cruising) Fuel Maps
- Fuel Injector Proportioning
- Ignition Timing
- Immobilizer Function
- Cooling Fan Temps
- Rev-Limiter Control
- Remove Top Speed Limiter
- ECU Based Quick-shifting
- Speedometer calibrations
- and new features are added regularly.
Data-Link ECU Flashing Kit Includes:
- FTdataLink ECU Interface USB Cable
- Bike-side programming harness to permanently install on your bike (1 user license mates to single ECU)
We believe everyone deserves the same tuning technology that until now was reserved for factory riders. With our software you can remove the restrictions that the factory must put in place to meet strict street vehicle guidelines. By flashing your ECU you are able to tune your bike without interfering with critical correction factors resulting in smoother power gains than ever before possible.This product is for RACE USE ONLY! The included software will automatically update as new features are added!
Fitment:
- Kawasaki ZX636r 2013-2016
This Interface allows you to easily adjust the following!
- Remove ECU Restrictions
- Engine Braking adjustments
- High Load Fuel Maps (with PC3 and PC5 map importing)
- Low Load (cruising) Fuel Maps
- Fuel Injector Proportioning
- Ignition Timing
- Immobilizer Function
- Cooling Fan Temps
- Rev-Limiter Control
- Remove Top Speed Limiter
- ECU Based Quick-shifting
- Speedometer calibrations
- and new features are added regularly.
Data-Link ECU Flashing Kit Includes:
- FTdataLink ECU Interface USB Cable
- Bike-side programming harness to permanently install on your bike
We believe everyone deserves the same tuning technology that until now was reserved for factory riders. With our software you can remove the restrictions that the factory must put in place to meet strict street vehicle guidelines. By flashing your ECU you are able to tune your bike without interfering with critical correction factors resulting in smoother power gains than ever before possible.This product is for RACE USE ONLY! The included software will automatically update as new features are added!
Fitment:
- Kawasaki ZX6 / 636 2005-2008
This Interface allows you to easily adjust the following!
- Remove ECU Restrictions
- Engine Braking adjustments
- High Load Fuel Maps (with PC3 and PC5 map importing)
- Low Load (cruising) Fuel Maps
- Fuel Injector Proportioning
- Ignition Timing
- Immobilizer Function
- Cooling Fan Temps
- Rev-Limiter Control
- Remove Top Speed Limiter
- ECU Based Quick-shifting
- Speedometer calibrations
- and new features are added regularly.
Data-Link ECU Flashing Kit Includes:
- FTdataLink ECU Interface USB Cable
- Bike-side programming harness to permanently install on your bike
We believe everyone deserves the same tuning technology that until now was reserved for factory riders. With our software you can remove the restrictions that the factory must put in place to meet strict street vehicle guidelines. By flashing your ECU you are able to tune your bike without interfering with critical correction factors resulting in smoother power gains than ever before possible.This product is for RACE USE ONLY! The included software will automatically update as new features are added!
This Interface allows you to easily adjust the following!
- Remove ECU Restrictions
- Engine Braking adjustments
- High Load Fuel Maps (with PC3 and PC5 map importing)
- Low Load (cruising) Fuel Maps
- Fuel Injector Proportioning
- Ignition Timing
- Immobilizer Function
- Cooling Fan Temps
- Rev-Limiter Control
- Remove Top Speed Limiter
- ECU Based Quick-shifting
- Speedometer calibrations
- and new features are added regularly.
Data-Link ECU Flashing Kit Includes:
- FTdataLink ECU Interface USB Cable
- Bike-side programming harness to permanently install on your bike
Bench ECU Flashing Kit Includes:
- FTdataLink ECU Interface USB Cable
- Bench Flashing Harness to flash your ECU outside of the bike
- Power Supply for Bench flashing
We believe everyone deserves the same tuning technology that until now was reserved for factory riders. With our software you can remove the restrictions that the factory must put in place to meet strict street vehicle guidelines. By flashing your ECU you are able to tune your bike without interfering with critical correction factors resulting in smoother power gains than ever before possible.This product is for RACE USE ONLY! The included software will automatically update as new features are added!
Fitment:
- Kawasaki ZX6 / 636 2005-2008
This Interface + software allows you to easily adjust the following!
- Remove ECU Restrictions
- Engine Braking adjustments
- High Load Fuel Maps (with PC3 and PC5 map importing)
- Low Load (cruising) Fuel Maps
- Fuel Injector Proportioning
- Ignition Timing
- Immobilizer Function
- Cooling Fan Temps
- Rev-Limiter Control
- Remove Top Speed Limiter
- ECU Based Quick-shifting
- Speedometer calibrations
- and new features are added regularly.
Bench ECU Flashing Kit Includes:
- FTdataLink ECU Interface USB Cable
- Bench Flashing Harness to flash your ECU outside of the bike
- Power Supply for Bench flashing
We believe everyone deserves the same tuning technology that until now was reserved for factory riders. With the FTEcu software you can remove the restrictions that the factory must put in place to meet strict street vehicle guidelines. By flashing your ECU you are able to tune your bike without interfering with critical correction factors resulting in smoother power gains than ever before possible.This product is for RACE USE ONLY! The included software will automatically update as new features are added!
Popular Brands:
More About Exhaust Systems
We carry the very same aftermarket motorcycle exhaust systems used by professional teams because they give the greatest power gains. Our selection of sportbike exhaust systems from world-class manufacturers, such as Alpha Racing and Akrapovic, eliminate the passenger footpeg bracket and use lightweight, quality materials such as carbon. We also carry a massive selection of full and ¾ sportbike exhaust systems from Yoshimura. Our selection of slip-on exhausts provides a great balance between performance and price—these are amongst the most popular modifications that people make to their street bikes.
Pick up the aftermarket motorcycle exhaust systems and accessories that will improve your bike’s performance today.