HHR Performance -  Accessories

 Accessories
At HHR Performance, we only deal with high-performance, aftermarket motorcycle accessories that are quality built to withstand the rigors associated with high-speed racing. You won’t find any cheaply made items here—professionals use the motorcycle accessories we sell in our online shop on a day to day basis.

Select a Sub-Category

Clear Brand
View  
 Accessories - Blanking plates Fasteners & Swingarm spools
We carry a wide variety of Blanking plates and plugs for all current motorcycles
 Accessories - Fender Eliminators
Eliminate your oem rear fender with these bike specific fender kit's that can hold your license plate and turn signal's
 Accessories - Seat Pads
Racing Seat options
 Accessories - Tank Shrouds & Tank Grips
Pre-Pregnated Carbon fiber shrouds made in an autoclave
 Accessories - Thermal Heat Shield Kits
Thermal Heat sheild for protecting bodywork and for insulating airboxes and battery trays ECU's etc
 Accessories - Windshields
After market Screens for street and race

 Accessories Featured Products

Sort
Clear Brand
View
 
Items 1-34 of 34
Description:
 
Graves Motorsports BMW S1000rr Fender Eliminator Kit. Graves Motorsports Fender Eliminators for the 10-16 BMW S1000 rr are designed to eliminate the bulky stock rear fender to give your bike a clean more race inspired look. The Graves tag kit has been designed to use stock or aftermarket turn signals. There is no cutting required to your stock fender and all hardware is included for easy installation. This is the cleanest and most affordable S1000rr kit made!

Click the "Instructions" tab on this listing for install guide.

Fitment: BMW S1000rr 2010-2018
Item #: FEB-10S1RR-K
Condition: New
Price: $68.95
Sale: $62.06
Save: 10%
Save: $6.89

Qty:

Description:
Graves Motorsports Fender Eliminator Kit Honda CBR1000rr 2006-2007
Graves Motorsports Honda CBR1000rr Fender Eliminator Kit. Graves Motorsports Fender Eliminators for the 06-07 CBR 1000 rrare designed to eliminate the stock rear fender to give the bike a more race inspired and streamlined look. The Graves tag kit has been designed to use stock or aftermarket turn signals. All Graves Motorsports fender eliminator kits are fabricated from black anodized aluminum for long term reliability and great looks. There is no cutting required to your stock fender and all hardware is included for easy installation.

Fitment: Honda CBR1000rr 2006-2007.

Click the logo for Adobe PDF installation instructions:
Item #: FEH-06CBR-K
Condition: New
Price: $39.99
Sale: $35.99
Save: 10%
Save: $4.00
Qty:

Description: Graves Motorsports Universal Motorcycle Swing arm Spool Adapter mounts are designed for motorcycles like the Yamaha FZ-07 / MT-07 / XSR 700 that do not come standard with factory pre drilled spool mounts.

This kit requires drilling and installing the mount rivets. Included with the kit are a set (2) of 6mm Graves swing arm spools. See the instructions tab to answer any mounting questions.

Fitment: Multiple Bikes including the Yamaha FZ-07 2015-2017 / MT-07 2018-2019 / XSR700 2016-2019
Item #: PEU-SA-K
Condition: New
Price: $62.43
Sale: $56.19
Save: 10%
Save: $6.24

Qty:

Description:

Graves Motorsports Honda CBR1000rr (2017-2019) Fender Eliminator Kit with ultra bright LED tag light included. Graves Motorsports Fender Eliminators for the all new CBRs, are designed to eliminate the stock rear fender to give the bike a more race inspired and streamlined look. 

The Graves tag kits are designed to have multiple options. Use with stock Honda rear turn signals, some aftermarket signals (by moving the mounting position of the signal holders - custom mounting hole may apply), or without signals at all by removing the turn signal mounts completely.


All Graves Motorsports Honda fender eliminator kits are fabricated from black power-coated aluminum for long term reliability and great looks. There is no cutting required to your stock fender and all hardware is included for easy installation. Just what your CBR 1000 rr needs to clean up the tail section from Gravesport.com! 

 

Fitment: Honda CBR1000rr 2017-2019

Item #: FEH-17CB1-K
Condition: New
Price: $136.95
Sale: $123.26
Save: 10%
Save: $13.69

Qty:

Description:
 
Graves Motorsports Smog Block Off Plate for Kawasaki Ninja 650 / ER 650. The Graves Motorsports Smog Block Off Plate is designed to seal off the port on the valve cover used by the air injection system (a.k.a smog pumps or AIS). This product is intended for closed course competition use only. Use of this product for any other purpose is strictly prohibited.

Fitment: Kawasaki Ninja 650 / ER 650 2017 +

The air induction system (AIS) burns unburned exhaust gases by injecting fresh air (secondary air) into the exhaust port, reducing the emission of hydrocarbons.

Once this is capped off the air injection system can be safely removed. These Smog Block Off Plates are made from CNC'ed billet aluminum and feature the Graves Motorsports "G" logo. There are three reasons why you want to remove the air injection system from your bike;

  • 1. If you are using your motorcycle on a closed course (racing, track days, etc.) you will want to remove all unnecessary equipment from your bike for reduced weight and ease of maintenance.
  • 2. To get an accurate Air:Fuel (A/F) ratio when dynoing the bike. The air injection system pumps fresh air directly into the exhaust stream in order to burn off any unused fuel. Unfortunately by doing this the A/F ratio is thrown off by the extra "fresh air" in the exhaust stream. By removing the air injection system you can achieve an accurate A/F ratio.
  • 3. This addition will typically remove the majority of popping on deceleration that can be experienced with un-burnt gasses within the emission charcoal chamber. Note: Proper tuning may be needed and this is general feedback.
Item #: AB021
Condition: New
Price: $29.99
Qty:

Description:
 
Graves Motorsports Smog Block Off Plate for Kawasaki Ninja EX400. The Graves Motorsports Smog Block Off Plate is designed to seal off the port on the valve cover used by the air injection system (a.k.a smog pumps or AIS). This product is intended for closed course competition use only. Use of this product for any other purpose is strictly prohibited.

Fitment: Kawasaki Ninja EX400 2018 +

The air induction system (AIS) burns unburned exhaust gases by injecting fresh air (secondary air) into the exhaust port, reducing the emission of hydrocarbons.

Once this is capped off the air injection system can be safely removed. These Smog Block Off Plates are made from CNC'ed billet aluminum and feature the Graves Motorsports "G" logo. There are three reasons why you want to remove the air injection system from your bike;

  • 1. If you are using your motorcycle on a closed course (racing, track days, etc.) you will want to remove all unnecessary equipment from your bike for reduced weight and ease of maintenance.
  • 2. To get an accurate Air:Fuel (A/F) ratio when dynoing the bike. The air injection system pumps fresh air directly into the exhaust stream in order to burn off any unused fuel. Unfortunately by doing this the A/F ratio is thrown off by the extra "fresh air" in the exhaust stream. By removing the air injection system you can achieve an accurate A/F ratio.
  • 3. This addition will typically remove the majority of popping on deceleration that can be experienced with un-burnt gasses within the emission charcoal chamber. Note: Proper tuning may be needed and this is general feedback.
Item #: AB020
Condition: New
Price: $29.99
Qty:

Description: Graves Motorsports Kawasaki Sport Bike 10mm Swingarm Spools. The Graves Motorsports swingarm spool kits are available in 10mm and hard anodized in clear alumin finish. They are direct fitment motorcycle swingarm spool parts for bikes that have threaded spool bosses in the 10mm sizing). See direct fitment chart but these fit most Kawasaki sportbike units listed below.

Kawasaki ZX6R, ZX6, 636, ZX9R, ZX9, ZX10R, ZX10, ZX12R, ZX12, ZX14R, ZX14, ZZR 1200, 600, 900, Ninja (Make sure you have standard swingarms with the 10mm threaded mounts)

ols fit Yamaha motorcycles equipped with 6mm threaded spool bosses
Item #: PE012A
Condition: New
Price: $24.95
Sale: $22.46
Save: 10%
Save: $2.49
Qty:

Description: Graves Motorsports Kawasaki Z125 Pro (2017-2019) Fender Eliminator Kit. Graves Motorsports Fender Eliminators are designed to eliminate the stock rear fender to give the bike a more race inspired and streamlined look.

The Graves tag kit are designed for use with stock Kawasaki rear turn signal.

All Graves Motorsports fender eliminator kits are fabricated from aluminum and finished in black for long term reliability and great looks. All hardware is included for easy installation. Just what your Z125 needs to clean up the tail section from Gravesport.com! See the instructions tab for detailed installation instructions.

Fitment: Kawasaki Z125 2017-2019
Item #: FEK-17Z125-K
Condition: New
Price: $99.95
Sale: $89.96
Save: 10%
Save: $9.99

Qty:

Description:

Graves Motorsports Z650 / Ninja 650 (2017-2019) Fender Eliminator Kit with ultra bright LED tag light included. Graves Motorsports Fender Eliminators are designed to eliminate the stock rear fender to give the bike a more race inspired and streamlined look. 

The Graves tag kits are designed to have multiple options. Use with stock Kawasaki rear turn signals, some aftermarket signals (by moving the mounting position of the signal holders - custom mounting hole may apply), or without signals at all by removing the turn signal mounts completely.


All Graves Motorsports Kawasaki fender eliminator kits are fabricated from black power-coated aluminum for long term reliability and great looks. There is no cutting required to your stock fender and all hardware is included for easy installation. Just what your Z650 needs to clean up the tail section from Gravesport.com! 

Fitment: Kawasaki Z650 2017-2019 / Ninja 650 2017-2019 

Item #: FEK-17Z650-K
Condition: New
Price: $136.95
Sale: $123.26
Save: 10%
Save: $13.69

Qty:

Description: Graves Motorsports Kawasaki ZX-10 Fender Eliminator Kit 2004-2005
Graves Motorsports Kawasaki ZX-10 Fender Eliminator Kit. Graves Motorsports Fender Eliminators for the 04-05 ZX10R are designed to eliminate the stock rear fender to give the bike a more race inspired look. The Graves tag kit has been designed to use stock or aftermarket turn signals. All Graves Motorsports fender eliminator kits are fabricated from black anodized aluminum for long term reliability and great looks. There is no cutting required to your stock fender and all hardware is included for easy installation.
Item #: FE024K
Condition: New
Price: $39.99
Sale: $35.99
Save: 10%
Save: $4.00
Qty:

Description: Graves Motorsports Fender Eliminators for the 04-06 R1 are designed to eliminate the stock rear fender to give the bike a more race inspired and streamlined look. The Graves tag kit are available in two versions to use with stock or aftermarket turn signals. THIS LISTING IS FOR USE WITH STOCK SIGNALS (see separate product for mount without signals). All Graves Motorsports Yamaha fender eliminator kits are fabricated from black anodized aluminum for long term reliability and great looks. There is no cutting required to your stock fender for easy installation. Just what your Yamaha R1 needs to clean up the tail section from Gravesport.com!
Item #: FEK-19ZX6-K
Condition: New
Price: $129.39
Sale: $116.45
Save: 10%
Save: $12.94

Qty:

Description:
 
Graves Motorsports Aprilia RSV4 / Tuono Fender Eliminator Kit. Graves Motorsports Fender Eliminators for the 09-17 RSV4 (all variants), 11-15 Tuono V4 (all variants), 16-17 Tuono 1100 V4 (all variants)  are designed to eliminate the stock rear fender to give the bike a more race inspired look. The Graves tag kit has been designed to use stock or aftermarket turn signals. All Graves Motorsports fender eliminator kits are fabricated from black anodized aluminum for long term reliability and great looks. There is no cutting required to your stock fender and all hardware is included for easy installation. This is the cleanest and most affordable RSV4 kit made!

Click the "Instructions" tab on this listing for install guide.

Fitment: Aprilia 09-17 RSV4 (all variants), 11-15 Tuono V4 (all variants), 16-17 Tuono 1100 V4 (all variants) 
Item #: FEA-10RSV4-K
Condition: New
Price: $94.95
Sale: $85.46
Save: 10%
Save: $9.49

Qty:

Description: Graves Motorsports Ducati 1098 1198 Fender Eliminator
Graves Motorsports Ducati 1098 + 1198 Fender Eliminator Kit. Graves Motorsports Fender Eliminators are designed to eliminate the stock rear fender to give the bike a more race inspired look. The Graves tag kit has been designed to use stock or aftermarket turn signals. All Graves Motorsports fender eliminator kits are fabricated from black anodized aluminum for long term reliability and great looks. There is no cutting required to your stock fender and all hardware is included for easy installation.

Fitment: Ducati 1098 + 1198 models
Item #: FED-0798-K
Condition: New
Price: $59.99
Sale: $53.99
Save: 10%
Save: $6.00

Qty:

Description:
 
Graves Motorsports Smog Block Off Plate for Yamaha YZF-R3. The Graves Motorsports Smog Block Off Plate is designed to seal off the port on the valve cover used by the air injection system (a.k.a smog pumps or AIS). This product is intended for closed course competition use only. Use of this product for any other purpose is strictly prohibited.

Fitment: Yamaha R3 2015 -2019

The air induction system (AIS) burns unburned exhaust gases by injecting fresh air (secondary air) into the exhaust port, reducing the emission of hydrocarbons.

Once this is capped off the air injection system can be safely removed. These Smog Block Off Plates are made from CNC'ed billet aluminum and feature the Graves Motorsports "G" logo. There are three reasons why you want to remove the air injection system from your bike;

  • 1. If you are using your motorcycle on a closed course (racing, track days, etc.) you will want to remove all unnecessary equipment from your bike for reduced weight and ease of maintenance.
  • 2. To get an accurate Air:Fuel (A/F) ratio when dynoing the bike. The air injection system pumps fresh air directly into the exhaust stream in order to burn off any unused fuel. Unfortunately by doing this the A/F ratio is thrown off by the extra "fresh air" in the exhaust stream. By removing the air injection system you can achieve an accurate A/F ratio.
  • 3. This addition will typically remove the majority of popping on deceleration that can be experienced with un-burnt gasses within the emission charcoal chamber. Note: Proper tuning may be needed and this is general feedback.
Item #: AB008
Condition: New
Price: $24.95
Qty:

Description:
Graves Motorsports Smog Block Off Plates for Yamaha model Sport Bikes. Graves Motorsports Smog Block Off Plates are designed to seal off the ports on the valve cover used by the air injection system (a.k.a smog pumps or AIS). Sold as set shownThis product is intended for closed course competition use only. Use of this product for any other purpose is strictly prohibited.
 
 
Fitment:
  • Yamaha R1 / R1M / R1S 2004-2019 + R6 2003-2019 + FZ-10 2017 + MT-10 2018-2019 + R6S 2006-2009 + FZ1 All + FZ8 All + FZ6 All


The air induction system (AIS) burns unburned exhaust gases by injecting fresh air (secondary air) into the exhaust port, reducing the emission of hydrocarbons.

Once these are capped off the air injection system can be safely removed. These Smog Block Off Plates are made from CNC'ed billet aluminum and feature the Graves Motorsports "G" logo. There are three reasons why you want to remove the air injection system from your bike;

  • 1. If you are using your motorcycle on a closed course (racing, track days, etc.) you will want to remove all unnecessary equipment from your bike for reduced weight and ease of maintenance.
  • 2. To get an accurate Air:Fuel (A/F) ratio when dynoing the bike. The air injection system pumps fresh air directly into the exhaust stream in order to burn off any unused fuel. Unfortunately by doing this the A/F ratio is thrown off by the extra "fresh air" in the exhaust stream. By removing the air injection system you can achieve an accurate A/F ratio.
  • 3. This addition will typically remove the majority of popping on deceleration that can be experienced with un-burnt gasses within the emission charcoal chamber. Note: Proper tuning may be needed and this is general feedback.
Item #: AB011
Condition: New
Limited Supply: Only 3 Left!
Price: $38.95
Sale: $32.13
Save: 18%
Save: $6.82
Qty:

Description: Graves Motorsports Sport Bike Swingarm Spools. The Graves Motorsports swingarm spool kits are available in 6mm and 8mm sizes and come hard anodized in your choice of colors. They are direct fitment motorcycle swingarm spool parts for bikes that have threaded spool bosses. Use the pull down menu to select your desired size and color of motorcycle stand spools. Yamaha models such as the R1 and R6 use 6mm sizing. Honda and Suzuki sport bikes use the 8mm sizing. Sold as a set (Pair of 2). Graves Motorsports suggests using the lightweight Graves Swingarm Stand with these spools!

8mm spools fit Honda and Suzuki motorcycles equipped with 8mm threaded spool bosses and Kawasaki EX400
6mm spools fit Yamaha motorcycles equipped with 6mm threaded spool bosses
Item #: PE0
Condition: New
Price: $19.99
Qty:

Description:
 
Works 2.0 Bar Radiator Cap. This radiator cap is designed to keep your engine from overheating by maintaining a higher pressure inside the cooling system thus increasing the boiling point of your coolant.

Fitment: Most Japanese Sportbike Models including the Yamaha YXZ1000r 2016-2019 Side X Side
Item #: W-WRY-06R6-01
Condition: New
Price: $29.95
Qty:

Description:
 
Graves Motorsports WORKS - "Multi Use" quick release plug set. Allows for quick removal of the two windshield fairing mounts on your race bodywork (also fits bikes with bodywork that has flat surface mounting points).

Kit includes 2 plugs, 2 screws and 2 cotter pins. These cnc machined WORKS race plugs were developed for use on the Graves team race bikes.

FITMENT: Multi Bike Fitment for bikes that have flat surface mounting points.
Item #: FB042
Condition: New
Price: $35.99
Qty:

Description:
Graves Motorsports Yamaha FZ-10 / MT-10 Fender Eliminator Kit. Graves Motorsports Fender Eliminators are designed to eliminate the stock rear fender to give the bike a more race inspired and streamlined look. At Graves we put 30 years of racing and manufacturing into the development of our products. 

The Graves tag kit can be used with the stock Yamaha FZ10 / MT10 LED rear turn signals or the adjustable signal mounts can be moved outward for use with the Graves LED signals (some splicing will be required on the FZ10 / MT-10 to join the wires).

All Graves Motorsports Yamaha fender eliminator kits are fabricated from black powder coated aluminum for long term reliability and great looks. There is no cutting required to your stock fender and all hardware is included for easy installation. Just what your Yamaha FZ-10 needs to clean up the tail section from Gravesport.com!

100% developed, tested and manufactured in the USA (Van Nuys California) by Graves Motorsports team of specialists.

Fitment: Yamaha FZ10 2017 / MT-10 2018-2019

Item #: FEY-16FZ10-K
Condition: New
Price: $103.95
Sale: $93.56
Save: 10%
Save: $10.39

Qty:

Description:
 
Graves Motorsports Yamaha R1 2015-2019 Fender Eliminator Kit. Graves Motorsports Fender Eliminators for the all new R1 are designed to eliminate the stock rear fender to give the bike a more race inspired and streamlined look.

The Graves tag kits are designed to have multiple options. Use with stock Yamaha rear turn signals, with Graves aftermarket signals (by moving the mounting position of the signal holders), or without signals at all by removing the turn signal mounts completely. To securely mount the fender kit to the R1's unique tail section the this kit features a machined diamond shape plastic composites "puck." An exclusive Graves Motorsports feature.

All Graves Motorsports Yamaha fender eliminator kits are fabricated from black power coated aluminum for long term reliability and great looks. There is no cutting required to your stock fender and all hardware is included for easy installation. Just what your Yamaha R1 needs to clean up the tail section from Gravesport.com!

Fitment: Yamaha R1 2015-2019
Item #: FEY-15R1-K
Condition: New
Price: $136.95
Sale: $123.26
Save: 10%
Save: $13.69

Qty:

Description:
 
Graves Motorsports Fender Eliminators for the 04-06 R1 are designed to eliminate the stock rear fender to give the bike a more race inspired and streamlined look. The Graves tag kit are available in two versions to use with stock or aftermarket turn signals. THIS LISTING IS FOR USE WITH STOCK SIGNALS (see separate product for mount without signals). All Graves Motorsports Yamaha fender eliminator kits are fabricated from black anodized aluminum for long term reliability and great looks. There is no cutting required to your stock fender for easy installation. Just what your Yamaha R1 needs to clean up the tail section from Gravesport.com! 

Fitment: Yamaha R1 2004-2006
Item #: FEY-04R1-K
Condition: New
Price: $30.00
Sale: $27.00
Save: 10%
Save: $3.00
Qty:

Description:
 
Graves Motorsports Yamaha R1 Fender Eliminator Kit. Graves Motorsports Fender Eliminators for the 07-08 R1 are designed to eliminate the stock rear fender to give the bike a more race inspired and streamlined look. All Graves Motorsports Yamaha fender eliminator kits are fabricated from black anodized aluminum for long term reliability and great looks. There is no cutting required to your stock fender and all hardware is included for easy installation. This kit used the factory turn signals. Just what your Yamaha R1 needs to clean up the tail section from Gravesport.com!

Fitment: Yamaha R1 2007-2008
Item #: FEY-07R1-K
Condition: New
Price: $39.99
Sale: $35.99
Save: 10%
Save: $4.00
Qty:

Description:
 
Graves Motorsports Textured Seat Foam - 9.5mm thick. This super durable, 9.5mm thick textured dual layer seat foam has a high-quality adhesive backing for easy installation. Each piece is water-jet cut in the ideal shape for the Yamaha R1 in race trim but will also fit other models if modified. This lightweight seat foam has been developed to provide the best balance of grip and rider maneuverability possible. The seat foam can easily be trimmed using a razor blade or shaped using a sanding pad. You can find this same seat foam on any Graves Racing Services built R1 as well as many other race bikes in the moto America paddock.

Fitment: Yamaha R1 2015-2017 - Also has a universal fitment and can be used on other bikes with slight modification.
Item #: W-WHY-15R1-02
Condition: New
Price: $99.50
Sale: $89.55
Save: 10%
Save: $9.95

Qty:

Description:
Graves Motorsports Yamaha R3 Fender Eliminator Kit. Graves Motorsports Fender Eliminators for the all R3 are designed to eliminate the stock rear fender to give the bike a more race inspired and streamlined look. 

The Graves tag kits are designed to have multiple options. Use with stock Yamaha rear turn signals, with Graves aftermarket signals (by moving the mounting position of the signal holders), or without signals at all by removing the turn signal mounts completely. To securely mount the fender kit to the R3's unique tail section the this kit features an oversized plate mount that completely covers the open gap created when the stock fender is removed. An exclusive Graves Motorsports feature that is extremely clean and tidy.

All Graves Motorsports Yamaha fender eliminator kits are fabricated from black powercoated aluminum for long term reliability and great looks. There is no cutting required to your stock fender and all hardware is included for easy installation. Just what your Yamaha R3 needs to clean up the tail section from Gravesport.com!

Fitment: Yamaha R3 2015-2018
Item #: FEY-15R3-K
Condition: New
Price: $99.95
Sale: $89.96
Save: 10%
Save: $9.99

Qty:

Description: Graves Motorsports Yamaha R3 Textured Seat Foam - 9.5mm thick.This super durable, 9.5mm thick textured dual layer seat foam has a high-quality adhesive backing for easy installation. Each piece is water-jet cut in the ideal shape for the Yamaha R3 (2015-2018) in race trim but will also fit other models if modified. This lightweight seat foam has been developed to provide the best balance of grip and rider maneuverability possible. The seat foam can easily be trimmed using a razor blade or shaped using a sanding pad. You can find this same seat foam on any Graves Racing Services built R3 as well as many other race bikes in the moto America paddock. Fits Yamaha R3 2015-2018 - Also has a universal fitment and can be used on other bikes with slight modification.
Item #: W-WHY-15R3-01
Condition: New
Limited Supply: Only 1 Left!
Price: $99.50
Sale: $89.55
Save: 10%
Save: $9.95

Qty:

Description:
 
Graves Motorsports Yamaha YZF-R6 Fender Eliminator Kit. Graves Motorsports Fender Eliminators for the 2006-2016 R6 are designed to eliminate the stock rear fender to give the bike a more race inspired and streamlined look.

The Graves tag kit are designed for use with stock Yamaha rear turn signal or Graves signals (may require extending wire leads to fit on some years) when using the adjustable and removable turn signal mounting ears.

All Graves Motorsports Yamaha fender eliminator kits are fabricated from aluminum and finished in black for long term reliability and great looks. All hardware is included for easy installation. Just what your Yamaha YZF-R6 needs to clean up the tail section from Gravesport.com! See the instructions tab for detailed installation instructions.

Fitment: Yamaha R6 2006-2016

Item #: FEY-15R6-K
Condition: New
Price: $75.00
Sale: $67.50
Save: 10%
Save: $7.50

Qty:

Description:
Graves Motorsports Yamaha R6 Seat Foam. Graves Motorsports Textured Seat Foam - 9.5mm thick. 

This super durable, 9.5mm thick textured dual layer seat foam has a high-quality adhesive backing for easy installation. Each piece is water-jet cut in the ideal shape for the Yamaha R6 in race trim but will also fit other models. This lightweight seat foam has been developed to provide the best balance of grip and rider maneuverability possible. The seat foam can easily be trimmed using a razor blade or shaped using a sanding pad. You can find this same seat foam on any Team Graves Yamaha R6, as well as many other race bikes in the AMA Superbike paddock.

Fitment: Yamaha R6 2006-2016 - Also has a universal fitment and can be used on other bikes with slight modification.
Item #: W-WHY-06R6-02
Condition: New
Price: $99.50
Sale: $89.55
Save: 10%
Save: $9.95

Qty:

Description:
Graves Motorsports Yamaha R6 Seat Foam for the 2017-2019 models. Graves Motorsports Textured Seat Foam - 9.5mm thick designed to fit to the Graves' co-developed seat pan kits by Taylor Made.  Also has a universal fitment and can be used on other bikes with slight modification.

This super durable, 9.5mm thick textured dual layer seat foam has a high-quality adhesive backing for easy installation. Each piece is water-jet cut in the ideal shape for the Yamaha R6 in race trim but will also fit other models. This lightweight seat foam has been developed to provide the best balance of grip and rider maneuverability possible. The seat foam can easily be trimmed using a razor blade or shaped using a sanding pad. You can find this same seat foam on any Team Graves Yamaha R6, as well as many other race bikes in the MotoAmerica paddock.

Fitment: Yamaha R6 2017-2019 - Also has a universal fitment and can be used on other bikes with slight modification.
Item #: W-WHY-17R6-01
Condition: New
Price: $149.95
Sale: $134.95
Save: 10%
Save: $15.00

Qty:

Description:

Graves Motorsports Kawasaki Ninja EX300 (2017) Fender Eliminator Kit. Graves Motorsports Fender Eliminators are designed to eliminate the stock rear fender to give the bike a more race inspired and streamlined look. 

The Graves tag kit are designed for use with stock Kawasaki rear turn signal. Micro LED tag light included with the purchase.

All Graves Motorsports fender eliminator kits are fabricated from aluminum and finished in black for long term reliability and great looks. All hardware is included for easy installation. Just what your EX300 needs to clean up the tail section from Gravesport.com! See the instructions tab for detailed installation instructions. 

Fitment: Kawasaki Ninja EX300 2017

Item #: FEK-17EX3-K
Condition: New
Price: $130.95
Sale: $117.85
Save: 10%
Save: $13.10

Qty:

Description:

Graves Motorsports Kawasaki Ninja EX400 (2018-2019) Fender Eliminator Kit. Graves Motorsports Fender Eliminators are designed to eliminate the stock rear fender to give the bike a more race inspired and streamlined look. 

The Graves tag kit are designed for use with stock Kawasaki rear turn signals. They also include the option of removing the signal mounts for use with integrated tail-lights for a more streamlined look. Tag light included with the purchase.

All Graves Motorsports fender eliminator kits are fabricated from aluminum and finished in black for long term reliability and great looks. All hardware is included for easy installation. Just what your Ninja needs to clean up the tail section from Gravesport.com! 


Fitment: Kawasaki Ninja EX400 2018-2019

Item #: FEK-18EX4-K
Condition: New
Price: $136.95
Sale: $123.26
Save: 10%
Save: $13.69

Qty:

Description:
 
Graves Motorsports Yamaha FZ-07 / MT07 Fender Eliminator Kit. Graves Motorsports Fender Eliminator are designed to eliminate the stock rear fender to give the bike a more race inspired and streamlined look.

The Graves tag kit are designed for use with stock Yamaha rear turn signal or Graves signals when using the adjustable and removable turn signal mounting ears.

All Graves Motorsports Yamaha fender eliminator kits are fabricated from aluminum and finished in black for long term reliability and great looks. All hardware is included for easy installation. Just what your Yamaha FZ-07 needs to clean up the tail section from Gravesport.com! See the instructions tab for detailed installation instructions.

Fitment: Yamaha FZ-07 2015-2017 / MT-07 2017-2019
Item #: FEY-14FZ07-K
Condition: New
Price: $99.95
Sale: $89.96
Save: 10%
Save: $9.99

Qty:

Description:
 
Graves Motorsports Yamaha R1 Carbon Heat Shield for the 2009-2014 models. This carbon fiber guard works best when combined with any combination of the LINK ™ exhaust components.

Fitment: Yamaha R1 2009-2014
Item #: HSY-09R1-RC
Condition: New
Price: $150.00

Qty:

Description:

Graves Motorsports Yamaha R6 (2017-2019) Fender Eliminator Kit with ultra bright LED tag light included. Graves Motorsports Fender Eliminators for the all new R6 are designed to eliminate the stock rear fender to give the bike a more race inspired and streamlined look. 

The Graves tag kits are designed to have multiple options. Use with stock Yamaha rear turn signals, with Graves aftermarket signals (by moving the mounting position of the signal holders), or without signals at all by removing the turn signal mounts completely.

All Graves Motorsports Yamaha fender eliminator kits are fabricated from black power-coated aluminum for long term reliability and great looks. There is no cutting required to your stock fender and all hardware is included for easy installation. Just what your Yamaha R6 needs to clean up the tail section from Gravesport.com! 

Fitment: Yamaha R6 (2017-2019)

Item #: FEY-17R6-K
Condition: New
Price: $131.95
Sale: $118.76
Save: 10%
Save: $13.19

Qty:

Description:

Graves Motorsports Swing-arm 8mm Spools for the Kawasaki ZX-10R / ZX-6R / Ninja 400. Precision CNC machined from 6061 T6 billet aluminum and black anodized then laser etched

Fitment:

  • Kawasaki ZX-10R 2016-2019
  • Kawasaki ZX-6R 2019
  • Kawasaki Ninja 400 18-19
  • (Make sure your year is listed older models use 10mm spools)
Item #: PE013K
Condition: New
Price: $24.99
Sale: $22.49
Save: 10%
Save: $2.50
Qty:

Items 1-34 of 34


More About  Accessories

If you’re a fan of the sport, want to keep yourself safe on the road, or need to make minor-to-extreme modifications to your bike and gear, HHR Performance has you covered. We’re your top online source for motorcycle accessories—you’ll never look back.

Amongst our online collection of aftermarket motorcycle accessories, you’ll find high-quality components for use with your motorcycle helmets, such as replacement straps, pads, visors, chin vents, and more from Arai Helmets. Browse our selection today of high-performance motorcycle accessories and ensure your safety on the road or track.