- Home »
- Catalog »
- Hand & Foot Controls »
- Button Pods On/Off switches and Keyless delete kits
HHR Performance - Button Pods On/Off switches and Keyless delete kits
CNC billet Control pods to replace oem plastic housing
Browse Button Pods On/Off switches and Keyless delete kits Products
Items 61-90 of 90
- Prev
- Page 2 of 2
Description:
APEX RACING DEVELOPMENT TWO BUTTON ENGINE START RACE SWITCH FOR YAMAHA R3 2015+ YR3R2
Two (2) button right handle bar race switch for Yamaha YZF-R3 2015+
Part No: YR3R2
- The switch is a direct plug and play replacement for OEM ignition switch for Yamaha R3 all models 2015 to 2019
- Ideal for racing and street application, to save space and weight where it matters.
- A must have if you are upgrading your throttle housing to a quick turn throttle. From the factory bike has a combined throttle and switch housing like Motion Pro or Domino. Therefore replacement of throttle housing necessitates replacement of the switch. Product picture depicts our switch alongside a Domino forged quick turn throttle.This setup saves room on the handlebar and is much more resilient and durable in case of a crash.
- Designed for 22 mm standard clip on handle bars.
- Main functions are ignition circuit activator / breaker and starter activation.
- Designed and CNC machined in United States from aircraft grade aluminium to be the smallest and lightest on the market.
- Premium buttons with gold plated contact surfaces, manufactured in United States by Otto Engineering
Note1: We have a brake master mounted version of the switch with inline and offset mounting bores. Part No YR3R2RCSO and YR3R2RCSI
Note2: Switch does not have the hazard light button.
Note3: Brake light cables are not supplied by default but can be shipped on request.
Two (2) button right handle bar race switch for Yamaha YZF-R3 2015+
Part No: YR3R2
- The switch is a direct plug and play replacement for OEM ignition switch for Yamaha R3 all models 2015 to 2019
- Ideal for racing and street application, to save space and weight where it matters.
- A must have if you are upgrading your throttle housing to a quick turn throttle. From the factory bike has a combined throttle and switch housing like Motion Pro or Domino. Therefore replacement of throttle housing necessitates replacement of the switch. Product picture depicts our switch alongside a Domino forged quick turn throttle.This setup saves room on the handlebar and is much more resilient and durable in case of a crash.
- Designed for 22 mm standard clip on handle bars.
- Main functions are ignition circuit activator / breaker and starter activation.
- Designed and CNC machined in United States from aircraft grade aluminium to be the smallest and lightest on the market.
- Premium buttons with gold plated contact surfaces, manufactured in United States by Otto Engineering
Note1: We have a brake master mounted version of the switch with inline and offset mounting bores. Part No YR3R2RCSO and YR3R2RCSI
Note2: Switch does not have the hazard light button.
Note3: Brake light cables are not supplied by default but can be shipped on request.
Item #: YR3R2
Condition:
New
Factory pre-order only for all APX Racing products have 1-to-2-week ETA for production from the manufacturer. Feel free to contact us if you have any questions.
Price: $205.00
Description:
APEX RACING DEVELOPMENT TWO BUTTON ENGINE START RACE SWITCH FOR YAMAHA R3 2015+ BRAKE MOUNTED INLINE YR3R2RCSI
Two (2) button right handle bar race switch for Yamaha YZF-R3 2015+ Brake Mounted Inline
Part No: YR3R2RCSI
- The switch is a direct plug and play replacement for OEM ignition switch for Yamaha R3 all models 2015 to 2019
- Mounts as back bracket for your brake master cylinder. Compatible with OEM, Brembo RCS, Brembo Corsa Corta brake masters. Inline mounting bores. Ideal for racing and street application, to save space and weight where it matters.
- A must have if you are upgrading your throttle housing to a quick turn throttle. From the factory bike has a combined throttle and switch housing like Motion Pro or Domino. Therefore replacement of throttle housing necessitates replacement of the switch. This setup saves room on the handlebar and is much more resilient and durable in case of a crash. Product picture depicts the switch alongside a billet throttle housing.
- Designed for 22 mm standard clip on handle bars.
- Main functions are ignition circuit activator / breaker and starter activation.
- Designed and CNC machined in United States from aircraft grade aluminium to be the smallest and lightest on the market.
- Premium buttons with gold plated contact surfaces, manufactured in United States by Otto Engineering
Note1: We have an offset mounting bore version of the switch for Billet Brembo master pumps. Part No YR3R2RCSO
Note2: Switch does not have the hazard light button.
Note3: Brake light cables are not supplied by default but can be shipped on request.
Two (2) button right handle bar race switch for Yamaha YZF-R3 2015+ Brake Mounted Inline
Part No: YR3R2RCSI
- The switch is a direct plug and play replacement for OEM ignition switch for Yamaha R3 all models 2015 to 2019
- Mounts as back bracket for your brake master cylinder. Compatible with OEM, Brembo RCS, Brembo Corsa Corta brake masters. Inline mounting bores. Ideal for racing and street application, to save space and weight where it matters.
- A must have if you are upgrading your throttle housing to a quick turn throttle. From the factory bike has a combined throttle and switch housing like Motion Pro or Domino. Therefore replacement of throttle housing necessitates replacement of the switch. This setup saves room on the handlebar and is much more resilient and durable in case of a crash. Product picture depicts the switch alongside a billet throttle housing.
- Designed for 22 mm standard clip on handle bars.
- Main functions are ignition circuit activator / breaker and starter activation.
- Designed and CNC machined in United States from aircraft grade aluminium to be the smallest and lightest on the market.
- Premium buttons with gold plated contact surfaces, manufactured in United States by Otto Engineering
Note1: We have an offset mounting bore version of the switch for Billet Brembo master pumps. Part No YR3R2RCSO
Note2: Switch does not have the hazard light button.
Note3: Brake light cables are not supplied by default but can be shipped on request.
Item #: YR3R2RCSI
Condition:
New
Factory pre-order only for all APX Racing products have 1-to-2-week ETA for production from the manufacturer. Feel free to contact us if you have any questions.
Price: $205.00
Description:
APEX RACING DEVELOPMENT TWO BUTTON ENGINE START RACE SWITCH FOR YAMAHA R3 2015+ BRAKE MOUNTED OFFSET YR3R2RCSO
Two (2) button right handle bar race switch for Yamaha YZF-R3 2015+ Brake Mounted Offset
Part No: YR3R2RCSO
- The switch is a direct plug and play replacement for OEM ignition switch for Yamaha R3 all models 2015 to 2019
- Mounts as back bracket for your brake master cylinder. Compatible with Brembo billet race pumps. Offset mounting bores. Ideal for racing and street application, to save space and weight where it matters.
- A must have if you are upgrading your throttle housing to a quick turn throttle. From the factory bike has a combined throttle and switch housing like Motion Pro or Domino. Therefore replacement of throttle housing necessitates replacement of the switch. This setup saves room on the handlebar and is much more resilient and durable in case of a crash. Product picture depicts the switch alongside a billet throttle housing.
- Designed for 22 mm standard clip on handle bars.
- Main functions are ignition circuit activator / breaker and starter activation.
- Designed and CNC machined in United States from aircraft grade aluminium to be the smallest and lightest on the market.
- Premium buttons with gold plated contact surfaces, manufactured in United States by Otto Engineering
Note1: We have an offset mounting bore version of the switch for Billet Brembo master pumps. Part No YR3R2RCSO
Note2: Switch does not have the hazard light button.
Note3: Brake light cables are not supplied by default but can be shipped on request.
Two (2) button right handle bar race switch for Yamaha YZF-R3 2015+ Brake Mounted Offset
Part No: YR3R2RCSO
- The switch is a direct plug and play replacement for OEM ignition switch for Yamaha R3 all models 2015 to 2019
- Mounts as back bracket for your brake master cylinder. Compatible with Brembo billet race pumps. Offset mounting bores. Ideal for racing and street application, to save space and weight where it matters.
- A must have if you are upgrading your throttle housing to a quick turn throttle. From the factory bike has a combined throttle and switch housing like Motion Pro or Domino. Therefore replacement of throttle housing necessitates replacement of the switch. This setup saves room on the handlebar and is much more resilient and durable in case of a crash. Product picture depicts the switch alongside a billet throttle housing.
- Designed for 22 mm standard clip on handle bars.
- Main functions are ignition circuit activator / breaker and starter activation.
- Designed and CNC machined in United States from aircraft grade aluminium to be the smallest and lightest on the market.
- Premium buttons with gold plated contact surfaces, manufactured in United States by Otto Engineering
Note1: We have an offset mounting bore version of the switch for Billet Brembo master pumps. Part No YR3R2RCSO
Note2: Switch does not have the hazard light button.
Note3: Brake light cables are not supplied by default but can be shipped on request.
Item #: YR3R2RCSO
Condition:
New
Factory pre-order only for all APX Racing products have 1-to-2-week ETA for production from the manufacturer. Feel free to contact us if you have any questions.
Price: $205.00
Description:
APEX RACING DEVELOPMENT TWO BUTTON ENGINE SWITCH FOR MV AGUSTA F3, F4 DUP12L5ME
- The switch is a direct plug and play replacement for OEM ignition switch for all Panigale models with auxiliary quick change (paddle) switch.
- Ideal for racing and street application, to save space and weight where it matters. This model takes weight savings to another level - only 45 grams!!! Switch is acting as a back mounting bracket for your front brake master cylinder.
- Fits OEM and Brembo RCS master cylinders. Note !!! - Inline fasteners bore.
- Designed for 22 mm standard clip on handle bars.
- Switch functions: engine run/stop (maintained red) and starter activation (momentary black, LAP/Passing (momentary blue).
- Note !!! - To be used with a 5 button left switch Part No.DUP12L5ME+
- Designed and CNC machined in United States from aircraft grade aluminum to be the smallest and lightest on the market.
- Premium, military grade buttons with gold plated contact surfaces, manufactured in United States by Otto.
- Plug and play with OEM connector.
- The switch is a direct plug and play replacement for OEM ignition switch for all Panigale models with auxiliary quick change (paddle) switch.
- Ideal for racing and street application, to save space and weight where it matters. This model takes weight savings to another level - only 45 grams!!! Switch is acting as a back mounting bracket for your front brake master cylinder.
- Fits OEM and Brembo RCS master cylinders. Note !!! - Inline fasteners bore.
- Designed for 22 mm standard clip on handle bars.
- Switch functions: engine run/stop (maintained red) and starter activation (momentary black, LAP/Passing (momentary blue).
- Note !!! - To be used with a 5 button left switch Part No.DUP12L5ME+
- Designed and CNC machined in United States from aircraft grade aluminum to be the smallest and lightest on the market.
- Premium, military grade buttons with gold plated contact surfaces, manufactured in United States by Otto.
- Plug and play with OEM connector.
Item #: TBESFMV-F3/F4
Condition:
New
Factory pre-order only for all APX Racing products have 1-to-2-week ETA for production from the manufacturer. Feel free to contact us if you have any questions.
Price: $205.00
Description:
APEX RACING DEVELOPMENT TWO BUTTON ENGINE SWITCH FOR MV AGUSTA F3, F4 (BREMBO MOUNT INLINE)
TBESFMV-F3/F4-BMI
- The switch is a direct plug and play replacement for OEM ignition switch for MV AGUSTA F3, F4, BRUTALE (2011 onwards).
- Provides unparalleled weight and space savings. Only 40 grams. Mounts as a back bracket for brake master cylinder.
- Inline mounting bore.
- For LAP function please see our 3 button model.
- Ideal for racing and street application, to save space and weight where it matters.
- A must have if you are upgrading to an RCS Brembo master brake cylinders.
- Designed for 22 mm standard clip on handle bars.
- Main functions are ignition circuit activator / breaker and starter activation.
- Designed and CNC machined in United States from aircraft grade aluminium to be the smallest and lightest on the market.
- Premium military spec buttons with gold plated contact surfaces, manufactured in United States by Otto Engineering
- The switch is a direct plug and play replacement for OEM ignition switch for MV AGUSTA F3, F4, BRUTALE (2011 onwards).
- Provides unparalleled weight and space savings. Only 40 grams. Mounts as a back bracket for brake master cylinder.
- Inline mounting bore.
- For LAP function please see our 3 button model.
- Ideal for racing and street application, to save space and weight where it matters.
- A must have if you are upgrading to an RCS Brembo master brake cylinders.
- Designed for 22 mm standard clip on handle bars.
- Main functions are ignition circuit activator / breaker and starter activation.
- Designed and CNC machined in United States from aircraft grade aluminium to be the smallest and lightest on the market.
- Premium military spec buttons with gold plated contact surfaces, manufactured in United States by Otto Engineering
Item #: TBESFMV-F3/F4-BMI
Condition:
New
Factory pre-order only for all APX Racing products have 1-to-2-week ETA for production from the manufacturer. Feel free to contact us if you have any questions.
Price: $205.00
Description:
APEX RACING DEVELOPMENT TWO BUTTON ENGINE SWITCH FOR MV AGUSTA F3, F4 (BREMBO MOUNT OFFSET)
TBESFMV-F3/F4-BMO
- The switch is a direct plug and play replacement for OEM ignition switch for MV AGUSTA F3, F4, BRUTALE (2011 onwards).
- Provides unparalleled weight and space savings. Only 40 grams. Mounts as a back bracket for brake master cylinder.
- Offset mounting bore (7mm).
- For LAP function please see our 3 button model.
- Ideal for racing and street application, to save space and weight where it matters.
- A must have if you are upgrading to an RCS Brembo master brake cylinders.
- Designed for 22 mm standard clip on handle bars.
- Main functions are ignition circuit activator / breaker and starter activation.
- Designed and CNC machined in United States from aircraft grade aluminium to be the smallest and lightest on the market.
- Premium military spec buttons with gold plated contact surfaces, manufactured in United States by Otto Engineering
- The switch is a direct plug and play replacement for OEM ignition switch for MV AGUSTA F3, F4, BRUTALE (2011 onwards).
- Provides unparalleled weight and space savings. Only 40 grams. Mounts as a back bracket for brake master cylinder.
- Offset mounting bore (7mm).
- For LAP function please see our 3 button model.
- Ideal for racing and street application, to save space and weight where it matters.
- A must have if you are upgrading to an RCS Brembo master brake cylinders.
- Designed for 22 mm standard clip on handle bars.
- Main functions are ignition circuit activator / breaker and starter activation.
- Designed and CNC machined in United States from aircraft grade aluminium to be the smallest and lightest on the market.
- Premium military spec buttons with gold plated contact surfaces, manufactured in United States by Otto Engineering
Item #: TBESFMV-F3/F4-BMO
Condition:
New
Factory pre-order only for all APX Racing products have 1-to-2-week ETA for production from the manufacturer. Feel free to contact us if you have any questions.
Price: $205.00
Description:
APEX RACING DEVELOPMENT TWO BUTTON ENGINE SWITCH FOR SUZUKI GSXR 1000 2017+ S117R2E
Two (2) button right handle bar ignition race switch for 2017 GSXR 1000
Part No: S117R2E
- The switch is a direct plug and play replacement for OEM ignition switch for all 2017 SUZUKI GSXR models.
- Ideal for racing and street application, to save space and weight where it matters.
- A must have if you are upgrading to an RCS Brembo master brake cylinders. With aftermarket brake master cylinders there is not enough space on the handle bar for OEM ignition switch.
- Designed for 22 mm standard clip on handle bars.
- Main functions are ignition circuit activator / breaker and starter activation.
- Designed and CNC machined in United States from aircraft grade aluminium to be the smallest and lightest on the market.
- Premium buttons with gold plated contact surfaces, manufactured in United Kingdom by Otto engineering.
Two (2) button right handle bar ignition race switch for 2017 GSXR 1000
Part No: S117R2E
- The switch is a direct plug and play replacement for OEM ignition switch for all 2017 SUZUKI GSXR models.
- Ideal for racing and street application, to save space and weight where it matters.
- A must have if you are upgrading to an RCS Brembo master brake cylinders. With aftermarket brake master cylinders there is not enough space on the handle bar for OEM ignition switch.
- Designed for 22 mm standard clip on handle bars.
- Main functions are ignition circuit activator / breaker and starter activation.
- Designed and CNC machined in United States from aircraft grade aluminium to be the smallest and lightest on the market.
- Premium buttons with gold plated contact surfaces, manufactured in United Kingdom by Otto engineering.
Item #: S117R2E
Condition:
New
Factory pre-order only for all APX Racing products have 1-to-2-week ETA for production from the manufacturer. Feel free to contact us if you have any questions.
Price: $205.00
Description:
APEX RACING DEVELOPMENT TWO BUTTON ENGINE SWITCH FOR SUZUKI GSXR 1000 2017+ (BRAKE MOUNT OFFSET)
TBESFS-BMO
- The switch is a direct plug and play replacement for OEM ignition switch for 2017 Suzuki GSXR 1000
- Provides unparalleled weight and space savings. Only 40 grams. Mounts as a back bracket for brake master cylinder.
- Offset mounting bore (7mm) ( WILL NOT FIT RCS AND CORSA CORTA)
- Please see our 3 button model for auziliary Lap or Tail light functions.
- Ideal for racing and street application, to save space and weight where it matters.
- A must have if you are upgrading to an RCS Brembo master brake cylinders.
- Designed for 22 mm standard clip on handle bars.
- Main functions are ignition circuit activator / breaker and starter activation.
- Designed and CNC machined in United States from aircraft grade aluminium to be the smallest and lightest on the market.
- Premium military spec buttons with gold plated contact surfaces, manufactured in United States by Otto Engineering
- The switch is a direct plug and play replacement for OEM ignition switch for 2017 Suzuki GSXR 1000
- Provides unparalleled weight and space savings. Only 40 grams. Mounts as a back bracket for brake master cylinder.
- Offset mounting bore (7mm) ( WILL NOT FIT RCS AND CORSA CORTA)
- Please see our 3 button model for auziliary Lap or Tail light functions.
- Ideal for racing and street application, to save space and weight where it matters.
- A must have if you are upgrading to an RCS Brembo master brake cylinders.
- Designed for 22 mm standard clip on handle bars.
- Main functions are ignition circuit activator / breaker and starter activation.
- Designed and CNC machined in United States from aircraft grade aluminium to be the smallest and lightest on the market.
- Premium military spec buttons with gold plated contact surfaces, manufactured in United States by Otto Engineering
Item #: TBESFS-BMO
Condition:
New
Factory pre-order only for all APX Racing products have 1-to-2-week ETA for production from the manufacturer. Feel free to contact us if you have any questions.
Price: $205.00
Description:
APEX RACING DEVELOPMENT TWO BUTTON ENGINE SWITCH FOR SUZUKI GSXR 1000 2017+ (BREMBO MOUNT INLINE)
- The switch is a direct plug and play replacement for OEM ignition switch for 2017 Suzuki GSXR 1000
- Provides unparalleled weight and space savings. Only 40 grams. Mounts as a back bracket for brake master cylinder.
- Inline Mounting Bore. Fits most brake masters, RCS, Corsa Corta, OEM
- Please see our 3 button model for auziliary Lap or Tail light functions.
- Ideal for racing and street application, to save space and weight where it matters.
- A must have if you are upgrading to an RCS Brembo master brake cylinders.
- Designed for 22 mm standard clip on handle bars.
- Main functions are ignition circuit activator / breaker and starter activation.
- Designed and CNC machined in United States from aircraft grade aluminium to be the smallest and lightest on the market.
- Premium military spec buttons with gold plated contact surfaces, manufactured in United States by Otto Engineering
- The switch is a direct plug and play replacement for OEM ignition switch for 2017 Suzuki GSXR 1000
- Provides unparalleled weight and space savings. Only 40 grams. Mounts as a back bracket for brake master cylinder.
- Inline Mounting Bore. Fits most brake masters, RCS, Corsa Corta, OEM
- Please see our 3 button model for auziliary Lap or Tail light functions.
- Ideal for racing and street application, to save space and weight where it matters.
- A must have if you are upgrading to an RCS Brembo master brake cylinders.
- Designed for 22 mm standard clip on handle bars.
- Main functions are ignition circuit activator / breaker and starter activation.
- Designed and CNC machined in United States from aircraft grade aluminium to be the smallest and lightest on the market.
- Premium military spec buttons with gold plated contact surfaces, manufactured in United States by Otto Engineering
Item #: BTESFS-BMI
Condition:
New
Factory pre-order only for all APX Racing products have 1-to-2-week ETA for production from the manufacturer. Feel free to contact us if you have any questions.
Price: $205.00
Description:
APEX RACING DEVELOPMENT TWO BUTTON ENGINE SWITCH FOR YAMAHA R6 2008-2016
TBESFY-R6-08-16
- The switch is a direct plug and play replacement for OEM right handlebar engine switch for previous generation Yamaha R6 2008-2016
- Ideal for racing and street application, to save space and weight where it matters.
- Replaces OEM plastic handlebar switch with billet aluminum switch housing, providing weight and space savings and superior crash resistance.
- Designed for 22 mm standard clip on handle bars.
- Switch functions: engine run/stop (maintained top), starter activation (momentary bottom)
- Designed and CNC machined in United States from aircraft grade aluminum to be the smallest and lightest on the market.
- Premium, military grade buttons with gold plated contact surfaces, manufactured in United States by Otto Engineering.
- Comes Plug and play with OEM connector.
- Also available in master brake cylinder mounted switch housing. Part # YR616R2EMRCS
- The switch is a direct plug and play replacement for OEM right handlebar engine switch for previous generation Yamaha R6 2008-2016
- Ideal for racing and street application, to save space and weight where it matters.
- Replaces OEM plastic handlebar switch with billet aluminum switch housing, providing weight and space savings and superior crash resistance.
- Designed for 22 mm standard clip on handle bars.
- Switch functions: engine run/stop (maintained top), starter activation (momentary bottom)
- Designed and CNC machined in United States from aircraft grade aluminum to be the smallest and lightest on the market.
- Premium, military grade buttons with gold plated contact surfaces, manufactured in United States by Otto Engineering.
- Comes Plug and play with OEM connector.
- Also available in master brake cylinder mounted switch housing. Part # YR616R2EMRCS
Item #: TBESFY-R6-08-16
Condition:
New
Factory pre-order only for all APX Racing products have 1-to-2-week ETA for production from the manufacturer. Feel free to contact us if you have any questions.
Price: $205.00
Description:
APEX RACING DEVELOPMENT TWO BUTTON RACE SWITCH FOR 2019+ KAWASAKI ZX-6R 636 K619R2E
Two (2) button right handle bar race switch for Kawasaki ZX 6R 636 2019
Part No: K619R2E
- The switch is a direct plug and play replacement for OEM ignition switch for Kawasaki Ninja ZX-6R 2019+
- Ideal for racing and street application, to save space and weight where it matters.
- A must have if you are upgrading to an RCS Brembo master brake cylinders. With aftermarket brake master cylinders there is not enough space on the handle bar for OEM ignition switch.
NOTE: We have a brake master mounted version of the switch with inline and offset mounting bores. Part No K619R2ERCSI, K619R2ERCSO
- Designed for 22 mm standard clip on handle bars.
- Main functions are ignition circuit activator / breaker and starter activation.
- Designed and CNC machined in United States from aircraft grade aluminium to be the smallest and lightest on the market.
- Premium buttons with gold plated contact surfaces, manufactured in United States by Otto Engineering
Two (2) button right handle bar race switch for Kawasaki ZX 6R 636 2019
Part No: K619R2E
- The switch is a direct plug and play replacement for OEM ignition switch for Kawasaki Ninja ZX-6R 2019+
- Ideal for racing and street application, to save space and weight where it matters.
- A must have if you are upgrading to an RCS Brembo master brake cylinders. With aftermarket brake master cylinders there is not enough space on the handle bar for OEM ignition switch.
NOTE: We have a brake master mounted version of the switch with inline and offset mounting bores. Part No K619R2ERCSI, K619R2ERCSO
- Designed for 22 mm standard clip on handle bars.
- Main functions are ignition circuit activator / breaker and starter activation.
- Designed and CNC machined in United States from aircraft grade aluminium to be the smallest and lightest on the market.
- Premium buttons with gold plated contact surfaces, manufactured in United States by Otto Engineering
Item #: K619R2E
Condition:
New
Factory pre-order only for all APX Racing products have 1-to-2-week ETA for production from the manufacturer. Feel free to contact us if you have any questions.
Price: $210.00
Description:
APEX RACING DEVELOPMENT TWO BUTTON RACE SWITCH FOR 2019+ KAWASAKI ZX-6R 636 BRAKE MASTER MOUNTED INLINE K619R2ERCS
Two (2) button right handle bar race switch for Kawasaki ZX 6R 636 2019
Part No: K619R2ERCSI
- The switch is a direct plug and play replacement for OEM ignition switch for Kawasaki Ninja ZX-6R 2019+
- Ideal for racing and street application, to save space and weight where it matters. mounts as a back bracket for your brake master cylinder. ( Inline mounting bores ).
- A must have if you are upgrading to an RCS Brembo master brake cylinders. With aftermarket brake master cylinders there is not enough space on the handle bar for OEM ignition switch.
- Designed for 22 mm standard clip on handle bars.
- Main functions are ignition circuit activator / breaker and starter activation. Comes Plug and Play with OEM connector.
- Designed and CNC machined in United States from aircraft grade aluminium to be the smallest and lightest on the market.
- Premium buttons with gold plated contact surfaces, manufactured in United States by Otto Engineering
Two (2) button right handle bar race switch for Kawasaki ZX 6R 636 2019
Part No: K619R2ERCSI
- The switch is a direct plug and play replacement for OEM ignition switch for Kawasaki Ninja ZX-6R 2019+
- Ideal for racing and street application, to save space and weight where it matters. mounts as a back bracket for your brake master cylinder. ( Inline mounting bores ).
- A must have if you are upgrading to an RCS Brembo master brake cylinders. With aftermarket brake master cylinders there is not enough space on the handle bar for OEM ignition switch.
- Designed for 22 mm standard clip on handle bars.
- Main functions are ignition circuit activator / breaker and starter activation. Comes Plug and Play with OEM connector.
- Designed and CNC machined in United States from aircraft grade aluminium to be the smallest and lightest on the market.
- Premium buttons with gold plated contact surfaces, manufactured in United States by Otto Engineering
Item #: K619R2ERCS
Condition:
New
Factory pre-order only for all APX Racing products have 1-to-2-week ETA for production from the manufacturer. Feel free to contact us if you have any questions.
Price: $205.00
Description:
APEX RACING DEVELOPMENT TWO BUTTON RACE SWITCH FOR 2019+ KAWASAKI ZX-6R 636 BRAKE MASTER MOUNTED OFFSET K619R2ERCSO
Two (2) button right handle bar race switch for Kawasaki ZX 6R 636 2019
Part No: K619R2ERCSO
- The switch is a direct plug and play replacement for OEM ignition switch for Kawasaki Ninja ZX-6R 2019+
- Ideal for racing and street application, to save space and weight where it matters. mounts as a back bracket for your brake master cylinder. ( Offset mounting bores ).
- A must have if you are upgrading to an RCS Brembo master brake cylinders. With aftermarket brake master cylinders there is not enough space on the handle bar for OEM ignition switch.
- Designed for 22 mm standard clip on handle bars.
- Main functions are ignition circuit activator / breaker and starter activation. Comes Plug and Play with OEM connector.
- Designed and CNC machined in United States from aircraft grade aluminium to be the smallest and lightest on the market.
- Premium buttons with gold plated contact surfaces, manufactured in United States by Otto Engineering
Two (2) button right handle bar race switch for Kawasaki ZX 6R 636 2019
Part No: K619R2ERCSO
- The switch is a direct plug and play replacement for OEM ignition switch for Kawasaki Ninja ZX-6R 2019+
- Ideal for racing and street application, to save space and weight where it matters. mounts as a back bracket for your brake master cylinder. ( Offset mounting bores ).
- A must have if you are upgrading to an RCS Brembo master brake cylinders. With aftermarket brake master cylinders there is not enough space on the handle bar for OEM ignition switch.
- Designed for 22 mm standard clip on handle bars.
- Main functions are ignition circuit activator / breaker and starter activation. Comes Plug and Play with OEM connector.
- Designed and CNC machined in United States from aircraft grade aluminium to be the smallest and lightest on the market.
- Premium buttons with gold plated contact surfaces, manufactured in United States by Otto Engineering
Item #: K619R2ERCSO
Condition:
New
Factory pre-order only for all APX Racing products have 1-to-2-week ETA for production from the manufacturer. Feel free to contact us if you have any questions.
Price: $205.00
Description:
Apex Racing Development designed this Switch as a direct plug and play replacement for left handlebar switch for latest generation 2017 Yamaha R6. Ideal for Racing application, to save space and weight where it matters. Switch functions: Traction Control Increase / Decrease while omitting all street functions.
Item #: YR617L2TC
Condition:
New
Factory pre-order only for all APX Racing products have 1-to-2-week ETA for production from the manufacturer. Feel free to contact us if you have any
questions.
Price: $231.00
Description:
APEX RACING DEVELOPMENT TWO BUTTON RACE SWITCH FOR YAMAHA R6 2017+
TBRSFY-R6
- The switch is a direct plug and play replacement for OEM left handlebar switch for latest generation Yamaha R6 (2017+)
- Unparalleled weight savings. Only 50 grams. Compare to over 100grm for OEM.
- Switch functions: Traction control Increase + and decrease -
- All street functions are omitted.
- Designed for OEM ECU and harness.
- Premium, military grade buttons with gold plated contact surfaces, manufactured in United States by Otto Engineering.
- Comes Plug and play with OEM connector.
- Designed for 22 mm standard clip on handle bars.
- For bikes equipped with Flash Tune race package we recommend a 5 button left switch with PIT limiter, launch control and tail light activator. Part #YR617FL5
- Designed and CNC machined in United States from aircraft grade aluminum to be the smallest and lightest on the market.
- The switch is a direct plug and play replacement for OEM left handlebar switch for latest generation Yamaha R6 (2017+)
- Unparalleled weight savings. Only 50 grams. Compare to over 100grm for OEM.
- Switch functions: Traction control Increase + and decrease -
- All street functions are omitted.
- Designed for OEM ECU and harness.
- Premium, military grade buttons with gold plated contact surfaces, manufactured in United States by Otto Engineering.
- Comes Plug and play with OEM connector.
- Designed for 22 mm standard clip on handle bars.
- For bikes equipped with Flash Tune race package we recommend a 5 button left switch with PIT limiter, launch control and tail light activator. Part #YR617FL5
- Designed and CNC machined in United States from aircraft grade aluminum to be the smallest and lightest on the market.
Item #: TBRSFY-R6
Condition:
New
Factory pre-order only for all APX Racing products have 1-to-2-week ETA for production from the manufacturer. Feel free to contact us if you have any
questions.
Price: $208.00
Description:
APEX RACING DEVELOPMENT TWO BUTTON ROAD & TRACK KILL SWITCH FOR HONDA GROM
HGR2
TWO BUTTON ROAD & TRACK KILL SWITCH FOR HONDA GROM
Part # HGR2
- The switch is a direct plug and play replacement for OEM right handlebar switch for Honda Grom motorcycles (all years)
- Unparalleled weight and space savings. Only 40 grams. Compare to over 100grm for OEM.
Switch functions: Engine Run/Stop, Starter (brake light cabling included)
Completely plug and play.
- Premium, military grade buttons with gold plated contact surfaces, manufactured in United States by Otto Engineering.
- Comes Plug and play with OEM connectors.
- Designed for 22 mm standard clip on handle bars.
- Designed and CNC machined in United States from aircraft grade aluminum to be the smallest and lightest on the market.
TWO BUTTON ROAD & TRACK KILL SWITCH FOR HONDA GROM
Part # HGR2
- The switch is a direct plug and play replacement for OEM right handlebar switch for Honda Grom motorcycles (all years)
- Unparalleled weight and space savings. Only 40 grams. Compare to over 100grm for OEM.
Switch functions: Engine Run/Stop, Starter (brake light cabling included)
Completely plug and play.
- Premium, military grade buttons with gold plated contact surfaces, manufactured in United States by Otto Engineering.
- Comes Plug and play with OEM connectors.
- Designed for 22 mm standard clip on handle bars.
- Designed and CNC machined in United States from aircraft grade aluminum to be the smallest and lightest on the market.
Item #: HGR2
Condition:
New
Factory pre-order only for all APX Racing products have 1-to-2-week ETA for production from the manufacturer. Feel free to contact us if you have any questions.
Price: $205.00
Description:
Additional handlebar switch for throttle control ACC 120 (Ducati Panigale V4R).
WARNING: product compatible only with the specified throttle control ACC 100 series, cannot be mounted individually.
WARNING: product compatible only with the specified throttle control ACC 100 series, cannot be mounted individually.
Item #: JP PLD 120R
Condition:
New
Price: $257.00
Description:
Racing left handlebar switch for Ducati Panigale V4/S/R (Titanium).
Jetprime left handlebar switch interchangeable with the original block and applicable to the handlebars of each bike without any modification to be made.
Plug and Play product and specific for each bike.
Jetprime left handlebar switch interchangeable with the original block and applicable to the handlebars of each bike without any modification to be made.
Plug and Play product and specific for each bike.
Item #: JP PLSR 020 T
Condition:
New
Price: $387.40
GSXR 1000 Racing switch
Description:
Racing handlebar switch Race version by JetPrime with 5 buttons for Suzuki GSX-R 1000 (17-23) This Should not be used for the street as it eliminates the turn signal and horn function
For that version choose sku:JP-PLS 011 T
The Jetprime left handlebar switch is interchangeable with the original handlebar switch, Simple plug and play!
For that version choose sku:JP-PLS 011 T
The Jetprime left handlebar switch is interchangeable with the original handlebar switch, Simple plug and play!
Item #: JP PLSR 011 T
Condition:
New
Price: $387.40
BMW S 1000 RR 2019-2023 handlebar switch
Description:
Right handlebar switch for BMW S 1000 RR 2019-23 K67 and K66 models, Mounts to the Standard master cylinder and Brembo RCS, Corta Corsa and Corsa Corta RR. Does NOT fit Brembo racing master cylinders with an offset mounting position such as the PR racing series
Jetprime left handlebar switch interchangeable with the original block and applicable to the handlebars without any modification to be made.
Plug and Play product and specific for each bike.
Jetprime left handlebar switch interchangeable with the original block and applicable to the handlebars without any modification to be made.
Plug and Play product and specific for each bike.
Item #: JP PLD 008
Condition:
New
Limited Supply: Only 1 Left!
Price: $257.00
GSXR 1000 Right Handlebar Switch
Description:
Right handlebar switch for Suzuki GSX-R1000 2017/2021 (Standard master cylinder) (Titanium).
Jetprime right handlebar switch interchangeable with the original block and applicable to the handlebars of each bike without any modification to be made.
Plug and Play product and specific for each bike.
Jetprime right handlebar switch interchangeable with the original block and applicable to the handlebars of each bike without any modification to be made.
Plug and Play product and specific for each bike.
Item #: JP PLD 011 T
Condition:
New
Price: $257.40
Description:
Street version left handlebar switch for Ducati Panigale V4/S/R.
Jetprime left handlebar switch interchangeable with the original block and applicable to the handlebars of each bike without any modification to be made.
Plug and Play product and specific for each bike.
ATTENTION: heated grips function not available.
Jetprime left handlebar switch interchangeable with the original block and applicable to the handlebars of each bike without any modification to be made.
Plug and Play product and specific for each bike.
ATTENTION: heated grips function not available.
Item #: JP PLS 020
Condition:
New
Price: $387.40
GSXR 1000 Street switch
Description:
Racing handlebar switch street version by JetPrime with 7 button for Suzuki GSX-R 1000 (17-23)
The Jetprime left handlebar switch is interchangeable with the original handlebar switch, Simple plug and play!
The Jetprime left handlebar switch is interchangeable with the original handlebar switch, Simple plug and play!
Item #: JP PLS 011 T
Condition:
New
Price: $387.40
Jet Prime Superbike left handlebar switch for Yamaha YZF-R1/M 2020+
Description:
Street version left handlebar switch for Yamaha YZF-R1/M.
Jetprime left handlebar switch interchangeable with the original block and applicable to the handlebars of each bike without any modification to be made.
Plug and Play product and specific for each bike
Jetprime left handlebar switch interchangeable with the original block and applicable to the handlebars of each bike without any modification to be made.
Plug and Play product and specific for each bike
Item #: JP PLS 033
Condition:
New
Limited Supply: Only 1 Left!
Price: $387.40
Jet Prime Superbike left handlebar switch for Yamaha YZF-R1/M 2020+
Description:
Superbike left handlebar switch for Yamaha YZF-R1/M.
Jetprime left handlebar switch interchangeable with the original block and applicable to the handlebars of each bike without any modification to be made.
Plug and Play product and specific for each bike.
Jetprime left handlebar switch interchangeable with the original block and applicable to the handlebars of each bike without any modification to be made.
Plug and Play product and specific for each bike.
Item #: JP PLSR 033
Condition:
New
Limited Supply: Only 1 Left!
Price: $387.40
BMW S1000RR Jet prime throttle switches
Description:
Additional handlebar switch for throttle control ACC 108 (2015-2019 S1000RR) and throttle control ACC 130 (2020-23 S1000RR and M1000RR)
WARNING: product compatible only with the specified throttle control ACC 100 series, cannot be mounted individually. **Throttle Not Included**
WARNING: product compatible only with the specified throttle control ACC 100 series, cannot be mounted individually. **Throttle Not Included**
Item #: JP PLD 108
Condition:
New
Limited Supply: Only 2 Left!
When not in stock these can take 2 to 4 weeks for resupply as they come from Italy and we place orders as inventory dictates.
Price: $257.00
Additional handlebar switch for throttle control ACC 133/143 (Yamaha)
Description:
WARNING: product compatible only with the specified throttle control ACC 100 series, cannot be mounted individually.
Fits Yamaha R1 2020 through 2023
OEM Wire harness use with throttle part# JP ACC 143
For YEC Race harness use part #JP Acc 133
These buttons replace all functions of right side
Fits Yamaha R1 2020 through 2023
OEM Wire harness use with throttle part# JP ACC 143
For YEC Race harness use part #JP Acc 133
These buttons replace all functions of right side
Item #: JP PLD 133
Condition:
New
Limited Supply: Only 1 Left!
Price: $315.68
Ducati V4S Right Hand Switch/ Button Pod
Description:
Right handlebar switch for Ducati Panigale V4/S (Standard master cylinder)(Ducati).
WARNING: product compatible only with the standard master cyclinder or
Fits
Ducati
SUPERBIKE PANIGALE V4/S (1100 cc) - 2018/2020
SUPERBIKE PANIGALE V4/S (1100 cc) - 2021/2023
WARNING: product compatible only with the standard master cyclinder or
Fits
Ducati
SUPERBIKE PANIGALE V4/S (1100 cc) - 2018/2020
SUPERBIKE PANIGALE V4/S (1100 cc) - 2021/2023
Item #: JP PLD 020
Condition:
New
When not in stock these can take 2 to 4 weeks for resupply as they come from Italy and we place orders as inventory dictates.
Price: $257.00
Ducati V4S Right Hand Switch/ Button Pod
Description:
Street version left handlebar switch for Ducati Panigale V4/S/R.
Jetprime left handlebar switch interchangeable with the original block and applicable to the handlebars of each bike without any modification to be made.
Plug and Play product and specific for each bike.
ATTENTION: heated grips function not available.
SUPERBIKE PANIGALE V4 R (998 cc) - 2019/2020
SUPERBIKE PANIGALE V4 R (998 cc) - 2023
SUPERBIKE PANIGALE V4/S (1100 cc) - 2018/2020
SUPERBIKE PANIGALE V4/S (1100 cc) - 2021/2023
Jetprime left handlebar switch interchangeable with the original block and applicable to the handlebars of each bike without any modification to be made.
Plug and Play product and specific for each bike.
ATTENTION: heated grips function not available.
SUPERBIKE PANIGALE V4 R (998 cc) - 2019/2020
SUPERBIKE PANIGALE V4 R (998 cc) - 2023
SUPERBIKE PANIGALE V4/S (1100 cc) - 2018/2020
SUPERBIKE PANIGALE V4/S (1100 cc) - 2021/2023
Item #: JP PLS 020
Condition:
New
When not in stock these can take 2 to 4 weeks for resupply as they come from Italy and we place orders as inventory dictates.
Price: $387.40
Description:
The Speedcell Key Delete Master Arm is designed for racers and track day enthusiast’s; our Key Delete replaces your OEM key assembly and fits into the ignition provision on OEM triple clamps
Elimination of battery over discharge due to leaving the bike in the “Run” position
Elimination of battery over discharge due to leaving the bike in the “Run” position
Master Arm circuit isolation allows for the immediate disconnect from power in the event of an emergency
All Speedcell Key Delete Master Arm’s come standard with an ALL weather Military grade toggle switch - MIL-DTL-3950 rating
Elimination of battery over discharge due to leaving the bike in the “Run” position
Elimination of battery over discharge due to leaving the bike in the “Run” position
Master Arm circuit isolation allows for the immediate disconnect from power in the event of an emergency
All Speedcell Key Delete Master Arm’s come standard with an ALL weather Military grade toggle switch - MIL-DTL-3950 rating
Item #: R3
Condition:
New
Limited Supply: Only 1 Left!
If no inventory is listed above, please feel free to contact us for ETA from manufacturer.
Price: $89.00
Sale: $75.65
Save: 15%
Save: $13.35
Items 61-90 of 90
- Prev
- Page 2 of 2
Popular Brands:
More About Button Pods On/Off switches and Keyless delete kits
We carry a variety of key delete kits , On off switches and Button pods which are common parts to change on any track bike. Not using a key to start your bike means you don't have to remember to bring it! Button pods are built to withstand crashes and some throttles incorporate the Run/Kill switch into the throttle so they are needed when switching out to a quick turn throttle kit