{"title":"BMW M1000RR Bodywork","description":"","products":[{"product_id":"alpha-racing-seat-bench-plate-10-mm-carbon-bmw-s1000rr-2019-and-bmw-m1000rr-2021-alpha-4663b001a11","title":"Alpha Racing Seat bench plate 10 mm carbon BMW S1000RR 2019- and BMW M1000RR 2021-","description":"\u003cp\u003eAlpha Racing Seat bench plate 10 mm carbon BMW S1000RR 2019- and BMW M1000RR 2021- 4663B001A11\u003c\/p\u003e\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\u003cp\u003e Seat foam unit with integrated seat wedge, suitable for race tail fibreglass\/carbon.\u003cbr\u003e\u003c\/p\u003e\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\u003cp\u003e- fibreglass base plate\u003cbr\u003e\u003c\/p\u003e\u003cp\u003e- 10 mm foam rubber padding\u003cbr\u003e\u003c\/p\u003e\u003cp\u003e- integrated seat wedge, shortens the seat by approx. 75 mm compared to the 10 mm standard seat\u003cbr\u003e\u003c\/p\u003e\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\u003cp\u003ePlease note:\u003cbr\u003e\u003c\/p\u003e\u003cp\u003eProtect foam rubber padding from direct sunlight and chemicals.\u003cbr\u003e\u003c\/p\u003e\u003cp\u003ePicture shows seat with carbon base plate (only available on request).\u003cbr\u003e\u003c\/p\u003e\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\u003cp\u003eWeight: 0.435 kg\u003c\/p\u003e\u003ch4\u003e\n\n                    Delivery Scope\n\n                \u003c\/h4\u003e\n\n                \u003cp\u003e\n\n                    - seat foam unit, short\n\n                \u003c\/p\u003e\n\n            \n\n            \u003cbr\u003e","brand":"Alpha Racing Performance Parts","offers":[{"title":"Default Title","offer_id":46122209149157,"sku":"4663B001A11","price":302.22,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0682\/5646\/5125\/files\/F220966217.jpg?v=1726637164"},{"product_id":"alpha-racing-front-fender-carbon-bmw-s1000rr-2019-m1000rr-2021","title":"Alpha Racing Front Fender Carbon BMW S1000RR 2019+ M1000RR 2021+","description":"\u003cp\u003eAlpha Racing Front fender carbon BMW S1000RR 2019- \u0026amp; BMW M1000R 2021- 4663B001B08\u003c\/p\u003e\u003cp\u003eFront fender carbon, for BMW S 1000 RR 2019- (K67) and M 1000 RR 2021- (K66), carbon-prepreg-material, autoclave\u003c\/p\u003e\u003cul id=\"productDetailsList\" class=\"floatingBox back\"\u003e\n\u003ch2\u003eAdditional articles\u003c\/h2\u003e\n\u003cdiv class=\"tab_content_span\"\u003e\u003cli\u003eThis part is a direct replacement for the original component and contributes mainly to weight saving on the motorcycle (up to 70% less), a higher stiffness of the parts and a unique look.\u003cbr\u003e\n\n\u003cbr\u003e\n\nThis carbon fibre part was made according to the latest protocols and industry standards and can be considered to encompass all aspects of current 'best of industry' practice. The part is made completely out of pre-preg carbon fibre materials using an autoclave. On this part we use a clear plastic coating that not only improves the appearance, but also protects the carbon fibre from scratching and has a unique UV resistance.\u003cbr\u003e\n\n\u003cbr\u003e\n\nweight: 0,240 kg\u003c\/li\u003e\u003c\/div\u003e\n\u003ch2\u003eDelivery\u003c\/h2\u003e\n\u003cdiv class=\"tab_content_span\"\u003e\u003cli\u003e- front fender\u003c\/li\u003e\u003c\/div\u003e\n\u003ch2\u003eModified vehicle parts\u003c\/h2\u003e\n\u003cdiv class=\"tab_content_span\"\u003e\u003cli\u003eCarbon front fender replaces the OEM fender by using the original fixing points.\u003c\/li\u003e\u003c\/div\u003e\n\n\u003c\/ul\u003e","brand":"Alpha Racing Performance Parts","offers":[{"title":"Default Title","offer_id":46122210197733,"sku":"4663B001B08","price":276.92,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0682\/5646\/5125\/files\/F220947958.jpg?v=1726582916"},{"product_id":"alpha-racing-rear-fender-carbon-bmw-s1000rr-2019-and-m1000rr-2021","title":"Alpha Racing Rear Fender Carbon BMW S1000RR 2019- And M1000RR 2021-","description":"\u003cp\u003eAlpha Racing Rear Fender Carbon BMW S1000RR 2019- And M1000RR 2021- 4663B001B60\u003c\/p\u003e\u003cp\u003eRear fender carbon, for BMW S 1000 RR 2019- (K67) and M 1000 RR 2021- (K66), for OEM swingarm, incl. chain guard, carbon-prepreg-material, autoclave\u003c\/p\u003e\u003cul id=\"productDetailsList\" class=\"floatingBox back\"\u003e\n\u003ch2\u003eAdditional articles\u003c\/h2\u003e\n\u003cdiv class=\"tab_content_span\"\u003e\u003cli\u003eThis part is a direct replacement for the original component and contributes mainly to weight saving on the motorcycle (up to 70% less), a higher stiffness of the parts and a unique look.\u003cbr\u003e\n\n\u003cbr\u003e\n\nThis carbon fibre part was made according to the latest protocols and industry standards and can be considered to encompass all aspects of current 'best of industry' practice. The part is made completely out of pre-preg carbon fibre materials using an autoclave. On this part we use a clear plastic coating that not only improves the appearance, but also protects the carbon fibre from scratching and has a unique UV resistance.\u003cbr\u003e\n\n\u003cbr\u003e\n\nweight: 0,500 kg\u003c\/li\u003e\u003c\/div\u003e\n\u003ch2\u003eDelivery\u003c\/h2\u003e\n\u003cdiv class=\"tab_content_span\"\u003e\u003cli\u003e- rear fender incl. chain guard\u003c\/li\u003e\u003c\/div\u003e\n\n\u003c\/ul\u003e","brand":"Alpha Racing Performance Parts","offers":[{"title":"Default Title","offer_id":46122210590949,"sku":"4663B001B60","price":352.8,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0682\/5646\/5125\/files\/F220947974.jpg?v=1726582935"},{"product_id":"alpha-racing-fairing-kit-6-piece-fibreglass-bmw-m1000rr-2021","title":"Alpha Racing Fairing kit 6-piece fibreglass BMW M1000RR 2021","description":"\u003cp\u003eAlpha Racing Fairing kit 6-piece fibreglass BMW M1000RR 2021 4663B003A00\u003c\/p\u003e\u003cp\u003eRacing fairing kit fibreglass 6-piece, for BMW M 1000 RR 2021- (K66), fibreglass-prepreg-material, autoclave\u003c\/p\u003e\u003cul id=\"productDetailsList\" class=\"floatingBox back\"\u003e\n\u003ch2\u003eAdditional articles\u003c\/h2\u003e\n\u003cdiv class=\"tab_content_span\"\u003e\u003cli\u003eThis race fairing kit is recommended to be used with other fibreglass racing parts (see tab \"Accessories\") to ensure a perfect fit and contributes in combination mainly to weight saving on the motorcycle, a higher stiffness of the parts and a unique look. Also, the aerodynamics are optimized compared to the stock fairings.\u003cbr\u003e\n\nOur fibreglass parts convince by a outstanding price without neglecting a perfect fit and great quality of the fairing.\u003cbr\u003e\n\n\u003cbr\u003e\n\nThis fibreglass part was made according to the latest protocols and industry standards and can be considered to encompass all aspects of current 'best of industry' practice. The part is made completely out of prepreg fibreglass materials using an autoclave.\u003cbr\u003e\n\n\u003cbr\u003e\n\nPlease note:\u003cbr\u003e\n\n- Fits only with racing exhaust system.\u003cbr\u003e\n\n- Fits to the OEM and racing dashboard \u0026amp; fairing carrier.\u003cbr\u003e\n\n- For mountig holder kit is needed (article code 46DA01100).\u003cbr\u003e\n\n- OEM airbox inlet tube can be used (alternativ available in carbon, article code 4663B001B50).\u003cbr\u003e\n\n\u003cbr\u003e\n\nweight: 2,740 kg\u003c\/li\u003e\u003c\/div\u003e\n\u003ch2\u003eDelivery\u003c\/h2\u003e\n\u003cdiv class=\"tab_content_span\"\u003e\u003cli\u003e- upper fairing\u003cbr\u003e\n\n- lower fairing\u003cbr\u003e\n\n- right fairing\u003cbr\u003e\n\n- left fairing\u003cbr\u003e\n\n- right winglet (carbon)\u003cbr\u003e\n\n- left winglet (carbon)\u003cbr\u003e\n\n- quick fasteners, pre-fitted\u003cbr\u003e\n\n- 2 plugs for bottom fairing part\u003c\/li\u003e\u003c\/div\u003e\n\u003ch2\u003eModified vehicle parts\u003c\/h2\u003e\n\u003cdiv class=\"tab_content_span\"\u003e\u003cli\u003eIn case the alpha Racing Kit radiator is used, the fairing needs to be cutted a little bit.\u003c\/li\u003e\u003c\/div\u003e\n\n\u003c\/ul\u003e","brand":"Alpha Racing Performance Parts","offers":[{"title":"Default Title","offer_id":46122210820325,"sku":"4663B003A00","price":2465.84,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0682\/5646\/5125\/files\/F220947270.jpg?v=1726582992"},{"product_id":"alpha-racing-fairing-kit-6-piece-carbon-bmw-m1000r-2021","title":"Alpha Racing Fairing kit 6-piece carbon BMW M1000R 2021","description":"\u003cp\u003eAlpha Racing Fairing kit 6-piece carbon BMW M1000R 2021 4663B003B00\u003c\/p\u003e\n\u003cp\u003eRacing fairing kit carbon 6-piece, for BMW M 1000 RR 2021- (K66), carbon-prepreg-material, autoclave\u003c\/p\u003e\n\u003ch2\u003eAdditional articles\u003c\/h2\u003e\n\u003cdiv class=\"tab_content_span\"\u003eThis race fairing kit is recommended to be used with other carbon racing parts (see tab \"Accessories\") to ensure a perfect fit and contributes in combination mainly to weight saving on the motorcycle (up to 70% less), a higher stiffness of the parts and a unique look. Also, the aerodynamics are optimized compared to the stock fairings.\u003cbr\u003e\u003cbr\u003eThese carbon fibre parts were made according to the latest protocols and industry standards and can be considered to encompass all aspects of current 'best of industry' practice. The part is made completely out of pre-preg carbon fibre materials using an autoclave. On these parts we use a clear plastic coating that not only improves the appearance, but also protects the carbon fibre from scratching and has a unique UV resistance.\u003cbr\u003e\u003cbr\u003ePlease note:\u003cbr\u003e- Fits only with racing exhaust system.\u003cbr\u003e- Fits to the OEM and racing dashboard \u0026amp; fairing carrier.\u003cbr\u003e- For mountig holder kit is needed (article code 46DA01100).\u003cbr\u003e- OEM airbox inlet tube can be used (alternativ available in carbon, article code 4663B001B50).\u003cbr\u003e\u003cbr\u003eweight: 2,445 kg\u003c\/div\u003e\n\u003ch2\u003eDelivery\u003c\/h2\u003e\n\u003cdiv class=\"tab_content_span\"\u003e- upper fairing\u003cbr\u003e- lower fairing\u003cbr\u003e- right fairing\u003cbr\u003e- left fairing\u003cbr\u003e- right winglet\u003cbr\u003e- left winglet\u003cbr\u003e- quick fasteners, pre-fitted\u003cbr\u003e- 2 plugs for bottom fairing part\u003c\/div\u003e\n\u003ch2\u003eModified vehicle parts\u003c\/h2\u003e\n\u003cdiv class=\"tab_content_span\"\u003eIn case the alpha Racing Kit radiator is used, the fairing needs to be cutted a little bit.\u003c\/div\u003e\n\u003cul id=\"productDetailsList\" class=\"floatingBox back\"\u003e\u003c\/ul\u003e","brand":"Alpha Racing Performance Parts","offers":[{"title":"Default Title","offer_id":46122211115237,"sku":"4663B003B00","price":2718.76,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0682\/5646\/5125\/files\/F220947941.jpg?v=1726582907"},{"product_id":"alpha-racing-winglet-left-side-carbon","title":"Alpha Racing Winglet left side carbon","description":"\u003cp\u003eAlpha Racing Winglet left side carbon 4663B003B11\u003c\/p\u003e\u003cp\u003eWinglet left side carbon, BMW M 1000 RR 2021- (K66), spare part for left bodywork panel\u003c\/p\u003e\u003cul id=\"productDetailsList\" class=\"floatingBox back\"\u003e\n\u003ch2\u003eAdditional articles\u003c\/h2\u003e\n\u003cdiv class=\"tab_content_span\"\u003e\u003cli\u003eThe M carbon winglets generate a downforce of 16.3 kg. Use therefore only in connection with reinforced racing bodywork parts (see Accessories tab).\u003cbr\u003e\n\n\u003cbr\u003e\n\nThe figure shows the side panel with the winglet mounted, the side panel is not included in the scope of delivery.\u003cbr\u003e\n\n\u003cbr\u003e\n\nWeight: 0,170 kg\u003c\/li\u003e\u003c\/div\u003e\n\u003ch2\u003eDelivery\u003c\/h2\u003e\n\u003cdiv class=\"tab_content_span\"\u003e\u003cli\u003e- Winglet, left side\u003c\/li\u003e\u003c\/div\u003e\n\n\u003c\/ul\u003e","brand":"Alpha Racing Performance Parts","offers":[{"title":"Default Title","offer_id":46122211148005,"sku":"4663B003B11","price":588.01,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0682\/5646\/5125\/files\/F220961068.jpg?v=1726634639"},{"product_id":"alpha-racing-fairing-set-grp-bmw-m1000rr-2023","title":"Alpha Racing Fairing set GRP BMW M1000RR 2023+","description":"\u003cp\u003eFairing set GRP, 6 pieces, BMW M1000RR 2023+ (K66), GRP prepreg material\u003c\/p\u003e\u003cp\u003e- Upper fairing\u003c\/p\u003e\u003cp\u003e- Lower fairing\u003c\/p\u003e\u003cp\u003e- Right side fairing\u003c\/p\u003e\u003cp\u003e- Left side fairing\u003c\/p\u003e\u003cp\u003e- Right winglet, carbon\u003c\/p\u003e\u003cp\u003e- Left winglet, carbon\u003c\/p\u003e\u003cp\u003e- 20x quick-release fastener, pre-assembled\u003c\/p\u003e\u003cp\u003e- 2x sealing plugs for lower for rain release\u003c\/p\u003e\u003cp\u003eModified vehicle parts\u003c\/p\u003e\u003cp\u003eWhen using the large kit Radiator cooler, the fairing may have to be adjusted a little.\u003c\/p\u003e\u003cp\u003eRacing fairing set made of high-quality GRP prepreg material, made by Ilmberger Carbon. When designing and manufacturing the components, the focus is on weight savings, greater rigidity and a perfect design. In addition, the aerodynamics are optimized compared to the series fairing. The GRP parts were made entirely of prepreg material in an autoclave according to the latest guidelines. We recommend using the fairing parts only in combination with other parts from the GRP racing series (see Accessories tab). Racing fairing parts cannot be installed together with OEM fairing components, there is no form fit. Please note: - Only use in conjunction with the racing exhaust system. - Fits only in connection with Racing instrument \u0026amp; fairing holder. - An additional bracket set is required for assembly \u003clabel\u003eSKU:\u003c\/label\u003e\u003cspan class=\"wsm-prod-sku\"\u003e4663B022B00\u003c\/span\u003e (see Accessories tab). - The OEM air intake duct can be used, alternatively we offer air ducts in carbon or GRP design (see accessories tab). Please Note: Tail unit and Airbox Cover to be ordered Separately as this doe not come with the tail unit seat or brackets Windshield Must also be ordered Separately\u003c\/p\u003e","brand":"Alpha Racing Performance Parts","offers":[{"title":"Default Title","offer_id":46122211508453,"sku":"4663B009A00","price":3020.98,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0682\/5646\/5125\/files\/F220969987.png?v=1726640807"},{"product_id":"alpha-racing-winglet-left-side-carbon-23-m1000rr","title":"Alpha Racing Winglet left side carbon 23+ M1000RR","description":"\u003cp\u003eAlpha Racing Winglet left side carbon 4663B009B11\u003c\/p\u003e\u003cp\u003eWinglet left side carbon, BMW M 1000 RR 2023+, spare part for Alpha race bodywork Only\u003c\/p\u003e\u003ch2\u003eThe completely newly developed M winglets now produce up to 22.6 kg of downforce depending on speed. Use therefore only in combination with matching Racing bodywork parts (see Accessories tab).\u003cbr\u003e\u003cbr\u003ePicture shows bodywork parts with mounted winglet, bodywork parts not included.\u003c\/h2\u003e","brand":"Alpha Racing Performance Parts","offers":[{"title":"Default Title","offer_id":46122211573989,"sku":"4663B009B11","price":821.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0682\/5646\/5125\/files\/F220972368.png?v=1726641835"},{"product_id":"alpha-racing-winglet-right-side-carbon-23-m1000rr","title":"Alpha Racing Winglet Right side carbon 23+ M1000RR","description":"\u003cp\u003eAlpha Racing Winglet Right side carbon 4663B009B12\u003c\/p\u003e\u003cp\u003eWinglet left side carbon, BMW M 1000 RR 2023+, spare part for Alpha race bodywork Only\u003c\/p\u003e\u003cp\u003eDOES NOT FIT OEM BODYWORK\u003c\/p\u003e\u003ch2\u003eThe completely newly developed M winglets now produce up to 22.6 kg of downforce depending on speed. Use therefore only in combination with matching Racing bodywork parts (see Accessories tab).\u003cbr\u003e\u003cbr\u003ePicture shows bodywork parts with mounted winglet, bodywork parts not included.\u003c\/h2\u003e","brand":"Alpha Racing Performance Parts","offers":[{"title":"Default Title","offer_id":46122211606757,"sku":"4663B009B12","price":821.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0682\/5646\/5125\/files\/F220972374.png?v=1726641840"},{"product_id":"alpha-racing-race-tail-unit-bmw-m1000rr-2023","title":"Alpha Racing Race Tail Unit BMW M1000RR 2023","description":"\u003cp\u003eGRP hump, BMW S 1000 RR 2023- (K67) and M 1000 RR 2023- (K66), suitable for OEM and racing rear frames, GRP prepreg material\u003c\/p\u003e\u003cp\u003eRacing rear section made of high-quality GRP prepreg material, made by Ilmberger.\u003c\/p\u003e\n\n\u003cp\u003e\u003cbr\u003eThe design and manufacture of the racing hump focus on weight savings and high rigidity. The component was made entirely of GRP prepreg material in an autoclave according to the latest guidelines.\u003cbr\u003e\u003cbr\u003eWe recommend using the fairing parts only in combination with other parts from the GRP racing series, see Accessories . Racing fairing parts cannot be installed together with OEM fairing components, there is no form fit. \u003cbr\u003e\u003cbr\u003ePlease note:\u003cbr\u003e- The seat plate must be ordered separately Accessories.\u003cbr\u003e- By using different seat plates, the seat height and seat position can be adjusted to the needs of the driver.\u003cbr\u003e- For mounting on the OEM rear frame, the hump holder set is required see Accessories.\u003c\/p\u003e","brand":"Alpha Racing Performance Parts","offers":[{"title":"Default Title","offer_id":46122253189349,"sku":"4663B009A05","price":466.61,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0682\/5646\/5125\/files\/F220970168.png?v=1726640949"},{"product_id":"alpha-racing-front-fender-grp-bmw-m1000rr-2023-k66-grp-prepreg-material","title":"Alpha Racing Front fender GRP BMW M1000RR 2023- (K66), GRP prepreg material","description":"\u003cp\u003eRacing fenders made of high-quality GRP prepreg material with integrated air ducts for better cooling of the front brake calipers, made by Ilmberger Carbon.\u003cbr\u003eWhen designing and manufacturing the front fender, the focus is on weight savings and high rigidity. The component was made entirely of GRP prepreg material in an autoclave according to the latest guidelines.\u003c\/p\u003e\n\n\u003cp\u003e \u003c\/p\u003e\n\n\u003cp\u003eFor best fit you will want to also purchase Bracket set for front fenders, BMW M 1000 RR 2023- (K66), secure attachment of the fender to the fork base 4663B011A00\u003c\/p\u003e","brand":"Alpha Racing Performance Parts","offers":[{"title":"Default Title","offer_id":46122253222117,"sku":"4663B009A06","price":340.16,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0682\/5646\/5125\/files\/F220970653.png?v=1726641037"},{"product_id":"alpha-racing-fiberglass-air-duct-m1000rr-2023","title":"Alpha Racing Fiberglass Air Duct M1000RR 2023+","description":"\u003cp\u003eAir duct GRP, BMW M1000RR 2023+ (K66), GRP prepreg material\u003c\/p\u003e\u003cp\u003eDoes not fit 2022 M1000RR or S1000RR \u003c\/p\u003e\u003cp\u003eFits with upper fairing bracket Sku: 4663B025A00\u003c\/p\u003e\u003cp\u003eAirbox intake air duct made of high-quality GRP prepreg material, made by Ilmberger Carbon.\u003cbr\u003eWhen designing and manufacturing the individual components, the focus is on weight savings and high rigidity. The component was made entirely of GRP prepreg material in an autoclave according to the latest guidelines.\u003cbr\u003e\u003cbr\u003eWe recommend using the fairing parts only in combination with other parts from the GRP racing series. Racing fairing parts cannot be installed together with OEM fairing components, there is no form fit.\u003c\/p\u003e","brand":"Alpha Racing Performance Parts","offers":[{"title":"Default Title","offer_id":46122253287653,"sku":"4663B009A07","price":137.84,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0682\/5646\/5125\/files\/F220970177.png?v=1726640954"},{"product_id":"alpha-racing-fairing-6-piece-carbon-set-bmw-m1000-rr-2023-2024-k66-carbon-prepreg-material","title":"Alpha Racing Fairing 6-piece carbon set BMW M1000 RR 2023--2024 (K66), carbon prepreg material","description":"\u003cp\u003eDelivery Scope\u003c\/p\u003e\u003cp\u003e- Fairing upper part\u003c\/p\u003e\u003cp\u003e- Fairing lower part\u003c\/p\u003e\u003cp\u003e- Fairing side part right\u003c\/p\u003e\u003cp\u003e- Fairing side part left\u003c\/p\u003e\u003cp\u003e- Winglet right, Carbon\u003c\/p\u003e\u003cp\u003e- Winglet left, Carbon\u003c\/p\u003e\u003cp\u003e- 20x quick release fastener, pre-assembled\u003c\/p\u003e\u003cp\u003e- 2x closing plugs for lower part\u003c\/p\u003e\u003cp\u003eThis does not include the brackets or Rear tail section or airbox cover. It is only the front fairing (photo is for reference) \u003c\/p\u003e\u003cp\u003eNote\u003c\/p\u003e\u003cp\u003eWhen using the large kit radiator, the fairing may need to be adjusted slightly.\u003c\/p\u003e\u003cp\u003eRacing bodywork kit made of high quality carbon prepreg material, made by Ilmberger Carbon.\u003c\/p\u003e\n\n\u003cp\u003eIn the design and manufacture of this component, the focus is on weight savings (usually savings of about 70% compared to the original component), higher rigidity and a perfect design.\u003c\/p\u003e\n\n\u003cp\u003eThis carbon kit was manufactured according to the latest guidelines in an autoclave completely from prepreg material and in the next step, to protect against environmental influences, covered with a clear plastic coating. This plastic coating surpasses the usual clear coating in terms of protective effect, scratch resistance and durability. But the coating does not only score technically, it also clearly underlines the three-dimensional effect of the carbon structure once again.\u003c\/p\u003e\n\n\u003cp\u003eWe recommend using the bodywork parts only in combination with other parts from the carbon racing series . Racing fairing parts cannot be mounted together with OEM fairing components, there is no positive fit.\u003c\/p\u003e\n\n\u003cp\u003ePlease note:\u003c\/p\u003e\n\n\u003cp\u003e- Use only in combination with Racing exhaust system.\u003c\/p\u003e\n\n\u003cp\u003e- Fits with racing dashboard \u0026amp; fairing carrier, mounting kit for OEM front carrier available separately.\u003c\/p\u003e\n\n\u003cp\u003e- An additional bracket kit is required for installation (see Accessories).\u003c\/p\u003e\n\n\u003cp\u003e- OEM air intake duct can be used, alternatively we offer carbon or fiberglass air intakes.\u003c\/p\u003e\n\n\u003cp\u003eWeight: 2.750 kg\u003c\/p\u003e","brand":"Alpha Racing Performance Parts","offers":[{"title":"Default Title","offer_id":46122253385957,"sku":"4663B009B00","price":4917.79,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0682\/5646\/5125\/files\/4663b009b00_10_34500_1920x1920_f6384b40-1e75-46f0-8bc8-98537935c0fc.jpg?v=1757100200"},{"product_id":"alpha-racing-carbon-fiber-tail-unit-s1000rr-m1000rr-23","title":"Alpha Racing Carbon Fiber Tail Unit S1000RR M1000RR 23+","description":"\u003cp\u003eRace tail carbon, BMW S 1000 RR 2023- (K67) and M 1000 RR 2023- (K66), fits to OEM and racing subframe, carbon-prepreg-material \u003cstrong\u003eDOES NOT FIT WITH OEM AIRBOX OR SEAT\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eRacing tail section made of high-quality carbon prepreg material, by Ilmberger Carbon.\u003cbr\u003e\u003cbr\u003eIn the design and manufacture of this component, the focus is on weight savings (usually savings of about 70% compared to the original component), higher rigidity and a perfect design.\u003cbr\u003e\u003cbr\u003eThis carbon part was manufactured according to the latest guidelines in an autoclave completely from prepreg material and in the next step, to protect against environmental influences, covered with a clear plastic coating. This plastic coating surpasses the usual clear coating in terms of protective effect, scratch resistance and durability. But the coating does not only score technically, it also clearly underlines the three-dimensional effect of the carbon structure once again.\u003cbr\u003e\u003cbr\u003eWe recommend using the bodywork parts only in combination with other parts from the carbon racing series (see Accessories tab). Racing fairing parts cannot be mounted together with OEM fairing components, there is no positive fit.\u003cbr\u003e\u003cbr\u003ePlease note:\u003cbr\u003e- The seat plate must be ordered separately .\u003c\/p\u003e\n\u003cp\u003eMounting brackets needs to be ordered seperately \u003cspan\u003e46DA01101\u003c\/span\u003e\u003cbr\u003e- By using different seat plates, the seat height and the seat position can be adjusted to the rider's needs.\u003cbr\u003e- For mounting on the OEM rear frame an additional bracket set is required\u003c\/p\u003e","brand":"Alpha Racing Performance Parts","offers":[{"title":"Default Title","offer_id":46122254762213,"sku":"4663B009B05","price":757.45,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0682\/5646\/5125\/files\/F220972754.png?v=1726641990"},{"product_id":"alpha-racing-carbon-front-fender-racing-version-m1000rr","title":"Alpha Racing Carbon Front Fender Racing Version M1000RR","description":"\u003cp\u003eCarbon fiber Front fender to fit BMW M1000RR 2023+ (K66) Race Version\u003c\/p\u003e\u003cdiv\u003e\u003cstrong\u003eRacing fenders made of high-quality carbon prepreg material with integrated air ducts for better cooling of the front brake calipers, made by Ilmberger Carbon.\u003cbr\u003e\u003cbr\u003eWhen designing and manufacturing this component, the focus is on weight savings (usually savings of around 70% compared to the original component), higher rigidity and a perfect design.\u003cbr\u003e\u003cbr\u003eThis carbon part was made entirely of prepreg material in an autoclave according to the latest guidelines and then covered with a clear plastic coating to protect against environmental influences. This plastic coating enormously surpasses the usual clear coat in terms of protection, scratch resistance and durability. But the coating not only scores points technically, it also clearly underlines the three-dimensional effect of the carbon structure.\u003cbr\u003e\u003cbr\u003eWe recommend using the fairing parts only in combination with other parts from the carbon racing series (see Accessories tab). Racing fairing parts cannot be installed together with OEM fairing components, there is no form fit.\u003cbr\u003e\u003cbr\u003e- light clip-on holder for the OEM fork base\u003cbr\u003e- fixation of the mudguard and the air ducts\u003cbr\u003e- for racing and OEM mudguards\u003c\/strong\u003e\u003c\/div\u003e\n\n\u003cdiv\u003e\u003cstrong\u003e- racing part, not for street use\u003cbr\u003e- improved cooling capacity for the brake\u003cbr\u003e- better protection of the lower fork tubes\u003cbr\u003e- Sealing of all surfaces (inside and outside) with a unique coating to protect against environmental influences of all kinds\u003cbr\u003e- made of prepreg material specially produced for Ilmberger\u003cbr\u003e- Attachment using the original attachment points\u003c\/strong\u003e\u003c\/div\u003e\n\n\u003cp\u003e \u003c\/p\u003e","brand":"Alpha Racing Performance Parts","offers":[{"title":"Default Title","offer_id":46122254926053,"sku":"4663B009B06","price":542.48,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0682\/5646\/5125\/files\/F220970330.png?v=1726640992"},{"product_id":"alpha-racing-aero-wheel-cover-set-s1000rr-m1000rr-s1000r","title":"Alpha racing Aero Wheel Cover Set S1000RR M1000RR S1000R","description":"- 2x carbon wheel cover (left \u0026amp; right side)\u003cbr\u003e- 2x holder for mounting on the fork foot\u003cbr\u003e- 2x ball head (only for M 1000 RR 2023-)\u003cbr\u003e- 2x snap lock, rubber (only for M 1000 RR 2023-)\u003cp\u003eThe aero wheel covers were created in cooperation with the experts from BMW Motorsport. The carbon covers reduce the turbulence on the front wheel and ensure an improved flow of air to the cooler. The covers unfold their full potential on long straights and at speeds of over 200 km\/h. Made by Ilmberger Carbon.\u003cbr\u003e\u003cbr\u003eFor the carbon, Ilmberger Carbon only uses prepreg fabric specially produced for this purpose, which is also used in a similar form in Formula 1 and aerospace. The material, which is painstakingly laminated by hand and hardened in several stages in an autoclave, impresses not only with its unique appearance but also with its technical properties. With the same volume, it has three times the specific stiffness of steel and at the same time, due to its particularly low density, only a fraction of its weight. These properties are particularly pronounced due to the high fiber volume content.\u003cbr\u003eIn order to optimally protect the material from environmental influences of all kinds, Ilmberger Carbon, as the only carbon manufacturer in the world, uses a specially developed plastic coating. In combination with clear lacquer, this ensures a special depth effect.\u003cbr\u003e\u003cbr\u003e- Cover made of carbon prepreg material\u003cbr\u003e- Brackets CNC-milled and black anodized\u003cbr\u003e- Mounting on the fork base\u003cbr\u003e- Quick and easy mounting\u003cbr\u003e- Optimally protected against UV light\u003c\/p\u003e","brand":"Alpha Racing Performance Parts","offers":[{"title":"Default Title","offer_id":46122255057125,"sku":"4663B009B30","price":1642.64,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0682\/5646\/5125\/files\/F220970325.png?v=1726640987"},{"product_id":"alpha-racing-fender-bracket-set-for-m1000rr-racing-fender","title":"Alpha Racing Fender Bracket set for M1000RR Racing Fender","description":"\u003cp\u003eBracket set for front fenders, BMW M 1000 RR 2023- (K66), secure attachment of the fender to the fork base\u003c\/p\u003e\u003cp\u003e- 2x holder for fork foot (left \u0026amp; right side)\u003c\/p\u003e\u003cp\u003e- 2x snap lock, rubber\u003c\/p\u003e\u003cp\u003e- 2x cable ties\u003c\/p\u003e\u003cp\u003eWith the clip-on bracket set, the racing fender is easily and securely fixed to the fork foot and also ensures the correct positioning of the integrated air ducts of the front wheel brake. The holders can also be used together with the OEM fender, they are required if the wheel covers and the associated holder construction are omitted.\u003cbr\u003e\u003cbr\u003e- light clip-on holder for the OEM fork base\u003cbr\u003e- fixation of the mudguard and the air ducts\u003cbr\u003e- for racing and OEM mudguards\u003c\/p\u003e","brand":"Alpha Racing Performance Parts","offers":[{"title":"Default Title","offer_id":46122255122661,"sku":"4663B011A00","price":75.76,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0682\/5646\/5125\/files\/F220970333.png?v=1726640997"},{"product_id":"alpha-racing-fairing-mounting-kit-m1000rr-2023","title":"Alpha Racing Fairing mounting kit M1000RR 2023+","description":"\u003cp\u003eMounting kit for racing bodywork, BMW M 1000 RR 2023- (K66), 6-piece\u003c\/p\u003e\u003cp\u003eStainless steel bodywork bracket kit for mounting the race fairing by means of quick-release fasteners, as well as receptacles for the lambda sensor plugs. For use with M Race Calibration Kit wiring loom.\u003c\/p\u003e\n\n\u003cp\u003e- 6-piece\u003c\/p\u003e\n\n\u003cp\u003e- incl. quick fasteners\u003c\/p\u003e\n\n\u003cp\u003e- incl. two receptacles for lambda sensor plugs\u003c\/p\u003e","brand":"Alpha Racing Performance Parts","offers":[{"title":"Default Title","offer_id":46122255253733,"sku":"4663B022B00","price":175.78,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0682\/5646\/5125\/files\/F220972421.png?v=1726641864"},{"product_id":"carbonin-avio-fiber-wsbk-race-bodywork-2020-k67-bmw-s1000rr","title":"Carbonin Avio Fiber WSBK Race Bodywork 2020 K67 BMW S1000RR","description":"\u003cp\u003eParts Included with Kit\u003c\/p\u003e\u003cp\u003eupper race faring (6 Dzus)\u003c\/p\u003e\u003cp\u003elower fairing (4 Dzus)\u003c\/p\u003e\u003cp\u003eleft side panel right side panel\u003c\/p\u003e\u003cp\u003esingle race seat\/Tail unit(2 pcs)\u003c\/p\u003e\u003cp\u003eAirbox Cover With side panels Required to install- Bracket kit for Installation (must be purchased separately) IN403B\u003c\/p\u003e\u003cp\u003eThere are 2 types of Rear Bracket kits- oem and SBK subframe\u003c\/p\u003e\u003cp\u003eThere are 3 options for seats \u003c\/p\u003e\u003cp\u003ePlease Note OEM air intake will need to be modified to fit race bodywork. It is recommended to use the racing fairing bracket and air intake tube\u003c\/p\u003e\u003cp\u003e\u003ciframe src=\"\/\/www.youtube.com\/embed\/JWYb8K71Mn0\" width=\"560\" height=\"314\" allowfullscreen=\"allowfullscreen\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eAvio Fiber fairings\u003c\/strong\u003e (epoxy resin) is an alternative to standard fiber glass fairings (gfk) because it is lighter, flexible and stronger. Reinforced with Carbon Fiber, these fairings are of the highest standards required by professional race teams for perfect fitment and ease of removal and installation.\u003c\/p\u003e\n\n\u003cp\u003eThese fairings save time fitting because they come with all the Dzus fasteners pre-fitted and the bodywork holes drilled (uppers are left undrilled at the fairing bracket because different aftermarket options for fairing brackets are available). Some models secure to the OEM fairing bracket via the screen holes.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eSeat Options\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003eBasic\u003c\/strong\u003e - This seat is a 15mm neoprene foam glued to a base that is molded from the seat pan of the tail section and then attaches to the seat pan with bolts. Please not that these seat's will only fit carbonin seat pans and seat units. It will not work on any other brand. This foam will wear out like any other foam pad.\u003cbr\u003e\u003cstrong\u003eStandard\u003c\/strong\u003e - This is an upgrade to the basic seat which is covered in a neoprene material that protects the basic foam and provides the rider a level of grip but without compromising the need to slide side to side. It looks much more professional and will protect the basic foam from any wear from patches on leather suits or abuse from side to side movements. we have seen these seats go on for 3 seasons or more!\u003cbr\u003e\u003cstrong\u003ePro Seat\u003c\/strong\u003e - This seat is for riders or teams that require their seat to provide back support or a step seat to keep them in a position from sliding too far back in the seat under acceleration, this is often done with a raised section so they can still get back in the seat in the full tuck, they are just raised up more which helps keep the butt up and their head shoulders and chest lower in the tuck. It is the same material as the standard seat but can also be customized with team logo's or race number -If you purchase a pro seat we will contact you to design your seat. Please note pro seats are made custom to order\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003ePaint\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eWe offer Professional Paint service so you can receive your bodywork pre painted ready to install out of the box.\u003c\/p\u003e\n\n\u003cp\u003ePlease select between matte or gloss finish and Metallic or Pearl finish options in the dropdown selector\u003c\/p\u003e\n\n\u003cp\u003eDownload the Paint \u0026amp; Design form with RAL COLOR CODES below in the documents tab\u003c\/p\u003e\n\n\u003cp\u003e We will contact you after your order for the RAL color code and finish option.\u003c\/p\u003e\n\n\u003cp\u003e \u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eCustom Decal Design\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eWe offer a custom design service\u003cstrong\u003e \u003c\/strong\u003eso your bodywork can turn up with graphics so all you need to do is unbox and install to your motorcycle\u003c\/p\u003e\n\n\u003cp\u003eDownload the Paint \u0026amp; Design form in the documents tab, fill it out and Our team will contact you after processing your order to discuss your design.\u003c\/p\u003e\n\n\u003cp\u003ePlease note that Graphics can be applied to carbon fiber bodywork without paint however for avio fiber we recommend painting the fairing before adding a graphics kit for the best adhesion.\u003c\/p\u003e\n\n\u003cp\u003eWe do not clearcoat in the graphics as these are designed to be removable as sponsors often change.\u003c\/p\u003e","brand":"Carbonin","offers":[{"title":"Default Title","offer_id":46433364902117,"sku":"B42100AF","price":1558.63,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0682\/5646\/5125\/files\/F220907493.jpg?v=1726564992"},{"product_id":"carbonin-carbon-fiber-rear-fender-2020-k67-bmw-s1000rr","title":"Carbonin Carbon Fiber Rear Fender 2020 K67 BMW S1000RR","description":"\u003cp\u003eCarbon fiber rear fender oem replacement\u003c\/p\u003e\u003cp\u003eCarbon Fiber Accessories made with Plane weave carbon and in some case  pre-pregnated carbon fiber on the inside \u003c\/p\u003e\n\n\u003cp\u003eThey are Vacuum bagged and cured in an autoclave with special techniques developed over years of perfecting the art making them to the highest standards required by professional race teams for perfect fitment and ease of removal and installation.\u003c\/p\u003e\n\n\u003cp\u003eThese fairings save time installing because they come with all the Dzus fasteners pre-installed and the bodywork holes drilled (uppers are left undrilled at the fairing bracket because different aftermarket options for fairing brackets are available). Some models secure to the OEM fairing bracket via the screen holes.\u003c\/p\u003e\n\n\u003cp\u003eCarbonin are an Official Partner of BMW Motorrad and work in development with teams such as BMW Motorrad WSBK ,YART Yamaha Austria Racing Team and Honda Racing UK \u0026amp; CIA Honda In wssp\u003c\/p\u003e\n\n\u003cp\u003eCarbonin worked with BMW during the design phase of the New S1000RR for their race project to develop a kit for the Race team per their requirements. You can now buy these very products that Tom Sykes and Markus Reiterberger use on their World Superbike.\u003c\/p\u003e\n\n\u003cp\u003eAlso Used by Tyco BMW, Smiths BMW, PR Racing (British Superbikes) Easyrace SBK BMW Team Spain\u003c\/p\u003e","brand":"Carbonin","offers":[{"title":"Default Title","offer_id":46122414571749,"sku":"CB4020","price":256.03,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0682\/5646\/5125\/files\/F220933043.jpg?v=1726570952"},{"product_id":"carbonin-carbon-fiber-frame-protectors-2020-k67-bmw-s1000rr","title":"Carbonin Carbon Fiber Frame Protectors 2020 K67 BMW S1000RR","description":"\u003cp\u003eWhether you're riding on the street or on the track it makes sense to protect your frame, swingarm and engine case covers from any possible damage:\u003c\/p\u003e\u003cp\u003eProtects against damage\u003c\/p\u003e\u003cp\u003eGravel rash\u003c\/p\u003e\u003cp\u003eRoad rash\u003c\/p\u003e\u003cp\u003eWet Lay Carbon Fiber with prepreg carbon laid on the inside for added protection.\u003c\/p\u003e\u003cp\u003eThese are light-weight and do not interfere with any OEM bodywork.\u003c\/p\u003e\u003cp\u003eThese also look great and give your bike a great appearance\u003c\/p\u003e\u003cp\u003eCarbon Fiber Accessories made with Plane weave carbon with Kevlar reinforcment on the inside  for crash protection\u003c\/p\u003e\n\n\u003cp\u003eThey are Vacuum bagged and cured in an autoclave with special techniques developed over years of perfecting the art making them to the highest standards required by professional race teams for perfect fitment and ease of removal and installation.\u003c\/p\u003e\n\n\u003cp\u003eThese fairings save time installing because they come with all the Dzus fasteners pre-installed and the bodywork holes drilled (uppers are left undrilled at the fairing bracket because different aftermarket options for fairing brackets are available). Some models secure to the OEM fairing bracket via the screen holes.\u003c\/p\u003e\n\n\u003cp\u003eCarbonin are an Official Partner of BMW Motorrad and work in development with teams such as BMW Motorrad WSBK ,YART Yamaha Austria Racing Team and Honda Racing UK \u0026amp; CIA Honda In wssp\u003c\/p\u003e\n\n\u003cp\u003eCarbonin worked with BMW during the design phase of the New S1000RR for their race project to develop a kit for the Race team per their requirements. You can now buy these very products that Tom Sykes and Markus Reiterberger use on their World Superbike.\u003c\/p\u003e\n\n\u003cp\u003eAlso Used by Tyco BMW, Smiths BMW, PR Racing (British Superbikes) Easyrace SBK BMW Team Spain\u003c\/p\u003e","brand":"Carbonin","offers":[{"title":"Default Title","offer_id":46122416472293,"sku":"CB4050","price":358.43,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0682\/5646\/5125\/files\/F220907539.jpg?v=1726565018"},{"product_id":"carbonin-carbon-fiber-swingarm-protectors-2020-k67-bmw-s1000rr","title":"Carbonin Carbon Fiber Swingarm Protectors 2020 K67 BMW S1000RR","description":"\u003cp\u003eWhether you're riding on the street or on the track it makes sense to protect your frame, swingarm and engine case covers from any possible damage:\u003c\/p\u003e\u003cp\u003eProtects against damage\u003c\/p\u003e\u003cp\u003eGravel rash\u003c\/p\u003e\u003cp\u003eRoad rash\u003c\/p\u003e\u003cp\u003eWet Lay Carbon Fiber with prepreg carbon laid on the inside for added protection.\u003c\/p\u003e\u003cp\u003eThese are light-weight and do not interfere with any OEM bodywork.\u003c\/p\u003e\u003cp\u003eThese also look great and give your bike a great appearance\u003c\/p\u003e\u003cp\u003eCarbon Fiber Accessories made with Plane weave carbon with Kevlar reinforcment on the inside  for crash protection\u003c\/p\u003e\n\n\u003cp\u003eThey are Vacuum bagged and cured in an autoclave with special techniques developed over years of perfecting the art making them to the highest standards required by professional race teams for perfect fitment and ease of removal and installation.\u003c\/p\u003e\n\n\u003cp\u003eThese fairings save time installing because they come with all the Dzus fasteners pre-installed and the bodywork holes drilled (uppers are left undrilled at the fairing bracket because different aftermarket options for fairing brackets are available). Some models secure to the OEM fairing bracket via the screen holes.\u003c\/p\u003e\n\n\u003cp\u003eCarbonin are an Official Partner of BMW Motorrad and work in development with teams such as BMW Motorrad WSBK ,YART Yamaha Austria Racing Team and Honda Racing UK \u0026amp; CIA Honda In wssp\u003c\/p\u003e\n\n\u003cp\u003eCarbonin worked with BMW during the design phase of the New S1000RR for their race project to develop a kit for the Race team per their requirements. You can now buy these very products that Tom Sykes and Markus Reiterberger use on their World Superbike.\u003c\/p\u003e\n\n\u003cp\u003eAlso Used by Tyco BMW, Smiths BMW, PR Racing (British Superbikes) Easyrace SBK BMW Team Spain\u003c\/p\u003e","brand":"Carbonin","offers":[{"title":"Default Title","offer_id":46122417783013,"sku":"CB4055","price":280.02,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0682\/5646\/5125\/files\/F220909595.jpg?v=1726565021"},{"product_id":"carbonin-carbon-fiber-intake-tube-oem-2020-k67-bmw-s1000rr","title":"Carbonin Carbon Fiber Intake Tube OEM 2020 K67 BMW S1000RR","description":"\u003cp\u003eCarbon fiber tube to replace your oem air tube\u003c\/p\u003e\u003cp\u003eCarbon Fiber Fairings made with Plane weave carbon and in some case pre-pregnated carbon fiber on the inside.\u003c\/p\u003e\n\n\u003cp\u003eThey are Vacuum bagged and cured in an autoclave with special techniques developed over years of perfecting the art making them to the highest standards required by professional race teams for perfect fitment and ease of removal and installation.\u003c\/p\u003e\n\n\u003cp\u003eThese fairings save time installing because they come with all the Dzus fasteners pre-installed and the bodywork holes drilled (uppers are left undrilled at the fairing bracket because different aftermarket options for fairing brackets are available). Some models secure to the OEM fairing bracket via the screen holes.\u003c\/p\u003e\n\n\u003cp\u003eCarbonin are an Official Partner of BMW Motorrad and work in development with teams such as BMW Motorrad WSBK ,YART Yamaha Austria Racing Team and Honda Racing UK \u0026amp; CIA Honda In wssp\u003c\/p\u003e\n\n\u003cp\u003eCarbonin worked with BMW during the design phase of the New S1000RR for their race project to develop a kit for the Race team per their requirements. You can now buy these very products that Tom Sykes and Markus Reiterberger use on their World Superbike.\u003c\/p\u003e\n\n\u003cp\u003eAlso Used by Tyco BMW, Smiths BMW, PR Racing (British Superbikes) Easyrace SBK BMW Team Spain\u003c\/p\u003e\n\n\u003cp\u003eCarbon Fiber Air box intake tubes\u003c\/p\u003e\n\n\u003cp\u003e•\tNot for Road use\u003c\/p\u003e\n\n\u003cp\u003e•\tLarger air intake without vents or doors\u003c\/p\u003e","brand":"Carbonin","offers":[{"title":"Default Title","offer_id":46122417815781,"sku":"CB4066","price":211.23,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0682\/5646\/5125\/files\/F220920587.png?v=1726565014"},{"product_id":"carbonin-carbon-fiber-wsbk-race-bodywork-2020-k67-bmw-s1000rr","title":"Carbonin Carbon Fiber WSBK Race Bodywork 2020 K67 BMW S1000RR","description":"\u003cp\u003eParts Included with Kit\u003c\/p\u003e\u003cp\u003eupper race faring (6 Dzus)\u003c\/p\u003e\u003cp\u003elower fairing (4 Dzus)\u003c\/p\u003e\u003cp\u003eleft side panel right side panel\u003c\/p\u003e\u003cp\u003esingle race seat\/Tail unit(2 pcs)\u003c\/p\u003e\u003cp\u003eAirbox Cover With side panels Required to install- Bracket kit for Installation (must be purchased separately) IN403B\u003c\/p\u003e\u003cp\u003eThere are 2 types of Rear Bracket kits- oem and SBK subframe\u003c\/p\u003e\u003cp\u003eOptional Not Included -There are 3 options for seats \u003c\/p\u003e\u003cp\u003eBasic - This seat is a 15mm neoprene foam glued to a base that is molded from the seat pan of the tail section and then attaches to the seat pan with bolts. Please not that these seat's will only fit carbonin seat pans and seat units. It will not work on any other brand. This foam will wear out like any other foam pad.\u003c\/p\u003e\u003cp\u003eStandard - This is an upgrade to the basic seat which is covered in a neoprene material that protects the basic foam and provides the rider a level of grip but without compromising the need to slide side to side. It looks much more professional and will protect the basic foam from any wear from patches on leather suits or abuse from side to side movements. we have seen these seats go on for 3 seasons or more!\u003c\/p\u003e\u003cp\u003ePro Seat - This seat is for riders or teams that require their seat to provide back support or a step seat to keep them in a position from sliding too far back in the seat under acceleration, this is often done with a raised section so they can still get back in the seat in the full tuck, they are just raised up more which helps keep the butt up and their head shoulders and chest lower in the tuck. It is the same material as the standard seat but can also be customized with team logo's or race number -If you purchase a pro seat we will contact you to design your seat. Please note pro seats are made custom to order\u003c\/p\u003e\u003cp\u003e\u003ciframe src=\"\/\/www.youtube.com\/embed\/JWYb8K71Mn0\" width=\"560\" height=\"314\" allowfullscreen=\"allowfullscreen\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\n\u003cp\u003eCarbon Fiber Fairings made with Plane weave carbon finished in high gloss pre-pregnated carbon fiber on the inside. They are Vacuum bagged and cured in an autoclave with special techniques developed over years of perfecting the art making them to the highest standards required by professional race teams for perfect fitment and ease of removal and installation. These fairings save time installing because they come with all the Dzus fasteners pre-installed and the bodywork holes drilled (uppers are left undrilled at the fairing bracket because different aftermarket options for fairing brackets are available). Some models secure to the OEM fairing bracket via the screen holes. Carbonin are an Official Partner of BMW Motorrad and work in development with teams such as BMW Motorrad WSBK ,YART Yamaha Austria Racing Team and Honda Racing UK \u0026amp; CIA Honda In wssp Carbonin worked with BMW during the design phase of the New S1000RR for their race project to develop a kit for the Race team per their requirements. You can now buy these very products that Tom Sykes and Markus Reiterberger use on their World Superbike. Also Used by Tyco BMW, Smiths BMW, PR Racing (British Superbikes) Easyrace SBK BMW Team Spain\u003c\/p\u003e","brand":"Carbonin","offers":[{"title":"Default Title","offer_id":46122418012389,"sku":"CB42100","price":2991.04,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0682\/5646\/5125\/files\/BMW_right.jpg?v=1768868909"},{"product_id":"carbonin-carbon-fiber-street-track-bodywork-2020-k67-bmw-s1000rr","title":"Carbonin Carbon Fiber Street \u0026 Track Bodywork 2020 K67 BMW S1000RR","description":"\u003cp\u003eThis fairing is for the Trackday enthusiast that is still requiring the use of headlights and a sidestand for street riding.\u003c\/p\u003e\u003cp\u003eWe now sell a kit to include the upper fairing lower fairing and side panels with all of the necessary bracketry for you to purchase to be able to turn your road bike into a track weapon and still be street legal! \u003c\/p\u003e\u003cp\u003eThis lets you retain your oem seat, tail and airbox cover.\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003eParts Included with Carbon Fiber Kit:\u003c\/p\u003e\u003cp\u003e-Upper race faring With Headlights Cut Out including Brackets for Carbonin fairing bracket for headlight mounting and installed quick release fasteners (DZUS)\u003c\/p\u003e\u003cp\u003e-Lower fairing with side stand cut out for use with your kickstand\u003c\/p\u003e\u003cp\u003e-Left side panel \u003c\/p\u003e\u003cp\u003e-Right side panel \u003c\/p\u003e\u003cp\u003e-CNC brackets \u003c\/p\u003e\u003cp\u003e-Dzus fasteners\u003c\/p\u003e\u003cp\u003ePlease Note OEM air intake will need to be modified to fit with this bodywork. It is recommended to use the racing fairing bracket and air intake tube However you can trim your oem air intake tube to remove the inner trim plastic from the oem fairing\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eThis Kit does not include the airbox cover or race tail (seat unit) these parts are available to purchase as a full kit with the headlight and sidestand option \u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003e\u003ca href=\"https:\/\/hhr-performance.myshopify.com\/products\/carbonin-avio-fiber-wsbk-race-bodywork-2020-k67-bmw-s1000rr\"\u003eFull Avio Fiber Kit\u003c\/a\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003e\u003ca href=\"https:\/\/hhr-performance.myshopify.com\/products\/carbonin-carbon-fiber-wsbk-race-bodywork-2020-k67-bmw-s1000rr\"\u003eFull Carbon Fiber Kit\u003c\/a\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003e\u003ciframe src=\"\/\/www.youtube.com\/embed\/JWYb8K71Mn0\" width=\"560\" height=\"314\" allowfullscreen=\"allowfullscreen\"\u003e\u003c\/iframe\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eCarbon Fiber Fairings made with Plane weave carbon finished in high gloss pre-pregnated carbon fiber on the inside.\u003cbr\u003eThey are Vacuum bagged and cured in an autoclave with special techniques developed over years of perfecting the art making them to the highest standards required by professional race teams for perfect fitment and ease of removal and installation.\u003cbr\u003e\u003cbr\u003eThese fairings save time installing because they come with all the Dzus fasteners pre-installed and the bodywork holes drilled (uppers are left undrilled at the fairing bracket because different aftermarket options for fairing brackets are available). Some models secure to the OEM fairing bracket via the screen holes.\u003cbr\u003e\u003cbr\u003eCarbonin are an Official Partner of BMW Motorrad and work in development with teams such as BMW Motorrad WSBK ,YART Yamaha Austria Racing Team and Honda Racing UK \u0026amp; CIA Honda In wssp\u003cbr\u003eCarbonin worked with BMW during the design phase of the New S1000RR for their race project to develop a kit for the Race team per their requirements. You can now buy these very products that Tom Sykes and Markus Reiterberger use on their World Superbike.\u003cbr\u003eAlso Used by Tyco BMW, Smiths BMW, PR Racing (British Superbikes) Easyrace SBK BMW Team Spain\u003c\/p\u003e","brand":"Carbonin","offers":[{"title":"Default Title","offer_id":46122418045157,"sku":"CB42100-CUTF","price":2184.76,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0682\/5646\/5125\/files\/F220951063.jpg?v=1726630539"},{"product_id":"carbonin-inox-stays-for-side-panels-left-right-2020-bmw-s1000rr","title":"Carbonin Inox Stays For Side Panels Left \u0026 Right 2020 BMW S1000RR","description":"\u003cp\u003eCarbonin Side Panel brackets Dzus (2pcs) 2020 K67 BMW S1000RR Required for installing side panel on Carbonin race bodywork for the 2020 K67 BMW S100RR Carbonin Bodywork\u003c\/p\u003e\u003cp\u003eThese brackets are used to install the side panels for the carbonin avio fiber and carbon fiber bodywork\u003c\/p\u003e\n\n\u003cp\u003eThey come with Dzus fasteners so make removing bodywork Fast with a 1\/4 turn\u003c\/p\u003e\n\n\u003cp\u003eThis is the same product used by WSBK Team Also Used by Tyco BMW, Smiths BMW, PR Racing (British Superbikes) Easyrace SBK BMW Team Spain\u003c\/p\u003e","brand":"Carbonin","offers":[{"title":"Default Title","offer_id":46122456482021,"sku":"IN402B","price":54.36,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0682\/5646\/5125\/files\/F220920905.jpg?v=1726567648"},{"product_id":"carbonin-inox-stays-lower-fairings-2020-k67-bmw-s1000rr","title":"Carbonin Inox Stays Lower Fairings 2020 K67 BMW S1000RR","description":"\u003cp\u003eCarbonin Lower Fairings Brackets 3pcs 2020 K67 BMW S1000RR Required brackets for installing lower Carbonin Fairing\u003c\/p\u003e\u003cp\u003eThese brackets are used to install the lower fairing for the carbonin avio fiber and carbon fiber bodywork\u003c\/p\u003e\n\n\u003cp\u003eThey come with Dzus fasteners so make removing bodywork Fast with a 1\/4 turn\u003c\/p\u003e\n\n\u003cp\u003eThis is the same product used by WSBK Team Also Used by Tyco BMW, Smiths BMW, PR Racing (British Superbikes) Easyrace SBK BMW Team Spain.\u003c\/p\u003e","brand":"Carbonin","offers":[{"title":"Default Title","offer_id":46122456711397,"sku":"IN403B","price":78.19,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0682\/5646\/5125\/files\/F220920906.jpg?v=1726567651"},{"product_id":"alpha-racing-fairing-mounting-kit-m1000rr-2025","title":"Alpha Racing Fairing mounting kit M1000RR 2025+","description":"\u003cp\u003e\u003cspan\u003eFairing mounting kit for fastening the racing bodywork using quick-release fasteners. For use with M Race Calibration Kit wiring loom.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003e- 6-piece\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e- including quick-release fasteners\u003c\/span\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e6x fairing brackets\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e6x quick release incl. bolts\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eMounting material\u003c\/span\u003e\u003c\/p\u003e","brand":"Alpha Racing Performance Parts","offers":[{"title":"Default Title","offer_id":47644780626149,"sku":"4663B066A00","price":175.78,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0682\/5646\/5125\/files\/4663b066a00_33703_1920x1920_ae58cb9c-ea84-4bdd-9bd5-206e62fdbcd5.jpg?v=1757347493"},{"product_id":"alpha-racing-fairing-6-piece-carbon-set-bmw-m1000-rr-2025-k66-carbon-prepreg-material","title":"Alpha Racing Fairing 6-piece carbon set BMW M1000 RR 2025+ (K66), carbon prepreg material","description":"\u003cdiv class=\"product-detail-tabs is-desktop-only\"\u003e\n\u003cdiv class=\"card card-tabs\"\u003e\n\u003cdiv class=\"product-detail-tabs-content card-body\"\u003e\n\u003cdiv class=\"tab-content\"\u003e\n\u003cdiv class=\"tab-pane fade show active\" id=\"description-tab-pane\" role=\"tabpanel\" aria-labelledby=\"description-tab\"\u003e\n\u003cdiv class=\"offcanvas-content-container\"\u003e\n\u003cdiv class=\"product-detail-description tab-pane-container\"\u003e\n\u003cdiv class=\"product-detail-description-text row\" itemprop=\"description\"\u003e\n\u003cdiv class=\"col-12 col-lg-6\"\u003eRacing bodywork kit made of high quality carbon prepreg material.\u003cbr\u003eMade by Ilmberger Carbon.\u003cbr\u003e\u003cbr\u003eIn the design and manufacture of this component, the focus is on weight savings (usually savings of about 70% compared to the original component), higher rigidity and a perfect design.\u003cbr\u003e\u003cbr\u003eThis carbon kit was manufactured according to the latest guidelines in an autoclave completely from prepreg material and in the next step, to protect against environmental influences, covered with a clear plastic coating. This plastic coating surpasses the usual clear coating in terms of protective effect, scratch resistance and durability. But the coating does not only score technically, it also clearly underlines the three-dimensional effect of the carbon structure once again.\u003cbr\u003e\u003cbr\u003eWe recommend using the bodywork parts only in combination with other parts from the carbon racing series (see Accessories tab). Racing fairing parts cannot be mounted together with OEM fairing components, there is no positive fit.\u003cbr\u003e\u003cbr\u003ePlease note:\u003cbr\u003e- Use only in combination with Racing exhaust system.\u003cbr\u003e- Fits with racing dashboard \u0026amp; fairing carrier.\u003cbr\u003e- An additional bracket kit is required for installation (see Accessories).\u003cbr\u003e- OEM air intake duct can be used, alternatively we offer carbon or fiberglass air intakes (see Accessories).\u003cbr\u003e\u003cbr\u003eWeight: 3.350 kg\/ 7.37lbs\u003c\/div\u003e\n\u003cdiv class=\"col-12 col-lg-6\"\u003e\n\u003ch4\u003eDelivery Scope\u003c\/h4\u003e\n\u003cp\u003eFairing upper part\u003cbr\u003eFairing lower part\u003cbr\u003eFairing side part right\u003cbr\u003eFairing side part left\u003cbr\u003e2x Winglet left \u0026amp; right\u003cbr\u003e20x Quick release fastener\u003cbr\u003e2x Closing plugs for lower part\u003c\/p\u003e\n\u003cbr\u003e\n\u003ch4\u003eNote\u003c\/h4\u003e\n\u003cp\u003eWhen using the large kit radiator, the fairing may need to be adjusted slightly.\u003cbr\u003eDecals are not included in the scope of delivery.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-detail-tabs product-detail-cross-selling\"\u003e\n\u003cdiv class=\"cs-tabs card card-tabs\" data-cross-selling=\"true\"\u003e\n\u003cdiv class=\"card-header product-detail-tab-navigation product-cross-selling-tab-navigation\"\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"Alpha Racing Performance Parts","offers":[{"title":"Default Title","offer_id":47644895281381,"sku":"4663B070B00","price":4917.79,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0682\/5646\/5125\/files\/4663b070b00_03_34415_1920x1920_36522fcb-1de7-4055-a232-03e7176a2517.jpg?v=1757347796"},{"product_id":"alpha-racing-fairing-set-grp-bmw-m1000rr-2025","title":"Alpha Racing Fairing set GRP BMW M1000RR 2025","description":"\u003cp\u003e\u003cspan\u003eRacing bodywork kit made of high quality fiberglass prepreg material.\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eMade by Ilmberger Carbon.\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eIn the design and manufacture of the components, the focus is on weight savings, greater rigidity and a perfect design. In addition, the aerodynamics are optimized, compared to the series fairing.\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eThe fiberglass parts were manufactured according to the latest guidelines in the autoclave completely from prepreg material.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eWe recommend to use the bodywork parts only in combination with other parts from the fiberglass racing series (see Accessories tab). Racing fairing parts cannot be mounted together with OEM fairing components, there is no positive fit.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003ePlease note:\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e- Use only in combination with Racing exhaust system.\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e- Fits with racing dashboard \u0026amp; fairing carrier.\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e- An additional bracket kit is required for installation sku 4663B066A00.\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e- OEM air intake duct can be used, alternatively we offer carbon or fiberglass air intakes \u003c\/span\u003e\u003c\/p\u003e\n\u003ch4\u003eDelivery Scope\u003c\/h4\u003e\n\u003cp\u003eFairing upper part\u003cbr\u003eFairing lower part\u003cbr\u003eFairing side part right\u003cbr\u003eFairing side part left\u003cbr\u003e2x Winglet left \u0026amp; right, Carbon\u003cbr\u003e20x Quick release fastener\u003cbr\u003e2x Closing plugs for lower part\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cbr\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003ch4\u003eNote\u003c\/h4\u003e\n\u003cp\u003eWhen using the large kit radiator, the fairing may need to be adjusted slightly.\u003cbr\u003eThe surface of the fiberglass products is not paint-ready and may need to be processed before surface finishing.\u003cbr\u003eDecals are not included in the scope of delivery.\u003c\/p\u003e","brand":"Alpha Racing Performance Parts","offers":[{"title":"Default Title","offer_id":47645124985061,"sku":"4663B070A00","price":3020.98,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0682\/5646\/5125\/files\/4663b070a00_04_34403_1920x1920_2c90050e-9722-4144-b79f-27860e2e369c.jpg?v=1757350929"},{"product_id":"alpha-racing-fender-bracket-set-for-m1000rr-racing-fender-1","title":"Alpha Racing Fender Bracket set for M1000RR Racing Fender","description":"\u003cp\u003eBracket set for front fenders, BMW M 1000 RR 2023- (K66), secure attachment of the fender to the fork base\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e2x Bracket for fork foot (left \u0026amp; right side)\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e2x Snap Lock, rubber\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e2x Cable Tie\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eWith the clip-on bracket set, the racing fender is easily and securely fixed to the fork foot and also ensures the correct positioning of the integrated air ducts of the front wheel brake. The holders can also be used together with the OEM fender, they are required if the wheel covers and the associated holder construction are omitted.\u003cbr\u003e\u003cbr\u003e- light clip-on holder for the OEM fork base\u003cbr\u003e- fixation of the mudguard and the air ducts\u003cbr\u003e- for racing and OEM mudguards\u003c\/p\u003e","brand":"Alpha Racing Performance Parts","offers":[{"title":"Default Title","offer_id":48405211218149,"sku":"4663B011B00","price":85.76,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0682\/5646\/5125\/files\/4663b011b00_37489_1920x1920_a7293c04-eaa1-4a22-b72d-25b3b8b2a2c0.jpg?v=1770930258"},{"product_id":"alpha-racing-carbon-fiber-tail-unit-s1000rr-m1000rr-23-26low-version","title":"Alpha Racing Carbon Fiber Tail Unit S1000RR M1000RR 23-26 Low version","description":"\u003cp\u003eRace tail carbon low version BMW S1000 RR 2023 to 26 sahpe (K67) and M1000 RR 2023-26 (K66), fits to OEM and racing subframe, Brackets riquired*\u003cstrong\u003eDOES NOT FIT WITH OEM AIRBOX OR SEAT\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan\u003eThe lower positioning of the seat plate is a direct evolution from WorldSBK, derived from the needs of BMW Motorrad Motorsport factory riders. With a seat height reduced by around 30 mm, the race tail fulfills the general trend towards a lower seating position.\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eRacing tail section made of high-quality carbon prepreg material, by Ilmberger Carbon.\u003cbr\u003e\u003cbr\u003eIn the design and manufacture of this component, the focus is on weight savings (usually savings of about 70% compared to the original component), higher rigidity and a perfect design.\u003cbr\u003e\u003cbr\u003eThis carbon part was manufactured according to the latest guidelines in an autoclave completely from prepreg material and in the next step, to protect against environmental influences, covered with a clear plastic coating. This plastic coating surpasses the usual clear coating in terms of protective effect, scratch resistance and durability. But the coating does not only score technically, it also clearly underlines the three-dimensional effect of the carbon structure once again.\u003cbr\u003e\u003cbr\u003eWe recommend using the bodywork parts only in combination with other parts from the carbon racing series. Racing fairing parts cannot be mounted together with OEM fairing components, there is no positive fit.\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eRoll racers will love this as you can remove your airbox cover and this will fit\u003c\/p\u003e\n\u003cp\u003eRace tail\u003cbr\u003e2x Seat mount OEM subframe\u003cbr\u003e2x Seat mount Racing subframe\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003ch4\u003eNote\u003c\/h4\u003e\n\u003cp\u003e- The seat plate must be ordered separately Pictured to show how it looks but not included\u003cbr\u003e- By using different seat plates, the seat height and the seat position can be adjusted to the rider's needs. 10mm 30mm alph aracing seats for example\u003cbr\u003e- The OEM seat can not be used in combination with the race tail.\u003cbr\u003e- For mounting on the OEM rear frame an additional bracket set is required\u003c\/p\u003e","brand":"Alpha Racing Performance Parts","offers":[{"title":"Default Title","offer_id":48783187116261,"sku":"4663B070B09","price":857.45,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0682\/5646\/5125\/files\/4663b070b09_39651_1920x1920_89bbda70-7462-4423-ab28-ddd6763769f6.jpg?v=1776177257"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0682\/5646\/5125\/collections\/F220965033.jpg?v=1727355161","url":"https:\/\/hhrperformance.com\/collections\/select-motorcycle-bmw-bmw-m1000rr-bodywork.oembed","provider":"HHR Performance","version":"1.0","type":"link"}