{"product_id":"aim-eclipse-150mm-potentiometer-with-rod-end-bearing-joint","title":"AiM Eclipse 150mm Linear Potentiometer","description":"\u003cp\u003eThe AiM ECLIPSE is a motorsport-grade linear potentiometer built for car and bike racing. Use it to log damper compression\/extension or steering rack displacement on any AiM data logger. It's quick to install and delivers excellent accuracy, repeatability and service life.\u003c\/p\u003e\n\n\u003ch3\u003eInductive Contactless Technology\u003c\/h3\u003e\n\u003cp\u003eNo physical contact inside the sensor means virtually no wear — performance stays consistent for the life of the unit (25+ million cycles).\u003c\/p\u003e\n\n\u003ch3\u003eLightweight, Tough Materials\u003c\/h3\u003e\n\u003cp\u003eThe housing is fiberglass-reinforced epoxy: strong under mechanical stress and heat cycling, flame resistant, self-extinguishing and an excellent electrical insulator. The shaft is extruded carbon fiber instead of steel, keeping weight down to just 20–40 g without giving up strength.\u003c\/p\u003e\n\n\u003ch3\u003eBuilt-In Diagnostics\u003c\/h3\u003e\n\u003cp\u003eSignal output runs 500–4,500 mV so faults are easy to spot in your data:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eReading below 100 mV = fault (open circuit)\u003c\/li\u003e\n\u003cli\u003eReading above 4,900 mV = fault (short circuit)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eEasy Setup in RaceStudio 3\u003c\/h3\u003e\n\u003cp\u003eThe RaceStudio 3 configuration panel lets you set the sensor parameters and quickly choose whether it reads extension or compression.\u003c\/p\u003e\n\n\u003ch3\u003eJoint Options\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBall Joint (Rod End)\u003c\/strong\u003e – Part # X05ELP150ABJ. Rod-end style ball joints on both ends for a fixed, secure mount.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eQuick Release Pop Joint\u003c\/strong\u003e – Part # X05ELP150APJ. Snap-on joints for fast removal and reinstall between sessions.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eThis Model – 150 mm Travel\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eTravel: 150 mm (5.90\")\u003c\/li\u003e\n\u003cli\u003eRetracted mounting distance: 265 mm (10.43\")\u003c\/li\u003e\n\u003cli\u003eSensor body length: 231 mm (9.09\")\u003c\/li\u003e\n\u003cli\u003eConnector: 4-pin Binder 719 male (plugs into AiM devices)\u003c\/li\u003e\n\u003cli\u003eMounting: M4 x 0.7 male thread on both ends\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eSupply: 5 Vdc reference\u003c\/li\u003e\n\u003cli\u003eSignal output: 500 mV (zero) to 4,500 mV (full range)\u003c\/li\u003e\n\u003cli\u003eRepeatability: ≤ 0.01 mm\u003c\/li\u003e\n\u003cli\u003eIndependent linearity: ≤ ±0.5%\u003c\/li\u003e\n\u003cli\u003eOperational speed: ≤ 10 m\/s\u003c\/li\u003e\n\u003cli\u003eMechanical life: \u0026gt; 25 million cycles\u003c\/li\u003e\n\u003cli\u003eOperating temperature: -30°C to +100°C\u003c\/li\u003e\n\u003cli\u003eWaterproof rating: IP65\u003c\/li\u003e\n\u003cli\u003eHousing: fiberglass-reinforced epoxy resin\u003c\/li\u003e\n\u003cli\u003eShaft: carbon fiber\u003c\/li\u003e\n\u003cli\u003eWeight: 20–40 g\u003c\/li\u003e\n\u003cli\u003eCable: 500 mm, high-temp M22759 AWG26 wires with Viton sleeve\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003ePinout (Binder 719)\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003ePin 1 – Analog signal (white)\u003c\/li\u003e\n\u003cli\u003ePin 2 – GND (black)\u003c\/li\u003e\n\u003cli\u003ePin 3 – Not connected\u003c\/li\u003e\n\u003cli\u003ePin 4 – Vref 5 Vdc (blue)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eInstallation Notes\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eConnects to any analog channel on AiM loggers.\u003c\/li\u003e\n\u003cli\u003eDon't overtighten the mounting hardware — bending the internal cylinder can damage the sensor.\u003c\/li\u003e\n\u003cli\u003eExtend the shaft about 5 mm (0.2\") from the fully retracted position when mounting.\u003c\/li\u003e\n\u003cli\u003eDo not use beyond the sensor's maximum travel.\u003c\/li\u003e\n\u003cli\u003eEVO4S and Channel Expansion require an extension cable (V02PCB__BTXG series). MXL2, MXS\/MXG\/MXP, EVO5, PDM and similar use the V02PCB__B series. Available 500–3000 mm.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"AiM Sports","offers":[{"title":"Quick Release Pop Joint","offer_id":68023429759205,"sku":"X05ELP150APJ","price":300.0,"currency_code":"USD","in_stock":true},{"title":"Ball Joint (Rod End)","offer_id":68024341692645,"sku":"X05ELP150ABJ","price":300.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0682\/5646\/5125\/files\/F220972814.png?v=1726642044","url":"https:\/\/hhrperformance.com\/products\/aim-eclipse-150mm-potentiometer-with-rod-end-bearing-joint","provider":"HHR Performance","version":"1.0","type":"link"}