Search Results

12 results for Teknofibra

Browse Products

View
 
Items 1-12 of 12
Description: Teknofibra 2" x 33ft tape roll to use for joint cover and edge finishing. Manufactured from the same alloy covering as one the teknofibra sheets and applied with the same adhesive as the teknofibra sheets also.

Also available in 1" width.

The material is best used with an air gap of 5mm between heat source and panel it is attached too. Can manage temperatures up to 1472°F 800°C only transferring through 97°F-35°C on the reverse of the panel it is mounted to. Adhesive backed able to mount to any clean material and the adhesive glue capable of temperatures up to 482°F-250°C.
Item #: US18000000010A
Condition: New
Limited Supply: Only 7 Left!
Price: $25.00
Qty:

Description: Teknofibra 1" tape roll; to use for joint cover and edge finishing. Manufactured from the same alloy covering as one the sheets and applied with the same adhesive as the sheets also.

Also available in 2" width.

The material is best used with an air gap of 5mm between heat source and panel it is attached too. Can manage temperatures up to 800'C only transfering through 35'C on the reverse of the panel it is mounted to. Adhesive backed able to mount to any clean material and the adhesive glue capable of temperatures up to 250'C.
Item #: US1800000009A
Condition: New
Price: $15.00
Qty:

Description: TeknoFibra Contact sheet dimensions are 0.62m x 0.27m. This is the newest in the range of the Teknofibra brand; Teknofibra contact can be in direct contact with the heat source if required and is able to manage temperatures up to 1000'C only transfering through 54'C on the reverse of the panel it is attached to. Again adhesive backed which is able to manage temperatures up to 250'C (more than the material transmits).
Item #: US1800000007A
Condition: New
Limited Supply: Only 2 Left!
Price: $75.00

Qty:

Description: Teknofibra flexible heat material, this is the 4mm sheet measuring at 1m x 0.61m. The material is best used with an air gap of 5mm between heat source and panel it is attached too. Can manage temperatures up to 800'C only transfering through 35'C on the reverse of the panel it is mounted to. Adhesive backed able to mount to any clean material and the adhesive glue capable of temperatures up to 250'C.
Item #: US1800000017A
Condition: New
Price: $115.00

Qty:

Description: Teknofibra flexible heat material, this is the 2mm sheet measuring at 1m x 0.61m. The material is best used with an air gap of 5mm between heat source and panel it is attached too. Can manage temperatures up to 700'C only transfering through 35'C on the reverse of the panel it is mounted to. Adhesive backed able to mount to any clean material and the adhesive glue capable of temperatures up to 250'C.
Item #: US1800000015A
Condition: New
Limited Supply: Only 6 Left!
Price: $114.00

Qty:

Description:
2015-19 Yamaha R1 R1M MT-10




Teknofibra Heat shield material is designed to keep any radiant temperature from the engine or exhaust from heating up the fuel in the tank.
Cooler fuel = better performance.
Heat is the enemy when it comes to robbing power.
Its not just only the water temperature that you need to keep cool for optimum performance, Keeping your fuel cool produces the best power and why spend that extra money on race fuel if it is not staying cool.
Ever wonder why teams keep their fuel in fridges or on ice? add it at the last minute? Not to mention when it heats up it expands and it could be the difference of fitting that last 1/8th of a gallon in to finish that race!

These kits come pre cut to fit your model motorcycle , all you need to do is remove any factory heat sheild material clean with a degreaser and install your Teknofibra material , It really is simple.

This material is thinner and lighter than the material that comes from the factory which is a mineral based fiber.
Teknofibra is unlike anything else and will not burn or catch fire, it is non toxic and has proven to keep fuel temps up to 48degrees F cooler than oem material

Technical partner of JIR, Teknofibra® has long been known in the industry and used by prestigious Moto2, World Superbike, CIV and many others teams, for the following applications:

Protection of fairing and belly positioned in close proximity of the exhaust pipes.
Interposed between air box and throttle body allows the aspiration of cold air.
Glued under the tank keeps the lower the fuel temperature.
It maintains a stable temperature of the gas /oil on the nitrogen tank bladder of the dampers installed near the exhaust pipes.
Protects the battery and wiring avoiding problems to the ECU.
Protection of electronic components in hot areas.
Under the saddle and the cowl cover It protects the rider from the heat transmitted from the engine and the exhaust system.
More generally, to solve any problem of heat.
Item #: 400103001
Condition: New
Limited Supply: Only 2 Left!
Price: $165.00

Qty:

Description:
2017-19 Honda CBR-1000RR SP2



Teknofibra Heat shield material is designed to keep any radiant temperature from the engine or exhaust from heating up the fuel in the tank.
Cooler fuel = better performance.
Heat is the enemy when it comes to robbing power.
Its not just only the water temperature that you need to keep cool for optimum performance, Keeping your fuel cool produces the best power and why spend that extra money on race fuel if it is not staying cool.
Ever wonder why teams keep their fuel in fridges or on ice? add it at the last minute? Not to mention when it heats up it expands and it could be the difference of fitting that last 1/8th of a gallon in to finish that race!

These kits come pre cut to fit your model motorcycle , all you need to do is remove any factory heat sheild material clean with a degreaser and install your Teknofibra material , It really is simple.

This material is thinner and lighter than the material that comes from the factory which is a mineral based fiber.
Teknofibra is unlike anything else and will not burn or catch fire, it is non toxic and has proven to keep fuel temps up to 48degrees F cooler than oem material

Technical partner of JIR, Teknofibra® has long been known in the industry and used by prestigious Moto2, World Superbike, CIV and many others teams, for the following applications:

Protection of fairing and belly positioned in close proximity of the exhaust pipes.
Interposed between air box and throttle body allows the aspiration of cold air.
Glued under the tank keeps the lower the fuel temperature.
It maintains a stable temperature of the gas /oil on the nitrogen tank bladder of the dampers installed near the exhaust pipes.
Protects the battery and wiring avoiding problems to the ECU.
Protection of electronic components in hot areas.
Under the saddle and the cowl cover It protects the rider from the heat transmitted from the engine and the exhaust system.
More generally, to solve any problem of heat.
Item #: 40010102002
Condition: New
Limited Supply: Only 2 Left!
Price: $165.00

Qty:

Description: Thermal Heat protection for fuel tank
Item #: 400101001
Condition: New
Limited Supply: Only 9 Left!
Price: $165.00

Qty:

Description: Teknofibra Heat shield material is designed to keep any radiant temperature from the engine or exhaust from heating up the fuel in the tank.
Cooler fuel = better performance.
Heat is the enemy when it comes to robbing power.
Its not just only the water temperature that you need to keep cool for optimum performance, Keeping your fuel cool produces the best power and why spend that extra money on race fuel if it is not staying cool.
Ever wonder why teams keep their fuel in fridges or on ice? add it at the last minute? Not to mention when it heats up it expands and it could be the difference of fitting that last 1/8th of a gallon in to finish that race!

These kits come pre cut to fit your model motorcycle , all you need to do is remove any factory heat sheild material clean with a degreaser and install your Teknofibra material , It really is simple.

This material is thinner and lighter than the material that comes from the factory which is a mineral based fiber.
Teknofibra is unlike anything else and will not burn or catch fire, it is non toxic and has proven to keep fuel temps up to 48degrees F cooler than oem material

Technical partner of JIR, Teknofibra® has long been known in the industry and used by prestigious Moto2, World Superbike, CIV and many others teams, for the following applications:

Protection of fairing and belly positioned in close proximity of the exhaust pipes.
Interposed between air box and throttle body allows the aspiration of cold air.
Glued under the tank keeps the lower the fuel temperature.
It maintains a stable temperature of the gas /oil on the nitrogen tank bladder of the dampers installed near the exhaust pipes.
Protects the battery and wiring avoiding problems to the ECU.
Protection of electronic components in hot areas.
Under the saddle and the cowl cover It protects the rider from the heat transmitted from the engine and the exhaust system.
More generally, to solve any problem of heat.
Item #: 400103003
Condition: New
Limited Supply: Only 6 Left!
Price: $165.00

Qty:

Description: Teknofibra Heat shield material is designed to keep any radiant temperature from the engine or exhaust from heating up the fuel in the tank.
Cooler fuel = better performance.
Heat is the enemy when it comes to robbing power.
Its not just only the water temperature that you need to keep cool for optimum performance, Keeping your fuel cool produces the best power and why spend that extra money on race fuel if it is not staying cool.
Ever wonder why teams keep their fuel in fridges or on ice? add it at the last minute? Not to mention when it heats up it expands and it could be the difference of fitting that last 1/8th of a gallon in to finish that race!

These kits come pre cut to fit your model motorcycle , all you need to do is remove any factory heat sheild material clean with a degreaser and install your Teknofibra material , It really is simple.

This material is thinner and lighter than the material that comes from the factory which is a mineral based fiber.
Teknofibra is unlike anything else and will not burn or catch fire, it is non toxic and has proven to keep fuel temps up to 48degrees F cooler than oem material

Technical partner of JIR, Teknofibra® has long been known in the industry and used by prestigious Moto2, World Superbike, CIV and many others teams, for the following applications:

Protection of fairing and belly positioned in close proximity of the exhaust pipes.
Interposed between air box and throttle body allows the aspiration of cold air.
Glued under the tank keeps the lower the fuel temperature.
It maintains a stable temperature of the gas /oil on the nitrogen tank bladder of the dampers installed near the exhaust pipes.
Protects the battery and wiring avoiding problems to the ECU.
Protection of electronic components in hot areas.
Under the saddle and the cowl cover It protects the rider from the heat transmitted from the engine and the exhaust system.
More generally, to solve any problem of heat.
Item #: 400103002
Condition: New
Limited Supply: Only 8 Left!
Price: $165.00

Qty:

Description: Thermal Heat protection for fuel tanks
Item #: 400105001
Condition: New
Limited Supply: Only 7 Left!
Price: $165.00

Qty:

R1 Febur radiator Oil Cooler
Description: The is an Auxiliary Radiator Oil Cooler with a larger capacity over oem designed to use in connection with your oem stock radiator. It attaches in the same way the oem radiator connects to the oil lines, Care has to be taken as to not too close to exhaust headers or necessary precautions used such as heat shield materials or exhaust wrap installed if needed. Or Teknofibra Sleeves for Oil Lines.

Item #: FE1493
Condition: New
Febur Radiators are often made to order please allow 4 - 6 weeks for production and delivery Special order Items are not eligible for returns
Price: $800.00

Qty:

Items 1-12 of 12

Searching Tips:

  • My search returns too many results, how do I find what I'm looking for?
    Try refining your search by adding new words that help describe what you're looking for to narrow down the results.
  • My search returns no results, but I'm sure what I'm looking for exists. How can I find it?
    Make sure you don't have too many words in your search. The more words you have in a search the lower the chance will be for the search to return results. Try starting off with a couple words describing what you are looking for and adding new words in to refine the results further.
  • I've tried everything but still can't find what I'm looking for, what do I do now?
    If you're still having trouble finding the item you're looking for, you can try contacting us with questions for further assistance.