HHR Performance » 2017, Kawasaki, Ninja ZX-10R

Products for:

  • (X) Year: 2017
  • (X) Make: Kawasaki
  • (X) Model: Ninja ZX-10R

View Universal items for: 2017, Kawasaki, Ninja ZX-10R


Browse Products

Sort
View
 
Items 1-60 of 162
Description:

FKR Cartridge Kit Racing (TTX 25) FKR 105

Comes with 3 different spring rates: 9.5 ,10 & 10.5N/mm.


The racing inspired FKR cartridge kit has technology derived straight from the Moto3, Moto 2 and World Superbike championships developed by our engineers in Sweden and is designed for high end racing.

The FKR Cartridge kit features a spring pressurized system, compared to the old gas pressurized system, the spring pressure offers a more simplistic and user friendly design that also accounts for easier maintenance. But there are more advantages of a spring pressurized system. There is no risk of gas leakage, it also gives a more consistent performance curve and allows for a more compact design. With the Öhlins TTX technology, a new designed piston and an 8mm piston shaft we reduce the pressure build-up and create a faster damping response. That gives a “linear” style of damping characteristics which create more tuning options and also increases grip and bump absorption properties while improving chassis stability.


Part number

FKR 105


Type Code

TTX25 Cartridge Kit FKR


Technical data

Spring series:04744-Serie
Packaging included:springs 9.5, 10.0 % 10.5N/mm

Notes

Not for 2018/19 SE (Semi-active) Version.
Comes with 3 different spring rates: 9.5 ,10 & 10.5N/mm.
It is recommended to contact an authorised ÖHLINS Service Center for installation.


Fits for vehicles

Item #: FKR 105
Condition: New
On-hand inventory ships within 24 hours. Please note supply-chain related delays are possible. Please contact us for ETA
Price: $2,349.00


Description: Rotobox BOOST Front Wheel

The new and improved model BOOST carbon fiber wheel from Rotobox, decreasing the weight from the RBX2 with improved design and higher performance! Comes in gloss and matte finish, in both symmetric and convex designs.

Like the RBX2, the BOOST is produced using Rotobox's unique 3-component composite - combining carbon, epoxy and stainless steel. By integrating the stainless 2,5 mm steel wire in each side of the rim, we increase its impact resistance at the most critical outer part. JWL and DOT approved, having met JASO T203-85 safety standards.

Another hidden BOOST gem - the Structural Rib. Thanks to the High Pressure Core Technology the structural rib is placed in the inner side between the spokes, with its mission to support the stress hot spot of the wheel. As a result the BOOST elegant spoke design brings greater stiffness and although the spokes are thinner the BOOST is stronger than ever - with a permissible static load of 280 kg on the rear and 180kg on the front wheel.

ASSEMBLING COMPONENTS
Carbon fiber composite rim, a one-piece hollow carbon cast, reinforced with stainless steel wire and UV protected; 7075 T6 aluminum alloy hubs, spacers and sprocket carrier [only with rear symmetric wheel]. machined from solid and hard anodized; polyurethane cushion drive set; SKF bearings; aluminum valve stem.

PRODUCT QUALITY CONTROL
Your Rotobox wheel has its own Serial Number to track the production history. We confirm to have performed quality verification procedure of your Rotobox wheel.

SIZE
17" x 3.5"

WEIGHT
REAR WHEEL WEIGHT 2.58 kg / 5.68 LBS

MAX. STATIC LOAD
REAR 180 kg / 400 LBS

MAX. OPERATING TEMPERATURE
100 C / 212 F

MAX. PRESSURE
4 BAR / 58 PSI

The wheels conform to safety standard JASO T203-85 for JWL dotE Certification. Before riding on public streets, be sure to check your local regulations.
Rotobox Boost Wheel set Weight example:
Stock S1000RR 11.70kg (25.79 lbs)
Rotobox Boost 6.69kg (14.74 lbs)
Weight saving more than 5.00kg of rotating mass. Incredible!
Item #: FA70350332
Condition: New
Custom Product: Rotobox Wheels are made to order with a 4-6 week production time. Please feel free to contact us for any questions.
Free Ground Shipping
Price: $1,812.00


Description: Rotobox BOOST Symmetric Rear Wheel

The new and improved model BOOST carbon fiber wheel from Rotobox, decreasing the weight from the RBX2 with improved design and higher performance! Comes in gloss and matte finish, in both symmetric and convex designs.

Like the RBX2, the BOOST is produced using Rotobox's unique 3-component composite - combining carbon, epoxy and stainless steel. By integrating the stainless 2,5 mm steel wire in each side of the rim, we increase its impact resistance at the most critical outer part. JWL and DOT approved, having met JASO T203-85 safety standards.

Another hidden BOOST gem - the Structural Rib. Thanks to the High Pressure Core Technology the structural rib is placed in the inner side between the spokes, with its mission to support the stress hot spot of the wheel. As a result the BOOST elegant spoke design brings greater stiffness and although the spokes are thinner the BOOST is stronger than ever - with a permissible static load of 280 kg on the rear and 180kg on the front wheel.

ASSEMBLING COMPONENTS
Carbon fiber composite rim, a one-piece hollow carbon cast, reinforced with stainless steel wire and UV protected; 7075 T6 aluminum alloy hubs, spacers and sprocket carrier [only with rear symmetric wheel]. machined from solid and hard anodized; polyurethane cushion drive set; SKF bearings; aluminum valve stem.

PRODUCT QUALITY CONTROL
Your Rotobox wheel has its own Serial Number to track the production history. We confirm to have performed quality verification procedure of your Rotobox wheel.

SIZE
17" x 6.00"

WEIGHT
REAR WHEEL WEIGHT 4.11 kg / 9.06 LBS

MAX. STATIC LOAD
REAR 280 kg / 617 LBS

MAX. OPERATING TEMPERATURE
100 C / 212 F

MAX. PRESSURE
4 BAR / 58 PSI

The wheels conform to safety standard JASO T203-85 for JWL dotE Certification. Before riding on public streets, be sure to check your local regulations.
Rotobox Boost Wheel set Weight example:
Stock S1000RR 11.70kg (25.79 lbs)
Rotobox Boost 6.69kg (14.74 lbs)
Weight saving more than 5.00kg of rotating mass. Incredible!
Item #: RA70600711
Condition: New
Custom Product: Rotobox Wheels are made to order with a 4-6 week production time. Please feel free to contact us for any questions.
Free Ground Shipping
Price: $2,410.00


Description:

FGRT Upside Down Front Fork Road & Track FGRT 225

It doesn’t matter if you are heading for a National Roadracing title or if you are taking your bike on a run on
your favourite road. The new Road & Track front fork will give you loads of performance, stable damping and fantastic comfort. The new Road & Track front fork features the Öhlins 30 mm Cartridge Kit inside, a winning kit in several national superbike championships.

Compression and rebound adjustments are easily done with compression adjustment in one leg and rebound
adjustment in the other leg. The new front fork gives a big improvement in tire feel, brake support and the general handling of the bike. The outer design has been redesigned to make this front fork even more attractive.


Part number

FGRT 225


Type Code

Front Fork R&T


Technical data

Length:740 mm
Stroke:120 mm
Rate N/mm:10,5 N/mm
Position:front
Mounted spring:04744-05
Spring series:08790-Serie

Notes

Not for 2018/2019 SE (Semi-active) Version.


Fits for vehicles

Item #: FGRT 225
Condition: New
On-hand inventory ships within 24 hours. Please note supply-chain related delays are possible. Please contact us for ETA
Price: $2,699.00

Qty:

Description:

End of 2017, Öhlins released an updated version of the well-proven TTX GP motorcycle shock absorber. Most of the model range has been replaced by the new version.

There are still some of the pre-2018 shock absorbers in stock and Öhlins DTC starts selling these out with a reduced SRP.

The following pre-2018 products are currently available at a reduced price:

  • AP 363: Aprilia RSV4/RR (2017-2018) > SOLD OUT
  • HO 363: Honda CBR1000RR/SP (2017-2018)
  • KA 035: Kawasaki ZX-10R (2011-2012 )
  • KA 040: Kawasaki ZX-10R (2013-2015) EC shock absorber
  • KA 360: Kawasaki ZX-10R (2010-2015) EC shock absorber
  • KA 364: Kawasaki ZX-10R (2016-2018)
  • TR 361: Triumph Daytona 675/R (2013-2018)

Some of these items are not in stock at ÖDTC. Therefore the delivery may take up to 2 weeks. <span style="font-size: 14px;">The campaign is valid as long as stock lasts. After being sold out, these items cannot be ordered any more.</span>

Item #: HO 363
Condition: New
On-hand inventory ships within 24 hours. Please note supply-chain related delays are possible. Please contact us for ETA
Price: $1,469.00


Description:

TTX GP Shock Absorber KA 468

Based on your bike’s performance, its price and available mounting space we have designed a shock that we think suits it, both when it comes to price and performance.

We start by choosing a type which we tailor-make for your specific bike. The basic setup, the design of the shim stacks and the calibration of the adjusters, is tested both on road and track. They are the results of true tests with your bike and no guesswork!

Öhlins manufactures more than 300 different shock absorber models, each model is tailor-made for one specific bike. The concept of all Öhlins products is not a secret, it is precision. Precision provides superior control of the damping force and the key to our success.


Part number

KA 468


Type Code

T36PR1C1LS

Twin tube
T

Twin tube

Piston diameter
36

Piston diameter: 36 mm

type P
P

Monotube high pressure gas type of shock absorber with external “piggy back” reservoir.

TTX36 R1 rebound damping adjuster
TTX_GP R1 rebound damping adjuster
R1

Adjustable rebound damping. Black adjuster on TTX36 shocks / silver adjuster on TTX GP shocks.

TTX36 C1 compression damping adjuster
TTX GP C1 compression damping adjuster
C1

Adjustable compression damping. Gold adjuster on TTX36 / TTX GP shocks.

L
L

Adjustable length.

S
S

Hose mounted hydraulic spring preload adjuster.


Technical data

Length:311mm +2/-4 mm
Stroke:57 mm
Rate N/mm:95 N/mm
Position:rear
Mounted spring:21041-31
Spring series:21041-xx
Packaging unit:pieces

Fits for vehicles

Item #: KA 468
Condition: New
On-hand inventory ships within 24 hours. Please note supply-chain related delays are possible. Please contact us for ETA
Price: $1,499.00


Description: Rotobox RBX2 Front Wheel

ASSEMBLING COMPONENTS
Carbon fiber composite rim, a one-piece hollow carbon cast, reinforced with stainless steel wire and UV protected; 7075 T6 aluminium alloy hubs, spacers and sprocket carrier [only with rear symmetric wheel]. machined from solid and hard anodized; polyurethane cushion drive set; SKF bearings; aluminium valve stem.

PRODUCT QUALITY CONTROL
Your Rotobox wheel has its own Serial Number to track the production history. We confirm to have performed quality verification procedure of your Rotobox wheel.

SIZE
17" x 3.5"

WEIGHT
REAR WHEEL WEIGHT 2.58 kg / 5.68 LBS

MAX. STATIC LOAD
REAR 150 kg / 330 LBS

MAX. OPERATING TEMPERATURE
100 C / 212 F

MAX. PRESSURE
4 BAR / 58 PSI

The wheels conform to safety standard JASO T203-85 for JWL dotE Certification. Before riding on public streets, be sure to check your local regulations.
The complete set of RBX2 wheels, without brake rotors and sprocket, weighs:
6,65 kg (14.6 lbs) for Kawasaki ZX10R
6,61 kg (14.5 lbs) for Aprilia RSV4
6,90 kg (15.1 lbs) for BMW S1000RR
5,35 kg (11.6 lbs) for Ducati 1199 Panigale
Item #: FA70350132
Condition: New
Custom Product: Rotobox Wheels are made to order with a 4-6 week production time. Please feel free to contact us for any questions.
Free Ground Shipping
Price: $2,922.00


Description: Rotobox RBX2 Symmetric Rear Wheel

ASSEMBLING COMPONENTS
Carbon fiber composite rim, a one-piece hollow carbon cast, reinforced with stainless steel wire and UV protected; 7075 T6 aluminium alloy hubs, spacers and sprocket carrier [only with rear symmetric wheel]. machined from solid and hard anodized; polyurethane cushion drive set; SKF bearings; aluminium valve stem.

PRODUCT QUALITY CONTROL
Your Rotobox wheel has its own Serial Number to track the production history. We confirm to have performed quality verification procedure of your Rotobox wheel.

SIZE
17" x 6.0"

WEIGHT
REAR WHEEL WEIGHT 4.11 kg / 9.06 LBS

MAX. STATIC LOAD
REAR 250 kg / 550 LBS

MAX. OPERATING TEMPERATURE
100 C / 212 F

MAX. PRESSURE
4 BAR / 58 PSI

The wheels conform to safety standard JASO T203-85 for JWL dotE Certification. Before riding on public streets, be sure to check your local regulations.
The complete set of RBX2 wheels, without brake rotors and sprocket, weighs:
6,65 kg (14.6 lbs) for Kawasaki ZX10R
6,61 kg (14.5 lbs) for Aprilia RSV4
6,90 kg (15.1 lbs) for BMW S1000RR
5,35 kg (11.6 lbs) for Ducati 1199 Panigale
Item #: RA70600511
Condition: New
Custom Product: Rotobox Wheels are made to order with a 4-6 week production time. Please feel free to contact us for any questions.
Free Ground Shipping
Price: $3,410.00


Description: Vesrah Brake Pads VD-9031 RJL
-Fits Brembo M4 & M50 Calipers
-The RJL Brake Pad compound is the perfect choice for Aggressive Street Riders, Track Day Riding and Novice Racers.
Item #: VD-9031RJL
Condition: New
On-hand inventory ships within 24 hours. When out of stock Please expect a 3 week ETA from manufacturer. Please note supply-chain related delays are possible.
Price: $86.10

Qty:

Description: =9031XX Will Fit OEM and most Brembo Calipers, Please Verify before ordering=
***Equivalent Brembo Racing Z04 Brake Pad : P/N: M497Z04***

*Sold per caliper

BREMBO CALIPERS:
Radial M4 100mm MonoBloc Caliper : P4 34
Brembo P/N: 220988530 / 220988531
Radial M4 108mm MonoBloc Caliper : P4 34
Brembo P/N: 220A39710 / 220A39711
Radial GP4 RC CNC Caliper
Brembo P/N: 220B01010 / 220B01011

for Brembo M4 M50 GP4RS GP4RX and .484 Cafe Calipers

Vesrah XX pads are the top of the line pad. MADE FOR RACING. They offer slightly less bite than the older RJL compound but greater braking power with a progressive feel. Small increases in lever force translate to exceptional increases in braking power. True one-finger braking with excellent feel and no fade. Your brakes will have the same feel and response from the first corner to the last.
Item #: VD-9031XX
Condition: New
Limited Supply: Only 4 Left!
On-hand inventory ships within 24 hours. When out of stock Please expect a 3 week ETA from manufacturer. Please note supply-chain related delays are possible.
Price: $117.60
Sale: $100.00
Save: 15%
Save: $17.60

Qty:

4sr diablo AR
Description:

Are you looking for a top-class racing suit to accommodate your standalone airbag vest? Then you’ve just found the best Airbag Ready® leathers on the market. Our latest specification Monster Green AR 1PC race suit comes with all the unique safety points you would expect from 4SR, but with our increased area of accordion stretch panel, this suit can now work safely in conjunction with any standalone airbag vest for racing.

Over the years we have been working with professional racers to develop the safest suits possible, this is our safest and most comfortable yet. Racing Diablo AR suit already comes with 18 ergonomically placed protectors and if you remove the 4SR Level 2 back and chest protectors, you can then wear your chosen airbag vest underneath. Easy and fast, you're now Airbag Ready!

Thanks to the unique cut and placement of accordion stretch panels, you can use several variants of standalone airbags available on the market. Our stitching and materials remain and will always remain 100% the same as our factory racers suits.

If you want to improve your motorcycle suit, leather jacket or trousers with leather logos, 4SR badging service is here for you!

The price includes knee and elbow sliders, internal protectors, removable chest and back protectors, double hip and coccyx protection and all from reputable brands. We have 18 ergonomically placed protectors, the most used in any mass-produced 1pc leather suit.

"WE MAKE OUR PRODUCTION SUITS IN THE SAME WAY WE PREPARE OUR FACTORY RACERS SUITS"

   We have also developed a simple and effective solution for holding up your leathers between track sessions, 4SR's Zipper Lock system will effectively hold the upper half of your suit out of the way.

The one-piece Racing Diablo AR Airbag Ready is also equipped with:

  • Hollow hump to fit your Hydroback
  • Seamless stretch in the crotch and armpit area for increased movement
  • Flexible, comfortable material used on the sleeve cuffs
  • Zipper lock to hold your leathers in between track sessions
  • Elbow down TECH elbow sliders. Available in several colours - White, Black, Red, Fluorescent Red, Fluorescent Yellow and Green.
 

Standard equipment of the Racing Diablo AR Airbag Ready® includes:

  • 1,2 mm thick cowhide / black, red, anthracite grey /
  • 4SR Elbow down TECH - replaceable elbow sliders
  • offset shoulders and pre-curved sleeves for the perfect riding position
  • high specification Betac shoulder, elbows and knees, certificated in accordance with EN
  • YKK & OPTI Zippers
  • maximum perforation on chest area, local perforation on arms, hips and thighs
  • 3D mesh lining
  • Aramid stretch panels for maximum mobility
  • flexible leather panels
  • hollow aerodynamic hump to fit 4SR Hydrobag
  • use of tripple seams & patented, double 4SR seam at more stressed points
  • soft strech sleeve cuffs
  • comfortable collar
  • reflective logo on collar
  • includes chest and back protectors (Both must be removed if using an Airbag system)
  • includes knee sliders
  • excludes Airbag system
  • AR suit is compatible with In&motion airbag systems, Alpinestars Tech-Air®
  • AR Airbag Ready® is a trademark registered in the Industrial Property Office of the Czech Republic

What does 4SR have and others don't?:

  • The suit is fully equipped with racing protectors, including chest and back protectors
  • Aramid stretch panel under the armpits and crotch is seamless
  • Inside the suit you will find a hidden pocket for a LapTimer
  • After closing the patent on the slider of the main zipper, the unzipped suit will not fall passed the butt 
  • Areas prone to abrasion are connected by a patented, double 4SR seam, which is sewn 4x!
  • 4SR suits have two layers of leather on the elbows, shoulders, hips and seating area
  • 4SR leather was tested by the TÜV Rheinland® certification center according to the EN 13595-2: 2002 standard, where it withstood 11.2s in the abrasion resistance test. We received the Level 2 safety label for our leather.
    Item #: 110111248
    Condition: New
    Ships within 24-48 hours and ships directly from our supplier. We will contact you if there is any delay or availability issues.
    Price: $1,299.00


    4SR Air Bag Ready Suit
    Description:
    Are you looking for a top-class racing suit to accommodate your standalone airbag vest? Then you’ve just found the best Airbag Ready® leathers on the market.

    Our latest specification AR Monster Green 1PC race suit comes with all the unique safety points you would expect from 4SR, but with our increased area of accordion stretch panel, this suit can now work safely in conjunction with any standalone airbag vest for racing.

    Over the years we have been working with professional racers to develop the safest suits possible, this is our safest and most comfortable yet. Racing Monster Green AR suit already comes with 18 ergonomically placed protectors and if you remove the 4SR Level 2 back and chest protectors, you can then wear your chosen airbag vest underneath. Easy and fast, you're now Airbag Ready!

    Thanks to the unique cut and placement of accordion stretch panels, you can use several variants of standalone airbags available on the market. Our stitching and materials remain and will always remain 100% the same as our factory racers suits.

    The price includes knee and elbow sliders, internal protectors, removable chest and back protectors, double hip and coccyx protection and all from reputable brands. We have 18 ergonomically placed protectors, the most used in any mass-produced 1pc leather suit.

    "WE MAKE OUR PRODUCTION SUITS IN THE SAME WAY WE PREPARE OUR FACTORY RACERS SUITS"
     

       We have also developed a simple and effective solution for holding up your leathers between track sessions, 4SR's Zipper Lock system will effectively hold the upper half of your suit out of the way.

    The one-piece Racing AR Monster Green Airbag Ready is also equipped with:

    • Hollow hump to fit your Camelbak rehydration pack
    • Seamless stretch in the crotch and armpit area for increased movement
    • Flexible, comfortable material used on the sleeve cuffs
    • Zipper lock to hold your leathers in between track sessions
    • Elbow down TECH elbow sliders. Available in several colours - Black, Red, Fluorescent Red, Fluorescent Yellow and Green.
       

    Standard equipment of the Racing Monster Green AR Airbag Ready® includes:

    • 1,2 mm thick cowhide / black, Fluorescent Yellow, Fluorescent Red /
    • 4SR Elbow down TECH - replaceable elbow sliders
    • Offset Shoulders and Pre-Curved Sleeves for the Perfect Riding Position
    • High Specification Betac Shoulder, Elbow and Knee Pads (Certified according to EN 1621-1: 2012)
    • YKK & OPTI Zippers
    • Maximum Perforation on chest area, local perforation on arms, hips and thighs
    • complete front perforation & local perforations underarm
    • 3D mesh lining
    • Kevlar stretch panels for maximum mobility
    • flexible leather panels
    • hollow aerodynamic hump to fit camelbak
    • use of double seams at more stressed points
    • soft kevlar sleeve cuffs
    • comfortable collar
    • reflective logo on collar
    • includes chest and spine protectors (Both must be removed if using an Airbag system)
    • includes knee sliders
    • excluding Airbag system
    • AR suit is compatible with In & motion airbag system, Alpinestars Tech-Air®,
    • AR Airbag Ready® is a trademark registered in the Industrial Property Office of the Czech Republic
    Item #: 11011658-58
    Condition: New
    Ships within 24-48 hours and ships directly from our supplier. We will contact you if there is any delay or availability issues.
    Price: $1,299.00


    Description: Replacement left side fairing with Dzus
    Item #: K18231AF
    Condition: New
    On-hand inventory ships within 24 hours. Avio Fiber has a typical eta of 4-6 weeks, Carbon Fiber can take up to 8 weeks due to production times. Please note supply-chain related delays are possible.
    Price: $205.36

    Qty:

    Description: Replacement lower fairing
    Item #: K18220AF
    Condition: New
    On-hand inventory ships within 24 hours. Avio Fiber has a typical eta of 4-6 weeks, Carbon Fiber can take up to 8 weeks due to production times. Please note supply-chain related delays are possible.
    Price: $165.35

    Qty:

    ZX10r Bodywork
    Description: • Upper Race Fairing (8 Dzus)
    • Lower Fairing
    • Left Side Panel (3 Dzus)
    • Right Side Panel (3 Dzus)
    • Single Race Seat (2 Pcs)

    Item #: K18100AF
    Condition: New
    On-hand inventory ships within 24 hours. Avio Fiber has a typical eta of 4-6 weeks, Carbon Fiber can take up to 8 weeks due to production times. Please note supply-chain related delays are possible.
    Price: $1,097.47


    Description: Replacement right side fairing with Dzus
    Item #: K18232AF
    Condition: New
    On-hand inventory ships within 24 hours. Avio Fiber has a typical eta of 4-6 weeks, Carbon Fiber can take up to 8 weeks due to production times. Please note supply-chain related delays are possible.
    Price: $205.36

    Qty:

    Description: Replacement upper fairing with Dzus
    Item #: K18210AF
    Condition: New
    Limited Supply: Only 2 Left!
    On-hand inventory ships within 24 hours. No Returns on Clearance items all sales are final
    Price: $372.05
    Sale: $199.00
    Save: 47%
    Save: $173.05


    Description: Replacement left side Fairing For Carbonin complete fairing, will not fit with other brands
    Item #: CK18231
    Condition: New
    On-hand inventory ships within 24 hours. Avio Fiber has a typical eta of 4-6 weeks, Carbon Fiber can take up to 8 weeks due to production times. Please note supply-chain related delays are possible.
    Price: $396.72

    Qty:

    Description: Replacement lower race Fairing For Carbonin complete fairing, will not fit with other brands
    Item #: CK18220
    Condition: New
    On-hand inventory ships within 24 hours. Avio Fiber has a typical eta of 4-6 weeks, Carbon Fiber can take up to 8 weeks due to production times. Please note supply-chain related delays are possible.
    Price: $356.04

    Qty:

    Description: Parts Included In Complete Race Fairing:
    • Upper Race Fairing (8 Dzus)
    • Lower Fairing
    • Left Side Panel (3 Dzus)
    • Right Side Panel (3 Dzus)
    • Single Race Seat (2 Pcs)
    There are 3 options for seats (not included in kit)

    Basic - This seat is a 15mm neoprene foam glued to a base that is molded from the seat pan of the tail section and then attaches to the seat pan with bolts. Please not that these seat's will only fit carbonin seat pans and seat units. It will not work on any other brand. This foam will wear out like any other foam pad.
    Standard - This is an upgrade to the basic seat which is covered in a neoprene material that protects the basic foam and provides the rider a level of grip but without compromising the need to slide side to side. It looks much more professional and will protect the basic foam from any wear from patches on leather suits or abuse from side to side movements. we have seen these seats go on for 3 seasons or more!
    Pro Seat - This seat is for riders or teams that require their seat to provide back support or a step seat to keep them in a position from sliding too far back in the seat under acceleration, this is often done with a raised section so they can still get back in the seat in the full tuck, they are just raised up more which helps keep the butt up and their head shoulders and chest lower in the tuck. It is the same material as the standard seat but can also be customized with team logo's or race number -If you purchase a pro seat we will contact you to design your seat. Please note pro seats are made custom to order
    Item #: CK18100
    Condition: New
    On-hand inventory ships within 24 hours. Avio Fiber has a typical eta of 4-6 weeks, Carbon Fiber can take up to 8 weeks due to production times. Please note supply-chain related delays are possible.
    Price: $2,242.95


    Description: Replacement right side Fairing For Carbonin complete fairing, will not fit with other brands
    Item #: CK18232
    Condition: New
    Carbon Fiber can take up to 8 weeks due to production times. Please note supply-chain related delays are possible.On-hand inventory ships within 24 hours.
    Price: $396.72

    Qty:

    Description: Replacement SBK Tail unit for carbonin bodywork
    Item #: CK18300
    Condition: New
    On-hand inventory ships within 24 hours. Avio Fiber has a typical eta of 4-6 weeks, Carbon Fiber can take up to 8 weeks due to production times. Please note supply-chain related delays are possible.
    Price: $656.08


    Description: Replacement Upper Fairing For Carbonin complete fairing, will not fit with other brands
    Item #: CK18210
    Condition: New
    On-hand inventory ships within 24 hours. Avio Fiber has a typical eta of 4-6 weeks, Carbon Fiber can take up to 8 weeks due to production times. Please note supply-chain related delays are possible.
    Price: $593.41


    Description: =9031SS Will Fit OEM and most Brembo Calipers, Please Verify before ordering=
    ***Equivalent Brembo Racing Z04 Brake Pad : P/N: M497Z04***

    *Sold per caliper

    BREMBO CALIPERS:
    Radial M4 100mm MonoBloc Caliper : P4 34
    Brembo P/N: 220988530 / 220988531
    Radial M4 108mm MonoBloc Caliper : P4 34
    Brembo P/N: 220A39710 / 220A39711
    Radial GP4 RC CNC Caliper
    Brembo P/N: 220B01010 / 220B01011

    Vesrah developed the new SS pad in conjunction with Ducati. This is the next evolution pad beyond the XX compound and is currently only available for the Brembo Monoblock calipers.

    -Has all the braking power of the XX pads with the harder initial bite of the SRJL pads.
    -Works great hot or cold, wet or dry.
    -All the outstanding qualities of the XX pad with even more improvements in wear and heat resistance.
    -Nobody else has a pad that comes close to the new Vesrah SS!
    Item #: VD-9031SS
    Condition: New
    On-hand inventory ships within 24 hours. When out of stock Please expect a 3 week ETA from manufacturer. Please note supply-chain related delays are possible.
    Price: $130.20

    Qty:

    Description: ZX10r front fender for racing
    Item #: K18010AF
    Condition: New
    Limited Supply: Only 2 Left!
    On-hand inventory ships within 24 hours. Avio Fiber has a typical eta of 4-6 weeks, Carbon Fiber can take up to 8 weeks due to production times. Please note supply-chain related delays are possible.
    Price: $126.68

    Qty:

    Description: Lightweight Carbon fender Oem Replacement
    Item #: CK18010
    Condition: New
    On-hand inventory ships within 24 hours. Avio Fiber has a typical eta of 4-6 weeks, Carbon Fiber can take up to 8 weeks due to production times. Please note supply-chain related delays are possible.
    Price: $236.03

    Qty:

    Description: Welcome to the latest development in superbike suspension, introducing the high side saving OVERSUSPENSION from Supreme Technology based in Italy. As seen on the WSBK Barni Racing Ducati V4!

    This new patented device is called "Oversuspension" - OverSuspension is a special resonator capable of removing the resonances of the rear swingarm group and giving the vehicle more stability, traction, braking and comfort, as well as facilitating the dynamic operation of the suspension, and greatly improving driving safety in every condition, for example reducing the possibility of highside on the track by up to 90%.
    Item #: OVS-STB/KawZX10R
    Condition: New
    On-hand inventory ships within 24 hours. When out of stock Please expect a 3 week ETA from manufacturer. Please note supply-chain related delays are possible.
    Price: $429.95

    Qty:

    Description: =9031ZZ Will Fit OEM and most Brembo Calipers, Please Verify before ordering=
    ***Equivalent Brembo Racing Z04 Brake Pad : P/N: M497Z04***

    *Sold per caliper

    BREMBO CALIPERS:
    Radial M4 100mm MonoBloc Caliper : P4 34
    Brembo P/N: 220988530 / 220988531
    Radial M4 108mm MonoBloc Caliper : P4 34
    Brembo P/N: 220A39710 / 220A39711
    Radial GP4 RC CNC Caliper
    Brembo P/N: 220B01010 / 220B01011

    The Vesrah ZZ Pad Compound is the newest evolution of the Vesrah Racing Brake Compounds. The ZZ Compound outperforms the XX Brake pad compound across all temperature ranges. The RJL-ZZ Brake Pad compound is perfect for the Racer and Aggressive street/ track rider alike looking for more performance across all temperature ranges from their brakes.
    Item #: VD-9031ZZ
    Condition: New
    On-hand inventory ships within 24 hours. When out of stock Please expect a 3 week ETA from manufacturer. Please note supply-chain related delays are possible.
    Price: $126.00

    Qty:

    Description: The Hand Rear Brake Master Cylinder HRMC Accossato For Motorcycles is in CNC-worked aluminium. The Piston Diameter is 13.5 mm. It is provided with standard length lever and special mounting bracket.
    Item #: MP004
    Condition: New
    Limited Supply: Only 1 Left!
    On-hand inventory ships within 24 hours. Please note supply-chain related delays are possible.
    Price: $733.80

    Qty:

    Description: The Accossato Rear Brake Master Cylinder For Motorcycles is in CNC-worked Aluminum with black superficial hard anodyzing treatment. The Piston Diameter is 10.5 mm
    Item #: MP001
    Condition: New
    Limited Supply: Only 1 Left!
    On-hand inventory ships within 24 hours. Please note supply-chain related delays are possible.
    Price: $462.53
    Sale: $393.15
    Save: 15%
    Save: $69.38

    Qty:

    Description: Kawasaki ZX10R Plug & Play cable for Solo 2 DL For models: Kawasaki Ninja ZX-10R MY2011 2011-2015 Kawasaki Ninja ZX-10R MY2011 Racing kit 2011-2015 Kawasaki Ninja ZX-10R MY2016 from 2016...
    Item #: X47KPFSOLO2KN
    Condition: New
    Aim Supply has been severely affected due to material shortages and most products are currently on a 3 month delivery date. Please send us an email request to find out ETAs.
    Price: $75.00

    Qty:

    Description: Quick Info
    Kawasaki ZX10R Plug
    Play Cable
    For SoloDL
    Product Details
    Kawasaki ZX10R Plug & Play Cable For SOLODL
    Item #: V02569220
    Condition: New
    Aim Supply has been severely affected due to material shortages and most products are currently on a 3 month delivery date. Please send us an email request to find out ETAs.
    Price: $73.00

    Qty:

    Description: Akrapovic Titanium Evolution system AK-S-K10E9-ZC, Kawasaki ZX-10R 2016-20, muffler with carbon sleeve, 4>2>1 full titanium system, lambda plug, hexagonal muffler with EU type approval, 350 mm length with db-killer (V-TUV050/3)
    Item #: S-K10E9-ZC
    Condition: New
    Ships within 24-48 hours and ships directly from our supplier. Please note supply-chain related delays are possible.
    Price: $2,508.00

    Qty:

    Description: Alpha Racing battery BMZ LiPo BMW S1000RR/HP4 2009-2018 |HP4 Race 2017-2018 | S1000R 2014 - 2019 | S1000XR 2015 - 2020 | 1199 Panigale 2012 - 2014 | 1299 Panigale 2015 - 2018 | 899 Panigale 2014 - 2015 | Ninja ZX-10R 2011 -2020 | MV Agusta F3 2012 - 2020 | YZF-R1/M 2015-2021 6121A000A00

    Racing battery BMZ LiPo, lithium-polymer battery 4.6 Ah
    Item #: 6121A000A00
    Condition: New
    On-hand inventory ships within 24 hours. We place weekly orders with Alpha, If we are out of stock on an item we can have it within 2 to 3 weeks Order now to insure you are allocated from the next shipment. Please note supply-chain related delays are possible.
    Price: $345.00

    Qty:

    Description: Alpha Racing Brake lever Racing blade long, for Brembo 19RCS BMW S1000RR/HP4 2009-2019,S1000R 2014-2016,S1000XR 2015-2016,M1000RR 2021- 3272A002A00

    Brake lever Racing blade long, for Brembo master cylinder 19RCS, black anodised, optional with remote adjuster available
    Item #: 3272A002A00
    Condition: New
    On-hand inventory ships within 24 hours. We place weekly orders with Alpha, If we are out of stock on an item we can have it within 2 to 3 weeks Order now to insure you are allocated from the next shipment. Please note supply-chain related delays are possible.
    Price: $57.86

    Qty:

    Description: Alpha Racing Brake reservoir kit for Brembo 19RCS 3272A016A00

    Brake reservoir kit for Brembo radial master cylinder 19RCS, reservoir with hose and bracket
    weight: 0,10 kg
    Item #: 3272A016A00
    Condition: New
    On-hand inventory ships within 24 hours. We place weekly orders with Alpha, If we are out of stock on an item we can have it within 2 to 3 weeks Order now to insure you are allocated from the next shipment. Please note supply-chain related delays are possible.
    Price: $66.24

    Qty:

    Description: Alpha Racing Brembo Racing brake caliper kit GP4-RX, 100 mm 3411A050B00

    Brembo Racing brake caliper kit GP4-RX 4-piston 32/32 (right/left), 2 pieces, fits BMW S 1000 RR OEM fork, 100 mm hole distance
    Item #: 3411A050B00
    Condition: New
    On-hand inventory ships within 24 hours. We place weekly orders with Alpha, If we are out of stock on an item we can have it within 2 to 3 weeks Order now to insure you are allocated from the next shipment. Please note supply-chain related delays are possible.
    Price: $2,070.19

    Qty:

    Description: Alpha Racing Steering shaft handle bar tool Kawasaki ZX-10R 2016- 8330A008A03

    Steering shaft D=15,8 mm for alpha Racing handle bar tool, for use at Kawasaki ZX-10R
    Item #: 8330A008A03
    Condition: New
    On-hand inventory ships within 24 hours. We place weekly orders with Alpha, If we are out of stock on an item we can have it within 2 to 3 weeks Order now to insure you are allocated from the next shipment. Please note supply-chain related delays are possible.
    Price: $32.47
    Qty:

    Description: Alpha Racing Stroke indicator front fork 43 mm Kawasaki ZX-10R 2011- | MV Agusta F3 675 2012-|Yamaha YZF-R1 2015 - 2016 3142A045A01

    Stroke indicator front fork 43 mm, including spring ring
    Item #: 3142A045A01
    Condition: New
    On-hand inventory ships within 24 hours. We place weekly orders with Alpha, If we are out of stock on an item we can have it within 2 to 3 weeks Order now to insure you are allocated from the next shipment. Please note supply-chain related delays are possible.
    Price: $25.39
    Qty:

    S1000RR Battery
    Description: Replace YTZ & YTX Models
    The lithium ATZ-10-RS is a direct replacement for these OEM battery sizes:

    YTZ10S
    YTZ12
    YTZ14

    YTX9
    YTX7A-BS
    YT12A-BS
    Item #: 213041
    Condition: New
    Limited Supply: Only 1 Left!
    Ships within 24-48 hours and ships directly from our supplier. Please note supply-chain related delays are possible.
    Price: $199.99

    Qty:

    Description: APX Racing Four (4) button Left handle bar race switch for Kawasaki ZX-10R 2016+ OEM wiring
    Part No: K1016L4MLE
    Made In USA

    ? Ideal for racing, to save space and weight where it matters.
    ? Switch is designed to navigate your dash menu functions while omitting all street options (horn, turn signals, head lights). Switch fits plug and play all latest generation 2016+ Kawasaki ZX-10R models equipped with oem ECU and wiring loom.
    ? Switch will work with KIT harness however the pit speed button will not be available.
    ? Main functions are KTRC (TRACTION CONTROL) INCREASE/DECREASE, MENU SELECT, UP/DWN, LAP.
    ? Designed and CNC machined in United States from aircraft grade aluminum to be the smallest and lightest on the market.
    ? Premium military spec buttons with gold plated contact surfaces, manufactured in United States by Otto engineering.
    ? It is recommended to pair this switch with a right hand 3 button switch part No:K1016R3EL
    ? This switch will save you twice the space on the clip on occupied by OEM switch.
    Item #: K1016L4MLE
    Condition: New
    Factory pre-order only for all APX Racing products have 1-to-2-week ETA for production from the manufacturer. Feel free to contact us if you have any questions.
    Price: $297.00

    Qty:

    Description: APEX RACING DEVELOPMENT FIVE BUTTON RACE SWITCH FOR KAWASAKI ZX-10R KIT ECU K1016KL5MELP
    Five (5) btton Left handle bar race switch for Kawasaki ZX-10R 2016+ KIT ECU
    Part No: K1016KL5MELP
    - Ideal for racing, to save space and weight where it matters.
    - Switch is designed to navigate your dash menu functions while omitting all street options (horn, turn signals, head lights). Switch fits plug and play all latest generation 2016+ Kawasaki ZX-10R models equipped with Race Kit ECU and wiring loom
    - Switch will work with OEM harness however the pit speed button will not be utilized.
    - Main functions are select, quick change menu navigation UP/DWN, pit speed limiter  and Lap.
    - Designed and CNC machined in United States from aircraft grade aluminum to be the smallest and lightest on the market.
    - Premium military spec buttons with gold plated contact surfaces, manufactured in United States by Otto engineering.
    - It is recommended to pair this switch with a right hand 3 button switch part No:K1016R3EL
    - This switch will save you twice the space on the clip on occupied by OEM switch. Not to mention that WSBK cockpit look !
    PRODUCT OPTION: YOU CAN OPT TO REPLACE THE L (LAP) BUTTON WITH A LATCHING BUTTON TO WIRE AND CONTROL YOUR RAIN LIGHT OR OTHER AUXILIARY FUNCTIONS. PLEASE SELECT THE APPROPRIATE OPTION. OTHERWISE PUT IT IN NOTES DURING CHECKOUT OR GIVE US A CALL
    NOTE: CLUTCH WIRE IS NOT INCLUDED. CAN BE SUPPLIED ON REQUEST AT A 10$ CHARGE. PART NUMBER CLW1. ENTER PART NUMBER IN THE PRODUCT SEARCH FILED AND ADD IT TO CART.
    Item #: K1016KL5MELP
    Condition: New
    Factory pre-order only for all APX Racing products have 1-to-2-week ETA for production from the manufacturer. Feel free to contact us if you have any questions.
    Price: $341.00


    Description: APEX RACING DEVELOPMENT FIVE BUTTON RACE SWITCH FOR KAWASAKI ZX-10R KIT ECU (RAIN LIGHT) K1016KL5MPL
    Five (5) Button Left handle bar race switch for Kawasaki ZX-10R 2016+ KIT ECU
    Part No: K1016KL5MPL
    - Ideal for racing, to save space and weight where it matters.
    - Switch is designed to navigate your dash menu functions while omitting all street options (horn, turn signals, head lights). Switch fits plug and play all latest generation 2016+ Kawasaki ZX-10R models equipped with Race Kit ECU and wiring loom
    - Switch will work with OEM harness however the pit speed button will not be utilized.
    - Main functions are select, quick change menu navigation UP/DWN, pit speed limiter  and Rain Light button (latching On/Off) 
    - Designed and CNC machined in United States from aircraft grade aluminum to be the smallest and lightest on the market.
    - Premium military spec buttons with gold plated contact surfaces, manufactured in United States by Otto engineering.
    - It is recommended to pair this switch with a right hand 3 button switch part No:K1016R3EL
    - This switch will save you twice the space on the clip on occupied by OEM switch. Not to mention that WSBK cockpit look !
    Item #: K1016KL5MPL
    Condition: New
    Factory pre-order only for all APX Racing products have 1-to-2-week ETA for production from the manufacturer. Feel free to contact us if you have any questions.
    Price: $341.00

    Qty:

    ZX10R,RR, Titanium, Arata, exhaust,
    Description: THIS PRODUCT DOES NOT MEET EMISSION COMPLIANCE REQUIREMENTS FOR STREET OR HIGHWAY USE.

    This product is legal in California only for racing vehicles which may never be used, registered or licensed for use upon a highway.
    Item #: G5ZX10ARD1
    Condition: New
    Price: $2,555.57

    Qty:

    Description: ATTACK PERFORMANCE FOOT PEG, PINCH -TYPE, SHORT 75MM (10MM SHORTER RACE OPTION), AERO HARD 90110124G
    ATTACK PERFORMANCE FOOT PEG, PINCH -TYPE, SHORT 75MM (10MM SHORTER RACE OPTION), AERO HARD 90110124G MADE IN USA At Attack Performance they have set up many championship winning chassis along with designing, manufacturing, and building our own MotoGP machine with their own parts. Attack Performance utilizes chassis simulation software to find critical dimensions such as Rake, Trail, Wheel Forces, and Linkage Ratios, just to name a few. Those tools combined with their decades of racing eliminates the guesswork from chassis setup.
    Item #: 90110124G
    Condition: New
    Ships within 24-48 hours and ships directly from our supplier. Please note supply-chain related delays are possible.
    Price: $54.50

    Qty:

    Description: ATTACK PERFORMANCE HANDLE BAR KIT, 50MM, BLACK 901108.50B
    MADE IN USA At Attack Performance they have set up many championship winning chassis along with designing, manufacturing, and building our own MotoGP machine with their own parts. Attack Performance utilizes chassis simulation software to find critical dimensions such as Rake, Trail, Wheel Forces, and Linkage Ratios, just to name a few. Those tools combined with their decades of racing eliminates the guesswork from chassis setup.
    Item #: 901108.50B
    Condition: New
    Ships within 24-48 hours and ships directly from our supplier. Please note supply-chain related delays are possible.
    Price: $275.00

    Qty:

    Description: ATTACK PERFORMANCE HANDLE BAR KIT, 50MM, BLACK (REPLACEMENT PARTS) 901108.50BE
    MADE IN USA At Attack Performance they have set up many championship winning chassis along with designing, manufacturing, and building our own MotoGP machine with their own parts. Attack Performance utilizes chassis simulation software to find critical dimensions such as Rake, Trail, Wheel Forces, and Linkage Ratios, just to name a few. Those tools combined with their decades of racing eliminates the guesswork from chassis setup.
    Item #: 901108.50BE
    Condition: New
    Ships within 24-48 hours and ships directly from our supplier. Please note supply-chain related delays are possible.

    R1 R6 R7 ZX6R ZX10R Clipons
    Description: ATTACK PERFORMANCE HANDLE BAR KIT, ZERO OFFSET, 50MM, BLACK 901131.50B
    MADE IN USA At Attack Performance they have set up many championship winning chassis along with designing, manufacturing, and building our own MotoGP machine with their own parts. Attack Performance utilizes chassis simulation software to find critical dimensions such as Rake, Trail, Wheel Forces, and Linkage Ratios, just to name a few. Those tools combined with their decades of racing eliminates the guesswork from chassis setup.
    Item #: 901131.50B
    Condition: New
    Ships within 24-48 hours and ships directly from our supplier. Please note supply-chain related delays are possible.
    Price: $295.00

    Qty:

    Description: ATTACK PERFORMANCE HANDLE BAR KIT, ZERO OFFSET, 50MM, BLACK (REPLACEMENT PARTS) 901131.50BE
    MADE IN USA At Attack Performance they have set up many championship winning chassis along with designing, manufacturing, and building our own MotoGP machine with their own parts. Attack Performance utilizes chassis simulation software to find critical dimensions such as Rake, Trail, Wheel Forces, and Linkage Ratios, just to name a few. Those tools combined with their decades of racing eliminates the guesswork from chassis setup.
    Item #: 901131.50BE
    Condition: New
    Ships within 24-48 hours and ships directly from our supplier. Please note supply-chain related delays are possible.

    Description: ATTACK PERFORMANCE REAR SET KIT, ZX10R, 16- , AERO HARD 325110G
    MADE IN USA At Attack Performance they have set up many championship winning chassis along with designing, manufacturing, and building our own MotoGP machine with their own parts. Attack Performance utilizes chassis simulation software to find critical dimensions such as Rake, Trail, Wheel Forces, and Linkage Ratios, just to name a few. Those tools combined with their decades of racing eliminates the guesswork from chassis setup.
    Item #: 325110G
    Condition: New
    Ships within 24-48 hours and ships directly from our supplier. Please note supply-chain related delays are possible.
    Price: $635.95

    Qty:

    Description: ATTACK PERFORMANCE REAR SET KIT, ZX10R, 16- , AERO HARD (REPLACEMENT PARTS) 325110GE
    MADE IN USA At Attack Performance they have set up many championship winning chassis along with designing, manufacturing, and building our own MotoGP machine with their own parts. Attack Performance utilizes chassis simulation software to find critical dimensions such as Rake, Trail, Wheel Forces, and Linkage Ratios, just to name a few. Those tools combined with their decades of racing eliminates the guesswork from chassis setup.
    Item #: 325110GE
    Condition: New
    Ships within 24-48 hours and ships directly from our supplier. Please note supply-chain related delays are possible.

    Description: ATTACK PERFORMANCE REAR SET KIT, ZX10R, 16- , BLACK 325110B
    MADE IN USA At Attack Performance they have set up many championship winning chassis along with designing, manufacturing, and building our own MotoGP machine with their own parts. Attack Performance utilizes chassis simulation software to find critical dimensions such as Rake, Trail, Wheel Forces, and Linkage Ratios, just to name a few. Those tools combined with their decades of racing eliminates the guesswork from chassis setup.
    Item #: 325110B
    Condition: New
    Ships within 24-48 hours and ships directly from our supplier. Please note supply-chain related delays are possible.
    Price: $635.95

    Qty:

    Description: ATTACK PERFORMANCE REAR SET KIT, ZX10R, 16- , BLACK (REPLACEMENT PARTS) 325110BE
    MADE IN USA At Attack Performance they have set up many championship winning chassis along with designing, manufacturing, and building our own MotoGP machine with their own parts. Attack Performance utilizes chassis simulation software to find critical dimensions such as Rake, Trail, Wheel Forces, and Linkage Ratios, just to name a few. Those tools combined with their decades of racing eliminates the guesswork from chassis setup.
    Item #: 325110BE
    Condition: New
    Ships within 24-48 hours and ships directly from our supplier. Please note supply-chain related delays are possible.

    Description: ATTACK PERFORMANCE TRIPLE CLAMP KIT, GP, ZX-10 16 - 325112
    MADE IN USA At Attack Performance they have set up many championship winning chassis along with designing, manufacturing, and building our own MotoGP machine with their own parts. Attack Performance utilizes chassis simulation software to find critical dimensions such as Rake, Trail, Wheel Forces, and Linkage Ratios, just to name a few. Those tools combined with their decades of racing eliminates the guesswork from chassis setup.
    Item #: 325112
    Condition: New
    Ships within 24-48 hours and ships directly from our supplier. Please note supply-chain related delays are possible.
    Price: $1,098.00

    Qty:

    Description: ATTACK PERFORMANCE TRIPLE CLAMP KIT, GP, ZX-10 16 - (REPLACEMENT PARTS) 325112E
    MADE IN USA At Attack Performance they have set up many championship winning chassis along with designing, manufacturing, and building our own MotoGP machine with their own parts. Attack Performance utilizes chassis simulation software to find critical dimensions such as Rake, Trail, Wheel Forces, and Linkage Ratios, just to name a few. Those tools combined with their decades of racing eliminates the guesswork from chassis setup.
    Item #: 325112E
    Condition: New
    Ships within 24-48 hours and ships directly from our supplier. Please note supply-chain related delays are possible.

    Description: ATTACK PERFORMANCE TRIPLE CLAMP KIT, GP, ZX-10 16-, BLACK 325112B
    MADE IN USA At Attack Performance they have set up many championship winning chassis along with designing, manufacturing, and building our own MotoGP machine with their own parts. Attack Performance utilizes chassis simulation software to find critical dimensions such as Rake, Trail, Wheel Forces, and Linkage Ratios, just to name a few. Those tools combined with their decades of racing eliminates the guesswork from chassis setup.
    Item #: 325112B
    Condition: New
    Ships within 24-48 hours and ships directly from our supplier. Please note supply-chain related delays are possible.
    Price: $1,173.00

    Qty:

    Description: ATTACK PERFORMANCE TRIPLE CLAMP KIT, GP, ZX-10 16-, BLACK (REPLACEMENT PARTS) 325112BE
    MADE IN USA At Attack Performance they have set up many championship winning chassis along with designing, manufacturing, and building our own MotoGP machine with their own parts. Attack Performance utilizes chassis simulation software to find critical dimensions such as Rake, Trail, Wheel Forces, and Linkage Ratios, just to name a few. Those tools combined with their decades of racing eliminates the guesswork from chassis setup.
    Item #: 325112BE
    Condition: New
    Ships within 24-48 hours and ships directly from our supplier. Please note supply-chain related delays are possible.

    Description: * Pricing is per caliper, dual disc applications must order two
    NOTE: We recommend replacing piston seals when installing the ventilated Caliper Racing Pistons
    Item #: BT-CRP-BK1
    Condition: New
    Ships within 24-48 hours and ships directly from our supplier. Please note supply-chain related delays are possible.
    Price: $190.00

    Qty:

    Description:
    Kawasaki ZX10RR, Floating, Black Carrier, Kawasaki


    Derived from the experience gained in SBK and MotoGP, the brand new T-Drive disc is the natural technical evolution of latest generation Brembo competition brake discs. The special shape of the 8 “T” pins on the disc and the eight shapes on the braking torque dragging system housing are the innovative element which strongly differentiates the new T-Drive from discs with cylindrical bushing systems. In fact, as a result of specific studies into process and machining tolerances, this unique configuration transfers braking torque more effectively, providing improved resistance to thermo-mechanical stress, especially in extreme conditions of use such as racing.
    The connection between housing and rotor is ensured by a special guillotine hooking system (patent pending) which allows both radial and axial floating and reduces the overall weight of the disc, resulting in a significant advantage in terms of rideability compared to the traditional bushing system. Both performance consistency and the efficiency of disc and brake pads coupling during the running-in period have been significantly improved thanks to a rotor - in steel identical to that used for the discs in SBK and MotoGP - characterised by a new differentiated diameter hole pattern. The rotor height has also been optimised: maintaining a thickness of 5.5 mm, the height could be reduced to the advantage of containing weight and the moment of inertia with the consequential benefit of improved vehicle handling.
    The housing is black anthracite anodised like latest generation racing discs. The Brembo logo is on the housing, machined from billet and painted in an unmistakeable red, yet another distinctive sign that characterises the racing image. All of the Brembo “T-Drive” discs can also boast the approval of the renowned TUV Certification Body which means they can be used on public roads in all countries that recognise this certification.
    The T-drive discs are available both with the same diameter as the original discs, to which they are totally interchangeable, as well as with greater diameter, for which the appropriate spacers must be purchased separately. For more information please contact your local dealer.

    Item #: 208C89061
    Condition: New
    Ships within 24-48 hours. Please note supply-chain related delays are possible. We will contact you with an ETA once your order has been processed
    Price: $844.10

    Qty:

    Description: Supersport discs, developed to provide the highest possible performance on the road and on the track, are available with a rotor measuring 34 mm in width and oversized to 5.5 mm in thickness, fully interchangeable with the original components without any modifications. These are fully floating discs consisting of a rotor in thermally treated steel (capable of resisting extreme thermo-mechanical stress) and a housing machined from billet aluminium alloy.
    In combination with Brembo Z04 brake pads these discs have won numerous SuperSport Championships, including the 2012, 2011 and 2009 editions. The complete range of Brembo SuperSport discs can also boast the approval of the renowned TUV Certification Body which means they can be used on public roads in all countries that recognise this certification.
    The Supersport discs are available both with the same diameter as the original discs, to which they are totally interchangeable, as well as with greater diameter, for which the appropriate spacers must be purchased separately. For more information please contact your local dealer.
    Item #: 08A64230
    Condition: New
    Ships within 24-48 hours. Please note supply-chain related delays are possible. We will contact you with an ETA once your order has been processed
    Price: $260.00

    Qty:

    Items 1-60 of 162

    View Universal items for: 2017, Kawasaki, Ninja ZX-10R