- Home »
- Catalog
HHR Performance » 2016, Aprilia, RSV4/RF
Products for:
- Year: 2016
- Make: Aprilia
- Model: RSV4/RF
View Universal items for: 2016 Aprilia RSV4/RF
Browse Products
Items 1-60 of 112
- Page 1 of 2
- Next
Description:
Note: (Springs Sold Separately Use Springs Series 08790-)
NIX 30 Cartridge Kit FGK 215
Our 30 mm front fork cartridge kit is based on experience gained from international Supersport and Superstock championships. It doesn’t matter if you are heading for a national road racing title or if you are taking your bike to the local race track. The cartridge kit will give you loads of performance, stable damping characteristics and fantastic comfort.
The kit has a unique design with compression damping and the adjustment on the left leg and rebound damping
and the adjustment on the right leg – i.e. all adjustments are made at the top together with the spring preload!
The cartridge kit system fits bolt on in most standard hyper sport front forks.
Part number
FGK 215
Type Code
30mm Cartridge Kit R&T
Technical data
| Stroke: | 120 mm |
|---|---|
| Position: | front |
| Spring series: | 08790-Serie |
Notes
Öhlins Front Fork. It is recommended to contact an authorised ÖHLINS Service Center for installation.
Fits for vehicles
Aprilia RSV4 Factory (2010 – 2016)
- ABE (Germany)
Download
- Mounting Instructions FGK 215 English (1.387,2 KB)
- Owner´s Manual Öhlins Motorcycle 30mm Cartridge Kit (English) (1.996,0 KB)
- Mounting Instructions FGK 215 German (1.294,8 KB)
- Owner´s Manual Öhlins Motorcycle 30mm Cartridge Kit (German) (2.541,2 KB)
Item #: FGK 215
Condition:
New
Please feel free to call us for ETA if no inventory is listed above.
Price: $1,150.00
Description:
Rotobox BOOST Front Wheel
The new and improved model BOOST carbon fiber wheel from Rotobox, decreasing the weight from the RBX2 with improved design and higher performance! Comes in gloss and matte finish, in both symmetric and convex designs.
Like the RBX2, the BOOST is produced using Rotobox's unique 3-component composite - combining carbon, epoxy and stainless steel. By integrating the stainless 2,5 mm steel wire in each side of the rim, we increase its impact resistance at the most critical outer part. JWL and DOT approved, having met JASO T203-85 safety standards.
Another hidden BOOST gem - the Structural Rib. Thanks to the High Pressure Core Technology the structural rib is placed in the inner side between the spokes, with its mission to support the stress hot spot of the wheel. As a result the BOOST elegant spoke design brings greater stiffness and although the spokes are thinner the BOOST is stronger than ever - with a permissible static load of 280 kg on the rear and 180kg on the front wheel.
ASSEMBLING COMPONENTS
Carbon fiber composite rim, a one-piece hollow carbon cast, reinforced with stainless steel wire and UV protected; 7075 T6 aluminum alloy hubs, spacers and sprocket carrier [only with rear symmetric wheel]. machined from solid and hard anodized; polyurethane cushion drive set; SKF bearings; aluminum valve stem.
PRODUCT QUALITY CONTROL
Your Rotobox wheel has its own Serial Number to track the production history. We confirm to have performed quality verification procedure of your Rotobox wheel.
SIZE
17" x 3.5"
WEIGHT
REAR WHEEL WEIGHT 2.58 kg / 5.68 LBS
MAX. STATIC LOAD
REAR 180 kg / 400 LBS
MAX. OPERATING TEMPERATURE
100 C / 212 F
MAX. PRESSURE
4 BAR / 58 PSI
The wheels conform to safety standard JASO T203-85 for JWL dotE Certification. Before riding on public streets, be sure to check your local regulations.
Rotobox Boost Wheel set Weight example:
Stock S1000RR 11.70kg (25.79 lbs)
Rotobox Boost 6.69kg (14.74 lbs)
Weight saving more than 5.00kg of rotating mass. Incredible!
The new and improved model BOOST carbon fiber wheel from Rotobox, decreasing the weight from the RBX2 with improved design and higher performance! Comes in gloss and matte finish, in both symmetric and convex designs.
Like the RBX2, the BOOST is produced using Rotobox's unique 3-component composite - combining carbon, epoxy and stainless steel. By integrating the stainless 2,5 mm steel wire in each side of the rim, we increase its impact resistance at the most critical outer part. JWL and DOT approved, having met JASO T203-85 safety standards.
Another hidden BOOST gem - the Structural Rib. Thanks to the High Pressure Core Technology the structural rib is placed in the inner side between the spokes, with its mission to support the stress hot spot of the wheel. As a result the BOOST elegant spoke design brings greater stiffness and although the spokes are thinner the BOOST is stronger than ever - with a permissible static load of 280 kg on the rear and 180kg on the front wheel.
ASSEMBLING COMPONENTS
Carbon fiber composite rim, a one-piece hollow carbon cast, reinforced with stainless steel wire and UV protected; 7075 T6 aluminum alloy hubs, spacers and sprocket carrier [only with rear symmetric wheel]. machined from solid and hard anodized; polyurethane cushion drive set; SKF bearings; aluminum valve stem.
PRODUCT QUALITY CONTROL
Your Rotobox wheel has its own Serial Number to track the production history. We confirm to have performed quality verification procedure of your Rotobox wheel.
SIZE
17" x 3.5"
WEIGHT
REAR WHEEL WEIGHT 2.58 kg / 5.68 LBS
MAX. STATIC LOAD
REAR 180 kg / 400 LBS
MAX. OPERATING TEMPERATURE
100 C / 212 F
MAX. PRESSURE
4 BAR / 58 PSI
The wheels conform to safety standard JASO T203-85 for JWL dotE Certification. Before riding on public streets, be sure to check your local regulations.
Rotobox Boost Wheel set Weight example:
Stock S1000RR 11.70kg (25.79 lbs)
Rotobox Boost 6.69kg (14.74 lbs)
Weight saving more than 5.00kg of rotating mass. Incredible!
Item #: FA70350311
Condition:
New
FREE SHIPPING! Factory Pre Order Only for all Rotobox wheels with up to an 8 Week ETA for production. Please feel free to call us for ETA if no inventory is listed
above.
Free Ground Shipping
Price: $1,545.00
Description:
TTX GP Shock Absorber AP 466
Based on your bike’s performance, its price and available mounting space we have designed a shock that we think suits it, both when it comes to price and performance.
We start by choosing a type which we tailor-make for your specific bike. The basic setup, the design of the shim stacks and the calibration of the adjusters, is tested both on road and track. They are the results of true tests with your bike and no guesswork!
Öhlins manufactures more than 300 different shock absorber models, each model is tailor-made for one specific bike. The concept of all Öhlins products is not a secret, it is precision. Precision provides superior control of the damping force and the key to our success.
Part number
AP 466
Type Code
T36PR1C1LB
T
Twin tube
36
Piston diameter: 36 mm
P
Monotube high pressure gas type of shock absorber with external “piggy back” reservoir.
R1
Adjustable rebound damping. Black adjuster on TTX36 shocks / silver adjuster on TTX GP shocks.
C1
Adjustable compression damping. Gold adjuster on TTX36 / TTX GP shocks.
B
Integrated hydraulic spring preload adjuster. Adjuster wheel or hexagon on the adjuster.
Technical data
| Length: | 310 +6/-0 mm |
|---|---|
| Stroke: | 67 mm |
| Rate N/mm: | 95 N/mm |
| Position: | rear |
| Mounted spring: | 21040-31 |
| Packaging unit: | pieces |
Fits for vehicles
Aprilia RSV4 (2009 – 2012)
- ABE (Germany)
Aprilia RSV4 (2013 – 2016)
- "ABE" in preparation (Germany)
Aprilia RSV4 Factory (2009 – 2016)
- ABE (Germany)
Aprilia RSV4 R (2013 – 2016)
- ABE (Germany)
Download
- Mounting Instruction Öhlins Motorcycle AP 466 (English) (313,0 KB)
- Owner´s Manual Öhlins Motorcycle TTX GP shock absorber Road Track (English) (1.970,2 KB)
- Mounting Instruction Öhlins Motorcycle AP 466 (German) (301,8 KB)
- Owner´s Manual Öhlins Motorcycle TTX GP shock absorber Road Track (German) (3.112,6 KB)
Item #: AP 466
Condition:
New
Please feel free to call us for ETA if no inventory is listed above.
Price: $1,400.00
Description:
Vesrah Brake Pads VD-9031 RJL
-Fits Brembo M4 & M50 Calipers
-The RJL Brake Pad compound is the perfect choice for Aggressive Street Riders, Track Day Riding and Novice Racers.
-Fits Brembo M4 & M50 Calipers
-The RJL Brake Pad compound is the perfect choice for Aggressive Street Riders, Track Day Riding and Novice Racers.
Item #: VD-9031RJL
Condition:
New
Limited Supply: Only 4 Left!
Delivery times for Vesrah products can vary from 3-4 weeks if not in stock. Please feel free to call us for ETA if no inventory is listed above.
Price: $82.00
Description:
Description
Parts Included In Complete Race Fairing:
• Upper Race Fairing (6 Dzus)
• Lower Fairing
• Left Side Panel (2 Dzus)
• Right Side Panel (2 Dzus)
• Single Race Seat (2 Pcs)
Basic - This seat is a 15mm neoprene foam glued to a base that is molded from the seat pan of the tail section and then attaches to the seat pan with bolts. Please not that these seat's will only fit carbonin seat pans and seat units. It will not work on any other brand. This foam will wear out like any other foam pad.
Standard - This is an upgrade to the basic seat which is covered in a neoprene material that protects the basic foam and provides the rider a level of grip but without compromising the need to slide side to side. It looks much more professional and will protect the basic foam from any wear from patches on leather suits or abuse from side to side movements. we have seen these seats go on for 3 seasons or more!
Pro Seat - This seat is for riders or teams that require their seat to provide back support or a step seat to keep them in a position from sliding too far back in the seat under acceleration, this is often done with a raised section so they can still get back in the seat in the full tuck, they are just raised up more which helps keep the butt up and their head shoulders and chest lower in the tuck. It is the same material as the standard seat but can also be customized with team logo's or race number -If you purchase a pro seat we will contact you to design your seat. Please note pro seats are made custom to order
Avio fiber replacement panel , reinforced with carbon fiber and comes with pre-installed dzus for perfect fitment. Finished in a white gelcoat.
Parts Included In Complete Race Fairing:
• Upper Race Fairing (6 Dzus)
• Lower Fairing
• Left Side Panel (2 Dzus)
• Right Side Panel (2 Dzus)
• Single Race Seat (2 Pcs)
Basic - This seat is a 15mm neoprene foam glued to a base that is molded from the seat pan of the tail section and then attaches to the seat pan with bolts. Please not that these seat's will only fit carbonin seat pans and seat units. It will not work on any other brand. This foam will wear out like any other foam pad.
Standard - This is an upgrade to the basic seat which is covered in a neoprene material that protects the basic foam and provides the rider a level of grip but without compromising the need to slide side to side. It looks much more professional and will protect the basic foam from any wear from patches on leather suits or abuse from side to side movements. we have seen these seats go on for 3 seasons or more!
Pro Seat - This seat is for riders or teams that require their seat to provide back support or a step seat to keep them in a position from sliding too far back in the seat under acceleration, this is often done with a raised section so they can still get back in the seat in the full tuck, they are just raised up more which helps keep the butt up and their head shoulders and chest lower in the tuck. It is the same material as the standard seat but can also be customized with team logo's or race number -If you purchase a pro seat we will contact you to design your seat. Please note pro seats are made custom to order
Avio fiber replacement panel , reinforced with carbon fiber and comes with pre-installed dzus for perfect fitment. Finished in a white gelcoat.
Item #: A5100AF
Condition:
New
These are not designed to fit with any of the OEM panels. Delivery times for Carbonin products can vary from 3-4 weeks if not in stock. Please feel free to call us for ETA if no inventory is listed above.
Price: $938.53
Description:
Parts Included In Complete Race Fairing:
Upper Race Fairing (6 Dzus)
Lower Fairing
Left Side Panel (2 Dzus)
Right Side Panel (2 Dzus)
Single Race Seat (2 Pcs) There are 3 options for seats
• Basic - This seat is a 15mm neoprene foam glued to a base that is molded from the seat pan of the tail section and then attaches to the seat pan with bolts. Please not that these seat's will only fit carbonin seat pans and seat units. It will not work on any other brand. This foam will wear out like any other foam pad.
• Standard - This is an upgrade to the basic seat which is covered in a neoprene material that protects the basic foam and provides the rider a level of grip but without compromising the need to slide side to side. It looks much more professional and will protect the basic foam from any wear from patches on leather suits or abuse from side to side movements. we have seen these seats go on for 3 seasons or more!
• Pro Seat - This seat is for riders or teams that require their seat to provide back support or a step seat to keep them in a position from sliding too far back in the seat under acceleration, this is often done with a raised section so they can still get back in the seat in the full tuck, they are just raised up more which helps keep the butt up and their head shoulders and chest lower in the tuck. It is the same material as the standard seat but can also be customized with team logo's or race number -If you purchase a pro seat we will contact you to design your seat. Please note pro seats are made custom to order
Upper Race Fairing (6 Dzus)
Lower Fairing
Left Side Panel (2 Dzus)
Right Side Panel (2 Dzus)
Single Race Seat (2 Pcs) There are 3 options for seats
• Basic - This seat is a 15mm neoprene foam glued to a base that is molded from the seat pan of the tail section and then attaches to the seat pan with bolts. Please not that these seat's will only fit carbonin seat pans and seat units. It will not work on any other brand. This foam will wear out like any other foam pad.
• Standard - This is an upgrade to the basic seat which is covered in a neoprene material that protects the basic foam and provides the rider a level of grip but without compromising the need to slide side to side. It looks much more professional and will protect the basic foam from any wear from patches on leather suits or abuse from side to side movements. we have seen these seats go on for 3 seasons or more!
• Pro Seat - This seat is for riders or teams that require their seat to provide back support or a step seat to keep them in a position from sliding too far back in the seat under acceleration, this is often done with a raised section so they can still get back in the seat in the full tuck, they are just raised up more which helps keep the butt up and their head shoulders and chest lower in the tuck. It is the same material as the standard seat but can also be customized with team logo's or race number -If you purchase a pro seat we will contact you to design your seat. Please note pro seats are made custom to order
Item #: CA5200
Condition:
New
These are not designed to fit with any of the OEM panels. Delivery times for Carbonin products can vary from 3-4 weeks if not in stock. Please feel free to call us for ETA if no inventory is listed above.
Price: $1,967.23
Description:
=9031ZZ Will Fit OEM and most Brembo Calipers, Please Verify before ordering=
***Equivalent Brembo Racing Z04 Brake Pad : P/N: M497Z04***
*Sold per caliper
BREMBO CALIPERS:
Radial M4 100mm MonoBloc Caliper : P4 34
Brembo P/N: 220988530 / 220988531
Radial M4 108mm MonoBloc Caliper : P4 34
Brembo P/N: 220A39710 / 220A39711
Radial GP4 RC CNC Caliper
Brembo P/N: 220B01010 / 220B01011
The Vesrah ZZ Pad Compound is the newest evolution of the Vesrah Racing Brake Compounds. The ZZ Compound outperforms the XX Brake pad compound across all temperature ranges. The RJL-ZZ Brake Pad compound is perfect for the Racer and Aggressive street/ track rider alike looking for more performance across all temperature ranges from their brakes.
***Equivalent Brembo Racing Z04 Brake Pad : P/N: M497Z04***
*Sold per caliper
BREMBO CALIPERS:
Radial M4 100mm MonoBloc Caliper : P4 34
Brembo P/N: 220988530 / 220988531
Radial M4 108mm MonoBloc Caliper : P4 34
Brembo P/N: 220A39710 / 220A39711
Radial GP4 RC CNC Caliper
Brembo P/N: 220B01010 / 220B01011
The Vesrah ZZ Pad Compound is the newest evolution of the Vesrah Racing Brake Compounds. The ZZ Compound outperforms the XX Brake pad compound across all temperature ranges. The RJL-ZZ Brake Pad compound is perfect for the Racer and Aggressive street/ track rider alike looking for more performance across all temperature ranges from their brakes.
Item #: VD-9031ZZ
Condition:
New
Delivery times for Vesrah products can vary from 3-4 weeks if not in stock. Please feel free to call us for ETA if no inventory is listed above.
Price: $120.00
Description:
Accossato Adjustable Racing Street Rearsets made in Aluminum. Compatible with specific motorcycle applications offering a rearward position compared to the original one..
Item #: FT002
Condition:
New
Delivery times for Accossato products can vary from 3-4 weeks if not in stock. Please feel free to call us for ETA if no inventory is listed above.
Price: $349.80
Description:
Accossato Brake Pad AGPA177 (dimensions 85x50.8x8). Brake pads kit available in SINTERED compound. 2 pads included in the box.
Item #: AGPA177
Condition:
New
Delivery times for Accossato products can vary from 3-4 weeks if
not in stock. Please feel free to call us for ETA if no
inventory is listed above.
Price: $44.00
Description:
Accossato Brake Pad AGPA186 (dimensions 102.2x41.9x8.1). Brake pads kit available in two compounds: SINTERED or ZXC. 2 pads included in the box.
Item #: AGPA186
Condition:
New
Delivery times for Accossato products can vary from 3-4 weeks if
not in stock. Please feel free to call us for ETA if no
inventory is listed above.
Price: $46.20
Description:
Accossato fixed brake lever Made in CNC-worked alluminium. Available options: short and long. Anodyzed in 7 different colours. Compatible with applications of specific motorcycles.
Item #: EDF011
Condition:
New
Delivery times for Accossato products can vary from 3-4 weeks if
not in stock. Please feel free to call us for ETA if no
inventory is listed above.
Price: $84.70
Description:
Accossato fixed clutch lever Made in CNC-worked alluminium. Available options: short and long. Anodyzed in 7 different colours. Compatible with applications of specific motorcycles.
Item #: ESV004
Condition:
New
Delivery times for Accossato products can vary from 3-4 weeks if
not in stock. Please feel free to call us for ETA if no
inventory is listed above.
Price: $84.70
Description:
Accossato Fork Preload Steering Nut Made in CNC-worked Aluminum and anodyzed. Available in 7 different colours. The internal hexagon is 17 mm. The ring is Compatible with applications of specific motorcycles and can fit all the nuts - they are the same size.
Item #: AD017
Condition:
New
Delivery times for Accossato products can vary from 3-4 weeks if
not in stock. Please feel free to call us for ETA if no
inventory is listed above.
Price: $34.10
Description:
Accossato Fork Preload Steering Nut Made in CNC-worked Aluminum and anodyzed. Available in 7 different colours. The internal hexagon is 22 mm. The ring is Compatible with applications of specific motorcycles and can fit all the nuts - they are the same size.
Item #: AD022
Condition:
New
Delivery times for Accossato products can vary from 3-4 weeks if
not in stock. Please feel free to call us for ETA if no
inventory is listed above.
Price: $34.10
Description:
Accossato cap Compatible with the front brake fluid reservoir - check the specific applications for motorcycles. It is made in Aluminum Coloured CNC-worked and anodyzed.
Item #: TS003
Condition:
New
Delivery times for Accossato products can vary from 3-4 weeks if
not in stock. Please feel free to call us for ETA if no
inventory is listed above.
Price: $30.80
Description:
Accossato Front Fork Protection for Motorcycles - Made in Aluminum and plastic material. The kit includes: spacers screws and all the parts needed for mounting.
Item #: PF031N
Condition:
New
Delivery times for Accossato products can vary from 3-4 weeks if
not in stock. Please feel free to call us for ETA if no
inventory is listed above.
Price: $42.90
Description:
Accossato fuel-caps with quick action system made in CNC-worked Aluminum. The closing cap is also available separately - many colours available.
Item #: FC002
Condition:
New
Delivery times for Accossato products can vary from 3-4 weeks if
not in stock. Please feel free to call us for ETA if no
inventory is listed above.
Price: $127.60
Description:
The Hand Rear Brake Master Cylinder HRMC Accossato For Motorcycles is in CNC-worked aluminium. The Piston Diameter is 13.5 mm. It is provided with standard length lever and special mounting bracket.
Item #: MP004
Condition:
New
Delivery times for Accossato products can vary from 3-4 weeks if not in stock. Please feel free to call us for ETA if no inventory is listed
above.
Price: $733.80
Description:
Accossato Mirror Covers CNC-worked and anodyzed Aluminum - many colours available. Sold in pairs Compatible with specific motorcycle applications.
Item #: MC001
Condition:
New
Delivery times for Accossato products can vary from 3-4 weeks
if not in stock. Please feel free to call us for ETA if no
inventory is listed above.
Price: $34.10
Description:
Accossato Mirror Covers CNC-worked and anodyzed Aluminum - many colours available. Sold in pairs Compatible with specific motorcycle applications.
Item #: MC004
Condition:
New
Delivery times for Accossato products can vary from 3-4 weeks
if not in stock. Please feel free to call us for ETA if no
inventory is listed above.
Price: $34.10
Description:
Accossato Oil Filler Cap made in Aluminum CNC-worked e anodyzed in 7 different colours. It is Compatible with motorcycle appliations and adaptable on other motorcycles with a cap size of: M25X15
Item #: FP009
Condition:
New
Delivery times for Accossato products can vary from 3-4 weeks
if not in stock. Please feel free to call us for ETA if no
inventory is listed above.
Price: $19.80
Description:
The Accossato Rear Brake Master Cylinder For Motorcycles is in CNC-worked Aluminum with black superficial hard anodyzing treatment. The Piston Diameter is 10.5 mm
Item #: MP001
Condition:
New
Limited Supply: Only 2 Left!
Delivery times for Accossato products can vary from 3-4 weeks if not in stock. Please feel free to call us for ETA if no inventory is
listed above.
Price: $462.53
Description:
The Accossato Rear Brake Master Cylinder For Motorcycles is in CNC-worked aluminum with black superficial hard anodizing treatment. The Piston Diameter is 13.5 mm
Item #: MP003
Condition:
New
Delivery times for Accossato products can vary from 3-4 weeks if not in stock. Please feel free to call us for ETA if no inventory is listed
above.
Price: $500.81
Description:
The Accossato double-ended rear brake master cylinder for motorcycles is in CNC-worked aluminium with black superficial hard anodyzing treatment. The piston diameter is 13.5 mm. The double-ended brake master cylinder allows it to be mounted in conjunction with a rear handlebar pump while maintaining the use of the pedal brake.
Item #: MP005
Condition:
New
Delivery times for Accossato products can vary from 3-4 weeks if not in stock. Please feel free to call us for ETA if no inventory is listed
above.
Price: $527.49
Description:
Accossato Stand supports made in Aluminum and available in 7 different colurs with rubber protection - thread pitch: M6 - Compatible with many motorcycle applications
Item #: ST006
Condition:
New
Delivery times for Accossato products can vary from 3-4 weeks if not in stock. Please feel free to call us for ETA if no inventory is listed above.
Price: $40.70
Description:
Accossato Stand supports made in Aluminum and available in 7 different colurs withouth rubber protection - thread pitch: M6 - Compatible with many motorcycle applications.
Item #: ST001
Condition:
New
Delivery times for Accossato products can vary from 3-4 weeks if not in stock. Please feel free to call us for ETA if no inventory is listed above.
Price: $28.60
Description:
AiM SOLO 2 DL Aprilia RSV4 / Tuono Bracket Mounting Kit X46KSARSV40
For these Aprilia models:
RSV4 RR/RF from 2017
RSV4 1100 from 2019
Tuono V4 RR/Factory from 2017
For these Aprilia models:
RSV4 RR/RF from 2017
RSV4 1100 from 2019
Tuono V4 RR/Factory from 2017
Item #: X46KSARSV40
Condition:
New
Delivery times for AiM products can vary from 2-3 weeks if not in stock. Please feel free to call us for ETA if no inventory is listed above.
Price: $98.00
Description:
AiM SOLO 2 DL Aprilia RSV4 / Tuono V4 ECU interface harness
For these Aprilia models:
RSV4 RR/RF from 2017
RSV4 1100 from 2019
Tuono V4 RR/Factory from 2017
For these Aprilia models:
RSV4 RR/RF from 2017
RSV4 1100 from 2019
Tuono V4 RR/Factory from 2017
Item #: V02589090
Condition:
New
Delivery times for AiM products can vary from 2-3 weeks if not in stock. Please feel free to call us for ETA if no inventory is listed above.
Price: $115.00
Description:
Replace YTZ & YTX Models
The lithium ATZ-10-RS is a direct replacement for these OEM battery sizes:
YTZ10S
YTZ12
YTZ14
YTX9
YTX7A-BS
YT12A-BS
The lithium ATZ-10-RS is a direct replacement for these OEM battery sizes:
YTZ10S
YTZ12
YTZ14
YTX9
YTX7A-BS
YT12A-BS
Item #: 213041
Condition:
New
Please feel free to call us for ETA if no inventory is listed above.
Price: $199.99
Description:
APEX RACING DEVELOPMENT TWO BUTTON ENGINE RACE SWITCH FOR APRILIA RSV4, TUONO (ALL YEARS)
APRD-TBERSFART
The switch is a direct plug and play replacement for OEM egnition switch for all Aprilia RSV4 and Tuono models (all years 2004-2018)
Ideal for racing and street application, to save space and weight where it matters.
Designed for 22 mm standard clip on handle bars.
Switch functions: engine run/stop (maintained red) and starter activation (momentary black.
? Designed and CNC machined in United States from aircraft grade aluminum to be the smallest and lightest on the market.
Premium, military grade buttons with gold plated contact surfaces, manufactured in United States by Otto.
Switch functions: engine run/stop (maintained red) and starter activation (momentary black.
Plug and play with OEM connector.
Ideal for racing and street application, to save space and weight where it matters.
Designed for 22 mm standard clip on handle bars.
Switch functions: engine run/stop (maintained red) and starter activation (momentary black.
? Designed and CNC machined in United States from aircraft grade aluminum to be the smallest and lightest on the market.
Premium, military grade buttons with gold plated contact surfaces, manufactured in United States by Otto.
Switch functions: engine run/stop (maintained red) and starter activation (momentary black.
Plug and play with OEM connector.
Item #: TBERSFART
Condition:
New
Delivery times for APX Racing products can vary from 1-2 weeks if not in stock. Please feel free to call us for ETA if no inventory is listed above.
Price: $205.00
Description:
APEX RACING DEVELOPMENT TWO BUTTON ENGINE RACE SWITCH FOR APRILIA RSV4, TUONO (ALL YEARS)
TBERSFA-RSV4
TBERSFA-RSV4
Item #: TBERSFA-RSV4
Condition:
New
Delivery times for APX Racing products can vary from 1-2 weeks if not in stock. Please feel free to call us for ETA if no inventory is listed above.
Price: $205.00
Description:
APEX RACING DEVELOPMENT TWO BUTTON ENGINE RACE SWITCH FOR APRILIA RSV4, TUONO (ALL YEARS) (BREMBO MOUNT INLINE)
APRD-TBERSFARTBMI
APRD-TBERSFARTBMI
The switch is a direct plug and play replacement for OEM ignition switch for all Aprilia RSV4 and Tuono models (all years 2004-2018)
Ideal for racing and street application, to save space and weight where it matters. This model takes weight savings to another level - only 40 grams!!! Switch is acting as a back mounting bracket for your front brake master cylinder.
Fits OEM and Brembo RCS master cylinders. Note!!! - Inline fasteners bore.
Designed for 22 mm standard clip on handle bars.
Switch functions: engine run/stop (maintained red) and starter activation (momentary black.
Designed and CNC machined in United States from aircraft grade aluminum to be the smallest and lightest on the market.
Premium, military grade buttons with gold plated contact surfaces, manufactured in United States by Otto.
Switch functions: engine run/stop (maintained red) and starter activation (momentary black.
Plug and play with OEM connector.
Ideal for racing and street application, to save space and weight where it matters. This model takes weight savings to another level - only 40 grams!!! Switch is acting as a back mounting bracket for your front brake master cylinder.
Fits OEM and Brembo RCS master cylinders. Note!!! - Inline fasteners bore.
Designed for 22 mm standard clip on handle bars.
Switch functions: engine run/stop (maintained red) and starter activation (momentary black.
Designed and CNC machined in United States from aircraft grade aluminum to be the smallest and lightest on the market.
Premium, military grade buttons with gold plated contact surfaces, manufactured in United States by Otto.
Switch functions: engine run/stop (maintained red) and starter activation (momentary black.
Plug and play with OEM connector.
Item #: TBERSFARTBMI
Condition:
New
Delivery times for APX Racing products can vary from 1-2 weeks if not in stock. Please feel free to call us for ETA if no inventory is listed above.
Price: $205.00
Description:
APEX RACING DEVELOPMENT TWO BUTTON ENGINE RACE SWITCH FOR APRILIA RSV4, TUONO (ALL YEARS) (BREMBO MOUNT INLINE)
TBERSFA-RSV4-BMI
- The switch is a direct plug and play replacement for OEM ignition switch for all Aprilia RSV4 and Tuono models (all years 2004-2018)
- Ideal for racing and street application, to save space and weight where it matters. This model takes weight savings to another level - only 40 grams!!! Switch is acting as a back mounting bracket for your front brake master cylinder.
- Fits OEM and Brembo RCS master cylinders. Note!!! - Inline fasteners bore.
- Designed for 22 mm standard clip on handle bars.
- Switch functions: engine run/stop (maintained red) and starter activation (momentary black.
- Designed and CNC machined in United States from aircraft grade aluminum to be the smallest and lightest on the market.
- Premium, military grade buttons with gold plated contact surfaces, manufactured in United States by Otto.
- Switch functions: engine run/stop (maintained red) and starter activation (momentary black.
- Plug and play with OEM connector.
TBERSFA-RSV4-BMI
- The switch is a direct plug and play replacement for OEM ignition switch for all Aprilia RSV4 and Tuono models (all years 2004-2018)
- Ideal for racing and street application, to save space and weight where it matters. This model takes weight savings to another level - only 40 grams!!! Switch is acting as a back mounting bracket for your front brake master cylinder.
- Fits OEM and Brembo RCS master cylinders. Note!!! - Inline fasteners bore.
- Designed for 22 mm standard clip on handle bars.
- Switch functions: engine run/stop (maintained red) and starter activation (momentary black.
- Designed and CNC machined in United States from aircraft grade aluminum to be the smallest and lightest on the market.
- Premium, military grade buttons with gold plated contact surfaces, manufactured in United States by Otto.
- Switch functions: engine run/stop (maintained red) and starter activation (momentary black.
- Plug and play with OEM connector.
Item #: TBERSFA-RSV4-BMI
Condition:
New
Delivery times for APX Racing products can vary from 1-2 weeks if not in stock. Please feel free to call us for ETA if no inventory is listed above.
Price: $205.00
Description:
APEX RACING DEVELOPMENT TWO BUTTON ENGINE RACE SWITCH FOR APRILIA RSV4, TUONO (ALL YEARS) (BREMBO MOUNT OFFSET)
TBERSFA-RSV4-BMO
- The switch is a direct plug and play replacement for OEM ignition switch for all Aprilia RSV4 and Tuono models (all years 2004-2018)
- Ideal for racing and street application, to save space and weight where it matters. This model takes weight savings to another level - only 40 grams!!! Switch is acting as a back mounting bracket for your front brake master cylinder.
- Fits OEM and Brembo RCS master cylinders. Note!!! - OFFSET fasteners bore.
- Designed for 22 mm standard clip on handle bars.
- Switch functions: engine run/stop (maintained red) and starter activation (momentary black.
- Designed and CNC machined in United States from aircraft grade aluminum to be the smallest and lightest on the market.
- Premium, military grade buttons with gold plated contact surfaces, manufactured in United States by Otto.
- Switch functions: engine run/stop (maintained red) and starter activation (momentary black.
- Plug and play with OEM connector.
TBERSFA-RSV4-BMO
- The switch is a direct plug and play replacement for OEM ignition switch for all Aprilia RSV4 and Tuono models (all years 2004-2018)
- Ideal for racing and street application, to save space and weight where it matters. This model takes weight savings to another level - only 40 grams!!! Switch is acting as a back mounting bracket for your front brake master cylinder.
- Fits OEM and Brembo RCS master cylinders. Note!!! - OFFSET fasteners bore.
- Designed for 22 mm standard clip on handle bars.
- Switch functions: engine run/stop (maintained red) and starter activation (momentary black.
- Designed and CNC machined in United States from aircraft grade aluminum to be the smallest and lightest on the market.
- Premium, military grade buttons with gold plated contact surfaces, manufactured in United States by Otto.
- Switch functions: engine run/stop (maintained red) and starter activation (momentary black.
- Plug and play with OEM connector.
Item #: TBERSFA-RSV4-BMO
Condition:
New
Delivery times for APX Racing products can vary from 1-2 weeks if not in stock. Please feel free to call us for ETA if no inventory is listed above.
Price: $205.00
Description:
ATTACK PERFORMANCE BRAKE LEVER GUARD KIT, AERO HARD 901132G
MADE IN USA At Attack Performance they have set up many championship winning chassis along with designing, manufacturing, and building our own MotoGP machine with their own parts. Attack Performance utilizes chassis simulation software to find critical dimensions such as Rake, Trail, Wheel Forces, and Linkage Ratios, just to name a few. Those tools combined with their decades of racing eliminates the guesswork from chassis setup.
MADE IN USA At Attack Performance they have set up many championship winning chassis along with designing, manufacturing, and building our own MotoGP machine with their own parts. Attack Performance utilizes chassis simulation software to find critical dimensions such as Rake, Trail, Wheel Forces, and Linkage Ratios, just to name a few. Those tools combined with their decades of racing eliminates the guesswork from chassis setup.
Item #: 901132G
Condition:
New
Please feel free to call us for ETA if no inventory is listed above.
Price: $142.50
Description:
ATTACK PERFORMANCE BRAKE LEVER GUARD KIT, BLACK 901132B
MADE IN USA At Attack Performance they have set up many championship winning chassis along with designing, manufacturing, and building our own MotoGP machine with their own parts. Attack Performance utilizes chassis simulation software to find critical dimensions such as Rake, Trail, Wheel Forces, and Linkage Ratios, just to name a few. Those tools combined with their decades of racing eliminates the guesswork from chassis setup.
MADE IN USA At Attack Performance they have set up many championship winning chassis along with designing, manufacturing, and building our own MotoGP machine with their own parts. Attack Performance utilizes chassis simulation software to find critical dimensions such as Rake, Trail, Wheel Forces, and Linkage Ratios, just to name a few. Those tools combined with their decades of racing eliminates the guesswork from chassis setup.
Item #: 901132B
Condition:
New
Please feel free to call us for ETA if no inventory is listed above.
Price: $142.50
Description:
ATTACK PERFORMANCE HANDLE BAR KIT, 51MM, BLACK 901108.51B
MADE IN USA At Attack Performance they have set up many championship winning chassis along with designing, manufacturing, and building our own MotoGP machine with their own parts. Attack Performance utilizes chassis simulation software to find critical dimensions such as Rake, Trail, Wheel Forces, and Linkage Ratios, just to name a few. Those tools combined with their decades of racing eliminates the guesswork from chassis setup.
MADE IN USA At Attack Performance they have set up many championship winning chassis along with designing, manufacturing, and building our own MotoGP machine with their own parts. Attack Performance utilizes chassis simulation software to find critical dimensions such as Rake, Trail, Wheel Forces, and Linkage Ratios, just to name a few. Those tools combined with their decades of racing eliminates the guesswork from chassis setup.
Item #: 901108.51B
Condition:
New
Please feel free to call us for ETA if no inventory is listed above.
Price: $225.00
Description:
ATTACK PERFORMANCE REAR 0ET KIT, APRILIA RSV4 10-16, TUONO 13-16, BLACK 710110B
MADE IN USA At Attack Performance they have set up many championship winning chassis along with designing, manufacturing, and building our own MotoGP machine with their own parts. Attack Performance utilizes chassis simulation software to find critical dimensions such as Rake, Trail, Wheel Forces, and Linkage Ratios, just to name a few. Those tools combined with their decades of racing eliminates the guesswork from chassis setup.
MADE IN USA At Attack Performance they have set up many championship winning chassis along with designing, manufacturing, and building our own MotoGP machine with their own parts. Attack Performance utilizes chassis simulation software to find critical dimensions such as Rake, Trail, Wheel Forces, and Linkage Ratios, just to name a few. Those tools combined with their decades of racing eliminates the guesswork from chassis setup.
Item #: 710110B
Condition:
New
Please feel free to call us for ETA if no inventory is listed above.
Price: $589.98
Description:
ATTACK PERFORMANCE REAR SET KIT, APRILIA RSV4 10-16, TUONO 13-16, BLACK (REPLACEMENT PARTS) 710110BE
MADE IN USA At Attack Performance they have set up many championship winning chassis along with designing, manufacturing, and building our own MotoGP machine with their own parts. Attack Performance utilizes chassis simulation software to find critical dimensions such as Rake, Trail, Wheel Forces, and Linkage Ratios, just to name a few. Those tools combined with their decades of racing eliminates the guesswork from chassis setup.
MADE IN USA At Attack Performance they have set up many championship winning chassis along with designing, manufacturing, and building our own MotoGP machine with their own parts. Attack Performance utilizes chassis simulation software to find critical dimensions such as Rake, Trail, Wheel Forces, and Linkage Ratios, just to name a few. Those tools combined with their decades of racing eliminates the guesswork from chassis setup.
Item #: 710110BE
Condition:
New
Please feel free to call us for ETA if no inventory is listed above.
Description:
ATTACK PERFORMANCE REAR SET KIT, APRILIA RSV4 10-16, TUONO 13-16, CLEAR 710110S
MADE IN USA At Attack Performance they have set up many championship winning chassis along with designing, manufacturing, and building our own MotoGP machine with their own parts. Attack Performance utilizes chassis simulation software to find critical dimensions such as Rake, Trail, Wheel Forces, and Linkage Ratios, just to name a few. Those tools combined with their decades of racing eliminates the guesswork from chassis setup.
MADE IN USA At Attack Performance they have set up many championship winning chassis along with designing, manufacturing, and building our own MotoGP machine with their own parts. Attack Performance utilizes chassis simulation software to find critical dimensions such as Rake, Trail, Wheel Forces, and Linkage Ratios, just to name a few. Those tools combined with their decades of racing eliminates the guesswork from chassis setup.
Item #: 710110S
Condition:
New
Please feel free to call us for ETA if no inventory is listed above.
Price: $589.98
Description:
ATTACK PERFORMANCE REAR SET KIT, APRILIA RSV4 10-16, TUONO 13-16, CLEAR (REPLACEMENT PARTS) 710110SE
MADE IN USA At Attack Performance they have set up many championship winning chassis along with designing, manufacturing, and building our own MotoGP machine with their own parts. Attack Performance utilizes chassis simulation software to find critical dimensions such as Rake, Trail, Wheel Forces, and Linkage Ratios, just to name a few. Those tools combined with their decades of racing eliminates the guesswork from chassis setup.
MADE IN USA At Attack Performance they have set up many championship winning chassis along with designing, manufacturing, and building our own MotoGP machine with their own parts. Attack Performance utilizes chassis simulation software to find critical dimensions such as Rake, Trail, Wheel Forces, and Linkage Ratios, just to name a few. Those tools combined with their decades of racing eliminates the guesswork from chassis setup.
Item #: 710110SE
Condition:
New
Please feel free to call us for ETA if no inventory is listed above.
Description:
* Pricing is per caliper, dual disc applications must order two
NOTE: We recommend replacing piston seals when installing the ventilated Caliper Racing Pistons
NOTE: We recommend replacing piston seals when installing the ventilated Caliper Racing Pistons
Item #: BT-CRP-BK1
Condition:
New
Please feel free to call us for ETA if no inventory is listed above.
Price: $175.00
Description:
Rsv4/RF front fender for racing
Item #: A4010AF
Condition:
New
These are not designed to fit with any of the OEM panels. Delivery times for Carbonin products can vary from 3-4 weeks if not in stock. Please feel free to call us for ETA if no inventory is listed above.
Price: $114.30
Description:
Replacement Left side panel
Item #: A5231AF
Condition:
New
These are not designed to fit with any of the OEM panels. Delivery times for Carbonin products can vary from 3-4 weeks if not in stock. Please feel free to call us for ETA if no inventory is listed above.
Price: $137.16
Description:
Replacement Lower fairing
Item #: A5220AF
Condition:
New
These are not designed to fit with any of the OEM panels. Delivery times for Carbonin products can vary from 3-4 weeks if not in stock. Please feel free to call us for ETA if no inventory is listed above.
Price: $222.25
Description:
Replacement Right side panel
Item #: A5232AF
Condition:
New
These are not designed to fit with any of the OEM panels. Delivery times for Carbonin products can vary from 3-4 weeks if not in stock. Please feel free to call us for ETA if no inventory is listed above.
Price: $137.16
Description:
Replacement Tail unit
Item #: A5300AF
Condition:
New
These are not designed to fit with any of the OEM panels. Delivery times for Carbonin products can vary from 3-4 weeks if not in stock. Please feel free to call us for ETA if no inventory is listed above.
Price: $271.78
Description:
Replacement Upper fairing
Item #: A5210AF
Condition:
New
These are not designed to fit with any of the OEM panels. Delivery times for Carbonin products can vary from 3-4 weeks if not in stock. Please feel free to call us for ETA if no inventory is listed above.
Price: $311.15
Description:
Carbonin Carbon Fiber Air Box Inlet Tubes 2009-2020 Aprilia RSV4
Item #: CA4070
Condition:
New
These are not designed to fit with any of the OEM panels. Delivery times for Carbonin products can vary from 3-4 weeks if not in stock. Please feel free to call us for ETA if no inventory is listed above.
Price: $247.65
Description:
Carbon Fiber Alternator Cover Installed With Silicon
Item #: CA4030
Condition:
New
These are not designed to fit with any of the OEM panels. Delivery times for Carbonin products can vary from 3-4 weeks if not in stock. Please feel free to call us for ETA if no inventory is listed above.
Price: $127.00
Description:
Carbon Fiber Clutch Cover Installed With Silicon (Not Supplied)
Item #: CA4040
Condition:
New
These are not designed to fit with any of the OEM panels. Delivery times for Carbonin products can vary from 3-4 weeks if not in stock. Please feel free to call us for ETA if no inventory is listed above.
Price: $139.70
Description:
Replacement Left side Fairing For Carbonin complete fairing, will not fit with other brands includes 2Dzus fasteners
Item #: CA5231
Condition:
New
These are not designed to fit with any of the OEM panels. Delivery times for Carbonin products can vary from 3-4 weeks if not in stock. Please feel free to call us for ETA if no inventory is listed above.
Price: $243.84
Description:
Replacement Lower fairing
Item #: CA5220
Condition:
New
These are not designed to fit with any of the OEM panels. Delivery times for Carbonin products can vary from 3-4 weeks if not in stock. Please feel free to call us for ETA if no inventory is listed above.
Price: $476.25
Description:
Carbon fiber rear fender oem replacement
Item #: CA4020
Condition:
New
These are not designed to fit with any of the OEM panels. Delivery times for Carbonin products can vary from 3-4 weeks if not in stock. Please feel free to call us for ETA if no inventory is listed above.
Price: $158.75
Description:
Replacement Right side Fairing For Carbonin complete fairing, will not fit with other brands Dzus included
Item #: CA5232
Condition:
New
These are not designed to fit with any of the OEM panels. Delivery times for Carbonin products can vary from 3-4 weeks if not in stock. Please feel free to call us for ETA if no inventory is listed above.
Price: $243.84
Description:
Replacement tail unit For Carbonin complete fairing.
Pictures are shown for reference only and may not accurately represent the exact model of your seat
Pictures are shown for reference only and may not accurately represent the exact model of your seat
Item #: CA5300
Condition:
New
These are not designed to fit with any of the OEM panels. Delivery times for Carbonin products can vary from 3-4 weeks if not in stock. Please feel free to call us for ETA if no inventory is listed above.
Price: $572.77
Description:
Replacement Upper Fairing For Carbonin complete fairing, will not fit with other brands
Item #: CA5210
Condition:
New
These are not designed to fit with any of the OEM panels. Delivery times for Carbonin products can vary from 3-4 weeks if not in stock. Please feel free to call us for ETA if no inventory is listed above.
Price: $571.50
Description:
Lightweight Carbon fender Oem Replacement
Item #: CA4010
Condition:
New
These are not designed to fit with any of the OEM panels. Delivery times for Carbonin products can vary from 3-4 weeks if not in stock. Please feel free to call us for ETA if no inventory is listed above.
Price: $194.31
Description:
RSV4 Custom PRO seat for Carbonin bodywork.
Item #: FM560A
Condition:
New
These are not designed to fit with any of the OEM panels. Delivery times for Carbonin products can vary from 3-4 weeks if not in stock. Please feel free to call us for ETA if no inventory is listed above.
Price: $309.88
Description:
RSV4 seat for Carbonin bodywork
Pictures are shown for reference only and may not accurately represent the exact model of your seat
Pictures are shown for reference only and may not accurately represent the exact model of your seat
Item #: FM550A
Condition:
New
These are not designed to fit with any of the OEM panels. Delivery times for Carbonin products can vary from 3-4 weeks if not in stock. Please feel free to call us for ETA if no inventory is listed above.
Price: $227.33
Items 1-60 of 112
- Page 1 of 2
- Next