HHR Performance » 2022, Kawasaki, Ninja ZX-10R

Description: Armour Bodies Kawasaki ZX10R 2021-23 Supersport Kit 71-0171SS

Description: Armour Bodies Kawasaki ZX10R 2021-22 Superbike Seat Base 71-0171SSB

Description: Rotobox BOOST Symmetric Rear Wheel

The new and improved model BOOST carbon fiber wheel from Rotobox, decreasing the weight from the RBX2 with improved design and higher performance! Comes in gloss and matte finish, in both symmetric and convex designs.

Like the RBX2, the BOOST is produced using Rotobox's unique 3-component composite - combining carbon, epoxy and stainless steel. By integrating the stainless 2,5 mm steel wire in each side of the rim, we increase its impact resistance at the most critical outer part. JWL and DOT approved, having met JASO T203-85 safety standards.

Another hidden BOOST gem - the Structural Rib. Thanks to the High Pressure Core Technology the structural rib is placed in the inner side between the spokes, with its mission to support the stress hot spot of the wheel. As a result the BOOST elegant spoke design brings greater stiffness and although the spokes are thinner the BOOST is stronger than ever - with a permissible static load of 280 kg on the rear and 180kg on the front wheel.

ASSEMBLING COMPONENTS
Carbon fiber composite rim, a one-piece hollow carbon cast, reinforced with stainless steel wire and UV protected; 7075 T6 aluminum alloy hubs, spacers and sprocket carrier [only with rear symmetric wheel]. machined from solid and hard anodized; polyurethane cushion drive set; SKF bearings; aluminum valve stem.

PRODUCT QUALITY CONTROL
Your Rotobox wheel has its own Serial Number to track the production history. We confirm to have performed quality verification procedure of your Rotobox wheel.

SIZE
17" x 6.00"

WEIGHT
REAR WHEEL WEIGHT 4.11 kg / 9.06 LBS

MAX. STATIC LOAD
REAR 280 kg / 617 LBS

MAX. OPERATING TEMPERATURE
100 C / 212 F

MAX. PRESSURE
4 BAR / 58 PSI

The wheels conform to safety standard JASO T203-85 for JWL dotE Certification. Before riding on public streets, be sure to check your local regulations.
Rotobox Boost Wheel set Weight example:
Stock S1000RR 11.70kg (25.79 lbs)
Rotobox Boost 6.69kg (14.74 lbs)
Weight saving more than 5.00kg of rotating mass. Incredible!

Description: Replacement Left side Fairing For Carbonin complete fairing, will not fit with other brands or OEM

Description: Replacement lower race Fairing For Carbonin complete fairing, will not fit with other brands or oem fairing
This will work with Kickstand

Description: Replacement right side Fairing For Carbonin complete fairing, will not fit with other brands or OEM

Description: Replacement Upper Fairing For Carbonin complete fairing, will not fit with other brands or with oem bodywork

Description: Replacement left side Fairing For Carbonin complete fairing, will not fit with other brands

Description: Replacement lower race Fairing For Carbonin complete fairing, will not fit with other brands
This will work with Kickstand

Description: Replacement right side Fairing For Carbonin complete fairing, will not fit with other brands

Description: Replacement Upper Fairing For Carbonin complete fairing, will not fit with other brands

Description: Kit consists of:
Upper (4 Dzus)
Lower
Left side panel (7 Dzus)
Cover left side Panel
Right side panel (7 Dzus)
Cover right side panel
Single race tail unit
Seat Unit Battery Tray
Seat Support
Right and Left wings
*Cannot fit OEM Seat
Kickstand can be used (trackday bonus)
No Options for Headlight or tail light cutouts

Description: Bonamici Racing Aluminium Adaptors For Kawasaki ZX-10R 2011-2023 ADLZX

This protection system is intended to protect against accidental contact of the clutch lever with other motorcycles. In addition, thanks to the aerodynamic flow examined by Bonamici Racing technicians, the aesthetics examined by Bonamici Racing could be optimized.

Description: Bonamici Racing Aluminium Brake Lever Aprilia RSV4, Factory, APRC, Tuono 1100, RS 660, Tuono 660 - Honda CBR 1000 RR-R Fireblade SP - Kawasaki ZX-10R (2016/2020) - KTM 1290 Superduke 2020/> - Triumph Daytona 675 675 R (2011/2016), Speed Triple 1050 (2011/2017) LB110

Description: Bonamici Racing Aluminium Rearsets Kawasaki ZX-10R 2016 -2023 K015

Bonamici Rearsets are made from a single piece of billet aluminium in their factory based in Italy, with a black anodised finish for corrosion resistance and durability. These Rearsets are incredibly high quality. To ensure the rearsets are a perfect fit, Bonamici laser scan each and every bike they manufacture parts for in order to ensure fitment and compatibility, after this their parts are fine tuned, tested and validated through various levels of Motorsport. Featuring multiple mounting points, these Rearsets allow you to precisely mount the footpegs in the most comfortable position for the rider. This helps to improve the handling, comfort and appearance of your bike as you can set the Rearsets up to match your particular riding style.

Description: Bonamici Racing Aluminium Rearsets Kawasaki ZX-10R 2021 - 2023 K021

Bonamici Rearsets are made from a single piece of billet aluminium in their factory based in Italy, with a black anodised finish for corrosion resistance and durability. These Rearsets are incredibly high quality. To ensure the rearsets are a perfect fit, Bonamici laser scan each and every bike they manufacture parts for in order to ensure fitment and compatibility, after this their parts are fine tuned, tested and validated through various levels of Motorsport. Featuring multiple mounting points, these Rearsets allow you to precisely mount the footpegs in the most comfortable position for the rider. This helps to improve the handling, comfort and appearance of your bike as you can set the Rearsets up to match your particular riding style.

Description: Bonamici Racing Engine Protection Full Kit For Kawasaki ZX-10R 2011 - 2023 CP012

From the cooperation with racing teams from the Superbike World Championship, the aluminium engine cover protectors from Bonamici Racing were born. Manufactured from high quality billet aluminium and milled using the latest CNC technology, the anodised protector kits perfectly protect the bike’s engine housing in the event of a crash. The lightweight aluminium protectors are simply screwed onto the original engine housing and guarantee a perfect fit.
No gluing necessary!
Top quality Made in Italy

Description: Bonamici Racing Engine Protection Left Side For Kawasaki ZX-10R 2011 - 2023 CP011

From the cooperation with racing teams from the Superbike World Championship, the aluminium engine cover protectors from Bonamici Racing were born. Manufactured from high quality billet aluminium and milled using the latest CNC technology, the anodised protector kits perfectly protect the bike’s engine housing in the event of a crash. The lightweight aluminium protectors are simply screwed onto the original engine housing and guarantee a perfect fit.
No gluing necessary!
Top quality Made in Italy

Description: Listing is for 2 pad, which is 1 caliper worth
Z04 dedicated racing compound
Pads are 7.9 mm thick total
Replacement from part number 107A48649
*for Brembo M4 M50 GP4RS GP4RX and .484 Cafe Calipers

Description: Set includes left and right calipers

BRAKE PADS ARE INCLUDED

Built from a single billet piece of aluminum and through careful machining, the Brembo GP4-RB brake calipers are a really important upgrade to the production system.

The improvement in terms of performance and safety is guaranteed as well as its characteristics in terms of power, lightness and modularity are guaranteed.

The body is entirely in aluminum alloy with 22.5 mm offset and 108 mm mounting size.

The braking mechanism is entrusted to 4 totally aluminum 30/34 mm pistons.

The aesthetics are no less with the completely black body and the Brembo logo in glossy red.



TECHNICAL FEATURES:

- Wheelbase: 108 mm

- Offset: 22,5 mm

- Piston diameter: 30 mm

- No. of pistons: 4

- Pistons material: Aluminum

- H brake band: 34 mm

- Finish: Black oxidation

Description: Kit consists of:
Upper (4 Dzus)
Lower
Left side panel (7 Dzus)
Cover left side Panel
Right side panel (7 Dzus)
Cover right side panel
Single race tail unit (includes battery tray, seat support and winglets)
Does not come painted* Photo for kit reference only

Description: Right Rear Wing for tail unit. It can only be used with carbonin tail section
This is parts of a 5 pcs set
Required parts are Battery tray , Seat support and tail section

Description: This is only the battery tray/underside of the tail section. It can only be used with the remaining carbonin tail section parts
This is parts of a 5 pcs set
Required parts are Tail Piece , Seat support left and right wings

Description: This is only the top section of the race tail. It can only be used with carbonin tail section
This is parts of a 5 pcs set
Required parts are Battery tray , Seat support left and right wings

Description: Carbon fiber airbox inlet tube and fairing bracket weighing in at 313grams
Designed to replace the oem tube and bracket.

Description: Carbonin Carbon Fiber Fuel Tank Extension 2011-2020 Kawasaki ZX10R
*Carbon Weave will match all other Carbonin products carbon including the Carbonin Airbox Cover W/ Side Panels.
*Made to fit over OEM Tank and perefect fitment with Carbonin Airbox cover
*Created for better braking ergonomics and mid turn handling.
*Keeps you from Sliding forward and also give something for your leg to hold onto in mid corner.
*New design with thicker carbon weave that is lighter and stronger.
*7oz Total weight
*3M Vinyl Tape Included for Installation

Description: Whether you're riding on the street or on the track it makes sense to protect your frame, swingarm and engine case covers from any possible damage:

Protects against damage
Gravel rash
Road rash
Wet Lay Carbon Fiber with Carbon Kevlar laid on the inside for added protection.

These are light-weight and do not interfere with any OEM bodywork.

These also look great and give your bike a great appearance

Description: This seat fits only on Carbonin bodywork

Description: D.I.D ER Series Exclusive 520 ERV7 Racing Chain 120 Link
520ERV7120ZB

-Premium Road Racing Chain
-Features gold color plates
-Tensile strength: 8,800 lbs.

Description: Extreme Components GP EVO Carbon Fiber Brake Lever Guard CPLEVO
-Made In Italy
-Research and development takes place exclusively through collaboration with the best race teams engaged for years in the most prestigious national and world competitions; And only after specific tests, does Extreme Components start the production. -Developed with Wind Tunnel Technology to guarantee best aerodynamics
Only racing use this does not bolt up to the oem handlebar as it uses an expanding adaptor that goes into a hollow clipon tube

Description: Extreme Components GP EVO Rearsets Kit Reverse Shifting Aluminium Black Heel KAWASAKI ZX 10 R (2016/2022) PED-GP EVO ZX1016 LCR ZX1016B
-Made In Italy
-Research and development takes place exclusively through collaboration with the best race teams engaged for years in the most prestigious national and world competitions; And only after specific tests, does Extreme Components start the production.

Description: Made from Carbon Fiber these Brake lines are Ultra Lightweight and flexible
Designed to Fit the Kawasaki ZX10R from 2016-2020 this is the Superstock version whichis a 3 line kit consisting of a 3T style front and a single Rear Line With Banjo Bolts

If you are using a different Caliper or Master cylinder from oem please specify in checkout notes so we can order with correct fittings and banjo threads
This line works with the oem and Brembo RCS master cylinder
*often this item is made to order due options so please allow up to 4 weeks for delivery.

Description: MIVV Full System Stainless Steel Exhaust For KAWASAKI ZX-10 R / RR / SE 2016 - 2022 X.KA.0006.SDRX

Description: MWR Racing Fairing Stay for the Kawasaki ZX-10R / ZX-10RR (2021+) MWR-AT-465

Description: MWR XXL Intake Duct for the Kawasaki ZX-10R / ZX-10RR (2021+) MWR-AT-460

Description: Qnium Radial Rear Left Hand Brake Master Cylinder 12mm

Many riders like to control the rear brake with their left hand. The Left Hand Brake gives riders optimum control over their rear brakes. The material use of the Qnium Radial Left Hand Brake is of sublime quality. Your fingers will give you a lot more feeling by braking than your foot. Qnium’s Left Hand Brake can help when you’re looking for fast lap times on the circuits. The brake feels better with your hand than with your feet. The brake can be operated with very little force. You will experience more control in the braking phase and when turning in the middle of the corner. With this radial left hand brake brake it is also possible to brake, when you steer your bike to the right and having a lean angle. For riders who want to keep the pedal brake as well as the Left Hand Brake, Qnium has also created rear brake master cylinders to compliment this setup, available with an extra banjo connection for a pass through design.

These high quality brake levers can be placed both above and below the lever of the clutch.

Used in Moto2, Moto3, and in other FIM world championships. Top Moto2 riders like Bo Bendsneyder, Thomas Luthi and Marcel Schrotter are using the Qnium Radial Left Hand Brake to get the best out of their races.

Made in Netherlands

Description: *NEW Rotobox Bullet Forged Carbon Fiber Rear Wheel Size 17"X 6" for 2021 ZX10RR ONly Does not fir 2021 ZX10R
REAR WHEEL Weight
4.06 kg (8.95 lbs)

Includes Sprocket Carrier and Cush Drive Rubbers

Rotobox has extended its carbon motorcycle wheel product line by unveiling the Rotobox Bullet, the new thin spoke, ultra-light forged carbon wheel at EICMA. Rotobox is one of the leading companies in the development of lightweight high-performance carbon automotive wheels. It is also a company not satisfied with just keeping up with trends but setting them.

The wheels conform to safety standard JASO T203-85 for JWL dotE Certification. Before riding on public streets, be sure to check your local regulations.

UV PROTECTIVE COATING:
The carbon cast is protected from radiation with a very thin layer of special clear UV protective coating. Together with the clear and smooth rim surface it ensures the wheel a zero notch effect.

HIGH QUALITY CENTER PARTS:
For each motorcycle model the hubs are CNC machined from high quality 7075 T6 aluminum alloy used in the aviation industry, anodized into optional color and permanently assembled to the carbon rim.

SOLID THIN SPOKES:
To create solid thin spokes we use special carbon fiber yarn developed for military use.

THREE-COMPONENT-COMPOSITE:
Produced using Rotobox's unique 3 component composite - combining carbon, epoxy and stainless steel. The stainless 2,5 mm steel wire is integrated in each side of the rim increasing its impact resistance at the most critical outer part.

Titanium Hex Head Bolts M10x1.5x25mm:
Made from Aircraft Spec Grade 5 Titanium Alloy. Special high performance design by Rotobox. Precision machined with rolled threads and completely corrosion free. Excellent durability and minimum weight, 45% lighter than steel equivalents. Available optionally with the wheels.

CHOPPED CARBON FIBERS MEETS WOVEN FABRIC:
Rotobox's unique technology enables combining chopped carbon fibers with woven fabric seamlessly in one-piece monocoque.

PENTAGON SHAPED HUB:
The hub is locked into the carbon part with pentagon shape for ultimate transmission of torque.

Description: *NEW Rotobox Bullet Forged Carbon Fiber Rear Wheel Size 17"X 6"
REAR WHEEL Weight
4.06 kg (8.95 lbs)

Includes Sprocket Carrier and Cush Drive Rubbers

Rotobox has extended its carbon motorcycle wheel product line by unveiling the Rotobox Bullet, the new thin spoke, ultra-light forged carbon wheel at EICMA. Rotobox is one of the leading companies in the development of lightweight high-performance carbon automotive wheels. It is also a company not satisfied with just keeping up with trends but setting them.

The wheels conform to safety standard JASO T203-85 for JWL dotE Certification. Before riding on public streets, be sure to check your local regulations.

UV PROTECTIVE COATING:
The carbon cast is protected from radiation with a very thin layer of special clear UV protective coating. Together with the clear and smooth rim surface it ensures the wheel a zero notch effect.

HIGH QUALITY CENTER PARTS:
For each motorcycle model the hubs are CNC machined from high quality 7075 T6 aluminum alloy used in the aviation industry, anodized into optional color and permanently assembled to the carbon rim.

SOLID THIN SPOKES:
To create solid thin spokes we use special carbon fiber yarn developed for military use.

THREE-COMPONENT-COMPOSITE:
Produced using Rotobox's unique 3 component composite - combining carbon, epoxy and stainless steel. The stainless 2,5 mm steel wire is integrated in each side of the rim increasing its impact resistance at the most critical outer part.

Titanium Hex Head Bolts M10x1.5x25mm:
Made from Aircraft Spec Grade 5 Titanium Alloy. Special high performance design by Rotobox. Precision machined with rolled threads and completely corrosion free. Excellent durability and minimum weight, 45% lighter than steel equivalents. Available optionally with the wheels.

CHOPPED CARBON FIBERS MEETS WOVEN FABRIC:
Rotobox's unique technology enables combining chopped carbon fibers with woven fabric seamlessly in one-piece monocoque.

PENTAGON SHAPED HUB:
The hub is locked into the carbon part with pentagon shape for ultimate transmission of torque.