- Home »
- Catalog »
- Chassis & Suspension »
- Hardware
HHR Performance » APX Racing
Made IN USA - Replacement Plug and Play Button Pod switches to replace your fragile OEM Plastic controls.
Made from Aircraft Grade Aluminum
American Made
Otto Engineering Buttons
Model Specific for street and race applications
Run/Kill switches that mount to Brembo Master cylinders
And dont forget their super baller Titanium bolts and hardware! Made for racers that know what they want!
Browse Hardware Products
Items 1-10 of 10
Description:
APEX RACING DEVELOPMENT DUCATI PANIGALE REAR SPROCKET TITANIUM 12 POINT FLANGE NUT M10X1
DPRST12PFN
- Reduce unsprung mass by replacing OEM steel hardware with our aircraft grade Titanium.
- Switching to Titanium provides instant 45% weight savings and more than twice tensile strength
- Fastener particulars: 12 point flanged nut M10 thread pitch -1mm, dk=20 s=14 s=10
- Manufactured employing Ti-6Al-4V (Grade 5) Titanium alloy. This is non recycled aerospace specification Titanium alloy.
- Designed and manufactured in USA
- Our titanium products are manufactured to the highest quality standards and are priced very competitively.
DPRST12PFN
- Reduce unsprung mass by replacing OEM steel hardware with our aircraft grade Titanium.
- Switching to Titanium provides instant 45% weight savings and more than twice tensile strength
- Fastener particulars: 12 point flanged nut M10 thread pitch -1mm, dk=20 s=14 s=10
- Manufactured employing Ti-6Al-4V (Grade 5) Titanium alloy. This is non recycled aerospace specification Titanium alloy.
- Designed and manufactured in USA
- Our titanium products are manufactured to the highest quality standards and are priced very competitively.
Item #: DPRST12PFN
Condition:
New
Factory pre-order only for all APX Racing products have 1-to-2-week ETA for production from the manufacturer. Feel free to contact us if you have any questions.
Price: $6.50
Description:
APEX RACING DEVELOPMENT TITANIUM MOUNTING HARDWARE A SET OF 4 PCS M6X25MM
TMHASO4P-M6X25
Titanium Brake/Clutch master cylinder mounting bolt set (Safety Wire Bore) M6x1x25
Four (4) bolts per set.y.
TMHASO4P-M6X25
Titanium Brake/Clutch master cylinder mounting bolt set (Safety Wire Bore) M6x1x25
Four (4) bolts per set.y.
Item #: TMHASO4P-M6X25
Condition:
New
Factory pre-order only for all APX Racing products have 1-to-2-week ETA for production from the manufacturer. Feel free to contact us if you have any questions.
Price: $31.99
Description:
APEX RACING DEVELOPMENT TITANIUM ENGINE CASING FLANGED BOLT M6X75
TECFBM6X75
- Reduce mass by replacing OEM steel hardware with our aircraft grade Titanium.
- Switching to Titanium provides instant 45% weight savings and more than twice tensile strength
- Fastener particulars M6X75 SOCKET FLANGED BOLT
- Manufactured employing Ti-6Al-4V (Grade 5) Titanium alloy. This is non recycled aerospace specification Titanium alloy.
- Designed and manufactured in USA
- Our titanium products are manufactured to the highest quality standards and are priced very competitively.
PRICE PER 1 PIECE
TECFBM6X75
- Reduce mass by replacing OEM steel hardware with our aircraft grade Titanium.
- Switching to Titanium provides instant 45% weight savings and more than twice tensile strength
- Fastener particulars M6X75 SOCKET FLANGED BOLT
- Manufactured employing Ti-6Al-4V (Grade 5) Titanium alloy. This is non recycled aerospace specification Titanium alloy.
- Designed and manufactured in USA
- Our titanium products are manufactured to the highest quality standards and are priced very competitively.
PRICE PER 1 PIECE
Item #: TECFBM6X75
Condition:
New
Factory pre-order only for all APX Racing products have 1-to-2-week ETA for production from the manufacturer. Feel free to contact us if you have any questions.
Price: $3.99
Description:
APEX RACING DEVELOPMENT TITANIUM FRONT BRAKE ROTOR MOUNTING TORX BOLT SET M8X20MM Full set x10 bolts
TIBM820
- Reduce unsprung and in this case rotational mass by replacing OEM steel bolts with our aircraft grade Titanium set.
- Switching to Titanium caliper bolts provides instant 45% weight savings and more than twice tensile strength. 110 grams on the front wheel.
- Bolt particulars TORX M8x1.25x20
- Manufactured employing Ti-6Al-4V (Grade 5) Titanium alloy. This is non recycled aerospace specification Titanium alloy.
- Designed and manufactured in USA
- Our titanium products are manufactured to the highest quality standards and are priced very competitively.
- Set fits the following bikes and models:
1. Ducati Panigale 1199, 1299, Monster, 1099, 1198
2. Kawasaki ZX 10R 2016
May fit other models with similar bolt dimensions..
TIBM820
- Reduce unsprung and in this case rotational mass by replacing OEM steel bolts with our aircraft grade Titanium set.
- Switching to Titanium caliper bolts provides instant 45% weight savings and more than twice tensile strength. 110 grams on the front wheel.
- Bolt particulars TORX M8x1.25x20
- Manufactured employing Ti-6Al-4V (Grade 5) Titanium alloy. This is non recycled aerospace specification Titanium alloy.
- Designed and manufactured in USA
- Our titanium products are manufactured to the highest quality standards and are priced very competitively.
- Set fits the following bikes and models:
1. Ducati Panigale 1199, 1299, Monster, 1099, 1198
2. Kawasaki ZX 10R 2016
May fit other models with similar bolt dimensions..
Item #: TIBM820
Condition:
New
Factory pre-order only for all APX Racing products have 1-to-2-week ETA for production from the manufacturer. Feel free to contact us if you have any questions.
Price: $78.00
Description:
APEX RACING DEVELOPMENT TITANIUM FORK PINCH BOLT SET VARIOUS SIZES
M8X40 YAMAHA R1 R6
M8X30 DUCATI V4
M6X25 DUCATI PANIGALE (NON V4)
M8X40 Kawasaki ZX10R ZX6R
M8X40 YAMAHA R1 R6
M8X30 DUCATI V4
M6X25 DUCATI PANIGALE (NON V4)
M8X40 Kawasaki ZX10R ZX6R
- Reduce unsprung mass by replacing OEM steel bolts with our aircraft grade Titanium set.
- Switching to Titanium bolts provides instant 45% weight savings and more than twice tensile strength.
- Safety wire bores - 5 bores.
- Bolt particulars VARIOUS SIZES TO FIT MOST POPULAR RACE MOTORCYCLES: Panigale V4, 1199,1299, 899, 959, Yamaha R1, R6, Kawasaki 636, ZX10R
Note: If you are not sure which size you need give us a call and we will get it sorted.
- Manufactured employing Ti-6Al-4V (Grade 5) Titanium alloy. This is non recycled aerospace specification Titanium alloy.
- Designed and manufactured in USA
- Our titanium products are manufactured to the highest quality standards and are priced very competitively.
Item #: M8X40 YAMAHA R1 R6
Condition:
New
Factory pre-order only for all APX Racing products have 1-to-2-week ETA for production from the manufacturer. Feel free to contact us if you have any questions.
Price: $40.00
Description:
APEX RACING DEVELOPMENT TITANIUM RACE DRILLED BANJO BOLTS VARIOUS SIZES
TIBBSF
TIBBSC
TIBBDC
Our banjo bolts are manufactured for pure performance and reliability:
Safety Wire Bored
High Flow Fluid orifice ( see note 2 )
Compact head size for 11mm wrench
- Single and Double Bolts with fine or coarse thread are available.
Part numbers:
Single Banjo Fine Thread Part# TIBBSF (All Brembo products, OEM European Equipment)
Single Banjo Coarse Thread Part# TIBBSC (Japanese Equipment)
Double Banjo Coarse Thread Part# TIBBDC
- Manufactured employing Ti-6Al-4V (Grade 5) Titanium alloy. This is non recycled aerospace specification Titanium alloy. Superior strength, weight and corrosion resistance compared to steel hardware.
- Designed and manufactured in USA
- Our titanium products are manufactured to the highest quality standards and are priced very competitively.
Note: For Brembo calipers and master and slave pumps use fine thread pitch at 1.00mm. For most Japanese bikes use coarse thread pitch at 1.25mm
Note2: Most bikes are sold with 2.5mm fluid channel bore. Our banjo bolts are bored at 3.5mm. This is a 20% increase in fluid channel volume.
TIBBSF
TIBBSC
TIBBDC
Our banjo bolts are manufactured for pure performance and reliability:
Safety Wire Bored
High Flow Fluid orifice ( see note 2 )
Compact head size for 11mm wrench
- Single and Double Bolts with fine or coarse thread are available.
Part numbers:
Single Banjo Fine Thread Part# TIBBSF (All Brembo products, OEM European Equipment)
Single Banjo Coarse Thread Part# TIBBSC (Japanese Equipment)
Double Banjo Coarse Thread Part# TIBBDC
- Manufactured employing Ti-6Al-4V (Grade 5) Titanium alloy. This is non recycled aerospace specification Titanium alloy. Superior strength, weight and corrosion resistance compared to steel hardware.
- Designed and manufactured in USA
- Our titanium products are manufactured to the highest quality standards and are priced very competitively.
Note: For Brembo calipers and master and slave pumps use fine thread pitch at 1.00mm. For most Japanese bikes use coarse thread pitch at 1.25mm
Note2: Most bikes are sold with 2.5mm fluid channel bore. Our banjo bolts are bored at 3.5mm. This is a 20% increase in fluid channel volume.
Item #: FINE TIBBSF
Condition:
New
Factory pre-order only for all APX Racing products have 1-to-2-week ETA for production from the manufacturer. Feel free to contact us if you have any questions.
Price: $10.00
Description:
APEX RACING DEVELOPMENT TITANIUM REAR SPROCKET MOUNTING STUDS NINJA 300, 400, YAMAHA R3, R1
TRSMSNR
- Reduce mass by replacing OEM steel studs with our aircraft grade Titanium set.
- Switching to Titanium bolts provides instant 45% weight savings and more than twice tensile strength.
- Stud particulars M10x40 dual threaded
Fits Kawasaki Ninja 300, 400, Yamaha R3, R1 (with Aftermarket wheels), may fit other models.
- Manufactured employing Ti-6Al-4V (Grade 5) Titanium alloy. This is non recycled aerospace specification Titanium alloy.High corrosion resistance
- Designed and manufactured in USA
- Our titanium products are manufactured to the highest quality standards and are priced very competitively.
- SIX (6) studs per set.
TRSMSNR
- Reduce mass by replacing OEM steel studs with our aircraft grade Titanium set.
- Switching to Titanium bolts provides instant 45% weight savings and more than twice tensile strength.
- Stud particulars M10x40 dual threaded
Fits Kawasaki Ninja 300, 400, Yamaha R3, R1 (with Aftermarket wheels), may fit other models.
- Manufactured employing Ti-6Al-4V (Grade 5) Titanium alloy. This is non recycled aerospace specification Titanium alloy.High corrosion resistance
- Designed and manufactured in USA
- Our titanium products are manufactured to the highest quality standards and are priced very competitively.
- SIX (6) studs per set.
Item #: TRSMSNR
Condition:
New
Factory pre-order only for all APX Racing products have 1-to-2-week ETA for production from the manufacturer. Feel free to contact us if you have any questions.
Price: $69.00
Description:
APEX RACING DEVELOPMENT TITANIUM SWINGARM PINCH BOLT SET DUCATI 848, 1098, 899, 959, 1199, 1299
TSPBSD
- Reduce mass by replacing OEM steel bolts with our aircraft grade Titanium set.
- Switching to Titanium bolts provides instant 45% weight savings and more than twice tensile strength.
- Safety wire bores - Not bored. We can pre drill them for you at a 10$ charge.
- Bolt particulars M12x40 Allen Tapered bolt with a hollow core.
- Manufactured employing Ti-6Al-4V (Grade 5) Titanium alloy. This is non recycled aerospace specification Titanium alloy.
- Designed and manufactured in USA
- Our titanium products are manufactured to the highest quality standards and are priced very competitively.
- TWO (2) bolts per se
TSPBSD
- Reduce mass by replacing OEM steel bolts with our aircraft grade Titanium set.
- Switching to Titanium bolts provides instant 45% weight savings and more than twice tensile strength.
- Safety wire bores - Not bored. We can pre drill them for you at a 10$ charge.
- Bolt particulars M12x40 Allen Tapered bolt with a hollow core.
- Manufactured employing Ti-6Al-4V (Grade 5) Titanium alloy. This is non recycled aerospace specification Titanium alloy.
- Designed and manufactured in USA
- Our titanium products are manufactured to the highest quality standards and are priced very competitively.
- TWO (2) bolts per se
Item #: TSPBSD
Condition:
New
Factory pre-order only for all APX Racing products have 1-to-2-week ETA for production from the manufacturer. Feel free to contact us if you have any questions.
Price: $45.00
Description:
TITANIUM TAPERED ALLEN BOLT A SET OF 4 PCS DIN 912
TTABASO4PD
Reduce mass by replacing OEM steel hardware with our aircraft grade Titanium.
Switching to Titanium provides instant 45% weight savings and more than twice tensile strength
Fastener particulars : TAPERED Allen bolt DIN 912. Available in multiple sizes
Manufactured employing Ti-6Al-4V (Grade 5) Titanium alloy. This is non recycled aerospace specification Titanium alloy.
Designed and manufactured in USA
Our titanium products are manufactured to the highest quality standards and are priced very competitively.
NOTE: PRICE PER 4 PIECE SET Contact us for custom/large quantity pricing.
TTABASO4PD
Reduce mass by replacing OEM steel hardware with our aircraft grade Titanium.
Switching to Titanium provides instant 45% weight savings and more than twice tensile strength
Fastener particulars : TAPERED Allen bolt DIN 912. Available in multiple sizes
Manufactured employing Ti-6Al-4V (Grade 5) Titanium alloy. This is non recycled aerospace specification Titanium alloy.
Designed and manufactured in USA
Our titanium products are manufactured to the highest quality standards and are priced very competitively.
NOTE: PRICE PER 4 PIECE SET Contact us for custom/large quantity pricing.
Item #: TTABASO4PD
Condition:
New
Factory pre-order only for all APX Racing products have 1-to-2-week ETA for production from the manufacturer. Feel free to contact us if you have any questions.
Price: $13.00
Description:
APEX RACING DEVELOPMENT TITANIUM TORX BOLT VARIOUS SIZES
TTBVS
- Reduce mass by replacing OEM steel bolts with our aircraft grade Titanium set.
- Switching to Titanium hardware provides instant 45% weight savings and more than twice tensile strength.
- Manufactured employing Ti-6Al-4V (Grade 5) Titanium alloy. This is non recycled aerospace specification Titanium alloy.
- Designed and manufactured in USA
- Our titanium products are manufactured to the highest quality standards and are priced very competitively.
TTBVS
- Reduce mass by replacing OEM steel bolts with our aircraft grade Titanium set.
- Switching to Titanium hardware provides instant 45% weight savings and more than twice tensile strength.
- Manufactured employing Ti-6Al-4V (Grade 5) Titanium alloy. This is non recycled aerospace specification Titanium alloy.
- Designed and manufactured in USA
- Our titanium products are manufactured to the highest quality standards and are priced very competitively.
Item #: TTVBS
Condition:
New
Factory pre-order only for all APX Racing products have 1-to-2-week ETA for production from the manufacturer. Feel free to contact us if you have any questions.
Price: $3.00
Items 1-10 of 10
More About APX Racing
- CNC billet Housing
- Latching & Momentary Buttons
- Plug & Play
- Titanium Mounting Bolts