HHR Performance - Calipers

Brakes - Calipers
Aftermarket Brake Calipers are a huge upgrade for racing applications and street

Browse Calipers Products

Sort
View
 
Items 1-60 of 122
Description: Alpha Racing Brembo brake caliper CNC P2 34, rear 3421A006A00
Mounting will require custom Brackets. This is not a direct bolt on and is available for Superbike Applications
Brembo Racing brake caliper CNC P2 34, rear, hole distance 84 mm
Item #: 3421A006A00
Condition: New
On-hand inventory ships within 24 hours. We place weekly orders with Alpha, If we are out of stock on an item we can have it within 2 to 3 weeks Order now to insure you are allocated from the next shipment. Please note supply-chain related delays are possible.
Price: $647.22

Qty:

Description: Alpha Racing Brembo brake caliper CNC P4 24, rear 3421A004A00

Brembo brake caliper CNC P4 24, rear, titanium pistons, hole distance 64 mm
Item #: 3421A004A00
Condition: New
On-hand inventory ships within 24 hours. We place weekly orders with Alpha, If we are out of stock on an item we can have it within 2 to 3 weeks Order now to insure you are allocated from the next shipment. Please note supply-chain related delays are possible.
Price: $1,307.18

Qty:

Description: Alpha Racing Brembo Racing brake caliper kit GP4-PR 3411A021P00

Brembo Racing caliper kit GP4-PR, nickel-plated monobloc radial caliper with 4 titanium pistons, 108 mm bolting distance, ideally for brake discs with 30/28 mm rotor height
Item #: 3411A021P00
Condition: New
On-hand inventory ships within 24 hours. We place weekly orders with Alpha, If we are out of stock on an item we can have it within 2 to 3 weeks Order now to insure you are allocated from the next shipment. Please note supply-chain related delays are possible.
Price: $5,682.36

Qty:

Description: Alpha Racing Brembo Racing brake caliper kit GP4-RR 3411A020P00

Brembo Racing caliper Kit GP4-RR, nickel-plated monobloc radial caliper with 4 titan pistons, distance between screws 108 mm, for brake discs 4,5 - 6 mm and 30 mm rotor height
Item #: 3411A020P00
Condition: New
On-hand inventory ships within 24 hours. We place weekly orders with Alpha, If we are out of stock on an item we can have it within 2 to 3 weeks Order now to insure you are allocated from the next shipment. Please note supply-chain related delays are possible.
Price: $3,886.08

Qty:

Description: Alpha Racing Brembo Racing brake caliper kit GP4-RX, 100 mm 3411A050B00

Brembo Racing brake caliper kit GP4-RX 4-piston 32/32 (right/left), 2 pieces, fits BMW S 1000 RR OEM fork, 100 mm hole distance
Item #: 3411A050B00
Condition: New
On-hand inventory ships within 24 hours. We place weekly orders with Alpha, If we are out of stock on an item we can have it within 2 to 3 weeks Order now to insure you are allocated from the next shipment. Please note supply-chain related delays are possible.
Price: $2,070.19

Qty:

GP 4RR Brembo 108mm
Description: The GP4 caliper family has been completed with the arrival of the new Brembo GP4-rr the ultra-high-performance monobloc racing caliper. Already known to fans, it returns technically updated and with a completely new look. *For use w/ Narrow Band Disc. This caliper does not come with brake pads – you will need to order 07835424 x 2 PER CALIPER.
Item #: XB9L2A1
Condition: New
Ships within 24-48 hours. Please note supply-chain related delays are possible. We will contact you with an ETA once your order has been processed
Price: $3,999.00

Qty:

Description:
CNC Caliper, Axial Mount


Item Summary
Specific billet-machined caliper brackets
2 x 30mm pistons, 2 x 34mm pistons
4 piston caliper
About the Product
Technical Specifications

Center to Center: 50mm
Position: Front
Caliper Body: 2-piece
Ficing: Axial + Bracket
Pistons: 4
Piston Diameter: 30/34mm
Disc Height: 32-34mm
Material: Billet Aluminum
Finishing: Hard Anodized
Bridges: 2
Hardware: Steel
Pistons: Aluminum
Weight (w/o pads):680gr
Pad Shape: D
Pads Included: Yes
Offset: 26.5mm
Brake Fluid: DOT4
Spare Parts

Bleed Screw Cover
Bleeding Screw
Pin
Spindle
Thermotapes 88-127 degrees
Thermotapes 132-171 degrees
Brake Pads

Genuine: 107442650
Z03: 107A48673
Z04 Compound: 107A48653
Item #: 120B76520
Condition: New
Ships within 24-48 hours. Please note supply-chain related delays are possible. We will contact you with an ETA once your order has been processed
Price: $805.00

Qty:

Description: Item Summary

Floating caliper PF2x24
Includes Aluminium mounting bracket
Caliper body CNC machined from billet
Includes brake pads
For more information, please refer to the Official Brembo product release
About the Product
Technical Specifications

Center to Center: 95mm (bracket spacing)
Position: Front
Caliber Body: Floating
Fixing: Axial + Bracket
Number of Pistons: 2
Disc Height: 28mm
Piston Diameter: 24mm
Construction Material: CNC Aluminum
Finishing: Hard Anodized
Weight: 716gr
Brake Fluid: DOT4
Pad Shape: V
Pads Included: Yes
Offset: 17.95mm-18.15mm
Hardware: Steel
Pistons: Aluminum
Spare Parts

Bleeding Screw
Rubber Bellow Kit
Spring&Blade Kit
Spindle&Pin Kit
Thermotapes 88-127 degrees
Thermotapes 132-171 degrees
Brake Pads

OE Compound: 107861750
Z04 Compound: 107A48646
Item #: 122A99021
Condition: New
Ships within 24-48 hours. Please note supply-chain related delays are possible. We will contact you with an ETA once your order has been processed
Price: $899.00

Qty:

Description:
Black Coating, 69.1mm Mount Spacing, Front, Left


Item Summary
Caliper body CNC machined
Full black anodizing treatment
Standard Custom fixing and off-set
Complete with sintered pads;
About the Product
Technical Specifications

Position: Front
Caliper Body: 2-piece
Number of Pistsons: 4
Disc Height: 32/34/46mm
Piston Diameter: 32mm
Construction Material: CNC Aluminum
Finishing: Hard Anodized
Weight: 845gr
Brake Fluid: DOT4
Hardware: Steel
Pistons: Aluminum
Center To Center: 69.1mm
Offset: 34.1mm
Spare Parts

Banjo Bolt
Bleeding Screw
Spring
Thermotapes 88-127 degrees
Thermotapes 132-171 degrees
Brake Pads

Genuine: 107988210
Genuine: 07BB3093
Item #: 120B81469
Condition: New
Ships within 24-48 hours. Please note supply-chain related delays are possible. We will contact you with an ETA once your order has been processed
Price: $729.00

Qty:

Description:
Black Coating, 69.1mm Mount Spacing, Right


Item Summary
Caliper body CNC machined
Full black anodizing treatment
Standard Custom fixing and off-set
Complete with sintered pads
About the Product
Technical Specifications

Position: Front
Caliper Body: 2-piece
Fixing: Axial
Number of Pistons: 4
Disc Height: 32/34/46mm
Piston Diameter: 32mm
Bridges: 3
Pad Shape C
Includes Pads: Yes
Construction Material: CNC aluminum
Finishing: Hard Anodized
Weight (without pads): 845gr
Brake Fluid: DOT4
Hardware: Steel
Pistons: Aluminum
Center to Center: 69.1mm
Offet: 34.1mm
Spare Parts

Banjo Bolt
Bleeding Screw
Spring
Thermotapes 88-127 degrees
Thermotapes 132-171 degrees
Brake Pads

Geniuine: 107988210
Z03 Sintered Endurance: 107A48669
Z04 Sintered: 107A48639
Item #: 120B81479
Condition: New
Ships within 24-48 hours. Please note supply-chain related delays are possible. We will contact you with an ETA once your order has been processed
Price: $729.00

Qty:

Description:
Black Coating Machined Logo, 69.1mm Mount Spacing, Right


Item Summary
Caliper body CNC machined
Black anodizing treatment with re-machined Brembo Logo
Standard Custom fixing and off-set
Complete with sintered pads
About the Product
Technical Specifications

Position: Front
Caliper Body: 2-piece
Fixing: Axial
Number of Pistons: 4
Disc Height: 32/34/46mm
Piston Diameter: 32mm
Construction Material: CNC aluminum
Finishing: Hard Anodized
Weight (without pads): 845gr
Pads Included: Yes
Brake Fluid: DOT4
Hardware: Steel
Pistons: Aluminum
Center to Center: 69.1mm
Offet: 34.1mm
Spare Parts

Banjo Bolt
Bleeding Screw
Spring
Thermotapes 88-127 degrees
Thermotapes 132-171 degrees
Brake Pads

Geniuine: 107988210
Geniuine: 07BB3093
Item #: 120B81481
Condition: New
Ships within 24-48 hours. Please note supply-chain related delays are possible. We will contact you with an ETA once your order has been processed
Price: $759.00

Qty:

Description:
Black Coating Machined Logo, 69.1mm Mount Spacing, Front, Left
Item Summary

Caliper body CNC machined
Black anodizing treatment with re-machined Brembo Logo
Standard Custom fixing and off-set
Complete with sintered pads;
About the Product
Technical Specifications

Position: Front
Caliper Body: 2-piece
Fixing: Axial
Number of Pistons: 4
Disc Height: 32/34/46mm
Piston Diameter: 32mm
Bridges: 3
Pad Shape C
Includes Pads: Yes
Construction Material: CNC aluminum
Finishing: Hard Anodized
Weight (without pads): 845gr
Brake Fluid: DOT4
Hardware: Steel
Pistons: Aluminum
Center to Center: 69.1mm
Offet: 34.1mm
Spare Parts

Banjo Bolt
Bleeding Screw
Spring
Thermotapes 88-127 degrees
Thermotapes 132-171 degrees
Brake Pads

Geniuine: 107988210
Z03 Sintered Endurance: 107A48669
Z04 Sintered: 107A48639
Item #: 120B81471
Condition: New
Ships within 24-48 hours. Please note supply-chain related delays are possible. We will contact you with an ETA once your order has been processed
Price: $759.00

Qty:

Description:
100mm Radial Mount Spacing, Monoblock Billet, Front, Right, Nickel


Designed for track enthusiasts and those who seek something truly innovative from the calipers fitted to their bikes, the Brembo GP4-MS is inspired by the monobloc caliper developed for MotoGP - now available to the general public.
Equipped with four 30 mm diameter pistons, the Brembo GP4-MS caliper redefines the rules for road calipers. Its performance comes close to that of the versions used in the most important motorbike competitions in the world, thanks to the combination of all the distinctive features of Brembo calipers used in the MotoGP sector - such as monobloc technology, machining from solid, nickel surface finishing and design with topological optimisation.
The GP4-MS caliper shares the styling of Brembo Racing calipers of the future, with the aim of optimising rigidity and ensuring low weight.
Just like Brembo calipers used in MotoGP and Superbike World Championships, the innovative GP4-MS caliper - for bikes with 100mm centres - is manufactured from aluminium machined from a solid block.
Compared to braking components manufactured by casting, machining from solid allows the use of materials with better mechanical characteristics, greater resistance to high temperatures and, consequently, improvements to the performance of the entire braking system.
Unlike models in the previous GP4 range, the Brembo GP4-MS combines machining from solid with monobloc technology, i.e. the use of a single block of aluminium – offering a new design choice for motorcycle calipers in road applications.
This process was achieved by perfecting the use of topological optimisers, software derived from 40 years of Brembo victories in the premier World Championship class. This computer program has made it possible to optimise the shape of the caliper body. The entire process ensures exceptional rigidity, unprecedented lightness and less deformation at high temperatures.
In common with its competition calipers, the Brembo GP4-MS also has nickel surface finishing. In addition to attractive styling, this process has made it possible to comply with strict manufacturing tolerances, to the benefit of performance and operating precision. By fitting a double seal, one inside the piston and one acting as a dust cover, the Brembo caliper ensures maximum on-road freedom without the need for the regular checks characteristic of racing calipers.
The Brembo GP4-MS caliper kit also includes high performance sintered pads - the top choice for mixed road/track use - plus all the small parts needed for assembly and related instructions. The kit also includes the eye-catching heat-sensitive adhesive stickers used in the MotoGP world to assess the operating temperature reached by the calipers after each session. The Brembo GP4-MS caliper is compatible with the Brembo Racing Z04 pads used in the World Superbike, Supersport and Moto2 Championships.
Item #: 20D60020
Condition: New
Not Available
Ships within 24-48 hours. Please note supply-chain related delays are possible. We will contact you with an ETA once your order has been processed

Description:
32/37, 7835425, Front, Right, Nickel


Item Summary
108mm center to center
Billet Caliper
Right caliper only
Nickel Cadmium Finish
Racing discs only must be used !
About the Product
Specifications

Fixing Dimensions: 108mm
Position: Front
Caliper body: Monobloc
Fixing: Radial
Pistons:4
Piston Diameters: 32mm-36mm
Disc Height:30mm
Material:B.AL
Surface Protection: NI
Bridges: 3
Hardware Material: TI
Piston Material: TI
Weight w/o Pads: 630g
Pad Shape: Q
Pads Included: NO
Offset: 21mm
Brake Fluid: DOT 4
21mm off-set à standard offset for 108mm calipers is 22,5mm; this means that it must be used a spacer of 1,5mm between wheel hub and disk
Racing discs only must be used
Spare Parts

Bleed Screw Cover: 05150220
Bleeding Screw: 05281213
Thermotapes 88-127c: 02516811
Thermotapes 132-171c: 02516812
Brake Pads

Z03: 07A02310 or 07A02120
Z04: 07835424 (to be purchased separately)
Item #: XB6E511
Condition: New
Please Call for Availability
Ships within 24-48 hours. Please note supply-chain related delays are possible. We will contact you with an ETA once your order has been processed

Call For Price: 877-447-8696
Description:
32/36, 7835424, Front, Left, Nickel


Item Summary
108mm center to center
Billet Caliper
Right caliper only
Nickel Cadmium Finish
Racing discs only must be used !
About the Product
Specifications

Fixing Dimensions: 108mm
Position: Front
Caliper body: Monobloc
Fixing: Radial
Pistons:4
Piston Diameters: 32mm-36mm
Disc Height:30mm
Material:B.AL
Surface Protection: NI
Bridges: 3
Hardware Material: TI
Piston Material: TI
Weight w/o Pads: 630g
Pad Shape: Q
Pads Included: NO
Offset: 21mm
Brake Fluid: DOT 4
21mm off-set à standard offset for 108mm calipers is 22,5mm; this means that it must be used a spacer of 1,5mm between wheel hub and disk
Racing discs only must be used
Spare Parts

Bleed Screw Cover: 05150220
Bleeding Screw: 05281213
Thermotapes 88-127c: 02516811
Thermotapes 132-171c: 02516812
Brake Pads

Z03: 07A02310 or 07A02120
Z04: 07835424 (to be purchased separately)
Item #: XB6E510
Condition: New
Please Call for Availability
Ships within 24-48 hours. Please note supply-chain related delays are possible. We will contact you with an ETA once your order has been processed

Call For Price: 877-447-8696
Description:
100mm Mount Spacing, P4 34mm Pistons, Front, Left, Fluorescent Yellow


Find Brembo Racing Caliper, M4 Left, Radial Mount, Cast, Monobloc, 100mm Mount Spacing, P4 34mm Pistons, Front, Left, Fluorescent Yellow
and other parts you need at hhrperformance.com - HHR Performance, Sandpoint, Idaho
Item #: 120988583
Condition: New
Not Available
Ships within 24-48 hours. Please note supply-chain related delays are possible. We will contact you with an ETA once your order has been processed

Description:
100mm Mount Spacing, P4 34mm Pistons, Front, Right, Fluorescent Yellow


Find Brembo Racing Caliper, M4 Right, Radial Mount, Cast, Monobloc, 100mm Mount Spacing, P4 34mm Pistons, Front, Right, Fluorescent Yellow and other parts you need at hhrperformance.com - HHR Performance, Sandpoint, Idaho
Item #: 120988584
Condition: New
Not Available
Ships within 24-48 hours. Please note supply-chain related delays are possible. We will contact you with an ETA once your order has been processed

Description:
2-Piece , 64mm Mount Spacing, Rear, Hard Anodized


It is a small and extremely lightweight racing caliper designed specifically for riders who use the rear brake moderately.
This caliper is in two pieces and is made entirely from billet. This machining, which uses sophisticated numerically controlled equipment, provides maximum stiffness and lightweight values which are reflected in its absolutely excellent performance.
Inside it houses two 24 mm diameter pistons. The caliper should be hand mounted and the screw tightening torque should be objectivated. To be mounted this caliper requires a specific adaptor bracket.
This caliper is used with excellent performance on all Super Sport bikes and racing bikes such as those raced in Moto2, Moto3 and MotoGP. It has also become increasingly popular in Southeast Asia where it is used as a front brake in “underbone” category competitions where the engine is positioned under the frame. Questa pinza richiede l'utilizzo di un disco posteriore con fascia frenante da 24 mm.
This Component is designed and manufactured to be used exclusively in racing competitions and, therefore, the product shall be installed through specific adaptors not included in the packaging of the component and by highly qualified and competent professionals working in the “racing” field. Please contact our distributor for any further clarification.
Item #: X206001
Condition: New
Ships within 24-48 hours. Please note supply-chain related delays are possible. We will contact you with an ETA once your order has been processed
Price: $939.00

Qty:

Description: Two-piece rear caliper, entirely from billet created to provide maximum racing performance. The billet machining, which uses sophisticated numerically controlled equipment, provides maximum stiffness and lightweight values which are reflected in its absolutely excellent performance.
The caliper body houses two 30 mm diameter pistons. The pistons and mounting bolting are titanium. To be mounted this caliper requires a specific adaptor bracket.
The embossed and hand painted Brembo logo is located prominently on the side.
This caliper can be used with rear discs that have either a 24 mm or 30 mm rotor.
This Component is designed and manufactured to be used exclusively in racing competitions and, therefore, the product shall be installed through specific adaptors not included in the packaging of the component and by highly qualified and competent professionals working in the “racing” field. Please contact our distributor for any further clarification.
Item #: XA1J040
Condition: New
Please Call for Availability
Ships within 24-48 hours. Please note supply-chain related delays are possible. We will contact you with an ETA once your order has been processed

Call For Price: 877-447-8696
Description:
64mm Mount Spacing, Rear


Two-piece rear caliper, entirely from billet created to provide maximum racing performance. The billet machining, which uses sophisticated numerically controlled equipment, provides maximum stiffness and lightweight values which are reflected in its absolutely excellent performance.
The caliper body houses two 34 mm diameter pistons. The pistons and mounting bolting are titanium. To be mounted this caliper requires a specific adaptor bracket.
The embossed and hand painted Brembo logo is located prominently on the side.
This caliper can be used with rear discs that have either a 24 mm or 30 mm rotor.
This Component is designed and manufactured to be used exclusively in racing competitions and, therefore, the product shall be installed through specific adaptors not included in the packaging of the component and by highly qualified and competent professionals working in the “racing” field. Please contact our distributor for any further clarification.
Item #: X988870
Condition: New
Please Call for Availability
Ships within 24-48 hours. Please note supply-chain related delays are possible. We will contact you with an ETA once your order has been processed

Call For Price: 877-447-8696
Description:
60mm Mount Spacing, Front, Left


Item Summary
60mm spacing
Left caliper only
About the Product
Specifications

Fixing Dimensions: 60mm
Position: Front
Caliper body: Monobloc
Fixing: Radial
Pistons: 2
Piston Diameter: 34mm
Disc Height: 30mm
Material: B.AL
Surface Protection: HA
Bridges: 2
Hardware Material: ST
Piston Material: AL
Weight w/o Pads: 320g
Pad Shape: R
Pads Included: NO
Ofset: 20.5mm
Brake Fluid: DOT 4
Spare Parts

Bleed Screw Cover: 105150210
Bleeding Screw: 05281233
Pin: 050454217
Spring: X99C416
Spindle: XA5P405
Thermotapes 88-127c: 02516811
Thermotapes 132-171c: 02516812


Brake Pads

Z04: 107A48604
H38: 00787427
Item #: XA88820
Condition: New
Please Call for Availability
Ships within 24-48 hours. Please note supply-chain related delays are possible. We will contact you with an ETA once your order has been processed

Call For Price: 877-447-8696
Description: Item Summary
60mm spacing
2 pistons
30mm piston diameter
Item #: XA88810
Condition: New
Ships within 24-48 hours. Please note supply-chain related delays are possible. We will contact you with an ETA once your order has been processed
Price: $1,799.00

Qty:

Description: Item Summary
60mm spacing
2 pistons
30mm piston diameter
Item #: XA88811
Condition: New
Ships within 24-48 hours. Please note supply-chain related delays are possible. We will contact you with an ETA once your order has been processed
Price: $1,799.00

Qty:

Description:
60mm Mount Spacing, Front, Right


Item Summary
60mm spacing
Left caliper only
About the Product
Specifications

Fixing Dimensions: 60mm
Position: Front
Caliper body: Monobloc
Fixing: Radial
Pistons: 2
Piston Diameter: 34mm
Disc Height: 30mm
Material: B.AL
Surface Protection: HA
Bridges: 2
Hardware Material: ST
Piston Material: AL
Weight w/o Pads: 320g
Pad Shape: R
Pads Included: NO
Ofset: 20.5mm
Brake Fluid: DOT 4
Spare Parts

Bleed Screw Cover: 105150210
Bleeding Screw: 05281233
Pin: 050454217
Spring: X99C416
Spindle: XA5P405
Thermotapes 88-127c: 02516811
Thermotapes 132-171c: 02516812


Brake Pads

Z04: 107A48604
H38: 00787427
Item #: XA88821
Condition: New
Ships within 24-48 hours. Please note supply-chain related delays are possible. We will contact you with an ETA once your order has been processed
Price: $1,399.00

Qty:

Description:
2-Piece, 64mm Mount Spacing, Rear, Hard Anodized


It is a rather lightweight racing caliper designed specifically for riders who use the rear brake heavily.
This caliper is in two pieces and is made entirely from billet. This machining, which uses sophisticated numerically controlled equipment, provides maximum stiffness and lightweight values which are reflected in its absolutely excellent performance.
Inside it houses four 24 mm diameter pistons. The caliper should be hand mounted and the screw tightening torque should be objectivated. To be mounted this caliper requires a specific adaptor bracket.
With this model an oversize disc can be mounted.
This caliper is used with excellent performance on all Super Sport bikes and racing bikes such as those raced in Moto2, Moto3 and MotoGP. It has also become increasingly popular in Southeast Asia where it is used as a front brake in “underbone” category competitions where the engine is positioned under the frame.
This caliper can be used with rear discs that have either a 24 mm or 30 mm rotor.
This Component is designed and manufactured to be used exclusively in racing competitions and, therefore, the product shall be installed through specific adaptors not included in the packaging of the component and by highly qualified and competent professionals working in the “racing” field. Please contact our distributor for any further clarification.
Item #: X206121
Condition: New
Ships within 24-48 hours. Please note supply-chain related delays are possible. We will contact you with an ETA once your order has been processed
Price: $1,199.00

Qty:

Description:
64mm Mount Spacing, Rear, Hard Anodized


It is a rather lightweight racing caliper designed specifically for riders who use the rear brake heavily.
This caliper is in two pieces and is made entirely from billet. This machining, which uses sophisticated numerically controlled equipment, provides maximum stiffness and lightweight values which are reflected in its absolutely excellent performance.
Inside it houses four 24 mm diameter pistons. The caliper should be hand mounted and the screw tightening torque should be objectivated. To be mounted this caliper requires a specific adaptor bracket.
This caliper is used with excellent performance on all Super Sport bikes and racing bikes such as those raced in Moto2, Moto3 and MotoGP. It has also become increasingly popular in Southeast Asia where it is used as a front brake in “underbone” category competitions where the engine is positioned under the frame. his caliper can be used with rear discs with both 24 mm and 30 mm rotor height.
This Component is designed and manufactured to be used exclusively in racing competitions and, therefore, the product shall be installed through specific adaptors not included in the packaging of the component and by highly qualified and competent professionals working in the “racing” field. Please contact our distributor for any further clarification.
Item #: X206101
Condition: New
Ships within 24-48 hours. Please note supply-chain related delays are possible. We will contact you with an ETA once your order has been processed
Price: $1,099.00

Qty:

Description:
108mm Mount Spacing, Front, Right


Find Brembo Racing Caliper, P4.30/34 Endurance, Radial Mount, 108mm Mount Spacing, Front, Right and other parts you need at hhrperformance.com - HHR Performance, Sandpoint, Idaho
Item #: XB3K551
Condition: New
Please Call for Availability
Ships within 24-48 hours. Please note supply-chain related delays are possible. We will contact you with an ETA once your order has been processed

Call For Price: 877-447-8696
Description:
100mm Mount Spacing, Front, Left


This caliper, made specifically for motard applications, is characterised by a caliper body made entirely from billet and consisting in two mechanically connected pieces.
Particular attention was dedicated to finding high braking power and stiffness values, obtained tanks to painstaking design, the use of carefully selected raw materials and ultra modern metal machining technology discoveries.
This caliper has 4 pistons with 30 and 34 mm differentiated diameter, whereas the caliper body finish is done with a hard oxidation treatment.
This Component is designed and manufactured to be used exclusively in racing competitions and, therefore, the product shall be installed through specific adaptors not included in the packaging of the component and by highly qualified and competent professionals working in the “racing” field. Please contact our distributor for any further clarification.
Item #: XA78910
Condition: New
Ships within 24-48 hours. Please note supply-chain related delays are possible. We will contact you with an ETA once your order has been processed
Price: $759.00

Qty:

Description:
100mm Mount Spacing, Front, Right


This caliper, made specifically for motard applications, is characterised by a caliper body made entirely from billet and consisting in two mechanically connected pieces.
Particular attention was dedicated to finding high braking power and stiffness values, obtained tanks to painstaking design, the use of carefully selected raw materials and ultra modern metal machining technology discoveries.
This caliper has 4 pistons with 30 and 34 mm differentiated diameter, whereas the caliper body finish is done with a hard oxidation treatment.
This Component is designed and manufactured to be used exclusively in racing competitions and, therefore, the product shall be installed through specific adaptors not included in the packaging of the component and by highly qualified and competent professionals working in the “racing” field. Please contact our distributor for any further clarification.
Item #: XA78911
Condition: New
Ships within 24-48 hours. Please note supply-chain related delays are possible. We will contact you with an ETA once your order has been processed
Price: $759.00

Qty:

Description:
108mm Mount Spacing, Front, Left


Item Summary
108mm Spacing
About the Product
XA69510: radial brake caliper Brembo P4 30/34 CNC for 35 mm brake area, 108 mm Supermoto

Mounting hole spacing of 108 mm by 22.5 mm offset. Specifically for Supermoto use the new Brembo radial-developed CNC machined, two-piece racing brake calipers on 108 mm hole spacing. Extremely robust and powerful brake caliper with a very good price / performance ratio.



Order no.: XA69510 (brake caliper behind the left leg, without lining)

Technical Specifications

Position: Front
Caliper Cody: 2-piece
Number of Pistons: 4
Disc Height: 32-34mm
Piston Diameter: 30/34mm
Construction Material: CNC aluminum
Finishing: Hard Anodized
Weight: 610gr
Hardware: Steel
Pistons: aluminum
Center to Center: 108mm
Offset: 22.5mm
Fixing: Radial
Bridges: 2
Pad Shape: M
Pads Included: No
Brake Fluid: DOT4
Spare Parts

Bleed Screw Cover
Bleeding Screw
Pin
Spindle
Thermotapes 88-127 degrees
Thermotapes 132-171 degrees
Brake Pads

Genuine: 107670821
Z03 Sintered Endurance: 107A48674
Z04 Sintered: 107670823
Item #: XA69510
Condition: New
Ships within 24-48 hours. Please note supply-chain related delays are possible. We will contact you with an ETA once your order has been processed
Price: $699.00

Qty:

Description:
108mm Mount Spacing, Front, Right


Item Summary
108mm Spacing
About the Product
XA69511: radial brake caliper Brembo P4 30/34 CNC 108 mm Supermoto for 35 mm brake area, right side

Mounting hole spacing of 108 mm by 22.5 mm offset. Specifically for Supermoto use the new Brembo radial-developed CNC machined, two-piece racing brake calipers on 108 mm hole spacing. Extremely robust and powerful brake caliper with a very good price / performance ratio.



Order no.: XA69511 (brake caliper behind the right leg, without brake pads)

Technical Specifications

Position: Front
Caliper Cody: 2-piece
Number of Pistons: 4
Disc Height: 32-34mm
Piston Diameter: 30/34mm
Construction Material: CNC aluminum
Finishing: Hard Anodized
Weight: 610gr
Hardware: Steel
Pistons: aluminum
Center to Center: 108mm
Offset: 22.5mm
Spare Parts

Bleed Screw Cover
Bleeding Screw
Pin
Spindle
Thermotapes 88-127 degrees
Thermotapes 132-171 degrees
Brake Pads

107670821
07BB1973
RC Compound: 07BB19RC
Z04 Compound: 107670823
Item #: XA69511
Condition: New
Ships within 24-48 hours. Please note supply-chain related delays are possible. We will contact you with an ETA once your order has been processed
Price: $699.00

Qty:

Description: The body of this caliper is made entirely from billet and consists in two mechanically connected pieces. Particular attention was dedicated to finding high braking power and stiffness values, obtained tanks to painstaking design, the use of carefully selected raw materials and ultra modern metal machining technology discoveries.
In addition to reducing the overall weight, the titanium pistons and mounting bolting guarantees better thermal insulation, contributing to less overheating of the caliper. This caliper has 4 pistons with 32 and 36 mm differentiated diameter which ensure extraordinary braking power. The caliper body is finished with a hard oxidation treatment.
This Component is designed and manufactured to be used exclusively in racing competitions and, therefore, the product shall be installed through specific adaptors not included in the packaging of the component and by highly qualified and competent professionals working in the “racing” field. Please contact our distributor for any further clarification.
Item #: XA3B830
Condition: New
Ships within 24-48 hours. Please note supply-chain related delays are possible. We will contact you with an ETA once your order has been processed
Price: $1,469.00

Qty:

Description: The body of this caliper is made entirely from billet and consists in two mechanically connected pieces. Particular attention was dedicated to finding high braking power and stiffness values, obtained tanks to painstaking design, the use of carefully selected raw materials and ultra modern metal machining technology discoveries.
In addition to reducing the overall weight, the titanium pistons and mounting bolting guarantees better thermal insulation, contributing to less overheating of the caliper. This caliper has 4 pistons with 32 and 36 mm differentiated diameter which ensure extraordinary braking power. The caliper body is finished with a hard oxidation treatment.
This Component is designed and manufactured to be used exclusively in racing competitions and, therefore, the product shall be installed through specific adaptors not included in the packaging of the component and by highly qualified and competent professionals working in the “racing” field. Please contact our distributor for any further clarification.
Item #: XA3B860
Condition: New
Ships within 24-48 hours. Please note supply-chain related delays are possible. We will contact you with an ETA once your order has been processed
Price: $949.00

Qty:

Description: The body of this caliper is made entirely from billet and consists in two mechanically connected pieces. Particular attention was dedicated to finding high braking power and stiffness values, obtained tanks to painstaking design, the use of carefully selected raw materials and ultra modern metal machining technology discoveries.
In addition to reducing the overall weight, the titanium pistons and mounting bolting guarantees better thermal insulation, contributing to less overheating of the caliper. This caliper has 4 pistons with 32 and 36 mm differentiated diameter which ensure extraordinary braking power. The caliper body is finished with a hard oxidation treatment.
This Component is designed and manufactured to be used exclusively in racing competitions and, therefore, the product shall be installed through specific adaptors not included in the packaging of the component and by highly qualified and competent professionals working in the “racing” field. Please contact our distributor for any further clarification.
Item #: XA3B831
Condition: New
Ships within 24-48 hours. Please note supply-chain related delays are possible. We will contact you with an ETA once your order has been processed
Price: $1,469.00

Qty:

Description: The body of this caliper is made entirely from billet and consists in two mechanically connected pieces. Particular attention was dedicated to finding high braking power and stiffness values, obtained tanks to painstaking design, the use of carefully selected raw materials and ultra modern metal machining technology discoveries.
In addition to reducing the overall weight, the titanium pistons and mounting bolting guarantees better thermal insulation, contributing to less overheating of the caliper. This caliper has 4 pistons with 32 and 36 mm differentiated diameter which ensure extraordinary braking power. The caliper body is finished with a hard oxidation treatment.
This Component is designed and manufactured to be used exclusively in racing competitions and, therefore, the product shall be installed through specific adaptors not included in the packaging of the component and by highly qualified and competent professionals working in the “racing” field. Please contact our distributor for any further clarification.
Item #: XA3B861
Condition: New
Ships within 24-48 hours. Please note supply-chain related delays are possible. We will contact you with an ETA once your order has been processed
Price: $949.00

Qty:

Description:
Radial Mount, 108mm Mount Spacing, Front, Left, Hard Anodized


Monoblock caliper, strictly racing, machined entirely from billet thanks to the use of numerically controlled equipment. The extremely low weight, just 649 grams without brake pads, and the use of titanium mounting bolting and pistons make it one of the best performing calipers in the entire Brembo range. The hydraulics were the focus of a careful fine-tuning. The use of four 32 and 36 mm differentiated diameter pistons allowed a further increase in braking power and modularity specifications.
The Brembo monoblock calipers made from billet are derived from Brembo’s great experience in racing which, crossing over into each phase of the production process, has allowed the mass/stiffness ratio and braking performance to be increased. These calipers contribute to the highest performance possible with a bike caliper and are the result of precise design calculations, as well as the use of the most advanced metal machining technologies available.
For this type of caliper we recommend the use of a “low strip” brake disc. For more information contact your local distributor.
This Component is designed and manufactured to be used exclusively in racing competitions and, therefore, the product shall be installed through specific adaptors not included in the packaging of the component and by highly qualified and competent professionals working in the “racing” field. Please contact our distributor for any further clarification.
Item #: X973760
Condition: New
Ships within 24-48 hours. Please note supply-chain related delays are possible. We will contact you with an ETA once your order has been processed
Price: $2,399.00

Qty:

Description:
Radial Mount, 108mm Mount Spacing, Front, Right, Hard Anodized


Monoblock caliper, strictly racing, machined entirely from billet thanks to the use of numerically controlled equipment. The extremely low weight, just 649 grams without brake pads, and the use of titanium mounting bolting and pistons make it one of the best performing calipers in the entire Brembo range. The hydraulics were the focus of a careful fine-tuning. The use of four 32 and 36 mm differentiated diameter pistons allowed a further increase in braking power and modularity specifications.
The Brembo monoblock calipers made from billet are derived from Brembo’s great experience in racing which, crossing over into each phase of the production process, has allowed the mass/stiffness ratio and braking performance to be increased. These calipers contribute to the highest performance possible with a bike caliper and are the result of precise design calculations, as well as the use of the most advanced metal machining technologies available.
For this type of caliper we recommend the use of a “low strip” brake disc. For more information contact your local distributor.
This Component is designed and manufactured to be used exclusively in racing competitions and, therefore, the product shall be installed through specific adaptors not included in the packaging of the component and by highly qualified and competent professionals working in the “racing” field. Please contact our distributor for any further clarification.
Item #: X973761
Condition: New
Ships within 24-48 hours. Please note supply-chain related delays are possible. We will contact you with an ETA once your order has been processed
Price: $2,399.00

Qty:

Description:
Monobloc, 108mm Mount Spacing, Front, Left, Nickel


Item Summary
108mm center to center
34/38mm Pistons
Nickel finish
Left side caliper only
About the Product
108mm center to center
34/38mm Pistons
Nickel finish
Left side caliper only
2014 / 2015 Monobloc brake caliper for Moto 2 / Superbike / MotoGP for Racingdiscs (30 mm discs)!
Latest MotoGP - design 2014 / 2015 with lateral fixing for brake hose!

P4 34/38 CNC Radial Monobloc - brake caliper 108 mm
Brembo Racing Pure, (ideal for 30 mm brake ring)

Specifications

Fixing Diameter: 108mm
Position: Front
Caliper Body: Monobloc
Fixing: Radial
Pistons: 4
Piston Diameter: 34-38mm
Disc Height: 30mm
Material: B.AL
Surface Finish: NI
Bridges: 3
Hardware Material: TI
Piston Material: TI
Weight w/o Pads: 615g
Pad Shape: Q
Pads Included: NO
Offset: 22.5mm
Brake Fluid: DOT 4
Brake Pads

Z03 Sintered Endurance: 07A02310 or 07A02320
Z04 Sintered: 07835424
Item #: XA8D1E0
Condition: New
Ships within 24-48 hours. Please note supply-chain related delays are possible. We will contact you with an ETA once your order has been processed
Price: $3,799.00

Qty:

Description:
108mm Mount Spacing, Front, Left, Nickel


Monoblock caliper, strictly racing, machined entirely from billet thanks to the use of numerically controlled equipment. The extremely low weight, just 640 grams without brake pads, and the use of titanium mounting bolting and pistons places this caliper at the absolute top of its class in performance in the Brembo range. The hydraulics were the focus of a careful fine-tuning and, thanks to the use of 4 pistons with 34 and 38 mm differentiated diameter, allow unparalleled braking power to be unleashed.
The Brembo monoblock calipers made from billet are derived from Brembo’s great experience in racing which, crossing over into each phase of the production process, has allowed the mass/stiffness ratio and braking performance to be increased. These calipers contribute to the highest performance possible with a bike caliper and are the result of precise design calculations, as well as the use of the most advanced metal machining technologies available.
This model uses a special surface finish borrowed from MotoGP: The nickel plating allowed the calipers to be taken to new performance levels thanks to further restrictions on the machining tolerances.
For this type of caliper we recommend the use of a “low strip” brake disc. For more information contact your local distributor.
This Component is designed and manufactured to be used exclusively in racing competitions and, therefore, the product shall be installed through specific adaptors not included in the packaging of the component and by highly qualified and competent professionals working in the “racing” field. Please contact our distributor for any further clarification.
Item #: XA3J7F0
Condition: New
Ships within 24-48 hours. Please note supply-chain related delays are possible. We will contact you with an ETA once your order has been processed
Price: $2,899.00

Qty:

Description:
Monobloc, 108mm Mount Spacing, Front, Right, Nickel


Item Summary
108mm center to center
34/38mm Pistons
Nickel finish
Right side caliper only
About the Product
108mm center to center
34/38mm Pistons
Nickel finish
Right side caliper only
2014 / 2015 Monobloc brake caliper for Moto 2 / Superbike / MotoGP for Racingdiscs (30 mm discs)!
Latest MotoGP - design 2014 / 2015 with lateral fixing for brake hose!

P4 34/38 CNC Radial Monobloc - brake caliper 108 mm
Brembo Racing Pure, (ideal for 30 mm brake ring)

Specifications

Fixing Diameter: 108mm
Position: Front
Caliper Body: Monobloc
Fixing: Radial
Pistons: 4
Piston Diameter: 34-38mm
Disc Height: 30mm
Material: B.AL
Surface Finish: NI
Bridges: 3
Hardware Material: TI
Piston Material: TI
Weight w/o Pads: 615g
Pad Shape: Q
Pads Included: NO
Offset: 22.5mm
Brake Fluid: DOT 4
Brake Pads

Z03 Sintered Endurance: 07A02310 or 07A02320
Z04 Sintered: 07835424
Item #: XA8D1E1
Condition: New
Ships within 24-48 hours. Please note supply-chain related delays are possible. We will contact you with an ETA once your order has been processed
Price: $3,799.00

Qty:

Description:
108mm Mount Spacing, Front, Right, Nickel


Monoblock caliper, strictly racing, machined entirely from billet thanks to the use of numerically controlled equipment. The extremely low weight, just 640 grams without brake pads, and the use of titanium mounting bolting and pistons places this caliper at the absolute top of its class in performance in the Brembo range. The hydraulics were the focus of a careful fine-tuning and, thanks to the use of 4 pistons with 34 and 38 mm differentiated diameter, allow unparalleled braking power to be unleashed.
The Brembo monoblock calipers made from billet are derived from Brembo’s great experience in racing which, crossing over into each phase of the production process, has allowed the mass/stiffness ratio and braking performance to be increased. These calipers contribute to the highest performance possible with a bike caliper and are the result of precise design calculations, as well as the use of the most advanced metal machining technologies available.
This model uses a special surface finish borrowed from MotoGP: The nickel plating allowed the calipers to be taken to new performance levels thanks to further restrictions on the machining tolerances.
For this type of caliper we recommend the use of a “low strip” brake disc. For more information contact your local distributor.
This Component is designed and manufactured to be used exclusively in racing competitions and, therefore, the product shall be installed through specific adaptors not included in the packaging of the component and by highly qualified and competent professionals working in the “racing” field. Please contact our distributor for any further clarification.
Item #: XA3J7F1
Condition: New
Ships within 24-48 hours. Please note supply-chain related delays are possible. We will contact you with an ETA once your order has been processed
Price: $2,899.00

Qty:

Description: Item Summary
26mm pistons
Rear Caliper
For Off-Road applications
About the Product
Technical Specifications

Center to Center: 119mm (bracket)
Position: Rear
Caliper Body: Floating
Fixing: Axial + Bracket
Number of Pistons: 1
Piston Size: 26mm
Disc Height: 31mm
Material: Billet Aluminum
Finishing: Hard Anodizing
Hardware: Steel
Pistons: Aluminum
Weight (w/o pads): 595gr
Pad Shape: Z
Pads Included: Yes
Brake Fluid: DOT4
Spare Parts

Banjo Bolt
Bleeding Screw
Rubber Bellow Kit
Spring & Blade Kit
Spindle & Pin Kit
Thermotapes 88-127 degrees
Thermotapes 132-171 degrees
Brake Pads

OE Compound: 07849312 and 07849327
Item #: XQ21390
Condition: New
Ships within 24-48 hours. Please note supply-chain related delays are possible. We will contact you with an ETA once your order has been processed
Price: $859.00

Qty:

Description: Item Summary
CNC Caliper
28mm pistons
About the Product
Technical Specifications
Center to Center: 95mm (for bracket)
Position: Front
Caliber Body: Floating
Fixing: Axial + Bracket
Number of Pistons: 2
Disc Height: 28mm
Piston Diameter: 28mm
Construction Material: CNC Aluminum
Finishing: Hard Anodized
Weight: 595gr
Pad Shape: V
Pads Included: Yes
Offset: 17.7mm-17.95mm
Brake Fluid: DOT4
Hardware: Steel
Pistons: aluminum
Spare Parts

Bleeding Screw
Rubber Bellow Kit
Spring & Blade Kit
Thermotapes 88-127 degrees
Thermotape 132-171 degrees
Brake Pads

OE Compound: 107861750
Z04 Compound: 107A48646
Item #: XQ21361
Condition: New
Ships within 24-48 hours. Please note supply-chain related delays are possible. We will contact you with an ETA once your order has been processed
Price: $899.00

Qty:

Description: This caliper, made in two pieces by means of casting, concentrates the most advanced casting and machining technologies to obtain an ultra lightweight end product with stiffness and operating precision values capable of providing excellent performance.
The caliper body houses two 34 mm diameter pistons. The caliper has sintered brake pads which represent the best of what is currently available on the market and it bears a laser machined Brembo logo.
The product was created specifically by Brembo to meet the needs of enthusiasts looking for the right balance between excellent performance and a reasonable price.
Item #: 120B27810
Condition: New
Ships within 24-48 hours. Please note supply-chain related delays are possible. We will contact you with an ETA once your order has been processed
Price: $175.00

Qty:

Description: Caliper in two pieces made entirely from billet. This machining, which uses sophisticated numerically controlled equipment, provides maximum stiffness and lightweight values which are reflected in its excellent performance.
The caliper body houses two 34 mm diameter pistons. Particular attention was dedicated to achieving optimum braking control even in poor grip conditions due to any lightening of the rear wheel during the braking phase. The caliper has sintered brake pads which represent the best of what is currently available on the market.
The caliper is oxidized black and is marked with the production batch for immediate traceability, as well as the embossed and hand painted Brembo logo.
Item #: 120A44130
Condition: New
Ships within 24-48 hours. Please note supply-chain related delays are possible. We will contact you with an ETA once your order has been processed
Price: $525.00

Qty:

Description: Caliper in two pieces made entirely from billet. This machining, which uses sophisticated numerically controlled equipment, provides maximum stiffness and lightweight values which are reflected in its excellent performance.
The caliper body houses two 34 mm diameter pistons. Particular attention was dedicated to achieving optimum braking control even in poor grip conditions due to any lightening of the rear wheel during the braking phase. The caliper has sintered brake pads which represent the best of what is currently available on the market.
The caliper is hard oxidised like the ones used on racing bikes, providing further protection. The caliper is marked with the production batch for immediate traceability, as well as the embossed and hand painted Brembo logo.
Item #: 120A44110
Condition: New
Ships within 24-48 hours. Please note supply-chain related delays are possible. We will contact you with an ETA once your order has been processed
Price: $495.00

Qty:

Description: Caliper in two pieces made entirely from billet. This machining, which uses sophisticated numerically controlled equipment, provides maximum stiffness and lightweight values which are reflected in its excellent performance.
The caliper body houses two 34 mm diameter pistons. Particular attention was dedicated to achieving optimum braking control even in poor grip conditions due to any lightening of the rear wheel during the braking phase. The caliper has sintered brake pads which represent the best of what is currently available on the market.
The caliper is oxidized black and is marked with the production batch for immediate traceability, as well as the embossed and hand painted Brembo logo.
Item #: 120A44140
Condition: New
Ships within 24-48 hours. Please note supply-chain related delays are possible. We will contact you with an ETA once your order has been processed
Price: $595.00

Qty:

Description:
CNC, 100mm Mount Spacing


The new Brembo “.484” caliper aims to meet the needs of those who want to improve their braking system performance, giving the bike a strong Café Racer connotation.
This new caliper is made entirely from billet, starting with a block of aluminium machined with the most modern Cam technologies available. The two semi-calipers are then joined with three steel screws located within the wheel side. The caliper body houses four 32 mm diameter pistons.
The name “.484” is derived from the displacement of an individual caliper piston measured in cubic inches, typical of the VTwin market. This caliper uses radial mounting technology in order to guarantee maximum operating precision. The brake pads slide in specific guides, machined onto the body of the caliper itself, which allow brake pad pins to be eliminated.
Finishing of the caliper is obtained with an anthracite black hard oxidation treatment, whereas the big Brembo logo, in its characteristic red colour, is placed at the top of the piston on the disc entry side. The pair of calipers comes in a kit that includes: pre-mounted sintered brake pads, specific instruction sheet and a pair of Brembo stickers.
Item #: 220B47310
Condition: New
Ships within 24-48 hours. Please note supply-chain related delays are possible. We will contact you with an ETA once your order has been processed
Price: $1,499.00

Qty:

Description:
CNC, 108mm Mount Spacing


The new Brembo “.484” caliper aims to meet the needs of those who want to improve their braking system performance, giving the bike a strong Café Racer connotation.
This new caliper is made entirely from billet, starting with a block of aluminium machined with the most modern Cam technologies available. The two semi-calipers are then joined with three steel screws located within the wheel side. The caliper body houses four 32 mm diameter pistons.
The name “.484” is derived from the displacement of an individual caliper piston measured in cubic inches, typical of the VTwin market. This caliper uses radial mounting technology in order to guarantee maximum operating precision. The brake pads slide in specific guides, machined onto the body of the caliper itself, which allow brake pad pins to be eliminated.
Finishing of the caliper is obtained with an anthracite black hard oxidation treatment, whereas the big Brembo logo, in its characteristic red colour, is placed at the top of the piston on the disc entry side. The pair of calipers comes in a kit that includes: pre-mounted sintered brake pads, specific instruction sheet and a pair of Brembo stickers.
Item #: 220B47320
Condition: New
Ships within 24-48 hours. Please note supply-chain related delays are possible. We will contact you with an ETA once your order has been processed
Price: $1,499.00

Qty:

Description:
CNC Caliper, Axial Mount, CNC


Item Summary
Specific billet0machined caliper bracket.
4 piston calipers
2 x 30mm pistons, 2 x 34mm pistons
About the Product
CNC bracket black hard anodized with Brembo Racing laer marked logo.

To be used with original brake disc.

Original brake M/C has to be replaced with Brembo PS16 or radial 19mm.

Technical Specifications

Cente to Center: 100mm (bracket)
Position: Front
Caliper Body: 2-pieces
Fixing: Axial + Bracket
Pistons: 4
Piston Size: 30/34mm
Disc Height: 32-34mm
Material: Billet Aluminum
Finishing: Hard Anodizing
Bridges: 2
Hardware: Steel
Pistons: Aluminum
Weight (w/o pads): 580gr
Pad Shape: D
Pads Included: Yes
Offset: 26.5mm
Brake Fluid: DOT4
Spare Parts

Bleed Screw Cover
Bleeding Screw
Pin
Spindle
Thermotapes 88-127 degrees
Thermotapes 132-171 degrees
Brake Pads

Genuine: 107442650
Z03: 107A48673
Z04 Compound: 107A48653
Item #: 220B76510
Condition: New
Ships within 24-48 hours. Please note supply-chain related delays are possible. We will contact you with an ETA once your order has been processed
Price: $1,199.00

Qty:

Description:
OES Caliper, Axial Mount, CNC


Item Summary
Specific billet machined caliper bracket.
4 piston calipers
2 x 30mm pistons, 2 x 34mm pistons
About the Product
CNC bracket black hard anodized with Brembo Racing laser marked logo

To be used with original brake disc.

Original M/C has to be replaced with PS16 or 19mm

Technical Specifications

Center to Center: 100mm
Position: Front
Caliper Body: 2-piece
Fixing: Axial + Bracket
Pistons: 4
Piston Size: 30/34mm
Disc Height: 32-34mm
Material: Cast Aluminum
Finishing: Anodized
Bridges: 2
Hardware: Steel
Pistons: Aluminum
Weight (w/o pads): 700mm
Pad Shape: D
Pads Included: Yes
Offset: 26.5mm
Brake Fluid: DOT4
Spare Parts

Bleed Screw Cover
Bleeding Screw
Pin
Spindle
Thermotapes 88-127 degrees
Thermotapes 132-171 degrees
Brake Pads

Genuine: 107442650
Z03: 107A48673
Z04 Compound: 107A48653
Item #: 220B76610
Condition: New
Ships within 24-48 hours. Please note supply-chain related delays are possible. We will contact you with an ETA once your order has been processed
Price: $499.00

Qty:

Description:
100mm Radail Mount Spacing, Monoclock Billet, Front, Nickel


Designed for track enthusiasts and those who seek something truly innovative from the calipers fitted to their bikes, the Brembo GP4-MS is inspired by the monobloc caliper developed for MotoGP - now available to the general public.
Equipped with four 30 mm diameter pistons, the Brembo GP4-MS caliper redefines the rules for road calipers. Its performance comes close to that of the versions used in the most important motorbike competitions in the world, thanks to the combination of all the distinctive features of Brembo calipers used in the MotoGP sector - such as monobloc technology, machining from solid, nickel surface finishing and design with topological optimisation.
The GP4-MS caliper shares the styling of Brembo Racing calipers of the future, with the aim of optimising rigidity and ensuring low weight.
Just like Brembo calipers used in MotoGP and Superbike World Championships, the innovative GP4-MS caliper - for bikes with 100mm centres - is manufactured from aluminium machined from a solid block.
Compared to braking components manufactured by casting, machining from solid allows the use of materials with better mechanical characteristics, greater resistance to high temperatures and, consequently, improvements to the performance of the entire braking system.
Unlike models in the previous GP4 range, the Brembo GP4-MS combines machining from solid with monobloc technology, i.e. the use of a single block of aluminium – offering a new design choice for motorcycle calipers in road applications.
This process was achieved by perfecting the use of topological optimisers, software derived from 40 years of Brembo victories in the premier World Championship class. This computer program has made it possible to optimise the shape of the caliper body. The entire process ensures exceptional rigidity, unprecedented lightness and less deformation at high temperatures.
In common with its competition calipers, the Brembo GP4-MS also has nickel surface finishing. In addition to attractive styling, this process has made it possible to comply with strict manufacturing tolerances, to the benefit of performance and operating precision. By fitting a double seal, one inside the piston and one acting as a dust cover, the Brembo caliper ensures maximum on-road freedom without the need for the regular checks characteristic of racing calipers.
The Brembo GP4-MS caliper kit also includes high performance sintered pads - the top choice for mixed road/track use - plus all the small parts needed for assembly and related instructions. The kit also includes the eye-catching heat-sensitive adhesive stickers used in the MotoGP world to assess the operating temperature reached by the calipers after each session. The Brembo GP4-MS caliper is compatible with the Brembo Racing Z04 pads used in the World Superbike, Supersport and Moto2 Championships.
Item #: 220D60010
Condition: New
Ships within 24-48 hours. Please note supply-chain related delays are possible. We will contact you with an ETA once your order has been processed
Price: $2,999.00

Qty:

Description:
108mm Mount Spacing


Item Summary
Caliper kit (left and right calipers)
108mm fixing
About the Product
Specifications

Fixing Dimensions: 108mm
Position: front
Caliper Body: Monobloc
Fixing: Radial
Pistons: 4
Piston Diameter: 30mm
Disc Height: 32-34mm
Material: C.AL
Surface Protection: Ti HA
Bridges: 3
Hardware Material: ST
Piston Material: AL
Weight w/o Pads: 935g
Pad Shap: C
Pads Included: YES
Offset: 22.5mm
Brake Fluid: DOT 4
Spare Parts

Bleed Screw Cover: 05150210
Bleeding Screws: 105338752
Spring: 120225579
Thermotapes 88-127c: 02516811
Thermotapes 132-171c: 02516812
Brake Pads

Genuine: 107988210
Z03: 107A48669
Z04: 107A48639
Item #: 220C78310
Condition: New
Ships within 24-48 hours. Please note supply-chain related delays are possible. We will contact you with an ETA once your order has been processed
Price: $799.00

Qty:

Description: The body of this caliper is made entirely from billet and consists in two mechanically connected pieces. Particular attention was dedicated to finding high braking power and stiffness values, obtained tanks to painstaking design, the use of carefully selected raw materials and ultra modern metal machining technology discoveries.
The hydraulics were the focus of a careful fine-tuning. The use of four 32 mm diameter pistons allowed a further increase in braking power and modularity.
This model implements a surface finish borrowed from MotoGP. The nickel plating, in addition to giving it a decidedly attractive look, allowed the already strict machining tolerances to be refined, all to the advantage of performance and operating precision.
The brake pads slide in specific guides, machined onto the body of the caliper itself, which allow brake pad pins to be eliminated.
The Brembo logo is embossed and hand painted in classic Brembo Red. The product, provided in a kit, includes sintered brake pads which represent the absolute best quality available on the market today. The kit also contains an instruction manual, a set of Brembo stickers and extremely useful heat adhesives used in racing to control caliper operating temperature, which are indicative of the product’s racing nature.
Item #: 220B01020
Condition: New
Ships within 24-48 hours. Please note supply-chain related delays are possible. We will contact you with an ETA once your order has been processed
Price: $1,549.00

Qty:

Description: The body of this caliper is made entirely from billet and consists in two mechanically connected pieces. Particular attention was dedicated to finding high braking power and stiffness values, obtained tanks to painstaking design, the use of carefully selected raw materials and ultra modern metal machining technology discoveries.
The hydraulics were the focus of a careful fine-tuning. The use of four 32 mm diameter pistons allowed a further increase in braking power and modularity.
This model implements a surface finish borrowed from MotoGP. The nickel plating, in addition to giving it a decidedly attractive look, allowed the already strict machining tolerances to be refined, all to the advantage of performance and operating precision.
The brake pads slide in specific guides, machined onto the body of the caliper itself, which allow brake pad pins to be eliminated.
The Brembo logo is embossed and hand painted in classic Brembo Red. The product, provided in a kit, includes sintered brake pads which represent the absolute best quality available on the market today. The kit also contains an instruction manual, a set of Brembo stickers and extremely useful heat adhesives used in racing to control caliper operating temperature, which are indicative of the product’s racing nature.
Item #: 220B01010
Condition: New
Ships within 24-48 hours. Please note supply-chain related delays are possible. We will contact you with an ETA once your order has been processed
Price: $1,549.00

Qty:

Description:
Radial Mount, CNC, 130mm Mount Spacing, Nickel


The body of this caliper is made entirely from billet and consists in two mechanically connected pieces. Particular attention was dedicated to finding high braking power and stiffness values, obtained tanks to painstaking design, the use of carefully selected raw materials and ultra modern metal machining technology discoveries.
The hydraulics were the focus of a careful fine-tuning. The use of four 32 mm diameter pistons allowed a further increase in braking power and modularity.
This model implements a surface finish borrowed from MotoGP. The nickel plating, in addition to giving it a decidedly attractive look, allowed the already strict machining tolerances to be refined, all to the advantage of performance and operating precision.
The brake pads slide in specific guides, machined onto the body of the caliper itself, which allow brake pad pins to be eliminated.
The Brembo logo is embossed and hand painted in classic Brembo Red. The product, provided in a kit, includes sintered brake pads which represent the absolute best quality available on the market today. The kit also contains an instruction manual, a set of Brembo stickers and extremely useful heat adhesives used in racing to control caliper operating temperature, which are indicative of the product’s racing nature.
Item #: 220B01130
Condition: New
Ships within 24-48 hours. Please note supply-chain related delays are possible. We will contact you with an ETA once your order has been processed
Price: $1,549.00

Qty:

Description:
Radial Mount, CNC, 100mm Mount Spacing


This product is capable of providing the highest possible performance combined with exceptional reliability. The caliper body, entirely billet, is made up of two mechanically connected pieces and 4 pistons with differentiated diameter, 30 and 34 mm, which further increases the braking power and modularity characteristics.
The anodising surface treatment makes it particularly resistant and able to keep its characteristic racing look unchanged over time.
The Brembo logo is embossed and hand painted in classic Brembo Red. The product, provided in a kit, includes sintered brake pads which represent the absolute best quality available on the market today. The kit also contains an instruction manual, a set of Brembo stickers and extremely useful heat adhesives used in racing to control caliper operating temperature, which are indicative of the product’s racing nature.
Item #: 220A16810
Condition: New
Ships within 24-48 hours. Please note supply-chain related delays are possible. We will contact you with an ETA once your order has been processed
Price: $1,399.00

Qty:

Description:
100mm Mount Spacing, P4 34mm Pistons, Front, Titanium


This monoblock caliper, obtained from a single piece of cast aluminium, is made with the most advanced casting and machining technologies in order to obtain a solid caliper body which is ultra light and has excellent stiffness and precision operating values. The hydraulics were given particular attention, as was the shape of the caliper body, both of which were the focus of technical fine-tuning. The caliper body, which houses four 34 mm diameter pistons, is characterised by significant stiffness values which are obtained thanks to the peculiarity of the triple bridge shape.
With these cast monoblock calipers Brembo makes the technology which has been successfully employed in MotoGP available to all enthusiasts. This is technology which allows the caliper body to be obtained from a single piece of cast aluminium, thereby guaranteeing optimum stiffness.
The surface finish is anodised in titanium colour. The product is provided in a kit made up of two calipers and sintered brake pads which represent the absolute best quality available on the market today.
Item #: 220988530
Condition: New
Ships within 24-48 hours. Please note supply-chain related delays are possible. We will contact you with an ETA once your order has been processed
Price: $699.00

Qty:

Description:
108mm Mount Spacing, P4 34mm Pistons, Front, Titanium


This monoblock caliper, obtained from a single piece of cast aluminium, is made with the most advanced casting and machining technologies in order to obtain a solid caliper body which is ultra light and has excellent stiffness and precision operating values. The hydraulics were given particular attention, as was the shape of the caliper body, both of which were the focus of technical fine-tuning. The caliper body, which houses four 34 mm diameter pistons, is characterised by significant stiffness values which are obtained thanks to the peculiarity of the triple bridge shape.
With these cast monoblock calipers Brembo makes the technology which has been successfully employed in MotoGP available to all enthusiasts. This is technology which allows the caliper body to be obtained from a single piece of cast aluminium, thereby guaranteeing optimum stiffness.
The surface finish is anodised in titanium colour. The product is provided in a kit made up of two calipers and sintered brake pads which represent the absolute best quality available on the market today.
Item #: 220A39710
Condition: New
Not Available
Ships within 24-48 hours. Please note supply-chain related delays are possible. We will contact you with an ETA once your order has been processed

Description:
100mm Mount Spacing, P4 34mm Pistons, Front, Black


This monoblock caliper, obtained from a single piece of cast aluminium, is made with the most advanced casting and machining technologies in order to obtain a solid caliper body which is ultra light and has excellent stiffness and precision operating values. The hydraulics were given particular attention, as was the shape of the caliper body, both of which were the focus of technical fine-tuning. The caliper body, which houses four 34 mm diameter pistons, is characterised by significant stiffness values which are obtained thanks to the peculiarity of the triple bridge shape.
With these cast monoblock calipers Brembo makes the technology which has been successfully employed in MotoGP available to all enthusiasts. This is technology which allows the caliper body to be obtained from a single piece of cast aluminium, thereby guaranteeing optimum stiffness.
The surface finish is anodised in titanium colour. The product is provided in a kit made up of two calipers and sintered brake pads which represent the absolute best quality available on the market today.
Item #: 220988550
Condition: New
Not Available
Ships within 24-48 hours. Please note supply-chain related delays are possible. We will contact you with an ETA once your order has been processed

Items 1-60 of 122