HHR Performance - Inventory Clearance

Description: Dashboard and fairing carrier for OEM dashboard, for BMW S 1000 RR 2019- (K67), aluminium, black anodised, multipiece screwed

Description: Front brake disc 320 x 6 mm EVO, right, for BMW S 1000 RR 2019- (K67), for racing rim aluminum and M-carbon rims, without ABE

Description: Racing subframe, for BMW S 1000 RR 2020 (K67), made from solid aluminum, black anodized, replaces stock subframe And required for Carbonin SBK Bodywork

Description: Tyre warmer set >EVO< Superbike, 120/70 17 & 190-200/55 17, temperature front/rear adjustable till 99 °C digital, 220V, black

Description: Caliper in two pieces made entirely from billet. This machining, which uses sophisticated numerically controlled equipment, provides maximum stiffness and lightweight values which are reflected in its excellent performance.
The caliper body houses two 34 mm diameter pistons. Particular attention was dedicated to achieving optimum braking control even in poor grip conditions due to any lightening of the rear wheel during the braking phase.
The caliper has sintered brake pads which represent the best of what is currently available on the market. The kit includes a billet machined adaptor bracket.
The caliper is hard oxidised like the ones used on racing bikes, providing further protection. The caliper is marked with the production batch for immediate traceability, as well as the embossed and hand painted Brembo logo.

Description: Parts Included In Complete Race Fairing:
Upper Race Faring (6 Dzus) fits oem screen
Lower Fairing
Left Side Panel (2 Dzus)
Right Side Panel (4 Dzus)
Single Race Seat (2 Pcs) Seat support and Superbike tail which provides a much better riding position for the racers ergonomics
Tank Cover (Oem)
This kit utilizes the oem trim panels for the inner leg area , there are provisions for these to attach to the upper fairing and side panels
Not Included
There are 3 options for seats
• Basic - This seat is a 15mm neoprene foam glued to a base that is molded from the seat pan of the tail section and then attaches to the seat pan with bolts. Please not that these seat's will only fit carbonin seat pans and seat units. It will not work on any other brand. This foam will wear out like any other foam pad.
• Standard - This is an upgrade to the basic seat which is covered in a neoprene material that protects the basic foam and provides the rider a level of grip but without compromising the need to slide side to side. It looks much more professional and will protect the basic foam from any wear from patches on leather suits or abuse from side to side movements. we have seen these seats go on for 3 seasons or more!
• Pro Seat - This seat is for riders or teams that require their seat to provide back support or a step seat to keep them in a position from sliding too far back in the seat under acceleration, this is often done with a raised section so they can still get back in the seat in the full tuck, they are just raised up more which helps keep the butt up and their head shoulders and chest lower in the tuck. It is the same material as the standard seat but can also be customized with team logo's or race number -If you purchase a pro seat we will contact you to design your seat. Please note pro seats are made custom to order

Description: This is a 1 piece airbox cover that has the side panels built in to Replace the oem Airbox Cover and side panels. Requires Bracket kit for installation please see linked products
Perfect Fitment when using matching Carbonin Tail unit
Made from Carbon Fiber
Light Flexible & Durable

This will not fit with the oem Tail bodywork it will only work with Carbonin due to the mounting

Description: Whether you're riding on the street or on the track it makes sense to protect your fork legs from dmage

Protects against damage
Gravel rash
Road rash
Wet Lay Carbon Fiber with Carbon Kevlar laid on the inside for added protection.

These are light-weight and do not interfere with any OEM bodywork.

These also look great and give your bike a great appearance.

Fits Yamaha Fork Leg from 2015+ R1 and the 2017+ R6

Description: Replacement Tail unit for carbonin bodywork

Description: Carbonin Complete Fairing Decal Kit Replica #1186 WHITE 2015-2019 Yamaha R1

Description: Carbonin Complete Fairing Decal kit Replica #1205 2020- BMW S1000RR

Description: Quick Release Fairing Screw fasteners

Description: Pre Drilled for Safety wire for the use of securing your brake caliper bolts. which is a requirement for racing organisations
These are Titanium saving weight over oem and stainless steel

Description:

Description: Fully adjustable rearsets

Description: Fully adjustable rearsets

Description: Spider Racing Rearsets ZX16R 2016+ Reverse Shift

Description: Rear sprocket carrier for carbon rear wheel and BMW HP forged rim with OEM swingarm, no simmering ring, complete with mounting, with fixed pressed inside and outside spacer bushes, as well as bolts M12x1.5x31 mm with nuts M12x1.5 self-locking

Description: SUTER SLIPPER CLUTCH

Description: Billet throttle housing with buttons for the 2020 Yamaha R1

Description: Vesrah VD-355XX GSXR600/750/1000 04-09 ZX10R 08-15

Vesrah XX pads are the top of the line pad. MADE FOR RACING. They offer slightly less bite than the older RJL compound but greater braking power with a progressive feel. Small increases in lever force translate to exceptional increases in braking power. True one-finger braking with excellent feel and no fade. Your brakes will have the same feel and response from the first corner to the last.

Description: AiM Sports Data Hubs

Data Hub, Data Acquisition Component, 4 Way Data Hub with 15.75 in. Cable Length, Each

Description: AiM Sports Slim Linear Potentiometer with 75mm Travel

Description: Quick Info
SOLO Harness
Works with SOLO
Genuine AIM Quality
Product Details
SOLO DL Ducati ECU interface harness*

Description: Sprocket 520 T=15, for BMW S 1000 RR 2019- (K67

Description:

DDC Bracket Kit BMW S1000RR

alpha Racing 2D potentiometer Suspension Kit DDC Bracket Kit BMW S1000RR. Includes bracket holder for your 2D suspension kit DDC sensor, CNC machined parts upper and bottom, 2 ball joint connectors, and finished in anodized aluminum.

alpha Racing 2D potentiometer Suspension Kit DDC Bracket Kit BMW S1000RR. Includes bracket holder for your 2D suspension kit DDC sensor, CNC machined parts upper and bottom, 2 ball joint connectors, and finished in anodized aluminum.

Clamp for the fork tube
Mount for the Lower fork mount

Description: Allen screw filister head M6x18, for brake disc rear, ISO 7380, 10.9, zinc-plated

Description: Bike cover, black/silver, with alpha Racing and S 1000 RR logo in silver, transportation bag incl.

Description: Alpha Racing Bottom fairing part fiberglass OEM fairing, 2009-14 BMW S1000RR
Bottom fairing part fiberglass for OEM fairing, for BMW S 1000 RR, fits to OEM exhaust system, only for race track

Description: Alpha Racing Brake Allen Head Bolt M8x55, DIN 7984
Replacement parts for AlphaRacing Rearsets 2020 BMW S1000RR K67

Description: Brake lever racing short, for BMW S 1000 RR 2019- (K67), folding, black anodised, adjustable lever position length 175 mm

Description: Brake pad set Duo Sinter Racing, front, for BMW S 1000 RR 2019- (K67), 2 pads per unit, pad thickness 8,31 mm, plate thickness 4,0 mm, for OEM calipers

Description: Front brake disc 320 x 5,5 mm EVO, Right, for BMW S 1000 RR 2019-20 (K67), fits Cast wheels and Rotobox Wheels

Description: Alpha Racing Chain adjuster kit EVO black, for BMW S1000RR 2020 (K67), milled aluminium, black anodized

Description: Alpha Racing Chain adjuster kit EVO black, for BMW S1000RR 2020 (K67), milled aluminium, titanium colored anodized

Description: Clutch cable Motorsport V1.1, for BMW S 1000 RR 2019- (K67), for OEM and racing clutch lever

Description: Cover for stock top triple clamp to mount on/off switch when removing ignition lock, aluminum black anodized, with alpha Racing logo

Description: Crashpad kit for racing fairing, left/right, black, for BMW S 1000 RR 2009-2018 and HP4

Description: Front brake disc 320 x 5,5 mm EVO, left, for BMW S 1000 RR 2019- (K67), fits aluminium racing wheels and M-carbon wheels

Description: Alpha Racing Footrest rearset EVO, 2015-2019 BMW S1000RR
-Black Footpeg
-Sold Individually