Carbon Smith 2020-2024 APRILIA RS660 DIMPLED VELOCITY STACKS FOR RACE EXHAUST
- $300.00
- $300.00
- Unit price
- per
Our 2020+ Aprilia RS660 Velocity Stacks are an amazing upgrade to boost performance on your new Aprilia RS660! After several hundred dyno runs, 15 different velocity stack configurations, and 15 gallons of fuel, CarbonSmith has finally finished developing the perfect velocity stack configuration for your RACE TRIM Aprilia RS660! Changing the stock exhaust and OEM air filter allows for much different stoichiometric air/fuel mixture allowing us to change the targeted resonant frequency resulting in MORE POWER!! We found +2 hp gains at multiple spots in the RPM curve with a simple drop in test! More gains are possible with full custom dyno tuning!
THIS KIT INCLUDES A COMBINATION LEFT AND RIGHT VELOCITY STACK DESIGNED FOR OPTIMUM AIR/FUEL MIXTURE ACROSS THE ENTIRE RPM RANGE.
DIMPLE DESIGN CREATES ADDITIONAL TQ AND HP AT HIGH SPEED.
MANUFACTURED WITH NYLON EMBEDDED CARBON FIBER REINFORCED WITH CONTINUOUS CARBON FIBER. THIS MAKES THEM EXTREMELY STRONG, LIGHTWEIGHT, YET FLEXIBLE AND VERY RESISTANT TO HEAT AND CHEMICALS. THESE SHOULD ONLY BE INSTALLED BY A PROFESSIONAL.
- INCLUDES LEFT AND RIGHT STACK SET
- USES OEM HARDWARE FOR INSTALLATION
- RESULTS WILL VARY DEPENDING ON ENGINE BUILD AND TUNING CAPABILITIES
- NO HEAT DEFLECTION UNDER 300 DEGREES F
- WILL NOT DEFORM FROM HARSH RACE FUELS OR NITROUS
In order to maintain our extremely high standard of quality products, CarbonSmith VELOCITY STACKS are not available in mass quantities and are made to order. Each KIT takes over 18 hours of print time and are MADE TO ORDER, therefore your patience is very much appreciated.
Product Specs
| SKU: | RS660DIM |
|---|
Related Products
Example product title
- $300.00
- $300.00
- Unit price
- per
Example product title
- $300.00
- $300.00
- Unit price
- per
Example product title
- $300.00
- $300.00
- Unit price
- per
Example product title
- $300.00
- $300.00
- Unit price
- per
Example product title
- $300.00
- $300.00
- Unit price
- per
Example product title
- $300.00
- $300.00
- Unit price
- per
Example product title
- $300.00
- $300.00
- Unit price
- per
Example product title
- $300.00
- $300.00
- Unit price
- per
Example product title
- $300.00
- $300.00
- Unit price
- per
Example product title
- $300.00
- $300.00
- Unit price
- per
You Might Also Like
Carbon Smith 2020+ APRILIA RS660 OVERSIZED CARBON FIBER SNORKEL AND FAIRING STAY
2020+ APRILIA RS660 OVERSIZED CARBON FIBER SNORKEL AND FAIRING STAY 1 lb lighter than stock 100% Aerospace grade prepreg carbon fiber Includes Carbon Fiber/Kevlar Dash Protection Case Includes Ram Air Inlet Completely rebuildable in case of a crash Oversized Venturi design increases airflow into...
- $750.00
- $750.00
- Unit price
- per
Armour Bodies Aprilia RS660 2021-23 Pro-Series Supersport Kit
Armour Bodies 71-0760SS Aprilia RS660 2021-22 Pro-Series Supersport Kit 71-0760SSWoodcraft Pro-Series SuperSport Kit: 2021+ Aprilia RS660 NOTE: This bodywork kit is made to fit both OEM and many aftermarket exhausts. Woodcraft Aprilia RS660 top triple clamp and 1 inch riser kit are needed in...
- $1,078.99
- $1,078.99
- Unit price
- per
Carbon Smith 2020+ APRILIA RS660 CARBON FIBER AIRBOX
THE CARBONSMITH 2020+ APRILIA RS660 CARBON FIBER AIRBOX WAS MADE TO INCREASE AIR VOLUME AND TO SMOOTH AIRFLOW INTO THE INTAKE. MADE FROM AEROSPACE GRADE PRE-PREG CARBON FIBER, THIS AIRBOX IS OVER 50% LIGHTER, 20% LARGER, AND 10X AS STRONG AS THE OEM PLASTIC...
- $750.00
- $750.00
- Unit price
- per
Recently Viewed Products
Example product title
- $300.00
- $300.00
- Unit price
- per
Example product title
- $300.00
- $300.00
- Unit price
- per
Example product title
- $300.00
- $300.00
- Unit price
- per
Example product title
- $300.00
- $300.00
- Unit price
- per
Example product title
- $300.00
- $300.00
- Unit price
- per
Example product title
- $300.00
- $300.00
- Unit price
- per
Example product title
- $300.00
- $300.00
- Unit price
- per
Example product title
- $300.00
- $300.00
- Unit price
- per
Example product title
- $300.00
- $300.00
- Unit price
- per
Example product title
- $300.00
- $300.00
- Unit price
- per
Let customers speak for us
The higher pressure cap stopped my overflow from becoming pressurized and blowing out
The higher pressure cap stopped my overflow from becoming pressurized and blowing out. I did a combustion gas test on the cooing system and it passed all 3 times, so it made since the factory cap was to low of a rating for serve duty.
Anonymous
The internet provides many options
The internet provides many options. Not all are good. HHR provides top notch customer service and the best parts available.
Andrew Cheman
quick
quick shipper
Anonymous
awesome customer
awesome customer service
Anonymous
Avio fiber glass fairing (complete, w/ cut-outs) & Motoholders bracket
I ordered Avio fiber glass fairing and all necessary brackets for 2023 Yamaha r1. HHR answered all my questions by email and later by phone. The staff I communicated with were knowledgeable, straightforward, helpful, and non-judgmental. I've had been using the products for more than a year, and I have no complaints and am quite happy with it. I've heard it's easy to installl, too, but I had someone else do it, so I can't say if that's true. The bodywork has cutouts for the tail light and headlights. Works great.
Ge0rge G1lb3rt
Best store to buy
Always willing to help and
Best store to buy
Always willing to help and with patience
Anonymous
One fine piece of carbon fiber
One fine piece of carbon fiber. Light as a feather. Bike rides like a whole different monster
Andrew Cheman
Weight of a feather
Weight of a feather. Super flickable, launches and rolls are noticeably more aggressive
Andrew Cheman
Good price
Good price, delivery and fit.
Anonymous
Great track bodywork kit
Great track bodywork kit. Everything fit well. Excellent quality
Anonymous
Good stuff
Communication was on point and the fella worked with me on my address.
Bradley Gouge
The good
The good stuff
James Barry
Awesome
Awesome
Anonymous
Excellent fit and finish
Excellent fit and finish. Easy installation with no modification required
Stephen Davila
Install easy
Supreme oversuspenion for my BMW M1000XR COMPETITION
Pat T.
- Choosing a selection results in a full page refresh.