Due to Material supply issues Rotobox production is now 8 to 10 weeks
Carbonin production will resume Aug 17th please allow extra time for non stock items to be produced after the European Vacation


We do not stock this item in our warehouse. All orders for this brand are drop shipped directly from our US supplier. Most orders are processed and shipped within 1–6 business days, depending on availability and demand.
NEW QUICK SHIFT SYSTEM WITH DYNAMIC CUT-OFF TIME MANAGEMENT
PER ENGINE RPM
|
Approved by IRTA for MOTO2 World Championship use. |
IONIC NRG enables the driver to engage the gears without using the clutch and when the throttle is completely open. |
![]() |
The advantage for the driver results in extremely short shift times, but above all in perfectly keeping the motorbike attitude in acceleration at the exit of corners since no pitch and loss of traction is triggered by the closing and reopening of the throttle. The sensor can be easily installed on the gearbox lever or pattern rod and it is directly connected to the small central unit that can be easily installed and adjusted. |
AVAILABLE OPTIONAL PLUG&PLAY CONNECTION KITS FOR THE MOST COMMON BIKE MODELS |
How it works:
|
At any shift of gears, the lever is subject to the energy of the driver’s action. The sensor constantly conveys the energy of the stress it is subjected to the central unit that will power off the engine for some milliseconds (typically 40-50) after having reached the value set up by the user. The short power off time is enough to engage the gears while keeping the throttle completely open without acting on the clutch. |
The dynamic engine RPM management is based on a software algorithm which automatically adjusts the cut-off time, this allows to obtain optimum smoothness at low RPM with the maximum precision and shifting speed at high RPM. The system inhibits the intervention below 3000 RPM (value adjustable by user) to avoid undesired engine stopping in low speed or idle maneuvers. |
|
THE NEW INCREDIBLE DYNAMIC NRG SENSOR IS PROTECTED BY STARLANE WITH 2 PCT INTERNATIONAL PATENTS. |
|
IONIC NRG uses the new NRG sensor, which is the result of Starlane’s 13-year experience in conceiving and accomplishing solutions intended to detect the shift of gears, which has induced important Italian motorcycle industries, as leaders in the World Superbike Championship, to use Starlane shift sensors on their own official motorbikes. |
![]() |
|
The miniaturised NRG sensor is intended to detect not only the simple shift, but a signal proportional to the intensity of the driver’s action on the lever and pattern rod. This solution can provide for an extremely valid and accurate system without fastening to the engine or the chassis any counterpiece or spring adding troublesome clearances to the leverage. This means that it is not sensitive to the lever vibrations and oscillations due to the asphalt roughness as well as to the lever shift due to the involuntary action of the driver’s foot. This result can not be achieved by the common systems on the market, which detect the simple lever shift by means of linear sensors or complete with a microswitch because characterised by a very low accuracy level. |
|
The sensor is monolithic, composed by one single piece without any movable part. It is not subject to any wear effect. |
Why the new NRG system is so revolutionary, safe and profitable: |
|
1) The new sensor can be universally installed in just a few seconds on all motorbikes. 2) The sensor always remains in the most protected area in case of CRASH. 3) Any impact against the curbs that may bend or damage the lever lengthwise and make any other solution inefficient is unable to have any effect on the NRG sensor operation. 4) One single article can be used on all Road, Supermoto, Enduro and Cross motorbikes. If you change motorbike model, you can keep the same IONIC NRG Kit for the new one. 5) It acts in both directions, even if it is not required by the downshift, this makes it really universal. |
|
The NRG sensor is shaped (washer shape) and sized (small-size) in such a way that it can be installed on all motorbikes in just a few seconds without mechanically changing its original members. This makes it completely universal. |
![]() |
|
IONIC NRG requires no mechanical setup! |
![]() |
|
|
The small electronic control unit enables the user to set up the sensor sensitivity threshold and the cut off time. |
|
ATTENTION: Please mount the IONIC NRG SUZUKI version (code IONRGSZ) on Suzuki road motorbikes not supplied with a Yoshimura ECU!! For Aprilia RSV4 is available the specific kit (code IONRGRSV4) as the universal version is not compatible. |
For installation instructions, click on link below
http://www.starlane.com/ftp/manuali/IONIC_NRG_Suzu...
|
Content of the package for IONIC NRG (COD. IONRG):
|
|||||||||||||
| SKU: | C-IONRGSZ |
|---|
Love it, wish it came in twill weave gloss but it is on sale and fit and looks amazing! Just ordered frame carbon fiber from here as well to match !
I ordered this part for my r6.
Got a email back about 4 days later saying I didnt order the correct lines for it.
HHR didnt have to do that. I would not have known they took the time to make sure i got the part the first time.
I appreciate that alot. Integrity in this day and age seems to be long forgotten thing.
Will be ordering more parts as I need them and will use HHR for them.
Awesome piece and fits perfect. Definitely recommend getting this over the standard version, which I also have. This one pan is 30mm lower. Also make sure you get the Alpha seat Support bracket if running the stock subframe in addition to the mounting kit.
8mm swingarm spools such a great design very strong and doesn’t weigh nothing there not so big so it doesn’t stand out it’s perfect
Does what it's supposed to do
Love the quality and how fast I received my item even being custom ordered
Perfect fit and great quality. The coolent hose clamps are definitely a must due to there perfect sizing
Item came exactly as expected super fast shipping and the quality is insanely good product is exactly as described
little slow on shipping but i was ordering parts for a 30 yr old bike. All in all good transaction informed whole way thru with times
I will definitely be contacting HHR for more products in the near future.
Nigel Gale
Looks like incredible engineered products, both the thumb brake & the rear master cylinder. On the master cylinder, be aware QNIUM use 6mm bolts where as the stock Triumph 675 bolts are 8mm. Not a big deal, just be aware.
Nigel Gale
I am really glad you have employees like MARK. He was incredibly patient. There were some bumps along the way & he made sure to communicate what was going on & kept me in the loop has to the time frame for delivery etc. Great customer service.
Mark was exactly right, the quality of this product is remarkable. Exactly as promised!!!
Thanks for subscribing!
This email has been registered!