HHR Performance - Crash Protection & Safety
Motorcycle Bike & Crash Protection
Motorcycle racing isn’t without its own hazards. From taking turns that are too sharp to running into bumpy track terrain, there are a lot of opportunities for something to go wrong. Because of this, you must make sure that your ride is ready for anything when going into a race. At HHR Performance, we’re familiar with all the potential risks and the costly repairs that come after the fact. As such, we know just the motorcycle bike and crash protection parts you need to help keep your bike safe from damage. Browse our online selection of motorcycle bike and crash protection, including engine case covers, exhaust protectors, and sliders utilized by the professionals. Even during the most dangerous rides, these components can withstand the rigors of the sport and ensure you come out victorious on the other side.
Select a Sub-Category
we sell many top brands in Engine case cover protection from GB Racing 39N racing Bonamici Racing to R&G racing who provide a wide range of crash protection
Crash Protection & Safety Featured Products
Items 1-60 of 72
- Page 1 of 2
- Next
Description:
Extreme Components Engine protectors in aluminium fully whole billet with 3d machining 4 PIECE for BMW S1000RR (2019/2020) (pick up + alternator + clutch + water pump) - PROT-ENG 4 S1000RR 19
-Made In Italy
-Research and development takes place exclusively through collaboration with the best race teams engaged for years in the most prestigious national and world competitions; And only after specific tests, does Extreme Components start the production.
-Made In Italy
-Research and development takes place exclusively through collaboration with the best race teams engaged for years in the most prestigious national and world competitions; And only after specific tests, does Extreme Components start the production.
Item #: PROT-ENG 4 S1000RR 19
Condition:
New
On-hand inventory ships within 24 hours: When out of stock delivery times can vary from 2 to 6 weeks Please note supply-chain related delays are possible.
Price: $527.35
Description:
ENGINE PROTECTORS IN ALUMINIUM FULLY WHOLE BILLET WITH 3D MACHINING 3 PIECES FOR APRILIA RS660 / TUONO 660 (2020/2023) (ALTERNATOR + CLUTCH + WATER PUMP) PROT-ENG 3 RS660
-Made In Italy
-Research and development takes place exclusively through collaboration with the best race teams engaged for years in the most prestigious national and world competitions; And only after specific tests, does Extreme Components start the production.
-Made In Italy
-Research and development takes place exclusively through collaboration with the best race teams engaged for years in the most prestigious national and world competitions; And only after specific tests, does Extreme Components start the production.
Item #: PROT-ENG 3 RS660
Condition:
New
On-hand inventory ships within 24 hours: When out of stock delivery times can vary from 2 to 6 weeks Please note supply-chain related delays are possible.
Price: $507.00
Description:
Extreme Components CNC Brembo master cylinder protection - PBB01
-Made In Italy
-Research and development takes place exclusively through collaboration with the best race teams engaged for years in the most prestigious national and world competitions; And only after specific tests, does Extreme Components start the production.
-Made In Italy
-Research and development takes place exclusively through collaboration with the best race teams engaged for years in the most prestigious national and world competitions; And only after specific tests, does Extreme Components start the production.
Item #: PBB01
Condition:
New
On-hand inventory ships within 24 hours: When
out of stock delivery times can vary from 2 to
6 weeks Please note supply-chain related
delays are possible.
Price: $110.70
Description:
Extreme Components Engine protectors in aluminium fully whole billet with 3d machining 3 PIECE for Honda CBR 1000 RR-R / SP (2020) (pick up + alternator + clutch) - PROT-ENG 3 CBR 1000RR-R
-Made In Italy
-Research and development takes place exclusively through collaboration with the best race teams engaged for years in the most prestigious national and world competitions; And only after specific tests, does Extreme Components start the production.
-Made In Italy
-Research and development takes place exclusively through collaboration with the best race teams engaged for years in the most prestigious national and world competitions; And only after specific tests, does Extreme Components start the production.
Item #: PROT-ENG 3 CBR 1000RR-R
Condition:
New
On-hand inventory ships within 24 hours: When out of stock delivery times can vary from 2 to 6 weeks Please note supply-chain related delays are possible.
Price: $443.88
Description:
Extreme Components Engine protectors in aluminium fully whole billet with 3d machining 3 PIECE for Kawasaki ZX 10 R (2016/2020) (pick up + alternator + clutch) - PROT-ENG 3 ZX10R
-Made In Italy
-Research and development takes place exclusively through collaboration with the best race teams engaged for years in the most prestigious national and world competitions; And only after specific tests, does Extreme Components start the production.
-Made In Italy
-Research and development takes place exclusively through collaboration with the best race teams engaged for years in the most prestigious national and world competitions; And only after specific tests, does Extreme Components start the production.
Item #: PROT-ENG 3 ZX10R
Condition:
New
On-hand inventory ships within 24 hours: When out of stock delivery times can vary from 2 to 6 weeks Please note supply-chain related delays are possible.
Price: $424.00
Description:
Extreme Components Engine protector in aluminium fully whole billet with 3d machining - alternator for Honda CBR 1000 RR-R / SP (2020) - ALTER CBR 1000RR-R
-Made In Italy
-Research and development takes place exclusively through collaboration with the best race teams engaged for years in the most prestigious national and world competitions; And only after specific tests, does Extreme Components start the production.
-Made In Italy
-Research and development takes place exclusively through collaboration with the best race teams engaged for years in the most prestigious national and world competitions; And only after specific tests, does Extreme Components start the production.
Item #: ALTER CBR 1000RR-R
Condition:
New
On-hand inventory ships within 24 hours: When out of stock delivery times can vary from 2 to 6 weeks Please note supply-chain related delays are possible.
Price: $186.83
Description:
Extreme Components Engine protector in aluminium fully whole billet with 3d machining - alternator for Ducati PANIGALE V4R (2019/2020) - ALTER PANV4R
-Made In Italy
-Research and development takes place exclusively through collaboration with the best race teams engaged for years in the most prestigious national and world competitions; And only after specific tests, does Extreme Components start the production.
-Made In Italy
-Research and development takes place exclusively through collaboration with the best race teams engaged for years in the most prestigious national and world competitions; And only after specific tests, does Extreme Components start the production.
Item #: ALTER PANV4R
Condition:
New
On-hand inventory ships within 24 hours: When out of stock delivery times can vary from 2 to 6 weeks Please note supply-chain related delays are possible.
Price: $205.38
Description:
Extreme Components Engine protector in aluminium fully whole billet with 3d machining - alternator for Kawasaki Ninja 400 (2018/2020) - ALTER NJ40
-Made In Italy
-Research and development takes place exclusively through collaboration with the best race teams engaged for years in the most prestigious national and world competitions; And only after specific tests, does Extreme Components start the production.
-Made In Italy
-Research and development takes place exclusively through collaboration with the best race teams engaged for years in the most prestigious national and world competitions; And only after specific tests, does Extreme Components start the production.
Item #: ALTER NJ40
Condition:
New
On-hand inventory ships within 24 hours: When out of stock delivery times can vary from 2 to 6 weeks Please note supply-chain related delays are possible.
Price: $298.20
Description:
Extreme Components Engine protector in aluminium fully whole billet with 3d machining - alternator for KTM 250/390RC (2015/2020) - ALTER K2539
-Made In Italy
-Research and development takes place exclusively through collaboration with the best race teams engaged for years in the most prestigious national and world competitions; And only after specific tests, does Extreme Components start the production.
-Made In Italy
-Research and development takes place exclusively through collaboration with the best race teams engaged for years in the most prestigious national and world competitions; And only after specific tests, does Extreme Components start the production.
Item #: ALTER K2539
Condition:
New
On-hand inventory ships within 24 hours: When out of stock delivery times can vary from 2 to 6 weeks Please note supply-chain related delays are possible.
Price: $222.60
Description:
Extreme Components Engine protector in aluminium fully whole billet with 3d machining - alternator for KTM Moto3 250 (2015/2020) - ALTER K25MT3
-Made In Italy
-Research and development takes place exclusively through collaboration with the best race teams engaged for years in the most prestigious national and world competitions; And only after specific tests, does Extreme Components start the production.
-Made In Italy
-Research and development takes place exclusively through collaboration with the best race teams engaged for years in the most prestigious national and world competitions; And only after specific tests, does Extreme Components start the production.
Item #: ALTER K25MT3
Condition:
New
On-hand inventory ships within 24 hours: When out of stock delivery times can vary from 2 to 6 weeks Please note supply-chain related delays are possible.
Price: $192.13
Description:
Extreme Components Engine protector in aluminium fully whole billet with 3d machining - alternator for Ducati Panigale V4 / V4S / V4R and Streetfighter V4/ V4S (2018/2020) - ALTER PANV4
-Made In Italy
-Research and development takes place exclusively through collaboration with the best race teams engaged for years in the most prestigious national and world competitions; And only after specific tests, does Extreme Components start the production.
-Made In Italy
-Research and development takes place exclusively through collaboration with the best race teams engaged for years in the most prestigious national and world competitions; And only after specific tests, does Extreme Components start the production.
Item #: ALTER PANV4
Condition:
New
On-hand inventory ships within 24 hours: When out of stock delivery times can vary from 2 to 6 weeks Please note supply-chain related delays are possible.
Price: $205.38
Description:
Extreme Components Engine protector in aluminium fully whole billet with 3d machining - alternator for Yamaha Pre Moto 3 250 (2019/2020) - ALTER YPM3
-Made In Italy
-Research and development takes place exclusively through collaboration with the best race teams engaged for years in the most prestigious national and world competitions; And only after specific tests, does Extreme Components start the production.
-Made In Italy
-Research and development takes place exclusively through collaboration with the best race teams engaged for years in the most prestigious national and world competitions; And only after specific tests, does Extreme Components start the production.
Item #: ALTER YPM3
Condition:
New
On-hand inventory ships within 24 hours: When out of stock delivery times can vary from 2 to 6 weeks Please note supply-chain related delays are possible.
Price: $188.15
Description:
Extreme Components Engine protector in aluminium fully whole billet with 3d machining - alternator for Yamaha R1 (2015/2020) - ALTER R1
-Made In Italy
-Research and development takes place exclusively through collaboration with the best race teams engaged for years in the most prestigious national and world competitions; And only after specific tests, does Extreme Components start the production.
-Made In Italy
-Research and development takes place exclusively through collaboration with the best race teams engaged for years in the most prestigious national and world competitions; And only after specific tests, does Extreme Components start the production.
Item #: ALTER R1
Condition:
New
On-hand inventory ships within 24 hours: When out of stock delivery times can vary from 2 to 6 weeks Please note supply-chain related delays are possible.
Price: $132.50
Description:
Extreme Components Engine protector in aluminium fully whole billet with 3d machining - alternator for Kawasaki ZX 10 R (2016/2020) - ALTER ZX10R
-Made In Italy
-Research and development takes place exclusively through collaboration with the best race teams engaged for years in the most prestigious national and world competitions; And only after specific tests, does Extreme Components start the production.
-Made In Italy
-Research and development takes place exclusively through collaboration with the best race teams engaged for years in the most prestigious national and world competitions; And only after specific tests, does Extreme Components start the production.
Item #: ALTER ZX10R
Condition:
New
On-hand inventory ships within 24 hours: When out of stock delivery times can vary from 2 to 6 weeks Please note supply-chain related delays are possible.
Price: $132.50
Description:
Extreme Components Engine protector for Aprilia RSV4 RF (2009/2020) - alternator - ALTER RSV4
-Made In Italy
-Research and development takes place exclusively through collaboration with the best race teams engaged for years in the most prestigious national and world competitions; And only after specific tests, does Extreme Components start the production.
-Made In Italy
-Research and development takes place exclusively through collaboration with the best race teams engaged for years in the most prestigious national and world competitions; And only after specific tests, does Extreme Components start the production.
Item #: ALTER RSV4
Condition:
New
On-hand inventory ships within 24 hours: When out of stock delivery times can vary from 2 to 6 weeks Please note supply-chain related delays are possible.
Price: $145.75
Description:
Extreme Components Engine protector for Aprilia RSV4 RF (2009/2020) - clutch - CLUTCH RSV4
-Made In Italy
-Research and development takes place exclusively through collaboration with the best race teams engaged for years in the most prestigious national and world competitions; And only after specific tests, does Extreme Components start the production.
-Made In Italy
-Research and development takes place exclusively through collaboration with the best race teams engaged for years in the most prestigious national and world competitions; And only after specific tests, does Extreme Components start the production.
Item #: CLUTCH RSV4
Condition:
New
On-hand inventory ships within 24 hours: When out of stock delivery times can vary from 2 to 6 weeks Please note supply-chain related delays are possible.
Price: $265.00
Description:
Extreme Components Engine protector for BMW S1000RR (2019/2020) - clutch - CLUTCH S1000RR 19
-Made In Italy
-Research and development takes place exclusively through collaboration with the best race teams engaged for years in the most prestigious national and world competitions; And only after specific tests, does Extreme Components start the production.
-Made In Italy
-Research and development takes place exclusively through collaboration with the best race teams engaged for years in the most prestigious national and world competitions; And only after specific tests, does Extreme Components start the production.
Item #: CLUTCH S1000RR 19
Condition:
New
On-hand inventory ships within 24 hours: When out of stock delivery times can vary from 2 to 6 weeks Please note supply-chain related delays are possible.
Price: $149.73
Description:
Extreme Components Engine protector for BMW S1000RR (2019/2020) - alternator - ALTER S1000RR 19
-Made In Italy
-Research and development takes place exclusively through collaboration with the best race teams engaged for years in the most prestigious national and world competitions; And only after specific tests, does Extreme Components start the production.
-Made In Italy
-Research and development takes place exclusively through collaboration with the best race teams engaged for years in the most prestigious national and world competitions; And only after specific tests, does Extreme Components start the production.
Item #: ALTER S1000RR 19
Condition:
New
On-hand inventory ships within 24 hours: When out of stock delivery times can vary from 2 to 6 weeks Please note supply-chain related delays are possible.
Price: $149.73
Description:
Extreme Components Engine protector in aluminium fully whole billet with 3d machining - clutch for BMW S1000RR (2009/2018) - CLUTCH S1000RR
-Made In Italy
-Research and development takes place exclusively through collaboration with the best race teams engaged for years in the most prestigious national and world competitions; And only after specific tests, does Extreme Components start the production.
-Made In Italy
-Research and development takes place exclusively through collaboration with the best race teams engaged for years in the most prestigious national and world competitions; And only after specific tests, does Extreme Components start the production.
Item #: CLUTCH S1000RR
Condition:
New
On-hand inventory ships within 24 hours: When out of stock delivery times can vary from 2 to 6 weeks Please note supply-chain related delays are possible.
Price: $141.78
Description:
Extreme Components Engine protector in aluminium fully whole billet with 3d machining - clutch for Ducati PANIGALE V4R (2019/2020) - CLUTCH PANV4R
-Made In Italy
-Research and development takes place exclusively through collaboration with the best race teams engaged for years in the most prestigious national and world competitions; And only after specific tests, does Extreme Components start the production.
-Made In Italy
-Research and development takes place exclusively through collaboration with the best race teams engaged for years in the most prestigious national and world competitions; And only after specific tests, does Extreme Components start the production.
Item #: CLUTCH PANV4R
Condition:
New
On-hand inventory ships within 24 hours: When out of stock delivery times can vary from 2 to 6 weeks Please note supply-chain related delays are possible.
Price: $239.83
Description:
Extreme Components Engine protector in aluminium fully whole billet with 3d machining - clutch for Honda CBR 1000 RR-R / SP (2020) - CLUTCH CBR 1000RR-R
-Made In Italy
-Research and development takes place exclusively through collaboration with the best race teams engaged for years in the most prestigious national and world competitions; And only after specific tests, does Extreme Components start the production.
-Made In Italy
-Research and development takes place exclusively through collaboration with the best race teams engaged for years in the most prestigious national and world competitions; And only after specific tests, does Extreme Components start the production.
Item #: CLUTCH CBR 1000RR-R
Condition:
New
On-hand inventory ships within 24 hours: When out of stock delivery times can vary from 2 to 6 weeks Please note supply-chain related delays are possible.
Price: $137.80
Description:
Extreme Components Engine protector in aluminium fully whole billet with 3d machining - clutch for Kawasaki Ninja 400 (2018/2020) - CLUTCH NJ40
-Made In Italy
-Research and development takes place exclusively through collaboration with the best race teams engaged for years in the most prestigious national and world competitions; And only after specific tests, does Extreme Components start the production.
-Made In Italy
-Research and development takes place exclusively through collaboration with the best race teams engaged for years in the most prestigious national and world competitions; And only after specific tests, does Extreme Components start the production.
Item #: CLUTCH NJ40
Condition:
New
On-hand inventory ships within 24 hours: When out of stock delivery times can vary from 2 to 6 weeks Please note supply-chain related delays are possible.
Price: $298.20
Description:
Extreme Components Engine protector in aluminium fully whole billet with 3d machining - clutch for Kawasaki ZX 10 R (2016/2020) - CLUTCH ZX10R
-Made In Italy
-Research and development takes place exclusively through collaboration with the best race teams engaged for years in the most prestigious national and world competitions; And only after specific tests, does Extreme Components start the production.
-Made In Italy
-Research and development takes place exclusively through collaboration with the best race teams engaged for years in the most prestigious national and world competitions; And only after specific tests, does Extreme Components start the production.
Item #: CLUTCH ZX10R
Condition:
New
On-hand inventory ships within 24 hours: When out of stock delivery times can vary from 2 to 6 weeks Please note supply-chain related delays are possible.
Price: $181.53
Description:
Extreme Components Engine protector in aluminium fully whole billet with 3d machining - clutch for KTM 250/390RC (2015/2020) - CLUTCH K2539
-Made In Italy
-Research and development takes place exclusively through collaboration with the best race teams engaged for years in the most prestigious national and world competitions; And only after specific tests, does Extreme Components start the production.
-Made In Italy
-Research and development takes place exclusively through collaboration with the best race teams engaged for years in the most prestigious national and world competitions; And only after specific tests, does Extreme Components start the production.
Item #: CLUTCH K2539
Condition:
New
On-hand inventory ships within 24 hours: When out of stock delivery times can vary from 2 to 6 weeks Please note supply-chain related delays are possible.
Price: $188.15
Description:
Extreme Components Engine protector in aluminium fully whole billet with 3d machining - clutch for KTM Moto3 250 (2015/2020) - CLUTCH K25MT3
-Made In Italy
-Research and development takes place exclusively through collaboration with the best race teams engaged for years in the most prestigious national and world competitions; And only after specific tests, does Extreme Components start the production.
-Made In Italy
-Research and development takes place exclusively through collaboration with the best race teams engaged for years in the most prestigious national and world competitions; And only after specific tests, does Extreme Components start the production.
Item #: CLUTCH K25MT3
Condition:
New
On-hand inventory ships within 24 hours: When out of stock delivery times can vary from 2 to 6 weeks Please note supply-chain related delays are possible.
Price: $205.38
Description:
Extreme Components Engine protector in aluminium fully whole billet with 3d machining - clutch for Ducati Panigale V4 / V4S / V4R and Streetfighter V4/ V4S (2018/2020) - CLUTCH PANV4
-Made In Italy
-Research and development takes place exclusively through collaboration with the best race teams engaged for years in the most prestigious national and world competitions; And only after specific tests, does Extreme Components start the production.
-Made In Italy
-Research and development takes place exclusively through collaboration with the best race teams engaged for years in the most prestigious national and world competitions; And only after specific tests, does Extreme Components start the production.
Item #: CLUTCH PANV4
Condition:
New
On-hand inventory ships within 24 hours: When out of stock delivery times can vary from 2 to 6 weeks Please note supply-chain related delays are possible.
Price: $205.38
Description:
Extreme Components Engine protector in aluminium fully whole billet with 3d machining - clutch for Yamaha Pre Moto 3 250 (2019/2020) - CLUTCH YPM3
-Made In Italy
-Research and development takes place exclusively through collaboration with the best race teams engaged for years in the most prestigious national and world competitions; And only after specific tests, does Extreme Components start the production.
-Made In Italy
-Research and development takes place exclusively through collaboration with the best race teams engaged for years in the most prestigious national and world competitions; And only after specific tests, does Extreme Components start the production.
Item #: CLUTCH YPM3
Condition:
New
On-hand inventory ships within 24 hours: When out of stock delivery times can vary from 2 to 6 weeks Please note supply-chain related delays are possible.
Price: $188.15
Description:
Extreme Components Engine protector in aluminium fully whole billet with 3d machining - clutch for Yamaha R1 (2015/2020) - CLUTCH R1
-Made In Italy
-Research and development takes place exclusively through collaboration with the best race teams engaged for years in the most prestigious national and world competitions; And only after specific tests, does Extreme Components start the production.
-Made In Italy
-Research and development takes place exclusively through collaboration with the best race teams engaged for years in the most prestigious national and world competitions; And only after specific tests, does Extreme Components start the production.
Item #: CLUTCH R1
Condition:
New
On-hand inventory ships within 24 hours: When out of stock delivery times can vary from 2 to 6 weeks Please note supply-chain related delays are possible.
Price: $181.53
Description:
Extreme Components Engine protector in aluminium fully whole billet with 3d machining - alternator for BMW S1000RR (2009/2018) - ALTER S1000RR
-Made In Italy
-Research and development takes place exclusively through collaboration with the best race teams engaged for years in the most prestigious national and world competitions; And only after specific tests, does Extreme Components start the production.
-Made In Italy
-Research and development takes place exclusively through collaboration with the best race teams engaged for years in the most prestigious national and world competitions; And only after specific tests, does Extreme Components start the production.
Item #: ALTER S1000RR
Condition:
New
On-hand inventory ships within 24 hours: When out of stock delivery times can vary from 2 to 6 weeks Please note supply-chain related delays are possible.
Price: $156.35
Description:
Extreme Components Engine protector for MV F3 (2012/2020) - alternator - ALTER F3
-Made In Italy
-Research and development takes place exclusively through collaboration with the best race teams engaged for years in the most prestigious national and world competitions; And only after specific tests, does Extreme Components start the production.
-Made In Italy
-Research and development takes place exclusively through collaboration with the best race teams engaged for years in the most prestigious national and world competitions; And only after specific tests, does Extreme Components start the production.
Item #: ALTER F3
Condition:
New
On-hand inventory ships within 24 hours: When out of stock delivery times can vary from 2 to 6 weeks Please note supply-chain related delays are possible.
Price: $215.25
Description:
Extreme Components Engine protector for MV F3 (2012/2020) - clutch - CLUTCH F3
-Made In Italy
-Research and development takes place exclusively through collaboration with the best race teams engaged for years in the most prestigious national and world competitions; And only after specific tests, does Extreme Components start the production.
-Made In Italy
-Research and development takes place exclusively through collaboration with the best race teams engaged for years in the most prestigious national and world competitions; And only after specific tests, does Extreme Components start the production.
Item #: CLUTCH F3
Condition:
New
On-hand inventory ships within 24 hours: When out of stock delivery times can vary from 2 to 6 weeks Please note supply-chain related delays are possible.
Price: $307.65
Description:
Extreme Components Engine protector for Yamaha R3 (2015/2020) - clutch - CLUTCH R3
-Made In Italy
-Research and development takes place exclusively through collaboration with the best race teams engaged for years in the most prestigious national and world competitions; And only after specific tests, does Extreme Components start the production.
-Made In Italy
-Research and development takes place exclusively through collaboration with the best race teams engaged for years in the most prestigious national and world competitions; And only after specific tests, does Extreme Components start the production.
Item #: CLUTCH R3
Condition:
New
On-hand inventory ships within 24 hours: When out of stock delivery times can vary from 2 to 6 weeks Please note supply-chain related delays are possible.
Price: $220.50
Description:
Extreme Components Engine protector for Yamaha R6 (2007/2020) - clutch - CLUTCH R6
-Made In Italy
-Research and development takes place exclusively through collaboration with the best race teams engaged for years in the most prestigious national and world competitions; And only after specific tests, does Extreme Components start the production.
-Made In Italy
-Research and development takes place exclusively through collaboration with the best race teams engaged for years in the most prestigious national and world competitions; And only after specific tests, does Extreme Components start the production.
Item #: CLUTCH R6
Condition:
New
On-hand inventory ships within 24 hours: When out of stock delivery times can vary from 2 to 6 weeks Please note supply-chain related delays are
possible.
Price: $129.85
Description:
Extreme Components Engine protector for Yamaha YZF-R125 (2013/2020) - PROT-ENG R125
-Made In Italy
-Research and development takes place exclusively through collaboration with the best race teams engaged for years in the most prestigious national and world competitions; And only after specific tests, does Extreme Components start the production.
-Made In Italy
-Research and development takes place exclusively through collaboration with the best race teams engaged for years in the most prestigious national and world competitions; And only after specific tests, does Extreme Components start the production.
Item #: PROT-ENG R125
Condition:
New
On-hand inventory ships within 24 hours: When out of stock delivery times can vary from 2 to 6 weeks Please note supply-chain related delays are possible.
Price: $238.50
Description:
Extreme Components ENGINE PROTECTOR IN ALUMINIUM FULLY WHOLE BILLET WITH 3D MACHINING FOR APRILIA RS660 / TUONO 660 (2020/2023) (ALTERNATOR) ALTER RS660
-Made In Italy
-Research and development takes place exclusively through collaboration with the best race teams engaged for years in the most prestigious national and world competitions; And only after specific tests, does Extreme Components start the production.
-Made In Italy
-Research and development takes place exclusively through collaboration with the best race teams engaged for years in the most prestigious national and world competitions; And only after specific tests, does Extreme Components start the production.
Item #: ALTER RS660
Condition:
New
On-hand inventory ships within 24 hours: When out of stock delivery times can vary from 2 to 6
weeks Please note supply-chain related delays are possible.
Price: $158.63
Description:
Extreme Components Engine protector for Kawasaki Ninja 300 (2015/2017) - clutch - CLUTCH NJ15
-Made In Italy
-Research and development takes place exclusively through collaboration with the best race teams engaged for years in the most prestigious national and world competitions; And only after specific tests, does Extreme Components start the production.
-Made In Italy
-Research and development takes place exclusively through collaboration with the best race teams engaged for years in the most prestigious national and world competitions; And only after specific tests, does Extreme Components start the production.
Item #: CLUTCH NJ15
Condition:
New
On-hand inventory ships within 24 hours: When out of stock delivery times can vary from 2 to 6 weeks Please note supply-chain related delays are possible.
Price: $298.20
Description:
Extreme Components Engine protectors for Aprilia RSV4 RF (2009/2020) - alternator + clutch - PROT-ENG 2 RSV4
-Made In Italy
-Research and development takes place exclusively through collaboration with the best race teams engaged for years in the most prestigious national and world competitions; And only after specific tests, does Extreme Components start the production.
-Made In Italy
-Research and development takes place exclusively through collaboration with the best race teams engaged for years in the most prestigious national and world competitions; And only after specific tests, does Extreme Components start the production.
Item #: PROT-ENG 2 RSV4
Condition:
New
On-hand inventory ships within 24 hours: When out of stock delivery times can vary from 2 to 6 weeks Please note supply-chain related delays are possible.
Price: $384.25
Description:
Extreme Components Engine protectors for Kawasaki Ninja 300 (2015/2017) - alternator + clutch - PROT-ENG 2 NJ15
-Made In Italy
-Research and development takes place exclusively through collaboration with the best race teams engaged for years in the most prestigious national and world competitions; And only after specific tests, does Extreme Components start the production.
-Made In Italy
-Research and development takes place exclusively through collaboration with the best race teams engaged for years in the most prestigious national and world competitions; And only after specific tests, does Extreme Components start the production.
Item #: PROT-ENG 2 NJ15
Condition:
New
On-hand inventory ships within 24 hours: When out of stock delivery times can vary from 2 to 6 weeks Please note supply-chain related delays are possible.
Price: $567.00
Description:
Extreme Components Engine protectors for MV F3 (2012/2020) - alternator + clutch - PROT-ENG F3
-Made In Italy
-Research and development takes place exclusively through collaboration with the best race teams engaged for years in the most prestigious national and world competitions; And only after specific tests, does Extreme Components start the production.
-Made In Italy
-Research and development takes place exclusively through collaboration with the best race teams engaged for years in the most prestigious national and world competitions; And only after specific tests, does Extreme Components start the production.
Item #: PROT-ENG F3
Condition:
New
On-hand inventory ships within 24 hours: When out of stock delivery times can vary from 2 to 6 weeks Please note supply-chain related delays are possible.
Price: $502.95
Description:
Extreme Components Engine protectors for Suzuki GSXR 1000 (2017/2020) - pick up + alternator + clutch - PROT-ENG 3 GSXR1000
-Made In Italy
-Research and development takes place exclusively through collaboration with the best race teams engaged for years in the most prestigious national and world competitions; And only after specific tests, does Extreme Components start the production.
-Made In Italy
-Research and development takes place exclusively through collaboration with the best race teams engaged for years in the most prestigious national and world competitions; And only after specific tests, does Extreme Components start the production.
Item #: PROT-ENG 3 GSXR1000
Condition:
New
On-hand inventory ships within 24 hours: When out of stock delivery times can vary from 2 to 6 weeks Please note supply-chain related delays are possible.
Price: $439.90
Description:
Extreme Components Engine protectors for Yamaha R3 (2015/2020) - pick up + alternator + clutch - PROT-ENG R3
-Made In Italy
-Research and development takes place exclusively through collaboration with the best race teams engaged for years in the most prestigious national and world competitions; And only after specific tests, does Extreme Components start the production.
-Made In Italy
-Research and development takes place exclusively through collaboration with the best race teams engaged for years in the most prestigious national and world competitions; And only after specific tests, does Extreme Components start the production.
Item #: PROT-ENG R3
Condition:
New
On-hand inventory ships within 24 hours: When out of stock delivery times can vary from 2 to 6 weeks Please note supply-chain related delays are possible.
Price: $518.70
Description:
Extreme Components Engine protectors for Yamaha R6 (2007/2020) - pick up + alternator + clutch - PROT-ENG R6
-Made In Italy
-Research and development takes place exclusively through collaboration with the best race teams engaged for years in the most prestigious national and world competitions; And only after specific tests, does Extreme Components start the production.
-Made In Italy
-Research and development takes place exclusively through collaboration with the best race teams engaged for years in the most prestigious national and world competitions; And only after specific tests, does Extreme Components start the production.
Item #: PROT-ENG R6
Condition:
New
On-hand inventory ships within 24 hours: When out of stock delivery times can vary from 2 to 6 weeks Please note supply-chain related delays are
possible.
Price: $318.00
Description:
Extreme Components Engine protector for Kawasaki Ninja 300 (2015/2017) - alternator - ALTER NJ15
-Made In Italy
-Research and development takes place exclusively through collaboration with the best race teams engaged for years in the most prestigious national and world competitions; And only after specific tests, does Extreme Components start the production.
-Made In Italy
-Research and development takes place exclusively through collaboration with the best race teams engaged for years in the most prestigious national and world competitions; And only after specific tests, does Extreme Components start the production.
Item #: ALTER NJ15
Condition:
New
On-hand inventory ships within 24 hours: When out of stock delivery times can vary from 2 to 6 weeks Please note supply-chain related delays are possible.
Price: $298.20
Description:
Extreme Components Engine protector in aluminium fully whole billet with 3d machining - pick up for BMW S1000RR (2009/2018) - PICK UP S1000RR
-Made In Italy
-Research and development takes place exclusively through collaboration with the best race teams engaged for years in the most prestigious national and world competitions; And only after specific tests, does Extreme Components start the production.
-Made In Italy
-Research and development takes place exclusively through collaboration with the best race teams engaged for years in the most prestigious national and world competitions; And only after specific tests, does Extreme Components start the production.
Item #: PICK UP S1000RR
Condition:
New
On-hand inventory ships within 24 hours: When out of stock delivery times can vary from 2 to 6 weeks Please note supply-chain related delays are possible.
Price: $119.25
Description:
Extreme Components Engine protector in aluminium fully whole billet with 3d machining - pick up for BMW S1000RR (2019/2020) - PICK UP S1000RR 19
-Made In Italy
-Research and development takes place exclusively through collaboration with the best race teams engaged for years in the most prestigious national and world competitions; And only after specific tests, does Extreme Components start the production.
-Made In Italy
-Research and development takes place exclusively through collaboration with the best race teams engaged for years in the most prestigious national and world competitions; And only after specific tests, does Extreme Components start the production.
Item #: PICK UP S1000RR 19
Condition:
New
On-hand inventory ships within 24 hours: When out of stock delivery times can vary from 2 to 6 weeks Please note supply-chain related delays are possible.
Price: $145.75
Description:
Extreme Components Engine protector in aluminium fully whole billet with 3d machining - pick up for Honda CBR 1000 RR-R / SP (2020) - PICK UP CBR 1000RR-R
-Made In Italy
-Research and development takes place exclusively through collaboration with the best race teams engaged for years in the most prestigious national and world competitions; And only after specific tests, does Extreme Components start the production.
-Made In Italy
-Research and development takes place exclusively through collaboration with the best race teams engaged for years in the most prestigious national and world competitions; And only after specific tests, does Extreme Components start the production.
Item #: PICK UP CBR 1000RR-R
Condition:
New
On-hand inventory ships within 24 hours: When out of stock delivery times can vary from 2 to 6 weeks Please note supply-chain related delays are possible.
Price: $132.50
Description:
Extreme Components Engine protector in aluminium fully whole billet with 3d machining - pick up for Kawasaki ZX 10 R (2016/2020) - PICK UP ZX10R
-Made In Italy
-Research and development takes place exclusively through collaboration with the best race teams engaged for years in the most prestigious national and world competitions; And only after specific tests, does Extreme Components start the production.
-Made In Italy
-Research and development takes place exclusively through collaboration with the best race teams engaged for years in the most prestigious national and world competitions; And only after specific tests, does Extreme Components start the production.
Item #: PICK UP ZX10R
Condition:
New
On-hand inventory ships within 24 hours: When out of stock delivery times can vary from 2 to 6 weeks Please note supply-chain related delays are possible.
Price: $132.50
Description:
Extreme Components Engine protector in aluminium fully whole billet with 3d machining - pick up for Yamaha R1 (2015/2020) - PICK UP R1
-Made In Italy
-Research and development takes place exclusively through collaboration with the best race teams engaged for years in the most prestigious national and world competitions; And only after specific tests, does Extreme Components start the production.
-Made In Italy
-Research and development takes place exclusively through collaboration with the best race teams engaged for years in the most prestigious national and world competitions; And only after specific tests, does Extreme Components start the production.
Item #: PICK UP R1
Condition:
New
On-hand inventory ships within 24 hours: When out of stock delivery times can vary from 2 to 6 weeks Please note supply-chain related delays are possible.
Price: $132.50
V4R Clutch Cover set
Description:
Extreme Components Engine protectors in aluminum fully whole billet with 3d machining 2 PIECE for Ducati PANIGALE V4R (2019/2023) (clutch + alternator) - PROT-ENG PANV4R
-Made In Italy
-Research and development takes place exclusively through collaboration with the best race teams engaged for years in the most prestigious national and world competitions; And only after specific tests, does Extreme Components start the production.
-Made In Italy
-Research and development takes place exclusively through collaboration with the best race teams engaged for years in the most prestigious national and world competitions; And only after specific tests, does Extreme Components start the production.
Item #: PROT-ENG PANV4R
Condition:
New
On-hand inventory ships within 24 hours: When out of stock delivery times can vary from 2 to 6 weeks Please note supply-chain related delays are possible.
Price: $424.00
Description:
Extreme Components Engine protector in aluminium fully whole billet with 3d machining 2 PIECE for Kawasaki Ninja 400 (2018/2020) (alternator + clutch) - PROT-ENG 2 NJ40
-Made In Italy
-Research and development takes place exclusively through collaboration with the best race teams engaged for years in the most prestigious national and world competitions; And only after specific tests, does Extreme Components start the production.
-Made In Italy
-Research and development takes place exclusively through collaboration with the best race teams engaged for years in the most prestigious national and world competitions; And only after specific tests, does Extreme Components start the production.
Item #: PROT-ENG 2 NJ40
Condition:
New
On-hand inventory ships within 24 hours: When out of stock delivery times can vary from 2 to 6 weeks Please note supply-chain related delays are possible.
Price: $567.00
Description:
Extreme Components Engine protector in aluminium fully whole billet with 3d machining 2 PIECE for KTM 250/390RC (2015/2020) (alternator + clutch) - PROT-ENG 2 K2539
-Made In Italy
-Research and development takes place exclusively through collaboration with the best race teams engaged for years in the most prestigious national and world competitions; And only after specific tests, does Extreme Components start the production.
-Made In Italy
-Research and development takes place exclusively through collaboration with the best race teams engaged for years in the most prestigious national and world competitions; And only after specific tests, does Extreme Components start the production.
Item #: PROT-ENG 2 K2539
Condition:
New
On-hand inventory ships within 24 hours: When out of stock delivery times can vary from 2 to 6 weeks Please note supply-chain related delays are possible.
Price: $390.88
Description:
Extreme Components Engine protector in aluminium fully whole billet with 3d machining 2 PIECE for KTM Moto3 250 (2015/2020) (alternator + clutch) - PROT-ENG 2 K25MT3
-Made In Italy
-Research and development takes place exclusively through collaboration with the best race teams engaged for years in the most prestigious national and world competitions; And only after specific tests, does Extreme Components start the production.
-Made In Italy
-Research and development takes place exclusively through collaboration with the best race teams engaged for years in the most prestigious national and world competitions; And only after specific tests, does Extreme Components start the production.
Item #: PROT-ENG 2 K25MT3
Condition:
New
On-hand inventory ships within 24 hours: When out of stock delivery times can vary from 2 to 6 weeks Please note supply-chain related delays are possible.
Price: $377.63
Description:
Extreme Components Engine protector in aluminium fully whole billet with 3d machining 2 PIECE for Yamaha Pre Moto 3 250 (2019/2020) (clutch + alternator) - PROT-ENG 2 YPM3
-Made In Italy
-Research and development takes place exclusively through collaboration with the best race teams engaged for years in the most prestigious national and world competitions; And only after specific tests, does Extreme Components start the production.
-Made In Italy
-Research and development takes place exclusively through collaboration with the best race teams engaged for years in the most prestigious national and world competitions; And only after specific tests, does Extreme Components start the production.
Item #: PROT-ENG 2 YPM3
Condition:
New
On-hand inventory ships within 24 hours: When out of stock delivery times can vary from 2 to 6 weeks Please note supply-chain related delays are possible.
Price: $357.75
Description:
Extreme Components Engine protectors in aluminium fully whole billet with 3d machining 3 PIECE for BMW S1000RR (2009/2018) (pick up + alternator + clutch) - PROT-ENG 3 S1000RR
-Made In Italy
-Research and development takes place exclusively through collaboration with the best race teams engaged for years in the most prestigious national and world competitions; And only after specific tests, does Extreme Components start the production.
-Made In Italy
-Research and development takes place exclusively through collaboration with the best race teams engaged for years in the most prestigious national and world competitions; And only after specific tests, does Extreme Components start the production.
Item #: PROT-ENG 3 S1000RR
Condition:
New
On-hand inventory ships within 24 hours: When out of stock delivery times can vary from 2 to 6 weeks Please note supply-chain related delays are possible.
Price: $394.85
Description:
Extreme Components Engine protectors in aluminium fully whole billet with 3d machining 3 PIECE for Yamaha R1 (2015/2020) (pick up + alternator + clutch) - PROT-ENG R1
-Made In Italy
-Research and development takes place exclusively through collaboration with the best race teams engaged for years in the most prestigious national and world competitions; And only after specific tests, does Extreme Components start the production.
-Made In Italy
-Research and development takes place exclusively through collaboration with the best race teams engaged for years in the most prestigious national and world competitions; And only after specific tests, does Extreme Components start the production.
Item #: PROT-ENG R1
Condition:
New
On-hand inventory ships within 24 hours: When out of stock delivery times can vary from 2 to 6 weeks Please note supply-chain related delays are
possible.
Price: $424.00
Description:
Extreme Components Engine protectors in aluminium fully whole billet with 3d machining 2 PIECE for Ducati Panigale V4 / V4S / V4R and Streetfighter V4/ V4S (2018/2020) (clutch + alternator) - PROT-ENG PANV4
-Made In Italy
-Research and development takes place exclusively through collaboration with the best race teams engaged for years in the most prestigious national and world competitions; And only after specific tests, does Extreme Components start the production.
-Made In Italy
-Research and development takes place exclusively through collaboration with the best race teams engaged for years in the most prestigious national and world competitions; And only after specific tests, does Extreme Components start the production.
Item #: PROT-ENG PANV4
Condition:
New
On-hand inventory ships within 24 hours: When out of stock delivery times can vary from 2 to 6 weeks Please note supply-chain related delays are possible.
Price: $390.88
Description:
Extreme Components Engine protector for Suzuki GSXR 1000 (2017/2020) - pick up - PICK UP GSXR1000
-Made In Italy
-Research and development takes place exclusively through collaboration with the best race teams engaged for years in the most prestigious national and world competitions; And only after specific tests, does Extreme Components start the production.
-Made In Italy
-Research and development takes place exclusively through collaboration with the best race teams engaged for years in the most prestigious national and world competitions; And only after specific tests, does Extreme Components start the production.
Item #: PICK UP GSXR1000
Condition:
New
On-hand inventory ships within 24 hours: When out of stock delivery times can vary from 2 to 6 weeks Please note supply-chain related delays are possible.
Price: $137.80
Description:
Extreme Components Engine protector for Suzuki GSXR 1000 (2017/2020) - alternator - ALTER GSXR1000
-Made In Italy
-Research and development takes place exclusively through collaboration with the best race teams engaged for years in the most prestigious national and world competitions; And only after specific tests, does Extreme Components start the production.
-Made In Italy
-Research and development takes place exclusively through collaboration with the best race teams engaged for years in the most prestigious national and world competitions; And only after specific tests, does Extreme Components start the production.
Item #: ALTER GSXR1000
Condition:
New
On-hand inventory ships within 24 hours: When out of stock delivery times can vary from 2 to 6 weeks Please note supply-chain related delays are possible.
Price: $137.80
Description:
Extreme Components Engine protector for Suzuki GSXR 1000 (2017/2020) - clutch - CLUTCH GSXR1000
-Made In Italy
-Research and development takes place exclusively through collaboration with the best race teams engaged for years in the most prestigious national and world competitions; And only after specific tests, does Extreme Components start the production.
-Made In Italy
-Research and development takes place exclusively through collaboration with the best race teams engaged for years in the most prestigious national and world competitions; And only after specific tests, does Extreme Components start the production.
Item #: CLUTCH GSXR1000
Condition:
New
On-hand inventory ships within 24 hours: When out of stock delivery times can vary from 2 to 6 weeks Please note supply-chain related delays are possible.
Price: $186.83
Description:
Extreme Components Engine protector in aluminium fully whole billet with 3d machining - water pump for BMW S1000RR (2019/2020) - PUMP S1000RR 19
-Made In Italy
-Research and development takes place exclusively through collaboration with the best race teams engaged for years in the most prestigious national and world competitions; And only after specific tests, does Extreme Components start the production.
-Made In Italy
-Research and development takes place exclusively through collaboration with the best race teams engaged for years in the most prestigious national and world competitions; And only after specific tests, does Extreme Components start the production.
Item #: PUMP S1000RR 19
Condition:
New
On-hand inventory ships within 24 hours: When out of stock delivery times can vary from 2 to 6 weeks Please note supply-chain related delays are possible.
Price: $106.00
Items 1-60 of 72
- Page 1 of 2
- Next
Popular Brands:
More About Crash Protection & Safety
At HHR Performance, we understand how dangerous it can be when you’re racing—we’re racers, ourselves, after all. This is why you’ll find various motorcycle crash protection products housed here. We carefully watch the professionals and use our personal experience on the racetrack to inform the high-end selection of bike protective gear we curate for racers and enthusiasts alike. As a result, we carry the best sliders, guards, covers, and protectors utilized by some of the greatest motorsport racers.
Keep yourself safe while emulating the magnificent machines used by the pros with our motorcycle bike and crash protection products!?
Keep yourself safe while emulating the magnificent machines used by the pros with our motorcycle bike and crash protection products!?