HHR Performance - Bodywork
HHR Performance only carries aftermarket motorcycle bodywork, fairings, and windshields that are of the highest quality. We carry options such as Carbonin carbon fiber and Avio fiber race bodywork, as well as MRA race screens which are utilized by some of the world’s top-performing race teams. Shop our selection of aftermarket motorcycle fairings and bodywork below.
Browse Bodywork Products
Description:
Carbonin Avio Fiber Airbox Cover with Side Panels 2021 Honda CBR1000RR-R H20425AF
-will not fit with other brands or with your OEM tail unit
-Required for fitment with Carbonin 2021 Honda CBR1000RR-R tail unit in Carbon Fiber CH20300 or Avio Fiber H20300AF due to the mounting design
-Does not include Required Brackets for Airbox Cover (2 pcs) IN2001H
-will not fit with other brands or with your OEM tail unit
-Required for fitment with Carbonin 2021 Honda CBR1000RR-R tail unit in Carbon Fiber CH20300 or Avio Fiber H20300AF due to the mounting design
-Does not include Required Brackets for Airbox Cover (2 pcs) IN2001H
Item #: H20425AF
Condition:
New
In Stock inventory ships within 24 hours. Avio Fiber has a typical eta of 4-6 weeks, Carbon Fiber can take up to 8 weeks due to production times. Please note supply-chain related delays are possible.
Price: $257.37
MV Agusta
Description:
Aluminum brackets for side panels *required
Item #: ALU2112MV
Condition:
New
In Stock inventory ships within 24 hours. Avio Fiber has a typical eta of 4-6 weeks, Carbon Fiber can take up to 8 weeks due to production times. Please note supply-chain related delays are possible.
Price: $83.37
Description:
R1 seat for Carbonin bodywork
Pictures are shown for reference only and may not accurately represent the exact model of your seat
Pictures are shown for reference only and may not accurately represent the exact model of your seat
Item #: FM1910YS
Condition:
New
In Stock inventory ships within 24 hours. Avio Fiber has a typical eta of 4-6 weeks, Carbon Fiber can take up to 8 weeks due to production times. Please note supply-chain related delays are possible.
Price: $136.42
Description:
Carbonin Avio Fiber Front Fender 09-14 Yamaha YZF-R1
Item #: Y14010AF
Condition:
New
In Stock inventory ships within 24 hours. Avio Fiber has a typical eta of 4-6 weeks, Carbon Fiber can take up to 8 weeks due to production times. Please note supply-chain related delays are possible.
Price: $120.02
Description:
ZX10r front fender for racing
Item #: K18010AF
Condition:
New
Limited Supply: Only 2 Left!
In Stock inventory ships within 24 hours. Avio Fiber has a typical eta of 4-6 weeks, Carbon Fiber can take up to 8 weeks due to production times. Please note supply-chain related delays are possible.
Price: $126.68
Description:
Gsxr600/750 front fender for racing
Item #: S10010AF
Condition:
New
Limited Supply: Only 1 Left!
In Stock inventory ships within 24 hours. Avio Fiber has a typical eta of 4-6 weeks, Carbon Fiber can take up to 8 weeks due to production times. Please note supply-chain related delays are possible.
Price: $113.35
Description:
2020 S1000rr front fender for racing
Item #: B4010AF
Condition:
New
In Stock inventory ships within 24 hours. Avio Fiber has a typical eta of 4-6 weeks, Carbon Fiber can take up to 8 weeks due to production times. Please note supply-chain related delays are possible.
Price: $140.02
Description:
Carbonin Avio Fiber Front Fender Yamaha 17-20 R6, 15-20 R1
Item #: Y19010AF
Condition:
New
In Stock inventory ships within 24 hours. Avio Fiber has a typical eta of 4-6 weeks, Carbon Fiber can take up to 8 weeks due to production times. Please note supply-chain related delays are possible.
Price: $117.61
Description:
Replacement left side fairing with Dzus
Item #: K18231AF
Condition:
New
In Stock inventory ships within 24 hours. Avio Fiber has a typical eta of 4-6 weeks, Carbon Fiber can take up to 8 weeks due to production times. Please note supply-chain related delays are possible.
Price: $205.36
ZX10R
Description:
Replacement Left side Fairing For Carbonin complete fairing, will not fit with other brands or OEM
Item #: K22231AF
Condition:
New
In Stock inventory ships within 24 hours. Avio Fiber has a typical eta of 4-6 weeks, Carbon Fiber can take up to 8 weeks due to production times. Please note supply-chain related delays are possible.
Price: $289.56
Description:
Replacement left side panel
Item #: D4231AF
Condition:
New
In Stock inventory ships within 24 hours. Avio Fiber has a typical eta of 4-6 weeks, Carbon Fiber can take up to 8 weeks due to production times. Please note supply-chain related delays are possible.
Price: $313.37
ZX10r Replacement Carbon race lower
Description:
Replacement lower race Fairing For Carbonin complete fairing, will not fit with other brands or oem fairing
This will work with Kickstand
This will work with Kickstand
Item #: K22220AF
Condition:
New
In Stock inventory ships within 24 hours. Avio Fiber has a typical eta of 4-6 weeks, Carbon Fiber can take up to 8 weeks due to production times. Please note supply-chain related delays are possible.
Price: $208.53
Description:
R1 seat for Carbonin bodywork long version covers the back of the tail
Picture is of a Customer Customers seat and is an example to show you the embroidery.
You can supply a logo or we can embroider your Name or Number on your seat. additional logos are $50 please contact us arrange an extra logo
Picture is of a Customer Customers seat and is an example to show you the embroidery.
You can supply a logo or we can embroider your Name or Number on your seat. additional logos are $50 please contact us arrange an extra logo
Item #: FM1960YL
Condition:
New
In Stock inventory ships within 24 hours. Avio Fiber has a typical eta of 4-6 weeks, Carbon Fiber can take up to 8 weeks due to production times. Please note supply-chain related delays are possible.
Price: $325.37
Description:
Parts Included In Complete Fairing:
• Upper Race Fairing (6 Dzus)
• Lower Fairing (5 Dzus)
• Left Side Panel
• Right Side Panel
• Superbike Tail
• Upper Race Fairing (6 Dzus)
• Lower Fairing (5 Dzus)
• Left Side Panel
• Right Side Panel
• Superbike Tail
Item #: Y12100AF
Condition:
New
In Stock inventory ships within 24 hours. Avio Fiber has a typical eta of 4-6 weeks, Carbon Fiber can take up to 8 weeks due to production times. Please note supply-chain related delays are possible.
Price: $993.46
RSV4 bodywork, Carbonin
Description:
Description
Parts Included In Complete Race Fairing:
• Upper Race Fairing (6 Dzus)
• Lower Fairing
• Left Side Panel (2 Dzus)
• Right Side Panel (2 Dzus)
• Single Race Seat (2 Pcs)
Parts Included In Complete Race Fairing:
• Upper Race Fairing (6 Dzus)
• Lower Fairing
• Left Side Panel (2 Dzus)
• Right Side Panel (2 Dzus)
• Single Race Seat (2 Pcs)
Item #: A5100AF
Condition:
New
In Stock inventory ships within 24 hours. Avio Fiber has a typical eta of 4-6 weeks, Carbon Fiber can take up to 8 weeks due to production times. Please note supply-chain related delays are possible.
Price: $985.46
R1, bodywork, carbonin,
Description:
Parts Included with Kit
• upper race faring (4 Dzus)
• lower fairing
• left side panel with optional ecu or rectifier housing. ecu for oem placement or Race for the YEC harness which houses the regulator rectifier
• right side panel
• single race seat (3 pcs) Standard seat can be used but you need to modify the battery retention plate
*Optional Airbox Cover w/ Integrated side panels show in picture above Not included Y16425AF
• upper race faring (4 Dzus)
• lower fairing
• left side panel with optional ecu or rectifier housing. ecu for oem placement or Race for the YEC harness which houses the regulator rectifier
• right side panel
• single race seat (3 pcs) Standard seat can be used but you need to modify the battery retention plate
*Optional Airbox Cover w/ Integrated side panels show in picture above Not included Y16425AF
Item #: Y16100AF
Condition:
New
In Stock inventory ships within 24 hours. Avio Fiber has a typical eta of 4-6 weeks, Carbon Fiber can take up to 8 weeks due to production times. Please note supply-chain related delays are possible.
Price: $996.12
R3, Carbonin, Bodywork
Description:
Parts Included In Complete Race Fairing:
Upper Race Faring (6 Dzus) fits oem screen
Lower Fairing
Left Side Panel (2 Dzus)
Right Side Panel (4 Dzus)
Single Race Seat (2 Pcs) Seat support and Superbike tail which provides a much better riding position for the racers ergonomics
Tank Cover (Oem)
This kit utilizes the oem trim panels for the inner leg area , there are provisions for these to attach to the upper fairing and side panels
Upper Race Faring (6 Dzus) fits oem screen
Lower Fairing
Left Side Panel (2 Dzus)
Right Side Panel (4 Dzus)
Single Race Seat (2 Pcs) Seat support and Superbike tail which provides a much better riding position for the racers ergonomics
Tank Cover (Oem)
This kit utilizes the oem trim panels for the inner leg area , there are provisions for these to attach to the upper fairing and side panels
Item #: Y17100AF
Condition:
New
In Stock inventory ships within 24 hours. Avio Fiber has a typical eta of 4-6 weeks, Carbon Fiber can take up to 8 weeks due to production times. Please note supply-chain related delays are possible.
Price: $1,081.47
CBR1000RR, Carbonin, bodywork,fairing
Description:
• Upper Race Fairing (4 Dzus)
• Lower Fairing (4 Dzus)
• Left Side Panel
• Right Side Panel
• Single Race Seat (2 Pcs)
• Fuel Tank Cover (Oem; 4 Dzus]
Additional parts needed
Part needed to fit complete race fairing:
• aluminium inserts for seat unit (4 pcs)
*To Fit Seat Pan Brackets are Required
• Lower Fairing (4 Dzus)
• Left Side Panel
• Right Side Panel
• Single Race Seat (2 Pcs)
• Fuel Tank Cover (Oem; 4 Dzus]
Additional parts needed
Part needed to fit complete race fairing:
• aluminium inserts for seat unit (4 pcs)
*To Fit Seat Pan Brackets are Required
Item #: H18100AF
Condition:
New
In Stock inventory ships within 24 hours. Avio Fiber has a typical eta of 4-6 weeks, Carbon Fiber can take up to 8 weeks due to production times. Please note supply-chain related delays are possible.
Price: $1,212.15
GSXR 1000
Description:
Parts Included In Complete Race Fairing:
• Upper Race Fairing (6 Dzus)
• Lower Fairing (5 Dzus)
• Left Side Panel
• Right Side Panel
• Single Race Seat With Fuel Tank Panels (4 Pcs; 1 Dzus)
The 2017-2021 GSXR1000 Bodywork requires the following bracketry for fitment:
Aluminum CNC Inserts Side Panels (ALU1202S)
Inox Holders for Lower Fairing (IN1202S)
The The 2017-2021 GSXR1000 Bodywork also will require 1 of the 2 following tail unit inserts:
Aluminum CNC Tail Inserts Quick Release (Quick Release Bracket w/ DZUS) (ALU1204SCNC)
Aluminum CNC Tail Inserts Bolt On (Hard Mount w/ Bolt) (ALU1204SR)
There are 3 seat options available.
Basic - This seat is a 15mm neoprene foam glued to a base that is molded from the seat pan of the tail section and then attaches to the seat pan with bolts. Please not that these seat's will only fit Carbonin seat pans and seat units. It will not work on any other brand. This foam will wear out like any other foam pad.
Standard - This is an upgrade to the basic seat which is covered in a neoprene material that protects the basic foam and provides the rider a level of grip but without compromising the need to slide side to side. It looks much more professional and will protect the basic foam from any wear from patches on leather suits or abuse from side to side movements. we have seen these seats go on for 3 seasons or more!
Pro Seat - This seat is for riders or teams that require their seat to provide back support or a step seat to keep them in a position from sliding too far back in the seat under acceleration, this is often done with a raised section so they can still get back in the seat in the full tuck, they are just raised up more which helps keep the butt up and their head shoulders and chest lower in the tuck. It is the same material as the standard seat but can also be customized with team logo's or race number -If you purchase a pro seat we will contact you to design your seat. Please note pro seats are made custom to order
Carbonin Tail unit will not work with OEM Seat.
• Upper Race Fairing (6 Dzus)
• Lower Fairing (5 Dzus)
• Left Side Panel
• Right Side Panel
• Single Race Seat With Fuel Tank Panels (4 Pcs; 1 Dzus)
The 2017-2021 GSXR1000 Bodywork requires the following bracketry for fitment:
Aluminum CNC Inserts Side Panels (ALU1202S)
Inox Holders for Lower Fairing (IN1202S)
The The 2017-2021 GSXR1000 Bodywork also will require 1 of the 2 following tail unit inserts:
Aluminum CNC Tail Inserts Quick Release (Quick Release Bracket w/ DZUS) (ALU1204SCNC)
Aluminum CNC Tail Inserts Bolt On (Hard Mount w/ Bolt) (ALU1204SR)
There are 3 seat options available.
Basic - This seat is a 15mm neoprene foam glued to a base that is molded from the seat pan of the tail section and then attaches to the seat pan with bolts. Please not that these seat's will only fit Carbonin seat pans and seat units. It will not work on any other brand. This foam will wear out like any other foam pad.
Standard - This is an upgrade to the basic seat which is covered in a neoprene material that protects the basic foam and provides the rider a level of grip but without compromising the need to slide side to side. It looks much more professional and will protect the basic foam from any wear from patches on leather suits or abuse from side to side movements. we have seen these seats go on for 3 seasons or more!
Pro Seat - This seat is for riders or teams that require their seat to provide back support or a step seat to keep them in a position from sliding too far back in the seat under acceleration, this is often done with a raised section so they can still get back in the seat in the full tuck, they are just raised up more which helps keep the butt up and their head shoulders and chest lower in the tuck. It is the same material as the standard seat but can also be customized with team logo's or race number -If you purchase a pro seat we will contact you to design your seat. Please note pro seats are made custom to order
Carbonin Tail unit will not work with OEM Seat.
Item #: S12100AF
Condition:
New
In Stock inventory ships within 24 hours. Avio Fiber has a typical eta of 4-6 weeks, Carbon Fiber can take up to 8 weeks due to production times. Please note supply-chain related delays are possible.
Price: $1,210.77
R1, Carbonin, bodywork, fairing
Description:
Parts Included In Complete Race Fairing:
• Upper Race Fairing (6 Dzus)
• Lower Fairing
• Left Side Panel (3 Dzus)
• Right Side Panel (3 Dzus)
• Single Race Tail (4 Pcs)
Not included but required:
IN1901Y Seat Bracket
*Cannot use theOEM Seat with this tail
• Upper Race Fairing (6 Dzus)
• Lower Fairing
• Left Side Panel (3 Dzus)
• Right Side Panel (3 Dzus)
• Single Race Tail (4 Pcs)
Not included but required:
IN1901Y Seat Bracket
*Cannot use theOEM Seat with this tail
Item #: Y19200AF
Condition:
New
In Stock inventory ships within 24 hours. Avio Fiber has a typical eta of 4-6 weeks, Carbon Fiber can take up to 8 weeks due to production times. Please note supply-chain related delays are possible.
Price: $1,198.82
BMW S1000RR, Carbonin, bodywork, fairing
Description:
If you are running and over sized Radiator such as the Febur/H20/Taleo then you will want to order this kit, Version 1 fits the oem radiator so would require more trimming.
Parts Included In Complete Race Fairing Version 2:
• Upper Race Fairing (6 Dzus)
• Lower Fairing (Big Radiator; 6 Dzus)
• Left Side Panel (Big Radiator)
• Right Side Panel (Big Radiator)
• Single Race Seat (3 Pcs)
Please Note that this Kit requires complete bracket kit for fitment, Carbonin Bodywork Complete Bracket Kit 2015-2019 BMW S1000RR (ALU3113B)
Parts Included In Complete Race Fairing Version 2:
• Upper Race Fairing (6 Dzus)
• Lower Fairing (Big Radiator; 6 Dzus)
• Left Side Panel (Big Radiator)
• Right Side Panel (Big Radiator)
• Single Race Seat (3 Pcs)
Please Note that this Kit requires complete bracket kit for fitment, Carbonin Bodywork Complete Bracket Kit 2015-2019 BMW S1000RR (ALU3113B)
Item #: B3101AF
Condition:
New
In Stock inventory ships within 24 hours. Avio Fiber has a typical eta of 4-6 weeks, Carbon Fiber can take up to 8 weeks due to production times. Please note supply-chain related delays are possible.
Price: $1,028.13
R1,R1M,Carbonin,bodywork,fairing
Description:
Parts Included In Complete Race Fairing:
• Upper Race Fairing (6 Dzus)
• Lower Fairing designed for H20 Oversized radiator
• Left Side Panel (3 Dzus) designed for H20 Oversized radiator
• Right Side Panel (3 Dzus) designed for H20 Oversized radiator
• Single Race Tail (4 Pcs)
• Upper Race Fairing (6 Dzus)
• Lower Fairing designed for H20 Oversized radiator
• Left Side Panel (3 Dzus) designed for H20 Oversized radiator
• Right Side Panel (3 Dzus) designed for H20 Oversized radiator
• Single Race Tail (4 Pcs)
Item #: Y192200AF
Condition:
New
In Stock inventory ships within 24 hours. Avio Fiber has a typical eta of 4-6 weeks, Carbon Fiber can take up to 8 weeks due to production times. Please note supply-chain related delays are possible.
Price: $1,198.82
1199,1299,bodywork,fairings,carbonin
Description:
Upper Race Fairing
Left Side Panel
Right Side Panel
Race Seat Unit (3 Pcs) Uses oem Seat
Parts needed to fit complete race fairing: when fitting to 1299 Panigale Aluminum dashboard stay (only required when installing to 1299) Optional for 1199 and 899
This bodywork uses the oem Dzus fasteners from oem bodywork.
This kit was designed for a 1199 and can be mounted to a 1299 with the fairing bracket and air tube however you will need to order a windshield for a 1199 Panigale
Left Side Panel
Right Side Panel
Race Seat Unit (3 Pcs) Uses oem Seat
Parts needed to fit complete race fairing: when fitting to 1299 Panigale Aluminum dashboard stay (only required when installing to 1299) Optional for 1199 and 899
This bodywork uses the oem Dzus fasteners from oem bodywork.
This kit was designed for a 1199 and can be mounted to a 1299 with the fairing bracket and air tube however you will need to order a windshield for a 1199 Panigale
Item #: D4100AF
Condition:
New
In Stock inventory ships within 24 hours. Avio Fiber has a typical eta of 4-6 weeks, Carbon Fiber can take up to 8 weeks due to production times. Please note supply-chain related delays are possible.
Price: $1,164.15
MV F3,bodywork,carbonin
Description:
Parts Included In Complete Race Fairing:
• Upper Race Fairing (8 Dzus)
• Lower Fairing (4 Dzus)
• Left Side Panel
• Right Side Panel
• Single Race Seat (2 Pcs; 5 Dzus)
Required fitment kit to mount this fairing
• Aluminum support for side panels (2 pcs with 2 Dzus)
• air box inlet tubes
• Upper Race Fairing (8 Dzus)
• Lower Fairing (4 Dzus)
• Left Side Panel
• Right Side Panel
• Single Race Seat (2 Pcs; 5 Dzus)
Required fitment kit to mount this fairing
• Aluminum support for side panels (2 pcs with 2 Dzus)
• air box inlet tubes
Item #: MV2101AF
Condition:
New
In Stock inventory ships within 24 hours. Avio Fiber has a typical eta of 4-6 weeks, Carbon Fiber can take up to 8 weeks due to production times. Please note supply-chain related delays are possible.
Price: $1,121.47
Description:
S1000rr rear fender in avio fiber
Item #: B4020AF
Condition:
New
In Stock inventory ships within 24 hours. Avio Fiber has a typical eta of 4-6 weeks, Carbon Fiber can take up to 8 weeks due to production times. Please note supply-chain related delays are possible.
Price: $132.02
Description:
Replacement Right side panel
Item #: D4232AF
Condition:
New
In Stock inventory ships within 24 hours. Avio Fiber has a typical eta of 4-6 weeks, Carbon Fiber can take up to 8 weeks due to production times. Please note supply-chain related delays are possible.
Price: $313.37
Description:
Replacement winglet for carbonin tail unit
Item #: Y19312AF
Condition:
New
In Stock inventory ships within 24 hours. Avio Fiber has a typical eta of 4-6 weeks, Carbon Fiber can take up to 8 weeks due to production times. Please note supply-chain related delays are possible.
Price: $80.09
Description:
Replacement winglet for carbonin tail unit
Item #: Y19311AF
Condition:
New
In Stock inventory ships within 24 hours. Avio Fiber has a typical eta of 4-6 weeks, Carbon Fiber can take up to 8 weeks due to production times. Please note supply-chain related delays are possible.
Price: $80.09
Description:
R1 seat for Carbonin bodywork long version covers the back of the tail
Pictures are shown for reference only and may not accurately represent the exact model of your seat
Pictures are shown for reference only and may not accurately represent the exact model of your seat
Item #: FM1950YL
Condition:
New
In Stock inventory ships within 24 hours. Avio Fiber has a typical eta of 4-6 weeks, Carbon Fiber can take up to 8 weeks due to production times. Please note supply-chain related delays are possible.
Price: $238.70
Description:
Replacement Superbike Tail unit
Item #: K18300AF
Condition:
New
In Stock inventory ships within 24 hours. Avio Fiber has a typical eta of 4-6 weeks, Carbon Fiber can take up to 8 weeks due to production times. Please note supply-chain related delays are possible.
Price: $588.01
Description:
3 piece tail unit *requires bracket IN4114D for installation
Item #: D4300AF
Condition:
New
In Stock inventory ships within 24 hours. Avio Fiber has a typical eta of 4-6 weeks, Carbon Fiber can take up to 8 weeks due to production times. Please note supply-chain related delays are possible.
Price: $298.70
Description:
Replacement Upper Fairing
Item #: D4210AF
Condition:
New
In Stock inventory ships within 24 hours. Avio Fiber has a typical eta of 4-6 weeks, Carbon Fiber can take up to 8 weeks due to production times. Please note supply-chain related delays are possible.
Price: $306.71
Description:
R1 seat for Carbonin bodywork long version covers the back of the tail
Pictures are shown for reference only and may not accurately represent the exact model of your seat
Pictures are shown for reference only and may not accurately represent the exact model of your seat
Item #: FM1910YL
Condition:
New
In Stock inventory ships within 24 hours. Avio Fiber has a typical eta of 4-6 weeks, Carbon Fiber can take up to 8 weeks due to production times. Please note supply-chain related delays are possible.
Price: $136.42
Description:
Carbonin Basic Seat Foam 2018-2020 Kawasaki ZX-400 Ninja FM1910K
Made to fit only Carbonin Bodywork
Made to fit only Carbonin Bodywork
Item #: FM1910K
Condition:
New
In Stock inventory ships within 24 hours. Avio Fiber has a typical eta of 4-6 weeks, Carbon Fiber can take up to 8 weeks due to production times. Please note supply-chain related delays are possible.
Price: $117.60
Description:
Lightweight Carbon fender Oem Replacement
Item #: CK18010
Condition:
New
In Stock inventory ships within 24 hours. Avio Fiber has a typical eta of 4-6 weeks, Carbon Fiber can take up to 8 weeks due to production times. Please note supply-chain related delays are possible.
Price: $236.03
Description:
Lightweight Carbon fender Oem Replacement
Item #: CS12010
Condition:
New
In Stock inventory ships within 24 hours. Avio Fiber has a typical eta of 4-6 weeks, Carbon Fiber can take up to 8 weeks due to production times. Please note supply-chain related delays are possible.
Price: $204.03
Description:
Lightweight Carbon fender Oem Replacement
Item #: CB4010
Condition:
New
In Stock inventory ships within 24 hours. Avio Fiber has a typical eta of 4-6 weeks, Carbon Fiber can take up to 8 weeks due to production times. Please note supply-chain related delays are possible.
Price: $260.83
Description:
Parts Included In Complete Race Faring:
• Upper Race Fairing (8 Dzus)
• Lower Fairing (4 Dzus)
• Left Side Panel
• Right Side Panel
• Single Race Seat (3 Pcs)
There are 3 options for seats
Basic - This seat is a 15mm neoprene foam glued to a base that is molded from the seat pan of the tail section and then attaches to the seat pan with bolts. Please not that these seat's will only fit carbonin seat pans and seat units. It will not work on any other brand. This foam will wear out like any other foam pad.
Standard - This is an upgrade to the basic seat which is covered in a neoprene material that protects the basic foam and provides the rider a level of grip but without compromising the need to slide side to side. It looks much more professional and will protect the basic foam from any wear from patches on leather suits or abuse from side to side movements. we have seen these seats go on for 3 seasons or more!
Pro Seat - This seat is for riders or teams that require their seat to provide back support or a step seat to keep them in a position from sliding too far back in the seat under acceleration, this is often done with a raised section so they can still get back in the seat in the full tuck, they are just raised up more which helps keep the butt up and their head shoulders and chest lower in the tuck. It is the same material as the standard seat but can also be customized with team logo's or race number -If you purchase a pro seat we will contact you to design your seat. Please note pro seats are made custom to order
• Upper Race Fairing (8 Dzus)
• Lower Fairing (4 Dzus)
• Left Side Panel
• Right Side Panel
• Single Race Seat (3 Pcs)
There are 3 options for seats
Basic - This seat is a 15mm neoprene foam glued to a base that is molded from the seat pan of the tail section and then attaches to the seat pan with bolts. Please not that these seat's will only fit carbonin seat pans and seat units. It will not work on any other brand. This foam will wear out like any other foam pad.
Standard - This is an upgrade to the basic seat which is covered in a neoprene material that protects the basic foam and provides the rider a level of grip but without compromising the need to slide side to side. It looks much more professional and will protect the basic foam from any wear from patches on leather suits or abuse from side to side movements. we have seen these seats go on for 3 seasons or more!
Pro Seat - This seat is for riders or teams that require their seat to provide back support or a step seat to keep them in a position from sliding too far back in the seat under acceleration, this is often done with a raised section so they can still get back in the seat in the full tuck, they are just raised up more which helps keep the butt up and their head shoulders and chest lower in the tuck. It is the same material as the standard seat but can also be customized with team logo's or race number -If you purchase a pro seat we will contact you to design your seat. Please note pro seats are made custom to order
Item #: CY14100
Condition:
New
In Stock inventory ships within 24 hours. Avio Fiber has a typical eta of 4-6 weeks, Carbon Fiber can take up to 8 weeks due to production times. Please note supply-chain related delays are possible.
Price: $2,028.25
RSV4,carbonin,carbon fiber,bodywork,fairing
Description:
Parts Included In Complete Race Fairing:
Upper Race Fairing (6 Dzus)
Lower Fairing
Left Side Panel (2 Dzus)
Right Side Panel (2 Dzus)
Single Race Seat (2 Pcs) There are 3 options for seats
• Basic - This seat is a 15mm neoprene foam glued to a base that is molded from the seat pan of the tail section and then attaches to the seat pan with bolts. Please not that these seat's will only fit carbonin seat pans and seat units. It will not work on any other brand. This foam will wear out like any other foam pad.
• Standard - This is an upgrade to the basic seat which is covered in a neoprene material that protects the basic foam and provides the rider a level of grip but without compromising the need to slide side to side. It looks much more professional and will protect the basic foam from any wear from patches on leather suits or abuse from side to side movements. we have seen these seats go on for 3 seasons or more!
• Pro Seat - This seat is for riders or teams that require their seat to provide back support or a step seat to keep them in a position from sliding too far back in the seat under acceleration, this is often done with a raised section so they can still get back in the seat in the full tuck, they are just raised up more which helps keep the butt up and their head shoulders and chest lower in the tuck. It is the same material as the standard seat but can also be customized with team logo's or race number -If you purchase a pro seat we will contact you to design your seat. Please note pro seats are made custom to order
Upper Race Fairing (6 Dzus)
Lower Fairing
Left Side Panel (2 Dzus)
Right Side Panel (2 Dzus)
Single Race Seat (2 Pcs) There are 3 options for seats
• Basic - This seat is a 15mm neoprene foam glued to a base that is molded from the seat pan of the tail section and then attaches to the seat pan with bolts. Please not that these seat's will only fit carbonin seat pans and seat units. It will not work on any other brand. This foam will wear out like any other foam pad.
• Standard - This is an upgrade to the basic seat which is covered in a neoprene material that protects the basic foam and provides the rider a level of grip but without compromising the need to slide side to side. It looks much more professional and will protect the basic foam from any wear from patches on leather suits or abuse from side to side movements. we have seen these seats go on for 3 seasons or more!
• Pro Seat - This seat is for riders or teams that require their seat to provide back support or a step seat to keep them in a position from sliding too far back in the seat under acceleration, this is often done with a raised section so they can still get back in the seat in the full tuck, they are just raised up more which helps keep the butt up and their head shoulders and chest lower in the tuck. It is the same material as the standard seat but can also be customized with team logo's or race number -If you purchase a pro seat we will contact you to design your seat. Please note pro seats are made custom to order
Item #: CA5200
Condition:
New
In Stock inventory ships within 24 hours. Avio Fiber has a typical eta of 4-6 weeks, Carbon Fiber can take up to 8 weeks due to production times. Please note supply-chain related delays are possible.
Price: $2,065.59
CBR1000RR,carbonin,carbonfiber,bodywork,fairing
Description:
Parts Included In Complete Race Fairing:
Upper Race Fairing (4 Dzus)
Lower Fairing (4 Dzus)
Left Side Panel
Right Side Panel
Single Race Seat (2 Pcs)
Fuel Tank Cover (Oem; 4 Dzus]
Optional
There are 3 options for seats
Basic - This seat is a 15mm neoprene foam glued to a base that is molded from the seat pan of the tail section and then attaches to the seat pan with bolts. Please not that these seat's will only fit carbonin seat pans and seat units. It will not work on any other brand. This foam will wear out like any other foam pad.
Standard - This is an upgrade to the basic seat which is covered in a neoprene material that protects the basic foam and provides the rider a level of grip but without compromising the need to slide side to side. It looks much more professional and will protect the basic foam from any wear from patches on leather suits or abuse from side to side movements. we have seen these seats go on for 3 seasons or more!
Pro Seat - This seat is for riders or teams that require their seat to provide back support or a step seat to keep them in a position from sliding too far back in the seat under acceleration, this is often done with a raised section so they can still get back in the seat in the full tuck, they are just raised up more which helps keep the butt up and their head shoulders and chest lower in the tuck. It is the same material as the standard seat but can also be customized with team logo's or race number -If you purchase a pro seat we will contact you to design your seat. Please note pro seats are made custom to order
Upper Race Fairing (4 Dzus)
Lower Fairing (4 Dzus)
Left Side Panel
Right Side Panel
Single Race Seat (2 Pcs)
Fuel Tank Cover (Oem; 4 Dzus]
Optional
There are 3 options for seats
Basic - This seat is a 15mm neoprene foam glued to a base that is molded from the seat pan of the tail section and then attaches to the seat pan with bolts. Please not that these seat's will only fit carbonin seat pans and seat units. It will not work on any other brand. This foam will wear out like any other foam pad.
Standard - This is an upgrade to the basic seat which is covered in a neoprene material that protects the basic foam and provides the rider a level of grip but without compromising the need to slide side to side. It looks much more professional and will protect the basic foam from any wear from patches on leather suits or abuse from side to side movements. we have seen these seats go on for 3 seasons or more!
Pro Seat - This seat is for riders or teams that require their seat to provide back support or a step seat to keep them in a position from sliding too far back in the seat under acceleration, this is often done with a raised section so they can still get back in the seat in the full tuck, they are just raised up more which helps keep the butt up and their head shoulders and chest lower in the tuck. It is the same material as the standard seat but can also be customized with team logo's or race number -If you purchase a pro seat we will contact you to design your seat. Please note pro seats are made custom to order
Item #: CH18100
Condition:
New
In Stock inventory ships within 24 hours. Avio Fiber has a typical eta of 4-6 weeks, Carbon Fiber can take up to 8 weeks due to production times. Please note supply-chain related delays are possible.
Price: $2,369.63
R1, Carbon Fiber, Bodywork,fairing,R1M
Description:
Parts Included In Complete Race Fairing:
• Upper Race Fairing (6 Dzus)
• Lower Fairing
• Left Side Panel for Big Radiator (3 Dzus)
• Right Side Panel for Big Radiator (3 Dzus)
• Single Race Tail (4 Pcs)
Not included
There are 3 options for seats
• Basic - This seat is a 15mm neoprene foam glued to a base that is molded from the seat pan of the tail section and then attaches to the seat pan with bolts. Please not that these seat's will only fit carbonin seat pans and seat units. It will not work on any other brand. This foam will wear out like any other foam pad.
• Standard - This is an upgrade to the basic seat which is covered in a neoprene material that protects the basic foam and provides the rider a level of grip but without compromising the need to slide side to side. It looks much more professional and will protect the basic foam from any wear from patches on leather suits or abuse from side to side movements. we have seen these seats go on for 3 seasons or more!
• Pro Seat - This seat is for riders or teams that require their seat to provide back support or a step seat to keep them in a position from sliding too far back in the seat under acceleration, this is often done with a raised section so they can still get back in the seat in the full tuck, they are just raised up more which helps keep the butt up and their head shoulders and chest lower in the tuck. It is the same material as the standard seat but can also be customized with team logo's or race number -If you purchase a pro seat we will contact you to design your seat. Please note pro seats are made custom to order
• Upper Race Fairing (6 Dzus)
• Lower Fairing
• Left Side Panel for Big Radiator (3 Dzus)
• Right Side Panel for Big Radiator (3 Dzus)
• Single Race Tail (4 Pcs)
Not included
There are 3 options for seats
• Basic - This seat is a 15mm neoprene foam glued to a base that is molded from the seat pan of the tail section and then attaches to the seat pan with bolts. Please not that these seat's will only fit carbonin seat pans and seat units. It will not work on any other brand. This foam will wear out like any other foam pad.
• Standard - This is an upgrade to the basic seat which is covered in a neoprene material that protects the basic foam and provides the rider a level of grip but without compromising the need to slide side to side. It looks much more professional and will protect the basic foam from any wear from patches on leather suits or abuse from side to side movements. we have seen these seats go on for 3 seasons or more!
• Pro Seat - This seat is for riders or teams that require their seat to provide back support or a step seat to keep them in a position from sliding too far back in the seat under acceleration, this is often done with a raised section so they can still get back in the seat in the full tuck, they are just raised up more which helps keep the butt up and their head shoulders and chest lower in the tuck. It is the same material as the standard seat but can also be customized with team logo's or race number -If you purchase a pro seat we will contact you to design your seat. Please note pro seats are made custom to order
Item #: CY192200
Condition:
New
In Stock inventory ships within 24 hours. Avio Fiber has a typical eta of 4-6 weeks, Carbon Fiber can take up to 8 weeks due to production times. Please note supply-chain related delays are possible.
Price: $2,313.62
Description:
Replacement Lower Fairing with kit stand cut out
Item #: CY19222
Condition:
New
In Stock inventory ships within 24 hours. Avio Fiber has a typical eta of 4-6 weeks, Carbon Fiber can take up to 8 weeks due to production times. Please note supply-chain related delays are possible.
Price: $593.41
S1000RR M1000RR Rear Fender Hugger
Description:
Carbon fiber rear fender oem replacement
Item #: CB4020
Condition:
New
In Stock inventory ships within 24 hours. Avio Fiber has a typical eta of 4-6 weeks, Carbon Fiber can take up to 8 weeks due to production times. Please note supply-chain related delays are possible.
Price: $256.03
Description:
Carbonin Pro Seat Foam 2018-2020 Kawasaki ZX-400 Ninja
*Customize-able Seat, once order is submitted we will reach out for creative design process via email/phone
**Made to fit only Carbonin Bodywork
*Customize-able Seat, once order is submitted we will reach out for creative design process via email/phone
**Made to fit only Carbonin Bodywork
Item #: FM1960K
Condition:
New
In Stock inventory ships within 24 hours. Avio Fiber has a typical eta of 4-6 weeks, Carbon Fiber can take up to 8 weeks due to production times. Please note supply-chain related delays are possible.
Price: $324.45
Description:
R1 seat for Carbonin bodywork
Pictures are shown for reference only and may not accurately represent the exact model of your seat
Pictures are shown for reference only and may not accurately represent the exact model of your seat
Item #: FM1960YS
Condition:
New
In Stock inventory ships within 24 hours. Avio Fiber has a typical eta of 4-6 weeks, Carbon Fiber can take up to 8 weeks due to production times. Please note supply-chain related delays are possible.
Price: $325.37
Description:
Carbonin Shark Fin AKA toe guard Carbon Fiber 17-20 Honda CBR1000RR using a suter swingarm
-Plain weave carbon Fiber construction
May fit other swingarms
-Plain weave carbon Fiber construction
May fit other swingarms
Item #: CH18061
Condition:
New
Limited Supply: Only 1 Left!
In Stock inventory ships within 24 hours. Avio Fiber has a typical eta of 4-6 weeks, Carbon Fiber can take up to 8 weeks due to production times. Please note supply-chain related delays are possible.
Price: $89.25
Sale: $49.00
Save: 45%
Save: $40.25
Description:
Carbonin STD Seat Foam 2018-2020 Kawasaki ZX-400 Ninja
Made to fit only Carbonin Bodywork
Made to fit only Carbonin Bodywork
Item #: FM1950K
Condition:
New
In Stock inventory ships within 24 hours. Avio Fiber has a typical eta of 4-6 weeks, Carbon Fiber can take up to 8 weeks due to production times. Please note supply-chain related delays are possible.
Price: $238.35
Description:
R1 seat for Carbonin bodywork
Pictures are shown for reference only and may not accurately represent the exact model of your seat
Pictures are shown for reference only and may not accurately represent the exact model of your seat
Item #: FM1950YS
Condition:
New
In Stock inventory ships within 24 hours. Avio Fiber has a typical eta of 4-6 weeks, Carbon Fiber can take up to 8 weeks due to production times. Please note supply-chain related delays are possible.
Price: $238.70
Description:
Carbonin 4mm Allen Head 1/4 turn Dzus 10mm - Total length =12mm measured from under the head
Please use the guide below to learn how to measure your dzus
Please use the guide below to learn how to measure your dzus
Item #: D8-316-210-190
Condition:
New
In Stock inventory ships within 24 hours. Avio Fiber has a typical eta of 4-6 weeks, Carbon Fiber can take up to 8 weeks due to production times. Please note supply-chain related delays are possible.
Price: $3.15
Description:
Carbonin 4mm Allen Head 1/4 turn Dzus 12mm - Total Length 15mm measured from under the head
Please use the guide below to learn how to measure your dzus
Please use the guide below to learn how to measure your dzus
Item #: D8-316-212-190
Condition:
New
In Stock inventory ships within 24 hours. Avio Fiber has a typical eta of 4-6 weeks, Carbon Fiber can take up to 8 weeks due to production times. Please note supply-chain related delays are possible.
Price: $3.15
Description:
Carbonin Aluminum Brackets OEM Subframe 2020 K67 BMW S1000RR Required For Mounting the Tail section and tail unit and airbox cover to the bike
Item #: ALU4004B
Condition:
New
In Stock inventory ships within 24 hours. Avio Fiber has a typical eta of 4-6 weeks, Carbon Fiber can take up to 8 weeks due to production times. Please note supply-chain related delays are possible.
Price: $190.69
GSXR 1000
Description:
X2 Dzus and CNC brackets for quick release
Item #: ALU1202S
Condition:
New
Limited Supply: Only 1 Left!
In Stock inventory ships within 24 hours. Avio Fiber has a typical eta of 4-6 weeks, Carbon Fiber can take up to 8 weeks due to production times. Please note supply-chain related delays are possible.
Price: $77.61
Description:
4 quick release spacers for tail unit
Item #: ALU1204SCNC
Condition:
New
Limited Supply: Only 2 Left!
In Stock inventory ships within 24 hours. Avio Fiber has a typical eta of 4-6 weeks, Carbon Fiber can take up to 8 weeks due to production times. Please note supply-chain related delays are possible.
Price: $135.22
Description:
4 Aluminum spacers for tail unit mounting
Item #: ALU1204SR
Condition:
New
Limited Supply: Only 2 Left!
In Stock inventory ships within 24 hours. Avio Fiber has a typical eta of 4-6 weeks, Carbon Fiber can take up to 8 weeks due to production times. Please note supply-chain related delays are possible.
Price: $45.60
Description:
Aluminum bracket to be used with carbon or avio air intake, supports upper fairing and instrument cluster
Item #: ALU16002Y
Condition:
New
Limited Supply: Only 2 Left!
In Stock inventory ships within 24 hours. Avio Fiber has a typical eta of 4-6 weeks, Carbon Fiber can take up to 8 weeks due to production times. Please note supply-chain related delays are possible.
Price: $172.02
Description:
1 piece airbox cover
It comes Ready to install on your Bike with Perfect Fitment
Made from avio fiber with epoxy resin
Reinforced with Carbon fiber
Light Flexible & Durable
Finished in white Gel Coat
Most Commonly used for Race bikes as this removes the need to remove side panels to get to the fuel tank bolts saving valuable time when working on the bike There is a cut out to access the Tank Bolt so it is not necessary to remove the cover
It comes Ready to install on your Bike with Perfect Fitment
Made from avio fiber with epoxy resin
Reinforced with Carbon fiber
Light Flexible & Durable
Finished in white Gel Coat
Most Commonly used for Race bikes as this removes the need to remove side panels to get to the fuel tank bolts saving valuable time when working on the bike There is a cut out to access the Tank Bolt so it is not necessary to remove the cover
Item #: B1425AF
Condition:
New
In Stock inventory ships within 24 hours. Avio Fiber has a typical eta of 4-6 weeks, Carbon Fiber can take up to 8 weeks due to production times. Please note supply-chain related delays are possible.
Price: $257.37
Description:
Carbonin Avio Fiber Air box Cover 2020 K67 BMW S1000RR Will only fit with Carbonin Tail unit and Bracketry please see linked bracketry to work with your subframe
Please note if purchasing the Alpha racing subframes you do not require brackets as those come already on the subframe
Please note if purchasing the Alpha racing subframes you do not require brackets as those come already on the subframe
Item #: B4425AF
Condition:
New
In Stock inventory ships within 24 hours. Avio Fiber has a typical eta of 4-6 weeks, Carbon Fiber can take up to 8 weeks due to production times. Please note supply-chain related delays are possible.
Price: $300.04
Description:
"This is a 1 piece airbox cover that has the side panels built in to Replace the oem Airbox Cover and side panels
It comes Ready to install on your Bike with Perfect Fitment
Made from avio fiber with epoxy resin
Reinforced with Carbon fiber
Light Flexible & Durable
Finished in white Gel Coat
Most Commonly used for Race bikes as this removes the need to remove side panels to get to the fuel tank bolts saving valuable time when working on the bike There is a cut out to access the Tank Bolt so it is not necessary to remove the cover"
It comes Ready to install on your Bike with Perfect Fitment
Made from avio fiber with epoxy resin
Reinforced with Carbon fiber
Light Flexible & Durable
Finished in white Gel Coat
Most Commonly used for Race bikes as this removes the need to remove side panels to get to the fuel tank bolts saving valuable time when working on the bike There is a cut out to access the Tank Bolt so it is not necessary to remove the cover"
Item #: Y12425AF
Condition:
New
In Stock inventory ships within 24 hours. Avio Fiber has a typical eta of 4-6 weeks, Carbon Fiber can take up to 8 weeks due to production times. Please note supply-chain related delays are possible.
Price: $257.37
Description:
"This is a 1 piece airbox cover that has the side panels built in to Replace the oem Airbox Cover and side panels
It comes Ready to install on your Bike with Perfect Fitment
Made from avio fiber with epoxy resin
Reinforced with Carbon fiber
Light Flexible & Durable
Finished in white Gel Coat
Most Commonly used for Race bikes as this removes the need to remove side panels to get to the fuel tank bolts saving valuable time when working on the bike There is a cut out to access the Tank Bolt so it is not necessary to remove the cover"
It comes Ready to install on your Bike with Perfect Fitment
Made from avio fiber with epoxy resin
Reinforced with Carbon fiber
Light Flexible & Durable
Finished in white Gel Coat
Most Commonly used for Race bikes as this removes the need to remove side panels to get to the fuel tank bolts saving valuable time when working on the bike There is a cut out to access the Tank Bolt so it is not necessary to remove the cover"
Item #: Y16425AF
Condition:
New
In Stock inventory ships within 24 hours. Avio Fiber has a typical eta of 4-6 weeks, Carbon Fiber can take up to 8 weeks due to production times. Please note supply-chain related delays are possible.
Price: $246.70
Description:
"This is a 1 piece airbox cover that has the side panels built in to Replace the oem Airbox Cover and side panels
It comes Ready to install on your Bike with Perfect Fitment
Made from avio fiber with epoxy resin
Reinforced with Carbon fiber
Light Flexible & Durable
Finished in white Gel Coat
Most Commonly used for Race bikes as this removes the need to remove side panels to get to the fuel tank bolts saving valuable time when working on the bike There is a cut out to access the Tank Bolt so it is not necessary to remove the cover"
It comes Ready to install on your Bike with Perfect Fitment
Made from avio fiber with epoxy resin
Reinforced with Carbon fiber
Light Flexible & Durable
Finished in white Gel Coat
Most Commonly used for Race bikes as this removes the need to remove side panels to get to the fuel tank bolts saving valuable time when working on the bike There is a cut out to access the Tank Bolt so it is not necessary to remove the cover"
Item #: Y18425AF
Condition:
New
In Stock inventory ships within 24 hours. Avio Fiber has a typical eta of 4-6 weeks, Carbon Fiber can take up to 8 weeks due to production times. Please note supply-chain related delays are possible.
Price: $257.37
Popular Brands:
More About Bodywork
Carbon fiber and Avio fiber race bodywork kits by Carbonin come preinstalled with Dzus fasteners and are the finest kits you can buy for your motorcycle. Our aftermarket motorcycle fairings and bodywork use the very best in materials and scanning technology in their molding process to guarantee the best fit. We also carry Zero Gravity, Puig, and MRA Screens for your street or race bike. If you’re looking for top-of-the-line aftermarket motorcycle bodywork, fairings, and windshields, you’ve come to the right place.