HHR Performance » Brembo

Description:

Monobloc, 108mm Mount Spacing, Front, Left, Nickel

Item Summary
108mm center to center
34/38mm Pistons
Nickel finish
Left side caliper only
About the Product
108mm center to center
34/38mm Pistons
Nickel finish
Left side caliper only
2014 / 2015 Monobloc brake caliper for Moto 2 / Superbike / MotoGP for Racingdiscs (30 mm discs)!
Latest MotoGP - design 2014 / 2015 with lateral fixing for brake hose!

P4 34/38 CNC Radial Monobloc - brake caliper 108 mm
Brembo Racing Pure, (ideal for 30 mm brake ring)

Specifications

Fixing Diameter: 108mm
Position: Front
Caliper Body: Monobloc
Fixing: Radial
Pistons: 4
Piston Diameter: 34-38mm
Disc Height: 30mm
Material: B.AL
Surface Finish: NI
Bridges: 3
Hardware Material: TI
Piston Material: TI
Weight w/o Pads: 615g
Pad Shape: Q
Pads Included: NO
Offset: 22.5mm
Brake Fluid: DOT 4
Brake Pads

Z03 Sintered Endurance: 07A02310 or 07A02320
Z04 Sintered: 07835424

Description:

108mm Mount Spacing, Front, Left, Nickel

Monoblock caliper, strictly racing, machined entirely from billet thanks to the use of numerically controlled equipment. The extremely low weight, just 640 grams without brake pads, and the use of titanium mounting bolting and pistons places this caliper at the absolute top of its class in performance in the Brembo range. The hydraulics were the focus of a careful fine-tuning and, thanks to the use of 4 pistons with 34 and 38 mm differentiated diameter, allow unparalleled braking power to be unleashed.
The Brembo monoblock calipers made from billet are derived from Brembo’s great experience in racing which, crossing over into each phase of the production process, has allowed the mass/stiffness ratio and braking performance to be increased. These calipers contribute to the highest performance possible with a bike caliper and are the result of precise design calculations, as well as the use of the most advanced metal machining technologies available.
This model uses a special surface finish borrowed from MotoGP: The nickel plating allowed the calipers to be taken to new performance levels thanks to further restrictions on the machining tolerances.
For this type of caliper we recommend the use of a “low strip” brake disc. For more information contact your local distributor.
This Component is designed and manufactured to be used exclusively in racing competitions and, therefore, the product shall be installed through specific adaptors not included in the packaging of the component and by highly qualified and competent professionals working in the “racing” field. Please contact our distributor for any further clarification.

Description:

108mm Mount Spacing, Front, Right, Nickel

Monoblock caliper, strictly racing, machined entirely from billet thanks to the use of numerically controlled equipment. The extremely low weight, just 640 grams without brake pads, and the use of titanium mounting bolting and pistons places this caliper at the absolute top of its class in performance in the Brembo range. The hydraulics were the focus of a careful fine-tuning and, thanks to the use of 4 pistons with 34 and 38 mm differentiated diameter, allow unparalleled braking power to be unleashed.
The Brembo monoblock calipers made from billet are derived from Brembo’s great experience in racing which, crossing over into each phase of the production process, has allowed the mass/stiffness ratio and braking performance to be increased. These calipers contribute to the highest performance possible with a bike caliper and are the result of precise design calculations, as well as the use of the most advanced metal machining technologies available.
This model uses a special surface finish borrowed from MotoGP: The nickel plating allowed the calipers to be taken to new performance levels thanks to further restrictions on the machining tolerances.
For this type of caliper we recommend the use of a “low strip” brake disc. For more information contact your local distributor.
This Component is designed and manufactured to be used exclusively in racing competitions and, therefore, the product shall be installed through specific adaptors not included in the packaging of the component and by highly qualified and competent professionals working in the “racing” field. Please contact our distributor for any further clarification.

Description: Item Summary
26mm pistons
Rear Caliper
For Off-Road applications
About the Product
Technical Specifications

Center to Center: 119mm (bracket)
Position: Rear
Caliper Body: Floating
Fixing: Axial + Bracket
Number of Pistons: 1
Piston Size: 26mm
Disc Height: 31mm
Material: Billet Aluminum
Finishing: Hard Anodizing
Hardware: Steel
Pistons: Aluminum
Weight (w/o pads): 595gr
Pad Shape: Z
Pads Included: Yes
Brake Fluid: DOT4
Spare Parts

Banjo Bolt
Bleeding Screw
Rubber Bellow Kit
Spring & Blade Kit
Spindle & Pin Kit
Thermotapes 88-127 degrees
Thermotapes 132-171 degrees
Brake Pads

OE Compound: 07849312 and 07849327

Description:

Piston and Seal Service Kit for M4 Caliper, 220A39710, 220988530, 220988550

Item Summary

Calipers service kit for the M4 calipers
Pistons, seals and dust seals included for servicing one M4 Caliper
Fits Brembo Caliper 20A39710, 20A39720 or a single side of the caliper kit 220A39710

Description: This caliper, made in two pieces by means of casting, concentrates the most advanced casting and machining technologies to obtain an ultra lightweight end product with stiffness and operating precision values capable of providing excellent performance.
The caliper body houses two 34 mm diameter pistons. The caliper has sintered brake pads which represent the best of what is currently available on the market and it bears a laser machined Brembo logo.
The product was created specifically by Brembo to meet the needs of enthusiasts looking for the right balance between excellent performance and a reasonable price.

Description: Caliper in two pieces made entirely from billet. This machining, which uses sophisticated numerically controlled equipment, provides maximum stiffness and lightweight values which are reflected in its excellent performance.
The caliper body houses two 34 mm diameter pistons. Particular attention was dedicated to achieving optimum braking control even in poor grip conditions due to any lightening of the rear wheel during the braking phase. The caliper has sintered brake pads which represent the best of what is currently available on the market.
The caliper is hard oxidised like the ones used on racing bikes, providing further protection. The caliper is marked with the production batch for immediate traceability, as well as the embossed and hand painted Brembo logo.

Description: Caliper in two pieces made entirely from billet. This machining, which uses sophisticated numerically controlled equipment, provides maximum stiffness and lightweight values which are reflected in its excellent performance.
The caliper body houses two 34 mm diameter pistons. Particular attention was dedicated to achieving optimum braking control even in poor grip conditions due to any lightening of the rear wheel during the braking phase. The caliper has sintered brake pads which represent the best of what is currently available on the market.
The caliper is oxidized black and is marked with the production batch for immediate traceability, as well as the embossed and hand painted Brembo logo.

Description:

CNC, 108mm Mount Spacing

The new Brembo “.484” caliper aims to meet the needs of those who want to improve their braking system performance, giving the bike a strong Café Racer connotation.
This new caliper is made entirely from billet, starting with a block of aluminium machined with the most modern Cam technologies available. The two semi-calipers are then joined with three steel screws located within the wheel side. The caliper body houses four 32 mm diameter pistons.
The name “.484” is derived from the displacement of an individual caliper piston measured in cubic inches, typical of the VTwin market. This caliper uses radial mounting technology in order to guarantee maximum operating precision. The brake pads slide in specific guides, machined onto the body of the caliper itself, which allow brake pad pins to be eliminated.
Finishing of the caliper is obtained with an anthracite black hard oxidation treatment, whereas the big Brembo logo, in its characteristic red colour, is placed at the top of the piston on the disc entry side. The pair of calipers comes in a kit that includes: pre-mounted sintered brake pads, specific instruction sheet and a pair of Brembo stickers.

Description:

CNC Caliper, Axial Mount, CNC

Item Summary
Specific billet0machined caliper bracket.
4 piston calipers
2 x 30mm pistons, 2 x 34mm pistons
About the Product
CNC bracket black hard anodized with Brembo Racing laer marked logo.

To be used with original brake disc.

Original brake M/C has to be replaced with Brembo PS16 or radial 19mm.

Technical Specifications

Cente to Center: 100mm (bracket)
Position: Front
Caliper Body: 2-pieces
Fixing: Axial + Bracket
Pistons: 4
Piston Size: 30/34mm
Disc Height: 32-34mm
Material: Billet Aluminum
Finishing: Hard Anodizing
Bridges: 2
Hardware: Steel
Pistons: Aluminum
Weight (w/o pads): 580gr
Pad Shape: D
Pads Included: Yes
Offset: 26.5mm
Brake Fluid: DOT4
Spare Parts

Bleed Screw Cover
Bleeding Screw
Pin
Spindle
Thermotapes 88-127 degrees
Thermotapes 132-171 degrees
Brake Pads

Genuine: 107442650
Z03: 107A48673
Z04 Compound: 107A48653

Description:

100mm Radail Mount Spacing, Monoclock Billet, Front, Nickel

Designed for track enthusiasts and those who seek something truly innovative from the calipers fitted to their bikes, the Brembo GP4-MS is inspired by the monobloc caliper developed for MotoGP - now available to the general public.
Equipped with four 30 mm diameter pistons, the Brembo GP4-MS caliper redefines the rules for road calipers. Its performance comes close to that of the versions used in the most important motorbike competitions in the world, thanks to the combination of all the distinctive features of Brembo calipers used in the MotoGP sector - such as monobloc technology, machining from solid, nickel surface finishing and design with topological optimisation.
The GP4-MS caliper shares the styling of Brembo Racing calipers of the future, with the aim of optimising rigidity and ensuring low weight.
Just like Brembo calipers used in MotoGP and Superbike World Championships, the innovative GP4-MS caliper - for bikes with 100mm centres - is manufactured from aluminium machined from a solid block.
Compared to braking components manufactured by casting, machining from solid allows the use of materials with better mechanical characteristics, greater resistance to high temperatures and, consequently, improvements to the performance of the entire braking system.
Unlike models in the previous GP4 range, the Brembo GP4-MS combines machining from solid with monobloc technology, i.e. the use of a single block of aluminium – offering a new design choice for motorcycle calipers in road applications.
This process was achieved by perfecting the use of topological optimisers, software derived from 40 years of Brembo victories in the premier World Championship class. This computer program has made it possible to optimise the shape of the caliper body. The entire process ensures exceptional rigidity, unprecedented lightness and less deformation at high temperatures.
In common with its competition calipers, the Brembo GP4-MS also has nickel surface finishing. In addition to attractive styling, this process has made it possible to comply with strict manufacturing tolerances, to the benefit of performance and operating precision. By fitting a double seal, one inside the piston and one acting as a dust cover, the Brembo caliper ensures maximum on-road freedom without the need for the regular checks characteristic of racing calipers.
The Brembo GP4-MS caliper kit also includes high performance sintered pads - the top choice for mixed road/track use - plus all the small parts needed for assembly and related instructions. The kit also includes the eye-catching heat-sensitive adhesive stickers used in the MotoGP world to assess the operating temperature reached by the calipers after each session. The Brembo GP4-MS caliper is compatible with the Brembo Racing Z04 pads used in the World Superbike, Supersport and Moto2 Championships.

Description:

108mm Mount Spacing

Item Summary
Caliper kit (left and right calipers)
108mm fixing
About the Product
Specifications

Fixing Dimensions: 108mm
Position: front
Caliper Body: Monobloc
Fixing: Radial
Pistons: 4
Piston Diameter: 30mm
Disc Height: 32-34mm
Material: C.AL
Surface Protection: Ti HA
Bridges: 3
Hardware Material: ST
Piston Material: AL
Weight w/o Pads: 935g
Pad Shap: C
Pads Included: YES
Offset: 22.5mm
Brake Fluid: DOT 4
Spare Parts

Bleed Screw Cover: 05150210
Bleeding Screws: 105338752
Spring: 120225579
Thermotapes 88-127c: 02516811
Thermotapes 132-171c: 02516812
Brake Pads

Genuine: 107988210
Z03: 107A48669
Z04: 107A48639

Description: The body of this caliper is made entirely from billet and consists in two mechanically connected pieces. Particular attention was dedicated to finding high braking power and stiffness values, obtained tanks to painstaking design, the use of carefully selected raw materials and ultra modern metal machining technology discoveries.
The hydraulics were the focus of a careful fine-tuning. The use of four 32 mm diameter pistons allowed a further increase in braking power and modularity.
This model implements a surface finish borrowed from MotoGP. The nickel plating, in addition to giving it a decidedly attractive look, allowed the already strict machining tolerances to be refined, all to the advantage of performance and operating precision.
The brake pads slide in specific guides, machined onto the body of the caliper itself, which allow brake pad pins to be eliminated.
The Brembo logo is embossed and hand painted in classic Brembo Red. The product, provided in a kit, includes sintered brake pads which represent the absolute best quality available on the market today. The kit also contains an instruction manual, a set of Brembo stickers and extremely useful heat adhesives used in racing to control caliper operating temperature, which are indicative of the product’s racing nature.

Description:

Radial Mount, CNC, 130mm Mount Spacing, Nickel

The body of this caliper is made entirely from billet and consists in two mechanically connected pieces. Particular attention was dedicated to finding high braking power and stiffness values, obtained tanks to painstaking design, the use of carefully selected raw materials and ultra modern metal machining technology discoveries.
The hydraulics were the focus of a careful fine-tuning. The use of four 32 mm diameter pistons allowed a further increase in braking power and modularity.
This model implements a surface finish borrowed from MotoGP. The nickel plating, in addition to giving it a decidedly attractive look, allowed the already strict machining tolerances to be refined, all to the advantage of performance and operating precision.
The brake pads slide in specific guides, machined onto the body of the caliper itself, which allow brake pad pins to be eliminated.
The Brembo logo is embossed and hand painted in classic Brembo Red. The product, provided in a kit, includes sintered brake pads which represent the absolute best quality available on the market today. The kit also contains an instruction manual, a set of Brembo stickers and extremely useful heat adhesives used in racing to control caliper operating temperature, which are indicative of the product’s racing nature.

Description:

100mm Mount Spacing, P4 34mm Pistons, Front, Titanium

This monoblock caliper, obtained from a single piece of cast aluminium, is made with the most advanced casting and machining technologies in order to obtain a solid caliper body which is ultra light and has excellent stiffness and precision operating values. The hydraulics were given particular attention, as was the shape of the caliper body, both of which were the focus of technical fine-tuning. The caliper body, which houses four 34 mm diameter pistons, is characterised by significant stiffness values which are obtained thanks to the peculiarity of the triple bridge shape.
With these cast monoblock calipers Brembo makes the technology which has been successfully employed in MotoGP available to all enthusiasts. This is technology which allows the caliper body to be obtained from a single piece of cast aluminium, thereby guaranteeing optimum stiffness.
The surface finish is anodised in titanium colour. The product is provided in a kit made up of two calipers and sintered brake pads which represent the absolute best quality available on the market today.

Description:

Cast, 100mm Mount Spacing

In designing and making this monoblock caliper we decided to give the hydraulics and the caliper body shape particular attention, both of which were the focus of painstaking technical operations to perfect them. With its typically racing design the caliper houses four 30 mm diameter pistons. Thanks to careful refinement, the compact body of the caliper guarantees the excellent characteristics of power and modularity that are so typical of Brembo calipers.
This caliper is the result of sophisticated “topological optimisation” calculation software which, thanks to an iteration process, allows material to be removed from the areas of the caliper where it is not needed in order to come as close as possible to the optimum structure, combining maximum stiffness with maximum lightness.
This caliper was presented for the first time at EICMA 2011 as original equipment on the Ducati 1199 Panigale. In its name, M50, the letter M stands for monoblock, a technology which was successfully introduced by Brembo in MotoGP in 1994, which allows the caliper body to be derived from a single piece of cast aluminium, whereas the number 50 is a tribute to the number of years the company has been in business.
The product, provided in a kit made up of 2 calipers and sintered brake pads which represent the absolute best quality available on the market today.

Description: Set includes left and right calipers

BRAKE PADS ARE INCLUDED

Built from a single billet piece of aluminum and through careful machining, the Brembo GP4-RB brake calipers are a really important upgrade to the production system.

The improvement in terms of performance and safety is guaranteed as well as its characteristics in terms of power, lightness and modularity are guaranteed.

The body is entirely in aluminum alloy with 22.5 mm offset and 108 mm mounting size.

The braking mechanism is entrusted to 4 totally aluminum 30/34 mm pistons.

The aesthetics are no less with the completely black body and the Brembo logo in glossy red.



TECHNICAL FEATURES:

- Wheelbase: 108 mm

- Offset: 22,5 mm

- Piston diameter: 30 mm

- No. of pistons: 4

- Pistons material: Aluminum

- H brake band: 34 mm

- Finish: Black oxidation

Description: Brembo Caliper Set, P4 30/34mm, GP4-RB, 2-Pin, Billet 2-Piece, 100mm Radial Mount, Hard-Anodized Black 220B47330

Item Summary
2 x 30mm & 2 x 34mm aluminum pistons
100mm radial mount
Anti-chatter clip for brake pad
HH sintered brake pads included

Description: Brembo Caliper Set, P4 30mm, StyleMA, Cast Monobloc, 100mm Radial Mount, Front, Black 220D02070

Description: Brembo Caliper Set, P4 30mm, StyleMA, Cast Monobloc, 100mm Radial Mount, Front, Titanium Grey 220D02010

Item Summary
Position: Front
Bolt-Center: 100mm
Caliper Body: Monoblock
Piston DIA: 30mm
Piston Quantity: 4
Piston Material: Aluminum
Caliper Material: Cast Aluminum
Brake Pads: Included (HH Rated Sintered)

Description: BremboCaliper, Left, P4 30/34mm A, P4-40RR w/ Organic Pads Shape D, Billet 2-Piece, 40mm Axial Mount, Front, Black Anodized with Red Lettering 20475657

Description: Brembo Caliper, Left, P4 30/34mm C, w/ Organic Pads Shape D, Cast 2-Piece, 40mm Axial Mount, Front, Black Anodizing w/ Painted Red Logo, Italian Flag 20516538

Description: Brembo Caliper, Left, P4 30/34mm C, w/ Organic Pads Shape D, Cast 2-Piece, 40mm Axial Mount, Front, Gold w/ Painted Red Logo 20516574

Description: Brembo Caliper, Left, P4 30/34mm C, w/ Organic Pads Shape D, Cast 2-Piece, 40mm Axial Mount, Front, Titanium Grey w/ Painted Red Logo 20516579

Description: Brembo Caliper, Left, P4 30/34mm, GP4-RB 2-Pin, Billet 2-Piece, 108mm Radial Mount, Hard-Anodized Black 120B47340

Description: Brembo Caliper, Left, P4 30/34mm, GP4-RB, 2-Pin, Billet 2-Piece, 100mm Radial Mount, Hard-Anodized Black 120B47330

Description: Brembo Caliper, Left, P4 30mm, GP4-rs, Cast Monobloc, 108mm Radial Mount, Titanium Gray 120C78310

Description: Brembo Caliper, Left, P4 30mm, M50, Cast Monobloc, 100mm Radial Mount, Blue w/ Red Lettering 120A88579

In designing and making this monoblock caliper we decided to give the hydraulics and the caliper body shape particular attention, both of which were the focus of painstaking technical operations to perfect them. With its typically racing design the caliper houses four 30 mm diameter pistons. Thanks to careful refinement, the compact body of the caliper guarantees the excellent characteristics of power and modularity that are so typical of Brembo calipers.
This caliper is the result of sophisticated “topological optimisation” calculation software which, thanks to an iteration process, allows material to be removed from the areas of the caliper where it is not needed in order to come as close as possible to the optimum structure, combining maximum stiffness with maximum lightness.
This caliper was presented for the first time at EICMA 2011 as original equipment on the Ducati 1199 Panigale. In its name, M50, the letter M stands for monoblock, a technology which was successfully introduced by Brembo in MotoGP in 1994, which allows the caliper body to be derived from a single piece of cast aluminium, whereas the number 50 is a tribute to the number of years the company has been in business.

Description: Brembo Caliper, Left, P4 30mm, StyleMA, Cast Monobloc, 100mm Radial Mount, Front, Black 120D02070

Description: Brembo Caliper, Left, P4 30mm, StyleMA, Cast Monobloc, 100mm Radial Mount, Front, Titanium Grey 120D02010

Description: Brembo Caliper, Left, P4 32mm, .484 Cafe, Billet 2-Piece, 108mm Radial Mount, Black 120B47320


Item Summary
108mm mount spacing
Billet 2-piece design
Black anodized caliper with Red painted Brembo logo
Sintered brake pads included
Listing is for Left caliper only!

Description: Brembo Caliper, Left, P4 32mm, GP4-rx, Billet 2-Piece, 100mm Radial Mount, Front, Nickel 120B01020

Description: Brembo Caliper, Left, P4 34mm, 4 Pad, w/ TT 2172 Sintered Pads, Shape A, Cast 2-Piece, 100mm Radial Mount, Front, Silver w/ Red Logo 20834338

Description: Brembo Caliper, P2 30mm, 16.5mm offset, Machined for Radiator Kit, without Pads, Shape W/Y, Billet 2-Piece, 64mm Axial Mount, Rear, Hard Anodized XB4S520

Description: Brembo Caliper, P2 32G w/ Organic Pads Shape S, Cast 2-Piece, 84mm Axial Mount, Right, Rear, Black 20B85156

Description: Brembo Caliper, P2 32G w/ Organic Pads Shape S, Cast 2-Piece, 84mm Axial Mount, Right, Rear, Gold

Description: Brembo Caliper, P2 32mm F, w/ 7.8mm Organic Brake Pads, Interchangeable Opposing Bleeder, 84mm Axial Mount, Rear, Black 20475657

Description: Brembo Caliper, P2 34G, 7.4mm Organic, Left Side Bleeder, Cast 2-Piece, 84mm Axial Mount, Rear, Black w/ Painted Red Logo 20B85257

Description: Brembo Caliper, P2 34G, 7.4mm Organic, Left Side Bleeder, Cast 2-Piece, 84mm Axial Mount, Rear, Titanium w/ Painted Red Logo 20B85278

Description: Brembo Caliper, P2 34G, 7.4mm Organic, Right Side Bleeder, Cast 2-Piece, 84mm Axial Mount, Rear, Titanium w/ Painted Red Logo 20B85288