HHR Performance - Bodywork
HHR Performance only carries aftermarket motorcycle bodywork, fairings, and windshields that are of the highest quality. We carry options such as Carbonin carbon fiber and Avio fiber race bodywork, as well as MRA race screens which are utilized by some of the world’s top-performing race teams. Shop our selection of aftermarket motorcycle fairings and bodywork below.
Browse Bodywork Products
R6 Carbon fiber bodywork
Description:
Parts Included in Complete Kit
• upper race fairing (6 Dzus)
• lower fairing
• left side panel 2Dzus
• right side panel 3 Dzus
• single Tail unit (4pcs) Superbike style, OEM seat can not be used
Required Parts
• Stainless steel Seat Unit bracket with dzus *Required to install tail section IN1801Y
• Stainless steel Lower left bracket with dzus (only required if stock bracket is not present) IN1802Y
Not Included
• Fenders
• Airbox Cover
• Seat Unit
• upper race fairing (6 Dzus)
• lower fairing
• left side panel 2Dzus
• right side panel 3 Dzus
• single Tail unit (4pcs) Superbike style, OEM seat can not be used
Required Parts
• Stainless steel Seat Unit bracket with dzus *Required to install tail section IN1801Y
• Stainless steel Lower left bracket with dzus (only required if stock bracket is not present) IN1802Y
Not Included
• Fenders
• Airbox Cover
• Seat Unit
Item #: CY18200
Condition:
New
In Stock inventory ships within 24 hours. Avio Fiber has a typical eta of 4-6 weeks, Carbon Fiber can take up to 8 weeks due to production times. Please note supply-chain related delays are possible.
Price: $2,260.28
R1,R1M bodywork,fairings,carbonin,carbon fiber
Description:
Parts Included In Complete Race Fairing:
• Upper Race Fairing (6 Dzus)
• Lower Fairing
• Left Side Panel (3 Dzus)
• Right Side Panel (3 Dzus)
• Single Race Tail (4 Pcs)
Not included but required:
IN1901Y Seat Bracket
*Cannot fit OEM Seat
• Upper Race Fairing (6 Dzus)
• Lower Fairing
• Left Side Panel (3 Dzus)
• Right Side Panel (3 Dzus)
• Single Race Tail (4 Pcs)
Not included but required:
IN1901Y Seat Bracket
*Cannot fit OEM Seat
Item #: CY19200
Condition:
New
In Stock inventory ships within 24 hours. Avio Fiber has a typical eta of 4-6 weeks, Carbon Fiber can take up to 8 weeks due to production times. Please note supply-chain related delays are possible.
Price: $2,313.62
ZX10R, carbonin, fairing, Bodywork
Description:
Kit consists of:
Upper (4 Dzus)
Lower
Left side panel (7 Dzus)
Cover left side Panel
Right side panel (7 Dzus)
Cover right side panel
Single race tail unit
Seat Unit Battery Tray
Seat Support
Right and Left wings
*Cannot fit OEM Seat
Kickstand can be used (trackday bonus)
No Options for Headlight or tail light cutouts
Upper (4 Dzus)
Lower
Left side panel (7 Dzus)
Cover left side Panel
Right side panel (7 Dzus)
Cover right side panel
Single race tail unit
Seat Unit Battery Tray
Seat Support
Right and Left wings
*Cannot fit OEM Seat
Kickstand can be used (trackday bonus)
No Options for Headlight or tail light cutouts
Item #: CK22200
Condition:
New
In Stock inventory ships within 24 hours. Avio Fiber has a typical eta of 4-6 weeks, Carbon Fiber can take up to 8 weeks due to production times. Please note supply-chain related delays are possible.
Price: $3,181.10
GSXR1000,carbon fiber, bodywork,carbonin,fairing
Description:
Parts Included In Complete Race Fairing:
• Upper Race Fairing (6 Dzus)
• Lower Fairing (5 Dzus)
• Left Side Panel
• Right Side Panel
• Single Race Seat With Fuel Tank Panels (4 Pcs; 1 Dzus)
The 2017-2021 GSXR1000 Bodywork requires the following bracketry for fitment:
Aluminum CNC Inserts Side Panels (ALU1202S)
Inox Holders for Lower Fairing (IN1202S)
The The 2017-2021 GSXR1000 Bodywork also will require 1 of the 2 following tail unit inserts:
Aluminum CNC Tail Inserts Quick Release (Quick Release Bracket w/ DZUS) (ALU1204SCNC)
Aluminum CNC Tail Inserts Bolt On (Hard Mount w/ Bolt) (ALU1204SR)
There are 3 seat options available.
Basic - This seat is a 15mm neoprene foam glued to a base that is molded from the seat pan of the tail section and then attaches to the seat pan with bolts. Please not that these seat's will only fit Carbonin seat pans and seat units. It will not work on any other brand. This foam will wear out like any other foam pad.
Standard - This is an upgrade to the basic seat which is covered in a neoprene material that protects the basic foam and provides the rider a level of grip but without compromising the need to slide side to side. It looks much more professional and will protect the basic foam from any wear from patches on leather suits or abuse from side to side movements. we have seen these seats go on for 3 seasons or more!
Pro Seat - This seat is for riders or teams that require their seat to provide back support or a step seat to keep them in a position from sliding too far back in the seat under acceleration, this is often done with a raised section so they can still get back in the seat in the full tuck, they are just raised up more which helps keep the butt up and their head shoulders and chest lower in the tuck. It is the same material as the standard seat but can also be customized with team logo's or race number -If you purchase a pro seat we will contact you to design your seat. Please note pro seats are made custom to order
Carbonin Tail unit will not work with OEM Seat.
• Upper Race Fairing (6 Dzus)
• Lower Fairing (5 Dzus)
• Left Side Panel
• Right Side Panel
• Single Race Seat With Fuel Tank Panels (4 Pcs; 1 Dzus)
The 2017-2021 GSXR1000 Bodywork requires the following bracketry for fitment:
Aluminum CNC Inserts Side Panels (ALU1202S)
Inox Holders for Lower Fairing (IN1202S)
The The 2017-2021 GSXR1000 Bodywork also will require 1 of the 2 following tail unit inserts:
Aluminum CNC Tail Inserts Quick Release (Quick Release Bracket w/ DZUS) (ALU1204SCNC)
Aluminum CNC Tail Inserts Bolt On (Hard Mount w/ Bolt) (ALU1204SR)
There are 3 seat options available.
Basic - This seat is a 15mm neoprene foam glued to a base that is molded from the seat pan of the tail section and then attaches to the seat pan with bolts. Please not that these seat's will only fit Carbonin seat pans and seat units. It will not work on any other brand. This foam will wear out like any other foam pad.
Standard - This is an upgrade to the basic seat which is covered in a neoprene material that protects the basic foam and provides the rider a level of grip but without compromising the need to slide side to side. It looks much more professional and will protect the basic foam from any wear from patches on leather suits or abuse from side to side movements. we have seen these seats go on for 3 seasons or more!
Pro Seat - This seat is for riders or teams that require their seat to provide back support or a step seat to keep them in a position from sliding too far back in the seat under acceleration, this is often done with a raised section so they can still get back in the seat in the full tuck, they are just raised up more which helps keep the butt up and their head shoulders and chest lower in the tuck. It is the same material as the standard seat but can also be customized with team logo's or race number -If you purchase a pro seat we will contact you to design your seat. Please note pro seats are made custom to order
Carbonin Tail unit will not work with OEM Seat.
Item #: CS12100
Condition:
New
In Stock inventory ships within 24 hours. Avio Fiber has a typical eta of 4-6 weeks, Carbon Fiber can take up to 8 weeks due to production times. Please note supply-chain related delays are possible.
Price: $2,226.95
Description:
This fairing is for the Trackday enthusiast that is still requiring the use of headlights and a sidestand for street riding.
We now sell a kit to include the upper fairing lower fairing and side panels with all of the necessary bracketry for you to purchase to be able to turn your road bike into a track weapon and still be street legal!
This lets you retain your oem seat, tail and airbox cover.
Parts Included with Carbon Fiber Kit:
-Upper race faring With Headlights Cut Out including Brackets for Carbonin fairing bracket for headlight mounting and installed quick release fasteners (DZUS)
-Lower fairing with side stand cut out for use with your kickstand
-Left side panel
-Right side panel
-CNC brackets
-Dzus fasteners
Please Note OEM air intake will need to be modified to fit with this bodywork. It is recommended to use the racing fairing bracket and air intake tube However you can trim your oem air intake tube to remove the inner trim plastic from the oem fairing
We now sell a kit to include the upper fairing lower fairing and side panels with all of the necessary bracketry for you to purchase to be able to turn your road bike into a track weapon and still be street legal!
This lets you retain your oem seat, tail and airbox cover.
Parts Included with Carbon Fiber Kit:
-Upper race faring With Headlights Cut Out including Brackets for Carbonin fairing bracket for headlight mounting and installed quick release fasteners (DZUS)
-Lower fairing with side stand cut out for use with your kickstand
-Left side panel
-Right side panel
-CNC brackets
-Dzus fasteners
Please Note OEM air intake will need to be modified to fit with this bodywork. It is recommended to use the racing fairing bracket and air intake tube However you can trim your oem air intake tube to remove the inner trim plastic from the oem fairing
Item #: CB42100-CUTF
Condition:
New
In Stock inventory ships within 24 hours. Avio Fiber has a typical eta of 4-6 weeks, Carbon Fiber can take up to 8 weeks due to production times. Please note supply-chain related delays are possible.
Price: $2,184.76
Description:
Parts Included In Complete Race Fairing:
• Upper Race Fairing (8 Dzus)
• Lower Fairing
• Left Side Panel (3 Dzus)
• Right Side Panel (3 Dzus)
• Single Race Tail (2 Pcs)
There are 3 options for seats (not included in kit)
Basic - This seat is a 15mm neoprene foam glued to a base that is molded from the seat pan of the tail section and then attaches to the seat pan with bolts. Please not that these seat's will only fit carbonin seat pans and seat units. It will not work on any other brand. This foam will wear out like any other foam pad.
Standard - This is an upgrade to the basic seat which is covered in a neoprene material that protects the basic foam and provides the rider a level of grip but without compromising the need to slide side to side. It looks much more professional and will protect the basic foam from any wear from patches on leather suits or abuse from side to side movements. we have seen these seats go on for 3 seasons or more!
Pro Seat - This seat is for riders or teams that require their seat to provide back support or a step seat to keep them in a position from sliding too far back in the seat under acceleration, this is often done with a raised section so they can still get back in the seat in the full tuck, they are just raised up more which helps keep the butt up and their head shoulders and chest lower in the tuck. It is the same material as the standard seat but can also be customized with team logo's or race number -If you purchase a pro seat we will contact you to design your seat. Please note pro seats are made custom to order
• Upper Race Fairing (8 Dzus)
• Lower Fairing
• Left Side Panel (3 Dzus)
• Right Side Panel (3 Dzus)
• Single Race Tail (2 Pcs)
There are 3 options for seats (not included in kit)
Basic - This seat is a 15mm neoprene foam glued to a base that is molded from the seat pan of the tail section and then attaches to the seat pan with bolts. Please not that these seat's will only fit carbonin seat pans and seat units. It will not work on any other brand. This foam will wear out like any other foam pad.
Standard - This is an upgrade to the basic seat which is covered in a neoprene material that protects the basic foam and provides the rider a level of grip but without compromising the need to slide side to side. It looks much more professional and will protect the basic foam from any wear from patches on leather suits or abuse from side to side movements. we have seen these seats go on for 3 seasons or more!
Pro Seat - This seat is for riders or teams that require their seat to provide back support or a step seat to keep them in a position from sliding too far back in the seat under acceleration, this is often done with a raised section so they can still get back in the seat in the full tuck, they are just raised up more which helps keep the butt up and their head shoulders and chest lower in the tuck. It is the same material as the standard seat but can also be customized with team logo's or race number -If you purchase a pro seat we will contact you to design your seat. Please note pro seats are made custom to order
Item #: CK18100
Condition:
New
In Stock inventory ships within 24 hours. Avio Fiber has a typical eta of 4-6 weeks, Carbon Fiber can take up to 8 weeks due to production times. Please note supply-chain related delays are possible.
Price: $2,242.95
S1000RR M1000RR Carbonin bodywork
Description:
Parts Included with Kit
upper race faring (6 Dzus)
lower fairing (4 Dzus)
left side panel right side panel
single race seat/Tail unit(2 pcs)
Airbox Cover With side panels Required to install- Bracket kit for Installation (must be purchased separately) IN403B
There are 2 types of Rear Bracket kits- oem and SBK subframe
There are 3 options for seats
Please Note OEM air intake will need to be modified to fit race bodywork. It is recommended to use the racing fairing bracket and air intake tube
upper race faring (6 Dzus)
lower fairing (4 Dzus)
left side panel right side panel
single race seat/Tail unit(2 pcs)
Airbox Cover With side panels Required to install- Bracket kit for Installation (must be purchased separately) IN403B
There are 2 types of Rear Bracket kits- oem and SBK subframe
There are 3 options for seats
Please Note OEM air intake will need to be modified to fit race bodywork. It is recommended to use the racing fairing bracket and air intake tube
Item #: B42100AF
Condition:
New
In Stock inventory ships within 24 hours. Avio Fiber has a typical eta of 4-6 weeks, Carbon Fiber can take up to 8 weeks due to production times. Please note supply-chain related delays are possible.
Price: $1,506.86
R1 tank cover
Description:
Carbonin Carbon Fiber Fuel Tank Extension 2015-2020 Yamaha R1 / R1M
*Carbon Weave will match all other Carbonin products carbon including the Carbonin Airbox Cover W/ Side Panels.
*Made to fit over OEM Tank and perefect fitment with Carbonin Airbox cover
*Created for better braking ergonomics and mid turn handling.
*Keeps you from Sliding forward and also give something for your leg to hold onto in mid corner.
*New design with thicker carbon weave that is lighter and stronger.
*7oz Total weight
*3M Vinyl Tape Included for Installation
*Carbon Weave will match all other Carbonin products carbon including the Carbonin Airbox Cover W/ Side Panels.
*Made to fit over OEM Tank and perefect fitment with Carbonin Airbox cover
*Created for better braking ergonomics and mid turn handling.
*Keeps you from Sliding forward and also give something for your leg to hold onto in mid corner.
*New design with thicker carbon weave that is lighter and stronger.
*7oz Total weight
*3M Vinyl Tape Included for Installation
Item #: CY16405
Condition:
New
Limited Supply: Only 1 Left!
In Stock inventory ships within 24 hours. Avio Fiber has a typical eta of 4-6 weeks, Carbon Fiber can take up to 8 weeks due to production times. Please note supply-chain related delays are possible.
Price: $393.74
R1,R1M,carbonin,carbon fiber,bodywork,fairing
Description:
Parts Included with Kit
• upper race faring (4 Dzus)
• lower fairing
• left side panel with optional ecu or rectifier housing. ecu for oem placement or Race for the YEC harness which houses the regulator rectifier
• right side panel
• single race seat (3 pcs) Standard seat can be used but you need to modify the battery retention plate
Not included
There are 3 options for seats
• Basic - This seat is a 15mm neoprene foam glued to a base that is molded from the seat pan of the tail section and then attaches to the seat pan with bolts. Please not that these seat's will only fit carbonin seat pans and seat units. It will not work on any other brand. This foam will wear out like any other foam pad.
• Standard - This is an upgrade to the basic seat which is covered in a neoprene material that protects the basic foam and provides the rider a level of grip but without compromising the need to slide side to side. It looks much more professional and will protect the basic foam from any wear from patches on leather suits or abuse from side to side movements. we have seen these seats go on for 3 seasons or more!
• Pro Seat - This seat is for riders or teams that require their seat to provide back support or a step seat to keep them in a position from sliding too far back in the seat under acceleration, this is often done with a raised section so they can still get back in the seat in the full tuck, they are just raised up more which helps keep the butt up and their head shoulders and chest lower in the tuck. It is the same material as the standard seat but can also be customized with team logo's or race number -If you purchase a pro seat we will contact you to design your seat. Please note pro seats are made custom to order
Tail Light Cut Out Option - with Moto America rules requiring a rain light there is an option for the oem tail light to be used. the light hole will be cut out and the light will attach like oem fitting. There are no Provisions for headlights to work with this kit- this would require custom modification.
• upper race faring (4 Dzus)
• lower fairing
• left side panel with optional ecu or rectifier housing. ecu for oem placement or Race for the YEC harness which houses the regulator rectifier
• right side panel
• single race seat (3 pcs) Standard seat can be used but you need to modify the battery retention plate
Not included
There are 3 options for seats
• Basic - This seat is a 15mm neoprene foam glued to a base that is molded from the seat pan of the tail section and then attaches to the seat pan with bolts. Please not that these seat's will only fit carbonin seat pans and seat units. It will not work on any other brand. This foam will wear out like any other foam pad.
• Standard - This is an upgrade to the basic seat which is covered in a neoprene material that protects the basic foam and provides the rider a level of grip but without compromising the need to slide side to side. It looks much more professional and will protect the basic foam from any wear from patches on leather suits or abuse from side to side movements. we have seen these seats go on for 3 seasons or more!
• Pro Seat - This seat is for riders or teams that require their seat to provide back support or a step seat to keep them in a position from sliding too far back in the seat under acceleration, this is often done with a raised section so they can still get back in the seat in the full tuck, they are just raised up more which helps keep the butt up and their head shoulders and chest lower in the tuck. It is the same material as the standard seat but can also be customized with team logo's or race number -If you purchase a pro seat we will contact you to design your seat. Please note pro seats are made custom to order
Tail Light Cut Out Option - with Moto America rules requiring a rain light there is an option for the oem tail light to be used. the light hole will be cut out and the light will attach like oem fitting. There are no Provisions for headlights to work with this kit- this would require custom modification.
Item #: CY16200
Condition:
New
In Stock inventory ships within 24 hours. Avio Fiber has a typical eta of 4-6 weeks, Carbon Fiber can take up to 8 weeks due to production times. Please note supply-chain related delays are possible.
Price: $2,252.28
Description:
Carbonin Carbon Fiber Fuel Tank Extension 2017-2020 Yamaha YZF-R6
*Carbon Weave will match all other Carbonin products carbon including the Carbonin Airbox Cover W/ Side Panels.
*Made to fit over OEM Tank and perefect fitment with Carbonin Airbox cover
*Created for better braking ergonomics and mid turn handling.
*Keeps you from Sliding forward and also give something for your leg to hold onto in mid corner.
*New design with thicker carbon weave that is lighter and stronger.
*7oz Total weight
*3M Vinyl Tape Included for Installation
*Carbon Weave will match all other Carbonin products carbon including the Carbonin Airbox Cover W/ Side Panels.
*Made to fit over OEM Tank and perefect fitment with Carbonin Airbox cover
*Created for better braking ergonomics and mid turn handling.
*Keeps you from Sliding forward and also give something for your leg to hold onto in mid corner.
*New design with thicker carbon weave that is lighter and stronger.
*7oz Total weight
*3M Vinyl Tape Included for Installation
Item #: CY18405
Condition:
New
In Stock inventory ships within 24 hours. Avio Fiber has a typical eta of 4-6 weeks, Carbon Fiber can take up to 8 weeks due to production times. Please note supply-chain related delays are possible.
Price: $393.74
Description:
Carbonin Carbon Fibre Fuel Tank Extension 2017-2020 Suzuki GSXR 1000
*Picture shown for reference, not actual photo
*Carbon Weave will match all other Carbonin products carbon including the Carbonin Airbox Cover W/ Side Panels.
*Made to fit over OEM Tank and perefect fitment with Carbonin Airbox cover
*Created for better braking ergonomics and mid turn handling.
*Keeps you from Sliding forward and also give something for your leg to hold onto in mid corner.
*New design with thicker carbon weave that is lighter and stronger.
*7oz Total weight
*3M Vinyl Tape Included for Installation
*Picture shown for reference, not actual photo
*Carbon Weave will match all other Carbonin products carbon including the Carbonin Airbox Cover W/ Side Panels.
*Made to fit over OEM Tank and perefect fitment with Carbonin Airbox cover
*Created for better braking ergonomics and mid turn handling.
*Keeps you from Sliding forward and also give something for your leg to hold onto in mid corner.
*New design with thicker carbon weave that is lighter and stronger.
*7oz Total weight
*3M Vinyl Tape Included for Installation
Item #: CS12405
Condition:
New
Limited Supply: Only 3 Left!
In Stock inventory ships within 24 hours. Avio Fiber has a typical eta of 4-6 weeks, Carbon Fiber can take up to 8 weeks due to production times. Please note supply-chain related delays are possible.
Price: $393.74
Description:
Carbonin Carbon Fiber Fuel Tank Extension 2021 Honda CBR1000RR-R CH20405
-Attaches with 3M double sided tape
-Better Ergonomics for mid-turn handling and under hard braking
-Protects gas tank and also covers existing damage.
-Attaches with 3M double sided tape
-Better Ergonomics for mid-turn handling and under hard braking
-Protects gas tank and also covers existing damage.
Item #: CH20405
Condition:
New
Limited Supply: Only 3 Left!
In Stock inventory ships within 24 hours. Avio Fiber has a typical eta of 4-6 weeks, Carbon Fiber can take up to 8 weeks due to production times. Please note supply-chain related delays are possible.
Price: $393.74
CBR1000RR-R
Description:
Carbonin Carbon Fiber Race Bodywork (11 pcs w/ 12 Dzus) 2021 Honda CBR1000RR-R
-Will not fit other brands of bodywork
-Created with BSB Team Honda Racing UK
-Dzus are pre-installed, riveted
-Fairings are pre-fitted
Race Bodywork includes:
Upper Race Fairing (4 dzus)
Lower Fairing (4 dzus)
Left Side Panel (2 dzus)
Left Side Panel Wing Cover
Left Side Panel Inner Wing
Right Side Panel (2 dzus)
Right Side Panel Wing Cover
Right Side Panel inner Wing
Tail Unit (2 pcs)
Airbox Cover w/ Side Panels
Brackets Required, but not included with bodywork:
Aluminum Inserts for Tail Unit (4 pcs) ALU2002H
Inox Bracket for Lower Fairing (1 pc) IN2002H
Inox Brackets for Airbox Cover w/ Side Panels (2 pcs) IN2001H
Front fender is optional and not included with Race bodywork.
Seat Foams are optional and not included with Race Bodywork.
-Will not fit other brands of bodywork
-Created with BSB Team Honda Racing UK
-Dzus are pre-installed, riveted
-Fairings are pre-fitted
Race Bodywork includes:
Upper Race Fairing (4 dzus)
Lower Fairing (4 dzus)
Left Side Panel (2 dzus)
Left Side Panel Wing Cover
Left Side Panel Inner Wing
Right Side Panel (2 dzus)
Right Side Panel Wing Cover
Right Side Panel inner Wing
Tail Unit (2 pcs)
Airbox Cover w/ Side Panels
Brackets Required, but not included with bodywork:
Aluminum Inserts for Tail Unit (4 pcs) ALU2002H
Inox Bracket for Lower Fairing (1 pc) IN2002H
Inox Brackets for Airbox Cover w/ Side Panels (2 pcs) IN2001H
Front fender is optional and not included with Race bodywork.
Seat Foams are optional and not included with Race Bodywork.
Item #: CH20200
Condition:
New
In Stock inventory ships within 24 hours. Avio Fiber has a typical eta of 4-6 weeks, Carbon Fiber can take up to 8 weeks due to production times. Please note supply-chain related delays are possible.
Price: $3,469.77
ZX10R fuel tank cover
Description:
Carbonin Carbon Fiber Fuel Tank Extension 2011-2020 Kawasaki ZX10R
*Carbon Weave will match all other Carbonin products carbon including the Carbonin Airbox Cover W/ Side Panels.
*Made to fit over OEM Tank and perefect fitment with Carbonin Airbox cover
*Created for better braking ergonomics and mid turn handling.
*Keeps you from Sliding forward and also give something for your leg to hold onto in mid corner.
*New design with thicker carbon weave that is lighter and stronger.
*7oz Total weight
*3M Vinyl Tape Included for Installation
*Carbon Weave will match all other Carbonin products carbon including the Carbonin Airbox Cover W/ Side Panels.
*Made to fit over OEM Tank and perefect fitment with Carbonin Airbox cover
*Created for better braking ergonomics and mid turn handling.
*Keeps you from Sliding forward and also give something for your leg to hold onto in mid corner.
*New design with thicker carbon weave that is lighter and stronger.
*7oz Total weight
*3M Vinyl Tape Included for Installation
Item #: CK18405
Condition:
New
Limited Supply: Only 1 Left!
In Stock inventory ships within 24 hours. Avio Fiber has a typical eta of 4-6 weeks, Carbon Fiber can take up to 8 weeks due to production times. Please note supply-chain related delays are possible.
Price: $393.74
K67, M66, S1000RR, Bodywork,Carbonin
Description:
This fairing is for the Trackday enthusiast that is still requiring the use of headlights and a sidestand for street riding.
We now sell a kit to include the upper fairing lower fairing and side panels with all of the necessary bracketry for you to purchase to be able to turn your road bike into a track weapon and still be street legal!
This lets you retain your oem seat, tail and airbox cover.
Parts Included with Avio Fiber Kit:
-Upper race faring With Headlights Cut Out including Brackets for Carbonin fairing bracket for headlight mounting and installed quick release fasteners (DZUS)
-Lower fairing with side stand cut out for use with your kickstand
-Left side panel
-Right side panel
-CNC brackets
-Dzus fasteners
Please Note OEM air intake will need to be modified to fit race bodywork. It is recommended to use the racing fairing bracket and air intake tube However you can trim your oem air intake tube to remove the inner trim plastic from the oem fairing
We now sell a kit to include the upper fairing lower fairing and side panels with all of the necessary bracketry for you to purchase to be able to turn your road bike into a track weapon and still be street legal!
This lets you retain your oem seat, tail and airbox cover.
Parts Included with Avio Fiber Kit:
-Upper race faring With Headlights Cut Out including Brackets for Carbonin fairing bracket for headlight mounting and installed quick release fasteners (DZUS)
-Lower fairing with side stand cut out for use with your kickstand
-Left side panel
-Right side panel
-CNC brackets
-Dzus fasteners
Please Note OEM air intake will need to be modified to fit race bodywork. It is recommended to use the racing fairing bracket and air intake tube However you can trim your oem air intake tube to remove the inner trim plastic from the oem fairing
Item #: B42100AF-CUTF
Condition:
New
In Stock inventory ships within 24 hours. Avio Fiber has a typical eta of 4-6 weeks, Carbon Fiber can take up to 8 weeks due to production times. Please note supply-chain related delays are possible.
Price: $1,361.27
Description:
Upper Race Fairing (6 Dzus)
Lower Fairing (for oversized Radiator, Does fit OEM)
Left Side Panel (for oversized Radiator, Does fit OEM)
Right Side Panel (for oversized Radiator, Does fit OEM)
Single Race Seat (3 Pcs)
Please Note that this Kit has been designed to be used witha bracket kit so the fairing can be mounted to the bike with Dzus fasteners.
Cnc billet option
Optional
There are 3 options for seats
Basic - This seat is a 15mm neoprene foam glued to a base that is molded from the seat pan of the tail section and then attaches to the seat pan with bolts. Please not that these seat's will only fit carbonin seat pans and seat units. It will not work on any other brand. This foam will wear out like any other foam pad.
Standard - This is an upgrade to the basic seat which is covered in a neoprene material that protects the basic foam and provides the rider a level of grip but without compromising the need to slide side to side. It looks much more professional and will protect the basic foam from any wear from patches on leather suits or abuse from side to side movements. we have seen these seats go on for 3 seasons or more!
Pro Seat - This seat is for riders or teams that require their seat to provide back support or a step seat to keep them in a position from sliding too far back in the seat under acceleration, this is often done with a raised section so they can still get back in the seat in the full tuck, they are just raised up more which helps keep the butt up and their head shoulders and chest lower in the tuck. It is the same material as the standard seat but can also be customized with team logo's or race number -If you purchase a pro seat we will contact you to design your seat. Please note pro seats are made custom to order
Tail Light Cut Out Option - with Moto America rules requiring a rain light there is an option for the oem tail light to be used. the light hole will be cut out and the light will attach like oem fitting. There are no Provisions for headlights to work with this kit- this would require custom modification
Lower Fairing (for oversized Radiator, Does fit OEM)
Left Side Panel (for oversized Radiator, Does fit OEM)
Right Side Panel (for oversized Radiator, Does fit OEM)
Single Race Seat (3 Pcs)
Please Note that this Kit has been designed to be used witha bracket kit so the fairing can be mounted to the bike with Dzus fasteners.
Cnc billet option
Optional
There are 3 options for seats
Basic - This seat is a 15mm neoprene foam glued to a base that is molded from the seat pan of the tail section and then attaches to the seat pan with bolts. Please not that these seat's will only fit carbonin seat pans and seat units. It will not work on any other brand. This foam will wear out like any other foam pad.
Standard - This is an upgrade to the basic seat which is covered in a neoprene material that protects the basic foam and provides the rider a level of grip but without compromising the need to slide side to side. It looks much more professional and will protect the basic foam from any wear from patches on leather suits or abuse from side to side movements. we have seen these seats go on for 3 seasons or more!
Pro Seat - This seat is for riders or teams that require their seat to provide back support or a step seat to keep them in a position from sliding too far back in the seat under acceleration, this is often done with a raised section so they can still get back in the seat in the full tuck, they are just raised up more which helps keep the butt up and their head shoulders and chest lower in the tuck. It is the same material as the standard seat but can also be customized with team logo's or race number -If you purchase a pro seat we will contact you to design your seat. Please note pro seats are made custom to order
Tail Light Cut Out Option - with Moto America rules requiring a rain light there is an option for the oem tail light to be used. the light hole will be cut out and the light will attach like oem fitting. There are no Provisions for headlights to work with this kit- this would require custom modification
Item #: CB3101
Condition:
New
In Stock inventory ships within 24 hours. Avio Fiber has a typical eta of 4-6 weeks, Carbon Fiber can take up to 8 weeks due to production times. Please note supply-chain related delays are possible.
Price: $2,094.93
S1000RR Race Fairings
Description:
Parts Included with Kit
upper race faring (6 Dzus)
lower fairing (4 Dzus)
left side panel right side panel
single race seat/Tail unit(2 pcs)
Airbox Cover With side panels Required to install- Bracket kit for Installation (must be purchased separately) IN403B
There are 2 types of Rear Bracket kits- oem and SBK subframe
Optional Not Included -There are 3 options for seats
Basic - This seat is a 15mm neoprene foam glued to a base that is molded from the seat pan of the tail section and then attaches to the seat pan with bolts. Please not that these seat's will only fit carbonin seat pans and seat units. It will not work on any other brand. This foam will wear out like any other foam pad.
Standard - This is an upgrade to the basic seat which is covered in a neoprene material that protects the basic foam and provides the rider a level of grip but without compromising the need to slide side to side. It looks much more professional and will protect the basic foam from any wear from patches on leather suits or abuse from side to side movements. we have seen these seats go on for 3 seasons or more!
Pro Seat - This seat is for riders or teams that require their seat to provide back support or a step seat to keep them in a position from sliding too far back in the seat under acceleration, this is often done with a raised section so they can still get back in the seat in the full tuck, they are just raised up more which helps keep the butt up and their head shoulders and chest lower in the tuck. It is the same material as the standard seat but can also be customized with team logo's or race number -If you purchase a pro seat we will contact you to design your seat. Please note pro seats are made custom to order
upper race faring (6 Dzus)
lower fairing (4 Dzus)
left side panel right side panel
single race seat/Tail unit(2 pcs)
Airbox Cover With side panels Required to install- Bracket kit for Installation (must be purchased separately) IN403B
There are 2 types of Rear Bracket kits- oem and SBK subframe
Optional Not Included -There are 3 options for seats
Basic - This seat is a 15mm neoprene foam glued to a base that is molded from the seat pan of the tail section and then attaches to the seat pan with bolts. Please not that these seat's will only fit carbonin seat pans and seat units. It will not work on any other brand. This foam will wear out like any other foam pad.
Standard - This is an upgrade to the basic seat which is covered in a neoprene material that protects the basic foam and provides the rider a level of grip but without compromising the need to slide side to side. It looks much more professional and will protect the basic foam from any wear from patches on leather suits or abuse from side to side movements. we have seen these seats go on for 3 seasons or more!
Pro Seat - This seat is for riders or teams that require their seat to provide back support or a step seat to keep them in a position from sliding too far back in the seat under acceleration, this is often done with a raised section so they can still get back in the seat in the full tuck, they are just raised up more which helps keep the butt up and their head shoulders and chest lower in the tuck. It is the same material as the standard seat but can also be customized with team logo's or race number -If you purchase a pro seat we will contact you to design your seat. Please note pro seats are made custom to order
Item #: CB42100
Condition:
New
In Stock inventory ships within 24 hours. Avio Fiber has a typical eta of 4-6 weeks, Carbon Fiber can take up to 8 weeks due to production times. Please note supply-chain related delays are possible.
Price: $2,991.04
CBR1000RR-R bodywork
Description:
Carbonin Avio Fiber Race Bodywork (11 pcs w/ 12 Dzus) 2021 Honda CBR1000RR-R
-Will not fit other brands of bodywork
-Created with BSB Team Honda Racing UK
-Dzus are pre-installed, riveted
-Fairings are pre-fitted
-White Gel Coat ready for Prep & Paint
-Avio Fiber fairings are Reinforced with Carbon Fiber along all trim and edging.
Race Bodywork includes:
Upper Race Fairing (4 dzus)
Lower Fairing (4 dzus)
Left Side Panel (2 dzus)
Left Side Panel Wing Cover
Left Side Panel Inner Wing
Right Side Panel (2 dzus)
Right Side Panel Wing Cover
Right Side Panel inner Wing
Tail Unit (2 pcs)
Airbox Cover w/ Side Panels
Brackets Required, but not included with bodywork:
Aluminum Inserts for Tail Unit (4 pcs) ALU2002H
Inox Bracket for Lower Fairing (1 pc) IN2002H
Inox Brackets for Airbox Cover w/ Side Panels (2 pcs) IN2001H
Front fender is optional and not included with Race bodywork.
-Will not fit other brands of bodywork
-Created with BSB Team Honda Racing UK
-Dzus are pre-installed, riveted
-Fairings are pre-fitted
-White Gel Coat ready for Prep & Paint
-Avio Fiber fairings are Reinforced with Carbon Fiber along all trim and edging.
Race Bodywork includes:
Upper Race Fairing (4 dzus)
Lower Fairing (4 dzus)
Left Side Panel (2 dzus)
Left Side Panel Wing Cover
Left Side Panel Inner Wing
Right Side Panel (2 dzus)
Right Side Panel Wing Cover
Right Side Panel inner Wing
Tail Unit (2 pcs)
Airbox Cover w/ Side Panels
Brackets Required, but not included with bodywork:
Aluminum Inserts for Tail Unit (4 pcs) ALU2002H
Inox Bracket for Lower Fairing (1 pc) IN2002H
Inox Brackets for Airbox Cover w/ Side Panels (2 pcs) IN2001H
Front fender is optional and not included with Race bodywork.
Item #: H20200AF
Condition:
New
In Stock inventory ships within 24 hours. Avio Fiber has a typical eta of 4-6 weeks, Carbon Fiber can take up to 8 weeks due to production times. Please note supply-chain related delays are possible.
Price: $1,860.23
ZX10r Bodywork
Description:
• Upper Race Fairing (8 Dzus)
• Lower Fairing
• Left Side Panel (3 Dzus)
• Right Side Panel (3 Dzus)
• Single Race Seat (2 Pcs)
•
• Lower Fairing
• Left Side Panel (3 Dzus)
• Right Side Panel (3 Dzus)
• Single Race Seat (2 Pcs)
•
Item #: K18100AF
Condition:
New
In Stock inventory ships within 24 hours. Avio Fiber has a typical eta of 4-6 weeks, Carbon Fiber can take up to 8 weeks due to production times. Please note supply-chain related delays are possible.
Price: $1,097.47
R6 Carbonin bodywork
Description:
Parts Included in Complete Kit
• upper race fairing (6 Dzus)
• lower fairing
• left side panel 2Dzus
• right side panel 3 Dzus
• single Tail unit (4pcs) Superbike style, OEM seat can not be used
Required Parts
• Stainless steel Seat Unit bracket with dzus *Required to install tail section IN1801Y
• Stainless steel Lower left bracket with dzus **Only required if stock bracket is not present IN1802Y
Not Included
• Fenders
• Airbox Cover
• Seat Unit
• upper race fairing (6 Dzus)
• lower fairing
• left side panel 2Dzus
• right side panel 3 Dzus
• single Tail unit (4pcs) Superbike style, OEM seat can not be used
Required Parts
• Stainless steel Seat Unit bracket with dzus *Required to install tail section IN1801Y
• Stainless steel Lower left bracket with dzus **Only required if stock bracket is not present IN1802Y
Not Included
• Fenders
• Airbox Cover
• Seat Unit
Item #: Y18200AF
Condition:
New
In Stock inventory ships within 24 hours. Avio Fiber has a typical eta of 4-6 weeks, Carbon Fiber can take up to 8 weeks due to production times. Please note supply-chain related delays are possible.
Price: $1,086.80
S1000rr bodywork
Description:
Parts Included In Complete Race Fairing Version 1:
• Upper Race Fairing (6 Dzus)
• Lower Fairing (Oem Radiator; 6 Dzus)
• Left Side Panel (Oem Radiator)
• Right Side Panel (Oem Radiator)
• Single Race Seat (3 Pcs)
Please Note that this Kit has been designed to be used with the REQUIRED bracket kit so the fairing can be mounted to the bike with Dzus fasteners:
Complete aluminum fairing bracket kit (4 pcs with 3 Dzus) ALU3113B
• Upper Race Fairing (6 Dzus)
• Lower Fairing (Oem Radiator; 6 Dzus)
• Left Side Panel (Oem Radiator)
• Right Side Panel (Oem Radiator)
• Single Race Seat (3 Pcs)
Please Note that this Kit has been designed to be used with the REQUIRED bracket kit so the fairing can be mounted to the bike with Dzus fasteners:
Complete aluminum fairing bracket kit (4 pcs with 3 Dzus) ALU3113B
Item #: B3100AF
Condition:
New
In Stock inventory ships within 24 hours. Avio Fiber has a typical eta of 4-6 weeks, Carbon Fiber can take up to 8 weeks due to production times. Please note supply-chain related delays are possible.
Price: $1,028.13
Description:
Replacement right side fairing with Dzus
Item #: K18232AF
Condition:
New
In Stock inventory ships within 24 hours. Avio Fiber has a typical eta of 4-6 weeks, Carbon Fiber can take up to 8 weeks due to production times. Please note supply-chain related delays are possible.
Price: $205.36
ZX10R
Description:
Replacement right side Fairing For Carbonin complete fairing, will not fit with other brands or OEM
Item #: K22232AF
Condition:
New
In Stock inventory ships within 24 hours. Avio Fiber has a typical eta of 4-6 weeks, Carbon Fiber can take up to 8 weeks due to production times. Please note supply-chain related delays are possible.
Price: $289.56
zx10r front wing
Description:
Replacement right side Fairing Cover For Carbonin complete fairing, will not fit with other brands
This is the portion that makes the wing and attaches to the carbonin upper and side panel
This is the portion that makes the wing and attaches to the carbonin upper and side panel
Item #: K22237AF
Condition:
New
In Stock inventory ships within 24 hours. Avio Fiber has a typical eta of 4-6 weeks, Carbon Fiber can take up to 8 weeks due to production times. Please note supply-chain related delays are possible.
Price: $93.85
Description:
Carbonin Avio Fiber Tail Unit (2 pcs) 2021 Honda CBR1000RR-R H20300AF
Replacement Tail Unit For Carbonin complete fairing, will not fit with other brands
-Does not include Required Aluminum Inserts for Tail Unit (4 pcs) ALU2002H
For Fitment Airbox cover is required due to specific kit design Search SKU 20425AF for Avio Fiber or CH20425 for Carbon Fiber
Replacement Tail Unit For Carbonin complete fairing, will not fit with other brands
-Does not include Required Aluminum Inserts for Tail Unit (4 pcs) ALU2002H
For Fitment Airbox cover is required due to specific kit design Search SKU 20425AF for Avio Fiber or CH20425 for Carbon Fiber
Item #: H20300AF
Condition:
New
Limited Supply: Only 1 Left!
In Stock inventory ships within 24 hours. Avio Fiber has a typical eta of 4-6 weeks, Carbon Fiber can take up to 8 weeks due to production times. Please note supply-chain related delays are possible.
Price: $286.70
Description:
Carbonin Avio Fiber Upper Race Fairing (4 Dzus) 2021 Honda CBR1000RR-R H20210AF
Replacement Upper Fairing For Carbonin complete fairing kit, will not fit with other brands
Replacement Upper Fairing For Carbonin complete fairing kit, will not fit with other brands
Item #: H20210AF
Condition:
New
Limited Supply: Only 1 Left!
In Stock inventory ships within 24 hours. Avio Fiber has a typical eta of 4-6 weeks, Carbon Fiber can take up to 8 weeks due to production times. Please note supply-chain related delays are possible.
Price: $237.36
Description:
Replacement upper fairing with Dzus
Item #: K18210AF
Condition:
New
In Stock inventory ships within 24 hours. Avio Fiber has a typical eta of 4-6 weeks, Carbon Fiber can take up to 8 weeks due to production times. Please note supply-chain related delays are possible.
Price: $372.05
zx10rAvio fiber replacement race upper
Description:
Replacement Upper Fairing For Carbonin complete fairing, will not fit with other brands or with oem bodywork
Item #: K22210AF
Condition:
New
In Stock inventory ships within 24 hours. Avio Fiber has a typical eta of 4-6 weeks, Carbon Fiber can take up to 8 weeks due to production times. Please note supply-chain related delays are possible.
Price: $374.90
CBR1000RR-R
Description:
Carbonin Basic Seat Unit Long 2021 Honda CBR1000RR-R FM2010HL
-Requires Carbonin Tail Unit for fitment, will not fit OEM Tail.
Basic Long - This seat is a seat foam unit glued to a base that is molded from the seat pan of the tail section and then attaches to the seat pan with bolts. Please not that these seat's will only fit carbonin seat pans and seat units. It will not work on any other brand. This foam will wear out like any other foam pad. This is the long version which has a lip that comes up the rear of the tail cowl.
-Requires Carbonin Tail Unit for fitment, will not fit OEM Tail.
Basic Long - This seat is a seat foam unit glued to a base that is molded from the seat pan of the tail section and then attaches to the seat pan with bolts. Please not that these seat's will only fit carbonin seat pans and seat units. It will not work on any other brand. This foam will wear out like any other foam pad. This is the long version which has a lip that comes up the rear of the tail cowl.
Item #: FM2010HL
Condition:
New
In Stock inventory ships within 24 hours. Avio Fiber has a typical eta of 4-6 weeks, Carbon Fiber can take up to 8 weeks due to production times. Please note supply-chain related delays are possible.
Price: $136.42
CBR1000RR-R
Description:
Carbonin Basic Seat Unit Short 2021 Honda CBR1000RR-R FM2010HS
-Requires Carbonin Tail Unit for fitment, will not fit OEM Tail.
Basic Short - This seat is a seat foam unit glued to a base that is molded from the seat pan of the tail section and then attaches to the seat pan with bolts. Please not that these seat's will only fit carbonin seat pans and seat units. It will not work on any other brand. This foam will wear out like any other foam pad.
-Requires Carbonin Tail Unit for fitment, will not fit OEM Tail.
Basic Short - This seat is a seat foam unit glued to a base that is molded from the seat pan of the tail section and then attaches to the seat pan with bolts. Please not that these seat's will only fit carbonin seat pans and seat units. It will not work on any other brand. This foam will wear out like any other foam pad.
Item #: FM2010HS
Condition:
New
In Stock inventory ships within 24 hours. Avio Fiber has a typical eta of 4-6 weeks, Carbon Fiber can take up to 8 weeks due to production times. Please note supply-chain related delays are possible.
Price: $118.22
Description:
Carbonin Carbon Fiber Airbox Cover with Side Panels 2021 Honda CBR1000RR-R CH20425
-will not fit with other brands
-Required for fitment with Carbonin 2021 Honda CBR1000RR-R tail unit in Carbon Fiber CH20300 or Avio Fiber H20300AF
-Does not include Required Brackets for Airbox Cover (2 pcs) IN2001H
-will not fit with other brands
-Required for fitment with Carbonin 2021 Honda CBR1000RR-R tail unit in Carbon Fiber CH20300 or Avio Fiber H20300AF
-Does not include Required Brackets for Airbox Cover (2 pcs) IN2001H
Item #: CH20425
Condition:
New
In Stock inventory ships within 24 hours. Avio Fiber has a typical eta of 4-6 weeks, Carbon Fiber can take up to 8 weeks due to production times. Please note supply-chain related delays are possible.
Price: $438.72
Description:
Carbonin Carbon Fiber Battery Tray Cover 2021 Honda CBR1000RR-R CH2009
-will not fit with other brands
-will not fit with other brands
Item #: CH2009
Condition:
New
Limited Supply: Only 1 Left!
In Stock inventory ships within 24 hours. Avio Fiber has a typical eta of 4-6 weeks, Carbon Fiber can take up to 8 weeks due to production times. Please note supply-chain related delays are possible.
Price: $233.36
Description:
Carbonin Carbon Fiber Fork Bridge Cowl 2021 Honda CBR1000RR-R CH20072
-Air Shroud aka cowl underneath Upper Fairing
-Air Shroud aka cowl underneath Upper Fairing
Item #: CH20072
Condition:
New
In Stock inventory ships within 24 hours. Avio Fiber has a typical eta of 4-6 weeks, Carbon Fiber can take up to 8 weeks due to production times. Please note supply-chain related delays are possible.
Price: $153.35
Description:
Carbonin Carbon Fiber Frame Protectors 2021 Honda CBR1000RR-R CH20050
-For Install Use prep frame with rubbing alcohol and use HQ silicone sparingly and let dry over night with clamped down with zip ties.
-For Install Use prep frame with rubbing alcohol and use HQ silicone sparingly and let dry over night with clamped down with zip ties.
Item #: CH20050
Condition:
New
In Stock inventory ships within 24 hours. Avio Fiber has a typical eta of 4-6 weeks, Carbon Fiber can take up to 8 weeks due to production times. Please note supply-chain related delays are possible.
Price: $325.37
Description:
Carbonin Carbon Fiber Front Fender 2021 Honda CBR1000RR-R CH20010
-OEM Replacement
-OEM Replacement
Item #: CH20010
Condition:
New
Limited Supply: Only 1 Left!
In Stock inventory ships within 24 hours. Avio Fiber has a typical eta of 4-6 weeks, Carbon Fiber can take up to 8 weeks due to production times. Please note supply-chain related delays are possible.
Price: $233.36
Description:
Replacement left side Fairing For Carbonin complete fairing, will not fit with other brands
Item #: CK18231
Condition:
New
In Stock inventory ships within 24 hours. Avio Fiber has a typical eta of 4-6 weeks, Carbon Fiber can take up to 8 weeks due to production times. Please note supply-chain related delays are possible.
Price: $396.72
ZX10r Replacement side panel
Description:
Replacement left side Fairing For Carbonin complete fairing, will not fit with other brands
Item #: CK22231
Condition:
New
In Stock inventory ships within 24 hours. Avio Fiber has a typical eta of 4-6 weeks, Carbon Fiber can take up to 8 weeks due to production times. Please note supply-chain related delays are possible.
Price: $433.07
zx10r front wing
Description:
Replacement left side Fairing Cover For Carbonin complete fairing, will not fit with other brands
This is the portion that makes the wing and attaches to the carbonin upper and side panel
This is the portion that makes the wing and attaches to the carbonin upper and side panel
Item #: CK22236
Condition:
New
In Stock inventory ships within 24 hours. Avio Fiber has a typical eta of 4-6 weeks, Carbon Fiber can take up to 8 weeks due to production times. Please note supply-chain related delays are possible.
Price: $134.11
Description:
Replacement lower race Fairing For Carbonin complete fairing, will not fit with other brands
Item #: CK18220
Condition:
New
In Stock inventory ships within 24 hours. Avio Fiber has a typical eta of 4-6 weeks, Carbon Fiber can take up to 8 weeks due to production times. Please note supply-chain related delays are possible.
Price: $356.04
ZX10r Replacement Carbon race lower
Description:
Replacement lower race Fairing For Carbonin complete fairing, will not fit with other brands
This will work with Kickstand
This will work with Kickstand
Item #: CK22220
Condition:
New
In Stock inventory ships within 24 hours. Avio Fiber has a typical eta of 4-6 weeks, Carbon Fiber can take up to 8 weeks due to production times. Please note supply-chain related delays are possible.
Price: $331.09
Description:
Carbonin Carbon Fiber Race Airtube 2021 Honda CBR1000RR-R CH20064
-Does not include Required Dashboard Holder ALU2001H
-Made for Carbonin; May or may not fit OEM fairings
-Does not include Required Dashboard Holder ALU2001H
-Made for Carbonin; May or may not fit OEM fairings
Item #: CH20064
Condition:
New
In Stock inventory ships within 24 hours. Avio Fiber has a typical eta of 4-6 weeks, Carbon Fiber can take up to 8 weeks due to production times. Please note supply-chain related delays are possible.
Price: $250.70
Description:
Carbonin Carbon Fiber Rear Fender 2021 Honda CBR1000RR-R CH20020
-OEM Replacement
-OEM Replacement
Item #: CH20020
Condition:
New
In Stock inventory ships within 24 hours. Avio Fiber has a typical eta of 4-6 weeks, Carbon Fiber can take up to 8 weeks due to production times. Please note supply-chain related delays are possible.
Price: $206.69
Description:
Replacement right side Fairing For Carbonin complete fairing, will not fit with other brands
Item #: CK18232
Condition:
New
In Stock inventory ships within 24 hours. Avio Fiber has a typical eta of 4-6 weeks, Carbon Fiber can take up to 8 weeks due to production times. Please note supply-chain related delays are possible.
Price: $396.72
Description:
Replacement right side Fairing For Carbonin complete fairing, will not fit with other brands
Item #: CK22232
Condition:
New
In Stock inventory ships within 24 hours. Avio Fiber has a typical eta of 4-6 weeks, Carbon Fiber can take up to 8 weeks due to production times. Please note supply-chain related delays are possible.
Price: $433.07
zx10r front wing
Description:
Replacement right side Fairing Cover For Carbonin complete fairing, will not fit with other brands
This is the portion that makes the wing and attaches to the carbonin upper and side panel
This is the portion that makes the wing and attaches to the carbonin upper and side panel
Item #: CK22237
Condition:
New
In Stock inventory ships within 24 hours. Avio Fiber has a typical eta of 4-6 weeks, Carbon Fiber can take up to 8 weeks due to production times. Please note supply-chain related delays are possible.
Price: $134.11
Description:
Carbonin Carbon Fiber Swingarm Protectors 2021 Honda CBR1000RR-R CH20055
-For Install Use prep frame with rubbing alcohol and use HQ silicone sparingly and let dry over night with clamped down with zip ties.
-For Install Use prep frame with rubbing alcohol and use HQ silicone sparingly and let dry over night with clamped down with zip ties.
Item #: CH20055
Condition:
New
In Stock inventory ships within 24 hours. Avio Fiber has a typical eta of 4-6 weeks, Carbon Fiber can take up to 8 weeks due to production times. Please note supply-chain related delays are possible.
Price: $233.36
Description:
Carbonin Carbon Fiber Tail Unit (2 pcs) 2021 Honda CBR1000RR-R CH20300
Replacement Tail Unit For Carbonin complete fairing, will not fit with other brands
-Does not include Required Aluminum Inserts for Tail Unit (4 pcs) ALU2002H
Replacement Tail Unit For Carbonin complete fairing, will not fit with other brands
-Does not include Required Aluminum Inserts for Tail Unit (4 pcs) ALU2002H
Item #: CH20300
Condition:
New
In Stock inventory ships within 24 hours. Avio Fiber has a typical eta of 4-6 weeks, Carbon Fiber can take up to 8 weeks due to production times. Please note supply-chain related delays are possible.
Price: $520.07
Description:
Replacement SBK Tail unit for carbonin bodywork
Item #: CK18300
Condition:
New
In Stock inventory ships within 24 hours. Avio Fiber has a typical eta of 4-6 weeks, Carbon Fiber can take up to 8 weeks due to production times. Please note supply-chain related delays are possible.
Price: $656.08
Description:
Carbonin Carbon Fiber Upper Race Fairing (4 Dzus) 2021 Honda CBR1000RR-R CH20210
Replacement Upper Fairing For Carbonin complete fairing, will not fit with other brands
Replacement Upper Fairing For Carbonin complete fairing, will not fit with other brands
Item #: CH20210
Condition:
New
In Stock inventory ships within 24 hours. Avio Fiber has a typical eta of 4-6 weeks, Carbon Fiber can take up to 8 weeks due to production times. Please note supply-chain related delays are possible.
Price: $424.05
Description:
Replacement Upper Fairing For Carbonin complete fairing, will not fit with other brands
Item #: CK18210
Condition:
New
In Stock inventory ships within 24 hours. Avio Fiber has a typical eta of 4-6 weeks, Carbon Fiber can take up to 8 weeks due to production times. Please note supply-chain related delays are possible.
Price: $593.41
zx10r carbon fiber replacement race upper
Description:
Replacement Upper Fairing For Carbonin complete fairing, will not fit with other brands
Item #: CK22210
Condition:
New
In Stock inventory ships within 24 hours. Avio Fiber has a typical eta of 4-6 weeks, Carbon Fiber can take up to 8 weeks due to production times. Please note supply-chain related delays are possible.
Price: $599.31
CBR1000RR-R
Description:
Carbonin Inox Bracket for Lower Fairing (1 pc) 2021 Honda CBR1000RR-R IN2002H
-Required for fitment of Carbonin 2021 Honda CBR1000RR-R Lower fairing in Carbon Fiber CH20220 or Avio Fiber H20220AF
-Required for fitment of Carbonin 2021 Honda CBR1000RR-R Lower fairing in Carbon Fiber CH20220 or Avio Fiber H20220AF
Item #: IN2002H
Condition:
New
In Stock inventory ships within 24 hours. Avio Fiber has a typical eta of 4-6 weeks, Carbon Fiber can take up to 8 weeks due to production times. Please note supply-chain related delays are possible.
Price: $30.67
CBR1000RR-R
Description:
Carbonin Inox Brackets for Airbox Cover (2 pcs) 2021 Honda CBR1000RR-R IN2001H
-Required for fitment of Carbonin 2021 Honda CBR1000RR-R Airbox Cover in Carbon Fiber CH20425 or Avio Fiber H20245AF
-Required for fitment of Carbonin 2021 Honda CBR1000RR-R Airbox Cover in Carbon Fiber CH20425 or Avio Fiber H20245AF
Item #: IN2001H
Condition:
New
In Stock inventory ships within 24 hours. Avio Fiber has a typical eta of 4-6 weeks, Carbon Fiber can take up to 8 weeks due to production times. Please note supply-chain related delays are possible.
Price: $53.08
Description:
Carbonin Pro Seat Unit Long 2021 Honda CBR1000RR-R FM260HL
-Requires Carbonin Tail Unit for fitment, will not fit OEM Tail.
Long seats have a lip that comes up the tail units cowl
Pro Seat Long - This Customizable seat is for riders or teams that require their seat to provide back support or a step seat to keep them in a position from sliding too far back in the seat under acceleration, this is often done with a raised section so they can still get back in the seat in the full tuck, they are just raised up more which helps keep the butt up and their head shoulders and chest lower in the tuck. It is the same material as the standard seat but can also be customized with team logo's or race number -If you purchase a pro seat we will contact you to design your seat padding and add your own logo. Please note pro seats are made to order. We will contact you after the order is processed to go thru the creative design process.
-Requires Carbonin Tail Unit for fitment, will not fit OEM Tail.
Long seats have a lip that comes up the tail units cowl
Pro Seat Long - This Customizable seat is for riders or teams that require their seat to provide back support or a step seat to keep them in a position from sliding too far back in the seat under acceleration, this is often done with a raised section so they can still get back in the seat in the full tuck, they are just raised up more which helps keep the butt up and their head shoulders and chest lower in the tuck. It is the same material as the standard seat but can also be customized with team logo's or race number -If you purchase a pro seat we will contact you to design your seat padding and add your own logo. Please note pro seats are made to order. We will contact you after the order is processed to go thru the creative design process.
Item #: FM260HL
Condition:
New
In Stock inventory ships within 24 hours. Avio Fiber has a typical eta of 4-6 weeks, Carbon Fiber can take up to 8 weeks due to production times. Please note supply-chain related delays are possible.
Price: $346.37
CBR1000RR-R
Description:
Carbonin Pro Seat Unit Short 2021 Honda CBR1000RR-R FM260HS
-Requires Carbonin Tail Unit for fitment, will not fit OEM Tail.
Pro Seat Short - This Customizable seat is for riders or teams that require their seat to provide back support or a step seat to keep them in a position from sliding too far back in the seat under acceleration, this is often done with a raised section so they can still get back in the seat in the full tuck, they are just raised up more which helps keep the butt up and their head shoulders and chest lower in the tuck. It is the same material as the standard seat but can also be customized with team logo's or race number -If you purchase a pro seat we will contact you to design your seat padding and add your own logo. Please note pro seats are made to order. We will contact you after the order is processed to go thru the creative design process.
-Requires Carbonin Tail Unit for fitment, will not fit OEM Tail.
Pro Seat Short - This Customizable seat is for riders or teams that require their seat to provide back support or a step seat to keep them in a position from sliding too far back in the seat under acceleration, this is often done with a raised section so they can still get back in the seat in the full tuck, they are just raised up more which helps keep the butt up and their head shoulders and chest lower in the tuck. It is the same material as the standard seat but can also be customized with team logo's or race number -If you purchase a pro seat we will contact you to design your seat padding and add your own logo. Please note pro seats are made to order. We will contact you after the order is processed to go thru the creative design process.
Item #: FM260HS
Condition:
New
In Stock inventory ships within 24 hours. Avio Fiber has a typical eta of 4-6 weeks, Carbon Fiber can take up to 8 weeks due to production times. Please note supply-chain related delays are possible.
Price: $325.37
Description:
Carbonin Standard Seat Unit Long 2021 Honda CBR1000RR-R FM2050HL
-Requires Carbonin Tail Unit for fitment, will not fit OEM Tail.
Long seats have a lip that comes up the tail units cowl
Standard Long - This is an upgrade to the basic seat which is covered in a neoprene material that protects the basic foam and provides the rider a level of grip but without compromising the need to slide side to side. It looks much more professional and will protect the basic foam from any wear from patches on leather suits or abuse from side to side movements. we have seen these seats go on for 3 seasons or more. Comes with standard red Carbonin embroidered logo.
-Requires Carbonin Tail Unit for fitment, will not fit OEM Tail.
Long seats have a lip that comes up the tail units cowl
Standard Long - This is an upgrade to the basic seat which is covered in a neoprene material that protects the basic foam and provides the rider a level of grip but without compromising the need to slide side to side. It looks much more professional and will protect the basic foam from any wear from patches on leather suits or abuse from side to side movements. we have seen these seats go on for 3 seasons or more. Comes with standard red Carbonin embroidered logo.
Item #: FM2050HL
Condition:
New
Limited Supply: Only 1 Left!
In Stock inventory ships within 24 hours. Avio Fiber has a typical eta of 4-6 weeks, Carbon Fiber can take up to 8 weeks due to production times. Please note supply-chain related delays are possible.
Price: $259.70
Description:
Carbonin Standard Seat Unit Short 2021 Honda CBR1000RR-R FM2050HS
-Requires Carbonin Tail Unit for fitment, will not fit OEM Tail.
Standard Short - This is an upgrade to the basic seat which is covered in a neoprene material that protects the basic foam and provides the rider a level of grip but without compromising the need to slide side to side. It looks much more professional and will protect the basic foam from any wear from patches on leather suits or abuse from side to side movements. we have seen these seats go on for 3 seasons or more. Comes with standard red Carbonin embroidered logo.
-Requires Carbonin Tail Unit for fitment, will not fit OEM Tail.
Standard Short - This is an upgrade to the basic seat which is covered in a neoprene material that protects the basic foam and provides the rider a level of grip but without compromising the need to slide side to side. It looks much more professional and will protect the basic foam from any wear from patches on leather suits or abuse from side to side movements. we have seen these seats go on for 3 seasons or more. Comes with standard red Carbonin embroidered logo.
Item #: FM2050HS
Condition:
New
In Stock inventory ships within 24 hours. Avio Fiber has a typical eta of 4-6 weeks, Carbon Fiber can take up to 8 weeks due to production times. Please note supply-chain related delays are possible.
Price: $238.70
Description:
Carbonin Aluminum Dashboard Holder 2021 Honda CBR1000RR-R ALU2001H
-Does not include Required Airtube in Carbon Fiber CH20064 or Avio Fiber H20064AF
-Does not include Required Airtube in Carbon Fiber CH20064 or Avio Fiber H20064AF
Item #: ALU2001H
Condition:
New
Limited Supply: Only 1 Left!
In Stock inventory ships within 24 hours. Avio Fiber has a typical eta of 4-6 weeks, Carbon Fiber can take up to 8 weeks due to production times. Please note supply-chain related delays are possible.
Price: $189.36
CBR1000RR-R
Description:
Carbonin Aluminum Inserts for Tail Unit (4 pcs) 2021 Honda CBR1000RR-R ALU2002H
-Required for fitment of Carbonin 2021 Honda CBR1000RR-R Tail Unit in carbon fiber CH20300 or avio fiber H20300AF
-Required for fitment of Carbonin 2021 Honda CBR1000RR-R Tail Unit in carbon fiber CH20300 or avio fiber H20300AF
Item #: ALU2002H
Condition:
New
In Stock inventory ships within 24 hours. Avio Fiber has a typical eta of 4-6 weeks, Carbon Fiber can take up to 8 weeks due to production times. Please note supply-chain related delays are possible.
Price: $109.08
Description:
"This is a 1 piece airbox cover that has the side panels built in to Replace the oem Airbox Cover and side panels
It comes Ready to install on your Bike with Perfect Fitment
Made from avio fiber with epoxy resin"
It comes Ready to install on your Bike with Perfect Fitment
Made from avio fiber with epoxy resin"
Item #: Y19425AF
Condition:
New
Limited Supply: Only 1 Left!
In Stock inventory ships within 24 hours. Avio Fiber has a typical eta of 4-6 weeks, Carbon Fiber can take up to 8 weeks due to production times. Please note supply-chain related delays are possible.
Price: $257.37
Popular Brands:
More About Bodywork
Carbon fiber and Avio fiber race bodywork kits by Carbonin come preinstalled with Dzus fasteners and are the finest kits you can buy for your motorcycle. Our aftermarket motorcycle fairings and bodywork use the very best in materials and scanning technology in their molding process to guarantee the best fit. We also carry Zero Gravity, Puig, and MRA Screens for your street or race bike. If you’re looking for top-of-the-line aftermarket motorcycle bodywork, fairings, and windshields, you’ve come to the right place.