- Home »
- Catalog »
- Chassis & Suspension »
- Suspension & Dampers »
- Front suspension »
- Cartridge Kit
HHR Performance » Öhlins
Browse Cartridge Kit Products
STX 22 Cartridge Kit MX & Enduro FCX 101-20
These kits are designed based on the Öhlins TTX22 cartridge kit for the bigger bikes and share a lot of the features with these kits and the experience it has from top level racing around the world. As such it’s one of the most powerful cartridge kits available for 85cc bikes.
This kit has been designed to rise very low above the fork leg ends, thus allowing the forks to be mounted far up in the triple clamps with a small clearance to the handlebars. This allows for lower bikes for the smaller riders in the class. Click adjusters and air breather are easily reachable as they are angled out from underneath the handlebar.
The kit is also designed to achieve a quick and continuous response in the damping which directly slows down upcoming motions without harshness. It has a very reliable and constant damping characteristic in every stroke and during the whole race so the behavior is predictable and consistent.
Part number
FCX 101-20
Type Code
STX Cartridge Kit MX
Technical data
Stroke: | 272 mm mm |
---|---|
Position: | front |
Spring series: | 08789-XX |
Recommended oil: | 01330 |
Packaging unit: | pair |
Notes
Front fork springs need to be ordered separately. It is recommended to contact an Öhlins Service Center for installation.
Fits for vehicles
KTM 85 SX (2018 – 2020)
- Without "Teilegutachten" (Germany)
- Racing product, not for use on public roads
Husqvarna TC 85 (2018 – 2020)
- Without "Teilegutachten" (Germany)
- Racing product, not for use on public roads
STX 22 Cartridge Kit MX & Enduro FCX 102 -20
These kits are designed based on the Öhlins TTX22 cartridge kit for the bigger bikes and share a lot of the features with these kits and the experience it has from top level racing around the world. As such it’s one of the most powerful cartridge kits available for 85cc bikes.
This kit has been designed to rise very low above the fork leg ends, thus allowing the forks to be mounted far up in the triple clamps with a small clearance to the handlebars. This allows for lower bikes for the smaller riders in the class. Click adjusters and air breather are easily reachable as they are angled out from underneath the handlebar.
The kit is also designed to achieve a quick and continuous response in the damping which directly slows down upcoming motions without harshness. It has a very reliable and constant damping characteristic in every stroke and during the whole race so the behavior is predictable and consistent.
Part number
FCX 102 -20
Type Code
STX Cartridge Kit MX
Technical data
Stroke: | 272 mm mm |
---|---|
Position: | front |
Spring series: | 08789-XX |
Recommended oil: | 01330 |
Packaging unit: | pair |
Notes
Front fork springs need to be ordered separately. It is recommended to contact an Öhlins Service Center for installation.
Fits for vehicles
KTM 85 SX (2018 – 2020)
- Without "Teilegutachten" (Germany)
- Racing product, not for use on public roads
Husqvarna TC 85 (2018 – 2020)
- Without "Teilegutachten" (Germany)
- Racing product, not for use on public roads
STX 22 Cartridge Kit MX & Enduro FCX 103-20
These kits are designed based on the Öhlins TTX22 cartridge kit for the bigger bikes and share a lot of the features with these kits and the experience it has from top level racing around the world. As such it’s one of the most powerful cartridge kits available for 85cc bikes.
This kit has been designed to rise very low above the fork leg ends, thus allowing the forks to be mounted far up in the triple clamps with a small clearance to the handlebars. This allows for lower bikes for the smaller riders in the class. Click adjusters and air breather are easily reachable as they are angled out from underneath the handlebar.
The kit is also designed to achieve a quick and continuous response in the damping which directly slows down upcoming motions without harshness. It has a very reliable and constant damping characteristic in every stroke and during the whole race so the behavior is predictable and consistent.
Part number
FCX 103-20
Type Code
STX Cartridge Kit MX
Technical data
Stroke: | 272 mm mm |
---|---|
Position: | front |
Spring series: | 08789-XX |
Recommended oil: | 01330 |
Packaging unit: | pair |
Notes
Front fork springs need to be ordered separately. It is recommended to contact an Öhlins Service Center for installation.
Fits for vehicles
KTM 85 SX (2018 – 2020)
- Without "Teilegutachten" (Germany)
- Racing product, not for use on public roads
Husqvarna TC 85 (2018 – 2020)
- Without "Teilegutachten" (Germany)
- Racing product, not for use on public roads
The Öhlins FDK 100 cartridge kit is a great performance upgrade for your bike.
The Öhlins FDK 100 cartridge kit is a great performance upgrade for your bike. Improved handling, cornering and braking are immediately noticed. Full maintenance capability. Alternative spring rates available.
Note: (Springs Sold Separately Use Springs Series 08790-)
NIX 30 Cartridge Kit FGK 202
Our 30 mm front fork cartridge kit is based on experience gained from international Supersport and Superstock championships. It doesn’t matter if you are heading for a national road racing title or if you are taking your bike to the local race track. The cartridge kit will give you loads of performance, stable damping characteristics and fantastic comfort.
The kit has a unique design with compression damping and the adjustment on the left leg and rebound damping
and the adjustment on the right leg – i.e. all adjustments are made at the top together with the spring preload!
The cartridge kit system fits bolt on in most standard hyper sport front forks.
Part number
FGK 202
Type Code
30mm Cartridge Kit R&T
Technical data
Stroke: | 120 mm |
---|---|
Position: | front |
Spring series: | 08790-Serie |
Notes
It is recommended to contact an authorised ÖHLINS Service Center for installation.
Fits for vehicles
Yamaha YZF-R6 (2008 – 2015)
- Teilegutachten (Germany)
- "ABE" in preparation (Germany)
Download
- Mounting Instructions FGK 210 English (552,0 KB)
- Owner´s Manual 30mm Cartridge Kit Road & Track English (1.996,0 KB)
- Mounting Instructions FGK 210 German (608,3 KB)
- Owner´s Manual 30mm Cartridge Kit Road & Track German (2.541,2 KB)
Note: (Springs Sold Separately Use Springs Series 08790-)
NIX 30 Cartridge Kit FGK 203
Our 30 mm front fork cartridge kit is based on experience gained from international Supersport and Superstock championships. It doesn’t matter if you are heading for a national road racing title or if you are taking your bike to the local race track. The cartridge kit will give you loads of performance, stable damping characteristics and fantastic comfort.
The kit has a unique design with compression damping and the adjustment on the left leg and rebound damping
and the adjustment on the right leg – i.e. all adjustments are made at the top together with the spring preload!
The cartridge kit system fits bolt on in most standard hyper sport front forks.
Part number
FGK 203
Type Code
30mm Cartridge Kit R&T
Technical data
Stroke: | 122 mm |
---|---|
Position: | front |
Spring series: | 08790-Serie |
Notes
For models with and without ABS. It is recommended to contact an authorised ÖHLINS Service Center for installation.
Fits for vehicles
Honda CBR1000RR (2008 – 2011)
- Teilegutachten (Germany)
- "ABE" in preparation (Germany)
- For both models with and without ABS.
Download
- Mounting Instructions FGK 203 English (1.295,6 KB)
- Owner´s Manual 30mm Cartridge Kit Road & Track English (1.996,0 KB)
- Mounting Instructions FGK 203 German (1.317,3 KB)
- Owner´s Manual 30mm Cartridge Kit Road & Track German (2.541,2 KB)
Note: (Springs Sold Separately Use Springs Series 08790-)
NIX 30 Cartridge Kit FGK 204
Our 30 mm front fork cartridge kit is based on experience gained from international Supersport and Superstock championships. It doesn’t matter if you are heading for a national road racing title or if you are taking your bike to the local race track. The cartridge kit will give you loads of performance, stable damping characteristics and fantastic comfort.
The kit has a unique design with compression damping and the adjustment on the left leg and rebound damping
and the adjustment on the right leg – i.e. all adjustments are made at the top together with the spring preload!
The cartridge kit system fits bolt on in most standard hyper sport front forks.
Part number
FGK 204
Type Code
30mm Cartridge Kit R&T
Technical data
Stroke: | 130 mm |
---|---|
Position: | front |
Spring series: | 08790-Serie |
Notes
For models with and without ABS.
It is recommended to contact an authorised ÖHLINS Service Center for installation.
Fits for vehicles
Honda CBR600RR (2007 – 2012)
- Teilegutachten (Germany)
Download
- Mounting Instructions FGK 204 English (1.225,4 KB)
- Owner´s Manual 30mm Cartridge Kit Road & Track English (1.996,0 KB)
- Mounting Instructions FGK 204 German (1.244,1 KB)
- Owner´s Manual 30mm Cartridge Kit Road & Track German (2.541,2 KB)
Note: (Springs Sold Separately Use Springs Series 08790-)
NIX 30 Cartridge Kit FGK 206
Our 30 mm front fork cartridge kit is based on experience gained from international Supersport and Superstock championships. It doesn’t matter if you are heading for a national road racing title or if you are taking your bike to the local race track. The cartridge kit will give you loads of performance, stable damping characteristics and fantastic comfort.
The kit has a unique design with compression damping and the adjustment on the left leg and rebound damping
and the adjustment on the right leg – i.e. all adjustments are made at the top together with the spring preload!
The cartridge kit system fits bolt on in most standard hyper sport front forks.
Part number
FGK 206
Type Code
30mm Cartridge Kit R&T
Technical data
Stroke: | 120 mm |
---|---|
Position: | front |
Spring series: | 08790-Serie |
Notes
It is recommended to contact an authorised ÖHLINS Service Center for installation.
Fits for vehicles
Kawasaki Ninja ZX-6R (2009 – 2016)
- Teilegutachten (Germany)
Download
- Mounting Instructions FGK 206 English (1.085,0 KB)
- Owner´s Manual 30mm Cartridge Kit Road & Track English (1.996,0 KB)
- Mounting Instructions FGK 206 German (644,0 KB)
- Owner´s Manual 30mm Cartridge Kit Road & Track German (2.541,2 KB)
Note: (Springs Sold Separately Use Springs Series 08790-)
NIX 30 Cartridge Kit FGK 210
Our 30 mm front fork cartridge kit is based on experience gained from international Supersport and Superstock championships. It doesn’t matter if you are heading for a national road racing title or if you are taking your bike to the local race track. The cartridge kit will give you loads of performance, stable damping characteristics and fantastic comfort.
The kit has a unique design with compression damping and the adjustment on the left leg and rebound damping
and the adjustment on the right leg – i.e. all adjustments are made at the top together with the spring preload!
The cartridge kit system fits bolt on in most standard hyper sport front forks.
Part number
FGK 210
Type Code
30mm Cartridge Kit R&T
Technical data
Stroke: | 120 mm |
---|---|
Position: | front |
Spring series: | 08790-Serie |
Notes
It is recommended to contact an authorised ÖHLINS Service Center for installation.
Fits for vehicles
Ducati 1098 (2007 – 2008)
- Teilegutachten (Germany)
Ducati 1198 (2009 – 2011)
- Teilegutachten (Germany)
Ducati 848 (2008 – 2013)
- Teilegutachten (Germany)
Download
- Mounting Instructions FGK 210 English (1.254,7 KB)
- Owner´s Manual 30mm Cartridge Kit Road & Track English (1.996,0 KB)
- Mounting Instructions FGK 210 German (1.284,0 KB)
- Owner´s Manual 30mm Cartridge Kit Road & Track German (2.541,2 KB)
Note: (Springs Sold Separately Use Springs Series 08790-)
NIX 30 Cartridge Kit FGK 212
Our 30 mm front fork cartridge kit is based on experience gained from international Supersport and Superstock championships. It doesn’t matter if you are heading for a national road racing title or if you are taking your bike to the local race track. The cartridge kit will give you loads of performance, stable damping characteristics and fantastic comfort.
The kit has a unique design with compression damping and the adjustment on the left leg and rebound damping
and the adjustment on the right leg – i.e. all adjustments are made at the top together with the spring preload!
The cartridge kit system fits bolt on in most standard hyper sport front forks.
Part number
FGK 212
Type Code
30mm Cartridge Kit R&T
Technical data
Stroke: | 120 mm |
---|---|
Position: | front |
Spring series: | 08790-Serie |
Notes
On DDC equipped bikes only to be used with Öhlins shock absorber
It is recommended to contact an authorised ÖHLINS Service Center for installation.
Fits for vehicles
BMW S 1000 RR (2008 – 2016)
- ABE (Germany)
BMW S 1000 RR (2017 – 2018)
- ABE (Germany)
BMW S 1000 RR HP4 (2013 – 2014)
- ABE (Germany)
Download
- Mounting Instructions FGK 212 English (574,9 KB)
- Owner´s Manual 30mm Cartridge Kit Road & Track English (1.996,0 KB)
- Mounting Instructions FGK 212 German (1.335,1 KB)
- Owner´s Manual 30mm Cartridge Kit Road & Track German (2.541,2 KB)
Note: (Springs Sold Separately Use Springs Series 08790-)
NIX 30 Cartridge Kit FGK 216
Our 30 mm front fork cartridge kit is based on experience gained from international Supersport and Superstock championships. It doesn’t matter if you are heading for a national road racing title or if you are taking your bike to the local race track. The cartridge kit will give you loads of performance, stable damping characteristics and fantastic comfort.
The kit has a unique design with compression damping and the adjustment on the left leg and rebound damping
and the adjustment on the right leg – i.e. all adjustments are made at the top together with the spring preload!
The cartridge kit system fits bolt on in most standard hyper sport front forks.
Part number
FGK 216
Type Code
30mm Cartridge Kit R&T
Technical data
Stroke: | 120 mm |
---|---|
Position: | front |
Spring series: | 08790-Serie |
Notes
It is recommended to contact an authorised ÖHLINS Service Center for installation.
Fits for vehicles
Kawasaki Ninja ZX-10R (2011 – 2015)
- Teilegutachten (Germany)
Download
- Mounting Instructions FGK 216 English (1.110,2 KB)
- Owner´s Manual 30mm Cartridge Kit Road & Track English (1.996,0 KB)
- Mounting Instructions FGK 216 German (1.639,5 KB)
- Owner´s Manual 30mm Cartridge Kit Road & Track German (2.541,2 KB)
Note: (Springs Sold Separately Use Springs Series 08790-)
NIX 30 Cartridge Kit FGK 217
Our 30 mm front fork cartridge kit is based on experience gained from international Supersport and Superstock championships. It doesn’t matter if you are heading for a national road racing title or if you are taking your bike to the local race track. The cartridge kit will give you loads of performance, stable damping characteristics and fantastic comfort.
The kit has a unique design with compression damping and the adjustment on the left leg and rebound damping
and the adjustment on the right leg – i.e. all adjustments are made at the top together with the spring preload!
The cartridge kit system fits bolt on in most standard hyper sport front forks.
Part number
FGK 217
Type Code
30mm Cartridge Kit R&T
Technical data
Stroke: | 120 mm |
---|---|
Position: | front |
Spring series: | 08790-Serie |
Notes
It is recommended to contact an authorised ÖHLINS Service Center for installation.
Fits for vehicles
Suzuki GSX-R600 (2011 – 2016)
- Teilegutachten (Germany)
Suzuki GSX-R600 (2017 – 2019)
- Without "Teilegutachten" (Germany)
Suzuki GSX-R750 (2011 – 2016)
- Teilegutachten (Germany)
Suzuki GSX-R750 (2017 – 2019)
- Without "Teilegutachten" (Germany)
Download
- Mounting Instructions FGK 217 English (1.112,2 KB)
- Owner´s Manual 30mm Cartridge Kit Road & Track English (1.996,0 KB)
- Mounting Instructions FGK 217 German (1.711,2 KB)
- Owner´s Manual 30mm Cartridge Kit Road & Track German (2.541,2 KB)
Note: (Springs Sold Separately Use Springs Series 08790-)
NIX 30 Cartridge Kit FGK 221
Our 30 mm front fork cartridge kit is based on experience gained from international Supersport and Superstock championships. It doesn’t matter if you are heading for a national road racing title or if you are taking your bike to the local race track. The cartridge kit will give you loads of performance, stable damping characteristics and fantastic comfort.
The kit has a unique design with compression damping and the adjustment on the left leg and rebound damping
and the adjustment on the right leg – i.e. all adjustments are made at the top together with the spring preload!
The cartridge kit system fits bolt on in most standard hyper sport front forks.
Part number
FGK 221
Type Code
30mm Cartridge Kit R&T
Technical data
Stroke: | 120 mm |
---|---|
Position: | front |
Spring series: | 08790-Serie |
Notes
It is recommended to contact an authorised ÖHLINS Service Center for installation.
Fits for vehicles
Suzuki GSX-R 1000 (2012 – 2016)
- Teilegutachten (Germany)
Suzuki GSX-R 1000 (2017 – 2019)
- Without "Teilegutachten" (Germany)
Download
- Mounting Instructions FGK 221 English (1.212,3 KB)
- Owner´s Manual 30mm Cartridge Kit Road & Track English (1.996,0 KB)
- Mounting Instructions FGK 221 German (947,8 KB)
- Owner´s Manual 30mm Cartridge Kit Road & Track German (2.541,2 KB)
Note: (Springs Sold Separately Use Springs Series 08790-)
NIX 30 Cartridge Kit FGK 226
Our 30 mm front fork cartridge kit is based on experience gained from international Supersport and Superstock championships. It doesn’t matter if you are heading for a national road racing title or if you are taking your bike to the local race track. The cartridge kit will give you loads of performance, stable damping characteristics and fantastic comfort.
The kit has a unique design with compression damping and the adjustment on the left leg and rebound damping
and the adjustment on the right leg – i.e. all adjustments are made at the top together with the spring preload!
The cartridge kit system fits bolt on in most standard hyper sport front forks.
Part number
FGK 226
Type Code
30mm Cartridge Kit R&T
Technical data
Length: | 117 mm |
---|---|
Stroke: | 120 mm |
Position: | front |
Spring series: | 08790-Serie |
Notes
For Showa Front Forks.
Springs are not part of the kit and have to be ordered seperately. It is recommended to contact an authorised ÖHLINS Service Center for installation.
Fits for vehicles
Honda CBR600RR (2013 – 2016)
- Teilegutachten (Germany)
Honda CBR600RR (2017 – 2018)
- Without "Teilegutachten" (Germany)
Download
- Mounting Instructions FGK 226 English (1.191,5 KB)
- Owner´s Manual 30mm Cartridge Kit Road & Track English (1.996,0 KB)
- Mounting Instructions FGK 226 German (865,1 KB)
- Owner´s Manual 30mm Cartridge Kit Road & Track German (2.541,2 KB)
Note: (Springs Sold Separately Use Springs Series 08790-)
NIX 30 Cartridge Kit FGK 227
Our 30 mm front fork cartridge kit is based on experience gained from international Supersport and Superstock championships. It doesn’t matter if you are heading for a national road racing title or if you are taking your bike to the local race track. The cartridge kit will give you loads of performance, stable damping characteristics and fantastic comfort.
The kit has a unique design with compression damping and the adjustment on the left leg and rebound damping
and the adjustment on the right leg – i.e. all adjustments are made at the top together with the spring preload!
The cartridge kit system fits bolt on in most standard hyper sport front forks.
Part number
FGK 227
Type Code
30mm Cartridge Kit R&T
Technical data
Position: | front |
---|---|
Spring series: | 08790-Serie |
Notes
For the Showa OEM front fork. It is recommended to contact an authorised ÖHLINS Service Center for installation.
Fits for vehicles
Kawasaki Ninja ZX-6R 636 (2013 – 2016)
- Teilegutachten (Germany)
Kawasaki Ninja ZX-6R 636 (2017 – 2019)
- Without "Teilegutachten" (Germany)
Download
- Mounting Instructions FGK 227 English (849,4 KB)
- Owner´s Manual 30mm Cartridge Kit Road & Track English (1.996,0 KB)
- Mounting Instructions FGK 227 German (921,3 KB)
- Owner´s Manual 30mm Cartridge Kit Road & Track German (2.541,2 KB)
Note: (Springs Sold Separately Use Springs Series 08790-)
NIX 30 Cartridge Kit FGK 229
Our 30 mm front fork cartridge kit is based on experience gained from international Supersport and Superstock championships. It doesn’t matter if you are heading for a national road racing title or if you are taking your bike to the local race track. The cartridge kit will give you loads of performance, stable damping characteristics and fantastic comfort.
The kit has a unique design with compression damping and the adjustment on the left leg and rebound damping
and the adjustment on the right leg – i.e. all adjustments are made at the top together with the spring preload!
The cartridge kit system fits bolt on in most standard hyper sport front forks.
Part number
FGK 229
Type Code
30mm Cartridge Kit R&T
Technical data
Stroke: | 120 mm |
---|---|
Position: | front |
Spring series: | 08790-Serie |
Notes
It is recommended to contact an authorised ÖHLINS Service Center for installation.
Fits for vehicles
Ducati 899 Panigale (2014 – 2015)
- Teilegutachten (Germany)
Ducati 959 Panigale (2016 – 2019)
- "ABE" in preparation (Germany)
Ducati Panigale V2 (2020 – )
- "ABE" in preparation (Germany)
Ducati Panigale V4 (2018 – 2020)
- "ABE" in preparation (Germany)
Download
- Mounting Instructions FGK 229 English (1.078,1 KB)
- Owner´s Manual 30mm Cartridge Kit Road & Track English (1.996,0 KB)
- Mounting Instructions FGK 229 German (1.372,8 KB)
- Owner´s Manual 30mm Cartridge Kit Road & Track German (2.541,2 KB)
Note: (Springs Sold Separately Use Springs Series 08790-)
NIX 30 Cartridge Kit FGK 234
Our 30 mm front fork cartridge kit is based on experience gained from international Supersport and Superstock championships. It doesn’t matter if you are heading for a national road racing title or if you are taking your bike to the local race track. The cartridge kit will give you loads of performance, stable damping characteristics and fantastic comfort.
The kit has a unique design with compression damping and the adjustment on the left leg and rebound damping
and the adjustment on the right leg – i.e. all adjustments are made at the top together with the spring preload!
The cartridge kit system fits bolt on in most standard hyper sport front forks.
Part number
FGK 234
Type Code
30mm Cartridge Kit R&T
Technical data
Position: | front |
---|---|
Spring series: | 08790-Serie |
Packaging unit: | pair |
Notes
Will only fit for Yamaha YZF R1M with ÖHLINS front fork. Electronically controlled damping function will be deactivated! It is recommended to contact an authorised ÖHLINS Service Center for installation.
Fits for vehicles
Yamaha YZF-R1M (2015 – 2019)
- "ABE" in preparation (Germany)
Download
- Mounting Instructions FGK 234 English (219,6 KB)
- Owner´s Manual 30mm Cartridge Kit Road & Track English (1.996,0 KB)
- Mounting Instructions FGK 234 German (1.028,7 KB)
- Owner´s Manual 30mm Cartridge Kit Road & Track German (2.541,2 KB)
Note: (Springs Sold Separately Use Springs Series 08790-)
NIX 30 Cartridge Kit FGK 235
Our 30 mm front fork cartridge kit is based on experience gained from international Supersport and Superstock championships. It doesn’t matter if you are heading for a national road racing title or if you are taking your bike to the local race track. The cartridge kit will give you loads of performance, stable damping characteristics and fantastic comfort.
The kit has a unique design with compression damping and the adjustment on the left leg and rebound damping
and the adjustment on the right leg – i.e. all adjustments are made at the top together with the spring preload!
The cartridge kit system fits bolt on in most standard hyper sport front forks.
Part number
FGK 235
Technical data
Spring series: | 08790-Serie |
---|---|
Recommended oil: | 01309 |
Packaging unit: | pair |
Notes
Front fork springs needs to be ordered separately with order no 08790-xx (xx=code for spring rate).
It is recommended to contact an authorised ÖHLINS Service Center for installation.
Fits for vehicles
Yamaha MT-10 (2016 – 2019)
- Teilegutachten (Germany)
- "ABE" in preparation (Germany)
Yamaha YZF-R1 (2015 – 2016)
- Teilegutachten (Germany)
- "ABE" in preparation (Germany)
Yamaha YZF-R1 (2017 – 2019)
- "ABE" in preparation (Germany)
Yamaha YZF-R6 (2017 – 2019)
- "ABE" in preparation (Germany)
Download
- Mounting Instructions FGK 235 English (827,0 KB)
- Owner´s Manual 30mm Cartridge Kit Road & Track English (1.996,0 KB)
- Mounting Instructions FGK 235 German (1.193,8 KB)
- Owner´s Manual 30mm Cartridge Kit Road & Track German (2.541,2 KB)
Note: (Springs Sold Separately Use Springs Series 08790-)
NIX 30 Cartridge Kit FGK 236
Our 30 mm front fork cartridge kit is based on experience gained from international Supersport and Superstock championships. It doesn’t matter if you are heading for a national road racing title or if you are taking your bike to the local race track. The cartridge kit will give you loads of performance, stable damping characteristics and fantastic comfort.
The kit has a unique design with compression damping and the adjustment on the left leg and rebound damping
and the adjustment on the right leg – i.e. all adjustments are made at the top together with the spring preload!
The cartridge kit system fits bolt on in most standard hyper sport front forks.
Part number
FGK 236
Technical data
Stroke: | 140 mm |
---|---|
Position: | front |
Spring series: | 08423-Serie |
Recommended oil: | 01309 |
Oil level mm: | 130 |
Packaging unit: | pair |
Notes
Only fits the Sachs OE fork, not the OE Marzocchi fork! Not suitable for ESA equipped bikes.
It is recommended to contact an ÖHLINS Service Center for installation.
Fits for vehicles
BMW R 1200 R (2015 – 2016)
- "Teilegutachten" in preparation (Germany)
BMW R 1200 R (2017 – 2018)
- ABE (Germany)
BMW R 1200 RS (2015 – 2016)
- "Teilegutachten" in preparation (Germany)
BMW R 1200 RS (2017 – 2018)
- ABE (Germany)
Download
- Mounting Instructions FGK 236 English (745,8 KB)
- Owner´s Manual 30mm Cartridge Kit Road & Track English (1.996,0 KB)
- Mounting Instructions FGK 236 German (1.102,2 KB)
- Owner´s Manual 30mm Cartridge Kit Road & Track German (2.541,2 KB)
Features
Features
For 85cc bikes, a new cartridge kit is now available based on the TTX22 cartridge kit for the bigger bikes. In 2015 the new 85cc cartridge kit will be available for all major 85cc models. These kits are designed based on the Öhlins TTX22 cartridge kit for the bigger bikes and share a lot of features with them and the experience they have from top level racing around the world. As such it’s one of the most powerful cartridge kits available for 85cc bikes. This kit has been designed to rise very low above the fork leg ends, thus allowing the forks to be mounted far up in the triple clamps with a small clearance to the handlebars. This allows for lower bikes for the smaller riders in the class. Click adjusters and air breather are easily reachable as they are angled out from underneath the handlebar. The kit is also designed to achieve a quick and continuous response in the damping which directly slows down upcoming motions without harshness. It has a very reliable and constant damping characteristic in every stroke and during the whole race so the behavior is predictable and consistent. Note! This kit requires springs and oil which are sold separately.
For 85cc bikes, a new cartridge kit is now available based on the TTX22 cartridge kit for the bigger bikes. In 2015 the new 85cc cartridge kit will be available for all major 85cc models. These kits are designed based on the Öhlins TTX22 cartridge kit for the bigger bikes and share a lot of features with them and the experience they have from top level racing around the world. As such it’s one of the most powerful cartridge kits available for 85cc bikes. This kit has been designed to rise very low above the fork leg ends, thus allowing the forks to be mounted far up in the triple clamps with a small clearance to the handlebars. This allows for lower bikes for the smaller riders in the class. Click adjusters and air breather are easily reachable as they are angled out from underneath the handlebar. The kit is also designed to achieve a quick and continuous response in the damping which directly slows down upcoming motions without harshness. It has a very reliable and constant damping characteristic in every stroke and during the whole race so the behavior is predictable and consistent. Note! This kit requires springs and oil which are sold separately.
If you want to keep your front fork legs but still upgrade to Öhlins TTX, just pull out the standard inserts and pop in this powerful TTX22 cartridge kit from Öhlins R&D. The same kit that is fitted in the Öhlins Front Fork is based on the Öhlins TTX-technology is also available as a stand-alone cartridge kit for all major models. The TTX technology brings a positive pressure balance in the system, thanks to the twin tube technology. The gas pressurized dividing piston inside pushes the hydraulic fluid back into the low pressure side and the end result is better improved performance and no more cavitation. The kit is lighter thanks to an 8 mm steel hollow shaft and the main piston diameter is 22 mm. All other details are made in aluminum. Settings are constantly improved and a new one-way rebound valve was recently introduced which improves the performance and gives better front wheel control. Available for most major models on the market. Note! This kit requires springs and oil which are sold separately.
Öhlins FKA Cartridge Kit Adventure FKA 102
Based on the well proven NIX technology from our Road & Track product line, Öhlins developed the FKA cartridge kits for Adventure Bikes improving these in terms of comfort and overall performance.
Thanks to the FKA cartridge kits from Öhlins the bike now has a fully adjustable front end. Rebound damping is on one leg and compression in the other leg, with adjustable spring preload in both legs. Different springs are available for riders individual demands as well as an effective hydraulic stop inside the kit to prevent bottoming.
Front fork springs and oil need to be ordered separately. Spring rate recommendations can be found in the mounting instruction.
Part number
FKA 102
Type Code
30mm Cartridge Kit FKA
![Piston diameter Piston diameter](https://www.ohlins.eu/images/icon-diameter.png)
30
Piston diameter: 30 mm
Technical data
Length: | 813 mm |
---|---|
Stroke: | 170 mm |
Position: | front |
Spring series: | 08415-Serie |
Notes
We recommended to contact an authorized ÖHLINS dealer or Service Center for installation.
Fits for vehicles
Triumph Tiger 800 (2011 – 2014)
- ABE (Germany)
Download
- Mounting Instruction Öhlins Motorcycle FKA 102 (English) (1.121,8 KB)
- Owner's Manual Öhlins Motorcycle FKA 1xx Cartridge Kit Adventure (English) (1.524,2 KB)
- Mounting Instruction Öhlins Motorcycle FKA 102 (German) (1.076,5 KB)
- Owner's Manual Öhlins Motorcycle FKA 1xx Cartridge Kit Adventure (German) (3.145,3 KB)
Recommendations
Öhlins FKA Cartridge Kit Adventure FKA 106
Based on the well proven NIX technology from our Road & Track product line, Öhlins developed the FKA cartridge kits for Adventure Bikes improving these in terms of comfort and overall performance.
Thanks to the FKA cartridge kits from Öhlins the bike now has a fully adjustable front end. Rebound damping is on one leg and compression in the other leg, with adjustable spring preload in both legs. Different springs are available for riders individual demands as well as an effective hydraulic stop inside the kit to prevent bottoming.
Front fork springs and oil need to be ordered separately. Spring rate recommendations can be found in the mounting instruction.
Part number
FKA 106
Technical data
Length: | 872 mm |
---|---|
Stroke: | 190 mm |
Position: | front |
Spring series: | 08424-serie |
Recommended oil: | 01309-01 |
Packaging unit: | pair |
Notes
We recommended to contact an authorized ÖHLINS dealer or Service Center for installation.
Fits for vehicles
Yamaha XT1200Z Super Ténéré (2010 – 2020)
- ABE (Germany)
- Does not fit XT 1200 ZE
Download
- Mounting Instruction Öhlins Motorcycle FKA 106 (English) (749,3 KB)
- Owner's Manual Öhlins Motorcycle FKA 1xx Cartridge Kit Adventure (English) (1.524,2 KB)
- Mounting Instruction Öhlins Motorcycle FKA 106 (German) (846,2 KB)
- Owner's Manual Öhlins Motorcycle FKA 1xx Cartridge Kit Adventure (German) (3.145,3 KB)
Recommendations
Öhlins FKA Cartridge Kit Adventure FKA 115 for Aprilia Tuareg 660 (Kayaba) 2022
Based on the well proven NIX technology from our Road & Track product line, Öhlins developed the FKA cartridge kits for Adventure Bikes improving these in terms of comfort and overall performance.
Thanks to the FKA cartridge kits from Öhlins the bike now has a fully adjustable front end. Rebound damping is on one leg and compression in the other leg, with adjustable spring preload in both legs. Different springs are available for riders individual demands as well as an effective hydraulic stop inside the kit to prevent bottoming.
Front fork springs and oil need to be ordered separately. Spring rate recommendations can be found in the mounting instruction.
Part number
FKA 115
Technical data
Length: | 936 mm |
---|---|
Stroke: | 240 mm |
Position: | front |
Spring series: | 08438-series |
Recommended oil: | 01309-01 |
Oil level mm: | 120 |
Oil volume: | 500 |
Packaging unit: | pair |
Notes
We recommended to contact an authorized ÖHLINS dealer or Service Center for installation.
Fits for vehicles
Aprilia Tuareg 660 (2022 – )
- "ABE" in preparation (Germany)
Öhlins FKC Cartridge Kit Custom & Heritage FKC 101
The Öhlins FKC Cartridge Kit introduces Öhlins advanced suspension technology to the front forks of the popular line of Harley Davidson FLH/FLT Touring Baggers. Built on the race proven Öhlins NIX technology, the front fork cartridge damping system vastly improves performance, comfort and vehicle control for the Harley-Davidson front forks.
To maximize the damping performance available in confines of a fork leg, compression and rebound damping are separated between the legs. Also, we did away with the hassle of external adjusters. Just install and enjoy! Of course, optional spring rates are available for individual rider weights, preferences and use of the bike.
The Öhlins cartridge system fits into the original front fork, springs have to be ordered individually. Please follow our recommendations regarding spring rates and oil in relation to rider's weight and preference listed in the specific cartridge kit's mounting instruction.
Part number
FKC 101
Type Code
25mm Cartridge Kit R&T
Technical data
Stroke: | 117 mm |
---|---|
Position: | front |
Spring series: | 08419-Serie |
Recommended oil: | 01309 |
Oil level mm: | 80 |
Packaging unit: | pair |
Notes
The front fork springs needs to be ordered separately with part no 08419-10 (rate 10 N/mm)
For lowering this Cartridge kit you need to order a separate kit with part no 08865-01. Lowering will be ca. 25mm. Springs with 13N/mm rate are included in the package.
It is recommended to contact an authorised ÖHLINS Service Center for installation.
Fits for vehicles
Harley-Davidson Electra Glide Classic FI FLHTCI (FL1) (1999 – 2006)
- ABE (Germany)
Harley-Davidson Electra Glide Classic FLHTC (FL1) (1999 – 2006)
- "ABE" in preparation (Germany)
Harley-Davidson Electra Glide Classic FLHTC (FL2) (2007 – 2013)
- Teilegutachten (Germany)
Harley-Davidson Electra Glide FLHT (FL1) (1999 – 2006)
- ABE (Germany)
Harley-Davidson Electra Glide FLHT (FL2) (2007 – 2013)
- ABE (Germany)
Harley-Davidson Electra Glide FLHT (FLT) (1997 – 1999)
- ABE (Germany)
Harley-Davidson Road Glide Custom FLTRX (FL2) (2011 – 2013)
- ABE (Germany)
Harley-Davidson Road Glide FLTR (FL1) (1999 – 2006)
- ABE (Germany)
Harley-Davidson Road Glide FLTR (FL2) (2007 – 2013)
- ABE (Germany)
Harley-Davidson Road Glide Ultra FLTRU (FL2) (2011 – 2013)
- ABE (Germany)
Harley-Davidson Road King Classic FLHRC (FL1) (1999 – 2006)
- "ABE" in preparation (Germany)
Harley-Davidson Road King Classic FLHRC (FL2) (2007 – 2013)
- ABE (Germany)
Harley-Davidson Road King Classic FLHRC (FLT) (1997 – 1999)
- ABE (Germany)
Harley-Davidson Road King Classic FLHRCI (FL1) (1999 – 2006)
- ABE (Germany)
Harley-Davidson Road King Custom FLHRS (FL1) (2004 – 2008)
- ABE (Germany)
Harley-Davidson Road King FLHR (FL1) (1999 – 2006)
- ABE (Germany)
Harley-Davidson Road King FLHR (FL2) (2007 – 2013)
- ABE (Germany)
Harley-Davidson Road King FLHR (FLT) (1997 – 1999)
- ABE (Germany)
Harley-Davidson Street Glide FLHX (FL1) (2006)
- ABE (Germany)
Harley-Davidson Street Glide FLHX (FL2) (2007 – 2013)
- Teilegutachten (Germany)
Harley-Davidson Ultra Glide Classic FI FLHTCUI (FL1) (1999 – 2006)
- ABE (Germany)
Download
Öhlins FKC Cartridge Kit Custom & Heritage FKC 102
The Öhlins FKC Cartridge Kit introduces Öhlins advanced suspension technology to the front forks of the popular line of Harley Davidson FLH/FLT Touring Baggers. Built on the race proven Öhlins NIX technology, the front fork cartridge damping system vastly improves performance, comfort and vehicle control for the Harley-Davidson front forks.
To maximize the damping performance available in confines of a fork leg, compression and rebound damping are separated between the legs. Also, we did away with the hassle of external adjusters. Just install and enjoy! Of course, optional spring rates are available for individual rider weights, preferences and use of the bike.
The Öhlins cartridge system fits into the original front fork, springs have to be ordered individually. Please follow our recommendations regarding spring rates and oil in relation to rider's weight and preference listed in the specific cartridge kit's mounting instruction.
Part number
FKC 102
Type Code
25mm Cartridge Kit R&T
Technical data
Position: | front |
---|---|
Spring series: | 08866-Serie |
Recommended oil: | 01309-01 |
Oil level mm: | 80 mm |
Packaging unit: | pair |
Notes
Will not fit Road King CVO 2014 and Electra Glide Low 2016!!
The front fork springs needs to be ordered separately with part no 08866-01 (rate 10 N/mm) or 08866-02 (12 N/mm).
For lowering this Cartridge kit you need to order a separate kit with part no 08866-03. Lowering will be ca. 25mm. Springs with 13 N/mm rate are included in the package.
It is recommended to contact an authorised ÖHLINS Service Center for installation.
Fits for vehicles
Harley-Davidson Electra Glide Ultra Limited FLHTK (FL3) (2014 – 2016)
- Without "Teilegutachten" (Germany)
- Does not fit the Ultra Limited Low (FLHTKL) 2014-2016.
Harley-Davidson Road Glide Custom CVO FLTRXSE (FL3) (2014 – 2016)
- ABE (Germany)
Harley-Davidson Road Glide Custom FLTRX (FL3) (2014 – 2016)
- ABE (Germany)
Harley-Davidson Road Glide Special FLTRXS (FL3) (2014 – 2016)
- ABE (Germany)
Harley-Davidson Road Glide Ultra CVO FLTRUSE (FL3) (2014 – 2016)
- ABE (Germany)
Harley-Davidson Road Glide Ultra FLTRU (FL3) (2014 – 2016)
- ABE (Germany)
Harley-Davidson Road King Classic FLHRC (FL3) (2014 – 2016)
- ABE (Germany)
Harley-Davidson Road King FLHR (FL3) (2014 – 2016)
- ABE (Germany)
Harley-Davidson Street Glide CVO FLHXSE (FL3) (2014 – 2016)
- ABE (Germany)
Harley-Davidson Street Glide FLHX(S) (FL3) (2014 – 2016)
- ABE (Germany)
Harley-Davidson Ultra Glide Classic FLHTCU (FL3) (2014 – 2016)
- ABE (Germany)
Download
Öhlins FKA Cartridge Kit Adventure FKA 101
Based on the well proven NIX technology from our Road & Track product line, Öhlins developed the FKA cartridge kits for Adventure Bikes improving these in terms of comfort and overall performance.
Thanks to the FKA cartridge kits from Öhlins the bike now has a fully adjustable front end. Rebound damping is on one leg and compression in the other leg, with adjustable spring preload in both legs. Different springs are available for riders individual demands as well as an effective hydraulic stop inside the kit to prevent bottoming.
Front fork springs and oil need to be ordered separately. Spring rate recommendations can be found in the mounting instruction.
Part number
FKA 101
Type Code
30mm Cartridge Kit FKA
![Piston diameter Piston diameter](https://www.ohlins.eu/images/icon-diameter.png)
30
Piston diameter: 30 mm
Technical data
Length: | 910 mm |
---|---|
Stroke: | 230 mm |
Position: | front |
Spring series: | 08767-Serie |
Notes
Fits the Marzocchi OEM Front Fork. We recommended to contact an authorized ÖHLINS dealer or Service Center for installation.
Fits for vehicles
BMW F 800 GS (2008 – 2012)
- ABE (Germany)
Download
- Mounting Instruction Öhlins Motorcycle FKA 101 (English) (1.120,5 KB)
- Owner's Manual Öhlins Motorcycle FKA 1xx Cartridge Kit Adventure (English) (1.524,2 KB)
- Mounting Instruction Öhlins Motorcycle FKA 101 (German) (1.076,2 KB)
- Owner's Manual Öhlins Motorcycle FKA 1xx Cartridge Kit Adventure (German) (3.145,3 KB)
Recommendations
FKR Cartridge Kit Racing (TTX 25) FKR 102
The racing inspired FKR cartridge kit has technology derived straight from the Moto3, Moto 2 and World Superbike championships developed by our engineers in Sweden and is designed for high end racing.
The FKR Cartridge kit features a spring pressurized system, compared to the old gas pressurized system, the spring pressure offers a more simplistic and user friendly design that also accounts for easier maintenance. But there are more advantages of a spring pressurized system. There is no risk of gas leakage, it also gives a more consistent performance curve and allows for a more compact design. With the Öhlins TTX technology, a new designed piston and an 8mm piston shaft we reduce the pressure build-up and create a faster damping response. That gives a “linear” style of damping characteristics which create more tuning options and also increases grip and bump absorption properties while improving chassis stability.
Part number
FKR 102
Type Code
TTX25 Cartridge Kit FKR
Technical data
Spring series: | 04744-Serie |
---|---|
Packaging included: | springs 9.5, 10.0, 10.5N/mm |
Notes
Racing only! Kit comes with 3 different spring rates: 9.5, 10 & 10.5N/mm.
Fits models with Kayaba OEM fork.
It is recommended to contact an authorised ÖHLINS Service Center for installation.
Fits for vehicles
Yamaha YZF-R1 (2015 – 2020)
- Without "Teilegutachten" (Germany)
- Racing product, not for use on public roads
Yamaha YZF-R6 (2017 – 2020)
- Without "Teilegutachten" (Germany)
- Racing product, not for use on public roads
Download
- Mounting Instructions FKR 102 English (696,2 KB)
- Owner´s Manual TTX GP shock absorber Road & Track (English) (971,6 KB)
- Mounting Instructions TR 469 German (728,0 KB)
- Mounting Instructions FKR 102 German (732,8 KB)
- Owner´s Manual TTX GP shock absorber Road & Track (German) (1.098,1 KB)
- FKR 100 Öhlins Product News (German) (1.000,6 KB)
FKR Cartridge Kit Racing (TTX 25) FKR 103
The racing inspired FKR cartridge kit has technology derived straight from the Moto3, Moto 2 and World Superbike championships developed by our engineers in Sweden and is designed for high end racing.
The FKR Cartridge kit features a spring pressurized system, compared to the old gas pressurized system, the spring pressure offers a more simplistic and user friendly design that also accounts for easier maintenance. But there are more advantages of a spring pressurized system. There is no risk of gas leakage, it also gives a more consistent performance curve and allows for a more compact design. With the Öhlins TTX technology, a new designed piston and an 8mm piston shaft we reduce the pressure build-up and create a faster damping response. That gives a “linear” style of damping characteristics which create more tuning options and also increases grip and bump absorption properties while improving chassis stability.
Part number
FKR 103
Type Code
TTX25 Cartridge Kit FKR
Technical data
Spring series: | 04744-Serie |
---|---|
Packaging included: | springs 9.5, 10.0, 10.5N/mm |
Notes
Fits models with Öhlins fork FL 912! It is recommended to contact an authorised ÖHLINS Service Center for installation.
Fits for vehicles
Yamaha YZF-R1M (2015 – 2019)
- Without "Teilegutachten" (Germany)
- Racing product, not for use on public roads
- Fits OEM Öhlins FL 912 fork
Download
- Mounting Instructions FKR 103 English (553,4 KB)
- Owner´s Manual TTX GP shock absorber Road & Track (English) (971,6 KB)
- Mounting Instructions FKR 103 German (596,6 KB)
- Mounting Instructions TR 469 German (728,0 KB)
- Owner´s Manual TTX GP shock absorber Road & Track (German) (1.098,1 KB)
- FKR 100 Öhlins Product News (German) (1.000,6 KB)
FKR Cartridge Kit Racing (TTX 25) FKR 104
The racing inspired FKR cartridge kit has technology derived straight from the Moto3, Moto 2 and World Superbike championships developed by our engineers in Sweden and is designed for high end racing.
The FKR Cartridge kit features a spring pressurized system, compared to the old gas pressurized system, the spring pressure offers a more simplistic and user friendly design that also accounts for easier maintenance. But there are more advantages of a spring pressurized system. There is no risk of gas leakage, it also gives a more consistent performance curve and allows for a more compact design. With the Öhlins TTX technology, a new designed piston and an 8mm piston shaft we reduce the pressure build-up and create a faster damping response. That gives a “linear” style of damping characteristics which create more tuning options and also increases grip and bump absorption properties while improving chassis stability.
Part number
FKR 104
Type Code
TTX25 Cartridge Kit FKR
Technical data
Spring series: | 04744-Serie |
---|---|
Packaging included: | springs 9.0, 9.5, 10.0 |
Notes
It is recommended to contact an authorised ÖHLINS Service Center for installation.
Fits for vehicles
BMW S 1000 RR (2008 – 2018)
- Racing product, not for use on public roads
BMW S 1000 RR HP4 (2013 – 2014)
- Racing product, not for use on public roads
Download
- Mounting Instructions FKR 104 English (851,3 KB)
- Owner´s Manual TTX GP shock absorber Road & Track (English) (971,6 KB)
- Mounting Instructions TR 469 German (728,0 KB)
- Mounting Instructions FKR 104 German (832,0 KB)
- Owner´s Manual TTX GP shock absorber Road & Track (German) (1.098,1 KB)
- FKR 100 Öhlins Product News (German) (1.000,6 KB)
FKR Cartridge Kit Racing (TTX 25) FKR 105
Comes with 3 different spring rates: 9.5 ,10 & 10.5N/mm.
The racing inspired FKR cartridge kit has technology derived straight from the Moto3, Moto 2 and World Superbike championships developed by our engineers in Sweden and is designed for high end racing.
The FKR Cartridge kit features a spring pressurized system, compared to the old gas pressurized system, the spring pressure offers a more simplistic and user friendly design that also accounts for easier maintenance. But there are more advantages of a spring pressurized system. There is no risk of gas leakage, it also gives a more consistent performance curve and allows for a more compact design. With the Öhlins TTX technology, a new designed piston and an 8mm piston shaft we reduce the pressure build-up and create a faster damping response. That gives a “linear” style of damping characteristics which create more tuning options and also increases grip and bump absorption properties while improving chassis stability.
Part number
FKR 105
Type Code
TTX25 Cartridge Kit FKR
Technical data
Spring series: | 04744-Serie |
---|---|
Packaging included: | springs 9.5, 10.0 % 10.5N/mm |
Notes
Not for 2018/19 SE (Semi-active) Version.
Comes with 3 different spring rates: 9.5 ,10 & 10.5N/mm.
It is recommended to contact an authorised ÖHLINS Service Center for installation.
Fits for vehicles
Suzuki GSX-R 1000 R (2017 – 2020)
- Without "Teilegutachten" (Germany)
- Racing product, not for use on public roads
- For GSX-R 1000R with Showa BFF fork.
Kawasaki Ninja ZX-10R (2016 – 2019)
- Without "Teilegutachten" (Germany)
- Racing product, not for use on public roads
- Not for 2018 SE (Semi-active) Version.
Kawasaki Ninja ZX-10RR (2018 – 2019)
- Without "Teilegutachten" (Germany)
- Racing product, not for use on public roads
Download
- Mounting Instructions FKR 105 English (655,7 KB)
- Owner´s Manual TTX GP shock absorber Road & Track (English) (971,6 KB)
- Mounting Instructions TR 469 German (728,0 KB)
- Mounting Instructions FKR 105 German (692,1 KB)
- Owner´s Manual TTX GP shock absorber Road & Track (German) (1.098,1 KB)
- FKR 100 Öhlins Product News (German) (1.000,6 KB)
FKR Cartridge Kit Racing (TTX 25) FKR 106
The racing inspired FKR cartridge kit has technology derived straight from the Moto3, Moto 2 and World Superbike championships developed by our engineers in Sweden and is designed for high end racing.
The FKR Cartridge kit features a spring pressurized system, compared to the old gas pressurized system, the spring pressure offers a more simplistic and user friendly design that also accounts for easier maintenance. But there are more advantages of a spring pressurized system. There is no risk of gas leakage, it also gives a more consistent performance curve and allows for a more compact design. With the Öhlins TTX technology, a new designed piston and an 8mm piston shaft we reduce the pressure build-up and create a faster damping response. That gives a “linear” style of damping characteristics which create more tuning options and also increases grip and bump absorption properties while improving chassis stability.
Part number
FKR 106
Type Code
TTX25 Cartridge Kit FKR
Technical data
Spring series: | 04744-Serie |
---|---|
Packaging included: | springs 9.0, 9.5, 10.0 |
Notes
Fits models with Kayaba OEM fork!
It is recommended to contact an authorised ÖHLINS Service Center for installation.
Fits for vehicles
Yamaha YZF-R6 (2016)
- Racing product, not for use on public roads
Download
- Mounting Instructions FKR 106 English (633,5 KB)
- Owner´s Manual TTX GP shock absorber Road & Track (English) (971,6 KB)
- Mounting Instructions TR 469 German (728,0 KB)
- Mounting Instructions FKR 106 German (664,9 KB)
- Owner´s Manual TTX GP shock absorber Road & Track (German) (1.098,1 KB)
- FKR 100 Öhlins Product News (German) (1.000,6 KB)
FKR Cartridge Kit Racing (TTX 25) FKR 107
The racing inspired FKR cartridge kit has technology derived straight from the Moto3, Moto 2 and World Superbike championships developed by our engineers in Sweden and is designed for high end racing.
The FKR Cartridge kit features a spring pressurized system, compared to the old gas pressurized system, the spring pressure offers a more simplistic and user friendly design that also accounts for easier maintenance. But there are more advantages of a spring pressurized system. There is no risk of gas leakage, it also gives a more consistent performance curve and allows for a more compact design. With the Öhlins TTX technology, a new designed piston and an 8mm piston shaft we reduce the pressure build-up and create a faster damping response. That gives a “linear” style of damping characteristics which create more tuning options and also increases grip and bump absorption properties while improving chassis stability.
Part number
FKR 107
Type Code
TTX25 Cartridge Kit FKR
Technical data
Spring series: | 04744-Serie |
---|---|
Packaging included: | springs 9.0, 9.5, 10.0 |
Notes
Comes with 3 different spring rates: 9, 9.5 & 10N/mm.
It is recommended to contact an authorised ÖHLINS Service Center for installation.
Fits for vehicles
Kawasaki Ninja ZX-6R (2009 – 2016)
- Racing product, not for use on public roads
Download
- Mounting Instructions FKR 107 English (704,9 KB)
- Owner´s Manual TTX GP shock absorber Road & Track (English) (971,6 KB)
- Mounting Instructions TR 469 German (728,0 KB)
- Mounting Instructions FKR 107 German (685,6 KB)
- Owner´s Manual TTX GP shock absorber Road & Track (German) (1.098,1 KB)
- FKR 100 Öhlins Product News (German) (1.000,6 KB)
TTX 25 Cartridge Kit (FKR 100) FKR 108
The racing inspired FKR cartridge kit has technology derived straight from the Moto3, Moto 2 and World Superbike championships developed by our engineers in Sweden and is designed for high end racing.
The FKR Cartridge kit features a spring pressurized system, compared to the old gas pressurized system, the spring pressure offers a more simplistic and user friendly design that also accounts for easier maintenance. But there are more advantages of a spring pressurized system. There is no risk of gas leakage, it also gives a more consistent performance curve and allows for a more compact design. With the Öhlins TTX technology, a new designed piston and an 8mm piston shaft we reduce the pressure build-up and create a faster damping response. That gives a “linear” style of damping characteristics which create more tuning options and also increases grip and bump absorption properties while improving chassis stability.
Part number
FKR 108
Type Code
TTX25 Cartridge Kit FKR
Technical data
Spring series: | 04744-Serie |
---|---|
Packaging included: | springs 9.0, 9.5, 10.0 |
Notes
Fits models with Öhlins fork FG 925! Comes with 3 different spring rates: 9.5 ,10.0 & 10.5 N/mm.
It is recommended to contact an authorised ÖHLINS Service Center for installation.
Fits for vehicles
Ducati 1199 Panigale R (2012 – 2014)
- Without "Teilegutachten" (Germany)
- Racing product, not for use on public roads
- Fits models with Öhlins fork FG 925!
Ducati 1199 Panigale S (2012 – 2014)
- Without "Teilegutachten" (Germany)
- Racing product, not for use on public roads
Ducati 1299 Panigale S (2015 – 2017)
- Without "Teilegutachten" (Germany)
- Racing product, not for use on public roads
- Fits models with Öhlins fork FG 925!
Ducati Panigale V4 S (2018 – 2020)
- Without "Teilegutachten" (Germany)
- Racing product, not for use on public roads
- Fits only models with Öhlins fork!
Ducati Panigale V4 S Corse (2019 – 2020)
- Without "Teilegutachten" (Germany)
- Racing product, not for use on public roads
- *For Racing use only, may cause fault code in display*
Ducati Panigale V4 Speciale (2018 – 2020)
- Without "Teilegutachten" (Germany)
- Racing product, not for use on public roads
Download
- Mounting Instruction Öhlins Motorcycle FKR 108 (English) (553,4 KB)
- Owner´s Manual Öhlins Motorcycle FKR 100 Cartridge Kit (English) (971,6 KB)
- Product News Öhlins Motorcycle FKR 100 Series (English) (728,0 KB)
- Mounting Instruction Öhlins Motorcycle FKR 108 (German) (611,3 KB)
- Owner´s Manual Öhlins Motorcycle FKR 100 Serie (German) (1.098,1 KB)
- Product News Öhlins Motorcycle FKR 100 Series (German) (1.000,6 KB)
TTX 25 Cartridge Kit (FKR 100) FKR 109
The racing inspired FKR cartridge kit has technology derived straight from the Moto3, Moto 2 and World Superbike championships developed by our engineers in Sweden and is designed for high end racing.
The FKR Cartridge kit features a spring pressurized system, compared to the old gas pressurized system, the spring pressure offers a more simplistic and user friendly design that also accounts for easier maintenance. But there are more advantages of a spring pressurized system. There is no risk of gas leakage, it also gives a more consistent performance curve and allows for a more compact design. With the Öhlins TTX technology, a new designed piston and an 8mm piston shaft we reduce the pressure build-up and create a faster damping response. That gives a “linear” style of damping characteristics which create more tuning options and also increases grip and bump absorption properties while improving chassis stability.
Part number
FKR 109
Type Code
TTX25 Cartridge Kit FKR
Technical data
Spring series: | 04744-Serie |
---|---|
Packaging included: | springs 9.0, 9.5, 10.0 |
Notes
Fits models with Öhlins fork FL 910 and FL 926.
Comes with 3 different spring rates: 9.5 ,10 & 10.5 N/mm.
It is recommended to contact an authorised ÖHLINS Service Center for installation.
Fits for vehicles
Honda CBR1000RR SP (2017 – 2019)
- Racing product, not for use on public roads
- Fits models with Öhlins fork FL 910 and FL 926.
Download
- Mounting Instruction Öhlins Motorcycle FKR 109 (English) (634,6 KB)
- Owner´s Manual Öhlins Motorcycle FKR 100 Cartridge Kit (English) (971,6 KB)
- Product News Öhlins Motorcycle FKR 100 Series (English) (728,0 KB)
- Mounting Instruction Öhlins Motorcycle FKR 109 (German) (670,0 KB)
- Owner´s Manual Öhlins Motorcycle FKR 100 Serie (German) (1.098,1 KB)
- Product News Öhlins Motorcycle FKR 100 Series (German) (1.000,6 KB)
TTX 25 Cartridge Kit (FKR 100) FKR 110
The racing inspired FKR cartridge kit has technology derived straight from the Moto3, Moto 2 and World Superbike championships developed by our engineers in Sweden and is designed for high end racing.
The FKR Cartridge kit features a spring pressurized system, compared to the old gas pressurized system, the spring pressure offers a more simplistic and user friendly design that also accounts for easier maintenance. But there are more advantages of a spring pressurized system. There is no risk of gas leakage, it also gives a more consistent performance curve and allows for a more compact design. With the Öhlins TTX technology, a new designed piston and an 8mm piston shaft we reduce the pressure build-up and create a faster damping response. That gives a “linear” style of damping characteristics which create more tuning options and also increases grip and bump absorption properties while improving chassis stability.
Part number
FKR 110
Type Code
TTX25 Cartridge Kit FKR
Technical data
Spring series: | 04744-Serie |
---|---|
Packaging included: | springs 9.0, 9.5, 10.0 |
Notes
It is recommended to contact an authorised ÖHLINS Service Center for installation.
Fits for vehicles
Honda CBR600RR (2013 – 2018)
- Without "Teilegutachten" (Germany)
- Racing product, not for use on public roads
Download
- Mounting Instruction Öhlins Motorcycle FKR 110 (English) (740,2 KB)
- Owner´s Manual Öhlins Motorcycle FKR 100 Cartridge Kit (English) (971,6 KB)
- Product News Öhlins Motorcycle FKR 100 Series (English) (728,0 KB)
- Owner´s Manual Öhlins Motorcycle FKR 100 Serie (German) (1.098,1 KB)
- Product News Öhlins Motorcycle FKR 100 Series (German) (1.000,6 KB)
FKR Cartridge Kit Racing (TTX 25) FKR 111
The racing inspired FKR cartridge kit has technology derived straight from the Moto3, Moto 2 and World Superbike championships developed by our engineers in Sweden and is designed for high end racing.
The FKR Cartridge kit features a spring pressurized system, compared to the old gas pressurized system, the spring pressure offers a more simplistic and user friendly design that also accounts for easier maintenance. But there are more advantages of a spring pressurized system. There is no risk of gas leakage, it also gives a more consistent performance curve and allows for a more compact design. With the Öhlins TTX technology, a new designed piston and an 8mm piston shaft we reduce the pressure build-up and create a faster damping response. That gives a “linear” style of damping characteristics which create more tuning options and also increases grip and bump absorption properties while improving chassis stability.
Part number
FKR 111
Type Code
TTX25 Cartridge Kit FKR
Technical data
Spring series: | 04744-Serie |
---|---|
Packaging included: | springs 9.0, 9.5, 10.0 |
Notes
It is recommended to contact an authorised ÖHLINS Service Center for installation.
Fits for vehicles
Kawasaki Ninja ZX-10R (2011 – 2015)
- Racing product, not for use on public roads
Download
- Mounting Instructions FKR 111 English (739,0 KB)
- Owner´s Manual TTX GP shock absorber Road & Track (English) (971,6 KB)
- Mounting Instructions TR 469 German (728,0 KB)
- Owner´s Manual TTX GP shock absorber Road & Track (German) (1.098,1 KB)
- FKR 100 Öhlins Product News (German) (1.000,6 KB)
FKR Cartridge Kit Racing (TTX 25) FKR 112
The racing inspired FKR cartridge kit has technology derived straight from the Moto3, Moto 2 and World Superbike championships developed by our engineers in Sweden and is designed for high end racing.
The FKR Cartridge kit features a spring pressurized system, compared to the old gas pressurized system, the spring pressure offers a more simplistic and user friendly design that also accounts for easier maintenance. But there are more advantages of a spring pressurized system. There is no risk of gas leakage, it also gives a more consistent performance curve and allows for a more compact design. With the Öhlins TTX technology, a new designed piston and an 8mm piston shaft we reduce the pressure build-up and create a faster damping response. That gives a “linear” style of damping characteristics which create more tuning options and also increases grip and bump absorption properties while improving chassis stability.
Part number
FKR 112
Type Code
TTX25 Cartridge Kit FKR
Technical data
Spring series: | 04744-Serie |
---|---|
Packaging included: | springs 9.0, 9.5, 10.0 |
Notes
It is recommended to contact an authorised ÖHLINS Service Center for installation.
Fits for vehicles
Yamaha YZF-R6 (2008 – 2015)
- Racing product, not for use on public roads
Download
- Mounting Instructions FKR 112 English (755,2 KB)
- Owner´s Manual TTX GP shock absorber Road & Track (English) (971,6 KB)
- Mounting Instructions TR 469 German (728,0 KB)
- Owner´s Manual TTX GP shock absorber Road & Track (German) (1.098,1 KB)
- FKR 100 Öhlins Product News (German) (1.000,6 KB)
TTX 25 Cartridge Kit (FKR 100) FKR 114
The racing inspired FKR cartridge kit has technology derived straight from the Moto3, Moto 2 and World Superbike championships developed by our engineers in Sweden and is designed for high end racing.
The FKR Cartridge kit features a spring pressurized system, compared to the old gas pressurized system, the spring pressure offers a more simplistic and user friendly design that also accounts for easier maintenance. But there are more advantages of a spring pressurized system. There is no risk of gas leakage, it also gives a more consistent performance curve and allows for a more compact design. With the Öhlins TTX technology, a new designed piston and an 8mm piston shaft we reduce the pressure build-up and create a faster damping response. That gives a “linear” style of damping characteristics which create more tuning options and also increases grip and bump absorption properties while improving chassis stability.
Comes with 3 different spring rates: 9, 9.5 & 10N/mm.
Part number
FKR 114
Type Code
TTX25 Cartridge Kit FKR
Technical data
Spring series: | 04744-Serie |
---|---|
Packaging included: | springs 9.0, 9.5, 10.0 |
Notes
Fits models with Öhlins fork FL 923!
Comes with 3 different spring rates: 9, 9.5 & 10N/mm.
It is recommended to contact an authorised ÖHLINS Service Center for installation.
Fits for vehicles
Ducati 1199 Panigale R (2015 – 2017)
- Racing product, not for use on public roads
Download
- Mounting Instruction Öhlins Motorcycle FKR 114 (English) (631,9 KB)
- Owner´s Manual Öhlins Motorcycle FKR 100 Cartridge Kit (English) (971,6 KB)
- Product News Öhlins Motorcycle FKR 100 Series (English) (728,0 KB)
- Owner´s Manual Öhlins Motorcycle FKR 100 Serie (German) (1.098,1 KB)
- Product News Öhlins Motorcycle FKR 100 Series (German) (1.000,6 KB)
FKR Cartridge Kit Racing (TTX 25) FKR 115
The racing inspired FKR cartridge kit has technology derived straight from the Moto3, Moto 2 and World Superbike championships developed by our engineers in Sweden and is designed for high end racing.
The FKR Cartridge kit features a spring pressurized system, compared to the old gas pressurized system, the spring pressure offers a more simplistic and user friendly design that also accounts for easier maintenance. But there are more advantages of a spring pressurized system. There is no risk of gas leakage, it also gives a more consistent performance curve and allows for a more compact design. With the Öhlins TTX technology, a new designed piston and an 8mm piston shaft we reduce the pressure build-up and create a faster damping response. That gives a “linear” style of damping characteristics which create more tuning options and also increases grip and bump absorption properties while improving chassis stability.
Part number
FKR 115
Type Code
TTX25 Cartridge Kit FKR
Technical data
Spring series: | 04744-Serie |
---|---|
Packaging included: | springs 9.5, 10.0, 10.5 N/mm |
Notes
Fits models with Showa OEM fork.
Cartridge Kit comes with 3 different spring rates: 9.5 ,10 & 10.5N/mm.
It is recommended to contact an authorised ÖHLINS Service Center for installation.
Fits for vehicles
Ducati 899 Panigale (2014 – 2015)
- Without "Teilegutachten" (Germany)
- Racing product, not for use on public roads
Ducati 959 Panigale (2016 – 2019)
- Without "Teilegutachten" (Germany)
- Racing product, not for use on public roads
Ducati Panigale V2 (2020 – )
- Without "Teilegutachten" (Germany)
- Racing product, not for use on public roads
Ducati Panigale V4 (2018 – 2020)
- Without "Teilegutachten" (Germany)
- Racing product, not for use on public roads
Download
- Mounting Instructions FKR 115 English (650,9 KB)
- Owner´s Manual TTX GP shock absorber Road & Track (English) (971,6 KB)
- Mounting Instructions TR 469 German (728,0 KB)
- Owner´s Manual TTX GP shock absorber Road & Track (German) (1.098,1 KB)
- FKR 100 Öhlins Product News (German) (1.000,6 KB)
TTX 25 Cartridge Kit (FKR 100) FKR 116
The racing inspired FKR cartridge kit has technology derived straight from the Moto3, Moto 2 and World Superbike championships developed by our engineers in Sweden and is designed for high end racing.
The FKR Cartridge kit features a spring pressurized system, compared to the old gas pressurized system, the spring pressure offers a more simplistic and user friendly design that also accounts for easier maintenance. But there are more advantages of a spring pressurized system. There is no risk of gas leakage, it also gives a more consistent performance curve and allows for a more compact design. With the Öhlins TTX technology, a new designed piston and an 8mm piston shaft we reduce the pressure build-up and create a faster damping response. That gives a “linear” style of damping characteristics which create more tuning options and also increases grip and bump absorption properties while improving chassis stability.
Part number
FKR 116
Type Code
TTX25 Cartridge Kit FKR
Technical data
Spring series: | 04744-Serie |
---|---|
Packaging included: | springs 9.5, 10.0, 10.5 N/mm |
Notes
Fits models with Showa OEM fork. It is recommended to contact an authorized ÖHLINS Service Center for installation.
Fits for vehicles
Honda CBR1000RR (2012 – 2019)
- Without "Teilegutachten" (Germany)
- Racing product, not for use on public roads
Download
- Mounting Instruction Öhlins Motorcycle FKR 116 (English) (651,4 KB)
- Owner´s Manual Öhlins Motorcycle FKR 100 Cartridge Kit (English) (971,6 KB)
- Product News Öhlins Motorcycle FKR 100 Series (English) (728,0 KB)
- Owner´s Manual Öhlins Motorcycle FKR 100 Serie (German) (1.098,1 KB)
- Product News Öhlins Motorcycle FKR 100 Series (German) (1.000,6 KB)
FKR Cartridge Kit Racing (TTX 25) FKR 118
The racing inspired FKR cartridge kit has technology derived straight from the Moto3, Moto 2 and World Superbike championships developed by our engineers in Sweden and is designed for high end racing.
The FKR Cartridge kit features a spring pressurized system, compared to the old gas pressurized system, the spring pressure offers a more simplistic and user friendly design that also accounts for easier maintenance. But there are more advantages of a spring pressurized system. There is no risk of gas leakage, it also gives a more consistent performance curve and allows for a more compact design. With the Öhlins TTX technology, a new designed piston and an 8mm piston shaft we reduce the pressure build-up and create a faster damping response. That gives a “linear” style of damping characteristics which create more tuning options and also increases grip and bump absorption properties while improving chassis stability.
Part number
FKR 118
Type Code
TTX25 Cartridge Kit FKR
Technical data
Spring series: | 04744-Serie |
---|---|
Packaging included: | springs 9.5, 10.0, 10.5N/mm |
Notes
For models with standard Showa fork (not Showa BFF fork with reservoir).
3x different spring rates (9.0, 9.5 & 10.0 N/mm) included.
It is recommended to contact an authorised ÖHLINS Service Center for installation. Race track use only.
Fits for vehicles
Suzuki GSX-R 1000 (2012 – 2019)
- Racing product, not for use on public roads
Download
- Mounting Instructions FKR 118 English (740,1 KB)
- Owner´s Manual TTX GP shock absorber Road & Track (English) (971,6 KB)
- Mounting Instructions TR 469 German (728,0 KB)
- Owner´s Manual TTX GP shock absorber Road & Track (German) (1.098,1 KB)
- FKR 100 Öhlins Product News (German) (1.000,6 KB)
TTX 25 Cartridge Kit (FKR 100) FKR 119
The racing inspired FKR cartridge kit has technology derived straight from the Moto3, Moto 2 and World Superbike championships developed by our engineers in Sweden and is designed for high end racing.
The FKR Cartridge kit features a spring pressurized system, compared to the old gas pressurized system, the spring pressure offers a more simplistic and user friendly design that also accounts for easier maintenance. But there are more advantages of a spring pressurized system. There is no risk of gas leakage, it also gives a more consistent performance curve and allows for a more compact design. With the Öhlins TTX technology, a new designed piston and an 8mm piston shaft we reduce the pressure build-up and create a faster damping response. That gives a “linear” style of damping characteristics which create more tuning options and also increases grip and bump absorption properties while improving chassis stability.
Part number
FKR 119
Type Code
TTX25 Cartridge Kit FKR
Technical data
Spring series: | 04744-Serie |
---|---|
Packaging included: | springs 9.0, 9.5, 10.0 |
Notes
It is recommended to contact an authorised ÖHLINS Service Center for installation. Race Track use only.
Fits for vehicles
Suzuki GSX-R600 (2011 – 2019)
- Without "Teilegutachten" (Germany)
- Racing product, not for use on public roads
Suzuki GSX-R750 (2011 – 2019)
- Without "Teilegutachten" (Germany)
- Racing product, not for use on public roads
Download
- Mounting Instruction Öhlins Motorcycle FKR 119 (English) (707,6 KB)
- Owner´s Manual Öhlins Motorcycle FKR 100 Cartridge Kit (English) (971,6 KB)
- Product News Öhlins Motorcycle FKR 100 Series (English) (728,0 KB)
- Owner´s Manual Öhlins Motorcycle FKR 100 Serie (German) (1.098,1 KB)
- Product News Öhlins Motorcycle FKR 100 Series (German) (1.000,6 KB)
TTX 25 Cartridge Kit (FKR 100) FKR 120
The racing inspired FKR cartridge kit has technology derived straight from the Moto3, Moto 2 and World Superbike championships developed by our engineers in Sweden and is designed for high end racing.
The FKR Cartridge kit features a spring pressurized system, compared to the old gas pressurized system, the spring pressure offers a more simplistic and user friendly design that also accounts for easier maintenance. But there are more advantages of a spring pressurized system. There is no risk of gas leakage, it also gives a more consistent performance curve and allows for a more compact design. With the Öhlins TTX technology, a new designed piston and an 8mm piston shaft we reduce the pressure build-up and create a faster damping response. That gives a “linear” style of damping characteristics which create more tuning options and also increases grip and bump absorption properties while improving chassis stability.
Part number
FKR 120
Type Code
TTX25 Cartridge Kit FKR
Technical data
Spring series: | 04744-Serie |
---|---|
Packaging included: | springs 9.0, 9.5, 10.0 N/mm |
Notes
Fits models with Öhlins fork FL 906.
3x different spring rates (9.0, 9.5 & 10.0 N/mm) included.
It is recommended to contact an authorised ÖHLINS Service Center for installation. Race Track use only.
Fits for vehicles
Triumph Daytona 675 R (2013 – 2018)
- Without "Teilegutachten" (Germany)
- Racing product, not for use on public roads
Triumph Daytona Moto2 765 (2020 – )
- Without "Teilegutachten" (Germany)
- Racing product, not for use on public roads
- Öhlins Fork FL 965
Download
- Mounting Instruction Öhlins Motorcycle TR 469 (English) (634,6 KB)
- Owner´s Manual Öhlins Motorcycle FKR 100 Cartridge Kit (English) (971,6 KB)
- Product News Öhlins Motorcycle FKR 100 Series (English) (728,0 KB)
- Owner´s Manual Öhlins Motorcycle FKR 100 Serie (German) (1.098,1 KB)
- Product News Öhlins Motorcycle FKR 100 Series (German) (1.000,6 KB)
FKR Cartridge Kit Racing (TTX 25) FKR 121
The racing inspired FKR cartridge kit has technology derived straight from the Moto3, Moto 2 and World Superbike championships developed by our engineers in Sweden and is designed for high end racing.
The FKR Cartridge kit features a spring pressurized system, compared to the old gas pressurized system, the spring pressure offers a more simplistic and user friendly design that also accounts for easier maintenance. But there are more advantages of a spring pressurized system. There is no risk of gas leakage, it also gives a more consistent performance curve and allows for a more compact design. With the Öhlins TTX technology, a new designed piston and an 8mm piston shaft we reduce the pressure build-up and create a faster damping response. That gives a “linear” style of damping characteristics which create more tuning options and also increases grip and bump absorption properties while improving chassis stability.
Part number
FKR 121
Type Code
TTX25 Cartridge Kit FKR
Technical data
Spring series: | 04744-Serie |
---|---|
Packaging included: | springs 9.5, 10.0, 10.5 N/mm |
Notes
Fits models with Öhlins fork FL 930.
3x different spring rates(9.5, 10.0 & 10.5 N/mm) included.
It is recommended to contact an authorised ÖHLINS Service Center for installation.
Fits for vehicles
Aprilia RSV4 RF (2017 – 2018)
- Racing product, not for use on public roads
- Fits only RSV4 RF '17 + '18 with Öhlins fork FL 930.
Download
- Mounting Instructions FKR 121 English (797,4 KB)
- Owner´s Manual TTX GP shock absorber Road & Track (English) (971,6 KB)
- Mounting Instructions TR 469 German (728,0 KB)
- Mounting Instructions FKR 121 German (760,5 KB)
- Owner´s Manual TTX GP shock absorber Road & Track (German) (1.098,1 KB)
- FKR 100 Öhlins Product News (German) (1.000,6 KB)
FKR Cartridge Kit Racing (TTX 25) FKR 122
The racing inspired FKR cartridge kit has technology derived straight from the Moto3, Moto 2 and World Superbike championships developed by our engineers in Sweden and is designed for high end racing.
The FKR Cartridge kit features a spring pressurized system, compared to the old gas pressurized system, the spring pressure offers a more simplistic and user friendly design that also accounts for easier maintenance. But there are more advantages of a spring pressurized system. There is no risk of gas leakage, it also gives a more consistent performance curve and allows for a more compact design. With the Öhlins TTX technology, a new designed piston and an 8mm piston shaft we reduce the pressure build-up and create a faster damping response. That gives a “linear” style of damping characteristics which create more tuning options and also increases grip and bump absorption properties while improving chassis stability.
Part number
FKR 122
Type Code
TTX25 Cartridge Kit FKR
Technical data
Spring series: | 08790-Serie, 04744-Serie |
---|---|
Recommended oil: | 01309 |
Packaging included: | springs 9.5, 10.0 & 10.5 |
Notes
It is recommended to contact an authorised ÖHLINS Service Center for installation.
Fits for vehicles
BMW S 1000 RR (2019 – 2020)
- Without "Teilegutachten" (Germany)
- Racing product, not for use on public roads
Download
- Öhlins product news BMW S1000RR 2019 (173,8 KB)
- Mounting Instructions FKR 122 English (664,3 KB)
- Owner´s Manual TTX GP shock absorber Road & Track (English) (971,6 KB)
- Öhlins Produkt News BMW S1000RR 2019 (179,4 KB)
- Owner´s Manual TTX GP shock absorber Road & Track (German) (1.098,1 KB)
FKR Cartridge Kit Racing (TTX 25) FKR 123
The racing inspired FKR cartridge kit has technology derived straight from the Moto3, Moto 2 and World Superbike championships developed by our engineers in Sweden and is designed for high end racing.
The FKR Cartridge kit features a spring pressurized system, compared to the old gas pressurized system, the spring pressure offers a more simplistic and user friendly design that also accounts for easier maintenance. But there are more advantages of a spring pressurized system. There is no risk of gas leakage, it also gives a more consistent performance curve and allows for a more compact design. With the Öhlins TTX technology, a new designed piston and an 8mm piston shaft we reduce the pressure build-up and create a faster damping response. That gives a “linear” style of damping characteristics which create more tuning options and also increases grip and bump absorption properties while improving chassis stability.
Part number
FKR 123
Type Code
TTX25 Cartridge Kit FKR
Notes
It is recommended to contact an authorised ÖHLINS Service Center for installation.
Fits for vehicles
Kawasaki Ninja ZX-6R 636 (2013 – 2019)
- Without "Teilegutachten" (Germany)
- Racing product, not for use on public roads
Download
- Mounting Instructions TR 469 German (728,0 KB)
- Mounting Instructions FKR 123 English (848,0 KB)
- Owner´s Manual TTX GP shock absorber Road & Track (English) (971,6 KB)
- FKR 100 Öhlins Product News (German) (1.000,6 KB)
- Owner´s Manual TTX GP shock absorber Road & Track (German) (1.098,1 KB)
TTX 25 Cartridge Kit (FKR 100) FKR 124
The racing inspired FKR cartridge kit has technology derived straight from the Moto3, Moto 2 and World Superbike championships developed by our engineers in Sweden and is designed for high end racing.
The FKR Cartridge kit features a spring pressurized system, compared to the old gas pressurized system, the spring pressure offers a more simplistic and user friendly design that also accounts for easier maintenance. But there are more advantages of a spring pressurized system. There is no risk of gas leakage, it also gives a more consistent performance curve and allows for a more compact design. With the Öhlins TTX technology, a new designed piston and an 8mm piston shaft we reduce the pressure build-up and create a faster damping response. That gives a “linear” style of damping characteristics which create more tuning options and also increases grip and bump absorption properties while improving chassis stability.
Part number
FKR 124
Type Code
TTX25 Cartridge Kit FKR
Technical data
Spring series: | 08790-Serie, 04744-Serie |
---|---|
Recommended oil: | 01309 |
Packaging included: | springs 9.5, 10.0 & 10.5 |
Notes
It is recommended to contact an authorised ÖHLINS Service Center for installation.
Fits for vehicles
Ducati Panigale V4 R (2019 – 2020)
- Without "Teilegutachten" (Germany)
- Racing product, not for use on public roads
TTX 25 Cartridge Kit (FKR 100) FKR 125
The racing inspired FKR cartridge kit has technology derived straight from the Moto3, Moto 2 and World Superbike championships developed by our engineers in Sweden and is designed for high end racing.
The FKR Cartridge kit features a spring pressurized system, compared to the old gas pressurized system, the spring pressure offers a more simplistic and user friendly design that also accounts for easier maintenance. But there are more advantages of a spring pressurized system. There is no risk of gas leakage, it also gives a more consistent performance curve and allows for a more compact design. With the Öhlins TTX technology, a new designed piston and an 8mm piston shaft we reduce the pressure build-up and create a faster damping response. That gives a “linear” style of damping characteristics which create more tuning options and also increases grip and bump absorption properties while improving chassis stability.
Part number
FKR 125
Type Code
TTX25 Cartridge Kit FKR
Technical data
Spring series: | 04744-Serie |
---|---|
Packaging included: | springs 9.5, 10.0, 10.5 N/mm |
Notes
Fits models with Öhlins OEM FL 941 fork.
It is recommended to contact an authorised ÖHLINS Service Center for installation.
Fits for vehicles
Honda CBR1000RR-R SP (2020 – 2021)
- Without "Teilegutachten" (Germany)
- Racing product, not for use on public roads
Download
- Mounting Instruction Öhlins Motorcycle FKR 125 (English) (663,4 KB)
- Owner´s Manual Öhlins Motorcycle FKR 100 Cartridge Kit (English) (971,6 KB)
- Product News Öhlins Motorcycle FKR 100 Series (English) (728,0 KB)
- Owner´s Manual Öhlins Motorcycle FKR 100 Serie (German) (1.098,1 KB)
- Product News Öhlins Motorcycle FKR 100 Series (German) (1.000,6 KB)
Öhlins TTX 25 Cartridge Kit (FKR 100) FKR 126
The racing inspired FKR cartridge kit has technology derived straight from the Moto3, Moto 2 and World Superbike championships developed by our engineers in Sweden and is designed for high end racing.
The FKR Cartridge kit features a spring pressurized system, compared to the old gas pressurized system, the spring pressure offers a more simplistic and user friendly design that also accounts for easier maintenance. But there are more advantages of a spring pressurized system. There is no risk of gas leakage, it also gives a more consistent performance curve and allows for a more compact design. With the Öhlins TTX technology, a new designed piston and an 8mm piston shaft we reduce the pressure build-up and create a faster damping response. That gives a “linear” style of damping characteristics which create more tuning options and also increases grip and bump absorption properties while improving chassis stability.
Part number
FKR 126
Type Code
TTX25 Cartridge Kit FKR
Technical data
Spring series: | 04744-Serie |
---|---|
Packaging included: | springs 9.5, 10.0, 10.5N/mm |
Notes
Fits models with Öhlins fork FL 940, FL 942 or FL 943!
It is recommended to contact an authorised ÖHLINS Service Center for installation.
Fits for vehicles
Yamaha YZF-R1M (2020 – 2021)
- Without "Teilegutachten" (Germany)
- Racing product, not for use on public roads
- Fits OEM Öhlins FL 940/FL 942/FL 943 fork
Öhlins TTX 25 Cartridge Kit (FKR 100) FKR 127
The racing inspired FKR cartridge kit has technology derived straight from the Moto3, Moto 2 and World Superbike championships developed by our engineers in Sweden and is designed for high end racing.
The FKR Cartridge kit features a spring pressurized system, compared to the old gas pressurized system, the spring pressure offers a more simplistic and user friendly design that also accounts for easier maintenance. But there are more advantages of a spring pressurized system. There is no risk of gas leakage, it also gives a more consistent performance curve and allows for a more compact design. With the Öhlins TTX technology, a new designed piston and an 8mm piston shaft we reduce the pressure build-up and create a faster damping response. That gives a “linear” style of damping characteristics which create more tuning options and also increases grip and bump absorption properties while improving chassis stability.
Part number
FKR 127
Type Code
TTX25 Cartridge Kit FKR
Technical data
Spring series: | 04744-Serie |
---|---|
Packaging included: | springs 9.5, 10.0, 10.5 N/mm |
Notes
It is recommended to contact an authorised ÖHLINS Service Center for installation.
Fits for vehicles
Honda CBR1000RR-R (2020 – 2021)
- Without "Teilegutachten" (Germany)
- Racing product, not for use on public roads
Features
NIX 22 Cartridge Kit FKS 201
Öhlins cartridge kits are based on our experience learned through decades of testing and racing in high tier championships. Our cartridge kits deliver loads of performance together with stable damping characteristics while ensuring great comfort and contributing to rider confidence. With the NIX22 cartridge kits this now available for motorcycles with conventional front forks.
Each Öhlins cartridge kit has been tested extensively and tailor made to suit the individual requirements and characteristics for each individual bike. In combination with the well proven “NIX” design which features compression damping in the left leg and rebound damping in the right leg, it allows for a more precise function and stability. All adjustments including spring preload are made at the top cap.
The cartridge system fits into the original front fork, springs have to be ordered individually - please follow our recommendations regarding spring rates in relation to rider's weight.
Part number
FKS 201
Type Code
NIX 22
Technical data
Position: | front |
---|---|
Spring series: | 08428-Serie |
Recommended oil: | 01309 |
Oil level mm: | 120 mm |
Packaging unit: | pair |
Notes
Springs are not included in the kit and have to be ordered individually.
It is recommended to contact an ÖHLINS Service Center for installation.
Fits for vehicles
Honda CBR250R (2011 – 2016)
- Teilegutachten (Germany)
Honda CBR300R (2015 – 2016)
- Teilegutachten (Germany)
Download
- Mounting Instructions FKS 201 English (789,1 KB)
- Owners Manual FKS 200 Cartridge Kit English (1.116,1 KB)
- Mounting Instructions FKS 201 German (812,1 KB)
- Owners Manual FKS 200 Cartridge Kit German (1.275,7 KB)
NIX 22 Cartridge Kit FKS 203
Öhlins cartridge kits are based on our experience learned through decades of testing and racing in high tier championships. Our cartridge kits deliver loads of performance together with stable damping characteristics while ensuring great comfort and contributing to rider confidence. With the NIX22 cartridge kits this now available for motorcycles with conventional front forks.
Each Öhlins cartridge kit has been tested extensively and tailor made to suit the individual requirements and characteristics for each individual bike. In combination with the well proven “NIX” design which features compression damping in the left leg and rebound damping in the right leg, it allows for a more precise function and stability. All adjustments including spring preload are made at the top cap.
The cartridge system fits into the original front fork, springs have to be ordered individually - please follow our recommendations regarding spring rates in relation to rider's weight.
Part number
FKS 203
Type Code
NIX 22
Technical data
Position: | front |
---|---|
Spring series: | 08429-Serie |
Recommended oil: | 01309 |
Oil level mm: | 130 mm |
Packaging unit: | pair |
Notes
Springs are not included in the kit and have to be ordered individually.
It is recommended to contact an ÖHLINS Service Center for installation.
Fits for vehicles
Yamaha MT-03 (2016)
- Teilegutachten (Germany)
Yamaha MT-03 (2017 – 2019)
- "ABE" in preparation (Germany)
Yamaha YZF-R25 (2014 – 2018)
- "ABE" in preparation (Germany)
Yamaha YZF-R3 (2015 – 2016)
- Teilegutachten (Germany)
Yamaha YZF-R3 (2017 – 2018)
- "ABE" in preparation (Germany)
Download
- Mounting Instructions FKS 203 English (628,7 KB)
- Owners Manual FKS 200 Cartridge Kit English (1.116,1 KB)
- Mounting Instructions FKS 203 German (771,2 KB)
- Owners Manual FKS 200 Cartridge Kit German (1.275,7 KB)
NIX 22 Cartridge Kit FKS 204
Öhlins cartridge kits are based on our experience learned through decades of testing and racing in high tier championships. Our cartridge kits deliver loads of performance together with stable damping characteristics while ensuring great comfort and contributing to rider confidence. With the NIX22 cartridge kits this now available for motorcycles with conventional front forks.
Each Öhlins cartridge kit has been tested extensively and tailor made to suit the individual requirements and characteristics for each individual bike. In combination with the well proven “NIX” design which features compression damping in the left leg and rebound damping in the right leg, it allows for a more precise function and stability. All adjustments including spring preload are made at the top cap.
The cartridge system fits into the original front fork, springs have to be ordered individually - please follow our recommendations regarding spring rates in relation to rider's weight.
Part number
FKS 204
Type Code
NIX 22
Technical data
Position: | front |
---|---|
Spring series: | 08429-Serie |
Recommended oil: | 01309 |
Packaging unit: | pair |
Notes
Springs are not included in the kit and have to be ordered individually.
It is recommended to contact an ÖHLINS Service Center for installation.
Fits for vehicles
Yamaha MT-07 (2014 – 2020)
- Teilegutachten (Germany)
Yamaha Tracer 700 (2016 – 2019)
- Teilegutachten (Germany)
Yamaha XSR700 (2016 – 2020)
- Teilegutachten (Germany)
Download
- Mounting Instructions FKS 204 English (760,1 KB)
- Owners Manual FKS 200 Cartridge Kit English (1.116,1 KB)
- Mounting Instructions FKS 204 German (790,3 KB)
- Owners Manual FKS 200 Cartridge Kit German (1.275,7 KB)
NIX 22 Cartridge Kit FKS 209
Öhlins cartridge kits are based on our experience learned through decades of testing and racing in high tier championships. Our cartridge kits deliver loads of performance together with stable damping characteristics while ensuring great comfort and contributing to rider confidence. With the NIX22 cartridge kits this now available for motorcycles with conventional front forks.
Each Öhlins cartridge kit has been tested extensively and tailor made to suit the individual requirements and characteristics for each individual bike. In combination with the well proven “NIX” design which features compression damping in the left leg and rebound damping in the right leg, it allows for a more precise function and stability. All adjustments including spring preload are made at the top cap.
The cartridge system fits into the original front fork, springs have to be ordered individually - please follow our recommendations regarding spring rates in relation to rider's weight.
Part number
FKS 209
Type Code
NIX 22
Technical data
Position: | front |
---|---|
Spring series: | 08429-xx |
Recommended oil: | 01309-01 |
Oil level mm: | 130 mm |
Packaging unit: | pair |
Notes
Springs are not included in the kit and have to be ordered individually.
It is recommended to contact an ÖHLINS Service Center for installation.
Fits for vehicles
Kawasaki ER-6f (2012 – 2016)
- Teilegutachten (Germany)
Kawasaki ER-6n (2012 – 2016)
- Teilegutachten (Germany)
Kawasaki Ninja 650 (2017 – 2020)
- "ABE" in preparation (Germany)
Kawasaki Z650 (2017 – 2020)
- Teilegutachten (Germany)
Download
- Mounting Instructions FKS 209 English (746,4 KB)
- Owners Manual FKS 200 Cartridge Kit English (1.116,1 KB)
- Mounting Instructions FKS 209 German (767,4 KB)
- Owners Manual FKS 200 Cartridge Kit German (1.275,7 KB)