HHR Performance - Featured Products
Browse Featured Products Products
When developing the 4SR Club Sport jeans, we have used our experience from World Superbikes technology, to ensure these sporty jeans, work in the same way as our racing Leathers, using flexible panels above the knees.
Flexible and elastic Kevlar® by DuPont, has been used to produce these jeans, to ensure maximized comfort and mobility while riding your motorcycle.
The 4SR Club Sport Jeans also have ventilation that is strategically placed on the upper thighs, right next to the side pockets. The location of the ventilation on the upper thigh reduces the risk of injury from the zip for the wearer. For added safety, the vent is also covered with Kevlar, for extra protection.
Like any other garment we produce at 4SR, the Club Sport Jeans are equipped with quality knee protectors, which are of course to the highest level 2 T + certification and with the ergonomic 3D shape of the protector not only protects the knee but also the shin.
Thanks to the development of our professional riders along with our experience in the world of motorcycle and world championship motorcycle racing, we know that the right shape of the protector is one of the most important aspects.
4SR Jeans are still the only Kevlar jeans on the market that have the fixation of the guards in the right place and meet the highest standard requirements. 4SR have the patented AFS - Armor Fixation System.
How does the 4SR AFS work? The trousers have a loose elastic stocking that holds the knee and shin protector in place and is independent from the top layer of material. So you still have the protector in the right place, while enjoying the freedom and movement of safe Kevlar jeans.
Additionally, you can adjust the protector up and down to position them exactly where you feel most comfortable according to your height.
TESTED BY HUMANS
Fuel tank foam kit, for BMW Superbike models, 65 cubes à 5x5x5 cm, tailored for BMW OEM fuel tank
Oil filler plug kit, fits to all BMW Superbike models, oil filler plug aluminum milled
Oil filter locking kit, for BMW S 1000 RR 2019- (K67) and M 1000 RR 2021- (K66), kit incl. safety wire
Racing airbox, for BMW S 1000 RR 2019- (K67), incl. SAS cover and racing air filter
Racing chain DID 520 pitch, 120 links, ZVM-X G&G
Worried about potential damage happening to your beautiful S1000RR / S1000R instrument cluster? Look no further as Bonamici has released this specifically designed for the latest S1000RR / S1000R to help protect your dashboard from anything unwanted touching the expensive TFT Dash, leading to potential damage. Manufactured from Billet Aluminium which is suitable for absorbing shocks while featuring a plexi-glass protective panel which is treated to an anti-fog finish to ensure your tachometer is visible in all conditions.
This Fuel Cap has been designed by Bonamici to directly replace the OEM Fuel Cap component on the BMW S1000RR / HP4 / S1000R, allowing you to have faster fueling times, drastically helping in something like a pit lane environment. This Fuel Tank Cap kit is perfect for either a Trackday Warrior or even your Fair Weather Rider! Manufactured from Billet Aluminium and treated to an anodized surface finish, you can rest assured that this Fuel Tank Cap Kit will withstand the harshest of conditions while looking amazing at the same time!
*Carbon Weave will match all other Carbonin products carbon including the Carbonin Airbox Cover W/ Side Panels.
*Made to fit over OEM Tank and perefect fitment with Carbonin Airbox cover
*Created for better braking ergonomics and mid turn handling.
*Keeps you from Sliding forward and also give something for your leg to hold onto in mid corner.
*New design with thicker carbon weave that is lighter and stronger.
*7oz Total weight
*3M Vinyl Tape Included for Installation
Give your friends and family a gift they will appreciate with our HHR Performance gift cards!
-Great way to support your local racer or race team or just to say thank you to someone!
Cooler fuel = better performance.
Heat is the enemy when it comes to robbing power.
Its not just only the water temperature that you need to keep cool for optimum performance, Keeping your fuel cool produces the best power and why spend that extra money on race fuel if it is not staying cool.
Ever wonder why teams keep their fuel in fridges or on ice? add it at the last minute? Not to mention when it heats up it expands and it could be the difference of fitting that last 1/8th of a gallon in to finish that race!
These kits come pre cut to fit your model motorcycle , all you need to do is remove any factory heat sheild material clean with a degreaser and install your Teknofibra material , It really is simple.
This material is thinner and lighter than the material that comes from the factory which is a mineral based fiber.
Teknofibra is unlike anything else and will not burn or catch fire, it is non toxic and has proven to keep fuel temps up to 48degrees F cooler than oem material
Technical partner of JIR, Teknofibra® has long been known in the industry and used by prestigious Moto2, World Superbike, CIV and many others teams, for the following applications:
Protection of fairing and belly positioned in close proximity of the exhaust pipes.
Interposed between air box and throttle body allows the aspiration of cold air.
Glued under the tank keeps the lower the fuel temperature.
It maintains a stable temperature of the gas /oil on the nitrogen tank bladder of the dampers installed near the exhaust pipes.
Protects the battery and wiring avoiding problems to the ECU.
Protection of electronic components in hot areas.
Under the saddle and the cowl cover It protects the rider from the heat transmitted from the engine and the exhaust system.
More generally, to solve any problem of heat.
Teknofibra Heat shield material is designed to keep any radiant temperature from the engine or exhaust from heating up the fuel in the tank. Cooler fuel = better performance. Heat is the enemy when it comes to robbing power. Its not just only the water temperature that you need to keep cool for optimum performance, Keeping your fuel cool produces the best power and why spend that extra money on race fuel if it is not staying cool. Ever wonder why teams keep their fuel in fridges or on ice? add it at the last minute? Not to mention when it heats up it expands and it could be the difference of fitting that last 1/8th of a gallon in to finish that race! These kits come pre cut to fit your model motorcycle , all you need to do is remove any factory heat sheild material clean with a degreaser and install your Teknofibra material , It really is simple. This material is thinner and lighter than the material that comes from the factory which is a mineral based fiber. Teknofibra is unlike anything else and will not burn or catch fire, it is non toxic and has proven to keep fuel temps up to 48degrees F cooler than oem material Technical partner of JIR, Teknofibra® has long been known in the industry and used by prestigious Moto2, World Superbike, CIV and many others teams, for the following applications: Protection of fairing and belly positioned in close proximity of the exhaust pipes. Interposed between air box and throttle body allows the aspiration of cold air. Glued under the tank keeps the lower the fuel temperature. It maintains a stable temperature of the gas /oil on the nitrogen tank bladder of the dampers installed near the exhaust pipes. Protects the battery and wiring avoiding problems to the ECU. Protection of electronic components in hot areas. Under the saddle and the cowl cover It protects the rider from the heat transmitted from the engine and the exhaust system. More generally, to solve any problem of heat.
-320mm x 5.75mm
-Bobbin-Less
-Exclusive Carrier Technology
-Sold as a set Left and Right
-Hand-crafted from Billet Metal
-Better Cooling
-Increased braking modulation
-Excellent pad cleaning
-Reduced residual torque
-Improved safety
-Bobbin-less
-Exclusive Carrier Technology
-More Arms than any other leading competitor
-5.75mm thickness
-Sold as a set Left and Right
-Hand-crafted from Billet Metal
-Better Cooling
-Increased braking modulation
-Excellent pad cleaning
-Reduced residual torque
-Improved safety
If you are using different calipers that require a Narrow Band Rotor please let us know when ordering so we can make sure you receive the correct size for your brake set up. Ie some Brembo Calipers use a Narrow Pad
If your using the oem Brembo this rotor application is correct
-Bobbin-less
-Exclusive Carrier Technology
-More Mounting points than any other leading competitor
-5.75mm thickness
-Sold as a set Left and Right
-Hand-crafted from Billet Metal
-Better Cooling
-Increased braking modulation
-Excellent pad cleaning
-Reduced residual torque
-Improved safety
If you are using different calipers that require a Narrow Band Rotor please let us know when ordering so we can make sure you receive the correct size for your brake set up. Ie some Brembo Calipers use a Narrow Pad
If your using the oem Brembo this rotor application is correct
As seen in Moto2, Moto3 and World Superbike! World class level rotors now available for the professional racer or track day junkie!
TK Dischi Freno EVO Ventilated Floating Rotors for Competition use only.
-Sold as a set, Left and Right
-330mm x 5.75mm
-Bobbin-less
-Exclusive Carrier Technology
-Hand-crafted from Billet Metal
-Better Cooling with angled holes in both directions
-Increased braking modulation
-Excellent pad cleaning
-Reduced residual torque
-Improved safety
As seen in Moto2, Moto3 and World Superbike! World class level rotors now available for the professional racer or track day junkie!
TK Dischi Freno EVO Ventilated Floating Rotors for Competition use only.
-Sold as a set, Left and Right
-330mm x 5.75mm
-Bobbin-less
-Exclusive Carrier Technology
-Hand-crafted from Billet Metal
-Better Cooling with angled holes in both directions
-Increased braking modulation
-Excellent pad cleaning
-Reduced residual torque
-Improved safety
1dn 5up or 1up 5dn road or race pattern
Yamaha Blip Assist System for R6 models 2017 onwards with Yamaha Quickshifter wiring. Plug&Play system.(includes ECU, DCS sensor, tie rod kit and pit lane warm up button assembly). (comes with M8 LH thread tie-rod).This new state-of-the-art Throttle Blipper system or Down Shifter is designed to compliment Translogic's Intellishift DCS, QSXi, QSX Quckshifter systems and Powershift systems. The Blip Assist ECU interfaces with the engines throttle body connectors via the plug&play connectors. During down shifts either Translogic's DCS sensor or Powershifter ECU sends a signal to the Blip Assist ECU which then performs a controlled throttle blip depending on riding conditions at the time of the down shift.
The exciting NEW pit lane warm up feature incorporated into these state-of-the-art throttle blipper systems is activated by an anodised billet aluminium handle bar mounted bracket encapsulating a single sealed tactile button featuring gold plated contacts for precise operation.
Fully adjustable and adaptive. The strength/duration of the throttle blip can be adjusted using Translogic's Pro-Tuner-Mode (No PC is necessary). The sensor trigger force can be adjusted too as well as the intensity of the blip itself in 5 different RPM bands. There are default settings within the Blip Assist ECU thanks to the hundreds of hours of real world testing carried out by Translogic Systems and it's professional partners giving you a great head start when first experiencing this new technology.