HHR Performance » Teknofibra
Teknofibra® – Motorcycle Heat Shields
The main advantages of Teknofibra® are:
Teknofibra® heat shields are nontoxic and completely safe.
The low thermal conductivity of Teknofibra’s heat shields ensure an extremely low rate of thermal transmission.
In the event of a fire, Teknofibra’s motorcycle heat shield products don’t burn or produce toxic/hazardous emissions.
They do a phenomenal job of absorbing sound and cutting down on sound emission.
The most lightweight product on the market that provides such a low degree of thermal conductivity.
Heat shield material that works! A technical partner of JIR, Teknofibra® has long been known in the industry for their incredible line of lightweight motorcycle heat shield products. The prestigious Moto2, World Superbike, CIV, and many other professional motorcycle racing teams use Teknofibra® heat shields for various reasons, including:
- Protection of motorcycle fairings and belly position near the exhaust pipes.
- Maintenance of lower fuel temperature due to its placement on the exterior of the fuel tank. This helps maintain a stable fuel temperature, increasing fuel efficiency and maximizing the amount of fuel you can hold in your fuel tank. It can also be used to keep other fluids cool.
- Protection of the battery, wiring, and other electronic components, which prevents problems with the ECU.
- Protection of the rider from heat transmitted from the engine or exhaust systems by lining the cowl or saddle.
Browse our selection of Teknofibra® fuel tank thermal insulation kits, heat shield kits, and more. Learn firsthand why some of the greatest teams in the world utilize Teknofibra® to get the best performance and protection they can.
Browse Featured Products Products
Cooler fuel = better performance.
Heat is the enemy when it comes to robbing power.
Its not just only the water temperature that you need to keep cool for optimum performance, Keeping your fuel cool produces the best power and why spend that extra money on race fuel if it is not staying cool.
Ever wonder why teams keep their fuel in fridges or on ice? add it at the last minute? Not to mention when it heats up it expands and it could be the difference of fitting that last 1/8th of a gallon in to finish that race!
These kits come pre cut to fit your model motorcycle , all you need to do is remove any factory heat sheild material clean with a degreaser and install your Teknofibra material , It really is simple.
This material is thinner and lighter than the material that comes from the factory which is a mineral based fiber.
Teknofibra is unlike anything else and will not burn or catch fire, it is non toxic and has proven to keep fuel temps up to 48degrees F cooler than oem material
Technical partner of JIR, Teknofibra® has long been known in the industry and used by prestigious Moto2, World Superbike, CIV and many others teams, for the following applications:
Protection of fairing and belly positioned in close proximity of the exhaust pipes.
Interposed between air box and throttle body allows the aspiration of cold air.
Glued under the tank keeps the lower the fuel temperature.
It maintains a stable temperature of the gas /oil on the nitrogen tank bladder of the dampers installed near the exhaust pipes.
Protects the battery and wiring avoiding problems to the ECU.
Protection of electronic components in hot areas.
Under the saddle and the cowl cover It protects the rider from the heat transmitted from the engine and the exhaust system.
More generally, to solve any problem of heat.
Teknofibra Heat shield material is designed to keep any radiant temperature from the engine or exhaust from heating up the fuel in the tank. Cooler fuel = better performance. Heat is the enemy when it comes to robbing power. Its not just only the water temperature that you need to keep cool for optimum performance, Keeping your fuel cool produces the best power and why spend that extra money on race fuel if it is not staying cool. Ever wonder why teams keep their fuel in fridges or on ice? add it at the last minute? Not to mention when it heats up it expands and it could be the difference of fitting that last 1/8th of a gallon in to finish that race! These kits come pre cut to fit your model motorcycle , all you need to do is remove any factory heat sheild material clean with a degreaser and install your Teknofibra material , It really is simple. This material is thinner and lighter than the material that comes from the factory which is a mineral based fiber. Teknofibra is unlike anything else and will not burn or catch fire, it is non toxic and has proven to keep fuel temps up to 48degrees F cooler than oem material Technical partner of JIR, Teknofibra® has long been known in the industry and used by prestigious Moto2, World Superbike, CIV and many others teams, for the following applications: Protection of fairing and belly positioned in close proximity of the exhaust pipes. Interposed between air box and throttle body allows the aspiration of cold air. Glued under the tank keeps the lower the fuel temperature. It maintains a stable temperature of the gas /oil on the nitrogen tank bladder of the dampers installed near the exhaust pipes. Protects the battery and wiring avoiding problems to the ECU. Protection of electronic components in hot areas. Under the saddle and the cowl cover It protects the rider from the heat transmitted from the engine and the exhaust system. More generally, to solve any problem of heat.
More About Teknofibra
