HHR Performance » FTECU

FTECU

Motorcycle ECU Flash Kits from FTECU

Our goal at HHR Performance is to provide both casual and serious motorcyclists with high-end tools and software utilized by the professionals to take their motorbike to the next level. We only carry the parts and tools that have proven to be successful for racers of all kinds, including FTECU (Flash Tune ECU) products. FTECU aimed to provide advanced and average motorcycle riders with the tools traditionally only available to factory race bikes, including motorcycle ECU flash kits.

FTECU offers motorcycle ECU flashing kits, auto tuners, auto blippers, and quickshifters. FTECU are the experts in unlocking your stock ECU and unleashing your bike’s full potential. This is especially important after making modifications to your bike, such as the removal of your catalytic converter. Browse our selection of FTECU Flash Tune products, FTECU bench kits, software, and accessories today.


FTECU Categories

View  
Items 1-2 of 2
Engine Electronics
When it comes to your bikes performance, dialing in your engines electronics is among the first things you will need to address when getting a bike ready for the track. The Stock electronics can be...More Details »
 Exhaust Systems
HHR Performance specializes in carrying high-performance motorcycle exhaust systems and slip-ons, half systems, full systems, exhaust brackets, accessories, and more. Browse our carefully selected...More Details »
Items 1-2 of 2

FTECU Products

Sort
View
 
Items 1-43 of 43
Description:
 
FTEcu Kawasaki Active Tune AFR Self Tuning ECU Kit. This Kit lets your FTECU equipped bike tune itself as you ride! Once installed and activated, the ActiveTune kit monitors the fuel mixture making fast and consistent changes to mitigate changing fuel requirements.

This breakthrough system replaces your inadequate stock O2 sensor with a proprietary FTECU lambda controller and the latest generation Bosch LSU 4.9 sensor.

This kit requires:

  • Data-Link ECU Flashing Kit ( bike harness required for tuning / data acquisition )
  • Exhaust with a standard 18×1.5 O2 sensor bung (optionally cylinder specific bungs)
  • Smog block-offs or disabled AIS valve (Graves Smog Block Off plates listed separately) 


FTEcu Yamaha Active Tune


This kit includes:

  • 1 FTECU YAM-01 Lambda Controller
  • 1 Bosch LSU4.9 wideband O2 sensor
  • 1 Product Activation Card


Model Fitment:

  • Kawasaki ZX10 2016-2019 Note: You will need an 18x1.5mm Lamda Collar in your ZX10 exhaust for this installation this does not come on the stock exhausts but standard on Graves Cat Eliminator and Full Exhaust Systems.
  • Kawasaki H2 2015+ Note:  You will need an 18x1.5mm Lamda Collar in your exhaust for this installation 
  • Kawasaki ZX-6R 2019 Note:  You will need an 18x1.5mm Lamda Collar in your exhaust for this installation 


Item #: FT_KAW_LCAT
Condition: New
Price: $385.00

Qty:

Description:
Flash Tune Kit Kawasaki Ninja EX300
The 2013-2017 Kawasaki Ninja EX300 Flash Tune Data-Link ECU Flashing Kits : Your bike already has a standalone ECU and now you can get the tools to program it! There is no longer any need to send away your ECU!

Fitment:

  • Fitment : Kawasaki Ninja EX300 2013-2017


This Interface allows you to easily adjust the following!

  • Remove ECU Restrictions
  • Engine Braking adjustments
  • High Load Fuel Maps (with PC3 and PC5 map importing)
  • Low Load (cruising) Fuel Maps
  • Fuel Injector Proportioning
  • Cylinder Specific Ignition Timing
  • Variable Stack RPM Adjustment
  • Cooling Fan Temp Adjustment
  • Remove Top Speed Limiter
  • Steering Damper Elimination
  • EXUP Valve Elimination
  • Force AIS Valve Closed
  • and new features are added regularly.


Bench ECU Flashing Kit Includes:
  • FTdataLink ECU Interface USB Cable
  • Bench Flashing Harness to flash your ECU outside of the bike
  • Power Supply for Bench flashing
  • FT ECU License to allow unlimited flashes for a single ecu


We believe everyone deserves the same tuning technology that until now was reserved for factory riders. With the FTEcu software you can remove the restrictions that the factory must put in place to meet strict street vehicle guidelines. By flashing your ECU you are able to tune your bike without interfering with critical correction factors resulting in smoother power gains than ever before possible.This product is for RACE USE ONLY! The included software will automatically update as new features are added!
Item #: FT-BNKT10
Condition: New
Price: $450.00

Qty:

Description: Flash Tune Quick Shifter Harness addition Yamaha R1 / R6 / Super Tenere : These harnesses allow for plug and play installation of a FlashTune / dynojet quick shifter sensor to be added to your motorcycle that is equipped with an FT Ecu flash tune and has quick shifting activated. Note: The dynojet PC5 push or pull sensor and shift rods are sold seperately.
Item #: FT-QSHA1
Condition: New
Price: $39.99
Qty:

Description: Flash Tune Shift Rod - BUILD Kits. The FTEcu Shift Rods are designed for certain Quick Shifters and work only for specific bike models and setups. As a result, not all bike models require the purchase of a Shift Rod Kit.

How to Find your Bike's Shift Rod/s on this Site:

To determine whether or not your motorcycle requires a shift rod kit, please refer to the information below (NOTE: You can also use these shift rod build kits for universal applications). The chart below outlines what type of Dynojet Quick Shifter your bike uses and what shift rods will be needed with the stock rearsets and the standard shift patter. For racing shift patterns (reverse shifting), you will need to determine if you are pushing or pulling the shift rod end points so you will select the correct setup. If you have any questions do not hesitate to contact the Sport Bike experts at Graves Motorsports.

Models Using the PC5 require the use of the QEM add-on unit.
Item #: SHIFTROD
Condition: New
Price: $15.95

Description:
The 2017 Yamaha R6 / 2015-2018 Yamaha R1 / R1M / R1S + 2017 FZ10 / 2018 MT-10  Flash Tune Data-Link ECU Flashing Kits : Your bike already has a standalone ECU and now you can get the tools to program it! There is no longer any need to send away your ECU! Note: Bench kit and the separate listing bike side kit do the same thing but one tunes off the bike and the other attaches to the bike. Scroll down for in depth kit information.Thank you. 

Fitment:

  • Yamaha R6 2017-2018 / Yamaha R1 2015-2018 / R1M 2015-2018 / R1S 2016-2017 / Yamaha FZ10 2017 / Yamaha MT-10 2018


This Interface allows you to easily adjust the following!

Remove ECU Restrictions
  • High Load Fuel Maps (PC5 map importing)
  • Low Load (cruising) Fuel Maps and Bias Mapping
  • Fuel Injector Proportioning
  • Engine Braking adjustments
  • Cylinder Specific Ignition Timing
  • Variable Stack RPM Adjustment
  • Cooling Fan Temp Adjustment
  • Remove Top Speed Limiter
  • Steering Damper Elimination
  • EXUP Valve Elimination
  • Force AIS Valve Closed
  • *This kit is also compatible with the R1M and R1S
  • and new features are added regularly.


Bench ECU Flashing Kit Includes:
  • FTdataLink ECU Interface USB Cable
  • Bench Flashing Harness to flash your ECU outside of the bike
  • Power Supply for Bench flashing
  • FT ECU License to allow unlimited flashes for a single ecu


We believe everyone deserves the same tuning technology that until now was reserved for factory riders. With the FTEcu software you can remove the restrictions that the factory must put in place to meet strict street vehicle guidelines. By flashing your ECU you are able to tune your bike without interfering with critical correction factors resulting in smoother power gains than ever before possible.This product is for RACE USE ONLY! The included software will automatically update as new features are added!
Item #: FT-BNKT18
Condition: New
Price: $450.00

Qty:

Description:
 
Flash Tune Data-Link (Bike side) ECU Flashing Kits for the 2019 Kawasaki ZX-6R + 2017-2019 Z900 : Your bike already has a standalone ECU and now you can get the tools to program it! There is no longer any need to send away your ECU! Note: Bike side kit attaches to the bike to allow lap top access with the included tuning cable.

Fitment:

  • Kawasaki ZX-6R 2019 + Z900 2017-2019

This Interface allows you to easily adjust the following!

  • Remove ECU Restrictions
  • High Load Fuel Maps (with PC3 and PC5 map importing)
  • Low Load (cruising) Fuel Maps and Bias Mapping
  • Cylinder Specific Ignition Timing by Gear
  • Throttle by Wire Adjustments
  • Engine Braking Adjustments
  • Cooling Fan Temp Adjustment
  • Disable Injector Decel cut-off
  • and new features are added regularly.
  • See screen shot for list of current features


Data-Link ECU Flashing Bike Side Kit Includes:
  • FTdataLink ECU Interface USB Cable
  • Bike-side programming harness to permanently install on your bike
  • FT ECU License to allow unlimited flashes for a single ecu


We believe everyone deserves the same tuning technology that until now was reserved for factory riders. With the FTEcu software you can remove the restrictions that the factory must put in place to meet strict street vehicle guidelines. By flashing your ECU you are able to tune your bike without interfering with critical correction factors resulting in smoother power gains than ever before possible.This product is for RACE USE ONLY! The included software will automatically update as new features are added!
Item #: FT-FTDL13
Condition: New
Price: $380.00

Qty:

Description:
 
The 2016-2019 Kawasaki ZX10 Flash Tune Data-Link ECU Flashing Kits : Your bike already has a standalone ECU and now you can get the tools to program it! There is no longer any need to send away your ECU! Note: Bench kit and the seperate listing bike side kit do the same thing but one tunes off the bike and the other attaches to the bike. Scroll down for indepth kit information. Thank you.

Fitment:

  • Kawasaki ZX10 2016-2019


This Interface allows you to easily adjust the following!

  • Remove Throttle-By-Wire Restrictions
  • Engine Braking adjustments
  • High Load Fuel Maps (with PC3 and PC5 map importing)
  • Low Load (cruising) Fuel Maps
  • Ignition Timing
  • Immobilizer Function
  • Cooling Fan Temps
  • Rev-Limiter Control
  • and new features are added regularly.


Bench ECU Flashing Kit Includes:
  • FTdataLink ECU Interface USB Cable
  • Bench Flashing Harness to flash your ECU outside of the bike
  • Power Supply for Bench flashing
  • FT ECU License to allow unlimited flashes for a single ecu


We believe everyone deserves the same tuning technology that until now was reserved for factory riders. With the FTEcu software you can remove the restrictions that the factory must put in place to meet strict street vehicle guidelines. By flashing your ECU you are able to tune your bike without interfering with critical correction factors resulting in smoother power gains than ever before possible.This product is for RACE USE ONLY! The included software will automatically update as new features are added!
Item #: FT-4P-BNKT-05
Condition: New
Price: $450.00

Qty:

Description:
 
The 2016-2019 Kawasaki ZX10 Flash Tune Data-Link ECU Bike Side Flashing Kit : Your bike already has a standalone ECU and now you can get the tools to program it! There is no longer any need to send away your ECU! Note: Bike side and the separate listing bench tuning kit do the same thing but one tunes off the bike (remove ecu bring to computer) and the other attaches to the bike (this listing attached a small harness to your motorcycle). Scroll down for in-depth kit information. Thank you.

Fitment:

  • Kawasaki ZX10 2016-2019


This Interface allows you to easily adjust the following!

  • Remove Throttle-By-Wire Restrictions
  • Engine Braking adjustments
  • High Load Fuel Maps (with PC3 and PC5 map importing)
  • Low Load (cruising) Fuel Maps
  • Ignition Timing
  • Immobilizer Function
  • Cooling Fan Temps
  • Rev-Limiter Control
  • and new features are added regularly.


Bike Side Data-Link ECU Flashing Kit Includes:
  • FTdataLink ECU Interface USB Cable
  • Bike-side programming harness to permanently install on your bike
  • FT ECU License to allow unlimited flashes for a single ecu


We believe everyone deserves the same tuning technology that until now was reserved for factory riders. With the FTEcu software you can remove the restrictions that the factory must put in place to meet strict street vehicle guidelines. By flashing your ECU you are able to tune your bike without interfering with critical correction factors resulting in smoother power gains than ever before possible.This product is for RACE USE ONLY! The included software will automatically update as new features are added!
Item #: FT-4P-FTDL-04
Condition: New
Price: $380.00

Qty:

Description:

Bench Tuning Kit : Flash Tune Data-Link ECU Flashing Kits : Your bike already has a standalone ECU and now you can get the tools to program it! There is no longer any need to send away your ECU! See bike fitments for the different types of setups below -Thank you. Scroll down for in-depth kit information. 

Fitment: 

  • Yamaha R1 2007-2008 (BENCH KIT)
  • Yamaha R6 2008-2016 (BENCH KIT)
  • VMax 2009-2011 (BENCH KIT ONLY)



This Interface allows you to easily adjust the following! 

  • Remove ECU Restrictions
  • Engine Braking adjustments
  • High Load Fuel Maps (with PC3 and PC5 map importing)
  • Low Load (cruising) Fuel Maps
  • Fuel Injector Proportioning
  • Ignition Timing
  • Immobilizer Function
  • Cooling Fan Temps
  • Rev-Limiter Control
  • Remove Top Speed Limiter
  • ECU Based Quick-shifting
  • Speedometer calibrations
  • and new features are added regularly.



Bench ECU Flashing Kit Includes: 

  • FTdataLink ECU Interface USB Cable
  • Bench Flashing Harness to flash your ECU outside of the bike
  • Power Supply for Bench flashing



We believe everyone deserves the same tuning technology that until now was reserved for factory riders. With our software you can remove the restrictions that the factory must put in place to meet strict street vehicle guidelines. By flashing your ECU you are able to tune your bike without interfering with critical correction factors resulting in smoother power gains than ever before possible.This product is for RACE USE ONLY! The included software will automatically update as new features are added!

Item #: FT-BNKT1
Condition: New
Price: $450.00

Qty:

Description:
BIKE SIDE Flash Tune Data-Link ECU Flashing Kit : Your bike already has a standalone ECU and now you can get the tools to program it! There is no longer any need to send away your ECU!  See bike fitments for the different types of setups below- Thank you. Scroll down for in-depth kit information. 

Fitment:

  • Yamaha R1 2007-2008
  • Yamaha R6 2006-2007
  • Super Tenere 2012-2013 (BIKE SIDE HARNESS ONLY)


This Interface allows you to easily adjust the following!

  • Remove ECU Restrictions
  • Engine Braking adjustments
  • High Load Fuel Maps (with PC3 and PC5 map importing)
  • Low Load (cruising) Fuel Maps
  • Fuel Injector Proportioning
  • Ignition Timing
  • Immobilizer Function
  • Cooling Fan Temps
  • Rev-Limiter Control
  • Remove Top Speed Limiter
  • ECU Based Quick-shifting
  • Speedometer calibrations
  • and new features are added regularly.


Data-Link ECU Flashing Kit Includes:
  • FTdataLink ECU Interface USB Cable
  • Bike-side programming harness to permanently install on your bike

We believe everyone deserves the same tuning technology that until now was reserved for factory riders. With our software you can remove the restrictions that the factory must put in place to meet strict street vehicle guidelines. By flashing your ECU you are able to tune your bike without interfering with critical correction factors resulting in smoother power gains than ever before possible.This product is for RACE USE ONLY! The included software will automatically update as new features are added!
Item #: FT-FTDL1
Condition: New
Price: $380.00

Qty:

Description:
 
The Kawasaki ZX636r 2013-2017 Flash Tune Data-Link ECU Flashing Kits : Your bike already has a standalone ECU and now you can get the tools to program it! There is no longer any need to send away your ECU! Note: Bench kit and the seperate listing bike side kit do the same thing but one tunes off the bike and the other attaches to the bike. Scroll down for indepth kit information.

Fitment:

  • Kawasaki ZX636r 2013-2017


This Interface allows you to easily adjust the following!

  • Remove ECU Restrictions
  • Engine Braking adjustments
  • High Load Fuel Maps (with PC3 and PC5 map importing)
  • Low Load (cruising) Fuel Maps
  • Fuel Injector Proportioning
  • Ignition Timing
  • Immobilizer Function
  • Cooling Fan Temps
  • Rev-Limiter Control
  • Remove Top Speed Limiter
  • ECU Based Quick-shifting
  • Speedometer calibrations
  • and new features are added regularly.


Bench ECU Flashing Kit Includes:
  • FTdataLink ECU Interface USB Cable
  • Bench Flashing Harness to flash your ECU outside of the bike
  • Power Supply for Bench flashing


We believe everyone deserves the same tuning technology that until now was reserved for factory riders. With our software you can remove the restrictions that the factory must put in place to meet strict street vehicle guidelines. By flashing your ECU you are able to tune your bike without interfering with critical correction factors resulting in smoother power gains than ever before possible.This product is for RACE USE ONLY! The included software will automatically update as new features are added!
Item #: FT-BNKT12
Condition: New
Price: $450.00

Qty:

Description:
 
Flash Tune Data-Link ECU Flashing Kits : Your bike already has a standalone ECU and now you can get the tools to program it! There is no longer any need to send away your ECU! Select your desired options from the pull down menu. See bike fitments for the different types of setups below. Scroll down for indepth kit information.

Fitment:

  • Yamaha R6 2006-2007


This Interface allows you to easily adjust the following!

  • Remove ECU Restrictions
  • Engine Braking adjustments
  • High Load Fuel Maps (with PC3 and PC5 map importing)
  • Low Load (cruising) Fuel Maps
  • Fuel Injector Proportioning
  • Ignition Timing
  • Immobilizer Function
  • Cooling Fan Temps
  • Rev-Limiter Control
  • Remove Top Speed Limiter
  • ECU Based Quick-shifting
  • Speedometer calibrations
  • and new features are added regularly.


Bench ECU Flashing Kit Includes:
  • FTdataLink ECU Interface USB Cable
  • Bench Flashing Harness to flash your ECU outside of the bike
  • Power Supply for Bench flashing


We believe everyone deserves the same tuning technology that until now was reserved for factory riders. With our software you can remove the restrictions that the factory must put in place to meet strict street vehicle guidelines. By flashing your ECU you are able to tune your bike without interfering with critical correction factors resulting in smoother power gains than ever before possible.This product is for RACE USE ONLY! The included software will automatically update as new features are added!
Item #: FT-BNKT14
Condition: New
Price: $450.00

Qty:

Description:

Flash Tune Data-Link ECU Flashing Kits : Your bike already has a standalone ECU and now you can get the tools to program it! There is no longer any need to send away your ECU! Note: The "Bench" kit listed here and separate listed "Bike Side" do the exact same thing. The bike side kits permanently mounts a small harness to the side of the bike and the bench kits requires removing the ecu and tuning at the computer. Scroll down for in-depth kit information. 

Fitment: 

  • Yamaha R1 2009-2014



This Interface allows you to easily adjust the following! 

  • Remove ECU Restrictions
  • Engine Braking adjustments
  • High Load Fuel Maps (with PC3 and PC5 map importing)
  • Low Load (cruising) Fuel Maps
  • Fuel Injector Proportioning
  • Ignition Timing
  • Immobilizer Function
  • Cooling Fan Temps
  • Rev-Limiter Control
  • Remove Top Speed Limiter
  • ECU Based Quick-shifting
  • Speedometer calibrations
  • and new features are added regularly.



Bench ECU Flashing Kit Includes: 

  • FTdataLink ECU Interface USB Cable
  • Bench Flashing Harness to flash your ECU outside of the bike
  • Power Supply for Bench flashing



We believe everyone deserves the same tuning technology that until now was reserved for factory riders. With our software you can remove the restrictions that the factory must put in place to meet strict street vehicle guidelines. By flashing your ECU you are able to tune your bike without interfering with critical correction factors resulting in smoother power gains than ever before possible.This product is for RACE USE ONLY! The included software will automatically update as new features are added!

Item #: FT-BNKT2
Condition: New
Price: $450.00

Qty:

Description:
 
Flash Tune Data-Link ECU Flashing Kits : Your bike already has a standalone ECU and now you can get the tools to program it! There is no longer any need to send away your ECU! Select your desired options from the pull down menu. See bike fitments for the different types of setups below. When ordering please include your bike's ECU # in the notes section at checkout to insure the proper setup is sent to you. Thank you. Scroll down for indepth kit information.

Fitment:

  • Yamaha R6 2008-2016 (BIKE SIDE HARNESS ONLY * see seperate listing for the bench kits for this bike)


This Interface allows you to easily adjust the following!

  • Remove ECU Restrictions
  • Engine Braking adjustments
  • High Load Fuel Maps (with PC3 and PC5 map importing)
  • Low Load (cruising) Fuel Maps
  • Fuel Injector Proportioning
  • Ignition Timing
  • Immobilizer Function
  • Cooling Fan Temps
  • Rev-Limiter Control
  • Remove Top Speed Limiter
  • ECU Based Quick-shifting
  • Speedometer calibrations
  • and new features are added regularly.


Data-Link ECU Flashing Kit Includes:
  • FTdataLink ECU Interface USB Cable
  • Bike-side programming harness to permanently install on your bike


We believe everyone deserves the same tuning technology that until now was reserved for factory riders. With our software you can remove the restrictions that the factory must put in place to meet strict street vehicle guidelines. By flashing your ECU you are able to tune your bike without interfering with critical correction factors resulting in smoother power gains than ever before possible.This product is for RACE USE ONLY! The included software will automatically update as new features are added!
Item #: FT-FTDL3
Condition: New
Price: $380.00

Qty:

Description:
FlashTune ECU Type 4 GSX-R 600 / 750 / 1000 / SV1000 / FZ1 / FZ8, / ZX6 / EX300 / EX400 .Flash Tune Data-Link ECU Flashing Kits : Your bike already has a standalone ECU and now you can get the tools to program it! There is no longer any need to send away your ECU! Scroll down for indepth kit information. 

Fitment:

  • NOTE: (BIKE SIDE HARNESS ONLY * see separate listing for the bench kits for these bikes)
  • GSX-R 600 04-19
  • GSX-R 750 04-19
  • GSX-R 1000 05-16
  • SV1000 05-08
  • FZ1 06-09
  • FZ8 11-14
  • ZX6 09-14
  • EX300 13-14
  • EX400 18-19
  • Ninja 650 18-19
  • Z650 18-19


This Interface allows you to easily adjust the following!

  • Remove ECU Restrictions
  • Engine Braking adjustments
  • High Load Fuel Maps (with PC3 and PC5 map importing)
  • Low Load (cruising) Fuel Maps
  • Fuel Injector Proportioning
  • Ignition Timing
  • Immobilizer Function
  • Cooling Fan Temps
  • Rev-Limiter Control
  • Remove Top Speed Limiter
  • ECU Based Quick-shifting
  • Speedometer calibrations
  • and new features are added regularly.


Data-Link ECU Flashing Kit Includes:
  • FTdataLink ECU Interface USB Cable
  • Bike-side programming harness to permanently install on your bike (1 user license mates to single ECU)


We believe everyone deserves the same tuning technology that until now was reserved for factory riders. With our software you can remove the restrictions that the factory must put in place to meet strict street vehicle guidelines. By flashing your ECU you are able to tune your bike without interfering with critical correction factors resulting in smoother power gains than ever before possible.This product is for RACE USE ONLY! The included software will automatically update as new features are added!
Item #: FT-FTDL4
Condition: New
Price: $380.00

Qty:

Description:
 
Flash Tune Data-Link (Bike side) ECU Flashing Kits for the Kawasaki ZX636r 2013-2016 : Your bike already has a standalone ECU and now you can get the tools to program it! There is no longer any need to send away your ECU! Note: Bike side and the separate listing bench tuning kit do the same thing but one tunes off the bike and the other attaches to the bike. Scroll down for indepth kit information.

Fitment:

  • Kawasaki ZX636r 2013-2016


This Interface allows you to easily adjust the following!

  • Remove ECU Restrictions
  • Engine Braking adjustments
  • High Load Fuel Maps (with PC3 and PC5 map importing)
  • Low Load (cruising) Fuel Maps
  • Fuel Injector Proportioning
  • Ignition Timing
  • Immobilizer Function
  • Cooling Fan Temps
  • Rev-Limiter Control
  • Remove Top Speed Limiter
  • ECU Based Quick-shifting
  • Speedometer calibrations
  • and new features are added regularly.


Data-Link ECU Flashing Kit Includes:
  • FTdataLink ECU Interface USB Cable
  • Bike-side programming harness to permanently install on your bike


We believe everyone deserves the same tuning technology that until now was reserved for factory riders. With our software you can remove the restrictions that the factory must put in place to meet strict street vehicle guidelines. By flashing your ECU you are able to tune your bike without interfering with critical correction factors resulting in smoother power gains than ever before possible.This product is for RACE USE ONLY! The included software will automatically update as new features are added!
Item #: FT-FTDL6
Condition: New
Price: $380.00

Qty:

Description:
 
Flash Tune Data-Link (Bike side) ECU Flashing Kits for the all new Kawasaki ZX6 / 636 2005-2008 : Your bike already has a standalone ECU and now you can get the tools to program it! There is no longer any need to send away your ECU! Note: Bike side and the separate listing bench tuning kit do the same thing but one tunes off the bike and the other attaches to the bike. Scroll down for in-depth kit information.

Fitment:

  • Kawasaki ZX6 / 636 2005-2008


This Interface allows you to easily adjust the following!

  • Remove ECU Restrictions
  • Engine Braking adjustments
  • High Load Fuel Maps (with PC3 and PC5 map importing)
  • Low Load (cruising) Fuel Maps
  • Fuel Injector Proportioning
  • Ignition Timing
  • Immobilizer Function
  • Cooling Fan Temps
  • Rev-Limiter Control
  • Remove Top Speed Limiter
  • ECU Based Quick-shifting
  • Speedometer calibrations
  • and new features are added regularly.


Data-Link ECU Flashing Kit Includes:
  • FTdataLink ECU Interface USB Cable
  • Bike-side programming harness to permanently install on your bike


We believe everyone deserves the same tuning technology that until now was reserved for factory riders. With our software you can remove the restrictions that the factory must put in place to meet strict street vehicle guidelines. By flashing your ECU you are able to tune your bike without interfering with critical correction factors resulting in smoother power gains than ever before possible.This product is for RACE USE ONLY! The included software will automatically update as new features are added!


This Interface allows you to easily adjust the following!

  • Remove ECU Restrictions
  • Engine Braking adjustments
  • High Load Fuel Maps (with PC3 and PC5 map importing)
  • Low Load (cruising) Fuel Maps
  • Fuel Injector Proportioning
  • Ignition Timing
  • Immobilizer Function
  • Cooling Fan Temps
  • Rev-Limiter Control
  • Remove Top Speed Limiter
  • ECU Based Quick-shifting
  • Speedometer calibrations
  • and new features are added regularly.


Data-Link ECU Flashing Kit Includes:
  • FTdataLink ECU Interface USB Cable
  • Bike-side programming harness to permanently install on your bike


Bench ECU Flashing Kit Includes:
  • FTdataLink ECU Interface USB Cable
  • Bench Flashing Harness to flash your ECU outside of the bike
  • Power Supply for Bench flashing


We believe everyone deserves the same tuning technology that until now was reserved for factory riders. With our software you can remove the restrictions that the factory must put in place to meet strict street vehicle guidelines. By flashing your ECU you are able to tune your bike without interfering with critical correction factors resulting in smoother power gains than ever before possible.This product is for RACE USE ONLY! The included software will automatically update as new features are added!
Item #: FT-FTDL7
Condition: New
Price: $380.00

Qty:

Description:
 
The Kawasaki ZX6 / 636 2005-2008 Flash Tune Data-Link ECU Flashing Kits : Your bike already has a standalone ECU and now you can get the tools to program it! There is no longer any need to send away your ECU! Note: Bench kit and the separate listing bike side kit do the same thing but one tunes off the bike and the other attaches to the bike. Scroll down for in-depth kit information.

Fitment:

  • Kawasaki ZX6 / 636 2005-2008


This Interface + software allows you to easily adjust the following!

  • Remove ECU Restrictions
  • Engine Braking adjustments
  • High Load Fuel Maps (with PC3 and PC5 map importing)
  • Low Load (cruising) Fuel Maps
  • Fuel Injector Proportioning
  • Ignition Timing
  • Immobilizer Function
  • Cooling Fan Temps
  • Rev-Limiter Control
  • Remove Top Speed Limiter
  • ECU Based Quick-shifting
  • Speedometer calibrations
  • and new features are added regularly.


Bench ECU Flashing Kit Includes:
  • FTdataLink ECU Interface USB Cable
  • Bench Flashing Harness to flash your ECU outside of the bike
  • Power Supply for Bench flashing


We believe everyone deserves the same tuning technology that until now was reserved for factory riders. With the FTEcu software you can remove the restrictions that the factory must put in place to meet strict street vehicle guidelines. By flashing your ECU you are able to tune your bike without interfering with critical correction factors resulting in smoother power gains than ever before possible.This product is for RACE USE ONLY! The included software will automatically update as new features are added!
Item #: FT-BNKT8
Condition: New
Price: $450.00

Qty:

Description:
 
Flash Tune Data-Link (Bike side) ECU Flashing Kits for the 2015-2017 Yamaha FZ-07,  2018-2019 MT-07 , XSR700 2016-2019and 2018-2019 R3 : Your bike already has a standalone ECU and now you can get the tools to program it! There is no longer any need to send away your ECU! Note: Bike side and the seperate listing bench tuning kit do the same thing but one tunes off the bike and the other attaches to the bike. Scroll down for indepth kit information.

Fitment:

  • Yamaha FZ-07 2015-2017 / MT-07 2018-2019 / XSR700 2016-2019 / R3 2018-2019


This Interface allows you to easily adjust the following!

  • Remove ECU Restrictions
  • High Load Fuel Maps (with PC3 and PC5 map importing)
  • Low Load (cruising) Fuel Maps and Bias Mapping
  • Cylinder Specific Ignition Timing
  • Cooling Fan Temp Adjustment
  • Disable Injector Decel cut-off
  • and new features are added regularly.


Data-Link ECU Flashing Bike Side Kit Includes:
  • FTdataLink ECU Interface USB Cable
  • Bike-side programming harness to permanently install on your bike
  • FT ECU License to allow unlimited flashes for a single ecu


We believe everyone deserves the same tuning technology that until now was reserved for factory riders. With the FTEcu software you can remove the restrictions that the factory must put in place to meet strict street vehicle guidelines. By flashing your ECU you are able to tune your bike without interfering with critical correction factors resulting in smoother power gains than ever before possible.This product is for RACE USE ONLY! The included software will automatically update as new features are added!
Item #: FT-FTDL9
Condition: New
Price: $380.00

Qty:

Description:
The 2017 CBR1000rr Flash Tune Data-Link ECU Flashing Kits : Your bike already has a standalone ECU and now you can get the tools to program it! There is no longer any need to send away your ECU! Note: Bench kit and the separate listing bike side kit do the same thing but, the bench kit tunes by removing the ECU from the bike and connecting it to a computer. The separately listed bike side kit mounts a small harness to the bike permanently to access tuning. Scroll down for in depth kit information.
 
 
Fitment:

  • Honda CBR1000rr 2017

This Interface allows you to easily adjust the following! 
 
  • Remove ECU Restrictions
  • High Load Fuel Maps
  • Low Load (cruising) Fuel Maps and Bias Mapping
  • Cylinder Specific Ignition Timing by Gear
  • Throttle by Wire Adjustments
  • See screen shot for list of current features

Bench ECU Flashing Kit Includes:

  • FTdataLink ECU Interface USB Cable
  • Bench Flashing Harness to flash your ECU outside of the bike
  • Power Supply for Bench flashing
  • FT ECU License to allow unlimited flashes for a single ecu
We believe everyone deserves the same tuning technology that until now was reserved for factory riders. With the FTEcu software you can remove the restrictions that the factory must put in place to meet strict street vehicle guidelines. By flashing your ECU you are able to tune your bike without interfering with critical correction factors resulting in smoother power gains than ever before possible.This product is for RACE USE ONLY! The included software will automatically update as new features are added!
Item #: FT-4P_BNKT_09
Condition: New
Price: $450.00

Qty:

Description:
 
Flash Tune Data-Link (Bike side) ECU Flashing Kits for the 2017 CBR1000rr : Your bike already has a standalone ECU and now you can get the tools to program it! There is no longer any need to send away your ECU! Note: Bike side and the separate listing bench tuning kit do the same thing but, the bike side kit mounts a small harness to the bike permanently to access tuning. Bench kits tune by removing the ECU from the bike and connecting it to a computer Scroll down for in depth kit information.

Fitment:
  • Honda CBR1000rr 2017

This Interface allows you to easily adjust the following! 
  • Remove ECU Restrictions
  • High Load Fuel Maps
  • Low Load (cruising) Fuel Maps and Bias Mapping
  • Cylinder Specific Ignition Timing by Gear
  • Throttle by Wire Adjustments
  • See screen shot for list of current features
Data-Link ECU Flashing Bike Side Kit Includes:
  • FTdata Link ECU Interface USB Cable
  • Bike-side programming harness to permanently install on your bike
  • FT ECU License to allow unlimited flashes for a single ecu

We believe everyone deserves the same tuning technology that until now was reserved for factory riders. With the FTEcu software you can remove the restrictions that the factory must put in place to meet strict street vehicle guidelines. By flashing your ECU you are able to tune your bike without interfering with critical correction factors resulting in smoother power gains than ever before possible.This product is for RACE USE ONLY! The included software will automatically update as new features are added!
 
Item #: FT-4P_FTDL_05
Condition: New
Price: $380.00

Qty:

Description:
The 2019 Kawasaki ZX-6R and 2017-2019 Z900 Tune Data-Link ECU Flashing Kits : Your bike already has a standalone ECU and now you can get the tools to program it! There is no longer any need to send away your ECU! Note: Bench kit and the separate listing bike side kit do the same thing but one tunes off the bike and the other attaches to the bike. Scroll down for in depth kit information.Thank you. 

Fitment:

  • Kawasaki ZX-6R 2019 + Kawasaki Z900 2017-2019


This Interface allows you to easily adjust the following! 
 
  • Remove ECU Restrictions
  • Engine Braking adjustments
  • High Load Fuel Maps (with PC3 and PC5 map importing)
  • Low Load (cruising) Fuel Maps
  • Fuel Injector Proportioning
  • Ignition Timing
  • Immobilizer Function
  • Cooling Fan Temps
  • Rev-Limiter Control
  • Remove Top Speed Limiter
  • ECU Based Quick-shifting
  • and new features are added regularly.

Bench ECU Flashing Kit Includes:
  • FTdataLink ECU Interface USB Cable
  • Bench Flashing Harness to flash your ECU outside of the bike
  • Power Supply for Bench flashing
  • FT ECU License to allow unlimited flashes for a single ecu


We believe everyone deserves the same tuning technology that until now was reserved for factory riders. With the FTEcu software you can remove the restrictions that the factory must put in place to meet strict street vehicle guidelines. By flashing your ECU you are able to tune your bike without interfering with critical correction factors resulting in smoother power gains than ever before possible.This product is for RACE USE ONLY! The included software will automatically update as new features are added!
Item #: FT-BNKT23
Condition: New
Price: $450.00

Qty:

Description:
Replacement FTEcu bike side harness for the 2019 Kawasaki ZX-6R. These replacement harness are good when you have multiple bikes and just one tuning cable (ZX-6R 2019 requires a 6 pin tuning cable) or when you need replacement harnesses. 

Fitment:
  • Kawasaki ZX-6R 2019
Item #: FT-BSHA13
Condition: New
Price: $49.95
Qty:

Description:
 
FTEcu Yamaha R1 15-16 / R1M 15-16 / R1S 2016 (WILL NOT FIT THE 2017 see separate listing) ECU Based Auto-Blipper Kit. Works great with the "GravesSpec" FTEcu map and when activated allows for smooth downshifting without using the clutch!

With this kit and your flashed ECU you can downshift smoother than would otherwise be possible without pulling the clutch! The latest generation of R1 models is finally capable of producing smooth fast clutch-less downshifting! After three years of development we are proud to release the best auto-blipper available.

This system provides smoother clutch-less downshifting that rivals even the OEM’s like BMW and Ducati

This kit requires:
  • FTECU Flashing Kit and licensed ECU or the purchase of a mail-in ECU flashing service


This kit includes:
  • 1 Push Type QSS/Blip Shift Sensor
  • 1 Pull Type QSS/Blip Shift Sensor
  • The two sensors together will replace your OEM pull type sensor
  • QSS/Blipper Harness to connect your new sensors to your ECU (Select Stock or Kit Harness from the pull down menu).
  • Scratch-off Activation Card to authorize the auto-blipper to be used with your tuning license.


Fitment: Yamaha R1 2015-2016 / R1M 2015-2016 / R1S 2016 (WILL NOT FIT THE 2017 see separate listing)
Item #: FT-FTEJ-AB
Condition: New
Price: $400.00

Qty:

Description:
The 2018-2019 Kawasaki Ninja EX400 Tune Data-Link ECU Flashing Kits : Your bike already has a standalone ECU and now you can get the tools to program it! There is no longer any need to send away your ECU! Note: Bench kit and the separate listing bike side kit do the same thing but one tunes off the bike and the other attaches to the bike. Scroll down for in depth kit information.Thank you. 

Fitment:

  • Kawasaki Ninja EX400 2018-2019
  • Kawasaki Ninja 650 2018-2019
  • Kawasaki Z650 2018-2019


This Interface allows you to easily adjust the following! 
 
  • Remove ECU Restrictions
  • High Load Fuel Maps (with PC3 and PC5 map importing)
  • Low Load (cruising) Fuel Maps and Bias Mapping
  • Cylinder Specific Ignition Timing by Gear
  • Throttle by Wire Adjustments
  • Engine Braking Adjustments
  • Cooling Fan Temp Adjustment
  • Disable Injector Decel cut-off
  • and new features are added regularly.
  • See screen shot for list of current features
 

Bench ECU Flashing Kit Includes:
  • FTdataLink ECU Interface USB Cable
  • Bench Flashing Harness to flash your ECU outside of the bike
  • Power Supply for Bench flashing
  • FT ECU License to allow unlimited flashes for a single ecu


We believe everyone deserves the same tuning technology that until now was reserved for factory riders. With the FTEcu software you can remove the restrictions that the factory must put in place to meet strict street vehicle guidelines. By flashing your ECU you are able to tune your bike without interfering with critical correction factors resulting in smoother power gains than ever before possible.This product is for RACE USE ONLY! The included software will automatically update as new features are added!
Item #: FT-BNKT22
Condition: New
Price: $450.00

Qty:

Description:

FTECU’s Kawasaki Ninja 400 + Ninja 650 + Z900 ABS Delete allows you to completely remove the factory ABS system without triggering error codes on your bike’s dashboard.

For off-road track use ONLY!


This unit allows you to remove the ABS pump assembly and save much-needed weight for race applications where the ABS is not needed. Weight reduction is slightly more than three pounds (aftermarket brake lines not included).

Fitment: Kawasaki Ninja 400 2018-2019 + Ninja 650 2018-2019 + Z900 2017-2019

Item #: FTKAW_ABS_DEL_2
Condition: New
Price: $249.00

Qty:

Description: FTECU’s Kawasaki ZX-6R / ZX-10R / H2 ABS Delete allows you to completely remove the factory ABS system without triggering error codes on your bike’s dashboard.

For off-road track use ONLY!


This unit allows you to remove the ABS pump assembly and save much-needed weight for race applications where the ABS is not needed. Weight reduction is slightly more than three pounds (aftermarket brake lines not included).

Fitment: Kawasaki ZX-6R 2019 + ZX-10R 2016-2019 + Kawasaki HZ 2016 +
Item #: FTKAW_ABS_DEL_1
Condition: New
Price: $249.00

Qty:

Description: FTECU Based Quick Shifter Replacement Sensor. The Flash Tune long awaited PUSH/PULL type sensor is now available!
This sensor works in PUSH/PULL (for quickshift configuration for GP or Standard Shift Pattern). This sensor also works in PUSH/PULL (for autoblip configuration for GP or Standard Shift Pattern) Manufactured by us here in the USA.

Note: Shift Sensor Connector with Red wire is for PUSH switch
Note: Shift Sensor Connector with Black wire is for PULL switch
This Sensor requires rods and a harness to be used on a bike. You will also need an FTEcu flash tune kit to active the shifting all sold separately.
Item #: FTE_QS2
Condition: New
Price: $220.00

Qty:

Description:
 
FTEcu R1 / FZ10 / MT-10 R6 - (6-pin) Replacement Bike Harnesses for use with Denso FT Datalink USB cables. Great for customers with a bike tuning kit wanting to upgrade to bike side access or when having multiple bikes. 

Fitment:

  • Yamaha R1 2015-2018 / R1M 2015-2018 / R1S 2016-2018 / Yamaha FZ10 2017 / R6 2017-2018 / MT-10 2018


Item #: FT-BSHA08
Condition: New
Price: $49.95
Qty:

Description:
 
FTEcu 2017 Yamaha R6 ABS Delete Plug now allows you remove the factory ABS system completely without error codes on your R6's dashboard. For off-road track use ONLY! This fuse plug will allow you to remove the ABS pump assembly while saving much needed weight for race applications when the ABS is not needed. Weight reduction is slightly over 3 lbs. saving (aftermarket brake lines not included). 

Fitment:

  • Yamaha R6 2017
Item #: FT-YAM_R6_ABS
Condition: New
Price: $250.00

Qty:

Description:
 
Flash Tune Data-Link ECU Flashing Kits : Your bike already has a standalone ECU and now you can get the tools to program it! There is no longer any need to send away your ECU! Note: This "Bike Side" kit listed here and separate listing for the "Bench Kit" do the exact same thing. The bike side kits permanently mounts a small harness to the side of the bike and the bench kits require removing the ecu and tune at the computer. Scroll down for in-depth kit information.

Fitment:

  • Yamaha R1 2009-2014


This Interface allows you to easily adjust the following!

  • Remove ECU Restrictions
  • Engine Braking adjustments
  • High Load Fuel Maps (with PC3 and PC5 map importing)
  • Low Load (cruising) Fuel Maps
  • Fuel Injector Proportioning
  • Ignition Timing
  • Immobilizer Function
  • Cooling Fan Temps
  • Rev-Limiter Control
  • Remove Top Speed Limiter
  • ECU Based Quick-shifting
  • Speedometer calibrations
  • and new features are added regularly


Bench ECU Flashing Kit Includes:
  • FTdataLink ECU Interface USB Cable
  • Bench Flashing Harness to flash your ECU outside of the bike
  • Power Supply for Bench flashing


We believe everyone deserves the same tuning technology that until now was reserved for factory riders. With our software you can remove the restrictions that the factory must put in place to meet strict street vehicle guidelines. By flashing your ECU you are able to tune your bike without interfering with critical correction factors resulting in smoother power gains than ever before possible.This product is for RACE USE ONLY! The included software will automatically update as new features are added!
Item #: FT-FTDL2
Condition: New
Price: $380.00

Qty:

Description: Flash Tune Data-Link : (Bike side) ECU Flashing Kits for the 2017-2018 Yamaha R6 / 2015-2018 Yamaha R1 / R1M / R1S + 2017 Yamaha FZ10 + 2018 MT-10 . Your bike already has a standalone ECU and now you can get the tools to program it! There is no longer any need to send away your ECU! Note: Bike side and the separate listing bench tuning kit do the same thing but one tunes off the bike and the other attaches to the bike. Scroll down for in-depth kit information.

This Interface allows you to easily adjust the following!

Remove ECU Restrictions

High Load Fuel Maps (with PC5 map importing)
Low Load (cruising) Fuel Maps and Bias Mapping
Fuel Injector Proportioning
Engine Braking adjustments
Cylinder Specific Ignition Timing
Variable Stack RPM Adjustment
Cooling Fan Temp Adjustment
Remove Top Speed Limiter
Steering Damper Elimination
EXUP Valve Elimination
Force AIS Valve Closed
*This kit is also compatible with the R1M and R1S.
Item #: FT-FTDL8
Condition: New
Price: $380.00

Qty:

Description:
 
Flash Tune Data-Link ECU Flashing Kits : Your bike already has a standalone ECU and now you can get the tools to program it! There is no longer any need to send away your ECU. Scroll down for in-depth kit information.

Fitment:

  • Yamaha FZ-07 2015-2017 / MT-07 2018-2019 / XSR900 2016-2019 / R3 2018-2019


This Interface allows you to easily adjust the following!

  • Remove ECU Restrictions
  • High Load Fuel Maps (with PC3 and PC5 map importing)
  • Low Load (cruising) Fuel Maps and Bias Mapping
  • Cylinder Specific Ignition Timing
  • Cooling Fan Temp Adjustment
  • Disable Injector Decel cut-off
  • and new features are added regularly.


Bench ECU Flashing Kit Includes:
  • FTdataLink ECU Interface USB Cable
  • Bench Flashing Harness to flash your ECU outside of the bike
  • Power Supply for Bench flashing
  • FT ECU License to allow unlimited flashes for a single ecu


We believe everyone deserves the same tuning technology that until now was reserved for factory riders. With our software you can remove the restrictions that the factory must put in place to meet strict street vehicle guidelines. By flashing your ECU you are able to tune your bike without interfering with critical correction factors resulting in smoother power gains than ever before possible.This product is for RACE USE ONLY! The included software will automatically update as new features are added!
Item #: FT-BNKT19
Condition: New
Price: $450.00

Qty:

Description:
 
FTEcu Yamaha Active Tune AFR Self Tuning ECU Kit. This Kit lets your FTECU equipped bike tune itself as you ride! Once installed and activated, the ActiveTune kit monitors the fuel mixture making fast and consistent changes to mitigate changing fuel requirements.

This breakthrough system replaces your inadequate stock O2 sensor with a proprietary FTECU lambda controller and the latest generation Bosch LSU 4.9 sensor.

This kit requires:

  • Data-Link ECU Flashing Kit ( bike harness required for tuning / data acquisition )
  • Exhaust with a standard 18×1.5 O2 sensor bung (optionally cylinder specific bungs)
  • Smog block-offs or disabled AIS valve (Graves Smog Block Off Part Numbers : R1 / FZ10 (all) /R6 (2017) = AB011 / FZ09 + XSR900 = AB015 / FZ07 (N/A) / MT07 (N/A) / XSR700 (N/A)


FTEcu Yamaha Active Tune


This kit includes:

  • 1 FTECU YAM-01 Lambda Controller
  • 1 Bosch LSU4.9 wideband O2 sensor
  • 1 Product Activation Card


Model Fitment:

  • Yamaha R1 / R1M / R1S 2015-2018 Note: You will need an 18x1.5mm Lamda Collar in your R1 exhaust for this installation this does not come on the stock exhausts but standard on Graves Cat Eliminator and Full Exhaust Systems.
  • Yamaha R6 2017-2018 Note:  You will need an 18x1.5mm Lamda Collar in your R6 exhaust for this installation this does not come on the stock exhausts but standard on Graves Full Exhaust Systems.
  • Yamaha FZ10 2017-2018 Note: You will need an 18x1.5mm Lamda Collar in your FZ10 exhaust for this installation this does not come on the stock exhausts but standard on Graves Cat Eliminator and Full Exhaust Systems.
  • Yamaha FZ-09 2014-2017 Note: This will work with the OEM exhaust 18x1.5mm Lamda Collar or All Graves Full Exhaust Systems for this model.
  • Yamaha XSR900 2016-2017 Note: This will work with the OEM exhaust 18x1.5mm Lamda Collar or All Graves Full Exhaust Systems for this model.
  • Yamaha FZ-07 2015-2017 Note: This will work with the OEM exhaust 18x1.5mm Lamda Collar or All Graves Full Exhaust Systems for this model.
  • Yamaha MT-09 2015 + 
  • Yamaha MT-07 2015 +


Item #: FT_YAM_LCAT
Condition: New
Price: $385.00

Qty:

Description: Flash Tune ECU Based Quick shifter Kits for the 2017 Yamaha FZ10 / 2018 Yamaha MT-10

Use this kit alongside your FTEcu flashed ECU to activate clutchless shifting without letting off the throttle ! This kit includes everything you will need to utilize your FTecu flashed ECU’s Quick shifter Input. Use the pull down selection menu to select from "standard" - pulling up on the shifter to upshift or "gp" - pushing down on the shifter to upshift.
Item #: FT-QS10_AC
Condition: New
Price: $450.00

Qty:

Description:

FTEcu Yamaha R1 / R1M 2015-2017 ABS Delete Plus now allows you remove the factory ABS system completely without losing electronic assists. For off-road track use ONLY! This unit allows you to remove the ABS pump assembly while saving much needed weight for race applications when the ABS is not needed. Weight reduction is slightly over 3 lbs. saving (aftermarket brake lines not included).
 
Note: If you have an R1M the ABS Delete plus will be required if retaining electronic suspension. This ABS Delete plus will show no errors and is also fully compatible with the CCU data logger.
 
Fitment: 2015 - 2017 Yamaha R1 / R1M

Item #: FT-R1-ABS_PLUS
Condition: New
Price: $349.99

Qty:

Description:
 
FTEcu Yamaha R1 2017 / R1M 2017 / R1S 2017-2019 (See separate listing for 2015-2016 models) ECU Based Auto-Blipper Kit. Works great with the "GravesSpec" FTEcu map and when activated allows for smooth up-shifting and downshifting without using the clutch!

With this kit and your flashed ECU you can downshift smoother than would otherwise be possible without pulling the clutch! The latest generation of R1 models is finally capable of producing smooth fast clutch-less downshifting! After three years of development we are proud to release the best auto-blipper available.

This system provides smoother clutch-less downshifting that rivals even the OEM’s like BMW and Ducati

This kit requires:
  • FTECU Flashing Kit and licensed ECU or the purchase of a mail-in ECU flashing service


This kit includes:
  • 1 Push Type QSS/Blip Shift Sensor
  • 1 Pull Type QSS/Blip Shift Sensor
  • The two sensors together will replace your OEM pull type sensor
  • QSS/Blipper Harness to connect your new sensors to your ECU (Select Stock or Kit Harness from the pull down menu).
  • Scratch-off Activation Card to authorize the auto-blipper to be used with your tuning license.


Fitment: Yamaha R1 2017 / R1M 2017 / R1S 2017-2019 (See separate listing for 2015-2016 models)
Item #: FTEJ_AB_17R1S
Condition: New
Price: $400.00

Qty:

Description:
The 2015-2017 Yamaha R3 Tune Data-Link ECU Flashing Kits : Your bike already has a standalone ECU and now you can get the tools to program it! There is no longer any need to send away your ECU! Note: Bench kit and the separate listing bike side kit do the same thing but one tunes off the bike and the other attaches to the bike. Scroll down for in depth kit information.Thank you. 

Fitment:

  • Yamaha R3 2015-2017


This Interface allows you to easily adjust the following! 
 
  • Remove ECU Restrictions
  • High Load Fuel Maps (with PC3 and PC5 map importing)
  • Low Load (cruising) Fuel Maps and Bias Mapping
  • Cylinder Specific Ignition Timing by Gear
  • Throttle by Wire Adjustments
  • Engine Braking Adjustments
  • Cooling Fan Temp Adjustment
  • Disable Injector Decel cut-off
  • and new features are added regularly.
  • See screen shot for list of current features
 

Bench ECU Flashing Kit Includes:
  • FTdataLink ECU Interface USB Cable
  • Bench Flashing Harness to flash your ECU outside of the bike
  • Power Supply for Bench flashing
  • FT ECU License to allow unlimited flashes for a single ecu


We believe everyone deserves the same tuning technology that until now was reserved for factory riders. With the FTEcu software you can remove the restrictions that the factory must put in place to meet strict street vehicle guidelines. By flashing your ECU you are able to tune your bike without interfering with critical correction factors resulting in smoother power gains than ever before possible.This product is for RACE USE ONLY! The included software will automatically update as new features are added!
Item #: FT-4P_BNKT_08
Condition: New
Price: $450.00

Qty:

Description: Flash Tune Data-Link (Bike side) ECU Flashing Kits for the 2015-2017 Yamaha R3 : Your bike already has a standalone ECU and now you can get the tools to program it! There is no longer any need to send away your ECU! Note: Bike side kit attaches to the bike to allow lap top access with the included 4pin tuning cable.


This Interface allows you to easily adjust the following!

Remove ECU Restrictions
High Load Fuel Maps (with PC3 and PC5 map importing)
Low Load (cruising) Fuel Maps and Bias Mapping
Cylinder Specific Ignition Timing
Cooling Fan Temp Adjustment
Disable Injector Decel cut-off
and new features are added regularly.



Data-Link ECU Flashing Bike Side Kit Includes:

FTdataLink ECU Interface USB Cable
Bike-side programming harness to permanently install on your bike
FT ECU License to allow unlimited flashes for a single ecu



We believe everyone deserves the same tuning technology that until now was reserved for factory riders. With the FTEcu software you can remove the restrictions that the factory must put in place to meet strict street vehicle guidelines. By flashing your ECU you are able to tune your bike without interfering with critical correction factors resulting in smoother power gains than ever before possible.This product is for RACE USE ONLY! The included software will automatically update as new features are added!
Item #: FT-4P_FTDL_06
Condition: New
Price: $380.00

Qty:

Description:
 
FTEcu Yamaha R6 2017-2019 : ECU Based Auto-Blipper Kit. Works great with the "GravesSpec" FTEcu map and when activated not only allows clutch up-shifting but adds smooth downshifting without using the clutch!

With this kit and your flashed ECU you can downshift smoother than would otherwise be possible without pulling the clutch! The latest generation of R6 models is finally capable of producing smooth fast clutch-less downshifting! After five years of development we are proud to release the best auto-blipper available.

This system provides smoother clutch-less downshifting that rivals even the OEM’s like BMW and Ducati

This kit requires:
  • FTECU Flashing Kit and licensed ECU

This kit includes:
 
  • 1 Push Type QSS/Blip Shift Sensor
  • 1 Pull Type QSS/Blip Shift Sensor
  • 1 Type A shift rod
  • The two sensors together will replace your OEM pull type sensor
  • QSS/Blipper Harness to connect your new sensors to your ECU (Stock or Kit Harness).
  • Scratch-off Activation Card to authorize the auto-blipper to be used with your tuning license.

Fitment: Yamaha R6 2017-2019
Item #: FTEJ_AB_R6
Condition: New
Price: $400.00

Qty:

Description:
 
FTEcu ZX10r KDS to OBDII Diagnotic Harness Adapter for the 2016+ Models. This item is included with all 2016-2019 ZX-10R tuning kits.

This harness allows you to use a standard OBD-II automotive scanner with your 16+ Kawasaki ZX10R. This is a tool designed to clear any error codes that are common occurrences. NOTE: Must be used along with a diagnostic tool like listed below and is purchased separately.

ANY CAN enabled auto diagnostic scanner should work see example: Example $16 via Amazon

Item #: FT-OBD-KDS-ADAP
Condition: New
Price: $49.95
Qty:

Description:
 
Flash Tune ECU Based Auto-Blipper Kit for the 2016-2019 Kawasaki ZX10-R

With this kit and your flashed ECU you can downshift smoother than would otherwise be possible without pulling the clutch! The latest generation of the ZX10r models is finally capable of producing smooth fast clutch-less downshifting! After four years of development we are proud to release the best auto-blipper available. This system provides positive feeling clutch-less downshifting that rivals even the OEM’s like BMW and Ducati

Note: This kit requires:
  • FTECU Flashing Kit and licensed ECU
  • This kit requires no additional hardware


This feature will be sent as an activation code on your invoice within 1 business day.

Fitment : Kawasaki ZX10r 2016-2019

Item #: FT-16ZX10_AB
Condition: New
Price: $400.00

Qty:

Description: ECU-Based Quickshifter Kit for the 2019 Kawasaki ZX-6R.
With this kit and your flashed ECU you can up-shift without letting off the throttle or pulling the clutch! This kit includes everything you will need to utilize your FTECU-flashed ECU’s Quickshifter Input. New dual sensors are now smaller and more reliable than ever! Manufactured by us here in the USA! Requires a bike side or bench tuning FTEcu flashing kit to activate the shifting within the tune.

Note: Shift sensor connector with Red wire is for PUSH switch, shift sensor connector with Black wire is for PULL switch. This means they eliminate the need to buy a specific push or pull sensor as these can be wired for either!

This kit includes:

QS sensor (PUSH/PULL).
Rod kit for your bike (cutting may be required to fit)
Harness to interface to your ECU.
Fitment: Kawasaki ZX-6R 2019
Item #: FT-QSJ15_CH
Condition: New
Price: $240.00

Qty:

Items 1-43 of 43