HHR Performance - Carbon Fiber
Carbon Fiber Fairings
Carbonin Carbon Fiber fairings are known around the professional world of racing for their incredibly durable Carbon Fiber motorcycle bodywork. These carbon fiber fairings are made to the highest standards required by professional race teams for perfect fitment and ease of removal and installation. They are pre-installed with Dzus fasteners, so they are ready to fit straight out of the box, saving you valuable time.
Wet Lay Carbon Fiber motorcycle bodywork is ultra-lightweight while also strong.
These carbon fiber motorcycle fairings are used by teams in World Superbikes, Moto America, BSB, IDM, World Endurance Championship, and teams competing in the Isle of Man TT.
Browse Carbon Fiber Products
S1000RR Race Fairings
Description:
Parts Included with Kit
upper race faring (6 Dzus)
lower fairing (4 Dzus)
left side panel right side panel
single race seat/Tail unit(2 pcs)
Airbox Cover With side panels Required to install- Bracket kit for Installation (must be purchased separately) IN403B
There are 2 types of Rear Bracket kits- oem and SBK subframe
Optional Not Included -There are 3 options for seats
Basic - This seat is a 15mm neoprene foam glued to a base that is molded from the seat pan of the tail section and then attaches to the seat pan with bolts. Please not that these seat's will only fit carbonin seat pans and seat units. It will not work on any other brand. This foam will wear out like any other foam pad.
Standard - This is an upgrade to the basic seat which is covered in a neoprene material that protects the basic foam and provides the rider a level of grip but without compromising the need to slide side to side. It looks much more professional and will protect the basic foam from any wear from patches on leather suits or abuse from side to side movements. we have seen these seats go on for 3 seasons or more!
Pro Seat - This seat is for riders or teams that require their seat to provide back support or a step seat to keep them in a position from sliding too far back in the seat under acceleration, this is often done with a raised section so they can still get back in the seat in the full tuck, they are just raised up more which helps keep the butt up and their head shoulders and chest lower in the tuck. It is the same material as the standard seat but can also be customized with team logo's or race number -If you purchase a pro seat we will contact you to design your seat. Please note pro seats are made custom to order
upper race faring (6 Dzus)
lower fairing (4 Dzus)
left side panel right side panel
single race seat/Tail unit(2 pcs)
Airbox Cover With side panels Required to install- Bracket kit for Installation (must be purchased separately) IN403B
There are 2 types of Rear Bracket kits- oem and SBK subframe
Optional Not Included -There are 3 options for seats
Basic - This seat is a 15mm neoprene foam glued to a base that is molded from the seat pan of the tail section and then attaches to the seat pan with bolts. Please not that these seat's will only fit carbonin seat pans and seat units. It will not work on any other brand. This foam will wear out like any other foam pad.
Standard - This is an upgrade to the basic seat which is covered in a neoprene material that protects the basic foam and provides the rider a level of grip but without compromising the need to slide side to side. It looks much more professional and will protect the basic foam from any wear from patches on leather suits or abuse from side to side movements. we have seen these seats go on for 3 seasons or more!
Pro Seat - This seat is for riders or teams that require their seat to provide back support or a step seat to keep them in a position from sliding too far back in the seat under acceleration, this is often done with a raised section so they can still get back in the seat in the full tuck, they are just raised up more which helps keep the butt up and their head shoulders and chest lower in the tuck. It is the same material as the standard seat but can also be customized with team logo's or race number -If you purchase a pro seat we will contact you to design your seat. Please note pro seats are made custom to order
Item #: CB42100
Condition:
New
In Stock inventory ships within 24 hours. Avio Fiber has a typical eta of 4-6 weeks, Carbon Fiber can take up to 8 weeks due to production times. Please note supply-chain related delays are possible.
Price: $2,991.04
Description:
This fairing is for the Trackday enthusiast that is still requiring the use of headlights and a sidestand for street riding.
We now sell a kit to include the upper fairing lower fairing and side panels with all of the necessary bracketry for you to purchase to be able to turn your road bike into a track weapon and still be street legal!
This lets you retain your oem seat, tail and airbox cover.
Parts Included with Carbon Fiber Kit:
-Upper race faring With Headlights Cut Out including Brackets for Carbonin fairing bracket for headlight mounting and installed quick release fasteners (DZUS)
-Lower fairing with side stand cut out for use with your kickstand
-Left side panel
-Right side panel
-CNC brackets
-Dzus fasteners
Please Note OEM air intake will need to be modified to fit with this bodywork. It is recommended to use the racing fairing bracket and air intake tube However you can trim your oem air intake tube to remove the inner trim plastic from the oem fairing
We now sell a kit to include the upper fairing lower fairing and side panels with all of the necessary bracketry for you to purchase to be able to turn your road bike into a track weapon and still be street legal!
This lets you retain your oem seat, tail and airbox cover.
Parts Included with Carbon Fiber Kit:
-Upper race faring With Headlights Cut Out including Brackets for Carbonin fairing bracket for headlight mounting and installed quick release fasteners (DZUS)
-Lower fairing with side stand cut out for use with your kickstand
-Left side panel
-Right side panel
-CNC brackets
-Dzus fasteners
Please Note OEM air intake will need to be modified to fit with this bodywork. It is recommended to use the racing fairing bracket and air intake tube However you can trim your oem air intake tube to remove the inner trim plastic from the oem fairing
Item #: CB42100-CUTF
Condition:
New
In Stock inventory ships within 24 hours. Avio Fiber has a typical eta of 4-6 weeks, Carbon Fiber can take up to 8 weeks due to production times. Please note supply-chain related delays are possible.
Price: $2,184.76
R1, Carbon Fiber, Bodywork,fairing,R1M
Description:
Parts Included In Complete Race Fairing:
• Upper Race Fairing (6 Dzus)
• Lower Fairing
• Left Side Panel for Big Radiator (3 Dzus)
• Right Side Panel for Big Radiator (3 Dzus)
• Single Race Tail (4 Pcs)
Not included
There are 3 options for seats
• Basic - This seat is a 15mm neoprene foam glued to a base that is molded from the seat pan of the tail section and then attaches to the seat pan with bolts. Please not that these seat's will only fit carbonin seat pans and seat units. It will not work on any other brand. This foam will wear out like any other foam pad.
• Standard - This is an upgrade to the basic seat which is covered in a neoprene material that protects the basic foam and provides the rider a level of grip but without compromising the need to slide side to side. It looks much more professional and will protect the basic foam from any wear from patches on leather suits or abuse from side to side movements. we have seen these seats go on for 3 seasons or more!
• Pro Seat - This seat is for riders or teams that require their seat to provide back support or a step seat to keep them in a position from sliding too far back in the seat under acceleration, this is often done with a raised section so they can still get back in the seat in the full tuck, they are just raised up more which helps keep the butt up and their head shoulders and chest lower in the tuck. It is the same material as the standard seat but can also be customized with team logo's or race number -If you purchase a pro seat we will contact you to design your seat. Please note pro seats are made custom to order
• Upper Race Fairing (6 Dzus)
• Lower Fairing
• Left Side Panel for Big Radiator (3 Dzus)
• Right Side Panel for Big Radiator (3 Dzus)
• Single Race Tail (4 Pcs)
Not included
There are 3 options for seats
• Basic - This seat is a 15mm neoprene foam glued to a base that is molded from the seat pan of the tail section and then attaches to the seat pan with bolts. Please not that these seat's will only fit carbonin seat pans and seat units. It will not work on any other brand. This foam will wear out like any other foam pad.
• Standard - This is an upgrade to the basic seat which is covered in a neoprene material that protects the basic foam and provides the rider a level of grip but without compromising the need to slide side to side. It looks much more professional and will protect the basic foam from any wear from patches on leather suits or abuse from side to side movements. we have seen these seats go on for 3 seasons or more!
• Pro Seat - This seat is for riders or teams that require their seat to provide back support or a step seat to keep them in a position from sliding too far back in the seat under acceleration, this is often done with a raised section so they can still get back in the seat in the full tuck, they are just raised up more which helps keep the butt up and their head shoulders and chest lower in the tuck. It is the same material as the standard seat but can also be customized with team logo's or race number -If you purchase a pro seat we will contact you to design your seat. Please note pro seats are made custom to order
Item #: CY192200
Condition:
New
In Stock inventory ships within 24 hours. Avio Fiber has a typical eta of 4-6 weeks, Carbon Fiber can take up to 8 weeks due to production times. Please note supply-chain related delays are possible.
Price: $2,313.62
R6,carbon fiber,fairing,bodywork
Description:
Parts Included In Complete Race Fairing:
• Upper Race Fairing (6 Dzus)
• Lower Fairing (5 Dzus)
• Left Side Panel
• Right Side Panel
• Supersport Race Tail (4 Pcs)
• Upper Race Fairing (6 Dzus)
• Lower Fairing (5 Dzus)
• Left Side Panel
• Right Side Panel
• Supersport Race Tail (4 Pcs)
Item #: CY12101
Condition:
New
In Stock inventory ships within 24 hours. Avio Fiber has a typical eta of 4-6 weeks, Carbon Fiber can take up to 8 weeks due to production times. Please note supply-chain related delays are possible.
Price: $2,044.26
R1,R1M bodywork,fairings,carbonin,carbon fiber
Description:
Parts Included In Complete Race Fairing:
• Upper Race Fairing (6 Dzus)
• Lower Fairing
• Left Side Panel (3 Dzus)
• Right Side Panel (3 Dzus)
• Single Race Tail (4 Pcs)
Not included but required:
IN1901Y Seat Bracket
*Cannot fit OEM Seat
• Upper Race Fairing (6 Dzus)
• Lower Fairing
• Left Side Panel (3 Dzus)
• Right Side Panel (3 Dzus)
• Single Race Tail (4 Pcs)
Not included but required:
IN1901Y Seat Bracket
*Cannot fit OEM Seat
Item #: CY19200
Condition:
New
In Stock inventory ships within 24 hours. Avio Fiber has a typical eta of 4-6 weeks, Carbon Fiber can take up to 8 weeks due to production times. Please note supply-chain related delays are possible.
Price: $2,313.62
Description:
This Kit consists of
• Upper
• Lower
• SBK tail unit with support
• Optional
There are 3 options for seats (not included in kit)
Basic - This seat is a 15mm neoprene foam glued to a base that is molded from the seat pan of the tail section and then attaches to the seat pan with bolts. Please not that these seat's will only fit carbonin seat pans and seat units. It will not work on any other brand. This foam will wear out like any other foam pad.
Standard - This is an upgrade to the basic seat which is covered in a neoprene material that protects the basic foam and provides the rider a level of grip but without compromising the need to slide side to side. It looks much more professional and will protect the basic foam from any wear from patches on leather suits or abuse from side to side movements. we have seen these seats go on for 3 seasons or more!
Pro Seat - This seat is for riders or teams that require their seat to provide back support or a step seat to keep them in a position from sliding too far back in the seat under acceleration, this is often done with a raised section so they can still get back in the seat in the full tuck, they are just raised up more which helps keep the butt up and their head shoulders and chest lower in the tuck. It is the same material as the standard seat but can also be customized with team logo's or race number -If you purchase a pro seat we will contact you to design your seat. Please note pro seats are made custom to order
• Upper
• Lower
• SBK tail unit with support
• Optional
There are 3 options for seats (not included in kit)
Basic - This seat is a 15mm neoprene foam glued to a base that is molded from the seat pan of the tail section and then attaches to the seat pan with bolts. Please not that these seat's will only fit carbonin seat pans and seat units. It will not work on any other brand. This foam will wear out like any other foam pad.
Standard - This is an upgrade to the basic seat which is covered in a neoprene material that protects the basic foam and provides the rider a level of grip but without compromising the need to slide side to side. It looks much more professional and will protect the basic foam from any wear from patches on leather suits or abuse from side to side movements. we have seen these seats go on for 3 seasons or more!
Pro Seat - This seat is for riders or teams that require their seat to provide back support or a step seat to keep them in a position from sliding too far back in the seat under acceleration, this is often done with a raised section so they can still get back in the seat in the full tuck, they are just raised up more which helps keep the butt up and their head shoulders and chest lower in the tuck. It is the same material as the standard seat but can also be customized with team logo's or race number -If you purchase a pro seat we will contact you to design your seat. Please note pro seats are made custom to order
Item #: CS10100
Condition:
New
In Stock inventory ships within 24 hours. Avio Fiber has a typical eta of 4-6 weeks, Carbon Fiber can take up to 8 weeks due to production times. Please note supply-chain related delays are possible.
Price: $1,980.25
GSXR1000,carbon fiber, bodywork,carbonin,fairing
Description:
Parts Included In Complete Race Fairing:
• Upper Race Fairing (6 Dzus)
• Lower Fairing (5 Dzus)
• Left Side Panel
• Right Side Panel
• Single Race Seat With Fuel Tank Panels (4 Pcs; 1 Dzus)
The 2017-2021 GSXR1000 Bodywork requires the following bracketry for fitment:
Aluminum CNC Inserts Side Panels (ALU1202S)
Inox Holders for Lower Fairing (IN1202S)
The The 2017-2021 GSXR1000 Bodywork also will require 1 of the 2 following tail unit inserts:
Aluminum CNC Tail Inserts Quick Release (Quick Release Bracket w/ DZUS) (ALU1204SCNC)
Aluminum CNC Tail Inserts Bolt On (Hard Mount w/ Bolt) (ALU1204SR)
There are 3 seat options available.
Basic - This seat is a 15mm neoprene foam glued to a base that is molded from the seat pan of the tail section and then attaches to the seat pan with bolts. Please not that these seat's will only fit Carbonin seat pans and seat units. It will not work on any other brand. This foam will wear out like any other foam pad.
Standard - This is an upgrade to the basic seat which is covered in a neoprene material that protects the basic foam and provides the rider a level of grip but without compromising the need to slide side to side. It looks much more professional and will protect the basic foam from any wear from patches on leather suits or abuse from side to side movements. we have seen these seats go on for 3 seasons or more!
Pro Seat - This seat is for riders or teams that require their seat to provide back support or a step seat to keep them in a position from sliding too far back in the seat under acceleration, this is often done with a raised section so they can still get back in the seat in the full tuck, they are just raised up more which helps keep the butt up and their head shoulders and chest lower in the tuck. It is the same material as the standard seat but can also be customized with team logo's or race number -If you purchase a pro seat we will contact you to design your seat. Please note pro seats are made custom to order
Carbonin Tail unit will not work with OEM Seat.
• Upper Race Fairing (6 Dzus)
• Lower Fairing (5 Dzus)
• Left Side Panel
• Right Side Panel
• Single Race Seat With Fuel Tank Panels (4 Pcs; 1 Dzus)
The 2017-2021 GSXR1000 Bodywork requires the following bracketry for fitment:
Aluminum CNC Inserts Side Panels (ALU1202S)
Inox Holders for Lower Fairing (IN1202S)
The The 2017-2021 GSXR1000 Bodywork also will require 1 of the 2 following tail unit inserts:
Aluminum CNC Tail Inserts Quick Release (Quick Release Bracket w/ DZUS) (ALU1204SCNC)
Aluminum CNC Tail Inserts Bolt On (Hard Mount w/ Bolt) (ALU1204SR)
There are 3 seat options available.
Basic - This seat is a 15mm neoprene foam glued to a base that is molded from the seat pan of the tail section and then attaches to the seat pan with bolts. Please not that these seat's will only fit Carbonin seat pans and seat units. It will not work on any other brand. This foam will wear out like any other foam pad.
Standard - This is an upgrade to the basic seat which is covered in a neoprene material that protects the basic foam and provides the rider a level of grip but without compromising the need to slide side to side. It looks much more professional and will protect the basic foam from any wear from patches on leather suits or abuse from side to side movements. we have seen these seats go on for 3 seasons or more!
Pro Seat - This seat is for riders or teams that require their seat to provide back support or a step seat to keep them in a position from sliding too far back in the seat under acceleration, this is often done with a raised section so they can still get back in the seat in the full tuck, they are just raised up more which helps keep the butt up and their head shoulders and chest lower in the tuck. It is the same material as the standard seat but can also be customized with team logo's or race number -If you purchase a pro seat we will contact you to design your seat. Please note pro seats are made custom to order
Carbonin Tail unit will not work with OEM Seat.
Item #: CS12100
Condition:
New
In Stock inventory ships within 24 hours. Avio Fiber has a typical eta of 4-6 weeks, Carbon Fiber can take up to 8 weeks due to production times. Please note supply-chain related delays are possible.
Price: $2,226.95
CBR1000RR,carbonin,carbonfiber,bodywork,fairing
Description:
Parts Included In Complete Race Fairing:
Upper Race Fairing (4 Dzus)
Lower Fairing (4 Dzus)
Left Side Panel
Right Side Panel
Single Race Seat (2 Pcs)
Fuel Tank Cover (Oem; 4 Dzus]
Optional
There are 3 options for seats
Basic - This seat is a 15mm neoprene foam glued to a base that is molded from the seat pan of the tail section and then attaches to the seat pan with bolts. Please not that these seat's will only fit carbonin seat pans and seat units. It will not work on any other brand. This foam will wear out like any other foam pad.
Standard - This is an upgrade to the basic seat which is covered in a neoprene material that protects the basic foam and provides the rider a level of grip but without compromising the need to slide side to side. It looks much more professional and will protect the basic foam from any wear from patches on leather suits or abuse from side to side movements. we have seen these seats go on for 3 seasons or more!
Pro Seat - This seat is for riders or teams that require their seat to provide back support or a step seat to keep them in a position from sliding too far back in the seat under acceleration, this is often done with a raised section so they can still get back in the seat in the full tuck, they are just raised up more which helps keep the butt up and their head shoulders and chest lower in the tuck. It is the same material as the standard seat but can also be customized with team logo's or race number -If you purchase a pro seat we will contact you to design your seat. Please note pro seats are made custom to order
Upper Race Fairing (4 Dzus)
Lower Fairing (4 Dzus)
Left Side Panel
Right Side Panel
Single Race Seat (2 Pcs)
Fuel Tank Cover (Oem; 4 Dzus]
Optional
There are 3 options for seats
Basic - This seat is a 15mm neoprene foam glued to a base that is molded from the seat pan of the tail section and then attaches to the seat pan with bolts. Please not that these seat's will only fit carbonin seat pans and seat units. It will not work on any other brand. This foam will wear out like any other foam pad.
Standard - This is an upgrade to the basic seat which is covered in a neoprene material that protects the basic foam and provides the rider a level of grip but without compromising the need to slide side to side. It looks much more professional and will protect the basic foam from any wear from patches on leather suits or abuse from side to side movements. we have seen these seats go on for 3 seasons or more!
Pro Seat - This seat is for riders or teams that require their seat to provide back support or a step seat to keep them in a position from sliding too far back in the seat under acceleration, this is often done with a raised section so they can still get back in the seat in the full tuck, they are just raised up more which helps keep the butt up and their head shoulders and chest lower in the tuck. It is the same material as the standard seat but can also be customized with team logo's or race number -If you purchase a pro seat we will contact you to design your seat. Please note pro seats are made custom to order
Item #: CH18100
Condition:
New
In Stock inventory ships within 24 hours. Avio Fiber has a typical eta of 4-6 weeks, Carbon Fiber can take up to 8 weeks due to production times. Please note supply-chain related delays are possible.
Price: $2,369.63
Description:
Parts Included In Complete Race Fairing:
• Upper Race Fairing (8 Dzus)
• Lower Fairing
• Left Side Panel (3 Dzus)
• Right Side Panel (3 Dzus)
• Single Race Tail (2 Pcs)
There are 3 options for seats (not included in kit)
Basic - This seat is a 15mm neoprene foam glued to a base that is molded from the seat pan of the tail section and then attaches to the seat pan with bolts. Please not that these seat's will only fit carbonin seat pans and seat units. It will not work on any other brand. This foam will wear out like any other foam pad.
Standard - This is an upgrade to the basic seat which is covered in a neoprene material that protects the basic foam and provides the rider a level of grip but without compromising the need to slide side to side. It looks much more professional and will protect the basic foam from any wear from patches on leather suits or abuse from side to side movements. we have seen these seats go on for 3 seasons or more!
Pro Seat - This seat is for riders or teams that require their seat to provide back support or a step seat to keep them in a position from sliding too far back in the seat under acceleration, this is often done with a raised section so they can still get back in the seat in the full tuck, they are just raised up more which helps keep the butt up and their head shoulders and chest lower in the tuck. It is the same material as the standard seat but can also be customized with team logo's or race number -If you purchase a pro seat we will contact you to design your seat. Please note pro seats are made custom to order
• Upper Race Fairing (8 Dzus)
• Lower Fairing
• Left Side Panel (3 Dzus)
• Right Side Panel (3 Dzus)
• Single Race Tail (2 Pcs)
There are 3 options for seats (not included in kit)
Basic - This seat is a 15mm neoprene foam glued to a base that is molded from the seat pan of the tail section and then attaches to the seat pan with bolts. Please not that these seat's will only fit carbonin seat pans and seat units. It will not work on any other brand. This foam will wear out like any other foam pad.
Standard - This is an upgrade to the basic seat which is covered in a neoprene material that protects the basic foam and provides the rider a level of grip but without compromising the need to slide side to side. It looks much more professional and will protect the basic foam from any wear from patches on leather suits or abuse from side to side movements. we have seen these seats go on for 3 seasons or more!
Pro Seat - This seat is for riders or teams that require their seat to provide back support or a step seat to keep them in a position from sliding too far back in the seat under acceleration, this is often done with a raised section so they can still get back in the seat in the full tuck, they are just raised up more which helps keep the butt up and their head shoulders and chest lower in the tuck. It is the same material as the standard seat but can also be customized with team logo's or race number -If you purchase a pro seat we will contact you to design your seat. Please note pro seats are made custom to order
Item #: CK18100
Condition:
New
In Stock inventory ships within 24 hours. Avio Fiber has a typical eta of 4-6 weeks, Carbon Fiber can take up to 8 weeks due to production times. Please note supply-chain related delays are possible.
Price: $2,242.95
R1,R1M,carbonin,carbon fiber,bodywork,fairing
Description:
Parts Included with Kit
• upper race faring (4 Dzus)
• lower fairing
• left side panel with optional ecu or rectifier housing. ecu for oem placement or Race for the YEC harness which houses the regulator rectifier
• right side panel
• single race seat (3 pcs) Standard seat can be used but you need to modify the battery retention plate
Not included
There are 3 options for seats
• Basic - This seat is a 15mm neoprene foam glued to a base that is molded from the seat pan of the tail section and then attaches to the seat pan with bolts. Please not that these seat's will only fit carbonin seat pans and seat units. It will not work on any other brand. This foam will wear out like any other foam pad.
• Standard - This is an upgrade to the basic seat which is covered in a neoprene material that protects the basic foam and provides the rider a level of grip but without compromising the need to slide side to side. It looks much more professional and will protect the basic foam from any wear from patches on leather suits or abuse from side to side movements. we have seen these seats go on for 3 seasons or more!
• Pro Seat - This seat is for riders or teams that require their seat to provide back support or a step seat to keep them in a position from sliding too far back in the seat under acceleration, this is often done with a raised section so they can still get back in the seat in the full tuck, they are just raised up more which helps keep the butt up and their head shoulders and chest lower in the tuck. It is the same material as the standard seat but can also be customized with team logo's or race number -If you purchase a pro seat we will contact you to design your seat. Please note pro seats are made custom to order
Tail Light Cut Out Option - with Moto America rules requiring a rain light there is an option for the oem tail light to be used. the light hole will be cut out and the light will attach like oem fitting. There are no Provisions for headlights to work with this kit- this would require custom modification.
• upper race faring (4 Dzus)
• lower fairing
• left side panel with optional ecu or rectifier housing. ecu for oem placement or Race for the YEC harness which houses the regulator rectifier
• right side panel
• single race seat (3 pcs) Standard seat can be used but you need to modify the battery retention plate
Not included
There are 3 options for seats
• Basic - This seat is a 15mm neoprene foam glued to a base that is molded from the seat pan of the tail section and then attaches to the seat pan with bolts. Please not that these seat's will only fit carbonin seat pans and seat units. It will not work on any other brand. This foam will wear out like any other foam pad.
• Standard - This is an upgrade to the basic seat which is covered in a neoprene material that protects the basic foam and provides the rider a level of grip but without compromising the need to slide side to side. It looks much more professional and will protect the basic foam from any wear from patches on leather suits or abuse from side to side movements. we have seen these seats go on for 3 seasons or more!
• Pro Seat - This seat is for riders or teams that require their seat to provide back support or a step seat to keep them in a position from sliding too far back in the seat under acceleration, this is often done with a raised section so they can still get back in the seat in the full tuck, they are just raised up more which helps keep the butt up and their head shoulders and chest lower in the tuck. It is the same material as the standard seat but can also be customized with team logo's or race number -If you purchase a pro seat we will contact you to design your seat. Please note pro seats are made custom to order
Tail Light Cut Out Option - with Moto America rules requiring a rain light there is an option for the oem tail light to be used. the light hole will be cut out and the light will attach like oem fitting. There are no Provisions for headlights to work with this kit- this would require custom modification.
Item #: CY16200
Condition:
New
In Stock inventory ships within 24 hours. Avio Fiber has a typical eta of 4-6 weeks, Carbon Fiber can take up to 8 weeks due to production times. Please note supply-chain related delays are possible.
Price: $2,252.28
Description:
Upper Race Fairing (6 Dzus)
Lower Fairing (for oversized Radiator, Does fit OEM)
Left Side Panel (for oversized Radiator, Does fit OEM)
Right Side Panel (for oversized Radiator, Does fit OEM)
Single Race Seat (3 Pcs)
Please Note that this Kit has been designed to be used witha bracket kit so the fairing can be mounted to the bike with Dzus fasteners.
Cnc billet option
Optional
There are 3 options for seats
Basic - This seat is a 15mm neoprene foam glued to a base that is molded from the seat pan of the tail section and then attaches to the seat pan with bolts. Please not that these seat's will only fit carbonin seat pans and seat units. It will not work on any other brand. This foam will wear out like any other foam pad.
Standard - This is an upgrade to the basic seat which is covered in a neoprene material that protects the basic foam and provides the rider a level of grip but without compromising the need to slide side to side. It looks much more professional and will protect the basic foam from any wear from patches on leather suits or abuse from side to side movements. we have seen these seats go on for 3 seasons or more!
Pro Seat - This seat is for riders or teams that require their seat to provide back support or a step seat to keep them in a position from sliding too far back in the seat under acceleration, this is often done with a raised section so they can still get back in the seat in the full tuck, they are just raised up more which helps keep the butt up and their head shoulders and chest lower in the tuck. It is the same material as the standard seat but can also be customized with team logo's or race number -If you purchase a pro seat we will contact you to design your seat. Please note pro seats are made custom to order
Tail Light Cut Out Option - with Moto America rules requiring a rain light there is an option for the oem tail light to be used. the light hole will be cut out and the light will attach like oem fitting. There are no Provisions for headlights to work with this kit- this would require custom modification
Lower Fairing (for oversized Radiator, Does fit OEM)
Left Side Panel (for oversized Radiator, Does fit OEM)
Right Side Panel (for oversized Radiator, Does fit OEM)
Single Race Seat (3 Pcs)
Please Note that this Kit has been designed to be used witha bracket kit so the fairing can be mounted to the bike with Dzus fasteners.
Cnc billet option
Optional
There are 3 options for seats
Basic - This seat is a 15mm neoprene foam glued to a base that is molded from the seat pan of the tail section and then attaches to the seat pan with bolts. Please not that these seat's will only fit carbonin seat pans and seat units. It will not work on any other brand. This foam will wear out like any other foam pad.
Standard - This is an upgrade to the basic seat which is covered in a neoprene material that protects the basic foam and provides the rider a level of grip but without compromising the need to slide side to side. It looks much more professional and will protect the basic foam from any wear from patches on leather suits or abuse from side to side movements. we have seen these seats go on for 3 seasons or more!
Pro Seat - This seat is for riders or teams that require their seat to provide back support or a step seat to keep them in a position from sliding too far back in the seat under acceleration, this is often done with a raised section so they can still get back in the seat in the full tuck, they are just raised up more which helps keep the butt up and their head shoulders and chest lower in the tuck. It is the same material as the standard seat but can also be customized with team logo's or race number -If you purchase a pro seat we will contact you to design your seat. Please note pro seats are made custom to order
Tail Light Cut Out Option - with Moto America rules requiring a rain light there is an option for the oem tail light to be used. the light hole will be cut out and the light will attach like oem fitting. There are no Provisions for headlights to work with this kit- this would require custom modification
Item #: CB3101
Condition:
New
In Stock inventory ships within 24 hours. Avio Fiber has a typical eta of 4-6 weeks, Carbon Fiber can take up to 8 weeks due to production times. Please note supply-chain related delays are possible.
Price: $2,094.93
RSV4,carbonin,carbon fiber,bodywork,fairing
Description:
Parts Included In Complete Race Fairing:
Upper Race Fairing (6 Dzus)
Lower Fairing
Left Side Panel (2 Dzus)
Right Side Panel (2 Dzus)
Single Race Seat (2 Pcs) There are 3 options for seats
• Basic - This seat is a 15mm neoprene foam glued to a base that is molded from the seat pan of the tail section and then attaches to the seat pan with bolts. Please not that these seat's will only fit carbonin seat pans and seat units. It will not work on any other brand. This foam will wear out like any other foam pad.
• Standard - This is an upgrade to the basic seat which is covered in a neoprene material that protects the basic foam and provides the rider a level of grip but without compromising the need to slide side to side. It looks much more professional and will protect the basic foam from any wear from patches on leather suits or abuse from side to side movements. we have seen these seats go on for 3 seasons or more!
• Pro Seat - This seat is for riders or teams that require their seat to provide back support or a step seat to keep them in a position from sliding too far back in the seat under acceleration, this is often done with a raised section so they can still get back in the seat in the full tuck, they are just raised up more which helps keep the butt up and their head shoulders and chest lower in the tuck. It is the same material as the standard seat but can also be customized with team logo's or race number -If you purchase a pro seat we will contact you to design your seat. Please note pro seats are made custom to order
Upper Race Fairing (6 Dzus)
Lower Fairing
Left Side Panel (2 Dzus)
Right Side Panel (2 Dzus)
Single Race Seat (2 Pcs) There are 3 options for seats
• Basic - This seat is a 15mm neoprene foam glued to a base that is molded from the seat pan of the tail section and then attaches to the seat pan with bolts. Please not that these seat's will only fit carbonin seat pans and seat units. It will not work on any other brand. This foam will wear out like any other foam pad.
• Standard - This is an upgrade to the basic seat which is covered in a neoprene material that protects the basic foam and provides the rider a level of grip but without compromising the need to slide side to side. It looks much more professional and will protect the basic foam from any wear from patches on leather suits or abuse from side to side movements. we have seen these seats go on for 3 seasons or more!
• Pro Seat - This seat is for riders or teams that require their seat to provide back support or a step seat to keep them in a position from sliding too far back in the seat under acceleration, this is often done with a raised section so they can still get back in the seat in the full tuck, they are just raised up more which helps keep the butt up and their head shoulders and chest lower in the tuck. It is the same material as the standard seat but can also be customized with team logo's or race number -If you purchase a pro seat we will contact you to design your seat. Please note pro seats are made custom to order
Item #: CA5200
Condition:
New
In Stock inventory ships within 24 hours. Avio Fiber has a typical eta of 4-6 weeks, Carbon Fiber can take up to 8 weeks due to production times. Please note supply-chain related delays are possible.
Price: $2,065.59
R1,carbon fiber, bodywork fairing
Description:
Parts Included In Complete SBK Fairing:
• SBK Upper Race Fairing (8 Dzus) Has Larger area on upper fairing and Larger air intake tubes. *requires Airtubes and Windshield
• Lower Fairing (4 Dzus)
• Left Side Panel
• Right Side Panel
• Single Race Seat (3 Pcs)
• SBK Upper Race Fairing (8 Dzus) Has Larger area on upper fairing and Larger air intake tubes. *requires Airtubes and Windshield
• Lower Fairing (4 Dzus)
• Left Side Panel
• Right Side Panel
• Single Race Seat (3 Pcs)
Item #: CY14101
Condition:
New
In Stock inventory ships within 24 hours. Avio Fiber has a typical eta of 4-6 weeks, Carbon Fiber can take up to 8 weeks due to production times. Please note supply-chain related delays are possible.
Price: $2,028.25
ZX10R,carbonin,bodywork
Description:
Parts Included In Complete SBK Fairing:
• Upper SBK Race Fairing (6 Dzus) Has a larger Surface area and requires SBK windshield
• Lower Fairing
• Left Side Panel (3 Dzus)
• Right Side Panel (3 Dzus)
• SBK tail unit
• Upper SBK Race Fairing (6 Dzus) Has a larger Surface area and requires SBK windshield
• Lower Fairing
• Left Side Panel (3 Dzus)
• Right Side Panel (3 Dzus)
• SBK tail unit
Item #: CK16101
Condition:
New
In Stock inventory ships within 24 hours. Avio Fiber has a typical eta of 4-6 weeks, Carbon Fiber can take up to 8 weeks due to production times. Please note supply-chain related delays are possible.
Price: $2,028.25
Description:
Parts Included In Complete Race Fairing:
Upper Race Fairing (4 Dzus)
Lower Fairing
Single Race Seat
Fuel Tank Cover (Oem)
Optional
There are 3 options for seats
Basic - This seat is a 15mm neoprene foam glued to a base that is molded from the seat pan of the tail section and then attaches to the seat pan with bolts. Please not that these seat's will only fit carbonin seat pans and seat units. It will not work on any other brand. This foam will wear out like any other foam pad.
Standard - This is an upgrade to the basic seat which is covered in a neoprene material that protects the basic foam and provides the rider a level of grip but without compromising the need to slide side to side. It looks much more professional and will protect the basic foam from any wear from patches on leather suits or abuse from side to side movements. we have seen these seats go on for 3 seasons or more!
Pro Seat - This seat is for riders or teams that require their seat to provide back support or a step seat to keep them in a position from sliding too far back in the seat under acceleration, this is often done with a raised section so they can still get back in the seat in the full tuck, they are just raised up more which helps keep the butt up and their head shoulders and chest lower in the tuck. It is the same material as the standard seat but can also be customized with team logo's or race number -If you purchase a pro seat we will contact you to design your seat. Please note pro seats are made custom to order
Upper Race Fairing (4 Dzus)
Lower Fairing
Single Race Seat
Fuel Tank Cover (Oem)
Optional
There are 3 options for seats
Basic - This seat is a 15mm neoprene foam glued to a base that is molded from the seat pan of the tail section and then attaches to the seat pan with bolts. Please not that these seat's will only fit carbonin seat pans and seat units. It will not work on any other brand. This foam will wear out like any other foam pad.
Standard - This is an upgrade to the basic seat which is covered in a neoprene material that protects the basic foam and provides the rider a level of grip but without compromising the need to slide side to side. It looks much more professional and will protect the basic foam from any wear from patches on leather suits or abuse from side to side movements. we have seen these seats go on for 3 seasons or more!
Pro Seat - This seat is for riders or teams that require their seat to provide back support or a step seat to keep them in a position from sliding too far back in the seat under acceleration, this is often done with a raised section so they can still get back in the seat in the full tuck, they are just raised up more which helps keep the butt up and their head shoulders and chest lower in the tuck. It is the same material as the standard seat but can also be customized with team logo's or race number -If you purchase a pro seat we will contact you to design your seat. Please note pro seats are made custom to order
Item #: CH17100
Condition:
New
In Stock inventory ships within 24 hours. Avio Fiber has a typical eta of 4-6 weeks, Carbon Fiber can take up to 8 weeks due to production times. Please note supply-chain related delays are possible.
Price: $2,304.29
Description:
Parts Included In Complete Race Fairing For Race Exhaust:
Upper Race Fairing (6 Dzus)
Lower Fairing (For oem Exhaust) not race legal
Left Side Panel (3 Dzus)
Right Side Panel (3 Dzus)
Single Race Seat (3 Pcs)
Optional
There are 3 options for seats
Basic - This seat is a 15mm neoprene foam glued to a base that is molded from the seat pan of the tail section and then attaches to the seat pan with bolts. Please not that these seat's will only fit carbonin seat pans and seat units. It will not work on any other brand. This foam will wear out like any other foam pad.
Standard - This is an upgrade to the basic seat which is covered in a neoprene material that protects the basic foam and provides the rider a level of grip but without compromising the need to slide side to side. It looks much more professional and will protect the basic foam from any wear from patches on leather suits or abuse from side to side movements. we have seen these seats go on for 3 seasons or more!
Pro Seat - This seat is for riders or teams that require their seat to provide back support or a step seat to keep them in a position from sliding too far back in the seat under acceleration, this is often done with a raised section so they can still get back in the seat in the full tuck, they are just raised up more which helps keep the butt up and their head shoulders and chest lower in the tuck. It is the same material as the standard seat but can also be customized with team logo's or race number -If you purchase a pro seat we will contact you to design your seat. Please note pro seats are made custom to order
Upper Race Fairing (6 Dzus)
Lower Fairing (For oem Exhaust) not race legal
Left Side Panel (3 Dzus)
Right Side Panel (3 Dzus)
Single Race Seat (3 Pcs)
Optional
There are 3 options for seats
Basic - This seat is a 15mm neoprene foam glued to a base that is molded from the seat pan of the tail section and then attaches to the seat pan with bolts. Please not that these seat's will only fit carbonin seat pans and seat units. It will not work on any other brand. This foam will wear out like any other foam pad.
Standard - This is an upgrade to the basic seat which is covered in a neoprene material that protects the basic foam and provides the rider a level of grip but without compromising the need to slide side to side. It looks much more professional and will protect the basic foam from any wear from patches on leather suits or abuse from side to side movements. we have seen these seats go on for 3 seasons or more!
Pro Seat - This seat is for riders or teams that require their seat to provide back support or a step seat to keep them in a position from sliding too far back in the seat under acceleration, this is often done with a raised section so they can still get back in the seat in the full tuck, they are just raised up more which helps keep the butt up and their head shoulders and chest lower in the tuck. It is the same material as the standard seat but can also be customized with team logo's or race number -If you purchase a pro seat we will contact you to design your seat. Please note pro seats are made custom to order
Item #: CB2100
Condition:
New
In Stock inventory ships within 24 hours. Avio Fiber has a typical eta of 4-6 weeks, Carbon Fiber can take up to 8 weeks due to production times. Please note supply-chain related delays are possible.
Price: $2,028.25
ZX10r,bodywork,carbon fiber,carbonin
Description:
Parts Included In Complete Race Fairing:
• Upper Race Fairing Oem Style(6 Dzus)
• Lower Fairing
• Left Side Panel (3 Dzus)
• Right Side Panel (3 Dzus)
• SBK tail unit
• Upper Race Fairing Oem Style(6 Dzus)
• Lower Fairing
• Left Side Panel (3 Dzus)
• Right Side Panel (3 Dzus)
• SBK tail unit
Item #: CK16100
Condition:
New
In Stock inventory ships within 24 hours. Avio Fiber has a typical eta of 4-6 weeks, Carbon Fiber can take up to 8 weeks due to production times. Please note supply-chain related delays are possible.
Price: $2,028.25
CBR1000RR, HRC,bodywork,carbonin,fairing
Description:
Parts Included In Complete Hrc Fairing:
Hrc Upper Fainng (8 Dzus)
Hrc Lower Fairing
Hrc Single Race Seat
Hrc Fuel Tank Cover
*May be modified to work with oem subframe so we recommend HRC Subframe
Hrc Upper Fainng (8 Dzus)
Hrc Lower Fairing
Hrc Single Race Seat
Hrc Fuel Tank Cover
*May be modified to work with oem subframe so we recommend HRC Subframe
Item #: CH13101
Condition:
New
In Stock inventory ships within 24 hours. Avio Fiber has a typical eta of 4-6 weeks, Carbon Fiber can take up to 8 weeks due to production times. Please note supply-chain related delays are possible.
Price: $2,336.29
Description:
Parts Included In Complete Race Fairing:
Upper Race Fairing With Adapter (2 Pcs)
Left Side Panel
Right Side Panel
Lower Race Fairing
Single Race tail (Oem style) Uses oem seat
Upper Race Fairing With Adapter (2 Pcs)
Left Side Panel
Right Side Panel
Lower Race Fairing
Single Race tail (Oem style) Uses oem seat
Item #: CD3100
Condition:
New
In Stock inventory ships within 24 hours. Avio Fiber has a typical eta of 4-6 weeks, Carbon Fiber can take up to 8 weeks due to production times. Please note supply-chain related delays are possible.
Price: $1,878.90
Description:
Parts Included In Complete Race Fairing:
• Upper Race Fairing
• Left Side Panel
• Right Side Panel
• Race Tail unit 3 pieces
•
• Please Note That Oil containment pan will need to be purchased separate from the kit
• Uses OEM Seat
Please note this kit was designed for the 899 and 1199 Panigale and requires bracketry for installing
This may be installed on a 1299 with the brackets however the Aluminum fairing bracket ALU4002D must be used in combination with the airbox inlet tubes CD4064 due to the difference in shape.
1199 windscreen is also required
• Upper Race Fairing
• Left Side Panel
• Right Side Panel
• Race Tail unit 3 pieces
•
• Please Note That Oil containment pan will need to be purchased separate from the kit
• Uses OEM Seat
Please note this kit was designed for the 899 and 1199 Panigale and requires bracketry for installing
This may be installed on a 1299 with the brackets however the Aluminum fairing bracket ALU4002D must be used in combination with the airbox inlet tubes CD4064 due to the difference in shape.
1199 windscreen is also required
Item #: CD4100
Condition:
New
In Stock inventory ships within 24 hours. Avio Fiber has a typical eta of 4-6 weeks, Carbon Fiber can take up to 8 weeks due to production times. Please note supply-chain related delays are possible.
Price: $2,332.29
Description:
Carbon air intake to be used with Aluminum fairing bracket ALU4002D
Item #: CD4064
Condition:
New
In Stock inventory ships within 24 hours. Avio Fiber has a typical eta of 4-6 weeks, Carbon Fiber can take up to 8 weeks due to production times. Please note supply-chain related delays are possible.
Price: $246.70
Description:
This is a 1 piece airbox cover that has the side panels built to be used with Alpha racing sbk tank.
It comes Ready to install on your Bike with Perfect Fitment when using matching Carbonin Tail unit
Made from Carbon Fiber
Light Flexible & Durable
It comes Ready to install on your Bike with Perfect Fitment when using matching Carbonin Tail unit
Made from Carbon Fiber
Light Flexible & Durable
Item #: CB4426
Condition:
New
In Stock inventory ships within 24 hours. Avio Fiber has a typical eta of 4-6 weeks, Carbon Fiber can take up to 8 weeks due to production times. Please note supply-chain related delays are possible.
Price: $464.06
Description:
Carbonin Carbon Fiber Airbox Cover with Side Panels 2021 Honda CBR1000RR-R CH20425
-will not fit with other brands
-Required for fitment with Carbonin 2021 Honda CBR1000RR-R tail unit in Carbon Fiber CH20300 or Avio Fiber H20300AF
-Does not include Required Brackets for Airbox Cover (2 pcs) IN2001H
-will not fit with other brands
-Required for fitment with Carbonin 2021 Honda CBR1000RR-R tail unit in Carbon Fiber CH20300 or Avio Fiber H20300AF
-Does not include Required Brackets for Airbox Cover (2 pcs) IN2001H
Item #: CH20425
Condition:
New
In Stock inventory ships within 24 hours. Avio Fiber has a typical eta of 4-6 weeks, Carbon Fiber can take up to 8 weeks due to production times. Please note supply-chain related delays are possible.
Price: $438.72
ZX10R Carbon battery tray for Carbonin Tail
Description:
This is the battery tray section and does not include the following parts:
Left wing
Right wing
Seat unit top
Seat unit bracket and Dzus which all need to be purchased as a Kit under part number CK22300-Kit
These are being sold as replacement parts and do not interchange with the oem bodywork panels
Seat Foams need to be purchased separately
Left wing
Right wing
Seat unit top
Seat unit bracket and Dzus which all need to be purchased as a Kit under part number CK22300-Kit
These are being sold as replacement parts and do not interchange with the oem bodywork panels
Seat Foams need to be purchased separately
Item #: CK22309
Condition:
New
In Stock inventory ships within 24 hours. Avio Fiber has a typical eta of 4-6 weeks, Carbon Fiber can take up to 8 weeks due to production times. Please note supply-chain related delays are possible.
Price: $244.48
Description:
Parts Included In Complete Road Fairing:
Upper Road Fairing With Adapter (2 Pcs)
Left Side Panel
Right Side Panel
Lower Road Fairing
Single Road Tail unit which uses (OEM) Seat
Upper Road Fairing With Adapter (2 Pcs)
Left Side Panel
Right Side Panel
Lower Road Fairing
Single Road Tail unit which uses (OEM) Seat
Item #: CD3105
Condition:
New
In Stock inventory ships within 24 hours. Avio Fiber has a typical eta of 4-6 weeks, Carbon Fiber can take up to 8 weeks due to production times. Please note supply-chain related delays are possible.
Price: $2,092.26
Description:
Replacement gas tank for carbonin bodywork
Item #: CH17400
Condition:
New
In Stock inventory ships within 24 hours. Avio Fiber has a typical eta of 4-6 weeks, Carbon Fiber can take up to 8 weeks due to production times. Please note supply-chain related delays are possible.
Price: $380.05
Description:
Replacement gast tank cover for carbonin bodywork
Item #: CH18400
Condition:
New
In Stock inventory ships within 24 hours. Avio Fiber has a typical eta of 4-6 weeks, Carbon Fiber can take up to 8 weeks due to production times. Please note supply-chain related delays are possible.
Price: $547.41
Description:
Replacement Tank cover for carbonin HRC bodywork
Item #: CH13401
Condition:
New
In Stock inventory ships within 24 hours. Avio Fiber has a typical eta of 4-6 weeks, Carbon Fiber can take up to 8 weeks due to production times. Please note supply-chain related delays are possible.
Price: $380.05
Description:
Replacement lower race Fairing For Carbonin complete fairing, will not fit with other brands
Item #: CH13221
Condition:
New
In Stock inventory ships within 24 hours. Avio Fiber has a typical eta of 4-6 weeks, Carbon Fiber can take up to 8 weeks due to production times. Please note supply-chain related delays are possible.
Price: $544.07
Description:
Replacement Upper Fairing For Carbonin complete fairing, will not fit with other brands
Item #: CH13211
Condition:
New
In Stock inventory ships within 24 hours. Avio Fiber has a typical eta of 4-6 weeks, Carbon Fiber can take up to 8 weeks due to production times. Please note supply-chain related delays are possible.
Price: $916.11
Description:
Carbonin Carbon Fiber Left Side Inner Wing 2021 Honda CBR1000RR-R CH20237, will not fit with other brands
Item #: CH20237
Condition:
New
In Stock inventory ships within 24 hours. Avio Fiber has a typical eta of 4-6 weeks, Carbon Fiber can take up to 8 weeks due to production times. Please note supply-chain related delays are possible.
Price: $285.37
Description:
Carbonin Carbon Fiber Left Side Panel (2Dzus) 2021 Honda CBR1000RR-R CH20231, will not fit with other brands.
-Does not include Required Carbonin Carbon Fiber Left Side Wing Cover CH20236
-Does not include Required Carbonin Carbon Fiber Left Side Inner Wing CH20237
-Does not include Required Carbonin Carbon Fiber Left Side Wing Cover CH20236
-Does not include Required Carbonin Carbon Fiber Left Side Inner Wing CH20237
Item #: CH20231
Condition:
New
In Stock inventory ships within 24 hours. Avio Fiber has a typical eta of 4-6 weeks, Carbon Fiber can take up to 8 weeks due to production times. Please note supply-chain related delays are possible.
Price: $478.73
Description:
Replacement left side fairing
Item #: CD3130
Condition:
New
In Stock inventory ships within 24 hours. Avio Fiber has a typical eta of 4-6 weeks, Carbon Fiber can take up to 8 weeks due to production times. Please note supply-chain related delays are possible.
Price: $306.71
No Image Available
Description:
Replacement left side Fairing For Carbonin complete fairing, will not fit with other brands
Item #: CY12231
Condition:
New
In Stock inventory ships within 24 hours. Avio Fiber has a typical eta of 4-6 weeks, Carbon Fiber can take up to 8 weeks due to production times. Please note supply-chain related delays are possible.
Price: $213.36
Description:
Replacement left side Fairing For Carbonin complete fairing, will not fit with other brands
Item #: CY12212
Condition:
New
In Stock inventory ships within 24 hours. Avio Fiber has a typical eta of 4-6 weeks, Carbon Fiber can take up to 8 weeks due to production times. Please note supply-chain related delays are possible.
Price: $213.36
Description:
Carbonin Carbon Fiber Left Side Panel 2009-2014 BMW S1000RR CB2231
Replacement left side Fairing For Carbonin complete fairing, will not fit with other brands
Replacement left side Fairing For Carbonin complete fairing, will not fit with other brands
Item #: CB2231
Condition:
New
In Stock inventory ships within 24 hours. Avio Fiber has a typical eta of 4-6 weeks, Carbon Fiber can take up to 8 weeks due to production times. Please note supply-chain related delays are possible.
Price: $350.71
Description:
Replacement Left side Fairing For Carbonin complete fairing, will not fit with other brands includes 2Dzus fasteners
Item #: CA5231
Condition:
New
In Stock inventory ships within 24 hours. Avio Fiber has a typical eta of 4-6 weeks, Carbon Fiber can take up to 8 weeks due to production times. Please note supply-chain related delays are possible.
Price: $256.03
Description:
Replacement left side Fairing For Carbonin complete fairing, will not fit with other brands
Item #: CK18231
Condition:
New
In Stock inventory ships within 24 hours. Avio Fiber has a typical eta of 4-6 weeks, Carbon Fiber can take up to 8 weeks due to production times. Please note supply-chain related delays are possible.
Price: $396.72
Description:
Replacement left side Fairing For Carbonin complete fairing, will not fit with other brands
Item #: CH18231
Condition:
New
In Stock inventory ships within 24 hours. Avio Fiber has a typical eta of 4-6 weeks, Carbon Fiber can take up to 8 weeks due to production times. Please note supply-chain related delays are possible.
Price: $302.04
Description:
Replacement left side Fairing For Carbonin complete fairing, will not fit with other brands
Item #: CS12231
Condition:
New
Limited Supply: Only 1 Left!
In Stock inventory ships within 24 hours. Avio Fiber has a typical eta of 4-6 weeks, Carbon Fiber can take up to 8 weeks due to production times. Please note supply-chain related delays are possible.
Price: $306.71
ZX10r Replacement side panel
Description:
Replacement left side Fairing For Carbonin complete fairing, will not fit with other brands
Item #: CK22231
Condition:
New
In Stock inventory ships within 24 hours. Avio Fiber has a typical eta of 4-6 weeks, Carbon Fiber can take up to 8 weeks due to production times. Please note supply-chain related delays are possible.
Price: $433.07
Description:
Replacement left side Fairing For Carbonin complete fairing, will not fit with other brands
Item #: CB3233
Condition:
New
In Stock inventory ships within 24 hours. Avio Fiber has a typical eta of 4-6 weeks, Carbon Fiber can take up to 8 weeks due to production times. Please note supply-chain related delays are possible.
Price: $340.04
zx10r front wing
Description:
Replacement left side Fairing Cover For Carbonin complete fairing, will not fit with other brands
This is the portion that makes the wing and attaches to the carbonin upper and side panel
This is the portion that makes the wing and attaches to the carbonin upper and side panel
Item #: CK22236
Condition:
New
In Stock inventory ships within 24 hours. Avio Fiber has a typical eta of 4-6 weeks, Carbon Fiber can take up to 8 weeks due to production times. Please note supply-chain related delays are possible.
Price: $134.11
Description:
Replacement Left side fairing
Item #: CD4231
Condition:
New
In Stock inventory ships within 24 hours. Avio Fiber has a typical eta of 4-6 weeks, Carbon Fiber can take up to 8 weeks due to production times. Please note supply-chain related delays are possible.
Price: $606.74
Description:
Replacement left side Fairing For Carbonin complete fairing, will not fit with other brands
Item #: CB4231
Condition:
New
In Stock inventory ships within 24 hours. Avio Fiber has a typical eta of 4-6 weeks, Carbon Fiber can take up to 8 weeks due to production times. Please note supply-chain related delays are possible.
Price: $384.05
Description:
Replacement Carbon fiber Left side panel for oem ECU housing
Item #: CY16231
Condition:
New
In Stock inventory ships within 24 hours. Avio Fiber has a typical eta of 4-6 weeks, Carbon Fiber can take up to 8 weeks due to production times. Please note supply-chain related delays are possible.
Price: $220.03
Description:
Replacement Carbon fiber Left side panel for YEC repositioned ecu houses regulator rectifier
Item #: CY16233
Condition:
New
In Stock inventory ships within 24 hours. Avio Fiber has a typical eta of 4-6 weeks, Carbon Fiber can take up to 8 weeks due to production times. Please note supply-chain related delays are possible.
Price: $220.03
Description:
Carbonin Carbon Fiber Left Side Wing Cover 2021 Honda CBR1000RR-R CH20236
-will not fit with other brands
-will not fit with other brands
Item #: CH20236
Condition:
New
In Stock inventory ships within 24 hours. Avio Fiber has a typical eta of 4-6 weeks, Carbon Fiber can take up to 8 weeks due to production times. Please note supply-chain related delays are possible.
Price: $148.02
Description:
Replacement lower race Fairing For Carbonin complete fairing, will not fit with other brands
Item #: CK15220
Condition:
New
In Stock inventory ships within 24 hours. Avio Fiber has a typical eta of 4-6 weeks, Carbon Fiber can take up to 8 weeks due to production times. Please note supply-chain related delays are possible.
Price: $544.07
Description:
Replacement Carbon Fiber Lower Fairing
Carbonin Lower Fairing Bracket required IN1802Y
Carbonin Lower Fairing Bracket required IN1802Y
Item #: CY18220
Condition:
New
In Stock inventory ships within 24 hours. Avio Fiber has a typical eta of 4-6 weeks, Carbon Fiber can take up to 8 weeks due to production times. Please note supply-chain related delays are possible.
Price: $466.73
Description:
Replacement lower race Fairing For Carbonin complete fairing, will not fit with other brands
Item #: CY12220
Condition:
New
In Stock inventory ships within 24 hours. Avio Fiber has a typical eta of 4-6 weeks, Carbon Fiber can take up to 8 weeks due to production times. Please note supply-chain related delays are possible.
Price: $466.73
Description:
Replacement lower race Fairing For Carbonin complete fairing, will not fit with other brands
Item #: CS10220
Condition:
New
In Stock inventory ships within 24 hours. Avio Fiber has a typical eta of 4-6 weeks, Carbon Fiber can take up to 8 weeks due to production times. Please note supply-chain related delays are possible.
Price: $544.07
Description:
Replacement lower race Fairing For Carbonin complete fairing, will not fit with other brands
Item #: CK16220
Condition:
New
In Stock inventory ships within 24 hours. Avio Fiber has a typical eta of 4-6 weeks, Carbon Fiber can take up to 8 weeks due to production times. Please note supply-chain related delays are possible.
Price: $333.38
Description:
Replacement lower race Fairing For Carbonin complete fairing, will not fit with other brands
Item #: CH17220
Condition:
New
In Stock inventory ships within 24 hours. Avio Fiber has a typical eta of 4-6 weeks, Carbon Fiber can take up to 8 weeks due to production times. Please note supply-chain related delays are possible.
Price: $544.07
Description:
Replacement Lower fairing for the carbonin race kit
Item #: CA5220
Condition:
New
In Stock inventory ships within 24 hours. Avio Fiber has a typical eta of 4-6 weeks, Carbon Fiber can take up to 8 weeks due to production times. Please note supply-chain related delays are possible.
Price: $500.06
Description:
Replacement Lower Fairing
Item #: CY16220
Condition:
New
In Stock inventory ships within 24 hours. Avio Fiber has a typical eta of 4-6 weeks, Carbon Fiber can take up to 8 weeks due to production times. Please note supply-chain related delays are possible.
Price: $593.41
Description:
Replacement lower race Fairing For Carbonin complete fairing, will not fit with other brands
Item #: CK18220
Condition:
New
In Stock inventory ships within 24 hours. Avio Fiber has a typical eta of 4-6 weeks, Carbon Fiber can take up to 8 weeks due to production times. Please note supply-chain related delays are possible.
Price: $356.04
Description:
Replacement lower race Fairing For Carbonin complete fairing, will not fit with other brands
Item #: CH18220
Condition:
New
In Stock inventory ships within 24 hours. Avio Fiber has a typical eta of 4-6 weeks, Carbon Fiber can take up to 8 weeks due to production times. Please note supply-chain related delays are possible.
Price: $461.39
Description:
Replacement lower race Fairing For Carbonin complete fairing, will not fit with other brands
Item #: CS12220
Condition:
New
Limited Supply: Only 1 Left!
In Stock inventory ships within 24 hours. Avio Fiber has a typical eta of 4-6 weeks, Carbon Fiber can take up to 8 weeks due to production times. Please note supply-chain related delays are possible.
Price: $506.73
ZX10r Replacement Carbon race lower
Description:
Replacement lower race Fairing For Carbonin complete fairing, will not fit with other brands
This will work with Kickstand
This will work with Kickstand
Item #: CK22220
Condition:
New
In Stock inventory ships within 24 hours. Avio Fiber has a typical eta of 4-6 weeks, Carbon Fiber can take up to 8 weeks due to production times. Please note supply-chain related delays are possible.
Price: $331.09