HHR Performance - Blanking plates Fasteners & Swingarm spools

 Accessories - Blanking plates Fasteners & Swingarm spools
We carry a wide variety of Blanking plates and plugs for all current motorcycles

Browse Blanking plates Fasteners & Swingarm spools Products

Sort
Clear Brand
View
 
Items 1-12 of 12
Description: Graves Motorsports Universal Motorcycle Swing arm Spool Adapter mounts are designed for motorcycles like the Yamaha FZ-07 / MT-07 / XSR 700 that do not come standard with factory pre drilled spool mounts.

This kit requires drilling and installing the mount rivets. Included with the kit are a set (2) of 6mm Graves swing arm spools. See the instructions tab to answer any mounting questions.

Fitment: Multiple Bikes including the Yamaha FZ-07 2015-2017 / MT-07 2018-2019 / XSR700 2016-2019
Item #: PEU-SA-K
Condition: New
Please feel free to call us for ETA if no ‘Limited Supply’ is listed above.
Price: $62.43

Qty:

Description:
 
Graves Motorsports Smog Block Off Plate for Kawasaki Ninja 650 / ER 650. The Graves Motorsports Smog Block Off Plate is designed to seal off the port on the valve cover used by the air injection system (a.k.a smog pumps or AIS). This product is intended for closed course competition use only. Use of this product for any other purpose is strictly prohibited.

Fitment: Kawasaki Ninja 650 / ER 650 2017 +

The air induction system (AIS) burns unburned exhaust gases by injecting fresh air (secondary air) into the exhaust port, reducing the emission of hydrocarbons.

Once this is capped off the air injection system can be safely removed. These Smog Block Off Plates are made from CNC'ed billet aluminum and feature the Graves Motorsports "G" logo. There are three reasons why you want to remove the air injection system from your bike;

  • 1. If you are using your motorcycle on a closed course (racing, track days, etc.) you will want to remove all unnecessary equipment from your bike for reduced weight and ease of maintenance.
  • 2. To get an accurate Air:Fuel (A/F) ratio when dynoing the bike. The air injection system pumps fresh air directly into the exhaust stream in order to burn off any unused fuel. Unfortunately by doing this the A/F ratio is thrown off by the extra "fresh air" in the exhaust stream. By removing the air injection system you can achieve an accurate A/F ratio.
  • 3. This addition will typically remove the majority of popping on deceleration that can be experienced with un-burnt gasses within the emission charcoal chamber. Note: Proper tuning may be needed and this is general feedback.
Item #: AB021
Condition: New
Please feel free to call us for ETA if no ‘Limited Supply’ is listed above.
Price: $29.99
Qty:

Description:
 
Graves Motorsports Smog Block Off Plate for Kawasaki Ninja EX400. The Graves Motorsports Smog Block Off Plate is designed to seal off the port on the valve cover used by the air injection system (a.k.a smog pumps or AIS). This product is intended for closed course competition use only. Use of this product for any other purpose is strictly prohibited.

Fitment: Kawasaki Ninja EX400 2018 +

The air induction system (AIS) burns unburned exhaust gases by injecting fresh air (secondary air) into the exhaust port, reducing the emission of hydrocarbons.

Once this is capped off the air injection system can be safely removed. These Smog Block Off Plates are made from CNC'ed billet aluminum and feature the Graves Motorsports "G" logo. There are three reasons why you want to remove the air injection system from your bike;

  • 1. If you are using your motorcycle on a closed course (racing, track days, etc.) you will want to remove all unnecessary equipment from your bike for reduced weight and ease of maintenance.
  • 2. To get an accurate Air:Fuel (A/F) ratio when dynoing the bike. The air injection system pumps fresh air directly into the exhaust stream in order to burn off any unused fuel. Unfortunately by doing this the A/F ratio is thrown off by the extra "fresh air" in the exhaust stream. By removing the air injection system you can achieve an accurate A/F ratio.
  • 3. This addition will typically remove the majority of popping on deceleration that can be experienced with un-burnt gasses within the emission charcoal chamber. Note: Proper tuning may be needed and this is general feedback.
Item #: AB020
Condition: New
Please feel free to call us for ETA if no ‘Limited Supply’ is listed above.
Price: $29.99
Qty:

Description: Graves Motorsports Kawasaki Sport Bike 10mm Swingarm Spools. The Graves Motorsports swingarm spool kits are available in 10mm and hard anodized in clear alumin finish. They are direct fitment motorcycle swingarm spool parts for bikes that have threaded spool bosses in the 10mm sizing). See direct fitment chart but these fit most Kawasaki sportbike units listed below.

Kawasaki ZX6R, ZX6, 636, ZX9R, ZX9, ZX10R, ZX10, ZX12R, ZX12, ZX14R, ZX14, ZZR 1200, 600, 900, Ninja (Make sure you have standard swingarms with the 10mm threaded mounts)

ols fit Yamaha motorcycles equipped with 6mm threaded spool bosses
Item #: PE012A
Condition: New
Please feel free to call us for ETA if no ‘Limited Supply’ is listed above.
Price: $24.95
Qty:

Description:
 
Graves Motorsports Smog Block Off Plate for Yamaha YZF-R3. The Graves Motorsports Smog Block Off Plate is designed to seal off the port on the valve cover used by the air injection system (a.k.a smog pumps or AIS). This product is intended for closed course competition use only. Use of this product for any other purpose is strictly prohibited.

Fitment: Yamaha R3 2015 -2019

The air induction system (AIS) burns unburned exhaust gases by injecting fresh air (secondary air) into the exhaust port, reducing the emission of hydrocarbons.

Once this is capped off the air injection system can be safely removed. These Smog Block Off Plates are made from CNC'ed billet aluminum and feature the Graves Motorsports "G" logo. There are three reasons why you want to remove the air injection system from your bike;

  • 1. If you are using your motorcycle on a closed course (racing, track days, etc.) you will want to remove all unnecessary equipment from your bike for reduced weight and ease of maintenance.
  • 2. To get an accurate Air:Fuel (A/F) ratio when dynoing the bike. The air injection system pumps fresh air directly into the exhaust stream in order to burn off any unused fuel. Unfortunately by doing this the A/F ratio is thrown off by the extra "fresh air" in the exhaust stream. By removing the air injection system you can achieve an accurate A/F ratio.
  • 3. This addition will typically remove the majority of popping on deceleration that can be experienced with un-burnt gasses within the emission charcoal chamber. Note: Proper tuning may be needed and this is general feedback.
Item #: AB008
Condition: New
Please feel free to call us for ETA if no ‘Limited Supply’ is listed above.
Price: $24.95
Qty:

Description:
Graves Motorsports Smog Block Off Plates for Yamaha model Sport Bikes. Graves Motorsports Smog Block Off Plates are designed to seal off the ports on the valve cover used by the air injection system (a.k.a smog pumps or AIS). Sold as set shownThis product is intended for closed course competition use only. Use of this product for any other purpose is strictly prohibited.
 
 
Fitment:
  • Yamaha R1 / R1M / R1S 2004-2019 + R6 2003-2019 + FZ-10 2017 + MT-10 2018-2019 + R6S 2006-2009 + FZ1 All + FZ8 All + FZ6 All


The air induction system (AIS) burns unburned exhaust gases by injecting fresh air (secondary air) into the exhaust port, reducing the emission of hydrocarbons.

Once these are capped off the air injection system can be safely removed. These Smog Block Off Plates are made from CNC'ed billet aluminum and feature the Graves Motorsports "G" logo. There are three reasons why you want to remove the air injection system from your bike;

  • 1. If you are using your motorcycle on a closed course (racing, track days, etc.) you will want to remove all unnecessary equipment from your bike for reduced weight and ease of maintenance.
  • 2. To get an accurate Air:Fuel (A/F) ratio when dynoing the bike. The air injection system pumps fresh air directly into the exhaust stream in order to burn off any unused fuel. Unfortunately by doing this the A/F ratio is thrown off by the extra "fresh air" in the exhaust stream. By removing the air injection system you can achieve an accurate A/F ratio.
  • 3. This addition will typically remove the majority of popping on deceleration that can be experienced with un-burnt gasses within the emission charcoal chamber. Note: Proper tuning may be needed and this is general feedback.
Item #: AB011
Condition: New
Limited Supply: Only 1 Left!
Please feel free to call us for ETA if no ‘Limited Supply’ is listed above.
Price: $38.95
Qty:

Description: Graves Motorsports Sport Bike Swingarm Spools. The Graves Motorsports swingarm spool kits are available in 6mm and 8mm sizes and come hard anodized in your choice of colors. They are direct fitment motorcycle swingarm spool parts for bikes that have threaded spool bosses. Use the pull down menu to select your desired size and color of motorcycle stand spools. Yamaha models such as the R1 and R6 use 6mm sizing. Honda and Suzuki sport bikes use the 8mm sizing. Sold as a set (Pair of 2). Graves Motorsports suggests using the lightweight Graves Swingarm Stand with these spools!

8mm spools fit Honda and Suzuki motorcycles equipped with 8mm threaded spool bosses and Kawasaki EX400
6mm spools fit Yamaha motorcycles equipped with 6mm threaded spool bosses
Item #: PE0
Condition: New
Please feel free to call us for ETA if no ‘Limited Supply’ is listed above.
Price: $19.99
Qty:

Description:

Graves Motorsports Swing-arm 8mm Spools for the Kawasaki ZX-10R / ZX-6R / Ninja 400. Precision CNC machined from 6061 T6 billet aluminum and black anodized then laser etched

Fitment:

  • Kawasaki ZX-10R 2016-2019
  • Kawasaki ZX-6R 2019
  • Kawasaki Ninja 400 18-19
  • (Make sure your year is listed older models use 10mm spools)
Item #: PE013K
Condition: New
Please feel free to call us for ETA if no ‘Limited Supply’ is listed above.
Price: $24.99
Qty:

Description: Aluminum Swing Arm Spools 10mm x 1.25
Item #: HHRSPOOLM10x1.25
Condition: New
Please feel free to call us for ETA if no ‘Limited Supply’ is listed above.
Price: $35.00
Qty:

Description: Aluminum Swing Arm Spools 6MM for Aprilia Yamaha
Item #: HHRSPOOLM6MM
Condition: New
Limited Supply: Only 3 Left!
Please feel free to call us for ETA if no ‘Limited Supply’ is listed above.
Price: $35.00
Sale: $27.50
Save: 21%
Save: $7.50
Qty:

Description: Aluminum Swing Arm Spools 8MM for BMW Honda Suzuki Triumph*
Item #: HHRSPOOLM8MM
Condition: New
Limited Supply: Only 5 Left!
Please feel free to call us for ETA if no ‘Limited Supply’ is listed above.
Price: $35.00
Sale: $27.50
Save: 21%
Save: $7.50
Qty:

Description: Quick Release Fairing Screw fasteners
Item #: HHRQRSCREW
Condition: New
Limited Supply: Only 6 Left!
Please feel free to call us for ETA if no ‘Limited Supply’ is listed above.
Price: $45.00
Sale: $29.95
Save: 33%
Save: $15.05
Qty:

Items 1-12 of 12


More About Blanking plates Fasteners & Swingarm spools

Mirror blanking plates are used for securing your mirrors when removed for Track use or for customization. Frame plugs plug off holes in the frame and swingarm axles giving a much cleaner look to your motorcycle and protecting that area from dirt and dust