HHR Performance - Flash Tune

Engine Electronics - Flash Tune

Browse Flash Tune Products

Sort
Clear Brand
View
 
Items 1-20 of 20
Description:
Flash Tune Kit Kawasaki Ninja EX300
The 2013-2017 Kawasaki Ninja EX300 Flash Tune Data-Link ECU Flashing Kits : Your bike already has a standalone ECU and now you can get the tools to program it! There is no longer any need to send away your ECU!

Fitment:

  • Fitment : Kawasaki Ninja EX300 2013-2017


This Interface allows you to easily adjust the following!

  • Remove ECU Restrictions
  • Engine Braking adjustments
  • High Load Fuel Maps (with PC3 and PC5 map importing)
  • Low Load (cruising) Fuel Maps
  • Fuel Injector Proportioning
  • Cylinder Specific Ignition Timing
  • Variable Stack RPM Adjustment
  • Cooling Fan Temp Adjustment
  • Remove Top Speed Limiter
  • Steering Damper Elimination
  • EXUP Valve Elimination
  • Force AIS Valve Closed
  • and new features are added regularly.


Bench ECU Flashing Kit Includes:
  • FTdataLink ECU Interface USB Cable
  • Bench Flashing Harness to flash your ECU outside of the bike
  • Power Supply for Bench flashing
  • FT ECU License to allow unlimited flashes for a single ecu


We believe everyone deserves the same tuning technology that until now was reserved for factory riders. With the FTEcu software you can remove the restrictions that the factory must put in place to meet strict street vehicle guidelines. By flashing your ECU you are able to tune your bike without interfering with critical correction factors resulting in smoother power gains than ever before possible.This product is for RACE USE ONLY! The included software will automatically update as new features are added!
Item #: FT-BNKT10
Condition: New
Price: $450.00

Qty:

Description: Flash Tune Quick Shifter Harness addition Yamaha R1 / R6 / Super Tenere : These harnesses allow for plug and play installation of a FlashTune / dynojet quick shifter sensor to be added to your motorcycle that is equipped with an FT Ecu flash tune and has quick shifting activated. Note: The dynojet PC5 push or pull sensor and shift rods are sold seperately.
Item #: FT-QSHA1
Condition: New
Price: $39.99
Qty:

Description:
The 2017 Yamaha R6 / 2015-2018 Yamaha R1 / R1M / R1S + 2017 FZ10 / 2018 MT-10  Flash Tune Data-Link ECU Flashing Kits : Your bike already has a standalone ECU and now you can get the tools to program it! There is no longer any need to send away your ECU! Note: Bench kit and the separate listing bike side kit do the same thing but one tunes off the bike and the other attaches to the bike. Scroll down for in depth kit information.Thank you. 

Fitment:

  • Yamaha R6 2017-2018 / Yamaha R1 2015-2018 / R1M 2015-2018 / R1S 2016-2017 / Yamaha FZ10 2017 / Yamaha MT-10 2018


This Interface allows you to easily adjust the following!

Remove ECU Restrictions
  • High Load Fuel Maps (PC5 map importing)
  • Low Load (cruising) Fuel Maps and Bias Mapping
  • Fuel Injector Proportioning
  • Engine Braking adjustments
  • Cylinder Specific Ignition Timing
  • Variable Stack RPM Adjustment
  • Cooling Fan Temp Adjustment
  • Remove Top Speed Limiter
  • Steering Damper Elimination
  • EXUP Valve Elimination
  • Force AIS Valve Closed
  • *This kit is also compatible with the R1M and R1S
  • and new features are added regularly.


Bench ECU Flashing Kit Includes:
  • FTdataLink ECU Interface USB Cable
  • Bench Flashing Harness to flash your ECU outside of the bike
  • Power Supply for Bench flashing
  • FT ECU License to allow unlimited flashes for a single ecu


We believe everyone deserves the same tuning technology that until now was reserved for factory riders. With the FTEcu software you can remove the restrictions that the factory must put in place to meet strict street vehicle guidelines. By flashing your ECU you are able to tune your bike without interfering with critical correction factors resulting in smoother power gains than ever before possible.This product is for RACE USE ONLY! The included software will automatically update as new features are added!
Item #: FT-BNKT18
Condition: New
Price: $450.00

Qty:

Description:
BIKE SIDE Flash Tune Data-Link ECU Flashing Kit : Your bike already has a standalone ECU and now you can get the tools to program it! There is no longer any need to send away your ECU!  See bike fitments for the different types of setups below- Thank you. Scroll down for in-depth kit information. 

Fitment:

  • Yamaha R1 2007-2008
  • Yamaha R6 2006-2007
  • Super Tenere 2012-2013 (BIKE SIDE HARNESS ONLY)


This Interface allows you to easily adjust the following!

  • Remove ECU Restrictions
  • Engine Braking adjustments
  • High Load Fuel Maps (with PC3 and PC5 map importing)
  • Low Load (cruising) Fuel Maps
  • Fuel Injector Proportioning
  • Ignition Timing
  • Immobilizer Function
  • Cooling Fan Temps
  • Rev-Limiter Control
  • Remove Top Speed Limiter
  • ECU Based Quick-shifting
  • Speedometer calibrations
  • and new features are added regularly.


Data-Link ECU Flashing Kit Includes:
  • FTdataLink ECU Interface USB Cable
  • Bike-side programming harness to permanently install on your bike

We believe everyone deserves the same tuning technology that until now was reserved for factory riders. With our software you can remove the restrictions that the factory must put in place to meet strict street vehicle guidelines. By flashing your ECU you are able to tune your bike without interfering with critical correction factors resulting in smoother power gains than ever before possible.This product is for RACE USE ONLY! The included software will automatically update as new features are added!
Item #: FT-FTDL1
Condition: New
Price: $380.00

Qty:

Description:
 
Flash Tune Data-Link ECU Flashing Kits : Your bike already has a standalone ECU and now you can get the tools to program it! There is no longer any need to send away your ECU! Select your desired options from the pull down menu. See bike fitments for the different types of setups below. Scroll down for indepth kit information.

Fitment:

  • Yamaha R6 2006-2007


This Interface allows you to easily adjust the following!

  • Remove ECU Restrictions
  • Engine Braking adjustments
  • High Load Fuel Maps (with PC3 and PC5 map importing)
  • Low Load (cruising) Fuel Maps
  • Fuel Injector Proportioning
  • Ignition Timing
  • Immobilizer Function
  • Cooling Fan Temps
  • Rev-Limiter Control
  • Remove Top Speed Limiter
  • ECU Based Quick-shifting
  • Speedometer calibrations
  • and new features are added regularly.


Bench ECU Flashing Kit Includes:
  • FTdataLink ECU Interface USB Cable
  • Bench Flashing Harness to flash your ECU outside of the bike
  • Power Supply for Bench flashing


We believe everyone deserves the same tuning technology that until now was reserved for factory riders. With our software you can remove the restrictions that the factory must put in place to meet strict street vehicle guidelines. By flashing your ECU you are able to tune your bike without interfering with critical correction factors resulting in smoother power gains than ever before possible.This product is for RACE USE ONLY! The included software will automatically update as new features are added!
Item #: FT-BNKT14
Condition: New
Price: $450.00

Qty:

Description:
 
Flash Tune Data-Link ECU Flashing Kits : Your bike already has a standalone ECU and now you can get the tools to program it! There is no longer any need to send away your ECU! Select your desired options from the pull down menu. See bike fitments for the different types of setups below. When ordering please include your bike's ECU # in the notes section at checkout to insure the proper setup is sent to you. Thank you. Scroll down for indepth kit information.

Fitment:

  • Yamaha R6 2008-2016 (BIKE SIDE HARNESS ONLY * see seperate listing for the bench kits for this bike)


This Interface allows you to easily adjust the following!

  • Remove ECU Restrictions
  • Engine Braking adjustments
  • High Load Fuel Maps (with PC3 and PC5 map importing)
  • Low Load (cruising) Fuel Maps
  • Fuel Injector Proportioning
  • Ignition Timing
  • Immobilizer Function
  • Cooling Fan Temps
  • Rev-Limiter Control
  • Remove Top Speed Limiter
  • ECU Based Quick-shifting
  • Speedometer calibrations
  • and new features are added regularly.


Data-Link ECU Flashing Kit Includes:
  • FTdataLink ECU Interface USB Cable
  • Bike-side programming harness to permanently install on your bike


We believe everyone deserves the same tuning technology that until now was reserved for factory riders. With our software you can remove the restrictions that the factory must put in place to meet strict street vehicle guidelines. By flashing your ECU you are able to tune your bike without interfering with critical correction factors resulting in smoother power gains than ever before possible.This product is for RACE USE ONLY! The included software will automatically update as new features are added!
Item #: FT-FTDL3
Condition: New
Price: $380.00

Qty:

Description:
 
Flash Tune Data-Link (Bike side) ECU Flashing Kits for the 2015-2017 Yamaha FZ-07,  2018-2019 MT-07 , XSR700 2016-2019and 2018-2019 R3 : Your bike already has a standalone ECU and now you can get the tools to program it! There is no longer any need to send away your ECU! Note: Bike side and the seperate listing bench tuning kit do the same thing but one tunes off the bike and the other attaches to the bike. Scroll down for indepth kit information.

Fitment:

  • Yamaha FZ-07 2015-2017 / MT-07 2018-2019 / XSR700 2016-2019 / R3 2018-2019


This Interface allows you to easily adjust the following!

  • Remove ECU Restrictions
  • High Load Fuel Maps (with PC3 and PC5 map importing)
  • Low Load (cruising) Fuel Maps and Bias Mapping
  • Cylinder Specific Ignition Timing
  • Cooling Fan Temp Adjustment
  • Disable Injector Decel cut-off
  • and new features are added regularly.


Data-Link ECU Flashing Bike Side Kit Includes:
  • FTdataLink ECU Interface USB Cable
  • Bike-side programming harness to permanently install on your bike
  • FT ECU License to allow unlimited flashes for a single ecu


We believe everyone deserves the same tuning technology that until now was reserved for factory riders. With the FTEcu software you can remove the restrictions that the factory must put in place to meet strict street vehicle guidelines. By flashing your ECU you are able to tune your bike without interfering with critical correction factors resulting in smoother power gains than ever before possible.This product is for RACE USE ONLY! The included software will automatically update as new features are added!
Item #: FT-FTDL9
Condition: New
Price: $380.00

Qty:

Description:
The 2017 CBR1000rr Flash Tune Data-Link ECU Flashing Kits : Your bike already has a standalone ECU and now you can get the tools to program it! There is no longer any need to send away your ECU! Note: Bench kit and the separate listing bike side kit do the same thing but, the bench kit tunes by removing the ECU from the bike and connecting it to a computer. The separately listed bike side kit mounts a small harness to the bike permanently to access tuning. Scroll down for in depth kit information.
 
 
Fitment:

  • Honda CBR1000rr 2017

This Interface allows you to easily adjust the following! 
 
  • Remove ECU Restrictions
  • High Load Fuel Maps
  • Low Load (cruising) Fuel Maps and Bias Mapping
  • Cylinder Specific Ignition Timing by Gear
  • Throttle by Wire Adjustments
  • See screen shot for list of current features

Bench ECU Flashing Kit Includes:

  • FTdataLink ECU Interface USB Cable
  • Bench Flashing Harness to flash your ECU outside of the bike
  • Power Supply for Bench flashing
  • FT ECU License to allow unlimited flashes for a single ecu
We believe everyone deserves the same tuning technology that until now was reserved for factory riders. With the FTEcu software you can remove the restrictions that the factory must put in place to meet strict street vehicle guidelines. By flashing your ECU you are able to tune your bike without interfering with critical correction factors resulting in smoother power gains than ever before possible.This product is for RACE USE ONLY! The included software will automatically update as new features are added!
Item #: FT-4P_BNKT_09
Condition: New
Price: $450.00

Qty:

Description:
The 2019 Kawasaki ZX-6R and 2017-2019 Z900 Tune Data-Link ECU Flashing Kits : Your bike already has a standalone ECU and now you can get the tools to program it! There is no longer any need to send away your ECU! Note: Bench kit and the separate listing bike side kit do the same thing but one tunes off the bike and the other attaches to the bike. Scroll down for in depth kit information.Thank you. 

Fitment:

  • Kawasaki ZX-6R 2019 + Kawasaki Z900 2017-2019


This Interface allows you to easily adjust the following! 
 
  • Remove ECU Restrictions
  • Engine Braking adjustments
  • High Load Fuel Maps (with PC3 and PC5 map importing)
  • Low Load (cruising) Fuel Maps
  • Fuel Injector Proportioning
  • Ignition Timing
  • Immobilizer Function
  • Cooling Fan Temps
  • Rev-Limiter Control
  • Remove Top Speed Limiter
  • ECU Based Quick-shifting
  • and new features are added regularly.

Bench ECU Flashing Kit Includes:
  • FTdataLink ECU Interface USB Cable
  • Bench Flashing Harness to flash your ECU outside of the bike
  • Power Supply for Bench flashing
  • FT ECU License to allow unlimited flashes for a single ecu


We believe everyone deserves the same tuning technology that until now was reserved for factory riders. With the FTEcu software you can remove the restrictions that the factory must put in place to meet strict street vehicle guidelines. By flashing your ECU you are able to tune your bike without interfering with critical correction factors resulting in smoother power gains than ever before possible.This product is for RACE USE ONLY! The included software will automatically update as new features are added!
Item #: FT-BNKT23
Condition: New
Price: $450.00

Qty:

Description:
Replacement FTEcu bike side harness for the 2019 Kawasaki ZX-6R. These replacement harness are good when you have multiple bikes and just one tuning cable (ZX-6R 2019 requires a 6 pin tuning cable) or when you need replacement harnesses. 

Fitment:
  • Kawasaki ZX-6R 2019
Item #: FT-BSHA13
Condition: New
Price: $49.95
Qty:

Description:
The 2018-2019 Kawasaki Ninja EX400 Tune Data-Link ECU Flashing Kits : Your bike already has a standalone ECU and now you can get the tools to program it! There is no longer any need to send away your ECU! Note: Bench kit and the separate listing bike side kit do the same thing but one tunes off the bike and the other attaches to the bike. Scroll down for in depth kit information.Thank you. 

Fitment:

  • Kawasaki Ninja EX400 2018-2019
  • Kawasaki Ninja 650 2018-2019
  • Kawasaki Z650 2018-2019


This Interface allows you to easily adjust the following! 
 
  • Remove ECU Restrictions
  • High Load Fuel Maps (with PC3 and PC5 map importing)
  • Low Load (cruising) Fuel Maps and Bias Mapping
  • Cylinder Specific Ignition Timing by Gear
  • Throttle by Wire Adjustments
  • Engine Braking Adjustments
  • Cooling Fan Temp Adjustment
  • Disable Injector Decel cut-off
  • and new features are added regularly.
  • See screen shot for list of current features
 

Bench ECU Flashing Kit Includes:
  • FTdataLink ECU Interface USB Cable
  • Bench Flashing Harness to flash your ECU outside of the bike
  • Power Supply for Bench flashing
  • FT ECU License to allow unlimited flashes for a single ecu


We believe everyone deserves the same tuning technology that until now was reserved for factory riders. With the FTEcu software you can remove the restrictions that the factory must put in place to meet strict street vehicle guidelines. By flashing your ECU you are able to tune your bike without interfering with critical correction factors resulting in smoother power gains than ever before possible.This product is for RACE USE ONLY! The included software will automatically update as new features are added!
Item #: FT-BNKT22
Condition: New
Price: $450.00

Qty:

Description:
 
Flash Tune Data-Link ECU Flashing Kits : Your bike already has a standalone ECU and now you can get the tools to program it! There is no longer any need to send away your ECU. Scroll down for in-depth kit information.

Fitment:

  • Yamaha FZ-07 2015-2017 / MT-07 2018-2019 / XSR900 2016-2019 / R3 2018-2019


This Interface allows you to easily adjust the following!

  • Remove ECU Restrictions
  • High Load Fuel Maps (with PC3 and PC5 map importing)
  • Low Load (cruising) Fuel Maps and Bias Mapping
  • Cylinder Specific Ignition Timing
  • Cooling Fan Temp Adjustment
  • Disable Injector Decel cut-off
  • and new features are added regularly.


Bench ECU Flashing Kit Includes:
  • FTdataLink ECU Interface USB Cable
  • Bench Flashing Harness to flash your ECU outside of the bike
  • Power Supply for Bench flashing
  • FT ECU License to allow unlimited flashes for a single ecu


We believe everyone deserves the same tuning technology that until now was reserved for factory riders. With our software you can remove the restrictions that the factory must put in place to meet strict street vehicle guidelines. By flashing your ECU you are able to tune your bike without interfering with critical correction factors resulting in smoother power gains than ever before possible.This product is for RACE USE ONLY! The included software will automatically update as new features are added!
Item #: FT-BNKT19
Condition: New
Price: $450.00

Qty:

Description:
The 2015-2017 Yamaha R3 Tune Data-Link ECU Flashing Kits : Your bike already has a standalone ECU and now you can get the tools to program it! There is no longer any need to send away your ECU! Note: Bench kit and the separate listing bike side kit do the same thing but one tunes off the bike and the other attaches to the bike. Scroll down for in depth kit information.Thank you. 

Fitment:

  • Yamaha R3 2015-2017


This Interface allows you to easily adjust the following! 
 
  • Remove ECU Restrictions
  • High Load Fuel Maps (with PC3 and PC5 map importing)
  • Low Load (cruising) Fuel Maps and Bias Mapping
  • Cylinder Specific Ignition Timing by Gear
  • Throttle by Wire Adjustments
  • Engine Braking Adjustments
  • Cooling Fan Temp Adjustment
  • Disable Injector Decel cut-off
  • and new features are added regularly.
  • See screen shot for list of current features
 

Bench ECU Flashing Kit Includes:
  • FTdataLink ECU Interface USB Cable
  • Bench Flashing Harness to flash your ECU outside of the bike
  • Power Supply for Bench flashing
  • FT ECU License to allow unlimited flashes for a single ecu


We believe everyone deserves the same tuning technology that until now was reserved for factory riders. With the FTEcu software you can remove the restrictions that the factory must put in place to meet strict street vehicle guidelines. By flashing your ECU you are able to tune your bike without interfering with critical correction factors resulting in smoother power gains than ever before possible.This product is for RACE USE ONLY! The included software will automatically update as new features are added!
Item #: FT-4P_BNKT_08
Condition: New
Price: $450.00

Qty:

Description: Flash Tune Data-Link (Bike side) ECU Flashing Kits for the 2015-2017 Yamaha R3 : Your bike already has a standalone ECU and now you can get the tools to program it! There is no longer any need to send away your ECU! Note: Bike side kit attaches to the bike to allow lap top access with the included 4pin tuning cable.


This Interface allows you to easily adjust the following!

Remove ECU Restrictions
High Load Fuel Maps (with PC3 and PC5 map importing)
Low Load (cruising) Fuel Maps and Bias Mapping
Cylinder Specific Ignition Timing
Cooling Fan Temp Adjustment
Disable Injector Decel cut-off
and new features are added regularly.



Data-Link ECU Flashing Bike Side Kit Includes:

FTdataLink ECU Interface USB Cable
Bike-side programming harness to permanently install on your bike
FT ECU License to allow unlimited flashes for a single ecu



We believe everyone deserves the same tuning technology that until now was reserved for factory riders. With the FTEcu software you can remove the restrictions that the factory must put in place to meet strict street vehicle guidelines. By flashing your ECU you are able to tune your bike without interfering with critical correction factors resulting in smoother power gains than ever before possible.This product is for RACE USE ONLY! The included software will automatically update as new features are added!
Item #: FT-4P_FTDL_06
Condition: New
Price: $380.00

Qty:

Description:
 
FTEcu Yamaha R6 2017-2019 : ECU Based Auto-Blipper Kit. Works great with the "GravesSpec" FTEcu map and when activated not only allows clutch up-shifting but adds smooth downshifting without using the clutch!

With this kit and your flashed ECU you can downshift smoother than would otherwise be possible without pulling the clutch! The latest generation of R6 models is finally capable of producing smooth fast clutch-less downshifting! After five years of development we are proud to release the best auto-blipper available.

This system provides smoother clutch-less downshifting that rivals even the OEM’s like BMW and Ducati

This kit requires:
  • FTECU Flashing Kit and licensed ECU

This kit includes:
 
  • 1 Push Type QSS/Blip Shift Sensor
  • 1 Pull Type QSS/Blip Shift Sensor
  • 1 Type A shift rod
  • The two sensors together will replace your OEM pull type sensor
  • QSS/Blipper Harness to connect your new sensors to your ECU (Stock or Kit Harness).
  • Scratch-off Activation Card to authorize the auto-blipper to be used with your tuning license.

Fitment: Yamaha R6 2017-2019
Item #: FTEJ_AB_R6
Condition: New
Price: $400.00

Qty:

Description:
 
Flash Tune ECU Based Auto-Blipper Kit for the 2016-2019 Kawasaki ZX10-R

With this kit and your flashed ECU you can downshift smoother than would otherwise be possible without pulling the clutch! The latest generation of the ZX10r models is finally capable of producing smooth fast clutch-less downshifting! After four years of development we are proud to release the best auto-blipper available. This system provides positive feeling clutch-less downshifting that rivals even the OEM’s like BMW and Ducati

Note: This kit requires:
  • FTECU Flashing Kit and licensed ECU
  • This kit requires no additional hardware


This feature will be sent as an activation code on your invoice within 1 business day.

Fitment : Kawasaki ZX10r 2016-2019

Item #: FT-16ZX10_AB
Condition: New
Price: $400.00

Qty:

Description:
Graves Motorsports EXUP Eliminator is a direct fitment for the Yamaha R1 (2004-2006) and the all new Yamaha R6 (2017). Simple plug-and-play application allows the removal of the EXUP valve and motor without the "Check Engine light" being activated when using a full racing or slip-on exhaust. Furthers the weight savings after EXUP removal and allows for a cleaner appearance. 

Fitment: 2004-2006 Yamaha R1 / 2017-2019 Yamaha R6
Item #: ELY-06R1-EX
Condition: New
Price: $64.95
Sale: $58.46
Save: 10%
Save: $6.49

Qty:

Description:
Graves Motorsports Yamaha R1 Smog Block Off Plugs 98-03
Graves Motorsports Yamaha R1 Smog Block Off Plugs for the 98-03 model year motorcycles. Graves Motorsports Smog Block Off Plates are designed to seal off the ports on the cylinder head used by the air injection system (a.k.a smog pumps or AIS). Once these are capped off the air injection system can be safely removed. These Smog Block Off Plates are made from machined aluminum. There are two reasons why you want to remove the air injection system from your bike:

  • If you are using your motorcycle on a closed course (racing, track days, etc.) you will want to remove all unnecessary equipment from your bike for reduced weight and ease of maintenance.
  • To get an accurate Air:Fuel (A/F) ratio when dynoing the bike. The air injection system pumps fresh air directly into the exhaust stream in order to burn off any unused fuel. Unfortunately by doing this the A/F ratio is thrown off by the extra "fresh air" in the exhaust stream. By removing the air injection system you can achieve an accurate A/F ratio.

      Sold set of four
Item #: AB007
Condition: New
Price: $24.95
Qty:

Description:
 
Graves Motorsports Yamaha R1 + R6 + R6S+ FZ1 + FZ8 + FZ09 + FZ10 Turn Signals. These are super bright LED marker lights include the factory style connectors. This means the Graves marker lights do not require soldering to plug directly into your motorcycle, for quick installation. The motorcycle turn signals are easy for surrounding traffic to see. A perfect compliment to your Yamaha sport bike. NOTE: The 2016-2017 R1 and 2017 FZ10 works awesome with these signals but requires changing the plug end to fit respectively.

Front marker lights sit in the OEM signal pockets offering a clean, factory look. Rear marker lights can be used with either the stock fender (signal wiring length may require extending on some models for the rear setup) or Graves Motorsports Fender Eliminator Kit. Comes with 2 signals per purchase (enough to do either the front or the back of the bike). Keep in mind LED's have little resistance on your motorcycle and in most cases a flasher relay will be required to even out the flashing rates of your motorcycle.

FITMENT: Yamaha R1 2004-2014 + R6 2003-2017 (2017-2018 rear only with Graves Fender) + R6S 2006-2009 + FZ1 2006-2015 + FZ8 (all) + FZ09 (all) + MT-07 (all) + MT-09 (all) + MT-10 (all)
Item #: TS401C1
Condition: New
Price: $99.99

Qty:

Description: Flash Tune ECU Based Auto-Blipper shifter Kits for the 2017 Yamaha FZ10 / 2018 Yamaha MT-10

Use this kit alongside your FTEcu flashed ECU to activate clutchless up shifting without letting off the throttle AND SMOOTH FAST clutch-less DOWNSHIFTING! After years of development we are proud to release the best auto-blipper available. This system provides positive feeling clutch-less downshifting that rivals even the OEM’s like BMW and Ducati. Note: This kit requires a active FTEcu license for the FZ10 you are mounting it on. The included activation code must be added to your' setup and the flash updated back to the bike.
Item #: FT-FTE_AB_FZ10
Condition: New
Price: $800.00
Sale: $720.00
Save: 10%
Save: $80.00

Qty:

Items 1-20 of 20

Popular Brands: