- Home »
- Catalog »
- Accessories »
- Thermal Heat Shield Kits
HHR Performance - Thermal Heat Shield Kits
Thermal Heat sheild for protecting bodywork and for insulating airboxes and battery trays ECU's etc
Browse Thermal Heat Shield Kits Products
Items 1-14 of 14
Description:
Teknofibra Extra Light Thermal Reflective Belly Pan Kit 30"x12"' .8mm Thickness 0121710638
-Comes with installation kit with Catalog with Install instructions Aluminum tape and an application tool.
-30" x 12"'
-.8mm Thickness
-Non Toxic material that reflects heat, flame, and insulates from sound.
-Used for Insulating fairings on Motorcycles, Cars, Aircraft and many other applications.
-Comes with installation kit with Catalog with Install instructions Aluminum tape and an application tool.
-30" x 12"'
-.8mm Thickness
-Non Toxic material that reflects heat, flame, and insulates from sound.
-Used for Insulating fairings on Motorcycles, Cars, Aircraft and many other applications.
Item #: 0121710638
Condition:
New
On-hand inventory ships within 24 hours, When out of stock Please expect a 2-to-4-week ETA from manufacturer. Please feel free to contact us for any
questions.
Price: $79.38
Description:
Teknofibra Heat shield material is designed to keep any radiant temperature from the engine or exhaust from heating up the fuel in the tank.
Cooler fuel = better performance.
Heat is the enemy when it comes to robbing power.
Its not just only the water temperature that you need to keep cool for optimum performance, Keeping your fuel cool produces the best power and why spend that extra money on race fuel if it is not staying cool.
Ever wonder why teams keep their fuel in fridges or on ice? add it at the last minute? Not to mention when it heats up it expands and it could be the difference of fitting that last 1/8th of a gallon in to finish that race!
These kits come pre cut to fit your model motorcycle , all you need to do is remove any factory heat sheild material clean with a degreaser and install your Teknofibra material , It really is simple.
This material is thinner and lighter than the material that comes from the factory which is a mineral based fiber.
Teknofibra is unlike anything else and will not burn or catch fire, it is non toxic and has proven to keep fuel temps up to 48degrees F cooler than oem material
Technical partner of JIR, Teknofibra® has long been known in the industry and used by prestigious Moto2, World Superbike, CIV and many others teams, for the following applications:
Protection of fairing and belly positioned in close proximity of the exhaust pipes.
Interposed between air box and throttle body allows the aspiration of cold air.
Glued under the tank keeps the lower the fuel temperature.
It maintains a stable temperature of the gas /oil on the nitrogen tank bladder of the dampers installed near the exhaust pipes.
Protects the battery and wiring avoiding problems to the ECU.
Protection of electronic components in hot areas.
Under the saddle and the cowl cover It protects the rider from the heat transmitted from the engine and the exhaust system.
More generally, to solve any problem of heat.
Cooler fuel = better performance.
Heat is the enemy when it comes to robbing power.
Its not just only the water temperature that you need to keep cool for optimum performance, Keeping your fuel cool produces the best power and why spend that extra money on race fuel if it is not staying cool.
Ever wonder why teams keep their fuel in fridges or on ice? add it at the last minute? Not to mention when it heats up it expands and it could be the difference of fitting that last 1/8th of a gallon in to finish that race!
These kits come pre cut to fit your model motorcycle , all you need to do is remove any factory heat sheild material clean with a degreaser and install your Teknofibra material , It really is simple.
This material is thinner and lighter than the material that comes from the factory which is a mineral based fiber.
Teknofibra is unlike anything else and will not burn or catch fire, it is non toxic and has proven to keep fuel temps up to 48degrees F cooler than oem material
Technical partner of JIR, Teknofibra® has long been known in the industry and used by prestigious Moto2, World Superbike, CIV and many others teams, for the following applications:
Protection of fairing and belly positioned in close proximity of the exhaust pipes.
Interposed between air box and throttle body allows the aspiration of cold air.
Glued under the tank keeps the lower the fuel temperature.
It maintains a stable temperature of the gas /oil on the nitrogen tank bladder of the dampers installed near the exhaust pipes.
Protects the battery and wiring avoiding problems to the ECU.
Protection of electronic components in hot areas.
Under the saddle and the cowl cover It protects the rider from the heat transmitted from the engine and the exhaust system.
More generally, to solve any problem of heat.
Item #: 400103002
Condition:
New
Limited Supply: Only 9 Left!
On-hand inventory ships within 24 hours,
Price: $173.25
Description:
Teknofibra Heat shield material is designed to keep any radiant temperature from the engine or exhaust from heating up the fuel in the tank.
Cooler fuel = better performance.
Heat is the enemy when it comes to robbing power.
Its not just only the water temperature that you need to keep cool for optimum performance, Keeping your fuel cool produces the best power and why spend that extra money on race fuel if it is not staying cool.
Ever wonder why teams keep their fuel in fridges or on ice? add it at the last minute? Not to mention when it heats up it expands and it could be the difference of fitting that last 1/8th of a gallon in to finish that race!
These kits come pre cut to fit your model motorcycle , all you need to do is remove any factory heat sheild material clean with a degreaser and install your Teknofibra material , It really is simple.
This material is thinner and lighter than the material that comes from the factory which is a mineral based fiber.
Teknofibra is unlike anything else and will not burn or catch fire, it is non toxic and has proven to keep fuel temps up to 48degrees F cooler than oem material
Technical partner of JIR, Teknofibra® has long been known in the industry and used by prestigious Moto2, World Superbike, CIV and many others teams, for the following applications:
Protection of fairing and belly positioned in close proximity of the exhaust pipes.
Interposed between air box and throttle body allows the aspiration of cold air.
Glued under the tank keeps the lower the fuel temperature.
It maintains a stable temperature of the gas /oil on the nitrogen tank bladder of the dampers installed near the exhaust pipes.
Protects the battery and wiring avoiding problems to the ECU.
Protection of electronic components in hot areas.
Under the saddle and the cowl cover It protects the rider from the heat transmitted from the engine and the exhaust system.
More generally, to solve any problem of heat.
Cooler fuel = better performance.
Heat is the enemy when it comes to robbing power.
Its not just only the water temperature that you need to keep cool for optimum performance, Keeping your fuel cool produces the best power and why spend that extra money on race fuel if it is not staying cool.
Ever wonder why teams keep their fuel in fridges or on ice? add it at the last minute? Not to mention when it heats up it expands and it could be the difference of fitting that last 1/8th of a gallon in to finish that race!
These kits come pre cut to fit your model motorcycle , all you need to do is remove any factory heat sheild material clean with a degreaser and install your Teknofibra material , It really is simple.
This material is thinner and lighter than the material that comes from the factory which is a mineral based fiber.
Teknofibra is unlike anything else and will not burn or catch fire, it is non toxic and has proven to keep fuel temps up to 48degrees F cooler than oem material
Technical partner of JIR, Teknofibra® has long been known in the industry and used by prestigious Moto2, World Superbike, CIV and many others teams, for the following applications:
Protection of fairing and belly positioned in close proximity of the exhaust pipes.
Interposed between air box and throttle body allows the aspiration of cold air.
Glued under the tank keeps the lower the fuel temperature.
It maintains a stable temperature of the gas /oil on the nitrogen tank bladder of the dampers installed near the exhaust pipes.
Protects the battery and wiring avoiding problems to the ECU.
Protection of electronic components in hot areas.
Under the saddle and the cowl cover It protects the rider from the heat transmitted from the engine and the exhaust system.
More generally, to solve any problem of heat.
Item #: 400103003
Condition:
New
Limited Supply: Only 1 Left!
On-hand inventory ships within 24 hours,
Price: $173.25
Description:
Thermal Heat protection for fuel tank
Teknofibra Heat shield material is designed to keep any radiant temperature from the engine or exhaust from heating up the fuel in the tank.
Cooler fuel = better performance.
Heat is the enemy when it comes to robbing power.
Its not just only the water temperature that you need to keep cool for optimum performance, Keeping your fuel cool produces the best power and why spend that extra money on race fuel if it is not staying cool.
Ever wonder why teams keep their fuel in fridges or on ice? add it at the last minute? Not to mention when it heats up it expands and it could be the difference of fitting that last 1/8th of a gallon in to finish that race!
These kits come pre cut to fit your model motorcycle , all you need to do is remove any factory heat sheild material clean with a degreaser and install your Teknofibra material , It really is simple.
This material is thinner and lighter than the material that comes from the factory which is a mineral based fiber.
Teknofibra is unlike anything else and will not burn or catch fire, it is non toxic and has proven to keep fuel temps up to 48degrees F cooler than oem material
Technical partner of JIR, Teknofibra® has long been known in the industry and used by prestigious Moto2, World Superbike, CIV and many others teams, for the following applications:
Protection of fairing and belly positioned in close proximity of the exhaust pipes.
Interposed between air box and throttle body allows the aspiration of cold air.
Glued under the tank keeps the lower the fuel temperature.
It maintains a stable temperature of the gas /oil on the nitrogen tank bladder of the dampers installed near the exhaust pipes.
Protects the battery and wiring avoiding problems to the ECU.
Protection of electronic components in hot areas.
Under the saddle and the cowl cover It protects the rider from the heat transmitted from the engine and the exhaust system.
More generally, to solve any problem of heat.
Teknofibra Heat shield material is designed to keep any radiant temperature from the engine or exhaust from heating up the fuel in the tank.
Cooler fuel = better performance.
Heat is the enemy when it comes to robbing power.
Its not just only the water temperature that you need to keep cool for optimum performance, Keeping your fuel cool produces the best power and why spend that extra money on race fuel if it is not staying cool.
Ever wonder why teams keep their fuel in fridges or on ice? add it at the last minute? Not to mention when it heats up it expands and it could be the difference of fitting that last 1/8th of a gallon in to finish that race!
These kits come pre cut to fit your model motorcycle , all you need to do is remove any factory heat sheild material clean with a degreaser and install your Teknofibra material , It really is simple.
This material is thinner and lighter than the material that comes from the factory which is a mineral based fiber.
Teknofibra is unlike anything else and will not burn or catch fire, it is non toxic and has proven to keep fuel temps up to 48degrees F cooler than oem material
Technical partner of JIR, Teknofibra® has long been known in the industry and used by prestigious Moto2, World Superbike, CIV and many others teams, for the following applications:
Protection of fairing and belly positioned in close proximity of the exhaust pipes.
Interposed between air box and throttle body allows the aspiration of cold air.
Glued under the tank keeps the lower the fuel temperature.
It maintains a stable temperature of the gas /oil on the nitrogen tank bladder of the dampers installed near the exhaust pipes.
Protects the battery and wiring avoiding problems to the ECU.
Protection of electronic components in hot areas.
Under the saddle and the cowl cover It protects the rider from the heat transmitted from the engine and the exhaust system.
More generally, to solve any problem of heat.
Item #: 400101001
Condition:
New
Limited Supply: Only 6 Left!
On-hand inventory ships within 24 hours, When out of stock Please expect a 2-to-4-week ETA from manufacturer. Please feel free to contact us for any questions.
Price: $173.25
Description:
Teknofibra Heat shield material is designed to keep any radiant temperature from the engine or exhaust from heating up the fuel in the tank.
Cooler fuel = better performance.
Heat is the enemy when it comes to robbing power.
Its not just only the water temperature that you need to keep cool for optimum performance, Keeping your fuel cool produces the best power and why spend that extra money on race fuel if it is not staying cool.
Ever wonder why teams keep their fuel in fridges or on ice? add it at the last minute? Not to mention when it heats up it expands and it could be the difference of fitting that last 1/8th of a gallon in to finish that race!
These kits come pre cut to fit your model motorcycle , all you need to do is remove any factory heat sheild material clean with a degreaser and install your Teknofibra material , It really is simple.
This material is thinner and lighter than the material that comes from the factory which is a mineral based fiber.
Teknofibra is unlike anything else and will not burn or catch fire, it is non toxic and has proven to keep fuel temps up to 48degrees F cooler than oem material
Technical partner of JIR, Teknofibra® has long been known in the industry and used by prestigious Moto2, World Superbike, CIV and many others teams, for the following applications:
Protection of fairing and belly positioned in close proximity of the exhaust pipes.
Interposed between air box and throttle body allows the aspiration of cold air.
Glued under the tank keeps the lower the fuel temperature.
It maintains a stable temperature of the gas /oil on the nitrogen tank bladder of the dampers installed near the exhaust pipes.
Protects the battery and wiring avoiding problems to the ECU.
Protection of electronic components in hot areas.
Under the saddle and the cowl cover It protects the rider from the heat transmitted from the engine and the exhaust system.
More generally, to solve any problem of heat.
Cooler fuel = better performance.
Heat is the enemy when it comes to robbing power.
Its not just only the water temperature that you need to keep cool for optimum performance, Keeping your fuel cool produces the best power and why spend that extra money on race fuel if it is not staying cool.
Ever wonder why teams keep their fuel in fridges or on ice? add it at the last minute? Not to mention when it heats up it expands and it could be the difference of fitting that last 1/8th of a gallon in to finish that race!
These kits come pre cut to fit your model motorcycle , all you need to do is remove any factory heat sheild material clean with a degreaser and install your Teknofibra material , It really is simple.
This material is thinner and lighter than the material that comes from the factory which is a mineral based fiber.
Teknofibra is unlike anything else and will not burn or catch fire, it is non toxic and has proven to keep fuel temps up to 48degrees F cooler than oem material
Technical partner of JIR, Teknofibra® has long been known in the industry and used by prestigious Moto2, World Superbike, CIV and many others teams, for the following applications:
Protection of fairing and belly positioned in close proximity of the exhaust pipes.
Interposed between air box and throttle body allows the aspiration of cold air.
Glued under the tank keeps the lower the fuel temperature.
It maintains a stable temperature of the gas /oil on the nitrogen tank bladder of the dampers installed near the exhaust pipes.
Protects the battery and wiring avoiding problems to the ECU.
Protection of electronic components in hot areas.
Under the saddle and the cowl cover It protects the rider from the heat transmitted from the engine and the exhaust system.
More generally, to solve any problem of heat.
Item #: 0121710636
Condition:
New
Not currently available
Price: $173.25
Description:
Teknofibra Heat shield material is designed to keep any radiant temperature from the engine or exhaust from heating up the fuel in the tank.
Cooler fuel = better performance.
Heat is the enemy when it comes to robbing power.
Its not just only the water temperature that you need to keep cool for optimum performance, Keeping your fuel cool produces the best power and why spend that extra money on race fuel if it is not staying cool.
Ever wonder why teams keep their fuel in fridges or on ice? add it at the last minute? Not to mention when it heats up it expands and it could be the difference of fitting that last 1/8th of a gallon in to finish that race!
These kits come pre cut to fit your model motorcycle , all you need to do is remove any factory heat sheild material clean with a degreaser and install your Teknofibra material , It really is simple.
This material is thinner and lighter than the material that comes from the factory which is a mineral based fiber.
Teknofibra is unlike anything else and will not burn or catch fire, it is non toxic and has proven to keep fuel temps up to 48degrees F cooler than oem material
Technical partner of JIR, Teknofibra® has long been known in the industry and used by prestigious Moto2, World Superbike, CIV and many others teams, for the following applications:
Protection of fairing and belly positioned in close proximity of the exhaust pipes.
Interposed between air box and throttle body allows the aspiration of cold air.
Glued under the tank keeps the lower the fuel temperature.
It maintains a stable temperature of the gas /oil on the nitrogen tank bladder of the dampers installed near the exhaust pipes.
Protects the battery and wiring avoiding problems to the ECU.
Protection of electronic components in hot areas.
Under the saddle and the cowl cover It protects the rider from the heat transmitted from the engine and the exhaust system.
More generally, to solve any problem of heat.
2017-19 Honda CBR-1000RR SP2
Teknofibra Heat shield material is designed to keep any radiant temperature from the engine or exhaust from heating up the fuel in the tank.
Cooler fuel = better performance.
Heat is the enemy when it comes to robbing power.
Its not just only the water temperature that you need to keep cool for optimum performance, Keeping your fuel cool produces the best power and why spend that extra money on race fuel if it is not staying cool.
Ever wonder why teams keep their fuel in fridges or on ice? add it at the last minute? Not to mention when it heats up it expands and it could be the difference of fitting that last 1/8th of a gallon in to finish that race!
These kits come pre cut to fit your model motorcycle , all you need to do is remove any factory heat sheild material clean with a degreaser and install your Teknofibra material , It really is simple.
This material is thinner and lighter than the material that comes from the factory which is a mineral based fiber.
Teknofibra is unlike anything else and will not burn or catch fire, it is non toxic and has proven to keep fuel temps up to 48degrees F cooler than oem material
Technical partner of JIR, Teknofibra® has long been known in the industry and used by prestigious Moto2, World Superbike, CIV and many others teams, for the following applications:
Protection of fairing and belly positioned in close proximity of the exhaust pipes.
Interposed between air box and throttle body allows the aspiration of cold air.
Glued under the tank keeps the lower the fuel temperature.
It maintains a stable temperature of the gas /oil on the nitrogen tank bladder of the dampers installed near the exhaust pipes.
Protects the battery and wiring avoiding problems to the ECU.
Protection of electronic components in hot areas.
Under the saddle and the cowl cover It protects the rider from the heat transmitted from the engine and the exhaust system.
More generally, to solve any problem of heat.
Item #: 40010102002
Condition:
New
On-hand inventory ships within 24 hours, When out of stock Please expect a 2-to-4-week ETA from manufacturer. Please feel free to contact us for any questions.
Description:
Teknofibra Fuel Tank Thermal Insulation Kit CBR1000RR-R 2020-22 0121710635
Teknofibra Heat shield material is designed to keep any radiant temperature from the engine or exhaust from heating up the fuel in the tank.
Cooler fuel = better performance.
Heat is the enemy when it comes to robbing power.
Its not just only the water temperature that you need to keep cool for optimum performance, Keeping your fuel cool produces the best power and why spend that extra money on race fuel if it is not staying cool.
Ever wonder why teams keep their fuel in fridges or on ice? add it at the last minute? Not to mention when it heats up it expands and it could be the difference of fitting that last 1/8th of a gallon in to finish that race!
These kits come pre cut to fit your model motorcycle , all you need to do is remove any factory heat sheild material clean with a degreaser and install your Teknofibra material , It really is simple.
This material is thinner and lighter than the material that comes from the factory which is a mineral based fiber.
Teknofibra is unlike anything else and will not burn or catch fire, it is non toxic and has proven to keep fuel temps up to 48degrees F cooler than oem material
Technical partner of JIR, Teknofibra® has long been known in the industry and used by prestigious Moto2, World Superbike, CIV and many others teams, for the following applications:
Protection of fairing and belly positioned in close proximity of the exhaust pipes.
Interposed between air box and throttle body allows the aspiration of cold air.
Glued under the tank keeps the lower the fuel temperature.
It maintains a stable temperature of the gas /oil on the nitrogen tank bladder of the dampers installed near the exhaust pipes.
Protects the battery and wiring avoiding problems to the ECU.
Protection of electronic components in hot areas.
Under the saddle and the cowl cover It protects the rider from the heat transmitted from the engine and the exhaust system.
More generally, to solve any problem of heat.
Teknofibra Heat shield material is designed to keep any radiant temperature from the engine or exhaust from heating up the fuel in the tank.
Cooler fuel = better performance.
Heat is the enemy when it comes to robbing power.
Its not just only the water temperature that you need to keep cool for optimum performance, Keeping your fuel cool produces the best power and why spend that extra money on race fuel if it is not staying cool.
Ever wonder why teams keep their fuel in fridges or on ice? add it at the last minute? Not to mention when it heats up it expands and it could be the difference of fitting that last 1/8th of a gallon in to finish that race!
These kits come pre cut to fit your model motorcycle , all you need to do is remove any factory heat sheild material clean with a degreaser and install your Teknofibra material , It really is simple.
This material is thinner and lighter than the material that comes from the factory which is a mineral based fiber.
Teknofibra is unlike anything else and will not burn or catch fire, it is non toxic and has proven to keep fuel temps up to 48degrees F cooler than oem material
Technical partner of JIR, Teknofibra® has long been known in the industry and used by prestigious Moto2, World Superbike, CIV and many others teams, for the following applications:
Protection of fairing and belly positioned in close proximity of the exhaust pipes.
Interposed between air box and throttle body allows the aspiration of cold air.
Glued under the tank keeps the lower the fuel temperature.
It maintains a stable temperature of the gas /oil on the nitrogen tank bladder of the dampers installed near the exhaust pipes.
Protects the battery and wiring avoiding problems to the ECU.
Protection of electronic components in hot areas.
Under the saddle and the cowl cover It protects the rider from the heat transmitted from the engine and the exhaust system.
More generally, to solve any problem of heat.
Item #: 0121710635
Condition:
New
Limited Supply: Only 2 Left!
On-hand inventory ships within 24 hours,
Price: $173.25
Heat Shield
Description:
Thermal Heat protection for fuel tanks
Teknofibra Heat shield material is designed to keep any radiant temperature from the engine or exhaust from heating up the fuel in the tank. Cooler fuel = better performance. Heat is the enemy when it comes to robbing power. Its not just only the water temperature that you need to keep cool for optimum performance, Keeping your fuel cool produces the best power and why spend that extra money on race fuel if it is not staying cool. Ever wonder why teams keep their fuel in fridges or on ice? add it at the last minute? Not to mention when it heats up it expands and it could be the difference of fitting that last 1/8th of a gallon in to finish that race! These kits come pre cut to fit your model motorcycle , all you need to do is remove any factory heat sheild material clean with a degreaser and install your Teknofibra material , It really is simple. This material is thinner and lighter than the material that comes from the factory which is a mineral based fiber. Teknofibra is unlike anything else and will not burn or catch fire, it is non toxic and has proven to keep fuel temps up to 48degrees F cooler than oem material Technical partner of JIR, Teknofibra® has long been known in the industry and used by prestigious Moto2, World Superbike, CIV and many others teams, for the following applications: Protection of fairing and belly positioned in close proximity of the exhaust pipes. Interposed between air box and throttle body allows the aspiration of cold air. Glued under the tank keeps the lower the fuel temperature. It maintains a stable temperature of the gas /oil on the nitrogen tank bladder of the dampers installed near the exhaust pipes. Protects the battery and wiring avoiding problems to the ECU. Protection of electronic components in hot areas. Under the saddle and the cowl cover It protects the rider from the heat transmitted from the engine and the exhaust system. More generally, to solve any problem of heat.
Item #: 0121710633
Condition:
New
Limited Supply: Only 7 Left!
On-hand inventory ships within 24 hours,
Price: $173.25
Heat Shield
Description:
Teknofibra Heat shield material is designed to keep any radiant temperature from the engine or exhaust from heating up the fuel in the tank.
Cooler fuel = better performance.
Heat is the enemy when it comes to robbing power.
Its not just only the water temperature that you need to keep cool for optimum performance, Keeping your fuel cool produces the best power and why spend that extra money on race fuel if it is not staying cool.
Ever wonder why teams keep their fuel in fridges or on ice? add it at the last minute? Not to mention when it heats up it expands and it could be the difference of fitting that last 1/8th of a gallon in to finish that race!
These kits come pre cut to fit your model motorcycle , all you need to do is remove any factory heat sheild material clean with a degreaser and install your Teknofibra material , It really is simple.
This material is thinner and lighter than the material that comes from the factory which is a mineral based fiber.
Teknofibra is unlike anything else and will not burn or catch fire, it is non toxic and has proven to keep fuel temps up to 48degrees F cooler than oem material
Technical partner of JIR, Teknofibra® has long been known in the industry and used by prestigious Moto2, World Superbike, CIV and many others teams, for the following applications:
Protection of fairing and belly positioned in close proximity of the exhaust pipes.
Interposed between air box and throttle body allows the aspiration of cold air.
Glued under the tank keeps the lower the fuel temperature.
It maintains a stable temperature of the gas /oil on the nitrogen tank bladder of the dampers installed near the exhaust pipes.
Protects the battery and wiring avoiding problems to the ECU.
Protection of electronic components in hot areas.
Under the saddle and the cowl cover It protects the rider from the heat transmitted from the engine and the exhaust system.
More generally, to solve any problem of heat.
2015-19 20-21 yamaha R1M Yamaha R1 R1M MT-10
Teknofibra Heat shield material is designed to keep any radiant temperature from the engine or exhaust from heating up the fuel in the tank.
Cooler fuel = better performance.
Heat is the enemy when it comes to robbing power.
Its not just only the water temperature that you need to keep cool for optimum performance, Keeping your fuel cool produces the best power and why spend that extra money on race fuel if it is not staying cool.
Ever wonder why teams keep their fuel in fridges or on ice? add it at the last minute? Not to mention when it heats up it expands and it could be the difference of fitting that last 1/8th of a gallon in to finish that race!
These kits come pre cut to fit your model motorcycle , all you need to do is remove any factory heat sheild material clean with a degreaser and install your Teknofibra material , It really is simple.
This material is thinner and lighter than the material that comes from the factory which is a mineral based fiber.
Teknofibra is unlike anything else and will not burn or catch fire, it is non toxic and has proven to keep fuel temps up to 48degrees F cooler than oem material
Technical partner of JIR, Teknofibra® has long been known in the industry and used by prestigious Moto2, World Superbike, CIV and many others teams, for the following applications:
Protection of fairing and belly positioned in close proximity of the exhaust pipes.
Interposed between air box and throttle body allows the aspiration of cold air.
Glued under the tank keeps the lower the fuel temperature.
It maintains a stable temperature of the gas /oil on the nitrogen tank bladder of the dampers installed near the exhaust pipes.
Protects the battery and wiring avoiding problems to the ECU.
Protection of electronic components in hot areas.
Under the saddle and the cowl cover It protects the rider from the heat transmitted from the engine and the exhaust system.
More generally, to solve any problem of heat.
Item #: 400103001
Condition:
New
Limited Supply: Only 5 Left!
On-hand inventory ships within 24 hours, When out of stock Please expect a 2-to-4-week ETA from manufacturer. Please feel free to contact us for any questions.
Price: $173.25
Description:
Teknofibra flexible heat material, this is a sheet 4'x2' 2mm thick. The material is best used with an air gap of 5mm between heat source and panel it is attached too. Can manage temperatures up to 700'C only transfering through 35'C on the reverse of the panel it is mounted to. Adhesive backed able to mount to any clean material and the adhesive glue capable of temperatures up to 250'C.
Item #: US1800000015A
Condition:
New
Limited Supply: Only 3 Left!
On-hand inventory ships within 24 hours, When out of stock Please expect a 2-to-4-week ETA from manufacturer. Please feel free to contact us for any questions.
Price: $119.70
Description:
TeknoFibra Contact sheet dimensions are 0.62m x 0.27m. This is the newest in the range of the Teknofibra brand; Teknofibra contact can be in direct contact with the heat source if required and is able to manage temperatures up to 1000'C only transfering through 54'C on the reverse of the panel it is attached to. Again adhesive backed which is able to manage temperatures up to 250'C (more than the material transmits).
Item #: US1800000007A
Condition:
New
Limited Supply: Only 5 Left!
On-hand inventory ships within 24 hours, When out of stock Please expect a 2-to-4-week ETA from manufacturer. Please feel free to contact us for any questions.
Price: $94.50
Heat Shield, Teknofibra
Description:
Teknofibra flexible heat material, 4foot x 2foot in size 4mm thick.
The material is best used with an air gap of 5mm between heat source and panel it is attached too. Can manage temperatures up to 800'C only transferring through 35'C on the reverse of the panel it is mounted to. Adhesive backed able to mount to any clean material and the adhesive glue capable of temperatures up to 250'C.
The material is best used with an air gap of 5mm between heat source and panel it is attached too. Can manage temperatures up to 800'C only transferring through 35'C on the reverse of the panel it is mounted to. Adhesive backed able to mount to any clean material and the adhesive glue capable of temperatures up to 250'C.
Item #: US1800000017A
Condition:
New
Limited Supply: Only 1 Left!
On-hand inventory ships within 24 hours, When out of stock Please expect a 2-to-4-week ETA from manufacturer. Please feel free to contact us for any questions.
Price: $126.00
Heat Tape
Description:
Teknofibra 1" x 16 ft tape roll to use for joint cover and edge finishing when installing Teknofibra thermal heat shield materials . Manufactured from the same alloy covering as one the teknofibra sheets and applied with the same adhesive as the teknofibra sheets also.
Item #: US1800000009A
Condition:
New
On-hand inventory ships within 24 hours, When out of stock Please expect a 2-to-4-week ETA from manufacturer. Please feel free to contact us for any questions.
Price: $30.00
Description:
Teknofibra 2" x 16ft tape roll to use for joint cover and edge finishing when installing Teknofibra thermal heat shield materials . Manufactured from the same alloy covering as one the teknofibra sheets and applied with the same adhesive as the teknofibra sheets also.
Also available in 1" width.
Also available in 1" width.
Item #: US18000000010A
Condition:
New
On-hand inventory ships within 24 hours, When out of stock Please expect a 2-to-4-week ETA from manufacturer. Please feel free to contact us for any questions.
Price: $40.00
Items 1-14 of 14