HHR Performance - Qnium Brakes
Qnium products undergo a rigorous cycle of design, development, and manufacturing within the Netherlands. Each creation from Qnium signifies a remarkable advancement, showcasing our unwavering commitment to progress. Our primary focus lies in attaining the highest level of excellence for our offerings, as we diligently strive to deliver unparalleled quality through our innovative products.
Browse Qnium Brakes Products
Items 1-5 of 5
Left Hand Brake
Description:
Qnium Radial Rear Left Hand Brake Master Cylinder 12mm
Many riders like to control the rear brake with their left hand. The Left Hand Brake gives riders optimum control over their rear brakes. The material use of the Qnium Radial Left Hand Brake is of sublime quality. Your fingers will give you a lot more feeling by braking than your foot. Qnium’s Left Hand Brake can help when you’re looking for fast lap times on the circuits. The brake feels better with your hand than with your feet. The brake can be operated with very little force. You will experience more control in the braking phase and when turning in the middle of the corner. With this radial left hand brake brake it is also possible to brake, when you steer your bike to the right and having a lean angle. For riders who want to keep the pedal brake as well as the Left Hand Brake, Qnium has also created rear brake master cylinders to compliment this setup, available with an extra banjo connection for a pass through design.
These high quality brake levers can be placed both above and below the lever of the clutch.
Used in Moto2, Moto3, and in other FIM world championships. Top Moto2 riders like Bo Bendsneyder, Thomas Luthi and Marcel Schrotter are using the Qnium Radial Left Hand Brake to get the best out of their races.
Made in Netherlands
Many riders like to control the rear brake with their left hand. The Left Hand Brake gives riders optimum control over their rear brakes. The material use of the Qnium Radial Left Hand Brake is of sublime quality. Your fingers will give you a lot more feeling by braking than your foot. Qnium’s Left Hand Brake can help when you’re looking for fast lap times on the circuits. The brake feels better with your hand than with your feet. The brake can be operated with very little force. You will experience more control in the braking phase and when turning in the middle of the corner. With this radial left hand brake brake it is also possible to brake, when you steer your bike to the right and having a lean angle. For riders who want to keep the pedal brake as well as the Left Hand Brake, Qnium has also created rear brake master cylinders to compliment this setup, available with an extra banjo connection for a pass through design.
These high quality brake levers can be placed both above and below the lever of the clutch.
Used in Moto2, Moto3, and in other FIM world championships. Top Moto2 riders like Bo Bendsneyder, Thomas Luthi and Marcel Schrotter are using the Qnium Radial Left Hand Brake to get the best out of their races.
Made in Netherlands
Item #: 104602
Condition:
New
On-hand inventory ships within 24 hours. No Returns on Clearance items all sales are final
Price: $742.00
crf450, yz450F, yz250, KTM Superduke
Description:
Qnium Rear Brake Master Cylinder 12mm Piston for MX or Supermoto w/ 40mm
*Please make sure to measure your mounting distance (center to center) of your existing rear brake master cylinder for proper fitment before ordering; Also please check and see if it is a integrated push rod version or not. - If you have any questions please feel free to reach out!
-Made to fit with the Qnium Rear Thumb Brake or Qnium Left Hand Brake.
-Threaded mounting points
-40mm Mounting Distance
-Bleed Nipple
-Banjo Connection: Rear foot brake is rear banjo. Rear Thumb Brake / Left Hand Brake connection is Side banjo
-Connection Sensor: M10x1
-12mm Piston
Made In Netherlands
*Please make sure to measure your mounting distance (center to center) of your existing rear brake master cylinder for proper fitment before ordering; Also please check and see if it is a integrated push rod version or not. - If you have any questions please feel free to reach out!
-Made to fit with the Qnium Rear Thumb Brake or Qnium Left Hand Brake.
-Threaded mounting points
-40mm Mounting Distance
-Bleed Nipple
-Banjo Connection: Rear foot brake is rear banjo. Rear Thumb Brake / Left Hand Brake connection is Side banjo
-Connection Sensor: M10x1
-12mm Piston
Made In Netherlands
Item #: 108108
Condition:
New
Limited Supply: Only 1 Left!
On-hand inventory ships within 24 hours. Due to material shortages we have been seeing up to 6 weeks on resupply. We try to keep this product in stock so grab it while we have it. Orders placed will be allocated
to incomming stock.
Price: $300.56
Description:
Qnium Rear Brake Master Cylinder for Sensor 12mm piston w/ 40mm mount 10523SS
*Please make sure to measure your mounting distance (center to center) of your existing rear brake master cylinder for proper fitment before ordering; Also please check and see if it is a integrated push rod version or not. - If you have any questions please feel free to reach out!
Typically seen:
Brembo = 40mm Mounting Distance without integrated pushrod (European bikes)
Nissin = 50mm Mounting Distance with integrated pushrod (Japanese bikes)
-Made to fit with the Qnium Rear Thumb Brake or Qnium Left Hand Brake.
-Brake Sensor Capability
-Bleed Nipple
-Banjo Connection: Rear foot brake is rear banjo. Rear Thumb Brake / Left Hand Brake connection is Side banjo
-Connection Sensor: M10x1
-40mm Mounting Distance
-12mm Piston
-Available with our without threaded push rod, please verify your type of existing rear master cylinder before purchasing. If you have any questions please feel free to reach out!
The Rear Master Cylinder Sensor version is chosen by many riders, because you can measure your brake data with the sensor. Perfect for optimizing your performances on the track! This high quality rear brake master cylinder has been specially developed for people who want to keep the rear foot brake in addition to the Qnium thumb Brake or Left Hand brake. These rear brake master cylinder comes with an extra banjo connection for the Qnium thumb brake or Left Hand brake.
Used in Moto2, Moto3, and in other FIM world championships
Made In Netherlands
*Please make sure to measure your mounting distance (center to center) of your existing rear brake master cylinder for proper fitment before ordering; Also please check and see if it is a integrated push rod version or not. - If you have any questions please feel free to reach out!
Typically seen:
Brembo = 40mm Mounting Distance without integrated pushrod (European bikes)
Nissin = 50mm Mounting Distance with integrated pushrod (Japanese bikes)
-Made to fit with the Qnium Rear Thumb Brake or Qnium Left Hand Brake.
-Brake Sensor Capability
-Bleed Nipple
-Banjo Connection: Rear foot brake is rear banjo. Rear Thumb Brake / Left Hand Brake connection is Side banjo
-Connection Sensor: M10x1
-40mm Mounting Distance
-12mm Piston
-Available with our without threaded push rod, please verify your type of existing rear master cylinder before purchasing. If you have any questions please feel free to reach out!
The Rear Master Cylinder Sensor version is chosen by many riders, because you can measure your brake data with the sensor. Perfect for optimizing your performances on the track! This high quality rear brake master cylinder has been specially developed for people who want to keep the rear foot brake in addition to the Qnium thumb Brake or Left Hand brake. These rear brake master cylinder comes with an extra banjo connection for the Qnium thumb brake or Left Hand brake.
Used in Moto2, Moto3, and in other FIM world championships
Made In Netherlands
Item #: 1052000
Condition:
New
Limited Supply: Only 2 Left!
On-hand inventory ships within 24 hours. Due to material shortages we have been seeing up to 6 weeks on resupply. We try to keep this product in stock so grab it while we have it. Orders placed will be allocated
to incomming stock.
Price: $431.68
Description:
Qnium Rear Brake Master Cylinder Top Side 12mm piston w/ 40mm mount 1052300
*Please make sure to measure your mounting distance (center to center) of your existing rear brake master cylinder for proper fitment before ordering; Also please check and see if it is a integrated push rod version or not. - If you have any questions please feel free to reach out!
Typically seen:
Brembo = 40mm Mounting Distance without integrated pushrod (European bikes)
Nissin = 50mm Mounting Distance with integrated pushrod (Japanese bikes)
-Made to fit with the Qnium Rear Thumb Brake or Qnium Left Hand Brake.
-Banjo Connection: Rear foot brake is top banjo. Rear Thumb Brake / Left Hand Brake connection is Side banjo
-Banjo Type: M10x1
-40mm Mounting Distance
-12mm Piston
-Available with our without threaded push rod, please verify your type of existing rear master cylinder before purchasing. If you have any questions please feel free to reach out!
This high quality rear brake master cylinder has been specially developed for people who want to keep the rear foot brake in addition to the Qnium thumb Brake or Left Hand brake. These rear brake master cylinder comes with an extra banjo connection for the Qnium thumb brake or Left Hand brake. Of course the Qnium Rear thumb brake or Left Hand brake can also be mounted directly on the rear brake caliper without a rear brake master cylinder.
Used in Moto2, Moto3, and in other FIM world championships
Made In Netherlands
*Please make sure to measure your mounting distance (center to center) of your existing rear brake master cylinder for proper fitment before ordering; Also please check and see if it is a integrated push rod version or not. - If you have any questions please feel free to reach out!
Typically seen:
Brembo = 40mm Mounting Distance without integrated pushrod (European bikes)
Nissin = 50mm Mounting Distance with integrated pushrod (Japanese bikes)
-Made to fit with the Qnium Rear Thumb Brake or Qnium Left Hand Brake.
-Banjo Connection: Rear foot brake is top banjo. Rear Thumb Brake / Left Hand Brake connection is Side banjo
-Banjo Type: M10x1
-40mm Mounting Distance
-12mm Piston
-Available with our without threaded push rod, please verify your type of existing rear master cylinder before purchasing. If you have any questions please feel free to reach out!
This high quality rear brake master cylinder has been specially developed for people who want to keep the rear foot brake in addition to the Qnium thumb Brake or Left Hand brake. These rear brake master cylinder comes with an extra banjo connection for the Qnium thumb brake or Left Hand brake. Of course the Qnium Rear thumb brake or Left Hand brake can also be mounted directly on the rear brake caliper without a rear brake master cylinder.
Used in Moto2, Moto3, and in other FIM world championships
Made In Netherlands
Item #: 1052300
Condition:
New
On-hand inventory ships within 24 hours. Due to material shortages we have been seeing up to 6 weeks on resupply. We try to keep this product in stock so grab it while we have it. Orders placed will be allocated
to incomming stock.
Price: $431.00
Description:
Qnium Rear Brake Master Cylinder Top Side 12mm piston w/ 50mm mount + Push Rod 105077
*Please make sure to measure your mounting distance (center to center) of your existing rear brake master cylinder for proper fitment before ordering; Also please check and see if it is a integrated push rod version or not. - If you have any questions please feel free to reach out!
Typically seen:
Brembo = 40mm Mounting Distance without integrated pushrod (European bikes)
Nissin = 50mm Mounting Distance with integrated pushrod (Japanese bikes)
-Made to fit with the Qnium Rear Thumb Brake or Qnium Left Hand Brake.
-Banjo Connection: Rear foot brake is Top banjo. Rear Thumb Brake / Left Hand Brake connection is Side banjo
-Banjo Type: M10x1
-50mm Mounting Distance
-12mm Piston
-Comes with integrated pushrod
This high quality rear brake master cylinder has been specially developed for people who want to keep the rear foot brake in addition to the Qnium thumb Brake or Left Hand brake. These rear brake master cylinder comes with an extra banjo connection for the Qnium thumb brake or Left Hand brake. Of course the Qnium Rear thumb brake or Left Hand brake can also be mounted directly on the rear brake caliper without a rear brake master cylinder.
Used in Moto2, Moto3, and in other FIM world championships
Made In Netherlands
*Please make sure to measure your mounting distance (center to center) of your existing rear brake master cylinder for proper fitment before ordering; Also please check and see if it is a integrated push rod version or not. - If you have any questions please feel free to reach out!
Typically seen:
Brembo = 40mm Mounting Distance without integrated pushrod (European bikes)
Nissin = 50mm Mounting Distance with integrated pushrod (Japanese bikes)
-Made to fit with the Qnium Rear Thumb Brake or Qnium Left Hand Brake.
-Banjo Connection: Rear foot brake is Top banjo. Rear Thumb Brake / Left Hand Brake connection is Side banjo
-Banjo Type: M10x1
-50mm Mounting Distance
-12mm Piston
-Comes with integrated pushrod
This high quality rear brake master cylinder has been specially developed for people who want to keep the rear foot brake in addition to the Qnium thumb Brake or Left Hand brake. These rear brake master cylinder comes with an extra banjo connection for the Qnium thumb brake or Left Hand brake. Of course the Qnium Rear thumb brake or Left Hand brake can also be mounted directly on the rear brake caliper without a rear brake master cylinder.
Used in Moto2, Moto3, and in other FIM world championships
Made In Netherlands
Item #: 105077
Condition:
New
Limited Supply: Only 1 Left!
On-hand inventory ships within 24 hours. Due to material shortages we have been seeing up to 6 weeks on resupply. We try to keep this product in stock so grab it while we have it. Orders placed will be allocated
to incomming stock.
Price: $431.68
Items 1-5 of 5