Description: AiM SOLO 2 DL Aprilia RSV4 / Tuono V4 ECU interface harness Aprilia RS 660

For these Aprilia models:

RSV4 RR/RF from 2017

RSV4 1100 from 2019

Tuono V4 RR/Factory from 2017

Description: AiM SOLO 2 DL Aprilia RSV4 / Tuono Bracket Mounting Kit X46KSARSV40

For these Aprilia models:

RSV4 RR/RF from 2017

RSV4 1100 from 2019

Tuono V4 RR/Factory from 2017

Description: Rotobox BOOST Symmetric Rear Wheel

The new and improved model BOOST carbon fiber wheel from Rotobox, decreasing the weight from the RBX2 with improved design and higher performance! Comes in gloss and matte finish, in both symmetric and convex designs.

Like the RBX2, the BOOST is produced using Rotobox's unique 3-component composite - combining carbon, epoxy and stainless steel. By integrating the stainless 2,5 mm steel wire in each side of the rim, we increase its impact resistance at the most critical outer part. JWL and DOT approved, having met JASO T203-85 safety standards.

Another hidden BOOST gem - the Structural Rib. Thanks to the High Pressure Core Technology the structural rib is placed in the inner side between the spokes, with its mission to support the stress hot spot of the wheel. As a result the BOOST elegant spoke design brings greater stiffness and although the spokes are thinner the BOOST is stronger than ever - with a permissible static load of 280 kg on the rear and 180kg on the front wheel.

ASSEMBLING COMPONENTS
Carbon fiber composite rim, a one-piece hollow carbon cast, reinforced with stainless steel wire and UV protected; 7075 T6 aluminum alloy hubs, spacers and sprocket carrier [only with rear symmetric wheel]. machined from solid and hard anodized; polyurethane cushion drive set; SKF bearings; aluminum valve stem.

PRODUCT QUALITY CONTROL
Your Rotobox wheel has its own Serial Number to track the production history. We confirm to have performed quality verification procedure of your Rotobox wheel.

SIZE
17" x 6.00"

WEIGHT
REAR WHEEL WEIGHT 4.11 kg / 9.06 LBS

MAX. STATIC LOAD
REAR 280 kg / 617 LBS

MAX. OPERATING TEMPERATURE
100 C / 212 F

MAX. PRESSURE
4 BAR / 58 PSI

The wheels conform to safety standard JASO T203-85 for JWL dotE Certification. Before riding on public streets, be sure to check your local regulations.
Rotobox Boost Wheel set Weight example:
Stock S1000RR 11.70kg (25.79 lbs)
Rotobox Boost 6.69kg (14.74 lbs)
Weight saving more than 5.00kg of rotating mass. Incredible!

Description:

Description: Parts Included In Complete Race Fairing:
Upper Race Fairing (6 Dzus)
Lower Fairing
Left Side Panel (2 Dzus)
Right Side Panel (2 Dzus)
Single Race Seat (2 Pcs) There are 3 options for seats
• Basic - This seat is a 15mm neoprene foam glued to a base that is molded from the seat pan of the tail section and then attaches to the seat pan with bolts. Please not that these seat's will only fit carbonin seat pans and seat units. It will not work on any other brand. This foam will wear out like any other foam pad.
• Standard - This is an upgrade to the basic seat which is covered in a neoprene material that protects the basic foam and provides the rider a level of grip but without compromising the need to slide side to side. It looks much more professional and will protect the basic foam from any wear from patches on leather suits or abuse from side to side movements. we have seen these seats go on for 3 seasons or more!
• Pro Seat - This seat is for riders or teams that require their seat to provide back support or a step seat to keep them in a position from sliding too far back in the seat under acceleration, this is often done with a raised section so they can still get back in the seat in the full tuck, they are just raised up more which helps keep the butt up and their head shoulders and chest lower in the tuck. It is the same material as the standard seat but can also be customized with team logo's or race number -If you purchase a pro seat we will contact you to design your seat. Please note pro seats are made custom to order

Description: Aluminum rearsets Aprilia RSV4 RF - Tuono V4 (street and race) 17-23 A005S & A005SR

Description: APEX RACING DEVELOPMENT TWO BUTTON ENGINE RACE SWITCH FOR APRILIA RSV4, TUONO (ALL YEARS)
TBERSFA-RSV4

Description: APEX RACING DEVELOPMENT TWO BUTTON ENGINE RACE SWITCH FOR APRILIA RSV4, TUONO (ALL YEARS) (BREMBO MOUNT INLINE)
TBERSFA-RSV4-BMI


- The switch is a direct plug and play replacement for OEM ignition switch for all Aprilia RSV4 and Tuono models (all years 2004-2018)
- Ideal for racing and street application, to save space and weight where it matters. This model takes weight savings to another level - only 40 grams!!! Switch is acting as a back mounting bracket for your front brake master cylinder.
- Fits OEM and Brembo RCS master cylinders. Note!!! - Inline fasteners bore.
- Designed for 22 mm standard clip on handle bars.
- Switch functions: engine run/stop (maintained red) and starter activation (momentary black.
- Designed and CNC machined in United States from aircraft grade aluminum to be the smallest and lightest on the market.
- Premium, military grade buttons with gold plated contact surfaces, manufactured in United States by Otto.
- Switch functions: engine run/stop (maintained red) and starter activation (momentary black.
- Plug and play with OEM connector.

Description: ATTACK PERFORMANCE BRAKE LEVER GUARD KIT, AERO HARD 901132G
MADE IN USA To Fit with Attack Clipon Tubes Please Note these DO not fit with all aftermarket clipons At Attack Performance they have set up many championship winning chassis along with designing, manufacturing, and building our own MotoGP machine with their own parts. Attack Performance utilizes chassis simulation software to find critical dimensions such as Rake, Trail, Wheel Forces, and Linkage Ratios, just to name a few. Those tools combined with their decades of racing eliminates the guesswork from chassis setup.

Description: ATTACK PERFORMANCE BRAKE LEVER GUARD KIT, BLACK 901132B
MADE IN USA To Fit with Attack Clipon Tubes Please Note these DO not fit with all aftermarket clipons At Attack Performance they have set up many championship winning chassis along with designing, manufacturing, and building our own MotoGP machine with their own parts. Attack Performance utilizes chassis simulation software to find critical dimensions such as Rake, Trail, Wheel Forces, and Linkage Ratios, just to name a few. Those tools combined with their decades of racing eliminates the guesswork from chassis setup.

Description: ATTACK PERFORMANCE HANDLE BAR KIT, 51MM, BLACK (REPLACEMENT PARTS) 901108.51BE
MADE IN USA At Attack Performance they have set up many championship winning chassis along with designing, manufacturing, and building our own MotoGP machine with their own parts. Attack Performance utilizes chassis simulation software to find critical dimensions such as Rake, Trail, Wheel Forces, and Linkage Ratios, just to name a few. Those tools combined with their decades of racing eliminates the guesswork from chassis setup.

Description: ATTACK PERFORMANCE REAR SET KIT, APRILIA RSV4 17- , TUONO 17- , BLACK 712110B
MADE IN USA At Attack Performance they have set up many championship winning chassis along with designing, manufacturing, and building our own MotoGP machine with their own parts. Attack Performance utilizes chassis simulation software to find critical dimensions such as Rake, Trail, Wheel Forces, and Linkage Ratios, just to name a few. Those tools combined with their decades of racing eliminates the guesswork from chassis setup.

Description: ATTACK PERFORMANCE REAR SET KIT, APRILIA RSV4 17- , TUONO 17- , CLEAR 712110S
MADE IN USA At Attack Performance they have set up many championship winning chassis along with designing, manufacturing, and building our own MotoGP machine with their own parts. Attack Performance utilizes chassis simulation software to find critical dimensions such as Rake, Trail, Wheel Forces, and Linkage Ratios, just to name a few. Those tools combined with their decades of racing eliminates the guesswork from chassis setup.

Description: Bonamici Racing Aluminium Dashboard Protection Aprilia RSV4 / Tuono V4 2017 - 2020 DCP06

Worried about potential damage happening to your beautiful Aprilia instrument cluster? Look no further as Bonamici has released this specifically designed for the latest RSV4 or Tuono V4 to help protect your dashboard from anything unwanted touching the expensive TFT Dash, leading to potential damage. Manufactured from Billet Aluminium which is suitable for absorbing shocks while featuring a plexi-glass protective panel which is treated to an anti-fog finish to ensure your tachometer is visible in all conditions.

Description: Bonamici Racing Aluminium Handlebars Diameter 51 mm lifted Aprilia RSV4 2021 | RS 660 SM51A

Bonamici Racing realizes for the major sports bikes, handlebasr that allow a sporty driving at the highest levels and a perfect feeling in all conditions.
Two version: raised 15mm and not raised, both with inclination of 6.5° degrees.
Each element of the Bonamici Racing handlebars is made from solid billet aluminium machined with cnc technology.

Description: Bonamici Racing Aluminium Handlebars Diameter 51 mm unlifted SM51B

Bonamici Racing realizes for the major sports bikes, handlebasr that allow a sporty driving at the highest levels and a perfect feeling in all conditions.
Two version: raised 15mm and not raised, both with inclination of 6.5° degrees.
Each element of the Bonamici Racing handlebars is made from solid billet aluminium machined with cnc technology.

Description: Aluminum lever kit Aprilia RSV4, Factory, APRC, Tuono 1100, RS 660, Tuono 660 KL010

Description: Bonamici Racing Fuel Tank Cap Aprilia RSV4 / Tuono V4 / RSV 1000 / RSV4 Factory 2004 - 2020 FC030

This Fuel Cap has been designed by Bonamici to directly replace the OEM Fuel Cap component on the Aprilia RSV4 or Tuono V4, allowing you to have faster fueling times, drastically helping in something like a pit lane environment. This Fuel Tank Cap kit is perfect for either a Trackday Warrior or even your Fair Weather Rider! Manufactured from Billet Aluminium and treated to an anodized surface finish, you can rest assured that this Fuel Tank Cap Kit will withstand the harshest of conditions while looking amazing at the same time!

Description: Bonamici Racing Glass Spare Part Aprilia RSV4 | Tuono V4 SP_DCP06

Replacement glass for instrumentation protection in in high transparency plexiglass.
Designed to prevent damages caused by falls, it‘s provided by a PMMA protective screen with anti-fog ventilation that also protects display from accidental impacts of objects such as stones.

Description: * Pricing is per caliper, dual disc applications must order two
NOTE: We recommend replacing piston seals when installing the ventilated Caliper Racing Pistons
For Brembo GP4-MS Calipers Called Stylema which can be found on some oem models including Kawasaki H2 and Aprilia RSV4 however please check with us before purchase if you are unsure

Description: 17RCS CORSA CORTA RR – Race Replica Radial master cylinder Suited for Bikes that come with Brembo Calipers or 34mm pistons
Many new features have been introduced for this new radial brake master cylinder, the closest to those used in top motorbike racing. Machined from billet, like the master cylinder used in MotoGP and SBK, the design of the new Brembo 17RCS CORSA CORTA RR has been modified to make it lighter and even more similar to the racing versions. The hard oxidized finish, in titanium grey, ensures outstanding wear resistance and extremely low friction between moving parts. It comes in a darker color than the previous version, precisely because of the type of treatment, making it even more similar to the versions used in Moto2 and Moto3.

Description: Listing is for 2 pad, which is 1 caliper worth
Z04 dedicated racing compound
Pads are 7.9 mm thick total
Replacement from part number 107A48649
*for Brembo M4 M50 GP4RS GP4RX and .484 Cafe Calipers

Description:

Floating, Gold Carrier, Aprilia

Supersport discs, developed to provide the highest possible performance on the road and on the track, are available with a rotor measuring 34 mm in width and oversized to 5.5 mm in thickness, fully interchangeable with the original components without any modifications. These are fully floating discs consisting of a rotor in thermally treated steel (capable of resisting extreme thermo-mechanical stress) and a housing machined from billet aluminium alloy.
In combination with Brembo Z04 brake pads these discs have won numerous SuperSport Championships, including the 2012, 2011 and 2009 editions. The complete range of Brembo SuperSport discs can also boast the approval of the renowned TUV Certification Body which means they can be used on public roads in all countries that recognise this certification.
The Supersport discs are available both with the same diameter as the original discs, to which they are totally interchangeable, as well as with greater diameter, for which the appropriate spacers must be purchased separately. For more information please contact your local dealer.

Description: Rsv4/RF front fender for racing

Description: Replacement Lower fairing

Description: Replacement Right side panel

Description: Replacement Upper fairing

Description: Carbonin Carbon Fiber Air Box Inlet Tubes 2009-2020 Aprilia RSV4

Description: Carbon Fiber Clutch Cover Installed With Silicon (Not Supplied)

Description: Replacement Left side Fairing For Carbonin complete fairing, will not fit with other brands includes 2Dzus fasteners

Description: Carbon fiber rear fender oem replacement

Description: Replacement Right side Fairing For Carbonin complete fairing, will not fit with other brands Dzus included

Description: Replacement Upper Fairing For Carbonin complete fairing, will not fit with other brands

Description: Lightweight Carbon fender Oem Replacement

Description: RSV4 seat for Carbonin bodywork
Pictures are shown for reference only and may not accurately represent the exact model of your seat

Description: Cordona GP ASG Superbike Quickshifter-Blipper, Aprilia RSV4/Tuono V4 421Spec

The new developed GP ASG Superbike sensor is a direct plug & play OEM replacement quickshifter/blipper (or **only quickshifter) for modern Superbikes and Streetbikes with an analogue 0-5v interface to the ECU.

The GP ASG Superbike sensor greatly improves the gear change performance and gives a superior distinct and smooth gear change feeling similar to top GP and WSBK systems.

The Strain Gauge technology is far more reliable than spring loaded OEM shifters and is fully weather protected.
The GP ASG Superbike is easily configurable for push or pull gear linkage (street or race gear shift).

The GP ASG Superbike 421std are AQS replacement for Aprilia RSV4, Tuono V4,DQS . See Bike List for specific model-year.

**For bikes with 0-5V interface and only quickshifter (up shift), like many Mv Agusta's, the GP ASG Superbike works fine only for up shift. If the ECU will be upgraded (flashed) with blip the GP ASG Superbike supports also down shift without problem.

>>The 421Speciale version is 100% plug & play mounted with uniballs and bike specific rod lengths.<<

Description: D.I.D ER Series Exclusive 520 ERV7 Racing Chain 120 Link
520ERV7120ZB

-Premium Road Racing Chain
-Features gold color plates
-Tensile strength: 8,800 lbs.

Description: Extreme Components Brake calipers heatsink for Aprilia RSV4/RF (2009/2020) - BPR01G
-Made In Italy
-Research and development takes place exclusively through collaboration with the best race teams engaged for years in the most prestigious national and world competitions; And only after specific tests, does Extreme Components start the production.

Description: Extreme Components Brake side monolithic plate for Aprilia RSV4/RF/1100 Factory, Tuono V4/Factory (2009/2020) - PED-GP EVO MON DX RSV4

-Made In Italy
-Research and development takes place exclusively through collaboration with the best race teams engaged for years in the most prestigious national and world competitions; And only after specific tests, does Extreme Components start the production.

Description: Extreme Components Swingarm protection for Aprilia RSV4 / RF (2009/2020) - CA1755

-Made In Italy
-Research and development takes place exclusively through collaboration with the best race teams engaged for years in the most prestigious national and world competitions; And only after specific tests, does Extreme Components start the production.