HHR Performance - Product Search
Browse Products
We now sell a kit to include the upper fairing lower fairing and side panels with all of the necessary bracketry for you to purchase to be able to turn your road bike into a track weapon and still be street legal!
This lets you retain your oem seat, tail and airbox cover.
Parts Included with Avio Fiber Kit:
-Upper race faring With Headlights Cut Out including Brackets for Carbonin fairing bracket for headlight mounting and installed quick release fasteners (DZUS)
-Lower fairing with side stand cut out for use with your kickstand
-Left side panel
-Right side panel
-CNC brackets
-Dzus fasteners
Please Note OEM air intake will need to be modified to fit race bodywork. It is recommended to use the racing fairing bracket and air intake tube However you can trim your oem air intake tube to remove the inner trim plastic from the oem fairing
Carbonin Will be closed during the dates of July 27th through August 19th for Summer Vacation. Please note that no products can be produced during this time and that any orders placed will resume production times as of the 19th of August.
upper race faring (6 Dzus)
lower fairing (4 Dzus)
left side panel right side panel
single race seat/Tail unit(2 pcs)
Airbox Cover With side panels Required to install- Bracket kit for Installation (must be purchased separately) IN403B
There are 2 types of Rear Bracket kits- oem and SBK subframe
There are 3 options for seats
Please Note OEM air intake will need to be modified to fit race bodywork. It is recommended to use the racing fairing bracket and air intake tube
Carbonin Will be closed during the dates of July 27th through August 19th for Summer Vacation. Please note that no products can be produced during this time and that any orders placed will resume production times as of the 19th of August.
-Will not fit other brands of bodywork
-Created with BSB Team Honda Racing UK
-Dzus are pre-installed, riveted
-Fairings are pre-fitted
-White Gel Coat ready for Prep & Paint
-Avio Fiber fairings are Reinforced with Carbon Fiber along all trim and edging.
Race Bodywork includes:
Upper Race Fairing (4 dzus)
Lower Fairing (4 dzus)
Left Side Panel (2 dzus)
Left Side Panel Wing Cover
Left Side Panel Inner Wing
Right Side Panel (2 dzus)
Right Side Panel Wing Cover
Right Side Panel inner Wing
Tail Unit (2 pcs)
Airbox Cover w/ Side Panels
Brackets Required, but not included with bodywork:
Aluminum Inserts for Tail Unit (4 pcs) ALU2002H
Inox Bracket for Lower Fairing (1 pc) IN2002H
Inox Brackets for Airbox Cover w/ Side Panels (2 pcs) IN2001H
Front fender is optional and not included with Race bodywork.
Carbonin Will be closed during the dates of July 27th through August 19th for Summer Vacation. Please note that no products can be produced during this time and that any orders placed will resume production times as of the 19th of August.
Upper (4 Dzus)
Lower
Left side panel (7 Dzus)
Cover left side Panel
Right side panel (7 Dzus)
Cover right side panel
Single race tail unit (includes battery tray, seat support and winglets)
Does not come painted* Photo for kit reference only
Carbonin Will be closed during the dates of July 27th through August 19th for Summer Vacation. Please note that no products can be produced during this time and that any orders placed will resume production times as of the 19th of August.
• upper race fairing (6 Dzus)
• lower fairing
• left side panel 2Dzus
• right side panel 3 Dzus
• single Tail unit (4pcs) Superbike style, OEM seat can not be used
Required Parts
• Stainless steel Seat Unit bracket with dzus *Required to install tail section IN1801Y
• Stainless steel Lower left bracket with dzus **Only required if stock bracket is not present IN1802Y
Not Included
• Fenders
• Airbox Cover
• Seat Unit
Carbonin Will be closed during the dates of July 27th through August 19th for Summer Vacation. Please note that no products can be produced during this time and that any orders placed will resume production times as of the 19th of August.
• Upper Race Fairing (6 Dzus)
• Lower Fairing (Oem Radiator; 6 Dzus)
• Left Side Panel (Oem Radiator)
• Right Side Panel (Oem Radiator)
• Single Race Seat (3 Pcs)
Please Note that this Kit has been designed to be used with the REQUIRED bracket kit so the fairing can be mounted to the bike with Dzus fasteners:
Complete aluminum fairing bracket kit (4 pcs with 3 Dzus) ALU3113B
Carbonin Will be closed during the dates of July 27th through August 19th for Summer Vacation. Please note that no products can be produced during this time and that any orders placed will resume production times as of the 19th of August.
• Upper Race Fairing (6 Dzus)
• Lower Fairing
• Left Side Panel (3 Dzus)
• Right Side Panel (3 Dzus)
• Single Race Tail (4 Pcs)
Not included but required:
IN1901Y Seat Bracket
*Cannot use theOEM Seat with this tail
Carbonin Will be closed during the dates of July 27th through August 19th for Summer Vacation. Please note that no products can be produced during this time and that any orders placed will resume production times as of the 19th of August.
• Upper Race Fairing (6 Dzus)
• Lower Fairing designed for H20 Oversized radiator
• Left Side Panel (3 Dzus) designed for H20 Oversized radiator
• Right Side Panel (3 Dzus) designed for H20 Oversized radiator
• Single Race Tail (4 Pcs)
Carbonin Will be closed during the dates of July 27th through August 19th for Summer Vacation. Please note that no products can be produced during this time and that any orders placed will resume production times as of the 19th of August.
• Lower Fairing
• Left Side Panel (3 Dzus)
• Right Side Panel (3 Dzus)
• Single Race Seat (2 Pcs)
•
Carbonin Will be closed during the dates of July 27th through August 19th for Summer Vacation. Please note that no products can be produced during this time and that any orders placed will resume production times as of the 19th of August.
• Upper Race Fairing (6 Dzus)
• Lower Fairing (5 Dzus)
• Left Side Panel
• Right Side Panel
• SSP Single Race Seat (4 Pcs; 3 Dzus)Uses a seat support and seat base for a firm Support but with the ability to get to the battery tray.
Carbonin Will be closed during the dates of July 27th through August 19th for Summer Vacation. Please note that no products can be produced during this time and that any orders placed will resume production times as of the 19th of August.
• Upper Race Fairing (6 Dzus)
• Lower Fairing (5 Dzus)
• Left Side Panel
• Right Side Panel
• Single Race Seat With Fuel Tank Panels (4 Pcs; 1 Dzus)
The 2017-2021 GSXR1000 Bodywork requires the following bracketry for fitment:
Aluminum CNC Inserts Side Panels (ALU1202S)
Inox Holders for Lower Fairing (IN1202S)
The The 2017-2021 GSXR1000 Bodywork also will require 1 of the 2 following tail unit inserts:
Aluminum CNC Tail Inserts Quick Release (Quick Release Bracket w/ DZUS) (ALU1204SCNC)
Aluminum CNC Tail Inserts Bolt On (Hard Mount w/ Bolt) (ALU1204SR)
There are 3 seat options available.
Basic - This seat is a 15mm neoprene foam glued to a base that is molded from the seat pan of the tail section and then attaches to the seat pan with bolts. Please not that these seat's will only fit Carbonin seat pans and seat units. It will not work on any other brand. This foam will wear out like any other foam pad.
Standard - This is an upgrade to the basic seat which is covered in a neoprene material that protects the basic foam and provides the rider a level of grip but without compromising the need to slide side to side. It looks much more professional and will protect the basic foam from any wear from patches on leather suits or abuse from side to side movements. we have seen these seats go on for 3 seasons or more!
Pro Seat - This seat is for riders or teams that require their seat to provide back support or a step seat to keep them in a position from sliding too far back in the seat under acceleration, this is often done with a raised section so they can still get back in the seat in the full tuck, they are just raised up more which helps keep the butt up and their head shoulders and chest lower in the tuck. It is the same material as the standard seat but can also be customized with team logo's or race number -If you purchase a pro seat we will contact you to design your seat. Please note pro seats are made custom to order
Carbonin Tail unit will not work with OEM Seat.
Carbonin Will be closed during the dates of July 27th through August 19th for Summer Vacation. Please note that no products can be produced during this time and that any orders placed will resume production times as of the 19th of August.
Complete Fairing Kit Includes
• Upper fairing 8 dzus
• Lower Fairing
• Left side panel 3 Dzus
• Right side panel 3 Dzus
• Single race seat 2 pcs
*Bracket IN1901K required for the tail unit
Carbonin Will be closed during the dates of July 27th through August 19th for Summer Vacation. Please note that no products can be produced during this time and that any orders placed will resume production times as of the 19th of August.
Parts Included In Complete Race Fairing Version 2:
• Upper Race Fairing (6 Dzus)
• Lower Fairing (Big Radiator; 6 Dzus)
• Left Side Panel (Big Radiator)
• Right Side Panel (Big Radiator)
• Single Race Seat (3 Pcs)
Please Note that this Kit requires complete bracket kit for fitment, Carbonin Bodywork Complete Bracket Kit 2015-2019 BMW S1000RR (ALU3113B)
Carbonin Will be closed during the dates of July 27th through August 19th for Summer Vacation. Please note that no products can be produced during this time and that any orders placed will resume production times as of the 19th of August.
• Lower Fairing (4 Dzus)
• Left Side Panel
• Right Side Panel
• Single Race Seat (2 Pcs)
• Fuel Tank Cover (Oem; 4 Dzus]
Additional parts needed
Part needed to fit complete race fairing:
• aluminium inserts for seat unit (4 pcs)
*To Fit Seat Pan Brackets are Required
Carbonin Will be closed during the dates of July 27th through August 19th for Summer Vacation. Please note that no products can be produced during this time and that any orders placed will resume production times as of the 19th of August.
upper race faring (6 Dzus)
lower fairing (4 Dzus)
left side panel right side panel
single race seat/Tail unit(2 pcs)
Airbox Cover With side panels Required to install- Bracket kit for Installation (must be purchased separately) IN403B
There are 2 types of Rear Bracket kits- oem and SBK subframe
Optional Not Included -There are 3 options for seats
Basic - This seat is a 15mm neoprene foam glued to a base that is molded from the seat pan of the tail section and then attaches to the seat pan with bolts. Please not that these seat's will only fit carbonin seat pans and seat units. It will not work on any other brand. This foam will wear out like any other foam pad.
Standard - This is an upgrade to the basic seat which is covered in a neoprene material that protects the basic foam and provides the rider a level of grip but without compromising the need to slide side to side. It looks much more professional and will protect the basic foam from any wear from patches on leather suits or abuse from side to side movements. we have seen these seats go on for 3 seasons or more!
Pro Seat - This seat is for riders or teams that require their seat to provide back support or a step seat to keep them in a position from sliding too far back in the seat under acceleration, this is often done with a raised section so they can still get back in the seat in the full tuck, they are just raised up more which helps keep the butt up and their head shoulders and chest lower in the tuck. It is the same material as the standard seat but can also be customized with team logo's or race number -If you purchase a pro seat we will contact you to design your seat. Please note pro seats are made custom to order
Carbonin Will be closed during the dates of July 27th through August 19th for Summer Vacation. Please note that no products can be produced during this time and that any orders placed will resume production times as of the 19th of August.
• upper race faring (4 Dzus)
• lower fairing
• left side panel with optional ecu or rectifier housing. ecu for oem placement or Race for the YEC harness which houses the regulator rectifier
• right side panel
• single race seat (3 pcs) Standard seat can be used but you need to modify the battery retention plate
*Optional Airbox Cover w/ Integrated side panels show in picture above Not included Y16425AF
Carbonin Will be closed during the dates of July 27th through August 19th for Summer Vacation. Please note that no products can be produced during this time and that any orders placed will resume production times as of the 19th of August.
We now sell a kit to include the upper fairing lower fairing and side panels with all of the necessary bracketry for you to purchase to be able to turn your road bike into a track weapon and still be street legal!
This lets you retain your oem seat, tail and airbox cover.
Parts Included with Carbon Fiber Kit:
-Upper race faring With Headlights Cut Out including Brackets for Carbonin fairing bracket for headlight mounting and installed quick release fasteners (DZUS)
-Lower fairing with side stand cut out for use with your kickstand
-Left side panel
-Right side panel
-CNC brackets
-Dzus fasteners
Please Note OEM air intake will need to be modified to fit with this bodywork. It is recommended to use the racing fairing bracket and air intake tube However you can trim your oem air intake tube to remove the inner trim plastic from the oem fairing
Carbonin Will be closed during the dates of July 27th through August 19th for Summer Vacation. Please note that no products can be produced during this time and that any orders placed will resume production times as of the 19th of August.
Upper Race Faring (6 Dzus) fits oem screen
Lower Fairing
Left Side Panel (2 Dzus)
Right Side Panel (4 Dzus)
Single Race Seat (2 Pcs) Seat support and Superbike tail which provides a much better riding position for the racers ergonomics
Tank Cover (Oem)
This kit utilizes the oem trim panels for the inner leg area , there are provisions for these to attach to the upper fairing and side panels
Carbonin Will be closed during the dates of July 27th through August 19th for Summer Vacation. Please note that no products can be produced during this time and that any orders placed will resume production times as of the 19th of August.
Or you can use the OEM 09-12 version.
• Parts Included In Complete Race Fairing
• Upper Race Fairing (4 Dzus)
• Lower Fairing
• Superbike seat unit
Please note that oem lower tank trim panels are used with this bodywork. Upgrade to Carbon fiber panels is optional CK15450
This is the ZX6R fairing which is the shape that is used in World Supersport and is not the ZX636 kit often found in the United States. (Carbonin DO Not make a 636 Kit)
This kit will fit on a ZX636 but you Must change the front air intake for the ZX6R intake and bracket as they are a different shape.
The superbike tail with fit with the ZX636 however the oem undertray will need to be trimmed to fit beneath it.
Carbonin Will be closed during the dates of July 27th through August 19th for Summer Vacation. Please note that no products can be produced during this time and that any orders placed will resume production times as of the 19th of August.
Parts Included In Complete Race Fairing:
• Upper Race Fairing (6 Dzus)
• Lower Fairing
• Left Side Panel (2 Dzus)
• Right Side Panel (2 Dzus)
• Single Race Seat (2 Pcs)
Carbonin Will be closed during the dates of July 27th through August 19th for Summer Vacation. Please note that no products can be produced during this time and that any orders placed will resume production times as of the 19th of August.
• Upper Race Fairing (6 Dzus)
• Lower Fairing
• Left Side Panel for Big Radiator (3 Dzus)
• Right Side Panel for Big Radiator (3 Dzus)
• Single Race Tail (4 Pcs)
Not included
There are 3 options for seats
• Basic - This seat is a 15mm neoprene foam glued to a base that is molded from the seat pan of the tail section and then attaches to the seat pan with bolts. Please not that these seat's will only fit carbonin seat pans and seat units. It will not work on any other brand. This foam will wear out like any other foam pad.
• Standard - This is an upgrade to the basic seat which is covered in a neoprene material that protects the basic foam and provides the rider a level of grip but without compromising the need to slide side to side. It looks much more professional and will protect the basic foam from any wear from patches on leather suits or abuse from side to side movements. we have seen these seats go on for 3 seasons or more!
• Pro Seat - This seat is for riders or teams that require their seat to provide back support or a step seat to keep them in a position from sliding too far back in the seat under acceleration, this is often done with a raised section so they can still get back in the seat in the full tuck, they are just raised up more which helps keep the butt up and their head shoulders and chest lower in the tuck. It is the same material as the standard seat but can also be customized with team logo's or race number -If you purchase a pro seat we will contact you to design your seat. Please note pro seats are made custom to order
Carbonin Will be closed during the dates of July 27th through August 19th for Summer Vacation. Please note that no products can be produced during this time and that any orders placed will resume production times as of the 19th of August.
• Upper Race Fairing (6 Dzus)
• Lower Fairing (5 Dzus)
• Left Side Panel
• Right Side Panel
• Supersport Race Tail (4 Pcs)
Carbonin Will be closed during the dates of July 27th through August 19th for Summer Vacation. Please note that no products can be produced during this time and that any orders placed will resume production times as of the 19th of August.
• Upper Race Fairing (6 Dzus)
• Lower Fairing
• Left Side Panel (3 Dzus)
• Right Side Panel (3 Dzus)
• Single Race Tail (4 Pcs)
Not included but required:
IN1901Y Seat Bracket
*Cannot fit OEM Seat
Carbonin Will be closed during the dates of July 27th through August 19th for Summer Vacation. Please note that no products can be produced during this time and that any orders placed will resume production times as of the 19th of August.
• Upper
• Lower
• SBK tail unit with support
• Optional
There are 3 options for seats (not included in kit)
Basic - This seat is a 15mm neoprene foam glued to a base that is molded from the seat pan of the tail section and then attaches to the seat pan with bolts. Please not that these seat's will only fit carbonin seat pans and seat units. It will not work on any other brand. This foam will wear out like any other foam pad.
Standard - This is an upgrade to the basic seat which is covered in a neoprene material that protects the basic foam and provides the rider a level of grip but without compromising the need to slide side to side. It looks much more professional and will protect the basic foam from any wear from patches on leather suits or abuse from side to side movements. we have seen these seats go on for 3 seasons or more!
Pro Seat - This seat is for riders or teams that require their seat to provide back support or a step seat to keep them in a position from sliding too far back in the seat under acceleration, this is often done with a raised section so they can still get back in the seat in the full tuck, they are just raised up more which helps keep the butt up and their head shoulders and chest lower in the tuck. It is the same material as the standard seat but can also be customized with team logo's or race number -If you purchase a pro seat we will contact you to design your seat. Please note pro seats are made custom to order
Carbonin Will be closed during the dates of July 27th through August 19th for Summer Vacation. Please note that no products can be produced during this time and that any orders placed will resume production times as of the 19th of August.
• Upper Race Fairing (6 Dzus)
• Lower Fairing (5 Dzus)
• Left Side Panel
• Right Side Panel
• Superbike Tail
Carbonin Will be closed during the dates of July 27th through August 19th for Summer Vacation. Please note that no products can be produced during this time and that any orders placed will resume production times as of the 19th of August.
• Upper Race Fairing (6 Dzus)
• Lower Fairing (5 Dzus)
• Left Side Panel
• Right Side Panel
• Single Race Seat With Fuel Tank Panels (4 Pcs; 1 Dzus)
The 2017-2021 GSXR1000 Bodywork requires the following bracketry for fitment:
Aluminum CNC Inserts Side Panels (ALU1202S)
Inox Holders for Lower Fairing (IN1202S)
The The 2017-2021 GSXR1000 Bodywork also will require 1 of the 2 following tail unit inserts:
Aluminum CNC Tail Inserts Quick Release (Quick Release Bracket w/ DZUS) (ALU1204SCNC)
Aluminum CNC Tail Inserts Bolt On (Hard Mount w/ Bolt) (ALU1204SR)
There are 3 seat options available.
Basic - This seat is a 15mm neoprene foam glued to a base that is molded from the seat pan of the tail section and then attaches to the seat pan with bolts. Please not that these seat's will only fit Carbonin seat pans and seat units. It will not work on any other brand. This foam will wear out like any other foam pad.
Standard - This is an upgrade to the basic seat which is covered in a neoprene material that protects the basic foam and provides the rider a level of grip but without compromising the need to slide side to side. It looks much more professional and will protect the basic foam from any wear from patches on leather suits or abuse from side to side movements. we have seen these seats go on for 3 seasons or more!
Pro Seat - This seat is for riders or teams that require their seat to provide back support or a step seat to keep them in a position from sliding too far back in the seat under acceleration, this is often done with a raised section so they can still get back in the seat in the full tuck, they are just raised up more which helps keep the butt up and their head shoulders and chest lower in the tuck. It is the same material as the standard seat but can also be customized with team logo's or race number -If you purchase a pro seat we will contact you to design your seat. Please note pro seats are made custom to order
Carbonin Tail unit will not work with OEM Seat.
Carbonin Will be closed during the dates of July 27th through August 19th for Summer Vacation. Please note that no products can be produced during this time and that any orders placed will resume production times as of the 19th of August.
• Upper Race Fairing (6 Dzus)
• Lower Fairing
• Single Race Seat (2 Pcs)
•
Carbonin Will be closed during the dates of July 27th through August 19th for Summer Vacation. Please note that no products can be produced during this time and that any orders placed will resume production times as of the 19th of August.
Upper Race Fairing (4 Dzus)
Lower Fairing (4 Dzus)
Left Side Panel
Right Side Panel
Single Race Seat (2 Pcs)
Fuel Tank Cover (Oem; 4 Dzus]
Optional
There are 3 options for seats
Basic - This seat is a 15mm neoprene foam glued to a base that is molded from the seat pan of the tail section and then attaches to the seat pan with bolts. Please not that these seat's will only fit carbonin seat pans and seat units. It will not work on any other brand. This foam will wear out like any other foam pad.
Standard - This is an upgrade to the basic seat which is covered in a neoprene material that protects the basic foam and provides the rider a level of grip but without compromising the need to slide side to side. It looks much more professional and will protect the basic foam from any wear from patches on leather suits or abuse from side to side movements. we have seen these seats go on for 3 seasons or more!
Pro Seat - This seat is for riders or teams that require their seat to provide back support or a step seat to keep them in a position from sliding too far back in the seat under acceleration, this is often done with a raised section so they can still get back in the seat in the full tuck, they are just raised up more which helps keep the butt up and their head shoulders and chest lower in the tuck. It is the same material as the standard seat but can also be customized with team logo's or race number -If you purchase a pro seat we will contact you to design your seat. Please note pro seats are made custom to order
Carbonin Will be closed during the dates of July 27th through August 19th for Summer Vacation. Please note that no products can be produced during this time and that any orders placed will resume production times as of the 19th of August.
• Upper Race Fairing (8 Dzus)
• Lower Fairing (4 Dzus)
• Left Side Panel
• Right Side Panel
• Single Race Seat (2 Pcs; 5 Dzus)
Required fitment kit to mount this fairing
• Aluminum support for side panels (2 pcs with 2 Dzus)
• air box inlet tubes
Carbonin Will be closed during the dates of July 27th through August 19th for Summer Vacation. Please note that no products can be produced during this time and that any orders placed will resume production times as of the 19th of August.
• Upper Race Fairing (8 Dzus)
• Lower Fairing
• Left Side Panel (3 Dzus)
• Right Side Panel (3 Dzus)
• Single Race Tail (2 Pcs)
There are 3 options for seats (not included in kit)
Basic - This seat is a 15mm neoprene foam glued to a base that is molded from the seat pan of the tail section and then attaches to the seat pan with bolts. Please not that these seat's will only fit carbonin seat pans and seat units. It will not work on any other brand. This foam will wear out like any other foam pad.
Standard - This is an upgrade to the basic seat which is covered in a neoprene material that protects the basic foam and provides the rider a level of grip but without compromising the need to slide side to side. It looks much more professional and will protect the basic foam from any wear from patches on leather suits or abuse from side to side movements. we have seen these seats go on for 3 seasons or more!
Pro Seat - This seat is for riders or teams that require their seat to provide back support or a step seat to keep them in a position from sliding too far back in the seat under acceleration, this is often done with a raised section so they can still get back in the seat in the full tuck, they are just raised up more which helps keep the butt up and their head shoulders and chest lower in the tuck. It is the same material as the standard seat but can also be customized with team logo's or race number -If you purchase a pro seat we will contact you to design your seat. Please note pro seats are made custom to order
Carbonin Will be closed during the dates of July 27th through August 19th for Summer Vacation. Please note that no products can be produced during this time and that any orders placed will resume production times as of the 19th of August.
• Upper Race Fairing (6 Dzus)
• Lower Fairing
• Left Side Panel (3 Dzus)
• Right Side Panel (3 Dzus)
• Single Race Seat
Carbonin Will be closed during the dates of July 27th through August 19th for Summer Vacation. Please note that no products can be produced during this time and that any orders placed will resume production times as of the 19th of August.
• Upper Race Fairing (8 Dzus)
• Lower Fairing (4 Dzus)
• Left Side Panel
• Right Side Panel
• Single Race Seat (2 Pcs; 5 Dzus)
Required fitment kit to mount this fairing
• Aluminum support for side panels (2 pcs with 2 Dzus)
• air box inlet tubes
Carbonin Will be closed during the dates of July 27th through August 19th for Summer Vacation. Please note that no products can be produced during this time and that any orders placed will resume production times as of the 19th of August.
• upper race faring (4 Dzus)
• lower fairing
• left side panel with optional ecu or rectifier housing. ecu for oem placement or Race for the YEC harness which houses the regulator rectifier
• right side panel
• single race seat (3 pcs) Standard seat can be used but you need to modify the battery retention plate
Not included
There are 3 options for seats
• Basic - This seat is a 15mm neoprene foam glued to a base that is molded from the seat pan of the tail section and then attaches to the seat pan with bolts. Please not that these seat's will only fit carbonin seat pans and seat units. It will not work on any other brand. This foam will wear out like any other foam pad.
• Standard - This is an upgrade to the basic seat which is covered in a neoprene material that protects the basic foam and provides the rider a level of grip but without compromising the need to slide side to side. It looks much more professional and will protect the basic foam from any wear from patches on leather suits or abuse from side to side movements. we have seen these seats go on for 3 seasons or more!
• Pro Seat - This seat is for riders or teams that require their seat to provide back support or a step seat to keep them in a position from sliding too far back in the seat under acceleration, this is often done with a raised section so they can still get back in the seat in the full tuck, they are just raised up more which helps keep the butt up and their head shoulders and chest lower in the tuck. It is the same material as the standard seat but can also be customized with team logo's or race number -If you purchase a pro seat we will contact you to design your seat. Please note pro seats are made custom to order
Tail Light Cut Out Option - with Moto America rules requiring a rain light there is an option for the oem tail light to be used. the light hole will be cut out and the light will attach like oem fitting. There are no Provisions for headlights to work with this kit- this would require custom modification.
Carbonin Will be closed during the dates of July 27th through August 19th for Summer Vacation. Please note that no products can be produced during this time and that any orders placed will resume production times as of the 19th of August.
• Upper Race Fairing (4 Dzus)
• Lower Fairing
• Single Race Seat
• Fuel Tank Cover (Oem)
Carbonin Will be closed during the dates of July 27th through August 19th for Summer Vacation. Please note that no products can be produced during this time and that any orders placed will resume production times as of the 19th of August.
Lower Fairing (for oversized Radiator, Does fit OEM)
Left Side Panel (for oversized Radiator, Does fit OEM)
Right Side Panel (for oversized Radiator, Does fit OEM)
Single Race Seat (3 Pcs)
Please Note that this Kit has been designed to be used witha bracket kit so the fairing can be mounted to the bike with Dzus fasteners.
Cnc billet option
Optional
There are 3 options for seats
Basic - This seat is a 15mm neoprene foam glued to a base that is molded from the seat pan of the tail section and then attaches to the seat pan with bolts. Please not that these seat's will only fit carbonin seat pans and seat units. It will not work on any other brand. This foam will wear out like any other foam pad.
Standard - This is an upgrade to the basic seat which is covered in a neoprene material that protects the basic foam and provides the rider a level of grip but without compromising the need to slide side to side. It looks much more professional and will protect the basic foam from any wear from patches on leather suits or abuse from side to side movements. we have seen these seats go on for 3 seasons or more!
Pro Seat - This seat is for riders or teams that require their seat to provide back support or a step seat to keep them in a position from sliding too far back in the seat under acceleration, this is often done with a raised section so they can still get back in the seat in the full tuck, they are just raised up more which helps keep the butt up and their head shoulders and chest lower in the tuck. It is the same material as the standard seat but can also be customized with team logo's or race number -If you purchase a pro seat we will contact you to design your seat. Please note pro seats are made custom to order
Tail Light Cut Out Option - with Moto America rules requiring a rain light there is an option for the oem tail light to be used. the light hole will be cut out and the light will attach like oem fitting. There are no Provisions for headlights to work with this kit- this would require custom modification
Carbonin Will be closed during the dates of July 27th through August 19th for Summer Vacation. Please note that no products can be produced during this time and that any orders placed will resume production times as of the 19th of August.
• Upper Race Fairing
• Lower Fairing (6 Dzus)
• Single Race Seat
• Fuel Tank Cover (Oem)
Carbonin Will be closed during the dates of July 27th through August 19th for Summer Vacation. Please note that no products can be produced during this time and that any orders placed will resume production times as of the 19th of August.
• SBK Upper Race Fairing (8 Dzus) Has Larger area on upper fairing and Larger air intake tubes. *requires Airtubes and Windshield
• Lower Fairing (4 Dzus)
• Left Side Panel
• Right Side Panel
• Single Race Seat (3 Pcs)
Optional
There are 3 options for seats
Basic - This seat is a 15mm neoprene foam glued to a base that is molded from the seat pan of the tail section and then attaches to the seat pan with bolts. Please not that these seat's will only fit carbonin seat pans and seat units. It will not work on any other brand. This foam will wear out like any other foam pad.
Standard - This is an upgrade to the basic seat which is covered in a neoprene material that protects the basic foam and provides the rider a level of grip but without compromising the need to slide side to side. It looks much more professional and will protect the basic foam from any wear from patches on leather suits or abuse from side to side movements. we have seen these seats go on for 3 seasons or more!
Pro Seat - This seat is for riders or teams that require their seat to provide back support or a step seat to keep them in a position from sliding too far back in the seat under acceleration, this is often done with a raised section so they can still get back in the seat in the full tuck, they are just raised up more which helps keep the butt up and their head shoulders and chest lower in the tuck. It is the same material as the standard seat but can also be customized with team logo's or race number -If you purchase a pro seat we will contact you to design your seat. Please note pro seats are made custom to order
Carbonin Will be closed during the dates of July 27th through August 19th for Summer Vacation. Please note that no products can be produced during this time and that any orders placed will resume production times as of the 19th of August.
Upper Race Fairing (6 Dzus)
Lower Fairing
Left Side Panel (2 Dzus)
Right Side Panel (2 Dzus)
Single Race Seat (2 Pcs) There are 3 options for seats
• Basic - This seat is a 15mm neoprene foam glued to a base that is molded from the seat pan of the tail section and then attaches to the seat pan with bolts. Please not that these seat's will only fit carbonin seat pans and seat units. It will not work on any other brand. This foam will wear out like any other foam pad.
• Standard - This is an upgrade to the basic seat which is covered in a neoprene material that protects the basic foam and provides the rider a level of grip but without compromising the need to slide side to side. It looks much more professional and will protect the basic foam from any wear from patches on leather suits or abuse from side to side movements. we have seen these seats go on for 3 seasons or more!
• Pro Seat - This seat is for riders or teams that require their seat to provide back support or a step seat to keep them in a position from sliding too far back in the seat under acceleration, this is often done with a raised section so they can still get back in the seat in the full tuck, they are just raised up more which helps keep the butt up and their head shoulders and chest lower in the tuck. It is the same material as the standard seat but can also be customized with team logo's or race number -If you purchase a pro seat we will contact you to design your seat. Please note pro seats are made custom to order
Carbonin Will be closed during the dates of July 27th through August 19th for Summer Vacation. Please note that no products can be produced during this time and that any orders placed will resume production times as of the 19th of August.
• SBK Upper Race Fairing (8 Dzus) Has Larger area on upper fairing and Larger air intake tubes. *requires Airtubes and Windshield
• Lower Fairing (4 Dzus)
• Left Side Panel
• Right Side Panel
• Single Race Seat (3 Pcs)
Carbonin Will be closed during the dates of July 27th through August 19th for Summer Vacation. Please note that no products can be produced during this time and that any orders placed will resume production times as of the 19th of August.
Left Side Panel
Right Side Panel
Race Seat Unit (3 Pcs) Uses oem Seat
Parts needed to fit complete race fairing: when fitting to 1299 Panigale Aluminum dashboard stay (only required when installing to 1299) Optional for 1199 and 899
This bodywork uses the oem Dzus fasteners from oem bodywork.
This kit was designed for a 1199 and can be mounted to a 1299 with the fairing bracket and air tube however you will need to order a windshield for a 1199 Panigale
Carbonin Will be closed during the dates of July 27th through August 19th for Summer Vacation. Please note that no products can be produced during this time and that any orders placed will resume production times as of the 19th of August.
• Upper SBK Race Fairing (6 Dzus) Has a larger Surface area and requires SBK windshield
• Lower Fairing
• Left Side Panel (3 Dzus)
• Right Side Panel (3 Dzus)
• SBK tail unit
Carbonin Will be closed during the dates of July 27th through August 19th for Summer Vacation. Please note that no products can be produced during this time and that any orders placed will resume production times as of the 19th of August.
• Upper Race Fairing (8 Dzus)
• Lower Fairing (4 Dzus)
• Left Side Panel
• Right Side Panel
• Single Race Seat (3 Pcs)
Carbonin Will be closed during the dates of July 27th through August 19th for Summer Vacation. Please note that no products can be produced during this time and that any orders placed will resume production times as of the 19th of August.
Upper Race Fairing (4 Dzus)
Lower Fairing
Single Race Seat
Fuel Tank Cover (Oem)
Optional
There are 3 options for seats
Basic - This seat is a 15mm neoprene foam glued to a base that is molded from the seat pan of the tail section and then attaches to the seat pan with bolts. Please not that these seat's will only fit carbonin seat pans and seat units. It will not work on any other brand. This foam will wear out like any other foam pad.
Standard - This is an upgrade to the basic seat which is covered in a neoprene material that protects the basic foam and provides the rider a level of grip but without compromising the need to slide side to side. It looks much more professional and will protect the basic foam from any wear from patches on leather suits or abuse from side to side movements. we have seen these seats go on for 3 seasons or more!
Pro Seat - This seat is for riders or teams that require their seat to provide back support or a step seat to keep them in a position from sliding too far back in the seat under acceleration, this is often done with a raised section so they can still get back in the seat in the full tuck, they are just raised up more which helps keep the butt up and their head shoulders and chest lower in the tuck. It is the same material as the standard seat but can also be customized with team logo's or race number -If you purchase a pro seat we will contact you to design your seat. Please note pro seats are made custom to order
Carbonin Will be closed during the dates of July 27th through August 19th for Summer Vacation. Please note that no products can be produced during this time and that any orders placed will resume production times as of the 19th of August.
Upper Race Fairing (6 Dzus)
Lower Fairing (For oem Exhaust) not race legal
Left Side Panel (3 Dzus)
Right Side Panel (3 Dzus)
Single Race Seat (3 Pcs)
Optional
There are 3 options for seats
Basic - This seat is a 15mm neoprene foam glued to a base that is molded from the seat pan of the tail section and then attaches to the seat pan with bolts. Please not that these seat's will only fit carbonin seat pans and seat units. It will not work on any other brand. This foam will wear out like any other foam pad.
Standard - This is an upgrade to the basic seat which is covered in a neoprene material that protects the basic foam and provides the rider a level of grip but without compromising the need to slide side to side. It looks much more professional and will protect the basic foam from any wear from patches on leather suits or abuse from side to side movements. we have seen these seats go on for 3 seasons or more!
Pro Seat - This seat is for riders or teams that require their seat to provide back support or a step seat to keep them in a position from sliding too far back in the seat under acceleration, this is often done with a raised section so they can still get back in the seat in the full tuck, they are just raised up more which helps keep the butt up and their head shoulders and chest lower in the tuck. It is the same material as the standard seat but can also be customized with team logo's or race number -If you purchase a pro seat we will contact you to design your seat. Please note pro seats are made custom to order
Carbonin Will be closed during the dates of July 27th through August 19th for Summer Vacation. Please note that no products can be produced during this time and that any orders placed will resume production times as of the 19th of August.
TRACK ADDICTED / HIGH PERFORMANCE RACING / HOT CLIMATE
FEATURES:
-TCX RT-RACE PRO AIR boot certification: CE,FFC,DFC.
-Made for Hot Weather Riding - Perforated microfibre upper, padded flex areas, Fasten Fit Control lacing system, side zipper, ratcheting calf closure with microfiber gaitor, abrasion-resistant microfibre heat guard.
-Dual Flex Control System.
-Polyurethane shin plate with metal mesh air intakes.
-Michelin Soles
-Magneisum Toe Sliders
-Integrated inner liner
-Short Break-in Period
-Made in Italy and used by Championship winning riders from around the world!
Parts Included In Complete SBK Fairing:
• Upper SBK Race Fairing (6 Dzus)
• Lower Fairing
• Left Side Panel (3 Dzus)
• Right Side Panel (3 Dzus)
• Single Race Seat
Carbonin Will be closed during the dates of July 27th through August 19th for Summer Vacation. Please note that no products can be produced during this time and that any orders placed will resume production times as of the 19th of August.
• Upper Race Fairing Oem Style(6 Dzus)
• Lower Fairing
• Left Side Panel (3 Dzus)
• Right Side Panel (3 Dzus)
• SBK tail unit
Carbonin Will be closed during the dates of July 27th through August 19th for Summer Vacation. Please note that no products can be produced during this time and that any orders placed will resume production times as of the 19th of August.
Hrc Upper Fainng (8 Dzus)
Hrc Lower Fairing
Hrc Single Race Seat
Hrc Fuel Tank Cover
*May be modified to work with oem subframe so we recommend HRC Subframe
Carbonin Will be closed during the dates of July 27th through August 19th for Summer Vacation. Please note that no products can be produced during this time and that any orders placed will resume production times as of the 19th of August.
Carbonin Will be closed during the dates of July 27th through August 19th for Summer Vacation. Please note that no products can be produced during this time and that any orders placed will resume production times as of the 19th of August.
Upper Race Fairing With Adapter (2 Pcs)
Left Side Panel
Right Side Panel
Lower Race Fairing
Single Race tail (Oem style) Uses oem seat
Carbonin Will be closed during the dates of July 27th through August 19th for Summer Vacation. Please note that no products can be produced during this time and that any orders placed will resume production times as of the 19th of August.
• Upper Race Fairing
• Left Side Panel
• Right Side Panel
• Race Tail unit 3 pieces
•
• Please Note That Oil containment pan will need to be purchased separate from the kit
• Uses OEM Seat
Please note this kit was designed for the 899 and 1199 Panigale and requires bracketry for installing
This may be installed on a 1299 with the brackets however the Aluminum fairing bracket ALU4002D must be used in combination with the airbox inlet tubes CD4064 due to the difference in shape.
1199 windscreen is also required
Carbonin Will be closed during the dates of July 27th through August 19th for Summer Vacation. Please note that no products can be produced during this time and that any orders placed will resume production times as of the 19th of August.
***Made specifically for the ZX-6R, will not fit the 636! for ZX636 use K01E 310 mm rotors
300mm x 5.75mm
-Sold as a set Left and Right
-Bobbin-less
-Exclusive Carrier Technology
-More Arms than any other leading competitor
-5.75mm thickness
-This would be the correct fit for Aftermarket wheels such as Rotobox Dymag or OZ wheels.
-Hand-crafted from Billet Metal
-Better Cooling
-Increased braking modulation
-Excellent pad cleaning
-Reduced residual torque
-Improved safety
If you are using different calipers that require a Narrow Band Rotor please let us know when ordering so we can make sure you receive the correct size for your brake set up. Ie some Brembo Calipers use a Narrow Pad
If your using the oem Brembo this rotor application is correct
310mm rotors are SPECIFICALLY FOR THE NINJA ZX 636!
310mm x 5.75mm
-Sold as a set Left and Right
-Bobbin-less
-Exclusive Carrier Technology
-More Arms than any other leading competitor
-5.75mm thickness
-This would be the correct fit for Aftermarket wheels such as Rotobox Dymag or OZ wheels.
-Hand-crafted from Billet Metal
-Better Cooling
-Increased braking modulation
-Excellent pad cleaning
-Reduced residual torque
-Improved safety
If you are using different calipers that require a Narrow Band Rotor please let us know when ordering so we can make sure you receive the correct size for your brake set up. Ie some Brembo Calipers use a Narrow Pad
If your using the oem Brembo this rotor application is correct
-310mm x 5.75mm
-Sold as a set Left and Right
-Bobbin-less
-Exclusive Carrier Technology
-More Arms than any other leading competitor
-5.75mm thickness
-This would be the correct fit for Aftermarket wheels such as Rotobox Dymag or OZ wheels.
-Hand-crafted from Billet Metal
-Better Cooling
-Increased braking modulation
-Excellent pad cleaning
-Reduced residual torque
-Improved safety
If you are using different calipers that require a Narrow Band Rotor please let us know when ordering so we can make sure you receive the correct size for your brake set up. Ie some Brembo Calipers use a Narrow Pad
If your using the oem Brembo this rotor application is correct
-320mm x 5.75mm
-Bobbin-Less
-Exclusive Carrier Technology
-Sold as a set Left and Right
-Hand-crafted from Billet Metal
-Better Cooling
-Increased braking modulation
-Excellent pad cleaning
-Reduced residual torque
-Improved safety
-330mm x 5.75mm
-This would be the correct fit for Aftermarket wheels such as Rotobox, Dymag or OZ Wheels.
-This will not fit the ZX10RR Marchesini Wheel
-Bobbin-Less
-Exclusive Carrier Technology
-Sold as a set Left and Right
-Hand-crafted from Billet Metal
-Better Cooling
-Increased braking modulation
-Excellent pad cleaning
-Reduced residual torque
-Improved safety
If you are using different calipers that require a Narrow Band Rotor please let us know when ordering so we can make sure you receive the correct size for your brake set up. Ie some Brembo Calipers use a Narrow Pad
If your using the oem Brembo this rotor application is correct
-Bobbin-less
-Exclusive Carrier Technology
-More Arms than any other leading competitor
-5.75mm thickness
-Sold as a set Left and Right
-Hand-crafted from Billet Metal
-Better Cooling
-Increased braking modulation
-Excellent pad cleaning
-Reduced residual torque
-Improved safety
If you are using different calipers that require a Narrow Band Rotor please let us know when ordering so we can make sure you receive the correct size for your brake set up. Ie some Brembo Calipers use a Narrow Pad
If your using the oem Brembo this rotor application is correct
Fits 2020 throu 23 K67 BMW S1000RR M or Carbon front wheel and M1000RR K66
-320mm x 5.75mm
-Bobbin-Less
-Exclusive Carrier Technology
-Sold as a set Left and Right
-Hand-crafted from Billet Metal
-Better Cooling
-Increased braking modulation
-Excellent pad cleaning
-Reduced residual torque
-Improved safety
-Bobbin-less
-Exclusive Carrier Technology
-More Arms than any other leading competitor
-5.75mm thickness
-Sold as a set Left and Right
-Hand-crafted from Billet Metal
-Better Cooling
-Increased braking modulation
-Excellent pad cleaning
-Reduced residual torque
-Improved safety
If you are using different calipers that require a Narrow Band Rotor please let us know when ordering so we can make sure you receive the correct size for your brake set up. Ie some Brembo Calipers use a Narrow Pad
If your using the oem Brembo this rotor application is correct
-Bobbin-less
-Exclusive Carrier Technology
-More Arms than any other leading competitor
-5.75mm thickness
-Sold as a set Left and Right
-Hand-crafted from Billet Metal
-Better Cooling
-Increased braking modulation
-Excellent pad cleaning
-Reduced residual torque
-Improved safety
If you are using different calipers that require a Narrow Band Rotor please let us know when ordering so we can make sure you receive the correct size for your brake set up. Ie some Brembo Calipers use a Narrow Pad
If your using the oem Brembo this rotor application is correct
Popular Brands:
- 4SR
- Accossato
- AiM Sports
- Akrapovic
- Alpha Racing Performance Parts
- Andreani
- ANTIGRAVITY BATTERIES
- APX Racing
- Attack Performance
- Bell Helmets
- Bonamici Racing
- Braketech
- Brembo
- BST
- Capit
- Carbonin
- Cordona
- Cox Racing Group
- D.I.D Chains
- Domino
- Dymag Performance Wheels
- Extreme Components
- Factory FX
- Fren Tubo
- FTECU
- Galfer
- Goodridge
- GPR
- Graves Motorsports
- HHR Performance
- i2M
- Ilimberger Carbon
- KYT Helmets
- LighTech
- Liqui Moly
- Maxem Motorsports
- Maxima Racing Oils
- MiVV Exhausts
- Motion Pro
- Motoholders
- MRA
- MSS Performance
- MWR
- Nitron Racing Shocks
- Öhlins
- Pro Bolt
- Qnium
- Rapid Bike
- Renthal
- Rizoma
- Rotobox
- Samco Sport
- SBS Brake Pads
- SE Moto
- Sharkskinz
- SpeedCell
- Sprint Filter
- Stringer Stacks
- SUPERLITE
- Supreme Technology
- Suter Racing
- TCX
- TechSpec
- Teknofibra
- Termignoni
- Tightails
- TK Dischi Freno
- Translogic Systems
- Vesrah
- Wera
- Zero Gravity
- Arata Exhausts
- Armour Bodies
- Beringer
- Brocks Performance
- Jet Prime
- K-Tech Suspension
- Melotti Racing
- World Wide Bearings