HHR Performance » Carbonin

Carbonin

Leaders In Manufacturing Quality Motorcycle Fairings & Accessories Carbonin Offer Full Carbon Fiber fairings and crash protection as well as avio fiber for a superior product for motorcycle racing fairings making them Light weight and durable.

  • Full carbon fiber Race fairing Kits
  • Air intake tubes and Fairing Brackets
  • Frame and Swingarm Protection
  • Engine case covers
  • Fenders & Huggers
  • Avio Fiber Race Fairing Kits
  • Pre Installed with Dzus
  • Quick Release Bracket options
  • FIM World Endurance headlight tail light options
  • Moto America Tail light options

Carbonin Categories

View  
Items 1-6 of 6
No Image Available
Bodywork
HHR Performance only carries aftermarket motorcycle bodywork, fairings, and windshields that are of the highest quality. We carry options such as Carbonin carbon fiber and Avio fiber race bodywork,...More Details »
Chassis & Suspension
Motorcycle Chassis and Parts HHR Performance is your online resource for all your high-performance motorcycle chassis, parts, and components, including front fairing brackets, rear subframes,...More Details »
Crash Protection & Safety
Motorcycle Bike and Crash Protection Browse our online selection of motorcycle bike and crash protection, including engine case covers, exhaust protectors, and sliders utilized by the professionals.
Featured Products
 Accessories
At HHR Performance, we only deal with high-performance, aftermarket motorcycle accessories that are quality built to withstand the rigors associated with high-speed racing. You won’t find any...More Details »
Items 1-6 of 6

Carbonin Products

Sort
View
 
Items 1-60 of 917
Description: Parts Included with Kit
upper race faring (6 Dzus)
lower fairing (4 Dzus)
left side panel right side panel
single race seat/Tail unit(2 pcs)
Airbox Cover With side panels Required to install- Bracket kit for Installation (must be purchased separately) IN403B
There are 2 types of Rear Bracket kits- oem and SBK subframe
Optional Not Included -There are 3 options for seats

Basic - This seat is a 15mm neoprene foam glued to a base that is molded from the seat pan of the tail section and then attaches to the seat pan with bolts. Please not that these seat's will only fit carbonin seat pans and seat units. It will not work on any other brand. This foam will wear out like any other foam pad.
Standard - This is an upgrade to the basic seat which is covered in a neoprene material that protects the basic foam and provides the rider a level of grip but without compromising the need to slide side to side. It looks much more professional and will protect the basic foam from any wear from patches on leather suits or abuse from side to side movements. we have seen these seats go on for 3 seasons or more!
Pro Seat - This seat is for riders or teams that require their seat to provide back support or a step seat to keep them in a position from sliding too far back in the seat under acceleration, this is often done with a raised section so they can still get back in the seat in the full tuck, they are just raised up more which helps keep the butt up and their head shoulders and chest lower in the tuck. It is the same material as the standard seat but can also be customized with team logo's or race number -If you purchase a pro seat we will contact you to design your seat. Please note pro seats are made custom to order
Item #: CB42100
Condition: New
These are not designed to fit with any of the OEM panels
Price: $2,848.61


Description: Replacement left side fairing with Dzus
Item #: K18231AF
Condition: New
Limited Supply: Only 3 Left!
These are not designed to fit with any of the OEM panels
Price: $195.58

Qty:

Description: Replacement lower fairing
Item #: K18220AF
Condition: New
Limited Supply: Only 2 Left!
These are not designed to fit with any of the OEM panels
Price: $157.48

Qty:

Description: • Upper Race Fairing (8 Dzus)
• Lower Fairing
• Left Side Panel (3 Dzus)
• Right Side Panel (3 Dzus)
• Single Race Seat (2 Pcs)

There are 3 options for seats
• Basic - This seat is a 15mm neoprene foam glued to a base that is molded from the seat pan of the tail section and then attaches to the seat pan with bolts. Please not that these seat's will only fit carbonin seat pans and seat units. It will not work on any other brand. This foam will wear out like any other foam pad.
• Standard - This is an upgrade to the basic seat which is covered in a neoprene material that protects the basic foam and provides the rider a level of grip but without compromising the need to slide side to side. It looks much more professional and will protect the basic foam from any wear from patches on leather suits or abuse from side to side movements. we have seen these seats go on for 3 seasons or more!
• Pro Seat - This seat is for riders or teams that require their seat to provide back support or a step seat to keep them in a position from sliding too far back in the seat under acceleration, this is often done with a raised section so they can still get back in the seat in the full tuck, they are just raised up more which helps keep the butt up and their head shoulders and chest lower in the tuck. It is the same material as the standard seat but can also be customized with team logo's or race number -If you purchase a pro seat we will contact you to design your seat. Please note pro seats are made custom to order
Item #: K18100AF
Condition: New
These are not designed to fit with any of the OEM panels
Price: $1,045.21


Description: Parts Included in Complete Kit
• upper race fairing (6 Dzus)
• lower fairing
• left side panel 2Dzus
• right side panel 3 Dzus
• single Tail unit (4pcs) Superbike style, OEM seat can not be used

Required Parts
• Stainless steel Seat Unit bracket with dzus *Required to install tail section IN1801Y
• Stainless steel Lower left bracket with dzus (only required if stock bracket is not present) IN1802Y

Not Included
• Fenders
• Airbox Cover
• Seat Unit
Item #: Y18200AF
Condition: New
These are not designed to fit with any of the OEM panels
Price: $1,035.05


Description: Parts Included In Complete Race Fairing Version 1:
• Upper Race Fairing (6 Dzus)
• Lower Fairing (Oem Radiator; 6 Dzus)
• Left Side Panel (Oem Radiator)
• Right Side Panel (Oem Radiator)
• Single Race Seat (3 Pcs)
Please Note that this Kit has been designed to be used with 1 of 2 REQUIRED bracket kits so the fairing can be mounted to the bike with Dzus fasteners:
Option 1: aluminium fairing support (4 pcs with 3 Dzus) ALU3113B
Option 2: inox holders (4 pcs with 4 Dzus) IN3114B


Basic - This seat is a 15mm neoprene foam glued to a base that is molded from the seat pan of the tail section and then attaches to the seat pan with bolts. Please not that these seat's will only fit carbonin seat pans and seat units. It will not work on any other brand. This foam will wear out like any other foam pad.
Standard - This is an upgrade to the basic seat which is covered in a neoprene material that protects the basic foam and provides the rider a level of grip but without compromising the need to slide side to side. It looks much more professional and will protect the basic foam from any wear from patches on leather suits or abuse from side to side movements. we have seen these seats go on for 3 seasons or more!
Pro Seat - This seat is for riders or teams that require their seat to provide back support or a step seat to keep them in a position from sliding too far back in the seat under acceleration, this is often done with a raised section so they can still get back in the seat in the full tuck, they are just raised up more which helps keep the butt up and their head shoulders and chest lower in the tuck. It is the same material as the standard seat but can also be customized with team logo's or race number -If you purchase a pro seat we will contact you to design your seat. Please note pro seats are made custom to order
Avio fiber replacement panel , reinforced with carbon fiber and comes with pre-installed dzus for perfect fitment. Finished in a white gelcoat.
Item #: B3100AF-Kit
Condition: New
These are not designed to fit with any of the OEM panels
Price: $979.17


Description: Parts Included with Kit
upper race faring (6 Dzus)
lower fairing (4 Dzus)
left side panel right side panel
single race seat/Tail unit(2 pcs)
Airbox Cover With side panels Required to install- Bracket kit for Installation (must be purchased separately) IN403B
There are 2 types of Rear Bracket kits- oem and SBK subframe
There are 3 options for seats

Basic - This seat is a 15mm neoprene foam glued to a base that is molded from the seat pan of the tail section and then attaches to the seat pan with bolts. Please not that these seat's will only fit carbonin seat pans and seat units. It will not work on any other brand. This foam will wear out like any other foam pad.
Standard - This is an upgrade to the basic seat which is covered in a neoprene material that protects the basic foam and provides the rider a level of grip but without compromising the need to slide side to side. It looks much more professional and will protect the basic foam from any wear from patches on leather suits or abuse from side to side movements. we have seen these seats go on for 3 seasons or more!
Pro Seat - This seat is for riders or teams that require their seat to provide back support or a step seat to keep them in a position from sliding too far back in the seat under acceleration, this is often done with a raised section so they can still get back in the seat in the full tuck, they are just raised up more which helps keep the butt up and their head shoulders and chest lower in the tuck. It is the same material as the standard seat but can also be customized with team logo's or race number -If you purchase a pro seat we will contact you to design your seat. Please note pro seats are made custom to order


Please Note OEM air intake will need to be modified to fit race bodywork. It is recommended to use the racing fairing bracket and air intake tube
Item #: CB42100AF
Condition: New
Limited Supply: Only 1 Left!
These are not designed to fit with any of the OEM panels
Price: $1,435.10


Description: Replacement right side fairing with Dzus
Item #: K18232AF
Condition: New
Limited Supply: Only 1 Left!
These are not designed to fit with any of the OEM panels
Price: $195.58

Qty:

Description: Replacement upper fairing with Dzus
Item #: K18210AF
Condition: New
Limited Supply: Only 2 Left!
These are not designed to fit with any of the OEM panels
Price: $354.33


Description: Replacement left side Fairing For Carbonin complete fairing, will not fit with other brands
Item #: CK18231
Condition: New
These are not designed to fit with any of the OEM panels
Price: $377.83

Qty:

Description: Replacement lower race Fairing For Carbonin complete fairing, will not fit with other brands
Item #: CK18220
Condition: New
These are not designed to fit with any of the OEM panels
Price: $339.09

Qty:

Description: Upper Race Fairing (6 Dzus)
Lower Fairing (for oversized Radiator, Does fit OEM)
Left Side Panel (for oversized Radiator, Does fit OEM)
Right Side Panel (for oversized Radiator, Does fit OEM)
Single Race Seat (3 Pcs)
Please Note that this Kit has been designed to be used witha bracket kit so the fairing can be mounted to the bike with Dzus fasteners.


Cnc billet option

Optional

There are 3 options for seats

Basic - This seat is a 15mm neoprene foam glued to a base that is molded from the seat pan of the tail section and then attaches to the seat pan with bolts. Please not that these seat's will only fit carbonin seat pans and seat units. It will not work on any other brand. This foam will wear out like any other foam pad.
Standard - This is an upgrade to the basic seat which is covered in a neoprene material that protects the basic foam and provides the rider a level of grip but without compromising the need to slide side to side. It looks much more professional and will protect the basic foam from any wear from patches on leather suits or abuse from side to side movements. we have seen these seats go on for 3 seasons or more!
Pro Seat - This seat is for riders or teams that require their seat to provide back support or a step seat to keep them in a position from sliding too far back in the seat under acceleration, this is often done with a raised section so they can still get back in the seat in the full tuck, they are just raised up more which helps keep the butt up and their head shoulders and chest lower in the tuck. It is the same material as the standard seat but can also be customized with team logo's or race number -If you purchase a pro seat we will contact you to design your seat. Please note pro seats are made custom to order
Tail Light Cut Out Option - with Moto America rules requiring a rain light there is an option for the oem tail light to be used. the light hole will be cut out and the light will attach like oem fitting. There are no Provisions for headlights to work with this kit- this would require custom modification
Item #: CB3101
Condition: New
These are not designed to fit with any of the OEM panels
Price: $1,995.17


Description: Parts Included In Complete Race Fairing:
• Upper Race Fairing (8 Dzus)
• Lower Fairing
• Left Side Panel (3 Dzus)
• Right Side Panel (3 Dzus)
• Single Race Seat (2 Pcs)
There are 3 options for seats (not included in kit)

Basic - This seat is a 15mm neoprene foam glued to a base that is molded from the seat pan of the tail section and then attaches to the seat pan with bolts. Please not that these seat's will only fit carbonin seat pans and seat units. It will not work on any other brand. This foam will wear out like any other foam pad.
Standard - This is an upgrade to the basic seat which is covered in a neoprene material that protects the basic foam and provides the rider a level of grip but without compromising the need to slide side to side. It looks much more professional and will protect the basic foam from any wear from patches on leather suits or abuse from side to side movements. we have seen these seats go on for 3 seasons or more!
Pro Seat - This seat is for riders or teams that require their seat to provide back support or a step seat to keep them in a position from sliding too far back in the seat under acceleration, this is often done with a raised section so they can still get back in the seat in the full tuck, they are just raised up more which helps keep the butt up and their head shoulders and chest lower in the tuck. It is the same material as the standard seat but can also be customized with team logo's or race number -If you purchase a pro seat we will contact you to design your seat. Please note pro seats are made custom to order
Item #: CK18100
Condition: New
These are not designed to fit with any of the OEM panels
Price: $2,136.14


These are not designed to fit with any of the OEM panels
Price: $377.83

Qty:

Description: Replacement SBK Tail unit for carbonin bodywork
Item #: CK18300
Condition: New
These are not designed to fit with any of the OEM panels
Price: $624.84


Description: Replacement Upper Fairing For Carbonin complete fairing, will not fit with other brands
Item #: CK18210
Condition: New
These are not designed to fit with any of the OEM panels
Price: $565.15


Description: "This is a 1 piece airbox cover that has the side panels built in to Replace the oem Airbox Cover and side panels
It comes Ready to install on your Bike with Perfect Fitment
Made from avio fiber with epoxy resin"
Item #: Y19425AF
Condition: New
Limited Supply: Only 3 Left!
Price: $245.11

Qty:

Description: Full length air intake for race use. works only with ALY19001Y Aluminum bracket
Item #: Y19064AF
Condition: New
Please, These are not designed to fit with any of the OEM panels. They are made for racing and will break under street conditions aka trash wheelies.
Price: $170.62

Qty:

Description: Zluminum brackets for side panels *required
Item #: ALU2112MV
Condition: New
Limited Supply: Only 1 Left!
These are not designed to fit with any of the OEM panels
Price: $79.40

Qty:

Description: R1 seat for Carbonin bodywork


Pictures are shown for reference only and may not accurately represent the exact model of your seat
Item #: FM1910YS
Condition: New
These are not designed to fit with any of the OEM panels
Price: $129.92

Qty:

Description: ZX10r front fender for racing
Item #: K16010AF
Condition: New
Limited Supply: Only 1 Left!
Price: $114.30

Qty:

Description: Gsxr600/750 front fender for racing
Item #: S10010AF
Condition: New
Limited Supply: Only 1 Left!
Price: $107.95

Qty:

Description: 2020 S1000rr front fender for racing
Item #: CB4010AF
Condition: New
Limited Supply: Only 5 Left!
Price: $133.35

Qty:

Description: 2020 R1 Front fender for racing
Item #: Y19010AF
Condition: New
Limited Supply: Only 1 Left!
Price: $112.01

Qty:

Description: R6 front fender for racing
Item #: Y14010AF
Condition: New
Limited Supply: Only 0 Left!
Price: $114.30

Description: ZX10r front fender for racing
Item #: K18010AF
Condition: New
Limited Supply: Only 5 Left!
Price: $120.65

Qty:

Description: Designed for the Use of making it easier to lift your fuel tank up, Cant stay connected in tank removal or can easily be taken off with 3 bolts Most Commonly used for Race bikes as this removes the need to remove side panels to get to the fuel tank bolts saving valuable time when working on the bike
• This is a 1 Piece airbox cover with the side panels built in to Replace the oem Airbox Cover and side panels
• It comes Ready to install on your Bike with Perfect Fitment
• This is Avio Fiber , Reinforced with carbon fiber
• This means it is the lightest out there saving lbs off your bike!
Item #: H16400AF
Condition: New
These are not designed to fit with any of the OEM panels
Price: $238.76

Qty:

Description: Replacement left side panel
Item #: D4231AF
Condition: New
Limited Supply: Only 1 Left!
Price: $298.45

Qty:

Description: Replacement lower fairing with Dzus
Item #: H16220AF
Condition: New
These are not designed to fit with any of the OEM panels
Price: $283.21

Qty:

Description: R1 seat for Carbonin bodywork long version covers the back of the tail

Picture is of a Customer Customers seat and is an example to show you the embroidery.
You can supply a logo or we can embroider your Name or Number on your seat. additional logos are $50 please contact us arrange an extra logo
Item #: FM1960YL
Condition: New
These are not designed to fit with any of the OEM panels
Price: $309.88

Qty:

Description: Parts Included In Complete SSP Fairing:
• Upper Race Fairing (6 Dzus)
• Lower Fairing (5 Dzus)
• Left Side Panel
• Right Side Panel
• Superbike Tail

Not included
There are 3 options for seats
• Basic - This seat is a 15mm neoprene foam glued to a base that is molded from the seat pan of the tail section and then attaches to the seat pan with bolts. Please not that these seat's will only fit carbonin seat pans and seat units. It will not work on any other brand. This foam will wear out like any other foam pad.
• Standard - This is an upgrade to the basic seat which is covered in a neoprene material that protects the basic foam and provides the rider a level of grip but without compromising the need to slide side to side. It looks much more professional and will protect the basic foam from any wear from patches on leather suits or abuse from side to side movements. we have seen these seats go on for 3 seasons or more!
• Pro Seat - This seat is for riders or teams that require their seat to provide back support or a step seat to keep them in a position from sliding too far back in the seat under acceleration, this is often done with a raised section so they can still get back in the seat in the full tuck, they are just raised up more which helps keep the butt up and their head shoulders and chest lower in the tuck. It is the same material as the standard seat but can also be customized with team logo's or race number -If you purchase a pro seat we will contact you to design your seat. Please note pro seats are made custom to order
Item #: Y12100AF
Condition: New
These are not designed to fit with any of the OEM panels
Price: $946.15


Description: Description
Parts Included In Complete Race Fairing:
• Upper Race Fairing (6 Dzus)
• Lower Fairing
• Left Side Panel (2 Dzus)
• Right Side Panel (2 Dzus)
• Single Race Seat (2 Pcs)

Basic - This seat is a 15mm neoprene foam glued to a base that is molded from the seat pan of the tail section and then attaches to the seat pan with bolts. Please not that these seat's will only fit carbonin seat pans and seat units. It will not work on any other brand. This foam will wear out like any other foam pad.
Standard - This is an upgrade to the basic seat which is covered in a neoprene material that protects the basic foam and provides the rider a level of grip but without compromising the need to slide side to side. It looks much more professional and will protect the basic foam from any wear from patches on leather suits or abuse from side to side movements. we have seen these seats go on for 3 seasons or more!
Pro Seat - This seat is for riders or teams that require their seat to provide back support or a step seat to keep them in a position from sliding too far back in the seat under acceleration, this is often done with a raised section so they can still get back in the seat in the full tuck, they are just raised up more which helps keep the butt up and their head shoulders and chest lower in the tuck. It is the same material as the standard seat but can also be customized with team logo's or race number -If you purchase a pro seat we will contact you to design your seat. Please note pro seats are made custom to order
Avio fiber replacement panel , reinforced with carbon fiber and comes with pre-installed dzus for perfect fitment. Finished in a white gelcoat.
Item #: A5100AF
Condition: New
Limited Supply: Only 0 Left!
These are not designed to fit with any of the OEM panels
Price: $938.53

Description: Parts Included with Kit
• upper race faring (4 Dzus)
• lower fairing
• left side panel with optional ecu or rectifier housing. ecu for oem placement or Race for the YEC harness which houses the regulator rectifier
• right side panel
• single race seat (3 pcs) Standard seat can be used but you need to modify the battery retention plate

*Optional Airbox Cover w/ Integrated side panels show in picture above Not included Y16425AF


There are 3 options for seats
• Basic - This seat is a 15mm neoprene foam glued to a base that is molded from the seat pan of the tail section and then attaches to the seat pan with bolts. Please not that these seat's will only fit carbonin seat pans and seat units. It will not work on any other brand. This foam will wear out like any other foam pad.
• Standard - This is an upgrade to the basic seat which is covered in a neoprene material that protects the basic foam and provides the rider a level of grip but without compromising the need to slide side to side. It looks much more professional and will protect the basic foam from any wear from patches on leather suits or abuse from side to side movements. we have seen these seats go on for 3 seasons or more!
• Pro Seat - This seat is for riders or teams that require their seat to provide back support or a step seat to keep them in a position from sliding too far back in the seat under acceleration, this is often done with a raised section so they can still get back in the seat in the full tuck, they are just raised up more which helps keep the butt up and their head shoulders and chest lower in the tuck. It is the same material as the standard seat but can also be customized with team logo's or race number -If you purchase a pro seat we will contact you to design your seat. Please note pro seats are made custom to order

Tail Light Cut Out Option - with Moto America rules requiring a rain light there is an option for the oem tail light to be used. the light hole will be cut out and the light will attach like oem fitting. There are no Provisions for headlights to work with this kit- this would require custom modification
Item #: Y16100AF
Condition: New
These are not designed to fit with any of the OEM panels
Price: $948.69


Description: Parts Included In Complete Race Fairing:
Upper Race Faring (6 Dzus) fits oem screen
Lower Fairing
Left Side Panel (2 Dzus)
Right Side Panel (4 Dzus)
Single Race Seat (2 Pcs) Seat support and Superbike tail which provides a much better riding position for the racers ergonomics
Tank Cover (Oem)
This kit utilizes the oem trim panels for the inner leg area , there are provisions for these to attach to the upper fairing and side panels
Not Included
There are 3 options for seats
• Basic - This seat is a 15mm neoprene foam glued to a base that is molded from the seat pan of the tail section and then attaches to the seat pan with bolts. Please not that these seat's will only fit carbonin seat pans and seat units. It will not work on any other brand. This foam will wear out like any other foam pad.
• Standard - This is an upgrade to the basic seat which is covered in a neoprene material that protects the basic foam and provides the rider a level of grip but without compromising the need to slide side to side. It looks much more professional and will protect the basic foam from any wear from patches on leather suits or abuse from side to side movements. we have seen these seats go on for 3 seasons or more!
• Pro Seat - This seat is for riders or teams that require their seat to provide back support or a step seat to keep them in a position from sliding too far back in the seat under acceleration, this is often done with a raised section so they can still get back in the seat in the full tuck, they are just raised up more which helps keep the butt up and their head shoulders and chest lower in the tuck. It is the same material as the standard seat but can also be customized with team logo's or race number -If you purchase a pro seat we will contact you to design your seat. Please note pro seats are made custom to order
Item #: Y17100AF
Condition: New
Limited Supply: Only 3 Left!
These are not designed to fit with any of the OEM panels
Price: $1,029.97


Description: • Upper Race Fairing (4 Dzus)
• Lower Fairing (4 Dzus)
• Left Side Panel
• Right Side Panel
• Single Race Seat (2 Pcs)
• Fuel Tank Cover (Oem; 4 Dzus]
Additional parts needed
Part needed to fit complete race fairing:
• aluminium inserts for seat unit (4 pcs)
*To Fit Seat Pan Brackets are Required

There are 3 options for seats
• Basic - This seat is a 15mm neoprene foam glued to a base that is molded from the seat pan of the tail section and then attaches to the seat pan with bolts. Please not that these seat's will only fit carbonin seat pans and seat units. It will not work on any other brand. This foam will wear out like any other foam pad.
• Standard - This is an upgrade to the basic seat which is covered in a neoprene material that protects the basic foam and provides the rider a level of grip but without compromising the need to slide side to side. It looks much more professional and will protect the basic foam from any wear from patches on leather suits or abuse from side to side movements. we have seen these seats go on for 3 seasons or more!
• Pro Seat - This seat is for riders or teams that require their seat to provide back support or a step seat to keep them in a position from sliding too far back in the seat under acceleration, this is often done with a raised section so they can still get back in the seat in the full tuck, they are just raised up more which helps keep the butt up and their head shoulders and chest lower in the tuck. It is the same material as the standard seat but can also be customized with team logo's or race number -If you purchase a pro seat we will contact you to design your seat. Please note pro seats are made custom to order
Item #: H18100AF
Condition: New
These are not designed to fit with any of the OEM panels
Price: $1,154.43


Description: Parts Included In Complete Race Fairing:
• Upper Race Fairing (6 Dzus)
• Lower Fairing (5 Dzus)
• Left Side Panel
• Right Side Panel
• Single Race Seat With Fuel Tank Panels (4 Pcs; 1 Dzus)

• Required Brackets sold separately
• Lower Fairing Brackets IN1202S
• Cnc brackets for upper side panels with Dzus ALU1202S

The 2017 GSXR1000 Bodywork was developed for use in FIM World Endurance and is available in 2 versions.
1. Full quick release (Brackets that mount to your bike which make the mounting points Hard mounted) with Dzus Plates installed
2. Hard mount tail unit (meaning bolted on) and quick release brackets with Dzus on the sides and lower fairing
3.
There are 3 options for seats
• Basic - This seat is a 15mm neoprene foam glued to a base that is molded from the seat pan of the tail section and then attaches to the seat pan with bolts. Please not that these seat's will only fit carbonin seat pans and seat units. It will not work on any other brand. This foam will wear out like any other foam pad.
• Standard - This is an upgrade to the basic seat which is covered in a neoprene material that protects the basic foam and provides the rider a level of grip but without compromising the need to slide side to side. It looks much more professional and will protect the basic foam from any wear from patches on leather suits or abuse from side to side movements. we have seen these seats go on for 3 seasons or more!
• Pro Seat - This seat is for riders or teams that require their seat to provide back support or a step seat to keep them in a position from sliding too far back in the seat under acceleration, this is often done with a raised section so they can still get back in the seat in the full tuck, they are just raised up more which helps keep the butt up and their head shoulders and chest lower in the tuck. It is the same material as the standard seat but can also be customized with team logo's or race number -If you purchase a pro seat we will contact you to design your seat. Please note pro seats are made custom to order
Item #: S12100AF
Condition: New
These are not designed to fit with any of the OEM panels
Price: $1,153.11


Description: Parts Included In Complete Race Fairing:
• Upper Race Fairing (6 Dzus)
• Lower Fairing
• Left Side Panel (3 Dzus)
• Right Side Panel (3 Dzus)
• Single Race Tail (4 Pcs)

Not included
There are 3 options for seats
• Basic - This seat is a 15mm neoprene foam glued to a base that is molded from the seat pan of the tail section and then attaches to the seat pan with bolts. Please not that these seat's will only fit carbonin seat pans and seat units. It will not work on any other brand. This foam will wear out like any other foam pad.
• Standard - This is an upgrade to the basic seat which is covered in a neoprene material that protects the basic foam and provides the rider a level of grip but without compromising the need to slide side to side. It looks much more professional and will protect the basic foam from any wear from patches on leather suits or abuse from side to side movements. we have seen these seats go on for 3 seasons or more!
• Pro Seat - This seat is for riders or teams that require their seat to provide back support or a step seat to keep them in a position from sliding too far back in the seat under acceleration, this is often done with a raised section so they can still get back in the seat in the full tuck, they are just raised up more which helps keep the butt up and their head shoulders and chest lower in the tuck. It is the same material as the standard seat but can also be customized with team logo's or race number -If you purchase a pro seat we will contact you to design your seat. Please note pro seats are made custom to order
Item #: Y19200AF
Condition: New
Limited Supply: Only 0 Left!
These are not designed to fit with any of the OEM panels
Price: $1,141.73

Description: If you are running and over sized Radiator such as the Febur/H20/Taleo then you will want to order this kit, Version 1 fits the oem radiator so would require more trimming.
Parts Included In Complete Race Fairing Version 2:
• Upper Race Fairing (6 Dzus)
• Lower Fairing (Big Radiator; 6 Dzus)
• Left Side Panel (Big Radiator)
• Right Side Panel (Big Radiator)
• Single Race Seat (3 Pcs)
Please Note that this Kit has been designed to be used with 1 of 2 bracket kits so the fairing can be mounted to the bike with Dzus fasteners.
Inox (stainless steel option)
Cnc billet option
Optional
There are 3 options for seats
• Basic - This seat is a 15mm neoprene foam glued to a base that is molded from the seat pan of the tail section and then attaches to the seat pan with bolts. Please not that these seat's will only fit carbonin seat pans and seat units. It will not work on any other brand. This foam will wear out like any other foam pad.
• Standard - This is an upgrade to the basic seat which is covered in a neoprene material that protects the basic foam and provides the rider a level of grip but without compromising the need to slide side to side. It looks much more professional and will protect the basic foam from any wear from patches on leather suits or abuse from side to side movements. we have seen these seats go on for 3 seasons or more!
• Pro Seat - This seat is for riders or teams that require their seat to provide back support or a step seat to keep them in a position from sliding too far back in the seat under acceleration, this is often done with a raised section so they can still get back in the seat in the full tuck, they are just raised up more which helps keep the butt up and their head shoulders and chest lower in the tuck. It is the same material as the standard seat but can also be customized with team logo's or race number -If you purchase a pro seat we will contact you to design your seat. Please note pro seats are made custom to order
Item #: B3101AF
Condition: New
Limited Supply: Only 1 Left!
These are not designed to fit with any of the OEM panels
Price: $979.17


Description: Parts Included In Complete Race Fairing:
• Upper Race Fairing (6 Dzus)
• Lower Fairing designed for H20 Oversized radiator
• Left Side Panel (3 Dzus) designed for H20 Oversized radiator
• Right Side Panel (3 Dzus) designed for H20 Oversized radiator
• Single Race Tail (4 Pcs)

Not included
There are 3 options for seats
• Basic - This seat is a 15mm neoprene foam glued to a base that is molded from the seat pan of the tail section and then attaches to the seat pan with bolts. Please not that these seat's will only fit carbonin seat pans and seat units. It will not work on any other brand. This foam will wear out like any other foam pad.
• Standard - This is an upgrade to the basic seat which is covered in a neoprene material that protects the basic foam and provides the rider a level of grip but without compromising the need to slide side to side. It looks much more professional and will protect the basic foam from any wear from patches on leather suits or abuse from side to side movements. we have seen these seats go on for 3 seasons or more!
• Pro Seat - This seat is for riders or teams that require their seat to provide back support or a step seat to keep them in a position from sliding too far back in the seat under acceleration, this is often done with a raised section so they can still get back in the seat in the full tuck, they are just raised up more which helps keep the butt up and their head shoulders and chest lower in the tuck. It is the same material as the standard seat but can also be customized with team logo's or race number -If you purchase a pro seat we will contact you to design your seat. Please note pro seats are made custom to order
Item #: Y192200AF
Condition: New
These are not designed to fit with any of the OEM panels
Price: $991.87


Description: Upper Race Fairing
Left Side Panel
Right Side Panel
Race Seat Unit (3 Pcs) Uses oem Seat
Parts needed to fit complete race fairing: when fitting to 1299 Panigale Aluminum dashboard stay (only required when installing to 1299) Optional for 1199 and 899
This bodywork uses the oem Dzus fasteners from oem bodywork.
This kit was designed for a 1199 and can be mounted to a 1299 with the fairing bracket and air tube however you will need to order a windshield for a 1199 Panigale
Item #: D4100AF
Condition: New
Limited Supply: Only 1 Left!
These are not designed to fit with any of the OEM panels
Price: $1,108.71


Description: Parts Included In Complete Race Fairing For Race Exhaust:
• Upper Race Fairing (6 Dzus)
• Lower Fairing (For oem Exhaust)
• Left Side Panel (3 Dzus)
• Right Side Panel (3 Dzus)
• Single Race Seat (3 Pcs)
This kit can be Fitted with a Quick release bracket option for the fairing or can simply bolt on but you must choose your selection as these kits come pre drilled for the specific mounting option

Basic - This seat is a 15mm neoprene foam glued to a base that is molded from the seat pan of the tail section and then attaches to the seat pan with bolts. Please not that these seat's will only fit carbonin seat pans and seat units. It will not work on any other brand. This foam will wear out like any other foam pad.
Standard - This is an upgrade to the basic seat which is covered in a neoprene material that protects the basic foam and provides the rider a level of grip but without compromising the need to slide side to side. It looks much more professional and will protect the basic foam from any wear from patches on leather suits or abuse from side to side movements. we have seen these seats go on for 3 seasons or more!
Pro Seat - This seat is for riders or teams that require their seat to provide back support or a step seat to keep them in a position from sliding too far back in the seat under acceleration, this is often done with a raised section so they can still get back in the seat in the full tuck, they are just raised up more which helps keep the butt up and their head shoulders and chest lower in the tuck. It is the same material as the standard seat but can also be customized with team logo's or race number -If you purchase a pro seat we will contact you to design your seat. Please note pro seats are made custom to order
Avio fiber replacement panel , reinforced with carbon fiber and comes with pre-installed dzus for perfect fitment. Finished in a white gelcoat.
Item #: B2101AF
Condition: New
These are not designed to fit with any of the OEM panels
Price: $953.77


Description: Parts Included In Complete Race Fairing:
• Upper Race Fairing (8 Dzus)
• Lower Fairing (4 Dzus)
• Left Side Panel
• Right Side Panel
• Single Race Seat (2 Pcs; 5 Dzus)
Required fitment kit to mount this fairing
• Aluminum support for side panels (2 pcs with 2 Dzus)
• air box inlet tubes

There are 3 options for seats
• Basic - This seat is a 15mm neoprene foam glued to a base that is molded from the seat pan of the tail section and then attaches to the seat pan with bolts. Please not that these seat's will only fit carbonin seat pans and seat units. It will not work on any other brand. This foam will wear out like any other foam pad.
• Standard - This is an upgrade to the basic seat which is covered in a neoprene material that protects the basic foam and provides the rider a level of grip but without compromising the need to slide side to side. It looks much more professional and will protect the basic foam from any wear from patches on leather suits or abuse from side to side movements. we have seen these seats go on for 3 seasons or more!
• Pro Seat - This seat is for riders or teams that require their seat to provide back support or a step seat to keep them in a position from sliding too far back in the seat under acceleration, this is often done with a raised section so they can still get back in the seat in the full tuck, they are just raised up more which helps keep the butt up and their head shoulders and chest lower in the tuck. It is the same material as the standard seat but can also be customized with team logo's or race number -If you purchase a pro seat we will contact you to design your seat. Please note pro seats are made custom to order"
Item #: MV2101AF
Condition: New
These are not designed to fit with any of the OEM panels
Price: $1,068.07


Description: Parts Included In Complete Ssp1 Fairing:
• SSP1 Supersport Upper Fairing- uses larger air intake
• Lower Fairing (4 Dzus)
• Single Race Seat For Gps Unit
• Fuel Tank Cover (Oem; 6 Dzus)

Options
There are 3 options for seats
• Basic - This seat is a 15mm neoprene foam glued to a base that is molded from the seat pan of the tail section and then attaches to the seat pan with bolts. Please not that these seat's will only fit carbonin seat pans and seat units. It will not work on any other brand. This foam will wear out like any other foam pad.
• Standard - This is an upgrade to the basic seat which is covered in a neoprene material that protects the basic foam and provides the rider a level of grip but without compromising the need to slide side to side. It looks much more professional and will protect the basic foam from any wear from patches on leather suits or abuse from side to side movements. we have seen these seats go on for 3 seasons or more!
• Pro Seat - This seat is for riders or teams that require their seat to provide back support or a step seat to keep them in a position from sliding too far back in the seat under acceleration, this is often done with a raised section so they can still get back in the seat in the full tuck, they are just raised up more which helps keep the butt up and their head shoulders and chest lower in the tuck. It is the same material as the standard seat but can also be customized with team logo's or race number -If you purchase a pro seat we will contact you to design your seat. Please note pro seats are made custom to order
Item #: H16102AF
Condition: New
Limited Supply: Only 1 Left!
These are not designed to fit with any of the OEM panels
Price: $1,139.19


Description: S1000rr rear fender in avio fiber
Item #: B4020AF
Condition: New
Price: $125.73

Qty:

Description: Replacement Right side panel
Item #: D4232AF
Condition: New
Limited Supply: Only 1 Left!
Price: $298.45

Qty:

Description: Replacement winglet for carbonin tail unit
Item #: Y19312AF
Condition: New
Price: $76.28

Qty:

Description: Replacement winglet for carbonin tail unit
Item #: Y19311AF
Condition: New
Price: $76.28

Qty:

Description: R1 seat for Carbonin bodywork long version covers the back of the tail

Pictures are shown for reference only and may not accurately represent the exact model of your seat
Item #: FM1950YL
Condition: New
These are not designed to fit with any of the OEM panels
Price: $227.33

Qty:

Description: Replacement Superbike Tail unit
Item #: K18300AF
Condition: New
Limited Supply: Only 0 Left!
These are not designed to fit with any of the OEM panels
Price: $290.82

Description: 3 piece tail unit *requires bracket IN4114D for installation
Item #: D4300AF
Condition: New
Limited Supply: Only 1 Left!
These are not designed to fit with any of the OEM panels
Price: $284.48


Description: Replacement tail unit
Item #: H16302AF
Condition: New
These are not designed to fit with any of the OEM panels
Price: $264.16


Description: Replacement upper fairing pre drilled
Item #: H16212AF
Condition: New
These are not designed to fit with any of the OEM panels
Price: $328.93


Description: Replacement Upper Fairing
Item #: D4210AF
Condition: New
Limited Supply: Only 1 Left!
These are not designed to fit with any of the OEM panels
Price: $292.10

Qty:

Description: R1 seat for Carbonin bodywork long version covers the back of the tail

Pictures are shown for reference only and may not accurately represent the exact model of your seat
Item #: FM1910YL
Condition: New
These are not designed to fit with any of the OEM panels
Price: $129.92

Qty:

Description: Carbonin Basic Seat Foam 2018-2020 Kawasaki ZX-400 Ninja FM1910K
Made to fit only Carbonin Bodywork
Item #: FM1910K
Condition: New
Limited Supply: Only 1 Left!
These are not designed to fit with any of the OEM panels
Price: $112.00

Qty:

Description: Lightweight Carbon fender Oem Replacement
Item #: CK18010
Condition: New
Price: $224.79

Qty:

Description: Lightweight Carbon fender Oem Replacement
Item #: CS12010
Condition: New
Limited Supply: Only 3 Left!
Price: $194.31

Qty:

Description: Lightweight Carbon fender Oem Replacement
Item #: CB4010
Condition: New
Limited Supply: Only 3 Left!
Price: $248.41

Qty:

Description: Parts Included In Complete Race Fairing:
Upper Race Fairing (6 Dzus)
Lower Fairing
Left Side Panel (2 Dzus)
Right Side Panel (2 Dzus)
Single Race Seat (2 Pcs) There are 3 options for seats
• Basic - This seat is a 15mm neoprene foam glued to a base that is molded from the seat pan of the tail section and then attaches to the seat pan with bolts. Please not that these seat's will only fit carbonin seat pans and seat units. It will not work on any other brand. This foam will wear out like any other foam pad.
• Standard - This is an upgrade to the basic seat which is covered in a neoprene material that protects the basic foam and provides the rider a level of grip but without compromising the need to slide side to side. It looks much more professional and will protect the basic foam from any wear from patches on leather suits or abuse from side to side movements. we have seen these seats go on for 3 seasons or more!
• Pro Seat - This seat is for riders or teams that require their seat to provide back support or a step seat to keep them in a position from sliding too far back in the seat under acceleration, this is often done with a raised section so they can still get back in the seat in the full tuck, they are just raised up more which helps keep the butt up and their head shoulders and chest lower in the tuck. It is the same material as the standard seat but can also be customized with team logo's or race number -If you purchase a pro seat we will contact you to design your seat. Please note pro seats are made custom to order
Item #: CA5100
Condition: New
These are not designed to fit with any of the OEM panels
Price: $1,967.23


Description: Parts Included In Complete Race Faring:
• Upper Race Fairing (8 Dzus)
• Lower Fairing (4 Dzus)
• Left Side Panel
• Right Side Panel
• Single Race Seat (3 Pcs)

There are 3 options for seats

Basic - This seat is a 15mm neoprene foam glued to a base that is molded from the seat pan of the tail section and then attaches to the seat pan with bolts. Please not that these seat's will only fit carbonin seat pans and seat units. It will not work on any other brand. This foam will wear out like any other foam pad.
Standard - This is an upgrade to the basic seat which is covered in a neoprene material that protects the basic foam and provides the rider a level of grip but without compromising the need to slide side to side. It looks much more professional and will protect the basic foam from any wear from patches on leather suits or abuse from side to side movements. we have seen these seats go on for 3 seasons or more!
Pro Seat - This seat is for riders or teams that require their seat to provide back support or a step seat to keep them in a position from sliding too far back in the seat under acceleration, this is often done with a raised section so they can still get back in the seat in the full tuck, they are just raised up more which helps keep the butt up and their head shoulders and chest lower in the tuck. It is the same material as the standard seat but can also be customized with team logo's or race number -If you purchase a pro seat we will contact you to design your seat. Please note pro seats are made custom to order
Item #: CY14100
Condition: New
These are not designed to fit with any of the OEM panels
Price: $1,931.67


Items 1-60 of 917

More About Carbonin

Carbonin are unlike any other bodywork manufacture In the market today! They provide a professional race service by offering full paint & graphics right out of the box  made to order avio fiber & carbon fiber bodywork kits known for their perfect fitment and quality.

These fairings are ready to take out of the box and Install, They come Pre fitted with Dzus fasteners & have a choice of seats with different covering or customization for your needs unlike other manufacture's

Hand made In Europe & used by many teams In professional racing around the world from World SBK ,BSB ,IDM ,FIM World Endurance Championship & Moto America!

They have a unique product that Is taking over the market & setting standards

Introducing Avio Fiber which Is an aviation grade cloth used with epoxy resin which Is an alternative to GFK fiber glass fairings because It Is lighter, flexible & stronger.

This Bodywork Will Out Perform & Outlast Its Competition!