STX 22 Cartridge Kit MX & Enduro FCX 101-20

These kits are designed based on the Öhlins TTX22 cartridge kit for the bigger bikes and share a lot of the features with these kits and the experience it has from top level racing around the world. As such it’s one of the most powerful cartridge kits available for 85cc bikes.

This kit has been designed to rise very low above the fork leg ends, thus allowing the forks to be mounted far up in the triple clamps with a small clearance to the handlebars. This allows for lower bikes for the smaller riders in the class. Click adjusters and air breather are easily reachable as they are angled out from underneath the handlebar.

The kit is also designed to achieve a quick and continuous response in the damping which directly slows down upcoming motions without harshness. It has a very reliable and constant damping characteristic in every stroke and during the whole race so the behavior is predictable and consistent.

Part number

Type Code

Technical data

Notes

Front fork springs need to be ordered separately. It is recommended to contact an Öhlins Service Center for installation.

Fits for vehicles

• KTM 85 SX (2018 – 2020)

  • Without "Teilegutachten" (Germany)
  • Racing product, not for use on public roads

• Husqvarna TC 85 (2018 – 2020)

  • Without "Teilegutachten" (Germany)
  • Racing product, not for use on public roads

STX 22 Cartridge Kit MX & Enduro FCX 102 -20

These kits are designed based on the Öhlins TTX22 cartridge kit for the bigger bikes and share a lot of the features with these kits and the experience it has from top level racing around the world. As such it’s one of the most powerful cartridge kits available for 85cc bikes.

This kit has been designed to rise very low above the fork leg ends, thus allowing the forks to be mounted far up in the triple clamps with a small clearance to the handlebars. This allows for lower bikes for the smaller riders in the class. Click adjusters and air breather are easily reachable as they are angled out from underneath the handlebar.

The kit is also designed to achieve a quick and continuous response in the damping which directly slows down upcoming motions without harshness. It has a very reliable and constant damping characteristic in every stroke and during the whole race so the behavior is predictable and consistent.

Part number

Type Code

Technical data

Notes

Front fork springs need to be ordered separately. It is recommended to contact an Öhlins Service Center for installation.

Fits for vehicles

• KTM 85 SX (2018 – 2020)

  • Without "Teilegutachten" (Germany)
  • Racing product, not for use on public roads

• Husqvarna TC 85 (2018 – 2020)

  • Without "Teilegutachten" (Germany)
  • Racing product, not for use on public roads

NIX 30 Cartridge Kit FGK 202

Our 30 mm front fork cartridge kit is based on experience gained from international Supersport and Superstock championships. It doesn’t matter if you are heading for a national road racing title or if you are taking your bike to the local race track. The cartridge kit will give you loads of performance, stable damping characteristics and fantastic comfort.

The kit has a unique design with compression damping and the adjustment on the left leg and rebound damping
and the adjustment on the right leg – i.e. all adjustments are made at the top together with the spring preload!
The cartridge kit system fits bolt on in most standard hyper sport front forks.

Part number

Type Code

Technical data

Notes

It is recommended to contact an authorised ÖHLINS Service Center for installation.

Fits for vehicles

• Yamaha YZF-R6 (2008 – 2015)

  • Teilegutachten (Germany)
  • "ABE" in preparation (Germany)

NIX 30 Cartridge Kit FGK 203

Our 30 mm front fork cartridge kit is based on experience gained from international Supersport and Superstock championships. It doesn’t matter if you are heading for a national road racing title or if you are taking your bike to the local race track. The cartridge kit will give you loads of performance, stable damping characteristics and fantastic comfort.

The kit has a unique design with compression damping and the adjustment on the left leg and rebound damping
and the adjustment on the right leg – i.e. all adjustments are made at the top together with the spring preload!
The cartridge kit system fits bolt on in most standard hyper sport front forks.

Part number

Type Code

Technical data

Notes

For models with and without ABS. It is recommended to contact an authorised ÖHLINS Service Center for installation.

Fits for vehicles

• Honda CBR1000RR (2008 – 2011)

  • Teilegutachten (Germany)
  • "ABE" in preparation (Germany)
  • For both models with and without ABS.

NIX 30 Cartridge Kit FGK 206

Our 30 mm front fork cartridge kit is based on experience gained from international Supersport and Superstock championships. It doesn’t matter if you are heading for a national road racing title or if you are taking your bike to the local race track. The cartridge kit will give you loads of performance, stable damping characteristics and fantastic comfort.

The kit has a unique design with compression damping and the adjustment on the left leg and rebound damping
and the adjustment on the right leg – i.e. all adjustments are made at the top together with the spring preload!
The cartridge kit system fits bolt on in most standard hyper sport front forks.

Part number

Type Code

Technical data

Notes

It is recommended to contact an authorised ÖHLINS Service Center for installation.

Fits for vehicles

• Kawasaki Ninja ZX-6R (2009 – 2016)

  • Teilegutachten (Germany)

NIX 30 Cartridge Kit FGK 208

Our 30 mm front fork cartridge kit is based on experience gained from international Supersport and Superstock championships. It doesn’t matter if you are heading for a national road racing title or if you are taking your bike to the local race track. The cartridge kit will give you loads of performance, stable damping characteristics and fantastic comfort.

The kit has a unique design with compression damping and the adjustment on the left leg and rebound damping
and the adjustment on the right leg – i.e. all adjustments are made at the top together with the spring preload!
The cartridge kit system fits bolt on in most standard hyper sport front forks.

Part number

Type Code

Technical data

Notes

It is recommended to contact an authorised ÖHLINS Service Center for installation.

Fits for vehicles

• Suzuki GSX-R600 (2006 – 2010)

  • Teilegutachten (Germany)
  • "ABE" in preparation (Germany)

• Suzuki GSX-R750 (2006 – 2007)

  • Teilegutachten (Germany)
  • "ABE" in preparation (Germany)

NIX 30 Cartridge Kit FGK 212

Our 30 mm front fork cartridge kit is based on experience gained from international Supersport and Superstock championships. It doesn’t matter if you are heading for a national road racing title or if you are taking your bike to the local race track. The cartridge kit will give you loads of performance, stable damping characteristics and fantastic comfort.

The kit has a unique design with compression damping and the adjustment on the left leg and rebound damping
and the adjustment on the right leg – i.e. all adjustments are made at the top together with the spring preload!
The cartridge kit system fits bolt on in most standard hyper sport front forks.

Part number

Type Code

Technical data

Notes

On DDC equipped bikes only to be used with Öhlins shock absorber
It is recommended to contact an authorised ÖHLINS Service Center for installation.

Fits for vehicles

• BMW S 1000 RR (2008 – 2016)

  • ABE (Germany)

• BMW S 1000 RR (2017 – 2018)

  • ABE (Germany)

• BMW S 1000 RR HP4 (2013 – 2014)

  • ABE (Germany)

NIX 30 Cartridge Kit FGK 216

Our 30 mm front fork cartridge kit is based on experience gained from international Supersport and Superstock championships. It doesn’t matter if you are heading for a national road racing title or if you are taking your bike to the local race track. The cartridge kit will give you loads of performance, stable damping characteristics and fantastic comfort.

The kit has a unique design with compression damping and the adjustment on the left leg and rebound damping
and the adjustment on the right leg – i.e. all adjustments are made at the top together with the spring preload!
The cartridge kit system fits bolt on in most standard hyper sport front forks.

Part number

Type Code

Technical data

Notes

It is recommended to contact an authorised ÖHLINS Service Center for installation.

Fits for vehicles

• Kawasaki Ninja ZX-10R (2011 – 2015)

  • Teilegutachten (Germany)

NIX 30 Cartridge Kit FGK 221

Our 30 mm front fork cartridge kit is based on experience gained from international Supersport and Superstock championships. It doesn’t matter if you are heading for a national road racing title or if you are taking your bike to the local race track. The cartridge kit will give you loads of performance, stable damping characteristics and fantastic comfort.

The kit has a unique design with compression damping and the adjustment on the left leg and rebound damping
and the adjustment on the right leg – i.e. all adjustments are made at the top together with the spring preload!
The cartridge kit system fits bolt on in most standard hyper sport front forks.

Part number

Type Code

Technical data

Notes

It is recommended to contact an authorised ÖHLINS Service Center for installation.

Fits for vehicles

• Suzuki GSX-R 1000 (2012 – 2016)

  • Teilegutachten (Germany)

• Suzuki GSX-R 1000 (2017 – 2019)

  • Without "Teilegutachten" (Germany)

NIX 30 Cartridge Kit FGK 226

Our 30 mm front fork cartridge kit is based on experience gained from international Supersport and Superstock championships. It doesn’t matter if you are heading for a national road racing title or if you are taking your bike to the local race track. The cartridge kit will give you loads of performance, stable damping characteristics and fantastic comfort.

The kit has a unique design with compression damping and the adjustment on the left leg and rebound damping
and the adjustment on the right leg – i.e. all adjustments are made at the top together with the spring preload!
The cartridge kit system fits bolt on in most standard hyper sport front forks.

Part number

Type Code

Technical data

Notes

For Showa Front Forks.
Springs are not part of the kit and have to be ordered seperately. It is recommended to contact an authorised ÖHLINS Service Center for installation.

Fits for vehicles

• Honda CBR600RR (2013 – 2016)

  • Teilegutachten (Germany)

• Honda CBR600RR (2017 – 2018)

  • Without "Teilegutachten" (Germany)

NIX 30 Cartridge Kit FGK 229

Our 30 mm front fork cartridge kit is based on experience gained from international Supersport and Superstock championships. It doesn’t matter if you are heading for a national road racing title or if you are taking your bike to the local race track. The cartridge kit will give you loads of performance, stable damping characteristics and fantastic comfort.

The kit has a unique design with compression damping and the adjustment on the left leg and rebound damping
and the adjustment on the right leg – i.e. all adjustments are made at the top together with the spring preload!
The cartridge kit system fits bolt on in most standard hyper sport front forks.

Part number

Type Code

Technical data

Notes

It is recommended to contact an authorised ÖHLINS Service Center for installation.

Fits for vehicles

• Ducati 899 Panigale (2014 – 2015)

  • Teilegutachten (Germany)

• Ducati 959 Panigale (2016 – 2019)

  • "ABE" in preparation (Germany)

• Ducati Panigale V2 (2020 – )

  • "ABE" in preparation (Germany)

• Ducati Panigale V4 (2018 – 2020)

  • "ABE" in preparation (Germany)

NIX 30 Cartridge Kit FGK 234

Our 30 mm front fork cartridge kit is based on experience gained from international Supersport and Superstock championships. It doesn’t matter if you are heading for a national road racing title or if you are taking your bike to the local race track. The cartridge kit will give you loads of performance, stable damping characteristics and fantastic comfort.

The kit has a unique design with compression damping and the adjustment on the left leg and rebound damping
and the adjustment on the right leg – i.e. all adjustments are made at the top together with the spring preload!
The cartridge kit system fits bolt on in most standard hyper sport front forks.

Part number

Type Code

Technical data

Notes

Will only fit for Yamaha YZF R1M with ÖHLINS front fork. Electronically controlled damping function will be deactivated! It is recommended to contact an authorised ÖHLINS Service Center for installation.

Fits for vehicles

• Yamaha YZF-R1M (2015 – 2019)

  • "ABE" in preparation (Germany)

NIX 30 Cartridge Kit FGK 236

Our 30 mm front fork cartridge kit is based on experience gained from international Supersport and Superstock championships. It doesn’t matter if you are heading for a national road racing title or if you are taking your bike to the local race track. The cartridge kit will give you loads of performance, stable damping characteristics and fantastic comfort.

The kit has a unique design with compression damping and the adjustment on the left leg and rebound damping
and the adjustment on the right leg – i.e. all adjustments are made at the top together with the spring preload!
The cartridge kit system fits bolt on in most standard hyper sport front forks.

Part number

Technical data

Notes

Only fits the Sachs OE fork, not the OE Marzocchi fork! Not suitable for ESA equipped bikes.
It is recommended to contact an ÖHLINS Service Center for installation.

Fits for vehicles

• BMW R 1200 R (2015 – 2016)

  • "Teilegutachten" in preparation (Germany)

• BMW R 1200 R (2017 – 2018)

  • ABE (Germany)

• BMW R 1200 RS (2015 – 2016)

  • "Teilegutachten" in preparation (Germany)

• BMW R 1200 RS (2017 – 2018)

  • ABE (Germany)

NIX 30 Cartridge Kit FGK 238

Our 30 mm front fork cartridge kit is based on experience gained from international Supersport and Superstock championships. It doesn’t matter if you are heading for a national road racing title or if you are taking your bike to the local race track. The cartridge kit will give you loads of performance, stable damping characteristics and fantastic comfort.

The kit has a unique design with compression damping and the adjustment on the left leg and rebound damping
and the adjustment on the right leg – i.e. all adjustments are made at the top together with the spring preload!
The cartridge kit system fits bolt on in most standard hyper sport front forks.

Part number

Type Code

Technical data

Notes

It is recommended to contact an authorised ÖHLINS Service Center for installation.

Fits for vehicles

• Yamaha YZF-R6 (2016)

  • Teilegutachten (Germany)
  • "ABE" in preparation (Germany)

FKR Cartridge Kit Racing (TTX 25) FKR 103

The racing inspired FKR cartridge kit has technology derived straight from the Moto3, Moto 2 and World Superbike championships developed by our engineers in Sweden and is designed for high end racing.

The FKR Cartridge kit features a spring pressurized system, compared to the old gas pressurized system, the spring pressure offers a more simplistic and user friendly design that also accounts for easier maintenance. But there are more advantages of a spring pressurized system. There is no risk of gas leakage, it also gives a more consistent performance curve and allows for a more compact design. With the Öhlins TTX technology, a new designed piston and an 8mm piston shaft we reduce the pressure build-up and create a faster damping response. That gives a “linear” style of damping characteristics which create more tuning options and also increases grip and bump absorption properties while improving chassis stability.

Part number

Type Code

Technical data

Notes

Fits models with Öhlins fork FL 912! It is recommended to contact an authorised ÖHLINS Service Center for installation.

Fits for vehicles

• Yamaha YZF-R1M (2015 – 2019)

  • Without "Teilegutachten" (Germany)
  • Racing product, not for use on public roads
  • Fits OEM Öhlins FL 912 fork

FKR Cartridge Kit Racing (TTX 25) FKR 104

The racing inspired FKR cartridge kit has technology derived straight from the Moto3, Moto 2 and World Superbike championships developed by our engineers in Sweden and is designed for high end racing.

The FKR Cartridge kit features a spring pressurized system, compared to the old gas pressurized system, the spring pressure offers a more simplistic and user friendly design that also accounts for easier maintenance. But there are more advantages of a spring pressurized system. There is no risk of gas leakage, it also gives a more consistent performance curve and allows for a more compact design. With the Öhlins TTX technology, a new designed piston and an 8mm piston shaft we reduce the pressure build-up and create a faster damping response. That gives a “linear” style of damping characteristics which create more tuning options and also increases grip and bump absorption properties while improving chassis stability.

Part number

Type Code

Technical data

Notes

It is recommended to contact an authorised ÖHLINS Service Center for installation.

Fits for vehicles

• BMW S 1000 RR (2008 – 2018)

  • Racing product, not for use on public roads

• BMW S 1000 RR HP4 (2013 – 2014)

  • Racing product, not for use on public roads

FKR Cartridge Kit Racing (TTX 25) FKR 106

The racing inspired FKR cartridge kit has technology derived straight from the Moto3, Moto 2 and World Superbike championships developed by our engineers in Sweden and is designed for high end racing.

The FKR Cartridge kit features a spring pressurized system, compared to the old gas pressurized system, the spring pressure offers a more simplistic and user friendly design that also accounts for easier maintenance. But there are more advantages of a spring pressurized system. There is no risk of gas leakage, it also gives a more consistent performance curve and allows for a more compact design. With the Öhlins TTX technology, a new designed piston and an 8mm piston shaft we reduce the pressure build-up and create a faster damping response. That gives a “linear” style of damping characteristics which create more tuning options and also increases grip and bump absorption properties while improving chassis stability.

Part number

Type Code

Technical data

Notes

Fits models with Kayaba OEM fork!
It is recommended to contact an authorised ÖHLINS Service Center for installation.

Fits for vehicles

• Yamaha YZF-R6 (2016)

  • Racing product, not for use on public roads

FKR Cartridge Kit Racing (TTX 25) FKR 107

The racing inspired FKR cartridge kit has technology derived straight from the Moto3, Moto 2 and World Superbike championships developed by our engineers in Sweden and is designed for high end racing.

The FKR Cartridge kit features a spring pressurized system, compared to the old gas pressurized system, the spring pressure offers a more simplistic and user friendly design that also accounts for easier maintenance. But there are more advantages of a spring pressurized system. There is no risk of gas leakage, it also gives a more consistent performance curve and allows for a more compact design. With the Öhlins TTX technology, a new designed piston and an 8mm piston shaft we reduce the pressure build-up and create a faster damping response. That gives a “linear” style of damping characteristics which create more tuning options and also increases grip and bump absorption properties while improving chassis stability.

Part number

Type Code

Technical data

Notes

Comes with 3 different spring rates: 9, 9.5 & 10N/mm.
It is recommended to contact an authorised ÖHLINS Service Center for installation.

Fits for vehicles

• Kawasaki Ninja ZX-6R (2009 – 2016)

  • Racing product, not for use on public roads

FKR Cartridge Kit Racing (TTX 25) FKR 112

The racing inspired FKR cartridge kit has technology derived straight from the Moto3, Moto 2 and World Superbike championships developed by our engineers in Sweden and is designed for high end racing.

The FKR Cartridge kit features a spring pressurized system, compared to the old gas pressurized system, the spring pressure offers a more simplistic and user friendly design that also accounts for easier maintenance. But there are more advantages of a spring pressurized system. There is no risk of gas leakage, it also gives a more consistent performance curve and allows for a more compact design. With the Öhlins TTX technology, a new designed piston and an 8mm piston shaft we reduce the pressure build-up and create a faster damping response. That gives a “linear” style of damping characteristics which create more tuning options and also increases grip and bump absorption properties while improving chassis stability.

Part number

Type Code

Technical data

Notes

It is recommended to contact an authorised ÖHLINS Service Center for installation.

Fits for vehicles

• Yamaha YZF-R6 (2008 – 2015)

  • Racing product, not for use on public roads

FKR Cartridge Kit Racing (TTX 25) FKR 117

The racing inspired FKR cartridge kit has technology derived straight from the Moto3, Moto 2 and World Superbike championships developed by our engineers in Sweden and is designed for high end racing.

The FKR Cartridge kit features a spring pressurized system, compared to the old gas pressurized system, the spring pressure offers a more simplistic and user friendly design that also accounts for easier maintenance. But there are more advantages of a spring pressurized system. There is no risk of gas leakage, it also gives a more consistent performance curve and allows for a more compact design. With the Öhlins TTX technology, a new designed piston and an 8mm piston shaft we reduce the pressure build-up and create a faster damping response. That gives a “linear” style of damping characteristics which create more tuning options and also increases grip and bump absorption properties while improving chassis stability.

Part number

Type Code

Technical data

Notes

For models with Marzocchi fork.
3x different spring rates (9.0, 9.5 & 10.0 N/mm) included.
It is recommended to contact an authorised ÖHLINS Service Center for installation. Race Track use only.

Fits for vehicles

• MV Agusta F3 (2014 – 2018)

  • Racing product, not for use on public roads

FKR Cartridge Kit Racing (TTX 25) FKR 122

The racing inspired FKR cartridge kit has technology derived straight from the Moto3, Moto 2 and World Superbike championships developed by our engineers in Sweden and is designed for high end racing.

The FKR Cartridge kit features a spring pressurized system, compared to the old gas pressurized system, the spring pressure offers a more simplistic and user friendly design that also accounts for easier maintenance. But there are more advantages of a spring pressurized system. There is no risk of gas leakage, it also gives a more consistent performance curve and allows for a more compact design. With the Öhlins TTX technology, a new designed piston and an 8mm piston shaft we reduce the pressure build-up and create a faster damping response. That gives a “linear” style of damping characteristics which create more tuning options and also increases grip and bump absorption properties while improving chassis stability.

Part number

Type Code

Technical data

Notes

It is recommended to contact an authorised ÖHLINS Service Center for installation.

Fits for vehicles

• BMW S 1000 RR (2019 – 2020)

  • Without "Teilegutachten" (Germany)
  • Racing product, not for use on public roads

FKR Cartridge Kit Racing (TTX 25) FKR 123

The racing inspired FKR cartridge kit has technology derived straight from the Moto3, Moto 2 and World Superbike championships developed by our engineers in Sweden and is designed for high end racing.

The FKR Cartridge kit features a spring pressurized system, compared to the old gas pressurized system, the spring pressure offers a more simplistic and user friendly design that also accounts for easier maintenance. But there are more advantages of a spring pressurized system. There is no risk of gas leakage, it also gives a more consistent performance curve and allows for a more compact design. With the Öhlins TTX technology, a new designed piston and an 8mm piston shaft we reduce the pressure build-up and create a faster damping response. That gives a “linear” style of damping characteristics which create more tuning options and also increases grip and bump absorption properties while improving chassis stability.

Part number

Type Code

Notes

It is recommended to contact an authorised ÖHLINS Service Center for installation.

Fits for vehicles

• Kawasaki Ninja ZX-6R 636 (2013 – 2019)

  • Without "Teilegutachten" (Germany)
  • Racing product, not for use on public roads

NIX 22 Cartridge Kit FKS 201

Öhlins cartridge kits are based on our experience learned through decades of testing and racing in high tier championships. Our cartridge kits deliver loads of performance together with stable damping characteristics while ensuring great comfort and contributing to rider confidence. With the NIX22 cartridge kits this now available for motorcycles with conventional front forks.

Each Öhlins cartridge kit has been tested extensively and tailor made to suit the individual requirements and characteristics for each individual bike. In combination with the well proven “NIX” design which features compression damping in the left leg and rebound damping in the right leg, it allows for a more precise function and stability. All adjustments including spring preload are made at the top cap.

The cartridge system fits into the original front fork, springs have to be ordered individually - please follow our recommendations regarding spring rates in relation to rider's weight.

Part number

Type Code

Technical data

Notes

Springs are not included in the kit and have to be ordered individually.
It is recommended to contact an ÖHLINS Service Center for installation.

Fits for vehicles

• Honda CBR250R (2011 – 2016)

  • Teilegutachten (Germany)

• Honda CBR300R (2015 – 2016)

  • Teilegutachten (Germany)

NIX 22 Cartridge Kit FKS 204

Öhlins cartridge kits are based on our experience learned through decades of testing and racing in high tier championships. Our cartridge kits deliver loads of performance together with stable damping characteristics while ensuring great comfort and contributing to rider confidence. With the NIX22 cartridge kits this now available for motorcycles with conventional front forks.

Each Öhlins cartridge kit has been tested extensively and tailor made to suit the individual requirements and characteristics for each individual bike. In combination with the well proven “NIX” design which features compression damping in the left leg and rebound damping in the right leg, it allows for a more precise function and stability. All adjustments including spring preload are made at the top cap.

The cartridge system fits into the original front fork, springs have to be ordered individually - please follow our recommendations regarding spring rates in relation to rider's weight.

Part number

Type Code

Technical data

Notes

Springs are not included in the kit and have to be ordered individually.
It is recommended to contact an ÖHLINS Service Center for installation.

Fits for vehicles

• Yamaha MT-07 (2014 – 2020)

  • Teilegutachten (Germany)

• Yamaha Tracer 700 (2016 – 2019)

  • Teilegutachten (Germany)

• Yamaha XSR700 (2016 – 2020)

  • Teilegutachten (Germany)

NIX 22 Cartridge Kit FKS 224

Öhlins cartridge kits are based on our experience learned through decades of testing and racing in high tier championships. Our cartridge kits deliver loads of performance together with stable damping characteristics while ensuring great comfort and contributing to rider confidence. With the NIX22 cartridge kits this now available for motorcycles with conventional front forks.

Each Öhlins cartridge kit has been tested extensively and tailor made to suit the individual requirements and characteristics for each individual bike. In combination with the well proven “NIX” design which features compression damping in the left leg and rebound damping in the right leg, it allows for a more precise function and stability. All adjustments including spring preload are made at the top cap.

The cartridge system fits into the original front fork, springs have to be ordered individually - please follow our recommendations regarding spring rates in relation to rider's weight.

Part number

Type Code

Technical data

Notes

Springs are not included in the kit and have to be ordered individually.
It is recommended to contact an ÖHLINS Service Center for installation.

Fits for vehicles

• Kawasaki Ninja 400 (2018 – 2019)

  • Without "Teilegutachten" (Germany)

NIX 22 Cartridge Kit FKS 225

Öhlins cartridge kits are based on our experience learned through decades of testing and racing in high tier championships. Our cartridge kits deliver loads of performance together with stable damping characteristics while ensuring great comfort and contributing to rider confidence. With the NIX22 cartridge kits this now available for motorcycles with conventional front forks.

Each Öhlins cartridge kit has been tested extensively and tailor made to suit the individual requirements and characteristics for each individual bike. In combination with the well proven “NIX” design which features compression damping in the left leg and rebound damping in the right leg, it allows for a more precise function and stability. All adjustments including spring preload are made at the top cap.

The cartridge system fits into the original front fork, springs have to be ordered individually - please follow our recommendations regarding spring rates in relation to rider's weight.

Part number

Type Code

Technical data

Notes

Springs are not included in the kit and have to be ordered individually.
It is recommended to contact an ÖHLINS Service Center for installation.

Fits for vehicles

• Honda CB500R (2017 – 2018)

  • Without "Teilegutachten" (Germany)