FKR Cartridge Kit Racing (TTX 25) FKR 105 Comes with 3 different spring rates: 9.5 ,10 & 10.5N/mm. The racing inspired FKR cartridge kit has technology derived straight from the Moto3, Mot...
Comes with 3 different spring rates: 9.5 ,10 & 10.5N/mm.
The racing inspired FKR cartridge kit has technology derived straight from the Moto3, Moto 2 and World Superbike championships developed by our engineers in Sweden and is designed for high end racing.
The FKR Cartridge kit features a spring pressurized system, compared to the old gas pressurized system, the spring pressure offers a more simplistic and user friendly design that also accounts for easier maintenance. But there are more advantages of a spring pressurized system. There is no risk of gas leakage, it also gives a more consistent performance curve and allows for a more compact design. With the Öhlins TTX technology, a new designed piston and an 8mm piston shaft we reduce the pressure build-up and create a faster damping response. That gives a “linear” style of damping characteristics which create more tuning options and also increases grip and bump absorption properties while improving chassis stability.
Part number
FKR 105
Type Code
TTX25 Cartridge Kit FKR
Technical data
Spring series:
04744-Serie
Packaging included:
springs 9.5, 10.0 % 10.5N/mm
Notes
Not for 2018/19 SE (Semi-active) Version.
Comes with 3 different spring rates: 9.5 ,10 & 10.5N/mm.
It is recommended to contact an authorised ÖHLINS Service Center for installation.
On-hand inventory ships within 24 hours. Please note supply-chain related delays are possible. Please contact us for ETA
Price: $2,299.00
ROTOBOX BOOST Front KAWASAKI ZX10R 2016+New
Rotobox BOOST Front Wheel
The new and improved model BOOST carbon fiber wheel from Rotobox, decreasing the weight from the RBX2 with improved design and higher performance! Comes in gloss and ma...
The new and improved model BOOST carbon fiber wheel from Rotobox, decreasing the weight from the RBX2 with improved design and higher performance! Comes in gloss and matte finish, in both symmetric and convex designs.
Like the RBX2, the BOOST is produced using Rotobox's unique 3-component composite - combining carbon, epoxy and stainless steel. By integrating the stainless 2,5 mm steel wire in each side of the rim, we increase its impact resistance at the most critical outer part. JWL and DOT approved, having met JASO T203-85 safety standards.
Another hidden BOOST gem - the Structural Rib. Thanks to the High Pressure Core Technology the structural rib is placed in the inner side between the spokes, with its mission to support the stress hot spot of the wheel. As a result the BOOST elegant spoke design brings greater stiffness and although the spokes are thinner the BOOST is stronger than ever - with a permissible static load of 280 kg on the rear and 180kg on the front wheel.
ASSEMBLING COMPONENTS
Carbon fiber composite rim, a one-piece hollow carbon cast, reinforced with stainless steel wire and UV protected; 7075 T6 aluminum alloy hubs, spacers and sprocket carrier [only with rear symmetric wheel]. machined from solid and hard anodized; polyurethane cushion drive set; SKF bearings; aluminum valve stem.
PRODUCT QUALITY CONTROL
Your Rotobox wheel has its own Serial Number to track the production history. We confirm to have performed quality verification procedure of your Rotobox wheel.
SIZE
17" x 3.5"
WEIGHT
REAR WHEEL WEIGHT 2.58 kg / 5.68 LBS
MAX. STATIC LOAD
REAR 180 kg / 400 LBS
MAX. OPERATING TEMPERATURE
100 C / 212 F
MAX. PRESSURE
4 BAR / 58 PSI
The wheels conform to safety standard JASO T203-85 for JWL dotE Certification. Before riding on public streets, be sure to check your local regulations.
Rotobox Boost Wheel set Weight example:
Stock S1000RR 11.70kg (25.79 lbs)
Rotobox Boost 6.69kg (14.74 lbs)
Weight saving more than 5.00kg of rotating mass. Incredible!
Item #: FA70350332
Condition: New
Custom Product: Rotobox Wheels are made to order with a 4-6 week production time. Please feel free to contact us for any questions.
Free Ground Shipping
Price: $1,812.00
ROTOBOX BOOST Rear KAWASAKI ZX10R 11+New
Rotobox BOOST Symmetric Rear Wheel
The new and improved model BOOST carbon fiber wheel from Rotobox, decreasing the weight from the RBX2 with improved design and higher performance! Comes in glo...
The new and improved model BOOST carbon fiber wheel from Rotobox, decreasing the weight from the RBX2 with improved design and higher performance! Comes in gloss and matte finish, in both symmetric and convex designs.
Like the RBX2, the BOOST is produced using Rotobox's unique 3-component composite - combining carbon, epoxy and stainless steel. By integrating the stainless 2,5 mm steel wire in each side of the rim, we increase its impact resistance at the most critical outer part. JWL and DOT approved, having met JASO T203-85 safety standards.
Another hidden BOOST gem - the Structural Rib. Thanks to the High Pressure Core Technology the structural rib is placed in the inner side between the spokes, with its mission to support the stress hot spot of the wheel. As a result the BOOST elegant spoke design brings greater stiffness and although the spokes are thinner the BOOST is stronger than ever - with a permissible static load of 280 kg on the rear and 180kg on the front wheel.
ASSEMBLING COMPONENTS
Carbon fiber composite rim, a one-piece hollow carbon cast, reinforced with stainless steel wire and UV protected; 7075 T6 aluminum alloy hubs, spacers and sprocket carrier [only with rear symmetric wheel]. machined from solid and hard anodized; polyurethane cushion drive set; SKF bearings; aluminum valve stem.
PRODUCT QUALITY CONTROL
Your Rotobox wheel has its own Serial Number to track the production history. We confirm to have performed quality verification procedure of your Rotobox wheel.
SIZE
17" x 6.00"
WEIGHT
REAR WHEEL WEIGHT 4.11 kg / 9.06 LBS
MAX. STATIC LOAD
REAR 280 kg / 617 LBS
MAX. OPERATING TEMPERATURE
100 C / 212 F
MAX. PRESSURE
4 BAR / 58 PSI
The wheels conform to safety standard JASO T203-85 for JWL dotE Certification. Before riding on public streets, be sure to check your local regulations.
Rotobox Boost Wheel set Weight example:
Stock S1000RR 11.70kg (25.79 lbs)
Rotobox Boost 6.69kg (14.74 lbs)
Weight saving more than 5.00kg of rotating mass. Incredible!
Item #: RA70600711
Condition: New
Custom Product: Rotobox Wheels are made to order with a 4-6 week production time. Please feel free to contact us for any questions.
Free Ground Shipping
Price: $2,410.00
Ohlins FGRT 225 Upside Down Front Fork Road & TrackNew
FGRT Upside Down Front Fork Road & Track FGRT 225 It doesn’t matter if you are heading for a National Roadracing title or if you are taking your bike on a run on
your favourite road. The...
It doesn’t matter if you are heading for a National Roadracing title or if you are taking your bike on a run on
your favourite road. The new Road & Track front fork will give you loads of performance, stable damping and fantastic comfort. The new Road & Track front fork features the Öhlins 30 mm Cartridge Kit inside, a winning kit in several national superbike championships.
Compression and rebound adjustments are easily done with compression adjustment in one leg and rebound
adjustment in the other leg. The new front fork gives a big improvement in tire feel, brake support and the general handling of the bike. The outer design has been redesigned to make this front fork even more attractive.
On-hand inventory ships within 24 hours. Please note supply-chain related delays are possible. Please contact us for ETA
Price: $2,599.00
Ohlins HO 363 TTX GP shock absorbersNew
End of 2017, Öhlins released an updated version of the well-proven TTX GP motorcycle shock absorber. Most of the model range has been replaced by the new version. There are still some of the pr...
End of 2017, Öhlins released an updated version of the well-proven TTX GP motorcycle shock absorber. Most of the model range has been replaced by the new version.
There are still some of the pre-2018 shock absorbers in stock and Öhlins DTC starts selling these out with a reduced SRP of 970,- EURO incl. 19% VAT from 01.08.2019.
The following pre-2018 products are currently available at a reduced price:
Some of these items are not in stock at ÖDTC. Therefore the delivery may take up to 2 weeks. <span style="font-size: 14px;">The campaign is valid as long as stock lasts. After being sold out, these items cannot be ordered any more.</span>
Item #: HO 363
Condition: New
On-hand inventory ships within 24 hours. Please note supply-chain related delays are possible. Please contact us for ETA
Price: $1,469.00
Ohlins KA 468 TTX GP Shock AbsorberNew
TTX GP Shock Absorber KA 468 Based on your bike’s performance, its price and available mounting space we have designed a shock that we think suits it, both when it comes to price and performan...
Based on your bike’s performance, its price and available mounting space we have designed a shock that we think suits it, both when it comes to price and performance.
We start by choosing a type which we tailor-make for your specific bike. The basic setup, the design of the shim stacks and the calibration of the adjusters, is tested both on road and track. They are the results of true tests with your bike and no guesswork!
Öhlins manufactures more than 300 different shock absorber models, each model is tailor-made for one specific bike. The concept of all Öhlins products is not a secret, it is precision. Precision provides superior control of the damping force and the key to our success.
Part number
KA 468
Type Code
T36PR1C1LS
T
Twin tube
36
Piston diameter: 36 mm
P
Monotube high pressure gas type of shock absorber with external “piggy back” reservoir.
R1
Adjustable rebound damping. Black adjuster on TTX36 shocks / silver adjuster on TTX GP shocks.
C1
Adjustable compression damping. Gold adjuster on TTX36 / TTX GP shocks.
ASSEMBLING COMPONENTS
Carbon fiber composite rim, a one-piece hollow carbon cast, reinforced with stainless steel wire and UV protected; 7075 T6 aluminium alloy hubs, spacers and sprocket carrier [only with rear symmetric wheel]. machined from solid and hard anodized; polyurethane cushion drive set; SKF bearings; aluminium valve stem.
PRODUCT QUALITY CONTROL
Your Rotobox wheel has its own Serial Number to track the production history. We confirm to have performed quality verification procedure of your Rotobox wheel.
SIZE
17" x 3.5"
WEIGHT
REAR WHEEL WEIGHT 2.58 kg / 5.68 LBS
MAX. STATIC LOAD
REAR 150 kg / 330 LBS
MAX. OPERATING TEMPERATURE
100 C / 212 F
MAX. PRESSURE
4 BAR / 58 PSI
The wheels conform to safety standard JASO T203-85 for JWL dotE Certification. Before riding on public streets, be sure to check your local regulations.
The complete set of RBX2 wheels, without brake rotors and sprocket, weighs:
6,65 kg (14.6 lbs) for Kawasaki ZX10R
6,61 kg (14.5 lbs) for Aprilia RSV4
6,90 kg (15.1 lbs) for BMW S1000RR
5,35 kg (11.6 lbs) for Ducati 1199 Panigale
Item #: FA70350132
Condition: New
Custom Product: Rotobox Wheels are made to order with a 4-6 week production time. Please feel free to contact us for any questions.
Free Ground Shipping
Price: $2,922.00
ROTOBOX RBX2 Rear KAWASAKI ZX10R 11+New
Rotobox RBX2 Symmetric Rear Wheel
ASSEMBLING COMPONENTS
Carbon fiber composite rim, a one-piece hollow carbon cast, reinforced with stainless steel wire and UV protected; 7075 T6 aluminium all...
ASSEMBLING COMPONENTS
Carbon fiber composite rim, a one-piece hollow carbon cast, reinforced with stainless steel wire and UV protected; 7075 T6 aluminium alloy hubs, spacers and sprocket carrier [only with rear symmetric wheel]. machined from solid and hard anodized; polyurethane cushion drive set; SKF bearings; aluminium valve stem.
PRODUCT QUALITY CONTROL
Your Rotobox wheel has its own Serial Number to track the production history. We confirm to have performed quality verification procedure of your Rotobox wheel.
SIZE
17" x 6.0"
WEIGHT
REAR WHEEL WEIGHT 4.11 kg / 9.06 LBS
MAX. STATIC LOAD
REAR 250 kg / 550 LBS
MAX. OPERATING TEMPERATURE
100 C / 212 F
MAX. PRESSURE
4 BAR / 58 PSI
The wheels conform to safety standard JASO T203-85 for JWL dotE Certification. Before riding on public streets, be sure to check your local regulations.
The complete set of RBX2 wheels, without brake rotors and sprocket, weighs:
6,65 kg (14.6 lbs) for Kawasaki ZX10R
6,61 kg (14.5 lbs) for Aprilia RSV4
6,90 kg (15.1 lbs) for BMW S1000RR
5,35 kg (11.6 lbs) for Ducati 1199 Panigale
Item #: RA70600511
Condition: New
Custom Product: Rotobox Wheels are made to order with a 4-6 week production time. Please feel free to contact us for any questions.
Vesrah Brake Pads VD-9031 RJL
-Fits Brembo M4 & M50 Calipers
-The RJL Brake Pad compound is the perfect choice for Aggressive Street Riders, Track Day Riding and Novice Racers.
Description:
Vesrah Brake Pads VD-9031 RJL
-Fits Brembo M4 & M50 Calipers
-The RJL Brake Pad compound is the perfect choice for Aggressive Street Riders, Track Day Riding and Novice Racers.
Item #: VD-9031RJL
Condition: New
On-hand inventory ships within 24 hours. When out of stock Please expect a 3 week ETA from manufacturer. Please note supply-chain related delays are possible.
Price: $86.10
Vesrah Brake Pads VD-9031XX for Brembo M4 M50 GP4RS GP4RX and .484 Cafe CalipersNew
=9031XX Will Fit OEM and most Brembo Calipers, Please Verify before ordering=
***Equivalent Brembo Racing Z04 Brake Pad : P/N: M497Z04***
*Sold per caliper
BREMBO CALIPERS:
Radial M4 100mm ...
for Brembo M4 M50 GP4RS GP4RX and .484 Cafe Calipers
Vesrah XX pads are the top of the line pad. MADE FOR RACING. They offer slightly less bite than the older RJL compound but greater braking power with a progressive feel. Small increases in lever force translate to exceptional increases in braking power. True one-finger braking with excellent feel and no fade. Your brakes will have the same feel and response from the first corner to the last.
Item #: VD-9031XX
Condition: New
Limited Supply: Only 2 Left!
On-hand inventory ships within 24 hours. When out of stock Please expect a 3 week ETA from manufacturer. Please note supply-chain related delays are possible.
Price: $117.60
4SR RACING DIABLO AR (Tech-Air Compatible)New
Are you looking for a top-class racing suit to accommodate your standalone airbag vest? Then you’ve just found the best Airbag Ready® leathers on the market. Our latest specificati...
Are you looking for a top-class racing suit to accommodate your standalone airbag vest? Then you’ve just found the best Airbag Ready® leathers on the market. Our latest specification Monster Green AR 1PC race suit comes with all the unique safety points you would expect from 4SR, but with our increased area of accordion stretch panel, this suit can now work safely in conjunction with any standalone airbag vest for racing.
Over the years we have been working with professional racers to develop the safest suits possible, this is our safest and most comfortable yet. Racing Diablo AR suit already comes with 18 ergonomically placed protectors and if you remove the 4SR Level 2 back and chest protectors, you can then wear your chosen airbag vest underneath. Easy and fast, you're now Airbag Ready!
Thanks to the unique cut and placement of accordion stretch panels, you can use several variants of standalone airbags available on the market. Our stitching and materials remain and will always remain 100% the same as our factory racers suits.
If you want to improve your motorcycle suit, leather jacket or trousers with leather logos, 4SR badging service is here for you!
The price includes knee and elbow sliders, internal protectors, removable chest and back protectors, double hip and coccyx protection and all from reputable brands. We have 18 ergonomically placed protectors, the most used in any mass-produced 1pc leather suit.
"WE MAKE OUR PRODUCTION SUITS IN THE SAME WAY WE PREPARE OUR FACTORY RACERS SUITS"
We have also developed a simple and effective solution for holding up your leathers between track sessions, 4SR's Zipper Lock system will effectively hold the upper half of your suit out of the way.
The one-piece Racing Diablo AR Airbag Ready is also equipped with:
Hollow hump to fit your Hydroback
Seamless stretch in the crotch and armpit area for increased movement
Flexible, comfortable material used on the sleeve cuffs
Zipper lock to hold your leathers in between track sessions
Elbow down TECH elbow sliders. Available in several colours - White, Black, Red, Fluorescent Red, Fluorescent Yellow and Green.
Standard equipment of the Racing Diablo AR Airbag Ready® includes:
1,2 mm thick cowhide / black, red, anthracite grey /
4SR Elbow down TECH - replaceable elbow sliders
offset shoulders and pre-curved sleeves for the perfect riding position
high specification Betac shoulder, elbows and knees, certificated in accordance with EN
YKK & OPTI Zippers
maximum perforation on chest area, local perforation on arms, hips and thighs
use of tripple seams & patented, double 4SR seam at more stressed points
soft strech sleeve cuffs
comfortable collar
reflective logo on collar
includes chest and back protectors (Both must be removed if using an Airbag system)
includes knee sliders
excludes Airbag system
AR suit is compatible with In&motion airbag systems, Alpinestars Tech-Air®
AR Airbag Ready® is a trademark registered in the Industrial Property Office of the Czech Republic
What does 4SR have and others don't?:
The suit is fully equipped with racing protectors, including chest and back protectors
Aramid stretch panel under the armpits and crotch is seamless
Inside the suit you will find a hidden pocket for a LapTimer
After closing the patent on the slider of the main zipper, the unzipped suit will not fall passed the butt
Areas prone to abrasion are connected by a patented, double 4SR seam, which is sewn 4x!
4SR suits have two layers of leather on the elbows, shoulders, hips and seating area
4SR leather was tested by the TÜV Rheinland® certification center according to the EN 13595-2: 2002 standard, where it withstood 11.2s in the abrasion resistance test. We received the Level 2 safety label for our leather.
Item #: 110111248
Condition: New
Ships within 24-48 hours and ships directly from our supplier. We will contact you if there is any delay or availability issues.
Price: $1,199.00
4SR RACING MONSTER GREEN AR (Tech-Air Compatible)New
Are you looking for a top-class racing suit to accommodate your standalone airbag vest? Then you’ve just found the best Airbag Ready® leathers on the market.
Our latest specificat...
Are you looking for a top-class racing suit to accommodate your standalone airbag vest? Then you’ve just found the best Airbag Ready® leathers on the market.
Our latest specification AR Monster Green 1PC race suit comes with all the unique safety points you would expect from 4SR, but with our increased area of accordion stretch panel, this suit can now work safely in conjunction with any standalone airbag vest for racing.
Over the years we have been working with professional racers to develop the safest suits possible, this is our safest and most comfortable yet. Racing Monster Green AR suit already comes with 18 ergonomically placed protectors and if you remove the 4SR Level 2 back and chest protectors, you can then wear your chosen airbag vest underneath. Easy and fast, you're now Airbag Ready!
Thanks to the unique cut and placement of accordion stretch panels, you can use several variants of standalone airbags available on the market. Our stitching and materials remain and will always remain 100% the same as our factory racers suits.
The price includes knee and elbow sliders, internal protectors, removable chest and back protectors, double hip and coccyx protection and all from reputable brands. We have 18 ergonomically placed protectors, the most used in any mass-produced 1pc leather suit.
"WE MAKE OUR PRODUCTION SUITS IN THE SAME WAY WE PREPARE OUR FACTORY RACERS SUITS"
We have also developed a simple and effective solution for holding up your leathers between track sessions, 4SR's Zipper Lock system will effectively hold the upper half of your suit out of the way.
The one-piece Racing AR Monster Green Airbag Ready is also equipped with:
Hollow hump to fit your Camelbak rehydration pack
Seamless stretch in the crotch and armpit area for increased movement
Flexible, comfortable material used on the sleeve cuffs
Zipper lock to hold your leathers in between track sessions
Elbow down TECH elbow sliders. Available in several colours - Black, Red, Fluorescent Red, Fluorescent Yellow and Green.
Standard equipment of the Racing Monster Green AR Airbag Ready® includes:
1,2 mm thick cowhide / black, Fluorescent Yellow, Fluorescent Red /
4SR Elbow down TECH - replaceable elbow sliders
Offset Shoulders and Pre-Curved Sleeves for the Perfect Riding Position
High Specification Betac Shoulder, Elbow and Knee Pads (Certified according to EN 1621-1: 2012)
YKK & OPTI Zippers
Maximum Perforation on chest area, local perforation on arms, hips and thighs
complete front perforation & local perforations underarm
3D mesh lining
Kevlar stretch panels for maximum mobility
flexible leather panels
hollow aerodynamic hump to fit camelbak
use of double seams at more stressed points
soft kevlar sleeve cuffs
comfortable collar
reflective logo on collar
includes chest and spine protectors (Both must be removed if using an Airbag system)
includes knee sliders
excluding Airbag system
AR suit is compatible with In & motion airbag system, Alpinestars Tech-Air®,
AR Airbag Ready® is a trademark registered in the Industrial Property Office of the Czech Republic
Item #: 11011658-58
Condition: New
Ships within 24-48 hours and ships directly from our supplier. We will contact you if there is any delay or availability issues.
Price: $1,199.00
Carbonin Avio Fiber left side panel 2016-2020 Kawasaki ZX-10RNew
Description:
Replacement left side fairing with Dzus
Item #: K18231AF
Condition: New
On-hand inventory ships within 24 hours. Avio Fiber has a typical eta of 4-6 weeks, Carbon Fiber can take up to 8 weeks due to production times. Please note supply-chain related delays are possible.
On-hand inventory ships within 24 hours. Avio Fiber has a typical eta of 4-6 weeks, Carbon Fiber can take up to 8 weeks due to production times. Please note supply-chain related delays are possible.
• Upper Race Fairing (8 Dzus)
• Lower Fairing
• Left Side Panel (3 Dzus)
• Right Side Panel (3 Dzus)
• Single Race Seat (2 Pcs)
•
There are 3 options for seats
• Basic - Thi...
Description:
• Upper Race Fairing (8 Dzus)
• Lower Fairing
• Left Side Panel (3 Dzus)
• Right Side Panel (3 Dzus)
• Single Race Seat (2 Pcs)
•
There are 3 options for seats
• Basic - This seat is a 15mm neoprene foam glued to a base that is molded from the seat pan of the tail section and then attaches to the seat pan with bolts. Please not that these seat's will only fit carbonin seat pans and seat units. It will not work on any other brand. This foam will wear out like any other foam pad.
• Standard - This is an upgrade to the basic seat which is covered in a neoprene material that protects the basic foam and provides the rider a level of grip but without compromising the need to slide side to side. It looks much more professional and will protect the basic foam from any wear from patches on leather suits or abuse from side to side movements. we have seen these seats go on for 3 seasons or more!
• Pro Seat - This seat is for riders or teams that require their seat to provide back support or a step seat to keep them in a position from sliding too far back in the seat under acceleration, this is often done with a raised section so they can still get back in the seat in the full tuck, they are just raised up more which helps keep the butt up and their head shoulders and chest lower in the tuck. It is the same material as the standard seat but can also be customized with team logo's or race number -If you purchase a pro seat we will contact you to design your seat. Please note pro seats are made custom to order
Item #: K18100AF
Condition: New
On-hand inventory ships within 24 hours. Avio Fiber has a typical eta of 4-6 weeks, Carbon Fiber can take up to 8 weeks due to production times. Please note supply-chain related delays are possible.
Price: $1,097.47
Carbonin Avio Fiber Right Side Panel 2016-2020 Kawasaki ZX-10RNew
Description:
Replacement right side fairing with Dzus
Item #: K18232AF
Condition: New
On-hand inventory ships within 24 hours. Avio Fiber has a typical eta of 4-6 weeks, Carbon Fiber can take up to 8 weeks due to production times. Please note supply-chain related delays are possible.
On-hand inventory ships within 24 hours. Avio Fiber has a typical eta of 4-6 weeks, Carbon Fiber can take up to 8 weeks due to production times. Please note supply-chain related delays are possible.
Price: $372.05
Carbonin Carbon Fiber Left Side Panel 2016-2020 Kawasaki ZX10RNew
Replacement left side Fairing For Carbonin complete fairing, will not fit with other brands
Description:
Replacement left side Fairing For Carbonin complete fairing, will not fit with other brands
Item #: CK18231
Condition: New
On-hand inventory ships within 24 hours. Avio Fiber has a typical eta of 4-6 weeks, Carbon Fiber can take up to 8 weeks due to production times. Please note supply-chain related delays are possible.
Description:
Replacement lower race Fairing For Carbonin complete fairing, will not fit with other brands
Item #: CK18220
Condition: New
On-hand inventory ships within 24 hours. Avio Fiber has a typical eta of 4-6 weeks, Carbon Fiber can take up to 8 weeks due to production times. Please note supply-chain related delays are possible.
Parts Included In Complete Race Fairing:
• Upper Race Fairing (8 Dzus)
• Lower Fairing
• Left Side Panel (3 Dzus)
• Right Side Panel (3 Dzus)
• Single Race Seat (2 Pcs)
There are 3 ...
Description:
Parts Included In Complete Race Fairing:
• Upper Race Fairing (8 Dzus)
• Lower Fairing
• Left Side Panel (3 Dzus)
• Right Side Panel (3 Dzus)
• Single Race Seat (2 Pcs)
There are 3 options for seats (not included in kit)
Basic - This seat is a 15mm neoprene foam glued to a base that is molded from the seat pan of the tail section and then attaches to the seat pan with bolts. Please not that these seat's will only fit carbonin seat pans and seat units. It will not work on any other brand. This foam will wear out like any other foam pad.
Standard - This is an upgrade to the basic seat which is covered in a neoprene material that protects the basic foam and provides the rider a level of grip but without compromising the need to slide side to side. It looks much more professional and will protect the basic foam from any wear from patches on leather suits or abuse from side to side movements. we have seen these seats go on for 3 seasons or more!
Pro Seat - This seat is for riders or teams that require their seat to provide back support or a step seat to keep them in a position from sliding too far back in the seat under acceleration, this is often done with a raised section so they can still get back in the seat in the full tuck, they are just raised up more which helps keep the butt up and their head shoulders and chest lower in the tuck. It is the same material as the standard seat but can also be customized with team logo's or race number -If you purchase a pro seat we will contact you to design your seat. Please note pro seats are made custom to order
Item #: CK18100
Condition: New
On-hand inventory ships within 24 hours. Avio Fiber has a typical eta of 4-6 weeks, Carbon Fiber can take up to 8 weeks due to production times. Please note supply-chain related delays are possible.
Price: $2,242.95
Carbonin Carbon Fiber Right Side Panel 2016-2020 Kawasaki ZX10RNewItem #: CK18232Carbonin
On-hand inventory ships within 24 hours. Avio Fiber has a typical eta of 4-6 weeks, Carbon Fiber can take up to 8 weeks due to production times. Please note supply-chain related delays are possible.
Price: $396.72
Carbonin Carbon Fiber Tail Unit 2016-2020 Kawasaki ZX10RNew
Description:
Replacement SBK Tail unit for carbonin bodywork
Item #: CK18300
Condition: New
On-hand inventory ships within 24 hours. Avio Fiber has a typical eta of 4-6 weeks, Carbon Fiber can take up to 8 weeks due to production times. Please note supply-chain related delays are possible.
Description:
Replacement Upper Fairing For Carbonin complete fairing, will not fit with other brands
Item #: CK18210
Condition: New
On-hand inventory ships within 24 hours. Avio Fiber has a typical eta of 4-6 weeks, Carbon Fiber can take up to 8 weeks due to production times. Please note supply-chain related delays are possible.
=9031SS Will Fit OEM and most Brembo Calipers, Please Verify before ordering=
***Equivalent Brembo Racing Z04 Brake Pad : P/N: M497Z04***
*Sold per caliper
BREMBO CALIPERS:
Radial M4 100mm ...
Vesrah developed the new SS pad in conjunction with Ducati. This is the next evolution pad beyond the XX compound and is currently only available for the Brembo Monoblock calipers.
-Has all the braking power of the XX pads with the harder initial bite of the SRJL pads.
-Works great hot or cold, wet or dry.
-All the outstanding qualities of the XX pad with even more improvements in wear and heat resistance.
-Nobody else has a pad that comes close to the new Vesrah SS!
Item #: VD-9031SS
Condition: New
On-hand inventory ships within 24 hours. When out of stock Please expect a 3 week ETA from manufacturer. Please note supply-chain related delays are possible.
Price: $130.20
Carbonin Avio Fiber Front Fender 16-21 Kawasaki ZX10RNew
On-hand inventory ships within 24 hours. Avio Fiber has a typical eta of 4-6 weeks, Carbon Fiber can take up to 8 weeks due to production times. Please note supply-chain related delays are possible.
Price: $126.68
Carbonin Avio Fiber Tail Unit 2016-2020 Kawasaki ZX-10RNew
On-hand inventory ships within 24 hours. Avio Fiber has a typical eta of 4-6 weeks, Carbon Fiber can take up to 8 weeks due to production times. Please note supply-chain related delays are possible.
Price: $305.36
Carbonin Carbon Fiber Front Fender 2016-2021 Kawasaki ZX-10R/RRNew
On-hand inventory ships within 24 hours. Avio Fiber has a typical eta of 4-6 weeks, Carbon Fiber can take up to 8 weeks due to production times. Please note supply-chain related delays are possible.
Price: $236.03
Supreme Technology OverSuspension for the 2016+ Kawasaki ZX10RNew
Welcome to the latest development in superbike suspension, introducing the high side saving OVERSUSPENSION from Supreme Technology based in Italy. As seen on the WSBK Barni Racing Ducati V4!
Thi...
Description:
Welcome to the latest development in superbike suspension, introducing the high side saving OVERSUSPENSION from Supreme Technology based in Italy. As seen on the WSBK Barni Racing Ducati V4!
This new patented device is called "Oversuspension" - OverSuspension is a special resonator capable of removing the resonances of the rear swingarm group and giving the vehicle more stability, traction, braking and comfort, as well as facilitating the dynamic operation of the suspension, and greatly improving driving safety in every condition, for example reducing the possibility of highside on the track by up to 90%.
Item #: OVS-STB/KawZX10R
Condition: New
On-hand inventory ships within 24 hours. When out of stock Please expect a 3 week ETA from manufacturer. Please note supply-chain related delays are possible.
=9031ZZ Will Fit OEM and most Brembo Calipers, Please Verify before ordering=
***Equivalent Brembo Racing Z04 Brake Pad : P/N: M497Z04***
*Sold per caliper
BREMBO CALIPERS:
Radial M4 100mm ...
The Vesrah ZZ Pad Compound is the newest evolution of the Vesrah Racing Brake Compounds. The ZZ Compound outperforms the XX Brake pad compound across all temperature ranges. The RJL-ZZ Brake Pad compound is perfect for the Racer and Aggressive street/ track rider alike looking for more performance across all temperature ranges from their brakes.
Item #: VD-9031ZZ
Condition: New
On-hand inventory ships within 24 hours. When out of stock Please expect a 3 week ETA from manufacturer. Please note supply-chain related delays are possible.
Price: $126.00
Accossato Adjustable Pair Of clip-on w/ inclination from 6 to 10 Degree w/ inner ringNew
Adjustable clip-ons with 6Degree to 10Degree inclination forniti with internal ring. The system is designed to adapt the clip-ons to different diamters of forks by easily replacing the internal bro...
Description:
Adjustable clip-ons with 6Degree to 10Degree inclination forniti with internal ring. The system is designed to adapt the clip-ons to different diamters of forks by easily replacing the internal bronze bearing provided - choosing from differenz sizes. They are made in CNC-worked Aluminum.
Item #: CP001
Condition: New
On-hand inventory ships within 24 hours. Please note supply-chain related delays are possible.
Price: $349.80
Accossato Adjustable Racing Street Rearsets Made in Aluminum Kawasaki Ninja ZX-10R 2016-2019New
Accossato Adjustable Racing Street Rearsets made in Aluminum. Compatible with specific motorcycle applications offering a rearward position compared to the original one..
Description:
Accossato Adjustable Racing Street Rearsets made in Aluminum. Compatible with specific motorcycle applications offering a rearward position compared to the original one..
Item #: FT105
Condition: New
On-hand inventory ships within 24 hours. Please note supply-chain related delays are possible.
Price: $386.10
Accossato Aluminum-forged clip-on provided w/ metal clamp composed of 2 half-rings 10 degrees inclinationNew
Pair of clip-ons provided with metal clamp 2 half rings provided 10° inclination. The 2 half-rings system enables to easily replace the clip-ons without desmantling the fork. The bracelets are a...
Description:
Pair of clip-ons provided with metal clamp 2 half rings provided 10° inclination. The 2 half-rings system enables to easily replace the clip-ons without desmantling the fork. The bracelets are available in black and silver - many sizes available. They are made in Aluminumforged.
Item #: CP003
Condition: New
On-hand inventory ships within 24 hours. Please note supply-chain related delays are possible.
Price: $210.10
Accossato Brake Pads Kit For Motorcycle, Compound, AGPA106 codeNew
Accossato Brake Pad AGPA106 (dimensions 102x44x7.6). Brake pads kit available in four compounds: SINTERED. ZXC. EV1 or EV2. 2 pads included in the box.
Description:
Accossato Brake Pad AGPA106 (dimensions 102x44x7.6). Brake pads kit available in four compounds: SINTERED. ZXC. EV1 or EV2. 2 pads included in the box.
Item #: AGPA106
Condition: New
On-hand inventory ships within 24 hours. Please note supply-chain related delays are possible.
Price: $44.00
Accossato Brake Pads Kit For Motorcycle, Compound, AGPP39 codeNew
Accossato Brake Pad AGPP39 (dimensions 77.5x42.1x9). Brake pads kit available in SINTERED compound. 2 pads included in the box.
Description:
Accossato Brake Pad AGPP39 (dimensions 77.5x42.1x9). Brake pads kit available in SINTERED compound. 2 pads included in the box.
Item #: AGPP39
Condition: New
On-hand inventory ships within 24 hours. Please note supply-chain related delays are possible.
Price: $41.80
Accossato Cables for Accossato Throttle Control For Kawasaki ZX-10R (2016-2020)New
Cables for Accossato Throttle controls - specific for motorcycles: Kawasaki ZX-10R (2016-2020). The cables are Compatible for Accossato Throttle control (from code MY001 to MY009)
Description:
Cables for Accossato Throttle controls - specific for motorcycles: Kawasaki ZX-10R (2016-2020). The cables are Compatible for Accossato Throttle control (from code MY001 to MY009)
Item #: ZX012
Condition: New
On-hand inventory ships within 24 hours. Please note supply-chain related delays are possible.
Price: $106.70
Accossato CNC clip-on provided w/ metal clamp composed of 2 half-rings 10 degrees inclinationNew
Lifted clip-on 10° or 20° mm inclination 10° inclination. Sono disponibili per forcelle di diameter 50 mm e hanno un rialzo + 10 o + 20 mm to make your racing experience more comfortable....
Description:
Lifted clip-on 10° or 20° mm inclination 10° inclination. Sono disponibili per forcelle di diameter 50 mm e hanno un rialzo + 10 o + 20 mm to make your racing experience more comfortable. The bracelets can be black or silver colour. They are made in CNC-worked Aluminum.
Item #: CP004
Condition: New
On-hand inventory ships within 24 hours. Please note supply-chain related delays are possible.
Accossato Crash Pads - They are made in Plastic material and CNC-worked Aluminum. The insert is coloured anodyzed and you can also get the screw cover in the same colour.
Description:
Accossato Crash Pads - They are made in Plastic material and CNC-worked Aluminum. The insert is coloured anodyzed and you can also get the screw cover in the same colour.
Item #: TP042
Condition: New
On-hand inventory ships within 24 hours. Please note supply-chain related delays are possible.
Price: $92.40
Accossato Fixed Brake Lever in CNC Aluminum cod. EDF099New
Accossato fixed brake lever Made in CNC-worked alluminium. Available options: short and long. Anodyzed in 7 different colours. Compatible with applications of specific motorcycles.
Description:
Accossato fixed brake lever Made in CNC-worked alluminium. Available options: short and long. Anodyzed in 7 different colours. Compatible with applications of specific motorcycles.
Item #: EDF099
Condition: New
On-hand inventory ships within 24 hours. Please note supply-chain related delays are possible.
Price: $84.70
Accossato Front Brake Fluid Reservoir Cap CNC AluminumNew
Accossato cap Compatible with the front brake fluid reservoir - check the specific applications for motorcycles. It is made in Aluminum Coloured CNC-worked and anodyzed.
Description:
Accossato cap Compatible with the front brake fluid reservoir - check the specific applications for motorcycles. It is made in Aluminum Coloured CNC-worked and anodyzed.
Item #: TS003
Condition: New
On-hand inventory ships within 24 hours. Please note supply-chain related delays are possible.
Price: $30.80
Accossato Fuel Cap w/ Quick Action System in CNC AluminumNew
Accossato fuel-caps with quick action system made in CNC-worked Aluminum. The closing cap is also available separately - many colours available.
Description:
Accossato fuel-caps with quick action system made in CNC-worked Aluminum. The closing cap is also available separately - many colours available.
Item #: FC013
Condition: New
On-hand inventory ships within 24 hours. Please note supply-chain related delays are possible.
Price: $127.60
Accossato Hand Rear Master Cylinder - HRMC -With Piston of 13.5 mmNew
The Hand Rear Brake Master Cylinder HRMC Accossato For Motorcycles is in CNC-worked aluminium. The Piston Diameter is 13.5 mm. It is provided with standard length lever and special mounting bracket.
Description:
The Hand Rear Brake Master Cylinder HRMC Accossato For Motorcycles is in CNC-worked aluminium. The Piston Diameter is 13.5 mm. It is provided with standard length lever and special mounting bracket.
Item #: MP004
Condition: New
Limited Supply: Only 1 Left!
On-hand inventory ships within 24 hours. Please note supply-chain related delays are possible.
Price: $733.80
Accossato Oil Filler Cap CNC Aluminum - Measures: M30X15New
Accossato Oil Filler Cap made in Aluminum CNC-worked e anodyzed in 7 different colours. It is Compatible with motorcycle appliations and adaptable on other motorcycles with a cap size of: M30X15
Description:
Accossato Oil Filler Cap made in Aluminum CNC-worked e anodyzed in 7 different colours. It is Compatible with motorcycle appliations and adaptable on other motorcycles with a cap size of: M30X15
Item #: FP005
Condition: New
On-hand inventory ships within 24 hours. Please note supply-chain related delays are possible.
The Accossato Rear Brake Master Cylinder For Motorcycles is in CNC-worked Aluminum with black superficial hard anodyzing treatment. The Piston Diameter is 10.5 mm
Description:
The Accossato Rear Brake Master Cylinder For Motorcycles is in CNC-worked Aluminum with black superficial hard anodyzing treatment. The Piston Diameter is 10.5 mm
Item #: MP001
Condition: New
Limited Supply: Only 2 Left!
On-hand inventory ships within 24 hours. Please note supply-chain related delays are possible.
The Accossato Rear Brake Master Cylinder For Motorcycles is in CNC-worked aluminum with black superficial hard anodizing treatment. The Piston Diameter is 13.5 mm
Description:
The Accossato Rear Brake Master Cylinder For Motorcycles is in CNC-worked aluminum with black superficial hard anodizing treatment. The Piston Diameter is 13.5 mm
Item #: MP003
Condition: New
On-hand inventory ships within 24 hours. Please note supply-chain related delays are possible.
The Accossato double-ended rear brake master cylinder for motorcycles is in CNC-worked aluminium with black superficial hard anodyzing treatment. The piston diameter is 13.5 mm. The double-ended br...
Description:
The Accossato double-ended rear brake master cylinder for motorcycles is in CNC-worked aluminium with black superficial hard anodyzing treatment. The piston diameter is 13.5 mm. The double-ended brake master cylinder allows it to be mounted in conjunction with a rear handlebar pump while maintaining the use of the pedal brake.
Item #: MP005
Condition: New
On-hand inventory ships within 24 hours. Please note supply-chain related delays are possible.
Price: $527.49
Accossato Stand supports w/ protection for Motocycles - screw pitch M8New
Accossato Stand supports made inAluminum and available in 7 different colurs with rubber protection - thread pitch: M8 - Compatible with many motorcycle applications.
Description:
Accossato Stand supports made inAluminum and available in 7 different colurs with rubber protection - thread pitch: M8 - Compatible with many motorcycle applications.
Item #: ST008
Condition: New
On-hand inventory ships within 24 hours. Please note supply-chain related delays are possible.
Price: $40.70
Accossato Stand supports w/out protection for Motocycles - screw pitch M8New
Accossato Stand supports made in Aluminum and available in 7 different colurs withouth rubber protection - thread pitch: M8 - Compatible with many motorcycle applications.
Description:
Accossato Stand supports made in Aluminum and available in 7 different colurs withouth rubber protection - thread pitch: M8 - Compatible with many motorcycle applications.
Item #: ST002
Condition: New
On-hand inventory ships within 24 hours. Please note supply-chain related delays are possible.
Price: $28.60
Accossato Streering Nut Open screw pitch M28x1 AluminumNew
Accossato open Streering Nut - Screw M28x1 Made in CNC-worked Aluminum and anodyzed Available in 7 different colours. It is Compatible with specific motorcycles.
Description:
Accossato open Streering Nut - Screw M28x1 Made in CNC-worked Aluminum and anodyzed Available in 7 different colours. It is Compatible with specific motorcycles.
Item #: SA001
Condition: New
On-hand inventory ships within 24 hours. Please note supply-chain related delays are possible.
Price: $19.80
AIM Solo 2 Mounting Bracket 2016-2019 Kawasaki ZX10RNew
Kawasaki ZX10R Plug & Play cable for Solo 2 DL For models: Kawasaki Ninja ZX-10R MY2011 2011-2015 Kawasaki Ninja ZX-10R MY2011 Racing kit 2011-2015 Kawasaki Ninja ZX-10R MY2016 from 2016...
Akrapovic Titanium Evolution system AK-S-K10E9-ZC, Kawasaki ZX-10R 2016-20, muffler with carbon sleeve, 4>2>1 full titanium system, lambda plug, hexagonal muffler with EU type approval, 350 mm len...
Description:
Akrapovic Titanium Evolution system AK-S-K10E9-ZC, Kawasaki ZX-10R 2016-20, muffler with carbon sleeve, 4>2>1 full titanium system, lambda plug, hexagonal muffler with EU type approval, 350 mm length with db-killer (V-TUV050/3)
Item #: S-K10E9-ZC
Condition: New
Ships within 24-48 hours and ships directly from our supplier. Please note supply-chain related delays are possible.
Price: $2,508.00
Alpha Racing ABS Remover, Kawasaki ZX-10R 2016-2020New
Alpha Racing ABS Remover, Kawasaki ZX-10R 2016-2020 3451K001A00
ABS Remover, for Kawasaki ZX-10R 2016-2020, plug for OEM wiring, allows the removal of the ABS module, by I2M
Description:
Alpha Racing ABS Remover, Kawasaki ZX-10R 2016-2020 3451K001A00
ABS Remover, for Kawasaki ZX-10R 2016-2020, plug for OEM wiring, allows the removal of the ABS module, by I2M
Item #: 3451K001A00
Condition: New
On-hand inventory ships within 24 hours. We place weekly orders with Alpha, If we are out of stock on an item we can have it within 2 to 3 weeks Order now to insure you are allocated from the next shipment. Please note supply-chain related delays are possible.
Racing battery BMZ LiPo, lithium-polymer battery 4.6 Ah
Item #: 6121A000A00
Condition: New
On-hand inventory ships within 24 hours. We place weekly orders with Alpha, If we are out of stock on an item we can have it within 2 to 3 weeks Order now to insure you are allocated from the next shipment. Please note supply-chain related delays are possible.
Price: $330.63
Alpha Racing Brake lever Racing blade long, for Brembo 19RCSNew
Alpha Racing Brake lever Racing blade long, for Brembo 19RCS BMW S1000RR/HP4 2009-2019,S1000R 2014-2016,S1000XR 2015-2016,M1000RR 2021- 3272A002A00
Brake lever Racing blade long, for Brembo mast...
Description:
Alpha Racing Brake lever Racing blade long, for Brembo 19RCS BMW S1000RR/HP4 2009-2019,S1000R 2014-2016,S1000XR 2015-2016,M1000RR 2021- 3272A002A00
Brake lever Racing blade long, for Brembo master cylinder 19RCS, black anodised, optional with remote adjuster available
Item #: 3272A002A00
Condition: New
On-hand inventory ships within 24 hours. We place weekly orders with Alpha, If we are out of stock on an item we can have it within 2 to 3 weeks Order now to insure you are allocated from the next shipment. Please note supply-chain related delays are possible.
Price: $55.45
Alpha Racing Brake reservoir kit for Brembo 19RCSNew
Alpha Racing Brake reservoir kit for Brembo 19RCS 3272A016A00
Brake reservoir kit for Brembo radial master cylinder 19RCS, reservoir with hose and bracket
weight: 0,10 kg
Description:
Alpha Racing Brake reservoir kit for Brembo 19RCS 3272A016A00
Brake reservoir kit for Brembo radial master cylinder 19RCS, reservoir with hose and bracket
weight: 0,10 kg
Item #: 3272A016A00
Condition: New
On-hand inventory ships within 24 hours. We place weekly orders with Alpha, If we are out of stock on an item we can have it within 2 to 3 weeks Order now to insure you are allocated from the next shipment. Please note supply-chain related delays are possible.
Price: $63.48
Alpha Racing Brembo Racing brake caliper kit GP4-RX, 100 mmNew
Alpha Racing Brembo Racing brake caliper kit GP4-RX, 100 mm 3411A050B00
Brembo Racing brake caliper kit GP4-RX 4-piston 32/32 (right/left), 2 pieces, fits BMW S 1000 RR OEM fork, 100 mm hole dis...
Description:
Alpha Racing Brembo Racing brake caliper kit GP4-RX, 100 mm 3411A050B00
Brembo Racing brake caliper kit GP4-RX 4-piston 32/32 (right/left), 2 pieces, fits BMW S 1000 RR OEM fork, 100 mm hole distance
Item #: 3411A050B00
Condition: New
On-hand inventory ships within 24 hours. We place weekly orders with Alpha, If we are out of stock on an item we can have it within 2 to 3 weeks Order now to insure you are allocated from the next shipment. Please note supply-chain related delays are possible.
Price: $1,926.14
Alpha Racing Dashboard carrier light Kawasaki ZX-10R 2016-New
Alpha Racing Dashboard carrier light Kawasaki ZX-10R 2016- 4663K101A00
Dashboard carrier light, for Kawasaki ZX-10R 2016-, for OEM dashboard, welded aluminum
Description:
Alpha Racing Dashboard carrier light Kawasaki ZX-10R 2016- 4663K101A00
Dashboard carrier light, for Kawasaki ZX-10R 2016-, for OEM dashboard, welded aluminum
Item #: 4663K101A00
Condition: New
On-hand inventory ships within 24 hours. We place weekly orders with Alpha, If we are out of stock on an item we can have it within 2 to 3 weeks Order now to insure you are allocated from the next shipment. Please note supply-chain related delays are possible.
Price: $157.81
Alpha Racing Fuel cap "quick action" Kawasaki ZX-10R 2008-New
Alpha Racing Fuel cap "quick action" Kawasaki ZX-10R 2008- 1611K002A00
Fuel cap "quick action", for Kawasaki ZX-10R 2008-, black anodised
Description:
Alpha Racing Fuel cap "quick action" Kawasaki ZX-10R 2008- 1611K002A00
Fuel cap "quick action", for Kawasaki ZX-10R 2008-, black anodised
Item #: 1611K002A00
Condition: New
On-hand inventory ships within 24 hours. We place weekly orders with Alpha, If we are out of stock on an item we can have it within 2 to 3 weeks Order now to insure you are allocated from the next shipment. Please note supply-chain related delays are possible.
Price: $99.47
Alpha Racing LED Lite dashboard Kawasaki ZX-10R 2016-2018New
Alpha Racing LED Lite dashboard Kawasaki ZX-10R 2016-2018 6211K300A00
LED Lite dashboard, for Kawasaki ZX-10R 2016-, wiring and GPS antenna, same functionalities as OEM, integrated data logger (...
Description:
Alpha Racing LED Lite dashboard Kawasaki ZX-10R 2016-2018 6211K300A00
LED Lite dashboard, for Kawasaki ZX-10R 2016-, wiring and GPS antenna, same functionalities as OEM, integrated data logger (sensors and wiring to be ordered separately) plug&play solution for easy connection to OEM electronics, including CNC machined bracket
- only for race track use -
Item #: 6211K300A00
Condition: New
On-hand inventory ships within 24 hours. We place weekly orders with Alpha, If we are out of stock on an item we can have it within 2 to 3 weeks Order now to insure you are allocated from the next shipment. Please note supply-chain related delays are possible.