HHR Performance » 2016, Ninja ZX-10R

Description: I2M CHROME ADAPTER CARD



Compatible with: Chrome lite / plus / pro



The I2M adapter card is required to connect the I2M Chrome instrumentation harness to your bike.

Completely Plug & Play and therefore does not require any modification or further connections.

Description: MIVV Full System Stainless Steel Exhaust For KAWASAKI ZX-10 R / RR / SE 2016 - 2022 X.KA.0006.SDRX

Description: MIVV NO-KAT Pipe Stainless Steel Exhaust For KAWASAKI ZX-10 R / RR / SE 2016 - 2020 K.042.C1

Description: HHR Favorite 
High precision, accurate to +/- 0.6 psi
Precise digital readout to 0.1 psi
Continuous pressure reading, no need to reset when activating bleed valve
Four selectable scales (PSI, BAR, KG-CM2, kPa)
Large easy to read display with back light for low light applications
Billet aluminum trapezoid body
Billet aluminum air chuck provides tight, leak free seal to tire valve and is specially designed for reading air pressure
High flow push button bleeder valve for precise pressure adjustment
15 inch long high pressure hose with dual swivels and Motion Pro design air chuck
Heavy duty anti-shock protective rubber boot on gauge
Battery powered (1000 tests) with battery strength indicator
Auto off to extend the battery life
Batteries included (Qty. 2 AAA size)
Two year limited warranty

Description: MWR Air Filter Kawasaki ZX-10R (2016+) MC-040-16-HE

Not a copy of the standard air filter, always searching for solutions, either it’s the performance , protection or fitment . Caution: clean and re-oil at least once a year with MWR air filter oil & cleaner . Remapping the ECU or the Fuel Control Module is recommended

Description: MWR Intake Insert (Spoiler) for the Kawasaki ZX-10R (2016+) MWR-IN-440

Description: MWR Racing Fairing Stay for the Kawasaki ZX-10R (2016+) MWR-AT-455

Not a copy of the standard air filter, always searching for solutions, either it’s the performance , protection or fitment . Caution: clean and re-oil at least once a year with MWR air filter oil & cleaner . Remapping the ECU or the Fuel Control Module is recommended

Description: MWR Velocity Stacks for the Kawasaki ZX-10R (2016-2018) MWR-VS-400

Not a copy of the standard air filter, always searching for solutions, either it’s the performance , protection or fitment . Caution: clean and re-oil at least once a year with MWR air filter oil & cleaner . Remapping the ECU or the Fuel Control Module is recommended

Description: MWR XXL Intake Duct for the Kawasaki ZX-10R / ZX-10RR (2011-2020) MWR-AT-450

Description: Qnium Radial Rear Left Hand Brake Master Cylinder 12mm

Many riders like to control the rear brake with their left hand. The Left Hand Brake gives riders optimum control over their rear brakes. The material use of the Qnium Radial Left Hand Brake is of sublime quality. Your fingers will give you a lot more feeling by braking than your foot. Qnium’s Left Hand Brake can help when you’re looking for fast lap times on the circuits. The brake feels better with your hand than with your feet. The brake can be operated with very little force. You will experience more control in the braking phase and when turning in the middle of the corner. With this radial left hand brake brake it is also possible to brake, when you steer your bike to the right and having a lean angle. For riders who want to keep the pedal brake as well as the Left Hand Brake, Qnium has also created rear brake master cylinders to compliment this setup, available with an extra banjo connection for a pass through design.

These high quality brake levers can be placed both above and below the lever of the clutch.

Used in Moto2, Moto3, and in other FIM world championships. Top Moto2 riders like Bo Bendsneyder, Thomas Luthi and Marcel Schrotter are using the Qnium Radial Left Hand Brake to get the best out of their races.

Made in Netherlands

Description: Qnium Radial Rear Thumb Brake Master Cylinder 12mm

The Radial Thumb Brake from Qnium is one of the most optimized thumb brakes on the market for the rear wheel. As a rider you have a lot more feeling in your thumb than in your foot. The Qnium Radial Thumb Brake makes it easier to operate the rear brake in a very controlled way. This high-end thumb brake is very popular in the Moto3 class. A brake lever is not an option on these bikes, as Moto3 riders are required to use the clutch lever. When you mount the Rear Master from Qnium on your bike, you can continue to use your foot brake.

Used in Moto2, Moto3, and in other FIM world championships. Drivers like Tony Arbolino and Dennis Foggia managed to win Grand Prix races with the revolutionary Qnium Thumb Brake. In 2019 Lorenzo Dalla Porta also used the Qnium’s Radial Thumb Brake, when he became World Champion Moto3.

Made in The Netherlands

Description: *NEW Rotobox Bullet Forged Carbon Fiber Front Wheel Size 17"X 3.5"

Rotobox has extended its carbon motorcycle wheel product line by unveiling the Rotobox Bullet, the new thin spoke, ultra-light forged carbon wheel at EICMA. Rotobox is one of the leading companies in the development of lightweight high-performance carbon automotive wheels. It is also a company not satisfied with just keeping up with trends but setting them.

The wheels conform to safety standard JASO T203-85 for JWL dotE Certification. Before riding on public streets, be sure to check your local regulations.

Description: *NEW Rotobox Bullet Forged Carbon Fiber Rear Wheel Size 17"X 6"
REAR WHEEL Weight
4.06 kg (8.95 lbs)

Includes Sprocket Carrier and Cush Drive Rubbers

Rotobox has extended its carbon motorcycle wheel product line by unveiling the Rotobox Bullet, the new thin spoke, ultra-light forged carbon wheel at EICMA. Rotobox is one of the leading companies in the development of lightweight high-performance carbon automotive wheels. It is also a company not satisfied with just keeping up with trends but setting them.

The wheels conform to safety standard JASO T203-85 for JWL dotE Certification. Before riding on public streets, be sure to check your local regulations.

UV PROTECTIVE COATING:
The carbon cast is protected from radiation with a very thin layer of special clear UV protective coating. Together with the clear and smooth rim surface it ensures the wheel a zero notch effect.

HIGH QUALITY CENTER PARTS:
For each motorcycle model the hubs are CNC machined from high quality 7075 T6 aluminum alloy used in the aviation industry, anodized into optional color and permanently assembled to the carbon rim.

SOLID THIN SPOKES:
To create solid thin spokes we use special carbon fiber yarn developed for military use.

THREE-COMPONENT-COMPOSITE:
Produced using Rotobox's unique 3 component composite - combining carbon, epoxy and stainless steel. The stainless 2,5 mm steel wire is integrated in each side of the rim increasing its impact resistance at the most critical outer part.

Titanium Hex Head Bolts M10x1.5x25mm:
Made from Aircraft Spec Grade 5 Titanium Alloy. Special high performance design by Rotobox. Precision machined with rolled threads and completely corrosion free. Excellent durability and minimum weight, 45% lighter than steel equivalents. Available optionally with the wheels.

CHOPPED CARBON FIBERS MEETS WOVEN FABRIC:
Rotobox's unique technology enables combining chopped carbon fibers with woven fabric seamlessly in one-piece monocoque.

PENTAGON SHAPED HUB:
The hub is locked into the carbon part with pentagon shape for ultimate transmission of torque.

Description: Samco Sport 7 Piece OEM Replacement Silicone Radiator Coolant Hose Kit Kawasaki ZX 10R / RR / KRT / SE 2016 - 2020 KAW-79

SamcoSport is the original performance silicone hose brand which replaces your OEM factory rubber radiator hoses to a high quality silicone hose kit.
Handmade in the UK and comes with a Lifetime Warranty ensuring you have the highest quality cooling products fitted to your motorcycle.
OEM and RACE kits available for some models.
This specific model of Hose kits are usually stocked in blue, black, red and green.

Important Installation Note: We highly recommend purchasing the matching Samco Sport Hose Clamp Kit for your bike! Samco Hose Kits require the use of hose clamps without open adjustment windows as they will damage the Samco Hoses and void warranty.

Description: Radiator hose race kit, Be sure to add clamps too.

Description: SE Moto Carbon fiber tank shroud using Prepreg construction methods, formerly known as SE Composites. #MadeInUSA
Created for Rider Support And better racing Ergonomics along with tank protection.

Description: Sprint Filter P08 Kawasaki ZX-10R (16-21) 405306

Description: Suter Racing Suterclutch Kawasaki ZX10R / RR 2004-2021 004-18001


• First choice for more than 20 years in WSBK, MotoGP & MXGP championships
• The BTL (Back Torque Limiter) slipper clutch has been designed and developed to allow traction to be adjusted to accommodate different riding conditions. The Suter Clutch reduces the threat of over-revving the engine and maximizes the suspension performance.
• Quick off the start line due to a better clutch control
• Smoother braking phase over big bumps
• Less power required to operate the clutch
• Proven faster lap times
• More precise corner entry
• Higher corner speed
• Adjusted in conjunction with chassis and suspension set up the slipper clutch encourages smooth deceleration into corners and controlled acceleration out of corners.
• Anti hopping (basic principle): Prevents locking of the rear wheel during the coupling process and thus the loss of traction
• Produces a significantly softened braking phase before corners
• The Anti-hopping effect can be adjusted for every riding style; for tuned models, there is a range of harder main springs available to order. Included with delivery are all the relevant parts for installation, plus two additional Anti-hopping springs.
• The SuterClutch is highly impressive through its excellent responsiveness, the efficient inner lubrication, and its easy installation. The unique color of this clutch results from the hard-anodized Teflon coating, which considerably minimizes the wear on the friction surfaces.
• Fully adjustable to personal riding style
• There are two editions for the SuterClutch available: The MX-Line and the BTL-Line. Unlike the BTL-Line, the MX clutch comes without the anti-hopping mechanism.
• Through its ingenious design, you can fit it without any special installation tools. The pressure plate is installed using 6 bolts, allowing easy access for maintenance.
• Quick to install without special tools

Description: Suter Racing Swingarm Kawasaki ZX-10R 2016-2021 041-62040
The Suter swingarm boosts performance, gives more edge grip, confidence, and feel. Your bike will be faster and safer. It makes yours like a Factory one. The swingarm comes with all you need: Axis, mud-guard,etc.

Due to the modified design, a larger tire radius/diameter can be installed, and yet there are more adjustment possibilities! Also, the changed stiffness ensures better rideability of the motorcycle and more mechanical grip, especially when exiting the corner.

Note:

• Rear shock has to be modified for the use with this swingarm (lower fixing and length).
• Routing of the exhaust system has to be adapted to the new swingarm design. The exhaust is available as an additional part.
  
• For mounting the Suter Swingarm, the assembly kit is needed.

More confidence, more feel, more fun, faster, and safer!

Description: Teknofibra Extra Light Thermal Reflective Belly Pan Kit 30"x12"' .8mm Thickness 0121710638

-Comes with installation kit with Catalog with Install instructions Aluminum tape and an application tool.
-30" x 12"'
-.8mm Thickness
-Non Toxic material that reflects heat, flame, and insulates from sound.
-Used for Insulating fairings on Motorcycles, Cars, Aircraft and many other applications.

Description: TIGHTAILS KAWASAKI ZX10 11'+ SUBFRAME KAWZX10SUB-KAWZX1011BRA

Tightails is made for racing only. They are not designed for use with Street/OEM Bodywork. Tightails is made for race bodywork which do not have headlights, tail lights, mirrors, etc.

Description: TIGHTAILS KAWASAKI ZX10 16'+ REAR SUPPORT BRACKET KAWZX1016BRA

Tightails is made for racing only. They are not designed for use with Street/OEM Bodywork. Tightails is made for race bodywork which do not have headlights, tail lights, mirrors, etc.

Description: TIGHTAILS KAWASAKI ZX10 16'+ UPPER FAIRING STAY KAWZX1016UPP

Tightails is made for racing only. They are not designed for use with Street/OEM Bodywork. Tightails is made for race bodywork which do not have headlights, tail lights, mirrors, etc.

Description: This Is Not a rotor for the Light weight Seeker, It Is a Rotor for Professional Racers that need the rear to Work! Period.
Used for the Demands of Current Superbike and Moto2 racing where racers are using the rear brake not only to slow the bike into turns but to keep the bike from wheeling while exiting the turn and for holding the line they want.
For best use pair this rotor with the front rotors and one of our Front thumb brake set up or the even more popular left hand lever brake set up as seen on many of the GP bikes and superbikes this year!

This brake is not going to warp on you like some other rotors that are designed to reduce weight but also reduce braking performance.

Description: Translogic QSXi Quickshifter 2004+ Kawasaki ZX6R, ZX636R, ZX10R, & ZX12R TLS-QSXi-YK-DCS

1dn 5up or 1up 5dn road or race pattern

Kawasaki Quickshifter for ZX6R, ZX636R, ZX10R, & ZX12R models 2004 onwards with standard road shift or inverted race shift gear lever set-up QSXi Intellishift Quickshifter. Unique and powerful! Featuring our very latest superior Intellishift protocol providing the very best quickshifting possible. These advanced Intellishift quickshifters are the smallest multi-channel systems available and unlike other single channel quickshifters our latest range of Intellishift systems provide the finest MotoGP seamless shift simulation. Now with even more adjustment possibilities for professional users and throttle blipper output, its a winner!.

Description: ZX10R seat for Carbonin bodywork

Pictures are shown for reference only and may not accurately represent the exact model of your seat

Description: Replacement lower fairing