- Home »
- Catalog
HHR Performance » 2016, YZF-R1-R1M
Products for:
- Year: 2016
- Model: YZF-R1-R1M
View Universal items for: 2016 YZF-R1-R1M
Browse Products
Description:
Motoholders R1 15-19 FAIRING STAY WITH Fiberglass DUCT short
-Made for Racing, not street use.
-Made for Racing, not street use.
Item #: IY036003G
Condition:
New
Ships within 24-48 hours and ships directly from our supplier. Please note supply-chain related delays are possible.
Price: $255.00
Description:
MWR Fuel Filter For Yamaha R1/R1M (2015+) MWR-109
Not a copy of the standard air filter, always searching for solutions, either it’s the performance , protection or fitment . Caution: clean and re-oil at least once a year with MWR air filter oil & cleaner . Remapping the ECU or the Fuel Control Module is recommended
Not a copy of the standard air filter, always searching for solutions, either it’s the performance , protection or fitment . Caution: clean and re-oil at least once a year with MWR air filter oil & cleaner . Remapping the ECU or the Fuel Control Module is recommended
Item #: MWR-109
Condition:
New
Ships within 24-48 hours and ships directly from our supplier. Please note supply-chain related delays are possible.
Price: $33.95
Description:
MWR Performance HE & Race Filters For Yamaha YZF R1/ R1S / R1M (2015+) and FZ-10/MT-10 (2016+) MC-090-15 MC-090-15-R
Not a copy of the standard air filter, always searching for solutions, either it’s the performance , protection or fitment . Caution: clean and re-oil at least once a year with MWR air filter oil & cleaner . Remapping the ECU or the Fuel Control Module is recommended
Not a copy of the standard air filter, always searching for solutions, either it’s the performance , protection or fitment . Caution: clean and re-oil at least once a year with MWR air filter oil & cleaner . Remapping the ECU or the Fuel Control Module is recommended
Item #: MC-090-15
Condition:
New
Ships within 24-48 hours and ships directly from our supplier. Please note supply-chain related delays are possible.
Price: $94.95
Description:
MWR Racing WSBK Air Filter for the Yamaha YZF R1/ R1S / R1M (2015+) and FZ-10 (MT10) 2016+ MC-090-15/WSBK
Not a copy of the standard air filter, always searching for solutions, either it’s the performance , protection or fitment . Caution: clean and re-oil at least once a year with MWR air filter oil & cleaner . Remapping the ECU or the Fuel Control Module is recommended
Not a copy of the standard air filter, always searching for solutions, either it’s the performance , protection or fitment . Caution: clean and re-oil at least once a year with MWR air filter oil & cleaner . Remapping the ECU or the Fuel Control Module is recommended
Item #: MC-090-15/WSBK
Condition:
New
Limited Supply: Only 1 Left!
Ships within 24-48 hours and ships directly from our supplier. Please note supply-chain related delays are possible.
Price: $225.00
Description:
MWR Velocity Stacks for the Yamaha YZF R1 / R1S / R1M (2015-2019) MWR-VS-950
Not a copy of the standard air filter, always searching for solutions, either it’s the performance , protection or fitment . Caution: clean and re-oil at least once a year with MWR air filter oil & cleaner . Remapping the ECU or the Fuel Control Module is recommended
Not a copy of the standard air filter, always searching for solutions, either it’s the performance , protection or fitment . Caution: clean and re-oil at least once a year with MWR air filter oil & cleaner . Remapping the ECU or the Fuel Control Module is recommended
Item #: MWR-VS-950
Condition:
New
Ships within 24-48 hours and ships directly from our supplier. Please note supply-chain related delays are possible.
Price: $1,090.00
Description:
FGR 300 Extension kit
This kit extends the FGR 300 fork length from 750 mm to 770 mm. Making the fork more suitable for certain race bike set-ups. Kit contains longer outer tubes and a different top cap with preload adjuster.
Yamaha R1M Race kit
This kit optimizes the Yamaha R1M Öhlins Mechatronics suspension for race use. The kit contains length adjustable end-eye with a new shaft and piston for the Öhlins OEM shock as well as preload tubes for extending the fork stroke to 130 mm by removing internal spacers.
Honda CBR 1000RR SP
This kit optimizes the Honda CBR 1000RR SP Öhlins Mechatronics suspension for race use. The kit contains length adjustable end-eye for the Öhlins OEM shock as well as preload tubes for extending the fork stroke to 130mm by removing internal spacers.
This kit extends the FGR 300 fork length from 750 mm to 770 mm. Making the fork more suitable for certain race bike set-ups. Kit contains longer outer tubes and a different top cap with preload adjuster.
Yamaha R1M Race kit
This kit optimizes the Yamaha R1M Öhlins Mechatronics suspension for race use. The kit contains length adjustable end-eye with a new shaft and piston for the Öhlins OEM shock as well as preload tubes for extending the fork stroke to 130 mm by removing internal spacers.
Honda CBR 1000RR SP
This kit optimizes the Honda CBR 1000RR SP Öhlins Mechatronics suspension for race use. The kit contains length adjustable end-eye for the Öhlins OEM shock as well as preload tubes for extending the fork stroke to 130mm by removing internal spacers.
Item #: 22100-23
Condition:
New
On-hand inventory ships within 24 hours. Please note supply-chain related delays are possible. Please contact us for ETA
Price: $199.00
Description:
Thanks to the superior pressurized design and extremely tight manufacturing tolerances, the steering damper delivers supreme performance and agility, and with the wide adjustment range it is easy to find that perfectly weighted steering feel and feedback. Available as a bolt-on kit for most sport and hypersport models, there is also an assortment of universal models in different lengths and a wide range of mounting brackets and parts for race bikes as well as custom builders.
Item #: SD 043
Condition:
New
On-hand inventory ships within 24 hours. Please note supply-chain related delays are possible. Please contact us for ETA
Price: $449.00
Description:
Thanks to the superior pressurized design and extremely tight manufacturing tolerances, the steering damper delivers supreme performance and agility, and with the wide adjustment range it is easy to find that perfectly weighted steering feel and feedback. Available as a bolt-on kit for most sport and hypersport models, there is also an assortment of universal models in different lengths and a wide range of mounting brackets and parts for race bikes as well as custom builders.
Item #: SD 047
Condition:
New
On-hand inventory ships within 24 hours. Please note supply-chain related delays are possible. Please contact us for ETA
Price: $449.00
Drilled Oil drain Plug
Description:
Titanium Sump Bolt made from aircraft grade titanium 6AL-4V (grade 5) suitable to replace both grade 5 and grade 8 steel bolts. They are fitted with a magnetic steel stud to attract foreign metal particles to help protect your engine.
pre-drill the bolt heads for lock wiring if required for trackdays and racing.
40% Lighter than the original steel bolts and are corrosion resistant.
pre-drill the bolt heads for lock wiring if required for trackdays and racing.
40% Lighter than the original steel bolts and are corrosion resistant.
Item #: TISUMP1412MAGP
Condition:
New
Price: $21.08
Description:
This Kit includes
4 Racespec front fork Pinch Bolts 40mm in length in Titanium
4 Racespec Brake Caliper Bolts 70MM in Titanium
4 Racespec front fork Pinch Bolts 40mm in length in Titanium
4 Racespec Brake Caliper Bolts 70MM in Titanium
Item #: TISC840DR-TIFBMON190R-Kit
Condition:
New
If no inventory is listed above, please expect 2-to-3-day ETA from the manufacturer. Feel free to contact us if you have any questions.
Price: $165.56
Left Hand Brake
Description:
Qnium Radial Rear Left Hand Brake Master Cylinder 12mm
Many riders like to control the rear brake with their left hand. The Left Hand Brake gives riders optimum control over their rear brakes. The material use of the Qnium Radial Left Hand Brake is of sublime quality. Your fingers will give you a lot more feeling by braking than your foot. Qnium’s Left Hand Brake can help when you’re looking for fast lap times on the circuits. The brake feels better with your hand than with your feet. The brake can be operated with very little force. You will experience more control in the braking phase and when turning in the middle of the corner. With this radial left hand brake brake it is also possible to brake, when you steer your bike to the right and having a lean angle. For riders who want to keep the pedal brake as well as the Left Hand Brake, Qnium has also created rear brake master cylinders to compliment this setup, available with an extra banjo connection for a pass through design.
These high quality brake levers can be placed both above and below the lever of the clutch.
Used in Moto2, Moto3, and in other FIM world championships. Top Moto2 riders like Bo Bendsneyder, Thomas Luthi and Marcel Schrotter are using the Qnium Radial Left Hand Brake to get the best out of their races.
Made in Netherlands
Many riders like to control the rear brake with their left hand. The Left Hand Brake gives riders optimum control over their rear brakes. The material use of the Qnium Radial Left Hand Brake is of sublime quality. Your fingers will give you a lot more feeling by braking than your foot. Qnium’s Left Hand Brake can help when you’re looking for fast lap times on the circuits. The brake feels better with your hand than with your feet. The brake can be operated with very little force. You will experience more control in the braking phase and when turning in the middle of the corner. With this radial left hand brake brake it is also possible to brake, when you steer your bike to the right and having a lean angle. For riders who want to keep the pedal brake as well as the Left Hand Brake, Qnium has also created rear brake master cylinders to compliment this setup, available with an extra banjo connection for a pass through design.
These high quality brake levers can be placed both above and below the lever of the clutch.
Used in Moto2, Moto3, and in other FIM world championships. Top Moto2 riders like Bo Bendsneyder, Thomas Luthi and Marcel Schrotter are using the Qnium Radial Left Hand Brake to get the best out of their races.
Made in Netherlands
Item #: 104602
Condition:
New
On-hand inventory ships within 24 hours. No Returns on Clearance items all sales are final
Price: $742.00
Thumb Brake
Description:
Qnium Radial Rear Thumb Brake Master Cylinder 12mm
The Radial Thumb Brake from Qnium is one of the most optimized thumb brakes on the market for the rear wheel. As a rider you have a lot more feeling in your thumb than in your foot. The Qnium Radial Thumb Brake makes it easier to operate the rear brake in a very controlled way. This high-end thumb brake is very popular in the Moto3 class. A brake lever is not an option on these bikes, as Moto3 riders are required to use the clutch lever. When you mount the Rear Master from Qnium on your bike, you can continue to use your foot brake.
Used in Moto2, Moto3, and in other FIM world championships. Drivers like Tony Arbolino and Dennis Foggia managed to win Grand Prix races with the revolutionary Qnium Thumb Brake. In 2019 Lorenzo Dalla Porta also used the Qnium’s Radial Thumb Brake, when he became World Champion Moto3.
Made in The Netherlands
The Radial Thumb Brake from Qnium is one of the most optimized thumb brakes on the market for the rear wheel. As a rider you have a lot more feeling in your thumb than in your foot. The Qnium Radial Thumb Brake makes it easier to operate the rear brake in a very controlled way. This high-end thumb brake is very popular in the Moto3 class. A brake lever is not an option on these bikes, as Moto3 riders are required to use the clutch lever. When you mount the Rear Master from Qnium on your bike, you can continue to use your foot brake.
Used in Moto2, Moto3, and in other FIM world championships. Drivers like Tony Arbolino and Dennis Foggia managed to win Grand Prix races with the revolutionary Qnium Thumb Brake. In 2019 Lorenzo Dalla Porta also used the Qnium’s Radial Thumb Brake, when he became World Champion Moto3.
Made in The Netherlands
Item #: 106977
Condition:
New
Limited Supply: Only 1 Left!
On-hand inventory ships within 24 hours. Due to material shortages we have been seeing up to 6 weeks on resupply. We try to keep this product in
stock so grab it while we have it. Orders placed will be allocated
to incomming stock.
Price: $799.00
Description:
*NEW Rotobox Bullet Forged Carbon Fiber Front Wheel Size 17"X 3.5"
Rotobox has extended its carbon motorcycle wheel product line by unveiling the Rotobox Bullet, the new thin spoke, ultra-light forged carbon wheel at EICMA. Rotobox is one of the leading companies in the development of lightweight high-performance carbon automotive wheels. It is also a company not satisfied with just keeping up with trends but setting them.
The wheels conform to safety standard JASO T203-85 for JWL dotE Certification. Before riding on public streets, be sure to check your local regulations.
Rotobox has extended its carbon motorcycle wheel product line by unveiling the Rotobox Bullet, the new thin spoke, ultra-light forged carbon wheel at EICMA. Rotobox is one of the leading companies in the development of lightweight high-performance carbon automotive wheels. It is also a company not satisfied with just keeping up with trends but setting them.
The wheels conform to safety standard JASO T203-85 for JWL dotE Certification. Before riding on public streets, be sure to check your local regulations.
Item #: F70350B325
Condition:
New
Custom Product: Rotobox Products are made to order with an estimated completion time of 10-12 weeks from order placed. Delivery time is longer since we
have entered into a new industrial partnership with MV Agusta motorcycle manufacturer for the supply of wheels for original equipment on the new MV Agusta
Brutale 1000RR Assen! Although we have expanded our production capacity, we are also forced to extending the delivery time for the new orders.
Please feel free to contact us for any questions.
Free Ground Shipping
Price: $1,934.00
Description:
*NEW Rotobox Bullet Forged Carbon Fiber Rear Wheel Size 17"X 6"
REAR WHEEL Weight
4.06 kg (8.95 lbs)
Includes Sprocket Carrier and Cush Drive Rubbers
Rotobox has extended its carbon motorcycle wheel product line by unveiling the Rotobox Bullet, the new thin spoke, ultra-light forged carbon wheel at EICMA. Rotobox is one of the leading companies in the development of lightweight high-performance carbon automotive wheels. It is also a company not satisfied with just keeping up with trends but setting them.
The wheels conform to safety standard JASO T203-85 for JWL dotE Certification. Before riding on public streets, be sure to check your local regulations.
UV PROTECTIVE COATING:
The carbon cast is protected from radiation with a very thin layer of special clear UV protective coating. Together with the clear and smooth rim surface it ensures the wheel a zero notch effect.
HIGH QUALITY CENTER PARTS:
For each motorcycle model the hubs are CNC machined from high quality 7075 T6 aluminum alloy used in the aviation industry, anodized into optional color and permanently assembled to the carbon rim.
SOLID THIN SPOKES:
To create solid thin spokes we use special carbon fiber yarn developed for military use.
THREE-COMPONENT-COMPOSITE:
Produced using Rotobox's unique 3 component composite - combining carbon, epoxy and stainless steel. The stainless 2,5 mm steel wire is integrated in each side of the rim increasing its impact resistance at the most critical outer part.
Titanium Hex Head Bolts M10x1.5x25mm:
Made from Aircraft Spec Grade 5 Titanium Alloy. Special high performance design by Rotobox. Precision machined with rolled threads and completely corrosion free. Excellent durability and minimum weight, 45% lighter than steel equivalents. Available optionally with the wheels.
CHOPPED CARBON FIBERS MEETS WOVEN FABRIC:
Rotobox's unique technology enables combining chopped carbon fibers with woven fabric seamlessly in one-piece monocoque.
PENTAGON SHAPED HUB:
The hub is locked into the carbon part with pentagon shape for ultimate transmission of torque.
REAR WHEEL Weight
4.06 kg (8.95 lbs)
Includes Sprocket Carrier and Cush Drive Rubbers
Rotobox has extended its carbon motorcycle wheel product line by unveiling the Rotobox Bullet, the new thin spoke, ultra-light forged carbon wheel at EICMA. Rotobox is one of the leading companies in the development of lightweight high-performance carbon automotive wheels. It is also a company not satisfied with just keeping up with trends but setting them.
The wheels conform to safety standard JASO T203-85 for JWL dotE Certification. Before riding on public streets, be sure to check your local regulations.
UV PROTECTIVE COATING:
The carbon cast is protected from radiation with a very thin layer of special clear UV protective coating. Together with the clear and smooth rim surface it ensures the wheel a zero notch effect.
HIGH QUALITY CENTER PARTS:
For each motorcycle model the hubs are CNC machined from high quality 7075 T6 aluminum alloy used in the aviation industry, anodized into optional color and permanently assembled to the carbon rim.
SOLID THIN SPOKES:
To create solid thin spokes we use special carbon fiber yarn developed for military use.
THREE-COMPONENT-COMPOSITE:
Produced using Rotobox's unique 3 component composite - combining carbon, epoxy and stainless steel. The stainless 2,5 mm steel wire is integrated in each side of the rim increasing its impact resistance at the most critical outer part.
Titanium Hex Head Bolts M10x1.5x25mm:
Made from Aircraft Spec Grade 5 Titanium Alloy. Special high performance design by Rotobox. Precision machined with rolled threads and completely corrosion free. Excellent durability and minimum weight, 45% lighter than steel equivalents. Available optionally with the wheels.
CHOPPED CARBON FIBERS MEETS WOVEN FABRIC:
Rotobox's unique technology enables combining chopped carbon fibers with woven fabric seamlessly in one-piece monocoque.
PENTAGON SHAPED HUB:
The hub is locked into the carbon part with pentagon shape for ultimate transmission of torque.
Item #: R70600B727
Condition:
New
Custom Product: Rotobox Products are made to order with an estimated completion time of 10-12 weeks from order placed. Delivery time is longer since we
have entered into a new industrial partnership with MV Agusta motorcycle manufacturer for the supply of wheels for original equipment on the new MV Agusta
Brutale 1000RR Assen! Although we have expanded our production capacity, we are also forced to extending the delivery time for the new orders.
Please feel free to contact us for any questions.
Free Ground Shipping
Price: $2,617.00
ROTOBOX Bullet Wheel Covers
Description:
Rotobox wheel covers kit is a two-piece upgrade accessory designed for 17 inch Rotobox Bullet Rear carbon wheel. These carbon fiber covers are easy to install and compatible with rear Bullet wheel for motorcycles with dual sided swingarm. The covers are designed to fit inside the wheel, and clear the hub and brake. One also has a cut out for the valve stem. They are held in place with five mounting screws.
Item #: Bullet Cover
Condition:
New
Custom Product: Rotobox Products are made to order with an estimated completion time of 10-12 weeks from order placed. Delivery time is longer since we
have entered into a new industrial partnership with MV Agusta motorcycle manufacturer for the supply of wheels for original equipment on the new MV Agusta
Brutale 1000RR Assen! Although we have expanded our production capacity, we are also forced to extending the delivery time for the new orders.
Please feel free to contact us for any questions.
Price: $800.00
Description:
Samco Sport 3 Piece Silicone Radiator Coolant Hose Kit Yamaha FZ 10 | MT-10 | MT-10 SP | MT-10 Tourer Edition | YZF R1 | YZF R1M YAM-70
SamcoSport is the original performance silicone hose brand which replaces your OEM factory rubber radiator hoses to a high quality silicone hose kit.
Handmade in the UK and comes with a Lifetime Warranty ensuring you have the highest quality cooling products fitted to your motorcycle.
OEM and RACE kits available for some models.
This specific model of Hose kits are usually stocked in blue, black, yellow and red.
Important Installation Note: We highly recommend purchasing the matching Samco Sport Hose Clamp Kit for your bike! Samco Hose Kits require the use of hose clamps without open adjustment windows as they will damage the Samco Hoses and void warranty.
SamcoSport is the original performance silicone hose brand which replaces your OEM factory rubber radiator hoses to a high quality silicone hose kit.
Handmade in the UK and comes with a Lifetime Warranty ensuring you have the highest quality cooling products fitted to your motorcycle.
OEM and RACE kits available for some models.
This specific model of Hose kits are usually stocked in blue, black, yellow and red.
Important Installation Note: We highly recommend purchasing the matching Samco Sport Hose Clamp Kit for your bike! Samco Hose Kits require the use of hose clamps without open adjustment windows as they will damage the Samco Hoses and void warranty.
Item #: YAM-70
Condition:
New
Samco Items Ship within 24-48hrs Special order colors are made to
order with an 6–8-week ETA
Price: $123.95
Description:
SE Moto Carbon fiber tank shroud using Prepreg construction methods, formerly known as SE Composites. #MadeInUSA
Created for Rider Support And better racing Ergonomics along with tank protection.
Created for Rider Support And better racing Ergonomics along with tank protection.
Item #: SEYR115TCV2
Condition:
New
Ships within 24-48 hours and ships directly from our supplier. Please note supply-chain related delays are possible.
Price: $385.00
Description:
SPARE side for Avio Fibre Left Side Panel With Oem Ecu 15-19 Yamaha YZF-R1
Item #: Y16231AF OEM CO
Condition:
New
Limited Supply: Only 1 Left!
In Stock inventory ships within 24 hours. Avio Fiber has a typical eta of 4-6 weeks, Carbon Fiber can take up to 8 weeks due to production times. Please note supply-chain related delays are possible.
Price: $47.25
Description:
Sprint Filter P08 YZF-R1/M (15-20) and YZF-R1S (16-18) 405254
Item #: 405254
Condition:
New
Ships within 24-48 hours and ships directly from our supplier. Please note supply-chain related delays are possible.
Price: $115.97
Description:
Sprint Filter P16 Yamaha YZF R1 (15-) Factory Kit Race Use 405361
Item #: 405361
Condition:
New
Ships within 24-48 hours and ships directly from our supplier. Please note supply-chain related delays are possible.
Price: $649.00
Description:
Sprint Filter P08 F1-85 YZF-R1/M (15-20) YZF-R1S
Reinforced polyurethane frame to aid installation
Single layer waterproof polyester
P08 F1-85 material currently used in MotoGP and WSBK
Highest existing permeability of any air filter on the market
Innovative polyester material allows for consistent airflow
Steel wire mesh with epoxy varnish finish
Patented PTFE (Teflon™) treatment creates a waterproof barrier
Optimized filter surface area provides more airflow, more power and more filtration
Increased air permeability and filtration efficiency when compared to cotton air filters
Airflow: 15,000 l/m2/sec. / Filtration: 85?m
Can be cleaned using only compressed air
Dry filter, no oil treatments required
Direct OEM replacement
1 year warranty
Reinforced polyurethane frame to aid installation
Single layer waterproof polyester
P08 F1-85 material currently used in MotoGP and WSBK
Highest existing permeability of any air filter on the market
Innovative polyester material allows for consistent airflow
Steel wire mesh with epoxy varnish finish
Patented PTFE (Teflon™) treatment creates a waterproof barrier
Optimized filter surface area provides more airflow, more power and more filtration
Increased air permeability and filtration efficiency when compared to cotton air filters
Airflow: 15,000 l/m2/sec. / Filtration: 85?m
Can be cleaned using only compressed air
Dry filter, no oil treatments required
Direct OEM replacement
1 year warranty
Item #: 403572
Condition:
New
Ships within 24-48 hours and ships directly from our supplier. Please note supply-chain related delays are possible.
Price: $249.00
Description:
Suter Racing Suterclutch Yamaha R1 / R1M / MT-10 2015-2021 004-15008
• First choice for more than 20 years in WSBK, MotoGP & MXGP championships
• The BTL (Back Torque Limiter) slipper clutch has been designed and developed to allow traction to be adjusted to accommodate different riding conditions. The Suter Clutch reduces the threat of over-revving the engine and maximizes the suspension performance.
• Quick off the start line due to a better clutch control
• Smoother braking phase over big bumps
• Less power required to operate the clutch
• Proven faster lap times
• More precise corner entry
• Higher corner speed
• Adjusted in conjunction with chassis and suspension set up the slipper clutch encourages smooth deceleration into corners and controlled acceleration out of corners.
• Anti hopping (basic principle): Prevents locking of the rear wheel during the coupling process and thus the loss of traction
• Produces a significantly softened braking phase before corners
• The Anti-hopping effect can be adjusted for every riding style; for tuned models, there is a range of harder main springs available to order. Included with delivery are all the relevant parts for installation, plus two additional Anti-hopping springs.
• The SuterClutch is highly impressive through its excellent responsiveness, the efficient inner lubrication, and its easy installation. The unique color of this clutch results from the hard-anodized Teflon coating, which considerably minimizes the wear on the friction surfaces.
• Fully adjustable to personal riding style
• There are two editions for the SuterClutch available: The MX-Line and the BTL-Line. Unlike the BTL-Line, the MX clutch comes without the anti-hopping mechanism.
• Through its ingenious design, you can fit it without any special installation tools. The pressure plate is installed using 6 bolts, allowing easy access for maintenance.
• Quick to install without special tools
• First choice for more than 20 years in WSBK, MotoGP & MXGP championships
• The BTL (Back Torque Limiter) slipper clutch has been designed and developed to allow traction to be adjusted to accommodate different riding conditions. The Suter Clutch reduces the threat of over-revving the engine and maximizes the suspension performance.
• Quick off the start line due to a better clutch control
• Smoother braking phase over big bumps
• Less power required to operate the clutch
• Proven faster lap times
• More precise corner entry
• Higher corner speed
• Adjusted in conjunction with chassis and suspension set up the slipper clutch encourages smooth deceleration into corners and controlled acceleration out of corners.
• Anti hopping (basic principle): Prevents locking of the rear wheel during the coupling process and thus the loss of traction
• Produces a significantly softened braking phase before corners
• The Anti-hopping effect can be adjusted for every riding style; for tuned models, there is a range of harder main springs available to order. Included with delivery are all the relevant parts for installation, plus two additional Anti-hopping springs.
• The SuterClutch is highly impressive through its excellent responsiveness, the efficient inner lubrication, and its easy installation. The unique color of this clutch results from the hard-anodized Teflon coating, which considerably minimizes the wear on the friction surfaces.
• Fully adjustable to personal riding style
• There are two editions for the SuterClutch available: The MX-Line and the BTL-Line. Unlike the BTL-Line, the MX clutch comes without the anti-hopping mechanism.
• Through its ingenious design, you can fit it without any special installation tools. The pressure plate is installed using 6 bolts, allowing easy access for maintenance.
• Quick to install without special tools
Item #: 004-15008
Condition:
New
Limited Supply: Only 1 Left!
On-hand inventory ships within 24 hours. When out of stock Please expect a 1 to-2-week ETA from manufacturer. Please feel free to contact us for any questions.
Price: $1,050.00
Sale: $945.00
Save: 10%
Save: $105.00
R1 Suter Swingarm
Description:
Suter Racing Swingarm Yamaha R1 / R1M 2016-2021 041-62063
The Suter swingarm boosts performance, gives more edge grip, confidence, and feel. Your bike will be faster and safer. It makes yours like a Factory one. The swingarm comes with all you need: Axis, mud-guard,etc.
The Suter swingarm boosts performance, gives more edge grip, confidence, and feel. Your bike will be faster and safer. It makes yours like a Factory one. The swingarm comes with all you need: Axis, mud-guard,etc.
Due to the modified design, a larger tire radius/diameter can be installed, and yet there are more adjustment possibilities! Also, the changed stiffness ensures better rideability of the motorcycle and more mechanical grip, especially when exiting the corner.
Note:
- Rear shock has to be modified for the use with this swingarm (lower fixing and length).
- Routing of the exhaust system has to be adapted to the new swingarm design. The exhaust is available as an additional part.
- For mounting the Suter Swingarm, the assembly kit is needed.
More confidence, more feel, more fun, faster, and safer!
Item #: 041-62063
Condition:
New
Special Order Item Please expect a 1 to-2-week ETA from manufacturer. Please feel free to contact us for any questions.
Price: $9,999.00
Description:
Techspec GRIPSTER C3 SEAT PAD YAMAHA R1, (15-19) CARBONIN SHORT; INCLUDES 3 TAIL PADS 62-5030-C3
Exclusively created by Techspec for Carbonin Bodywork Tail units!
Exclusively created by Techspec for Carbonin Bodywork Tail units!
Item #: 62-5030-C3
Condition:
New
Ships within 24-48 hours and ships directly from our supplier. Please note supply-chain related delays are possible.
Price: $89.95
R1 tank grip
Description:
Left -Right Tank Grips And Center Tank Pro 11 Only. This product is made in our Aggressive Adhesive.
Item #: 62-4021-XL2
Condition:
New
Limited Supply: Only 2 Left!
Ships within 24-48 hours and ships directly from our supplier. Please note supply-chain related delays are possible.
Price: $49.95
Description:
Teknofibra Extra Light Thermal Reflective Belly Pan Kit 30"x12"' .8mm Thickness 0121710638
-Comes with installation kit with Catalog with Install instructions Aluminum tape and an application tool.
-30" x 12"'
-.8mm Thickness
-Non Toxic material that reflects heat, flame, and insulates from sound.
-Used for Insulating fairings on Motorcycles, Cars, Aircraft and many other applications.
-Comes with installation kit with Catalog with Install instructions Aluminum tape and an application tool.
-30" x 12"'
-.8mm Thickness
-Non Toxic material that reflects heat, flame, and insulates from sound.
-Used for Insulating fairings on Motorcycles, Cars, Aircraft and many other applications.
Item #: 0121710638
Condition:
New
On-hand inventory ships within 24 hours, When out of stock Please expect a 2-to-4-week ETA from manufacturer. Please feel free to contact us for any
questions.
Price: $79.38
Heat Shield
Description:
Teknofibra Heat shield material is designed to keep any radiant temperature from the engine or exhaust from heating up the fuel in the tank.
Cooler fuel = better performance.
Heat is the enemy when it comes to robbing power.
Its not just only the water temperature that you need to keep cool for optimum performance, Keeping your fuel cool produces the best power and why spend that extra money on race fuel if it is not staying cool.
Ever wonder why teams keep their fuel in fridges or on ice? add it at the last minute? Not to mention when it heats up it expands and it could be the difference of fitting that last 1/8th of a gallon in to finish that race!
These kits come pre cut to fit your model motorcycle , all you need to do is remove any factory heat sheild material clean with a degreaser and install your Teknofibra material , It really is simple.
This material is thinner and lighter than the material that comes from the factory which is a mineral based fiber.
Teknofibra is unlike anything else and will not burn or catch fire, it is non toxic and has proven to keep fuel temps up to 48degrees F cooler than oem material
Technical partner of JIR, Teknofibra® has long been known in the industry and used by prestigious Moto2, World Superbike, CIV and many others teams, for the following applications:
Protection of fairing and belly positioned in close proximity of the exhaust pipes.
Interposed between air box and throttle body allows the aspiration of cold air.
Glued under the tank keeps the lower the fuel temperature.
It maintains a stable temperature of the gas /oil on the nitrogen tank bladder of the dampers installed near the exhaust pipes.
Protects the battery and wiring avoiding problems to the ECU.
Protection of electronic components in hot areas.
Under the saddle and the cowl cover It protects the rider from the heat transmitted from the engine and the exhaust system.
More generally, to solve any problem of heat.
2015-19 20-21 yamaha R1M Yamaha R1 R1M MT-10
Teknofibra Heat shield material is designed to keep any radiant temperature from the engine or exhaust from heating up the fuel in the tank.
Cooler fuel = better performance.
Heat is the enemy when it comes to robbing power.
Its not just only the water temperature that you need to keep cool for optimum performance, Keeping your fuel cool produces the best power and why spend that extra money on race fuel if it is not staying cool.
Ever wonder why teams keep their fuel in fridges or on ice? add it at the last minute? Not to mention when it heats up it expands and it could be the difference of fitting that last 1/8th of a gallon in to finish that race!
These kits come pre cut to fit your model motorcycle , all you need to do is remove any factory heat sheild material clean with a degreaser and install your Teknofibra material , It really is simple.
This material is thinner and lighter than the material that comes from the factory which is a mineral based fiber.
Teknofibra is unlike anything else and will not burn or catch fire, it is non toxic and has proven to keep fuel temps up to 48degrees F cooler than oem material
Technical partner of JIR, Teknofibra® has long been known in the industry and used by prestigious Moto2, World Superbike, CIV and many others teams, for the following applications:
Protection of fairing and belly positioned in close proximity of the exhaust pipes.
Interposed between air box and throttle body allows the aspiration of cold air.
Glued under the tank keeps the lower the fuel temperature.
It maintains a stable temperature of the gas /oil on the nitrogen tank bladder of the dampers installed near the exhaust pipes.
Protects the battery and wiring avoiding problems to the ECU.
Protection of electronic components in hot areas.
Under the saddle and the cowl cover It protects the rider from the heat transmitted from the engine and the exhaust system.
More generally, to solve any problem of heat.
Item #: 400103001
Condition:
New
Limited Supply: Only 5 Left!
On-hand inventory ships within 24 hours, When out of stock Please expect a 2-to-4-week ETA from manufacturer. Please feel free to contact us for any questions.
Price: $173.25
Description:
TIGHTAILS YAMAHA R1 15'+ REAR SUPPORT BRACKET YAMR15RSBL
Tightails is made for racing only. They are not designed for use with Street/OEM Bodywork. Tightails is made for race bodywork which do not have headlights, tail lights, mirrors, etc.
Tightails is made for racing only. They are not designed for use with Street/OEM Bodywork. Tightails is made for race bodywork which do not have headlights, tail lights, mirrors, etc.
Item #: YAMR15RSB
Condition:
New
Ships within 24-48 hours and ships directly from our supplier. Please note supply-chain related delays are possible.
Price: $33.00
Description:
TIGHTAILS YAMAHA R1 15'+ SUBFRAME YAMR115SUB
Tightails is made for racing only. They are not designed for use with Street/OEM Bodywork. Tightails is made for race bodywork which do not have headlights, tail lights, mirrors, etc.
Tightails is made for racing only. They are not designed for use with Street/OEM Bodywork. Tightails is made for race bodywork which do not have headlights, tail lights, mirrors, etc.
Item #: YAMR115SUB
Condition:
New
Ships within 24-48 hours and ships directly from our supplier. Please note supply-chain related delays are possible.
Price: $473.00
Description:
TIGHTAILS YAMAHA R1 15'+ SUBFRAME TRAY YAMR115TRA
Tightails is made for racing only. They are not designed for use with Street/OEM Bodywork. Tightails is made for race bodywork which do not have headlights, tail lights, mirrors, etc.
Tightails is made for racing only. They are not designed for use with Street/OEM Bodywork. Tightails is made for race bodywork which do not have headlights, tail lights, mirrors, etc.
Item #: YAMR115TRA
Condition:
New
Ships within 24-48 hours and ships directly from our supplier. Please note supply-chain related delays are possible.
Price: $24.20
Description:
TIGHTAILS YAMAHA R1 15'+ UPPER FAIRING STAY YAMR115UPP
Tightails is made for racing only. They are not designed for use with Street/OEM Bodywork. Tightails is made for race bodywork which do not have headlights, tail lights, mirrors, etc.
Tightails is made for racing only. They are not designed for use with Street/OEM Bodywork. Tightails is made for race bodywork which do not have headlights, tail lights, mirrors, etc.
Item #: YAMR115UPP
Condition:
New
Ships within 24-48 hours and ships directly from our supplier. Please note supply-chain related delays are possible.
Price: $165.00
R1 R6 TK Brake Rotors
Description:
TK Dischi Evo 320mm x 5.75mm Ventilated Floating Rotors for Competition use only to fit Yamaha R1/M wheels from 2015 to 2022
FIM Approved
These can be used on the 2021 YZF-R7 as an oversized rotor but will require caliper spacers
-Bobbin-less
-Exclusive Carrier Technology
-More Arms than any other leading competitor
-5.75mm thickness
-This would be the correct fit for Aftermarket wheels such as Rotobox Dymag or OZ wheels.
-Sold as a set Left and Right
-Hand-crafted from Billet Metal
-Better Cooling
-Increased braking modulation
-Excellent pad cleaning
-Reduced residual torque
-Improved safety
If you are using different calipers that require a Narrow Band Rotor please let us know when ordering so we can make sure you receive the correct size for your brake set up. Ie some Brembo Calipers use a Narrow Pad
If your using the oem Brembo this rotor application is correct
FIM Approved
These can be used on the 2021 YZF-R7 as an oversized rotor but will require caliper spacers
-Bobbin-less
-Exclusive Carrier Technology
-More Arms than any other leading competitor
-5.75mm thickness
-This would be the correct fit for Aftermarket wheels such as Rotobox Dymag or OZ wheels.
-Sold as a set Left and Right
-Hand-crafted from Billet Metal
-Better Cooling
-Increased braking modulation
-Excellent pad cleaning
-Reduced residual torque
-Improved safety
If you are using different calipers that require a Narrow Band Rotor please let us know when ordering so we can make sure you receive the correct size for your brake set up. Ie some Brembo Calipers use a Narrow Pad
If your using the oem Brembo this rotor application is correct
Item #: Y05E
Condition:
New
Limited Supply: Only 1 Left!
On-hand inventory ships within 24 hours. please expect a 4 week ETA from manufacturer when out of stock. All Custom color and narrow band options have
a 4-6 week eta
Price: $1,050.00
TK Rear Rotor
Description:
This Is Not a rotor for the Light weight Seeker, It Is a Rotor for Professional Racers that need the rear to Work! Period.
Used for the Demands of Current Superbike and Moto2 racing where racers are using the rear brake not only to slow the bike into turns but to keep the bike from wheeling while exiting the turn and for holding the line they want.
For best use pair this rotor with the front rotors and one of our Front thumb brake set up or the even more popular left hand lever brake set up as seen on many of the GP bikes and superbikes this year!
This brake is not going to warp on you like some other rotors that are designed to reduce weight but also reduce braking performance.
Used for the Demands of Current Superbike and Moto2 racing where racers are using the rear brake not only to slow the bike into turns but to keep the bike from wheeling while exiting the turn and for holding the line they want.
For best use pair this rotor with the front rotors and one of our Front thumb brake set up or the even more popular left hand lever brake set up as seen on many of the GP bikes and superbikes this year!
This brake is not going to warp on you like some other rotors that are designed to reduce weight but also reduce braking performance.
Item #: Y05P
Condition:
New
On-hand inventory ships within 24 hours. please expect a 4 week ETA from manufacturer when out of stock. All Custom color and narrow band options have
a 4-6 week eta
Price: $262.50
Description:
Translogic Blip Assist ECU 2015-2019 Yamaha R1 TLS-BA4.1-R1-ECU
Yamaha Blip Assist ECU for R1 models 2015 to 2019. Plug&Play ECU. (includes ECU and pit lane warm up button assembly only, will need a TLS-iS4-DCS or TLS-QSXi-YK-DCS system installed as well )
This new state-of-the-art Throttle Blipper system or Down Shifter is designed to compliment Translogic's Intellishift DCS, QSXi, QSX Quckshifter systems and Powershift systems. The Blip Assist ECU interfaces with the engines throttle body connectors via the plug&play connectors. During down shifts either Translogic's DCS sensor or Powershifter ECU sends a signal to the Blip Assist ECU which then performs a controlled throttle blip depending on riding conditions at the time of the down shift.
The exciting NEW pit lane warm up feature incorporated into these state-of-the-art throttle blipper systems is activated by an anodised billet aluminium handle bar mounted bracket encapsulating a single sealed tactile button featuring gold plated contacts for precise operation.
Fully adjustable and adaptive. The strength/duration of the throttle blip can be adjusted using Translogic's Pro-Tuner-Mode (No PC is necessary). The sensor trigger force can be adjusted too as well as the intensity of the blip itself in 5 different RPM bands. There are default settings within the Blip Assist ECU thanks to the hundreds of hours of real world testing carried out by Translogic Systems and it's professional partners giving you a great head start when first experiencing this new technology.
Item #: TLS-BA4.1-R1-ECU
Condition:
New
Translogic- On-hand inventory ships within 24 hours: We order Directly from Translogic once per month. When out of stock Please expect a 1 to-2-week ETA from manufacturer. Supply-chain related delays are possible.
Price: $345.00
Description:
Translogic Blip Assist System 2015-2017 Yamaha R1 TLS-BA4.1-R1-DCS
1dn 5up or 1up 5dn road or race pattern
Yamaha Blip Assist System for R1 models 2015 to 2017 with Yamaha Quickshifter wiring. Plug&Play system. (includes ECU, DCS sensor, tie rod kit and pit lane warm up button assembly)This new state-of-the-art Throttle Blipper system or Down Shifter is designed to compliment Translogic's Intellishift DCS, QSXi, QSX Quckshifter systems and Powershift systems. The Blip Assist ECU interfaces with the engines throttle body connectors via the plug&play connectors. During down shifts either Translogic's DCS sensor or Powershifter ECU sends a signal to the Blip Assist ECU which then performs a controlled throttle blip depending on riding conditions at the time of the down shift.
The exciting NEW pit lane warm up feature incorporated into these state-of-the-art throttle blipper systems is activated by an anodised billet aluminium handle bar mounted bracket encapsulating a single sealed tactile button featuring gold plated contacts for precise operation.
Fully adjustable and adaptive. The strength/duration of the throttle blip can be adjusted using Translogic's Pro-Tuner-Mode (No PC is necessary). The sensor trigger force can be adjusted too as well as the intensity of the blip itself in 5 different RPM bands. There are default settings within the Blip Assist ECU thanks to the hundreds of hours of real world testing carried out by Translogic Systems and it's professional partners giving you a great head start when first experiencing this new technology.
Item #: TLS-BA4.1-R1-DCS
Condition:
New
Translogic- On-hand inventory ships within 24 hours: We order Directly from Translogic once per month. When out of stock Please expect a 1 to-2-week ETA from manufacturer. Supply-chain related delays are possible.
Price: $530.00
Description:
Translogic QSXi Quickshifter 2010 onwards Yamaha R1 TLS-QSXi-YK-DCS
1dn 5up or 1up 5dn road or race pattern
Yamaha Quickshifter for R1 models 2010 onwards with standard road shift or inverted race shift gear lever set-up QSXi Intellishift Quickshifter. Unique and powerful! Featuring our very latest superior Intellishift protocol providing the very best quickshifting possible. These advanced Intellishift quickshifters are the smallest multi-channel systems available and unlike other single channel quickshifters our latest range of Intellishift systems provide the finest MotoGP seamless shift simulation. Now with even more adjustment possibilities for professional users and throttle blipper output, its a winner!.Item #: TLS-QSXi-YK-DCS
Condition:
New
Translogic- On-hand inventory ships within 24 hours: We order Directly from Translogic once per month. When out of stock Please expect a 1 to-2-week ETA from manufacturer. Supply-chain related delays are possible.
Price: $479.00
Description:
Translogic Replacement Quickshifter DCS sensor 2015-2017 Yamaha R1 TLS-DCS-R1-TRK
1dn 5up or 1up 5dn road or race pattern
Yamaha replacement Quickshifter DCS sensor for R1 models 2015 to 2017 featuring the standard OEM Quickshifter sensor wiring with standard road shift or inverted race shift set-up (includes tie rod kit)Item #: TLS-DCS-R1-TRK
Condition:
New
Translogic- On-hand inventory ships within 24 hours: We order Directly from Translogic once per month. When out of stock Please expect a 1 to-2-week ETA from manufacturer. Supply-chain related delays are possible.
Price: $289.00