- Home »
- Catalog
HHR Performance » S1000RR/HP4
Products for:
- Model: S1000RR/HP4
View Universal items for: S1000RR/HP4
Browse Products
Description:
Suter Racing Suterclutch BMW S1000RR 2013-20 004-44007
• First choice for more than 20 years in WSBK, MotoGP & MXGP championships
• The BTL (Back Torque Limiter) slipper clutch has been designed and developed to allow traction to be adjusted to accommodate different riding conditions. The Suter Clutch reduces the threat of over-revving the engine and maximizes the suspension performance.
• Quick off the start line due to a better clutch control
• Smoother braking phase over big bumps
• Less power required to operate the clutch
• Proven faster lap times
• More precise corner entry
• Higher corner speed
• Adjusted in conjunction with chassis and suspension set up the slipper clutch encourages smooth deceleration into corners and controlled acceleration out of corners.
• Anti hopping (basic principle): Prevents locking of the rear wheel during the coupling process and thus the loss of traction
• Produces a significantly softened braking phase before corners
• The Anti-hopping effect can be adjusted for every riding style; for tuned models, there is a range of harder main springs available to order. Included with delivery are all the relevant parts for installation, plus two additional Anti-hopping springs.
• The SuterClutch is highly impressive through its excellent responsiveness, the efficient inner lubrication, and its easy installation. The unique color of this clutch results from the hard-anodized Teflon coating, which considerably minimizes the wear on the friction surfaces.
• Fully adjustable to personal riding style
• There are two editions for the SuterClutch available: The MX-Line and the BTL-Line. Unlike the BTL-Line, the MX clutch comes without the anti-hopping mechanism.
• Through its ingenious design, you can fit it without any special installation tools. The pressure plate is installed using 6 bolts, allowing easy access for maintenance.
• Quick to install without special tools
• First choice for more than 20 years in WSBK, MotoGP & MXGP championships
• The BTL (Back Torque Limiter) slipper clutch has been designed and developed to allow traction to be adjusted to accommodate different riding conditions. The Suter Clutch reduces the threat of over-revving the engine and maximizes the suspension performance.
• Quick off the start line due to a better clutch control
• Smoother braking phase over big bumps
• Less power required to operate the clutch
• Proven faster lap times
• More precise corner entry
• Higher corner speed
• Adjusted in conjunction with chassis and suspension set up the slipper clutch encourages smooth deceleration into corners and controlled acceleration out of corners.
• Anti hopping (basic principle): Prevents locking of the rear wheel during the coupling process and thus the loss of traction
• Produces a significantly softened braking phase before corners
• The Anti-hopping effect can be adjusted for every riding style; for tuned models, there is a range of harder main springs available to order. Included with delivery are all the relevant parts for installation, plus two additional Anti-hopping springs.
• The SuterClutch is highly impressive through its excellent responsiveness, the efficient inner lubrication, and its easy installation. The unique color of this clutch results from the hard-anodized Teflon coating, which considerably minimizes the wear on the friction surfaces.
• Fully adjustable to personal riding style
• There are two editions for the SuterClutch available: The MX-Line and the BTL-Line. Unlike the BTL-Line, the MX clutch comes without the anti-hopping mechanism.
• Through its ingenious design, you can fit it without any special installation tools. The pressure plate is installed using 6 bolts, allowing easy access for maintenance.
• Quick to install without special tools
Item #: 004-44007
Condition:
New
On-hand inventory ships within 24 hours. When out of stock Please expect a 1 to-2-week ETA from manufacturer. Please feel free to contact us for any questions.
Price: $1,050.00
Sale: $945.00
Save: 10%
Save: $105.00
Description:
Suter Racing Swingarm BMW S1000RR 2019 - 2020 041-62001
The Suter swingarm boosts performance, gives more edge grip, confidence, and feel. Your bike will be faster and safer. It makes yours like a Factory one. The swingarm comes with all you need: Axis, mud-guard,etc.
The Suter swingarm boosts performance, gives more edge grip, confidence, and feel. Your bike will be faster and safer. It makes yours like a Factory one. The swingarm comes with all you need: Axis, mud-guard,etc.
Due to the modified design, a larger tire radius/diameter can be installed, and yet there are more adjustment possibilities! Also, the changed stiffness ensures better rideability of the motorcycle and more mechanical grip, especially when exiting the corner.
Note:
- Rear shock has to be modified for the use with this swingarm (lower fixing and length).
- Routing of the exhaust system has to be adapted to the new swingarm design. The exhaust is available as an additional part.
- For mounting the Suter Swingarm, the assembly kit is needed.
More confidence, more feel, more fun, faster, and safer!
Item #: 041-62001
Condition:
New
Special Order Item Please expect a 1 to-2-week ETA from manufacturer. Please feel free to contact us for any questions.Special Order Item Please expect a 1 to-2-week ETA from manufacturer. Please feel free to contact us for any questions.
Price: $9,999.00
BMW S1000RR/R HP4 tank grips
Description:
Snake skin kit includes left and right tank grips and center tank protector.
Item #: 62-1000-SS
Condition:
New
Ships within 24-48 hours and ships directly from our supplier. Please note supply-chain related delays are possible.
Price: $69.95
BMW S1000RR/R HP4 tank grips
Description:
Snake skin kit includes left and right tank grips and center tank protector.
Item #: 62-1000-XL2
Condition:
New
Ships within 24-48 hours and ships directly from our supplier. Please note supply-chain related delays are possible.
Price: $56.95
Description:
Teknofibra Extra Light Thermal Reflective Belly Pan Kit 30"x12"' .8mm Thickness 0121710638
-Comes with installation kit with Catalog with Install instructions Aluminum tape and an application tool.
-30" x 12"'
-.8mm Thickness
-Non Toxic material that reflects heat, flame, and insulates from sound.
-Used for Insulating fairings on Motorcycles, Cars, Aircraft and many other applications.
-Comes with installation kit with Catalog with Install instructions Aluminum tape and an application tool.
-30" x 12"'
-.8mm Thickness
-Non Toxic material that reflects heat, flame, and insulates from sound.
-Used for Insulating fairings on Motorcycles, Cars, Aircraft and many other applications.
Item #: 0121710638
Condition:
New
On-hand inventory ships within 24 hours, When out of stock Please expect a 2-to-4-week ETA from manufacturer. Please feel free to contact us for any
questions.
Price: $79.38
Description:
Thermal Heat protection for fuel tank
Teknofibra Heat shield material is designed to keep any radiant temperature from the engine or exhaust from heating up the fuel in the tank.
Cooler fuel = better performance.
Heat is the enemy when it comes to robbing power.
Its not just only the water temperature that you need to keep cool for optimum performance, Keeping your fuel cool produces the best power and why spend that extra money on race fuel if it is not staying cool.
Ever wonder why teams keep their fuel in fridges or on ice? add it at the last minute? Not to mention when it heats up it expands and it could be the difference of fitting that last 1/8th of a gallon in to finish that race!
These kits come pre cut to fit your model motorcycle , all you need to do is remove any factory heat sheild material clean with a degreaser and install your Teknofibra material , It really is simple.
This material is thinner and lighter than the material that comes from the factory which is a mineral based fiber.
Teknofibra is unlike anything else and will not burn or catch fire, it is non toxic and has proven to keep fuel temps up to 48degrees F cooler than oem material
Technical partner of JIR, Teknofibra® has long been known in the industry and used by prestigious Moto2, World Superbike, CIV and many others teams, for the following applications:
Protection of fairing and belly positioned in close proximity of the exhaust pipes.
Interposed between air box and throttle body allows the aspiration of cold air.
Glued under the tank keeps the lower the fuel temperature.
It maintains a stable temperature of the gas /oil on the nitrogen tank bladder of the dampers installed near the exhaust pipes.
Protects the battery and wiring avoiding problems to the ECU.
Protection of electronic components in hot areas.
Under the saddle and the cowl cover It protects the rider from the heat transmitted from the engine and the exhaust system.
More generally, to solve any problem of heat.
Teknofibra Heat shield material is designed to keep any radiant temperature from the engine or exhaust from heating up the fuel in the tank.
Cooler fuel = better performance.
Heat is the enemy when it comes to robbing power.
Its not just only the water temperature that you need to keep cool for optimum performance, Keeping your fuel cool produces the best power and why spend that extra money on race fuel if it is not staying cool.
Ever wonder why teams keep their fuel in fridges or on ice? add it at the last minute? Not to mention when it heats up it expands and it could be the difference of fitting that last 1/8th of a gallon in to finish that race!
These kits come pre cut to fit your model motorcycle , all you need to do is remove any factory heat sheild material clean with a degreaser and install your Teknofibra material , It really is simple.
This material is thinner and lighter than the material that comes from the factory which is a mineral based fiber.
Teknofibra is unlike anything else and will not burn or catch fire, it is non toxic and has proven to keep fuel temps up to 48degrees F cooler than oem material
Technical partner of JIR, Teknofibra® has long been known in the industry and used by prestigious Moto2, World Superbike, CIV and many others teams, for the following applications:
Protection of fairing and belly positioned in close proximity of the exhaust pipes.
Interposed between air box and throttle body allows the aspiration of cold air.
Glued under the tank keeps the lower the fuel temperature.
It maintains a stable temperature of the gas /oil on the nitrogen tank bladder of the dampers installed near the exhaust pipes.
Protects the battery and wiring avoiding problems to the ECU.
Protection of electronic components in hot areas.
Under the saddle and the cowl cover It protects the rider from the heat transmitted from the engine and the exhaust system.
More generally, to solve any problem of heat.
Item #: 400101001
Condition:
New
Limited Supply: Only 6 Left!
On-hand inventory ships within 24 hours, When out of stock Please expect a 2-to-4-week ETA from manufacturer. Please feel free to contact us for any questions.
Price: $173.25
Description:
TIGHTAILS BMW S1000RR 09'+ REAR SUPPORT BRACKET BMW1000BRA
Tightails is made for racing only. They are not designed for use with Street/OEM Bodywork. Tightails is made for race bodywork which do not have headlights, tail lights, mirrors, etc.
Tightails is made for racing only. They are not designed for use with Street/OEM Bodywork. Tightails is made for race bodywork which do not have headlights, tail lights, mirrors, etc.
Item #: BMW1000BRA
Condition:
New
Ships within 24-48 hours and ships directly from our supplier. Please note supply-chain related delays are possible.
Price: $33.00
Description:
TIGHTAILS BMW S1000RR 09-18' EXHAUST HANGER BMW1000EXH
Tightails is made for racing only. They are not designed for use with Street/OEM Bodywork. Tightails is made for race bodywork which do not have headlights, tail lights, mirrors, etc.
Tightails is made for racing only. They are not designed for use with Street/OEM Bodywork. Tightails is made for race bodywork which do not have headlights, tail lights, mirrors, etc.
Item #: BMW1000EXH
Condition:
New
Ships within 24-48 hours and ships directly from our supplier. Please note supply-chain related delays are possible.
Price: $92.40
Description:
TIGHTAILS BMW S1000RR 09-18' SUBFRAME BMW1000SUB
Tightails is made for racing only. They are not designed for use with Street/OEM Bodywork. Tightails is made for race bodywork which do not have headlights, tail lights, mirrors, etc.
Tightails is made for racing only. They are not designed for use with Street/OEM Bodywork. Tightails is made for race bodywork which do not have headlights, tail lights, mirrors, etc.
Item #: BMW1000SUB
Condition:
New
Ships within 24-48 hours and ships directly from our supplier. Please note supply-chain related delays are possible.
Price: $473.00
Description:
TIGHTAILS BMW S1000RR 09-18' UPPER STAY BMW1000UPP
Tightails is made for racing only. They are not designed for use with Street/OEM Bodywork. Tightails is made for race bodywork which do not have headlights, tail lights, mirrors, etc.
Tightails is made for racing only. They are not designed for use with Street/OEM Bodywork. Tightails is made for race bodywork which do not have headlights, tail lights, mirrors, etc.
Item #: BMW1000UPP
Condition:
New
Ships within 24-48 hours and ships directly from our supplier. Please note supply-chain related delays are possible.
Price: $192.50
Titanium rotor bolts BMW S1000RR
Description:
Material: Titanium Grade 5
Brake rotor Bolts
Pack Quantity: 12
Head Style: Special - Allen Key
Thread Diameter: 8mm
Thread Pitch: 1.25mm
Thread Length: 23mm
Head Diameter: 16mm
Head Height: 2mm
Length: 26mm
Allen Key Size: 5mm
Brake rotor Bolts
Pack Quantity: 12
Head Style: Special - Allen Key
Thread Diameter: 8mm
Thread Pitch: 1.25mm
Thread Length: 23mm
Head Diameter: 16mm
Head Height: 2mm
Length: 26mm
Allen Key Size: 5mm
Item #: TI12DISCBMW001
Condition:
New
drop Ships within directly from our supplier. Typical time to process 24-48hrs not including weekends
Price: $119.99
S1000RR TK Brake Rotors
Description:
TK Dischi Evo Ventilated Floating Rotors for Competition use only to fit BMW S1000RR HP front wheel Fits HP wheel for 2014 HP4 2015-19 S1000rr K46 (Does not fit 2020+ S1000RR K67 Model)
-320mm x 5.75mm
-Bobbin-Less
-Exclusive Carrier Technology
-Sold as a set Left and Right
-Hand-crafted from Billet Metal
-Better Cooling
-Increased braking modulation
-Excellent pad cleaning
-Reduced residual torque
-Improved safety
-320mm x 5.75mm
-Bobbin-Less
-Exclusive Carrier Technology
-Sold as a set Left and Right
-Hand-crafted from Billet Metal
-Better Cooling
-Increased braking modulation
-Excellent pad cleaning
-Reduced residual torque
-Improved safety
Item #: B04E
Condition:
New
On-hand inventory ships within 24 hours. please expect a 4 week ETA from manufacturer when out of stock. All Custom color and narrow band options have a 4-6 week eta
Price: $1,025.00
Sale: $922.50
Save: 10%
Save: $102.50
Description:
Translogic QSXi Quickshifter for BMW S1000 2008+ TLS-QSXi-O-DCS-01
1dn 5up or 1up 5dn road or race pattern
BMW Quickshifter for S1000 models 2008 onwards with standard road shift or inverted race shift gear lever set-up. (not plug&play, comes with crimp tool and zero solder connectors) QSXi Intellishift Quickshifter. Unique and powerful! Featuring our very latest superior Intellishift protocol providing the very best quickshifting possible. These advanced Intellishift quickshifters are the smallest multi-channel systems available and unlike other single channel quickshifters our latest range of Intellishift systems provide the finest MotoGP seamless shift simulation. Now with even more adjustment possibilities for professional users and throttle blipper output, its a winner!.Item #: TLS-QSXi-O-DCS
Condition:
New
Translogic- On-hand inventory ships within 24 hours: We order Directly from Translogic once per month. When out of stock Please expect a 1 to-2-week ETA from manufacturer. Supply-chain related delays are possible.
Price: $439.00
Description:
Vesrah Brake Pads VD-9053XX
*Sold per caliper
Vesrah XX pads are the top of the line pad. MADE FOR RACING. They offer slightly less bite than the older RJL compound but greater braking power with a progressive feel. Small increases in lever force translate to exceptional increases in braking power. True one-finger braking with excellent feel and no fade. Your brakes will have the same feel and response from the first corner to the last.
*Sold per caliper
Vesrah XX pads are the top of the line pad. MADE FOR RACING. They offer slightly less bite than the older RJL compound but greater braking power with a progressive feel. Small increases in lever force translate to exceptional increases in braking power. True one-finger braking with excellent feel and no fade. Your brakes will have the same feel and response from the first corner to the last.
Item #: VD-9053XX
Condition:
New
On-hand inventory ships within 24 hours. When out of stock Please expect a 3 week ETA from manufacturer. Please note supply-chain related delays are possible.
Price: $155.40
Description:
S1000RR seat for Carbonin bodywork
Pictures are shown for reference only and may not accurately represent the exact model of your seat
Pictures are shown for reference only and may not accurately represent the exact model of your seat
Item #: FM210B
Condition:
New
In Stock inventory ships within 24 hours. Avio Fiber has a typical eta of 4-6 weeks, Carbon Fiber can take up to 8 weeks due to production times. Please note supply-chain related delays are possible.
Price: $118.22