- Home »
- Catalog
HHR Performance » 2010, Kawasaki, Ninja ZX-14R
Products for:
- Year: 2010
- Make: Kawasaki
- Model: Ninja ZX-14R
View Universal items for: 2010 Kawasaki Ninja ZX-14R
Browse Products
Items 1-17 of 17
Description:
Rotobox BOOST Front Wheel
The new and improved model BOOST carbon fiber wheel from Rotobox, decreasing the weight from the RBX2 with improved design and higher performance! Comes in gloss and matte finish, in both symmetric and convex designs.
Like the RBX2, the BOOST is produced using Rotobox's unique 3-component composite - combining carbon, epoxy and stainless steel. By integrating the stainless 2,5 mm steel wire in each side of the rim, we increase its impact resistance at the most critical outer part. JWL and DOT approved, having met JASO T203-85 safety standards.
Another hidden BOOST gem - the Structural Rib. Thanks to the High Pressure Core Technology the structural rib is placed in the inner side between the spokes, with its mission to support the stress hot spot of the wheel. As a result the BOOST elegant spoke design brings greater stiffness and although the spokes are thinner the BOOST is stronger than ever - with a permissible static load of 280 kg on the rear and 180kg on the front wheel.
ASSEMBLING COMPONENTS
Carbon fiber composite rim, a one-piece hollow carbon cast, reinforced with stainless steel wire and UV protected; 7075 T6 aluminum alloy hubs, spacers and sprocket carrier [only with rear symmetric wheel]. machined from solid and hard anodized; polyurethane cushion drive set; SKF bearings; aluminum valve stem.
PRODUCT QUALITY CONTROL
Your Rotobox wheel has its own Serial Number to track the production history. We confirm to have performed quality verification procedure of your Rotobox wheel.
SIZE
17" x 3.5"
WEIGHT
REAR WHEEL WEIGHT 2.58 kg / 5.68 LBS
MAX. STATIC LOAD
REAR 180 kg / 400 LBS
MAX. OPERATING TEMPERATURE
100 C / 212 F
MAX. PRESSURE
4 BAR / 58 PSI
The wheels conform to safety standard JASO T203-85 for JWL dotE Certification. Before riding on public streets, be sure to check your local regulations.
Rotobox Boost Wheel set Weight example:
Stock S1000RR 11.70kg (25.79 lbs)
Rotobox Boost 6.69kg (14.74 lbs)
Weight saving more than 5.00kg of rotating mass. Incredible!
The new and improved model BOOST carbon fiber wheel from Rotobox, decreasing the weight from the RBX2 with improved design and higher performance! Comes in gloss and matte finish, in both symmetric and convex designs.
Like the RBX2, the BOOST is produced using Rotobox's unique 3-component composite - combining carbon, epoxy and stainless steel. By integrating the stainless 2,5 mm steel wire in each side of the rim, we increase its impact resistance at the most critical outer part. JWL and DOT approved, having met JASO T203-85 safety standards.
Another hidden BOOST gem - the Structural Rib. Thanks to the High Pressure Core Technology the structural rib is placed in the inner side between the spokes, with its mission to support the stress hot spot of the wheel. As a result the BOOST elegant spoke design brings greater stiffness and although the spokes are thinner the BOOST is stronger than ever - with a permissible static load of 280 kg on the rear and 180kg on the front wheel.
ASSEMBLING COMPONENTS
Carbon fiber composite rim, a one-piece hollow carbon cast, reinforced with stainless steel wire and UV protected; 7075 T6 aluminum alloy hubs, spacers and sprocket carrier [only with rear symmetric wheel]. machined from solid and hard anodized; polyurethane cushion drive set; SKF bearings; aluminum valve stem.
PRODUCT QUALITY CONTROL
Your Rotobox wheel has its own Serial Number to track the production history. We confirm to have performed quality verification procedure of your Rotobox wheel.
SIZE
17" x 3.5"
WEIGHT
REAR WHEEL WEIGHT 2.58 kg / 5.68 LBS
MAX. STATIC LOAD
REAR 180 kg / 400 LBS
MAX. OPERATING TEMPERATURE
100 C / 212 F
MAX. PRESSURE
4 BAR / 58 PSI
The wheels conform to safety standard JASO T203-85 for JWL dotE Certification. Before riding on public streets, be sure to check your local regulations.
Rotobox Boost Wheel set Weight example:
Stock S1000RR 11.70kg (25.79 lbs)
Rotobox Boost 6.69kg (14.74 lbs)
Weight saving more than 5.00kg of rotating mass. Incredible!
Item #: FA70350305
Condition:
New
Custom Product: Rotobox Products are made to order with an estimated completion time of 10-12 weeks from order placed. Delivery time is longer since we
have entered into a new industrial partnership with MV Agusta motorcycle manufacturer for the supply of wheels for original equipment on the new MV Agusta
Brutale 1000RR Assen! Although we have expanded our production capacity, we are also forced to extending the delivery time for the new orders.
Please feel free to contact us for any questions.
Free Ground Shipping
Price: $1,812.00
Description:
Rotobox BOOST Symmetric Rear Wheel
The new and improved model BOOST carbon fiber wheel from Rotobox, decreasing the weight from the RBX2 with improved design and higher performance! Comes in gloss and matte finish, in both symmetric and convex designs.
Like the RBX2, the BOOST is produced using Rotobox's unique 3-component composite - combining carbon, epoxy and stainless steel. By integrating the stainless 2,5 mm steel wire in each side of the rim, we increase its impact resistance at the most critical outer part. JWL and DOT approved, having met JASO T203-85 safety standards.
Another hidden BOOST gem - the Structural Rib. Thanks to the High Pressure Core Technology the structural rib is placed in the inner side between the spokes, with its mission to support the stress hot spot of the wheel. As a result the BOOST elegant spoke design brings greater stiffness and although the spokes are thinner the BOOST is stronger than ever - with a permissible static load of 280 kg on the rear and 180kg on the front wheel.
ASSEMBLING COMPONENTS
Carbon fiber composite rim, a one-piece hollow carbon cast, reinforced with stainless steel wire and UV protected; 7075 T6 aluminum alloy hubs, spacers and sprocket carrier [only with rear symmetric wheel]. machined from solid and hard anodized; polyurethane cushion drive set; SKF bearings; aluminum valve stem.
PRODUCT QUALITY CONTROL
Your Rotobox wheel has its own Serial Number to track the production history. We confirm to have performed quality verification procedure of your Rotobox wheel.
SIZE
17" x 6.00"
WEIGHT
REAR WHEEL WEIGHT 4.11 kg / 9.06 LBS
MAX. STATIC LOAD
REAR 280 kg / 617 LBS
MAX. OPERATING TEMPERATURE
100 C / 212 F
MAX. PRESSURE
4 BAR / 58 PSI
The wheels conform to safety standard JASO T203-85 for JWL dotE Certification. Before riding on public streets, be sure to check your local regulations.
Rotobox Boost Wheel set Weight example:
Stock S1000RR 11.70kg (25.79 lbs)
Rotobox Boost 6.69kg (14.74 lbs)
Weight saving more than 5.00kg of rotating mass. Incredible!
The new and improved model BOOST carbon fiber wheel from Rotobox, decreasing the weight from the RBX2 with improved design and higher performance! Comes in gloss and matte finish, in both symmetric and convex designs.
Like the RBX2, the BOOST is produced using Rotobox's unique 3-component composite - combining carbon, epoxy and stainless steel. By integrating the stainless 2,5 mm steel wire in each side of the rim, we increase its impact resistance at the most critical outer part. JWL and DOT approved, having met JASO T203-85 safety standards.
Another hidden BOOST gem - the Structural Rib. Thanks to the High Pressure Core Technology the structural rib is placed in the inner side between the spokes, with its mission to support the stress hot spot of the wheel. As a result the BOOST elegant spoke design brings greater stiffness and although the spokes are thinner the BOOST is stronger than ever - with a permissible static load of 280 kg on the rear and 180kg on the front wheel.
ASSEMBLING COMPONENTS
Carbon fiber composite rim, a one-piece hollow carbon cast, reinforced with stainless steel wire and UV protected; 7075 T6 aluminum alloy hubs, spacers and sprocket carrier [only with rear symmetric wheel]. machined from solid and hard anodized; polyurethane cushion drive set; SKF bearings; aluminum valve stem.
PRODUCT QUALITY CONTROL
Your Rotobox wheel has its own Serial Number to track the production history. We confirm to have performed quality verification procedure of your Rotobox wheel.
SIZE
17" x 6.00"
WEIGHT
REAR WHEEL WEIGHT 4.11 kg / 9.06 LBS
MAX. STATIC LOAD
REAR 280 kg / 617 LBS
MAX. OPERATING TEMPERATURE
100 C / 212 F
MAX. PRESSURE
4 BAR / 58 PSI
The wheels conform to safety standard JASO T203-85 for JWL dotE Certification. Before riding on public streets, be sure to check your local regulations.
Rotobox Boost Wheel set Weight example:
Stock S1000RR 11.70kg (25.79 lbs)
Rotobox Boost 6.69kg (14.74 lbs)
Weight saving more than 5.00kg of rotating mass. Incredible!
Item #: RA70600740
Condition:
New
Custom Product: Rotobox Products are made to order with an estimated completion time of 10-12 weeks from order placed. Delivery time is longer since we
have entered into a new industrial partnership with MV Agusta motorcycle manufacturer for the supply of wheels for original equipment on the new MV Agusta
Brutale 1000RR Assen! Although we have expanded our production capacity, we are also forced to extending the delivery time for the new orders.
Please feel free to contact us for any questions.
Free Ground Shipping
Price: $2,410.00
Description:
FGRT Upside Down Front Fork Road & Track FGRT 207
It doesn’t matter if you are heading for a National Roadracing title or if you are taking your bike on a run on
your favourite road. The new Road & Track front fork will give you loads of performance, stable damping and fantastic comfort. The new Road & Track front fork features the Öhlins 30 mm Cartridge Kit inside, a winning kit in several national superbike championships.
Compression and rebound adjustments are easily done with compression adjustment in one leg and rebound
adjustment in the other leg. The new front fork gives a big improvement in tire feel, brake support and the general handling of the bike. The outer design has been redesigned to make this front fork even more attractive.
Part number
FGRT 207
Type Code
Front Fork R&T
Technical data
| Length: | 755 mm |
|---|---|
| Stroke: | 120 mm |
| Rate N/mm: | 9,5 N/mm |
| Position: | front |
| Mounted spring: | 04744-95 |
| Spring series: | 04744-Serie |
Fits for vehicles
Kawasaki ZZ-R1400 (2006 – 2013)
- ABE (Germany)
Kawasaki ZZ-R1400 (2014 – 2020)
- "ABE" in preparation (Germany)
- Does not fit ZZR1400 Performance Sport version (Brembo calipers)!
Download
- Mounting Instruction FGRT 207 English (822,8 KB)
- Owner´s Manual Front Fork FGRT Series Road & Track English (1.895,5 KB)
- Mounting Instruction FGRT 207 German (1.280,1 KB)
- Owner´s Manual Front Fork FGRT Series Road & Track German (1.352,0 KB)
Item #: FGRT 207
Condition:
New
On-hand inventory ships within 24 hours. Please note supply-chain related delays are possible. Please contact us for ETA
Price: $2,699.00
Description:
Rotobox RBX2 Front Wheel
ASSEMBLING COMPONENTS
Carbon fiber composite rim, a one-piece hollow carbon cast, reinforced with stainless steel wire and UV protected; 7075 T6 aluminium alloy hubs, spacers and sprocket carrier [only with rear symmetric wheel]. machined from solid and hard anodized; polyurethane cushion drive set; SKF bearings; aluminium valve stem.
PRODUCT QUALITY CONTROL
Your Rotobox wheel has its own Serial Number to track the production history. We confirm to have performed quality verification procedure of your Rotobox wheel.
SIZE
17" x 3.5"
WEIGHT
REAR WHEEL WEIGHT 2.58 kg / 5.68 LBS
MAX. STATIC LOAD
REAR 150 kg / 330 LBS
MAX. OPERATING TEMPERATURE
100 C / 212 F
MAX. PRESSURE
4 BAR / 58 PSI
The wheels conform to safety standard JASO T203-85 for JWL dotE Certification. Before riding on public streets, be sure to check your local regulations.
The complete set of RBX2 wheels, without brake rotors and sprocket, weighs:
6,65 kg (14.6 lbs) for Kawasaki ZX10R
6,61 kg (14.5 lbs) for Aprilia RSV4
6,90 kg (15.1 lbs) for BMW S1000RR
5,35 kg (11.6 lbs) for Ducati 1199 Panigale
ASSEMBLING COMPONENTS
Carbon fiber composite rim, a one-piece hollow carbon cast, reinforced with stainless steel wire and UV protected; 7075 T6 aluminium alloy hubs, spacers and sprocket carrier [only with rear symmetric wheel]. machined from solid and hard anodized; polyurethane cushion drive set; SKF bearings; aluminium valve stem.
PRODUCT QUALITY CONTROL
Your Rotobox wheel has its own Serial Number to track the production history. We confirm to have performed quality verification procedure of your Rotobox wheel.
SIZE
17" x 3.5"
WEIGHT
REAR WHEEL WEIGHT 2.58 kg / 5.68 LBS
MAX. STATIC LOAD
REAR 150 kg / 330 LBS
MAX. OPERATING TEMPERATURE
100 C / 212 F
MAX. PRESSURE
4 BAR / 58 PSI
The wheels conform to safety standard JASO T203-85 for JWL dotE Certification. Before riding on public streets, be sure to check your local regulations.
The complete set of RBX2 wheels, without brake rotors and sprocket, weighs:
6,65 kg (14.6 lbs) for Kawasaki ZX10R
6,61 kg (14.5 lbs) for Aprilia RSV4
6,90 kg (15.1 lbs) for BMW S1000RR
5,35 kg (11.6 lbs) for Ducati 1199 Panigale
Item #: FA70350105
Condition:
New
Custom Product: Rotobox Products are made to order with an estimated completion time of 10-12 weeks from order placed. Delivery time is longer since we
have entered into a new industrial partnership with MV Agusta motorcycle manufacturer for the supply of wheels for original equipment on the new MV Agusta
Brutale 1000RR Assen! Although we have expanded our production capacity, we are also forced to extending the delivery time for the new orders.
Please feel free to contact us for any questions.
Free Ground Shipping
Price: $2,922.00
Description:
Rotobox RBX2 Symmetric Rear Wheel
ASSEMBLING COMPONENTS
Carbon fiber composite rim, a one-piece hollow carbon cast, reinforced with stainless steel wire and UV protected; 7075 T6 aluminium alloy hubs, spacers and sprocket carrier [only with rear symmetric wheel]. machined from solid and hard anodized; polyurethane cushion drive set; SKF bearings; aluminium valve stem.
PRODUCT QUALITY CONTROL
Your Rotobox wheel has its own Serial Number to track the production history. We confirm to have performed quality verification procedure of your Rotobox wheel.
SIZE
17" x 6.0"
WEIGHT
REAR WHEEL WEIGHT 4.11 kg / 9.06 LBS
MAX. STATIC LOAD
REAR 250 kg / 550 LBS
MAX. OPERATING TEMPERATURE
100 C / 212 F
MAX. PRESSURE
4 BAR / 58 PSI
The wheels conform to safety standard JASO T203-85 for JWL dotE Certification. Before riding on public streets, be sure to check your local regulations.
The complete set of RBX2 wheels, without brake rotors and sprocket, weighs:
6,65 kg (14.6 lbs) for Kawasaki ZX10R
6,61 kg (14.5 lbs) for Aprilia RSV4
6,90 kg (15.1 lbs) for BMW S1000RR
5,35 kg (11.6 lbs) for Ducati 1199 Panigale
ASSEMBLING COMPONENTS
Carbon fiber composite rim, a one-piece hollow carbon cast, reinforced with stainless steel wire and UV protected; 7075 T6 aluminium alloy hubs, spacers and sprocket carrier [only with rear symmetric wheel]. machined from solid and hard anodized; polyurethane cushion drive set; SKF bearings; aluminium valve stem.
PRODUCT QUALITY CONTROL
Your Rotobox wheel has its own Serial Number to track the production history. We confirm to have performed quality verification procedure of your Rotobox wheel.
SIZE
17" x 6.0"
WEIGHT
REAR WHEEL WEIGHT 4.11 kg / 9.06 LBS
MAX. STATIC LOAD
REAR 250 kg / 550 LBS
MAX. OPERATING TEMPERATURE
100 C / 212 F
MAX. PRESSURE
4 BAR / 58 PSI
The wheels conform to safety standard JASO T203-85 for JWL dotE Certification. Before riding on public streets, be sure to check your local regulations.
The complete set of RBX2 wheels, without brake rotors and sprocket, weighs:
6,65 kg (14.6 lbs) for Kawasaki ZX10R
6,61 kg (14.5 lbs) for Aprilia RSV4
6,90 kg (15.1 lbs) for BMW S1000RR
5,35 kg (11.6 lbs) for Ducati 1199 Panigale
Item #: RA70600540
Condition:
New
Custom Product: Rotobox Products are made to order with an estimated completion time of 10-12 weeks from order placed. Delivery time is longer since we
have entered into a new industrial partnership with MV Agusta motorcycle manufacturer for the supply of wheels for original equipment on the new MV Agusta
Brutale 1000RR Assen! Although we have expanded our production capacity, we are also forced to extending the delivery time for the new orders.
Please feel free to contact us for any questions.
Free Ground Shipping
Price: $3,410.00
Description:
Vesrah Brake Pads VD-444XX
*Sold per caliper
Vesrah XX pads are the top of the line pad. MADE FOR RACING. They offer slightly less bite than the older RJL compound but greater braking power with a progressive feel. Small increases in lever force translate to exceptional increases in braking power. True one-finger braking with excellent feel and no fade. Your brakes will have the same feel and response from the first corner to the last.
*Sold per caliper
Vesrah XX pads are the top of the line pad. MADE FOR RACING. They offer slightly less bite than the older RJL compound but greater braking power with a progressive feel. Small increases in lever force translate to exceptional increases in braking power. True one-finger braking with excellent feel and no fade. Your brakes will have the same feel and response from the first corner to the last.
Item #: VD-444XX
Condition:
New
On-hand inventory ships within 24 hours. When out of stock Please expect a 3 week ETA from manufacturer. Please note supply-chain related delays are possible.
Price: $155.40
4sr diablo AR
Description:
"WE MAKE OUR PRODUCTION SUITS IN THE SAME WAY WE PREPARE OUR FACTORY RACERS SUITS"
Are you looking for a top-class racing suit to accommodate your standalone airbag vest? Then you’ve just found the best Airbag Ready® leathers on the market. Our latest specification Monster Green AR 1PC race suit comes with all the unique safety points you would expect from 4SR, but with our increased area of accordion stretch panel, this suit can now work safely in conjunction with any standalone airbag vest for racing.
Over the years we have been working with professional racers to develop the safest suits possible, this is our safest and most comfortable yet. Racing Diablo AR suit already comes with 18 ergonomically placed protectors and if you remove the 4SR Level 2 back and chest protectors, you can then wear your chosen airbag vest underneath. Easy and fast, you're now Airbag Ready!
Thanks to the unique cut and placement of accordion stretch panels, you can use several variants of standalone airbags available on the market. Our stitching and materials remain and will always remain 100% the same as our factory racers suits.
If you want to improve your motorcycle suit, leather jacket or trousers with leather logos, 4SR badging service is here for you!
The price includes knee and elbow sliders, internal protectors, removable chest and back protectors, double hip and coccyx protection and all from reputable brands. We have 18 ergonomically placed protectors, the most used in any mass-produced 1pc leather suit.
"WE MAKE OUR PRODUCTION SUITS IN THE SAME WAY WE PREPARE OUR FACTORY RACERS SUITS"
We have also developed a simple and effective solution for holding up your leathers between track sessions, 4SR's Zipper Lock system will effectively hold the upper half of your suit out of the way.
The one-piece Racing Diablo AR Airbag Ready is also equipped with:
- Hollow hump to fit your Hydroback
- Seamless stretch in the crotch and armpit area for increased movement
- Flexible, comfortable material used on the sleeve cuffs
- Zipper lock to hold your leathers in between track sessions
- Elbow down TECH elbow sliders. Available in several colours - White, Black, Red, Fluorescent Red, Fluorescent Yellow and Green.
Standard equipment of the Racing Diablo AR Airbag Ready® includes:
- 1,2 mm thick cowhide / black, red, anthracite grey /
- 4SR Elbow down TECH - replaceable elbow sliders
- offset shoulders and pre-curved sleeves for the perfect riding position
- high specification Betac shoulder, elbows and knees, certificated in accordance with EN
- YKK & OPTI Zippers
- maximum perforation on chest area, local perforation on arms, hips and thighs
- 3D mesh lining
- Aramid stretch panels for maximum mobility
- flexible leather panels
- hollow aerodynamic hump to fit 4SR Hydrobag
- use of tripple seams & patented, double 4SR seam at more stressed points
- soft strech sleeve cuffs
- comfortable collar
- reflective logo on collar
- includes chest and back protectors (Both must be removed if using an Airbag system)
- includes knee sliders
- excludes Airbag system
- AR suit is compatible with In&motion airbag systems, Alpinestars Tech-Air®
- AR Airbag Ready® is a trademark registered in the Industrial Property Office of the Czech Republic
What does 4SR have and others don't?:
- The suit is fully equipped with racing protectors, including chest and back protectors
- Aramid stretch panel under the armpits and crotch is seamless
- Inside the suit you will find a hidden pocket for a LapTimer
- After closing the patent on the slider of the main zipper, the unzipped suit will not fall passed the butt
- Areas prone to abrasion are connected by a patented, double 4SR seam, which is sewn 4x!
- 4SR suits have two layers of leather on the elbows, shoulders, hips and seating area
- 4SR leather was tested by the TÜV Rheinland® certification center according to the EN 13595-2: 2002 standard, where it withstood 11.2s in the abrasion resistance test. We received the Level 2 safety label for our leather.
Item #: 110111248
Condition:
New
Limited Supply: Only 1 Left!
Please contact us for availability, We order from 4SR every 2-3 weeks so if this is not in stock we can get it on our next order
Price: $1,050.00
4SR Air Bag Ready Suit
Description:
Are you looking for a top-class racing suit to accommodate your standalone airbag vest? Then you’ve just found the best Airbag Ready® leathers on the market.
"WE MAKE OUR PRODUCTION SUITS IN THE SAME WAY WE PREPARE OUR FACTORY RACERS SUITS"
Our latest specification AR Monster Green 1PC race suit comes with all the unique safety points you would expect from 4SR, but with our increased area of accordion stretch panel, this suit can now work safely in conjunction with any standalone airbag vest for racing.
Over the years we have been working with professional racers to develop the safest suits possible, this is our safest and most comfortable yet. Racing Monster Green AR suit already comes with 18 ergonomically placed protectors and if you remove the 4SR Level 2 back and chest protectors, you can then wear your chosen airbag vest underneath. Easy and fast, you're now Airbag Ready!
Thanks to the unique cut and placement of accordion stretch panels, you can use several variants of standalone airbags available on the market. Our stitching and materials remain and will always remain 100% the same as our factory racers suits.
The price includes knee and elbow sliders, internal protectors, removable chest and back protectors, double hip and coccyx protection and all from reputable brands. We have 18 ergonomically placed protectors, the most used in any mass-produced 1pc leather suit.
"WE MAKE OUR PRODUCTION SUITS IN THE SAME WAY WE PREPARE OUR FACTORY RACERS SUITS"
We have also developed a simple and effective solution for holding up your leathers between track sessions, 4SR's Zipper Lock system will effectively hold the upper half of your suit out of the way.
The one-piece Racing AR Monster Green Airbag Ready is also equipped with:
- Hollow hump to fit your Camelbak rehydration pack
- Seamless stretch in the crotch and armpit area for increased movement
- Flexible, comfortable material used on the sleeve cuffs
- Zipper lock to hold your leathers in between track sessions
-
Elbow down TECH elbow sliders. Available in several colours - Black, Red, Fluorescent Red, Fluorescent Yellow and Green.
Standard equipment of the Racing Monster Green AR Airbag Ready® includes:
- 1,2 mm thick cowhide / black, Fluorescent Yellow, Fluorescent Red /
- 4SR Elbow down TECH - replaceable elbow sliders
- Offset Shoulders and Pre-Curved Sleeves for the Perfect Riding Position
- High Specification Betac Shoulder, Elbow and Knee Pads (Certified according to EN 1621-1: 2012)
- YKK & OPTI Zippers
- Maximum Perforation on chest area, local perforation on arms, hips and thighs
- complete front perforation & local perforations underarm
- 3D mesh lining
- Kevlar stretch panels for maximum mobility
- flexible leather panels
- hollow aerodynamic hump to fit camelbak
- use of double seams at more stressed points
- soft kevlar sleeve cuffs
- comfortable collar
- reflective logo on collar
- includes chest and spine protectors (Both must be removed if using an Airbag system)
- includes knee sliders
- excluding Airbag system
- AR suit is compatible with In & motion airbag system, Alpinestars Tech-Air®,
- AR Airbag Ready® is a trademark registered in the Industrial Property Office of the Czech Republic
Item #: 11011658
Condition:
New
Only size 48 52, 54, 56 In Stock at this price
Ships within 24-48 hours and ships directly from our supplier. We will contact you if there is any delay or availability issues.
Price: $1,050.00
ZX6R ZX10R ZX14RRear BST Rapid Tek Front Wheel
Description:
SIZE : 3.5" x 17"
WEIGHT : 6.15 lb. (2.79 kg)
Add .40 lb. (0.181 kg) with Worldwide Bearings ceramic bearings
Add .45 lb. (0.204 kg) with Worldwide Bearings steel bearings
STATIC LOAD RATING : 340 lb. (155 kg)
Click Here: Important Load Rating Safety Information
MATERIALS : Carbon fiber and aluminum
STYLE : Five slanted, split-spoke configuration
VALVE STEMS : BST Ultra-High-Speed (UHS) 90-degree, aluminum stems and caps
APPROVALS : DOT E and JWL for street and track use
FITMENT : Direct OEM replacement
WARRANTY : 2 Years
WEIGHT : 6.15 lb. (2.79 kg)
Add .40 lb. (0.181 kg) with Worldwide Bearings ceramic bearings
Add .45 lb. (0.204 kg) with Worldwide Bearings steel bearings
STATIC LOAD RATING : 340 lb. (155 kg)
Click Here: Important Load Rating Safety Information
MATERIALS : Carbon fiber and aluminum
STYLE : Five slanted, split-spoke configuration
VALVE STEMS : BST Ultra-High-Speed (UHS) 90-degree, aluminum stems and caps
APPROVALS : DOT E and JWL for street and track use
FITMENT : Direct OEM replacement
WARRANTY : 2 Years
Item #: 170326
Condition:
New
These Wheels ship from our US distributor and
can take up to 9-12 weeks for optional finishes.
Price: $1,795.00
Description:
DYMAG UP7X FORGED ALUMINUM FRONT KAWASAKI NINJA ZX-14R 06-14
Front Dymag Aluminum UP7X Front Wheel comes in one size
17 x 3.5"
-Made in UK
-Average of 30% wheel weight savings vs OEM. Seen up to 40% for some models!
-All Dymag wheels come fitted standard bearings ready to use. 90 deg valve included.
-Standard colours: Black Satin Matt ; Black Gloss ; Gunmetal Grey Gloss; White Gloss; Gold Gloss.
-Non standard colours available per special request, send us email after ordering confirming your RAL Color choice.
Front Dymag Aluminum UP7X Front Wheel comes in one size
17 x 3.5"
-Made in UK
-Average of 30% wheel weight savings vs OEM. Seen up to 40% for some models!
-All Dymag wheels come fitted standard bearings ready to use. 90 deg valve included.
-Standard colours: Black Satin Matt ; Black Gloss ; Gunmetal Grey Gloss; White Gloss; Gold Gloss.
-Non standard colours available per special request, send us email after ordering confirming your RAL Color choice.
Item #: UP7X-FRONT-KAWASAKI NINJA ZX-14R 06-14
Condition:
New
Dymag- Dymag Wheels are made to order, please account for 8-to-10-week ETA for production from manufacturer. During Busy times this can take longer. Please feel free to contact us for any questions.
Free Ground Shipping
Price: $1,333.46
Description:
DYMAG UP7X FORGED ALUMINUM REAR KAWASAKI NINJA ZX-14R 06-14
Front Dymag Aluminum UP7X Rear Wheel comes in TWO sizes
17 x 5.50"
17 x 6.00"
-Made in UK
-Average of 30% wheel weight savings vs OEM. Seen up to 40% for some models!
-Free Rear Aluminum Sprocket Included in 520, 525, 530 pitch
-Sample Total weight 12.3 lbs (ie. Dymag UP7X ZX10R Rear Wheel)
-All Dymag wheels come fitted with Black sprocket carrier, Talon gold or Black anodised sprocket and standard bearings ready to use. 90 deg valve included.
-Standard colours: Black Satin Matt ; Black Gloss ; Gunmetal Grey Gloss; White Gloss; Gold Gloss.
-Non standard colours available per special request, just send us an email!
Front Dymag Aluminum UP7X Rear Wheel comes in TWO sizes
17 x 5.50"
17 x 6.00"
-Made in UK
-Average of 30% wheel weight savings vs OEM. Seen up to 40% for some models!
-Free Rear Aluminum Sprocket Included in 520, 525, 530 pitch
-Sample Total weight 12.3 lbs (ie. Dymag UP7X ZX10R Rear Wheel)
-All Dymag wheels come fitted with Black sprocket carrier, Talon gold or Black anodised sprocket and standard bearings ready to use. 90 deg valve included.
-Standard colours: Black Satin Matt ; Black Gloss ; Gunmetal Grey Gloss; White Gloss; Gold Gloss.
-Non standard colours available per special request, just send us an email!
Item #: UP7X- KAWASAKI NINJA ZX-14R 06-14
Condition:
New
Dymag- Dymag Wheels are made to order, please account for 8-to-10-week ETA for production from manufacturer. During Busy times this can take longer. Please feel free to contact us for any questions.
Free Ground Shipping
Price: $1,629.79
Description:
MWR Performance & HE Filter For Kawasaki ZX14R (2006-11) ZZR1400 (2006-11) GTR1400 (2008-11) ZG1400 CONCOURS (2012-14) MC-041-06 MC-041-06-HE
Not a copy of the standard air filter, always searching for solutions, either it’s the performance , protection or fitment . Caution: clean and re-oil at least once a year with MWR air filter oil & cleaner . Remapping the ECU or the Fuel Control Module is recommended
Not a copy of the standard air filter, always searching for solutions, either it’s the performance , protection or fitment . Caution: clean and re-oil at least once a year with MWR air filter oil & cleaner . Remapping the ECU or the Fuel Control Module is recommended
Item #: MC-041-06
Condition:
New
Ships within 24-48 hours and ships directly from our supplier. Please note supply-chain related delays are possible.
Price: $109.95
Description:
*NEW Rotobox Bullet Forged Carbon Fiber Front Wheel Size 17"X 3.5"
Rotobox has extended its carbon motorcycle wheel product line by unveiling the Rotobox Bullet, the new thin spoke, ultra-light forged carbon wheel at EICMA. Rotobox is one of the leading companies in the development of lightweight high-performance carbon automotive wheels. It is also a company not satisfied with just keeping up with trends but setting them.
The wheels conform to safety standard JASO T203-85 for JWL dotE Certification. Before riding on public streets, be sure to check your local regulations.
Rotobox has extended its carbon motorcycle wheel product line by unveiling the Rotobox Bullet, the new thin spoke, ultra-light forged carbon wheel at EICMA. Rotobox is one of the leading companies in the development of lightweight high-performance carbon automotive wheels. It is also a company not satisfied with just keeping up with trends but setting them.
The wheels conform to safety standard JASO T203-85 for JWL dotE Certification. Before riding on public streets, be sure to check your local regulations.
Item #: F70350B305
Condition:
New
Custom Product: Rotobox Products are made to order with an estimated completion time of 10-12 weeks from order placed. Delivery time is longer since we
have entered into a new industrial partnership with MV Agusta motorcycle manufacturer for the supply of wheels for original equipment on the new MV Agusta
Brutale 1000RR Assen! Although we have expanded our production capacity, we are also forced to extending the delivery time for the new orders.
Please feel free to contact us for any questions.
Free Ground Shipping
Price: $1,934.00
Description:
*NEW Rotobox Bullet Forged Carbon Fiber Rear Wheel Size 17"X 6"
REAR WHEEL Weight
4.06 kg (8.95 lbs)
Includes Sprocket Carrier and Cush Drive Rubbers
Rotobox has extended its carbon motorcycle wheel product line by unveiling the Rotobox Bullet, the new thin spoke, ultra-light forged carbon wheel at EICMA. Rotobox is one of the leading companies in the development of lightweight high-performance carbon automotive wheels. It is also a company not satisfied with just keeping up with trends but setting them.
The wheels conform to safety standard JASO T203-85 for JWL dotE Certification. Before riding on public streets, be sure to check your local regulations.
UV PROTECTIVE COATING:
The carbon cast is protected from radiation with a very thin layer of special clear UV protective coating. Together with the clear and smooth rim surface it ensures the wheel a zero notch effect.
HIGH QUALITY CENTER PARTS:
For each motorcycle model the hubs are CNC machined from high quality 7075 T6 aluminum alloy used in the aviation industry, anodized into optional color and permanently assembled to the carbon rim.
SOLID THIN SPOKES:
To create solid thin spokes we use special carbon fiber yarn developed for military use.
THREE-COMPONENT-COMPOSITE:
Produced using Rotobox's unique 3 component composite - combining carbon, epoxy and stainless steel. The stainless 2,5 mm steel wire is integrated in each side of the rim increasing its impact resistance at the most critical outer part.
Titanium Hex Head Bolts M10x1.5x25mm:
Made from Aircraft Spec Grade 5 Titanium Alloy. Special high performance design by Rotobox. Precision machined with rolled threads and completely corrosion free. Excellent durability and minimum weight, 45% lighter than steel equivalents. Available optionally with the wheels.
CHOPPED CARBON FIBERS MEETS WOVEN FABRIC:
Rotobox's unique technology enables combining chopped carbon fibers with woven fabric seamlessly in one-piece monocoque.
PENTAGON SHAPED HUB:
The hub is locked into the carbon part with pentagon shape for ultimate transmission of torque.
REAR WHEEL Weight
4.06 kg (8.95 lbs)
Includes Sprocket Carrier and Cush Drive Rubbers
Rotobox has extended its carbon motorcycle wheel product line by unveiling the Rotobox Bullet, the new thin spoke, ultra-light forged carbon wheel at EICMA. Rotobox is one of the leading companies in the development of lightweight high-performance carbon automotive wheels. It is also a company not satisfied with just keeping up with trends but setting them.
The wheels conform to safety standard JASO T203-85 for JWL dotE Certification. Before riding on public streets, be sure to check your local regulations.
UV PROTECTIVE COATING:
The carbon cast is protected from radiation with a very thin layer of special clear UV protective coating. Together with the clear and smooth rim surface it ensures the wheel a zero notch effect.
HIGH QUALITY CENTER PARTS:
For each motorcycle model the hubs are CNC machined from high quality 7075 T6 aluminum alloy used in the aviation industry, anodized into optional color and permanently assembled to the carbon rim.
SOLID THIN SPOKES:
To create solid thin spokes we use special carbon fiber yarn developed for military use.
THREE-COMPONENT-COMPOSITE:
Produced using Rotobox's unique 3 component composite - combining carbon, epoxy and stainless steel. The stainless 2,5 mm steel wire is integrated in each side of the rim increasing its impact resistance at the most critical outer part.
Titanium Hex Head Bolts M10x1.5x25mm:
Made from Aircraft Spec Grade 5 Titanium Alloy. Special high performance design by Rotobox. Precision machined with rolled threads and completely corrosion free. Excellent durability and minimum weight, 45% lighter than steel equivalents. Available optionally with the wheels.
CHOPPED CARBON FIBERS MEETS WOVEN FABRIC:
Rotobox's unique technology enables combining chopped carbon fibers with woven fabric seamlessly in one-piece monocoque.
PENTAGON SHAPED HUB:
The hub is locked into the carbon part with pentagon shape for ultimate transmission of torque.
Item #: R70600B740
Condition:
New
Custom Product: Rotobox Products are made to order with an estimated completion time of 10-12 weeks from order placed. Delivery time is longer since we
have entered into a new industrial partnership with MV Agusta motorcycle manufacturer for the supply of wheels for original equipment on the new MV Agusta
Brutale 1000RR Assen! Although we have expanded our production capacity, we are also forced to extending the delivery time for the new orders.
Please feel free to contact us for any questions.
Free Ground Shipping
Price: $2,617.00
Description:
Samco Sport 5 Piece Silicone Radiator Coolant Hose Kit Kawasaki ZX 14 2006 - 2020 KAW-72
SamcoSport is the original performance silicone hose brand which replaces your OEM factory rubber radiator hoses to a high quality silicone hose kit.
Handmade in the UK and comes with a Lifetime Warranty ensuring you have the highest quality cooling products fitted to your motorcycle.
OEM and RACE kits available for some models.
This specific model of Hose kits are usually stocked in blue, black and green.
Important Installation Note: We highly recommend purchasing the matching Samco Sport Hose Clamp Kit for your bike! Samco Hose Kits require the use of hose clamps without open adjustment windows as they will damage the Samco Hoses and void warranty.
SamcoSport is the original performance silicone hose brand which replaces your OEM factory rubber radiator hoses to a high quality silicone hose kit.
Handmade in the UK and comes with a Lifetime Warranty ensuring you have the highest quality cooling products fitted to your motorcycle.
OEM and RACE kits available for some models.
This specific model of Hose kits are usually stocked in blue, black and green.
Important Installation Note: We highly recommend purchasing the matching Samco Sport Hose Clamp Kit for your bike! Samco Hose Kits require the use of hose clamps without open adjustment windows as they will damage the Samco Hoses and void warranty.
Item #: KAW-72
Condition:
New
Samco Items Ship within 24-48hrs Special order colors are made to
order with an 6–8-week ETA
Price: $320.95
Description:
Sprint Filter P08 F1-85 Kawasaki ZX-14 (06-11), Concours (06-11), and ZZR1400 (06-11) 402740
Item #: 402740
Condition:
New
Ships within 24-48 hours and ships directly from our supplier. Please note supply-chain related delays are possible.
Price: $249.00
Description:
Sprint Filter P08 Kawasaki ZX-14 (06-11), Concours (06-11), and ZZR1400 (06-11) 402727
Item #: 402727
Condition:
New
Ships within 24-48 hours and ships directly from our supplier. Please note supply-chain related delays are possible.
Price: $103.97
Items 1-17 of 17