- Home »
- Catalog
HHR Performance » 2009, Yamaha, YZF-R6
Products for:
- Year: 2009
- Make: Yamaha
- Model: YZF-R6
View Universal items for: 2009 Yamaha YZF-R6
Browse Products
Description:
Replacement Superbike Tail unit
Item #: Y12300AF
Condition:
New
In Stock inventory ships within 24 hours. Avio Fiber has a typical eta of 4-6 weeks, Carbon Fiber can take up to 8 weeks due to production times. Please note supply-chain related delays are possible.
Price: $277.37
Description:
Replacement upper fairing with Dzus
Item #: Y12210AF
Condition:
New
In Stock inventory ships within 24 hours. Avio Fiber has a typical eta of 4-6 weeks, Carbon Fiber can take up to 8 weeks due to production times. Please note supply-chain related delays are possible.
Price: $370.71
Description:
This is a 1-piece airbox cover that has the side panels built in to Replace the oem Airbox Cover and side panels
It comes Ready to install on your Bike with Perfect Fitment
Made from 100% real Carbon fiber
Light Flexible & Durable
Most Commonly used for Race bikes as this removes the need to remove side panels to get to the fuel tank bolts saving valuable time when working on the bike
It comes Ready to install on your Bike with Perfect Fitment
Made from 100% real Carbon fiber
Light Flexible & Durable
Most Commonly used for Race bikes as this removes the need to remove side panels to get to the fuel tank bolts saving valuable time when working on the bike
Item #: CY12425
Condition:
New
In Stock inventory ships within 24 hours. Avio Fiber has a typical eta of 4-6 weeks, Carbon Fiber can take up to 8 weeks due to production times. Please note supply-chain related delays are possible.
Price: $366.71
Description:
Carbon fiber Alternator cover installed with Silicon
Item #: CY7030
Condition:
New
In Stock inventory ships within 24 hours. Avio Fiber has a typical eta of 4-6 weeks, Carbon Fiber can take up to 8 weeks due to production times. Please note supply-chain related delays are possible.
Price: $133.35
Description:
Carbon fiber clutch cover installed with Silicon (not Supplied)
Item #: CY7040
Condition:
New
In Stock inventory ships within 24 hours. Avio Fiber has a typical eta of 4-6 weeks, Carbon Fiber can take up to 8 weeks due to production times. Please note supply-chain related delays are possible.
Price: $146.69
Description:
Whether you're riding on the street or on the track it makes sense to protect your frame, swingarm and engine case covers from any possible damage:
Protects against damage
Gravel rash
Road rash
Wet Lay Carbon Fiber with Carbon Kevlar laid on the inside for added protection.
These are light-weight and do not interfere with any OEM bodywork.
These also look great and give your bike a great appearance
Protects against damage
Gravel rash
Road rash
Wet Lay Carbon Fiber with Carbon Kevlar laid on the inside for added protection.
These are light-weight and do not interfere with any OEM bodywork.
These also look great and give your bike a great appearance
Item #: CY12050
Condition:
New
In Stock inventory ships within 24 hours. Avio Fiber has a typical eta of 4-6 weeks, Carbon Fiber can take up to 8 weeks due to production times. Please note supply-chain related delays are possible.
Price: $233.36
Description:
Lightweight Carbon fender Oem Replacement
Item #: CY7010
Condition:
New
In Stock inventory ships within 24 hours. Avio Fiber has a typical eta of 4-6 weeks, Carbon Fiber can take up to 8 weeks due to production times. Please note supply-chain related delays are possible.
Price: $204.03
Description:
Fuel tank protectors attached with Silicon (not supplied)
Item #: CY12505
Condition:
New
In Stock inventory ships within 24 hours. Avio Fiber has a typical eta of 4-6 weeks, Carbon Fiber can take up to 8 weeks due to production times. Please note supply-chain related delays are possible.
Price: $180.02
No Image Available
Description:
Replacement left side Fairing For Carbonin complete fairing, will not fit with other brands
Item #: CY12231
Condition:
New
In Stock inventory ships within 24 hours. Avio Fiber has a typical eta of 4-6 weeks, Carbon Fiber can take up to 8 weeks due to production times. Please note supply-chain related delays are possible.
Price: $213.36
Description:
Replacement left side Fairing For Carbonin complete fairing, will not fit with other brands
Item #: CY12212
Condition:
New
In Stock inventory ships within 24 hours. Avio Fiber has a typical eta of 4-6 weeks, Carbon Fiber can take up to 8 weeks due to production times. Please note supply-chain related delays are possible.
Price: $213.36
Description:
Replacement lower race Fairing For Carbonin complete fairing, will not fit with other brands
Item #: CY12220
Condition:
New
In Stock inventory ships within 24 hours. Avio Fiber has a typical eta of 4-6 weeks, Carbon Fiber can take up to 8 weeks due to production times. Please note supply-chain related delays are possible.
Price: $466.73
Description:
Carbon fiber timing cover installed with Silicon (not supplied)
Item #: CY7045
Condition:
New
In Stock inventory ships within 24 hours. Avio Fiber has a typical eta of 4-6 weeks, Carbon Fiber can take up to 8 weeks due to production times. Please note supply-chain related delays are possible.
Price: $106.68
Description:
Parts Included In Complete Race Fairing:
• Upper Race Fairing (6 Dzus)
• Lower Fairing (5 Dzus)
• Left Side Panel
• Right Side Panel
• Single Race Seat (2 Pcs)
There are 3 options for seats (not included in kit)
Basic - This seat is a 15mm neoprene foam glued to a base that is molded from the seat pan of the tail section and then attaches to the seat pan with bolts. Please not that these seat's will only fit carbonin seat pans and seat units. It will not work on any other brand. This foam will wear out like any other foam pad.
Standard - This is an upgrade to the basic seat which is covered in a neoprene material that protects the basic foam and provides the rider a level of grip but without compromising the need to slide side to side. It looks much more professional and will protect the basic foam from any wear from patches on leather suits or abuse from side to side movements. we have seen these seats go on for 3 seasons or more!
Parts Included In Complete Race Fairing:
• Upper Race Fairing (6 Dzus)
• Lower Fairing (5 Dzus)
• Left Side Panel
• Right Side Panel
• SBK Single Race Tail (2 Pcs)
There are 3 options for seats (not included in kit)
Basic - This seat is a 15mm neoprene foam glued to a base that is molded from the seat pan of the tail section and then attaches to the seat pan with bolts. Please not that these seat's will only fit carbonin seat pans and seat units. It will not work on any other brand. This foam will wear out like any other foam pad.
Standard - This is an upgrade to the basic seat which is covered in a neoprene material that protects the basic foam and provides the rider a level of grip but without compromising the need to slide side to side. It looks much more professional and will protect the basic foam from any wear from patches on leather suits or abuse from side to side movements. we have seen these seats go on for 3 seasons or more!
Pro Seat - This seat is for riders or teams that require their seat to provide back support or a step seat to keep them in a position from sliding too far back in the seat under acceleration, this is often done with a raised section so they can still get back in the seat in the full tuck, they are just raised up more which helps keep the butt up and their head shoulders and chest lower in the tuck. It is the same material as the standard seat but can also be customized with team logo's or race number -If you purchase a pro seat we will contact you to design your seat. Please note pro seats are made custom to order
• Upper Race Fairing (6 Dzus)
• Lower Fairing (5 Dzus)
• Left Side Panel
• Right Side Panel
• Single Race Seat (2 Pcs)
There are 3 options for seats (not included in kit)
Basic - This seat is a 15mm neoprene foam glued to a base that is molded from the seat pan of the tail section and then attaches to the seat pan with bolts. Please not that these seat's will only fit carbonin seat pans and seat units. It will not work on any other brand. This foam will wear out like any other foam pad.
Standard - This is an upgrade to the basic seat which is covered in a neoprene material that protects the basic foam and provides the rider a level of grip but without compromising the need to slide side to side. It looks much more professional and will protect the basic foam from any wear from patches on leather suits or abuse from side to side movements. we have seen these seats go on for 3 seasons or more!
Parts Included In Complete Race Fairing:
• Upper Race Fairing (6 Dzus)
• Lower Fairing (5 Dzus)
• Left Side Panel
• Right Side Panel
• SBK Single Race Tail (2 Pcs)
There are 3 options for seats (not included in kit)
Basic - This seat is a 15mm neoprene foam glued to a base that is molded from the seat pan of the tail section and then attaches to the seat pan with bolts. Please not that these seat's will only fit carbonin seat pans and seat units. It will not work on any other brand. This foam will wear out like any other foam pad.
Standard - This is an upgrade to the basic seat which is covered in a neoprene material that protects the basic foam and provides the rider a level of grip but without compromising the need to slide side to side. It looks much more professional and will protect the basic foam from any wear from patches on leather suits or abuse from side to side movements. we have seen these seats go on for 3 seasons or more!
Pro Seat - This seat is for riders or teams that require their seat to provide back support or a step seat to keep them in a position from sliding too far back in the seat under acceleration, this is often done with a raised section so they can still get back in the seat in the full tuck, they are just raised up more which helps keep the butt up and their head shoulders and chest lower in the tuck. It is the same material as the standard seat but can also be customized with team logo's or race number -If you purchase a pro seat we will contact you to design your seat. Please note pro seats are made custom to order
Item #: CY12100
Condition:
New
In Stock inventory ships within 24 hours. Avio Fiber has a typical eta of 4-6 weeks, Carbon Fiber can take up to 8 weeks due to production times. Please note supply-chain related delays are possible.
Price: $2,020.25
R6,carbon fiber,fairing,bodywork
Description:
Parts Included In Complete Race Fairing:
• Upper Race Fairing (6 Dzus)
• Lower Fairing (5 Dzus)
• Left Side Panel
• Right Side Panel
• Supersport Race Tail (4 Pcs)
• Upper Race Fairing (6 Dzus)
• Lower Fairing (5 Dzus)
• Left Side Panel
• Right Side Panel
• Supersport Race Tail (4 Pcs)
Item #: CY12101
Condition:
New
In Stock inventory ships within 24 hours. Avio Fiber has a typical eta of 4-6 weeks, Carbon Fiber can take up to 8 weeks due to production times. Please note supply-chain related delays are possible.
Price: $2,044.26
Description:
Carbonin Carbon Fiber Rear Fender 2006-2020 Yamaha YZF-R6
OEM replacement
OEM replacement
Item #: CY7020
Condition:
New
In Stock inventory ships within 24 hours. Avio Fiber has a typical eta of 4-6 weeks, Carbon Fiber can take up to 8 weeks due to production times. Please note supply-chain related delays are possible.
Price: $160.02
Description:
Replacement Right side Fairing For Carbonin complete fairing, will not fit with other brands
Item #: CY12232
Condition:
New
In Stock inventory ships within 24 hours. Avio Fiber has a typical eta of 4-6 weeks, Carbon Fiber can take up to 8 weeks due to production times. Please note supply-chain related delays are possible.
Price: $213.36
Description:
Replacement Supersport Tail unit 4 pcs
• Tail
• Draught shield
• Seat Support
• Seat Pan
Pictures are shown for reference only and may not accurately represent the exact model of your seat
• Tail
• Draught shield
• Seat Support
• Seat Pan
Pictures are shown for reference only and may not accurately represent the exact model of your seat
Item #: CY12301
Condition:
New
In Stock inventory ships within 24 hours. Avio Fiber has a typical eta of 4-6 weeks, Carbon Fiber can take up to 8 weeks due to production times. Please note supply-chain related delays are possible.
Price: $620.08
Description:
Whether you're riding on the street or on the track it makes sense to protect your frame, swingarm and engine case covers from any possible damage:
Protects against damage
Gravel rash
Road rash
Wet Lay Carbon Fiber with Carbon Kevlar laid on the inside for added protection.
These are light-weight and do not interfere with any OEM bodywork.
These also look great and give your bike a great appearance
Protects against damage
Gravel rash
Road rash
Wet Lay Carbon Fiber with Carbon Kevlar laid on the inside for added protection.
These are light-weight and do not interfere with any OEM bodywork.
These also look great and give your bike a great appearance
Item #: CY7055
Condition:
New
In Stock inventory ships within 24 hours. Avio Fiber has a typical eta of 4-6 weeks, Carbon Fiber can take up to 8 weeks due to production times. Please note supply-chain related delays are possible.
Price: $220.03
Description:
Replacement SBK Tail unit for carbonin bodywork
Pictures are shown for reference only and may not accurately represent the exact model of your seat
Pictures are shown for reference only and may not accurately represent the exact model of your seat
Item #: CY12300
Condition:
New
In Stock inventory ships within 24 hours. Avio Fiber has a typical eta of 4-6 weeks, Carbon Fiber can take up to 8 weeks due to production times. Please note supply-chain related delays are possible.
Price: $593.41
Description:
Replacement Upper Fairing For Carbonin complete fairing, will not fit with other brands
Item #: CY12210
Condition:
New
In Stock inventory ships within 24 hours. Avio Fiber has a typical eta of 4-6 weeks, Carbon Fiber can take up to 8 weeks due to production times. Please note supply-chain related delays are possible.
Price: $673.42
Description:
R6 seat for Carbonin bodywork
Pictures are shown for reference only and may not accurately represent the exact model of your seat
Pictures are shown for reference only and may not accurately represent the exact model of your seat
Item #: FM1261Y
Condition:
New
In Stock inventory ships within 24 hours. Avio Fiber has a typical eta of 4-6 weeks, Carbon Fiber can take up to 8 weeks due to production times. Please note supply-chain related delays are possible.
Price: $325.37
Description:
R6 seat for Carbonin bodywork
Pictures are shown for reference only and may not accurately represent the exact model of your seat
Pictures are shown for reference only and may not accurately represent the exact model of your seat
Item #: FM1260Y
Condition:
New
In Stock inventory ships within 24 hours. Avio Fiber has a typical eta of 4-6 weeks, Carbon Fiber can take up to 8 weeks due to production times. Please note supply-chain related delays are possible.
Price: $325.37
Description:
R6 seat for Carbonin bodywork
Pictures are shown for reference only and may not accurately represent the exact model of your seat
Pictures are shown for reference only and may not accurately represent the exact model of your seat
Item #: FM1251Y
Condition:
New
In Stock inventory ships within 24 hours. Avio Fiber has a typical eta of 4-6 weeks, Carbon Fiber can take up to 8 weeks due to production times. Please note supply-chain related delays are possible.
Price: $238.70
Description:
R6 seat for Carbonin bodywork
Pictures are shown for reference only and may not accurately represent the exact model of your seat
Pictures are shown for reference only and may not accurately represent the exact model of your seat
Item #: FM1250Y
Condition:
New
In Stock inventory ships within 24 hours. Avio Fiber has a typical eta of 4-6 weeks, Carbon Fiber can take up to 8 weeks due to production times. Please note supply-chain related delays are possible.
Price: $238.70
520 DID chain
Description:
D.I.D ER Series Exclusive 520 ERV7 Racing Chain 120 Link
520ERV7120ZB
-Premium Road Racing Chain
-Features gold color plates
-Tensile strength: 8,800 lbs.
520ERV7120ZB
-Premium Road Racing Chain
-Features gold color plates
-Tensile strength: 8,800 lbs.
Item #: 520ERV7120ZB
Condition:
New
Limited Supply: Only 3 Left!
If no inventory is listed above, please feel free to contact us for ETA from manufacturer.
Price: $253.99
520VR46SG120
Description:
In collaboration with D.I.D's official ambassador, Valentino Rossi, the VR46 chain allows you to run "The Doctor's" chain of choice, even with a little Rossi flare!
This series boasts D.I.D’s patented X-Ring seals, designed from our long-standing experience and success with Rossi in MotoGP to give you the best balance of performance and chain life.
Please note Chain be need to be shortened to fit.
This series boasts D.I.D’s patented X-Ring seals, designed from our long-standing experience and success with Rossi in MotoGP to give you the best balance of performance and chain life.
Please note Chain be need to be shortened to fit.
Item #: 7970487
Condition:
New
Limited Supply: Only 1 Left!
On-hand inventory ships within 24 hours. When out of stock Please expect a 2-to-4-week ETA from manufacturer. Please note supply-chain related delays
are possible.
Price: $146.50
Description:
Domino XM2 Throttle Cables 2008-2020 Yamaha R6
Item #: 5427.96.04-00
Condition:
New
Ships within 24-48 hours and ships directly from our supplier. Please note supply-chain related delays are possible.
Price: $76.95
Description:
DYMAG UP7X FORGED ALUMINUM FRONT YAMAHA YZF-R6
Front Dymag Aluminum UP7X Front Wheel comes in one size
17 x 3.5"
-Made in UK
-Average of 30% wheel weight savings vs OEM. Seen up to 40% for some models!
-All Dymag wheels come fitted standard bearings ready to use. 90 deg valve included.
-Standard colours: Black Satin Matt ; Black Gloss ; Gunmetal Grey Gloss; White Gloss; Gold Gloss.
-Non standard colours available per special request, send us email after ordering confirming your RAL Color choice.
Front Dymag Aluminum UP7X Front Wheel comes in one size
17 x 3.5"
-Made in UK
-Average of 30% wheel weight savings vs OEM. Seen up to 40% for some models!
-All Dymag wheels come fitted standard bearings ready to use. 90 deg valve included.
-Standard colours: Black Satin Matt ; Black Gloss ; Gunmetal Grey Gloss; White Gloss; Gold Gloss.
-Non standard colours available per special request, send us email after ordering confirming your RAL Color choice.
Item #: UP7X- YAMAHA YZF-R6
Condition:
New
Dymag- Dymag Wheels are made to order, please account for 8-to-10-week ETA for production from manufacturer. During Busy times this can take longer.
Please feel free to contact us for any questions.
Free Ground Shipping
Price: $1,333.46
Description:
DYMAG UP7X FORGED ALUMINUM REAR WHEEL YAMAHA YZF-R6
Front Dymag Aluminum UP7X Rear Wheel comes in three sizes
17 x 5.50"
17 x 6.00"
-Made in UK
-Average of 30% wheel weight savings vs OEM. Seen up to 40% for some models!
-Free Rear Aluminum Sprocket Included in 520, 525, 530 pitch
-Sample Total weight 12.3 lbs (ie. Dymag UP7X ZX10R Rear Wheel)
-All Dymag wheels come fitted with Black sprocket carrier, Talon gold or Black anodised sprocket and standard bearings ready to use. 90 deg valve included.
-Standard colours: Black Satin Matt ; Black Gloss ; Gunmetal Grey Gloss; White Gloss; Gold Gloss.
-Non standard colours available per special request, just send us an email!
Front Dymag Aluminum UP7X Rear Wheel comes in three sizes
17 x 5.50"
17 x 6.00"
-Made in UK
-Average of 30% wheel weight savings vs OEM. Seen up to 40% for some models!
-Free Rear Aluminum Sprocket Included in 520, 525, 530 pitch
-Sample Total weight 12.3 lbs (ie. Dymag UP7X ZX10R Rear Wheel)
-All Dymag wheels come fitted with Black sprocket carrier, Talon gold or Black anodised sprocket and standard bearings ready to use. 90 deg valve included.
-Standard colours: Black Satin Matt ; Black Gloss ; Gunmetal Grey Gloss; White Gloss; Gold Gloss.
-Non standard colours available per special request, just send us an email!
Item #: UP7X- REAR-YAMAHA YZF-R6
Condition:
New
Dymag- Dymag Wheels are made to order, please account for 8-to-10-week ETA for production from manufacturer. During Busy times this can take longer.
Please feel free to contact us for any questions.
Free Ground Shipping
Price: $1,629.79
Description:
Extreme Components Brake calipers heatsink for Yamaha R6 (2006/2016) - BPR02G
-Made In Italy
-Research and development takes place exclusively through collaboration with the best race teams engaged for years in the most prestigious national and world competitions; And only after specific tests, does Extreme Components start the production.
-Made In Italy
-Research and development takes place exclusively through collaboration with the best race teams engaged for years in the most prestigious national and world competitions; And only after specific tests, does Extreme Components start the production.
Item #: BPR02G
Condition:
New
On-hand inventory ships within 24 hours: When out of stock delivery times can vary from 2 to 6 weeks Please note supply-chain related delays are possible.
Price: $193.75
Description:
Extreme Components Brake lever for Yamaha R6 (2006/2020) - PED-GP EVO LFR R6
-Made In Italy
-Research and development takes place exclusively through collaboration with the best race teams engaged for years in the most prestigious national and world competitions; And only after specific tests, does Extreme Components start the production.
-Made In Italy
-Research and development takes place exclusively through collaboration with the best race teams engaged for years in the most prestigious national and world competitions; And only after specific tests, does Extreme Components start the production.
Item #: PED-GP EVO LFR R6
Condition:
New
On-hand inventory ships within 24 hours: When out of stock delivery times can vary from 2 to 6 weeks Please note supply-chain related delays are
possible.
Price: $95.81
Description:
Extreme Components Brake side monolithic plate for Yamaha R6 (2006/2020) - PED-GP EVO MON DX R6
-Made In Italy
-Research and development takes place exclusively through collaboration with the best race teams engaged for years in the most prestigious national and world competitions; And only after specific tests, does Extreme Components start the production.
-Made In Italy
-Research and development takes place exclusively through collaboration with the best race teams engaged for years in the most prestigious national and world competitions; And only after specific tests, does Extreme Components start the production.
Item #: PED-GP EVO MON DX R6
Condition:
New
On-hand inventory ships within 24 hours: When out of stock delivery times can vary from 2 to 6 weeks Please note supply-chain related delays are
possible.
Price: $157.50
Description:
Extreme Components Frame protection for Yamaha YZF R6 (2008/2020) - CY12050
-Made In Italy
-Research and development takes place exclusively through collaboration with the best race teams engaged for years in the most prestigious national and world competitions; And only after specific tests, does Extreme Components start the production.
-Made In Italy
-Research and development takes place exclusively through collaboration with the best race teams engaged for years in the most prestigious national and world competitions; And only after specific tests, does Extreme Components start the production.
Item #: EXT-CY12050
Condition:
New
On-hand inventory ships within 24 hours: When out of stock delivery times can vary from 2 to 6 weeks Please note supply-chain related delays are
possible.
Price: $324.88
Description:
Extreme Components Swingarm protection for Yamaha YZF R6 (2008/2020) - CY12055
-Made In Italy
-Research and development takes place exclusively through collaboration with the best race teams engaged for years in the most prestigious national and world competitions; And only after specific tests, does Extreme Components start the production.
-Made In Italy
-Research and development takes place exclusively through collaboration with the best race teams engaged for years in the most prestigious national and world competitions; And only after specific tests, does Extreme Components start the production.
Item #: CY12055
Condition:
New
On-hand inventory ships within 24 hours: When out of stock delivery times can vary from 2 to 6 weeks Please note supply-chain related delays are
possible.
Price: $282.50
Racing Clutch perch 29mm with bearings and Fold up lever. No clutch switch provisions
Description:
Extreme Components Clutch control racing with GP EVO lever offset 29 mm - CFC29N
This does not have a clutch switch so would need drilled and tapped if required for your model
-Made In Italy
-Research and development takes place exclusively through collaboration with the best race teams engaged for years in the most prestigious national and world competitions; And only after specific tests, does Extreme Components start the production.
-Made In Italy
-Research and development takes place exclusively through collaboration with the best race teams engaged for years in the most prestigious national and world competitions; And only after specific tests, does Extreme Components start the production.
Item #: CFC29N
Condition:
New
On-hand inventory ships within 24 hours: When out of stock delivery times can vary from 2 to 6 weeks Please note supply-chain related delays are possible.
Price: $305.55
Description:
Extreme Components Engine protector for Yamaha R6 (2007/2020) - clutch - CLUTCH R6
-Made In Italy
-Research and development takes place exclusively through collaboration with the best race teams engaged for years in the most prestigious national and world competitions; And only after specific tests, does Extreme Components start the production.
-Made In Italy
-Research and development takes place exclusively through collaboration with the best race teams engaged for years in the most prestigious national and world competitions; And only after specific tests, does Extreme Components start the production.
Item #: CLUTCH R6
Condition:
New
On-hand inventory ships within 24 hours: When out of stock delivery times can vary from 2 to 6 weeks Please note supply-chain related delays are
possible.
Price: $129.85
Description:
Extreme Components Engine protectors for Yamaha R6 (2007/2020) - pick up + alternator + clutch - PROT-ENG R6
-Made In Italy
-Research and development takes place exclusively through collaboration with the best race teams engaged for years in the most prestigious national and world competitions; And only after specific tests, does Extreme Components start the production.
-Made In Italy
-Research and development takes place exclusively through collaboration with the best race teams engaged for years in the most prestigious national and world competitions; And only after specific tests, does Extreme Components start the production.
Item #: PROT-ENG R6
Condition:
New
On-hand inventory ships within 24 hours: When out of stock delivery times can vary from 2 to 6 weeks Please note supply-chain related delays are
possible.
Price: $318.00
Description:
Extreme Components Engine protector for Yamaha R6 (2007/2020) - alternator - ALTER R6
-Made In Italy
-Research and development takes place exclusively through collaboration with the best race teams engaged for years in the most prestigious national and world competitions; And only after specific tests, does Extreme Components start the production.
-Made In Italy
-Research and development takes place exclusively through collaboration with the best race teams engaged for years in the most prestigious national and world competitions; And only after specific tests, does Extreme Components start the production.
Item #: ALTER R6
Condition:
New
On-hand inventory ships within 24 hours: When out of stock delivery times can vary from 2 to 6 weeks Please note supply-chain related delays are
possible.
Price: $129.85
Description:
Extreme Components Engine protector for Yamaha R6 (2007/2020) - pick up - PICK UP R6
-Made In Italy
-Research and development takes place exclusively through collaboration with the best race teams engaged for years in the most prestigious national and world competitions; And only after specific tests, does Extreme Components start the production.
-Made In Italy
-Research and development takes place exclusively through collaboration with the best race teams engaged for years in the most prestigious national and world competitions; And only after specific tests, does Extreme Components start the production.
Item #: PICK UP R6
Condition:
New
On-hand inventory ships within 24 hours: When out of stock delivery times can vary from 2 to 6 weeks Please note supply-chain related delays are
possible.
Price: $87.45
Description:
Extreme Components Exhaust support plate for Yamaha R6 (2006/2020) - SUPSC R6
-Made In Italy
-Research and development takes place exclusively through collaboration with the best race teams engaged for years in the most prestigious national and world competitions; And only after specific tests, does Extreme Components start the production.
-Made In Italy
-Research and development takes place exclusively through collaboration with the best race teams engaged for years in the most prestigious national and world competitions; And only after specific tests, does Extreme Components start the production.
Item #: SUPSC R6
Condition:
New
Limited Supply: Only 1 Left!
On-hand inventory ships within 24 hours: When out of stock delivery times can vary from 2 to 6 weeks Please note supply-chain related delays are
possible.
Price: $49.88
Description:
Extreme Components Gear Shift lever for Yamaha R6 (2006/2020) - PED-GP EVO LCA R6
-Made In Italy
-Research and development takes place exclusively through collaboration with the best race teams engaged for years in the most prestigious national and world competitions; And only after specific tests, does Extreme Components start the production.
-Made In Italy
-Research and development takes place exclusively through collaboration with the best race teams engaged for years in the most prestigious national and world competitions; And only after specific tests, does Extreme Components start the production.
Item #: PED-GP EVO LCA R6
Condition:
New
On-hand inventory ships within 24 hours: When out of stock delivery times can vary from 2 to 6 weeks Please note supply-chain related delays are
possible.
Price: $95.81
Description:
Extreme Components Gear side monolithic plate for Yamaha R6 (2006/2020) - PED-GP EVO MON SX R6
-Made In Italy
-Research and development takes place exclusively through collaboration with the best race teams engaged for years in the most prestigious national and world competitions; And only after specific tests, does Extreme Components start the production.
-Made In Italy
-Research and development takes place exclusively through collaboration with the best race teams engaged for years in the most prestigious national and world competitions; And only after specific tests, does Extreme Components start the production.
Item #: PED-GP EVO MON SX R6
Condition:
New
On-hand inventory ships within 24 hours: When out of stock delivery times can vary from 2 to 6 weeks Please note supply-chain related delays are
possible.
Price: $157.50
Brake Lever Guard Universal
Description:
Extreme Components GP EVO Carbon Fiber Brake Lever Guard CPLEVO
-Made In Italy
-Research and development takes place exclusively through collaboration with the best race teams engaged for years in the most prestigious national and world competitions; And only after specific tests, does Extreme Components start the production. -Developed with Wind Tunnel Technology to guarantee best aerodynamics
Only racing use this does not bolt up to the oem handlebar as it uses an expanding adaptor that goes into a hollow clipon tube
-Made In Italy
-Research and development takes place exclusively through collaboration with the best race teams engaged for years in the most prestigious national and world competitions; And only after specific tests, does Extreme Components start the production. -Developed with Wind Tunnel Technology to guarantee best aerodynamics
Only racing use this does not bolt up to the oem handlebar as it uses an expanding adaptor that goes into a hollow clipon tube
Item #: CPLEVO
Condition:
New
On-hand inventory ships within 24 hours: When
out of stock delivery times can vary from 2 to
6 weeks Please note supply-chain related
delays are possible.
Price: $223.13
Description:
Extreme Components Racing Gear Shift lever support for Yamaha R6 (2006/2020) - PED-GP EVO SUPLC R6
-Made In Italy
-Research and development takes place exclusively through collaboration with the best race teams engaged for years in the most prestigious national and world competitions; And only after specific tests, does Extreme Components start the production.
-Made In Italy
-Research and development takes place exclusively through collaboration with the best race teams engaged for years in the most prestigious national and world competitions; And only after specific tests, does Extreme Components start the production.
Item #: PED-GP EVO SUPLC R6
Condition:
New
On-hand inventory ships within 24 hours: When out of stock delivery times can vary from 2 to 6 weeks Please note supply-chain related delays are
possible.
Price: $82.69
Description:
Extreme Components GP EVO rear sets kit for Yamaha R6 (2006/2020) (standard and reverse shifting) with aluminium heel guard (black) - PED-GP EVO R6
-Made In Italy
-Research and development takes place exclusively through collaboration with the best race teams engaged for years in the most prestigious national and world competitions; And only after specific tests, does Extreme Components start the production.
-Made In Italy
-Research and development takes place exclusively through collaboration with the best race teams engaged for years in the most prestigious national and world competitions; And only after specific tests, does Extreme Components start the production.
Item #: PED-GP EVO R6
Condition:
New
On-hand inventory ships within 24 hours: When out of stock delivery times can vary from 2 to 6 weeks Please note supply-chain related delays are
possible.
Price: $560.25
Description:
Extreme Components GP EVO rear sets kit for Yamaha R6 (2006/2020) (standard and reverse shifting) with carbon fiber heel guard (black) - PED-GP EVO R6C
-Made In Italy
-Research and development takes place exclusively through collaboration with the best race teams engaged for years in the most prestigious national and world competitions; And only after specific tests, does Extreme Components start the production.
-Made In Italy
-Research and development takes place exclusively through collaboration with the best race teams engaged for years in the most prestigious national and world competitions; And only after specific tests, does Extreme Components start the production.
Item #: PED-GP EVO R6C
Condition:
New
On-hand inventory ships within 24 hours: When out of stock delivery times can vary from 2 to 6 weeks Please note supply-chain related delays are
possible.
Price: $600.75
Description:
Extreme Components GP EVO rear sets kit for Yamaha R6 (2006/2020) (standard and reverse shifting) with carbon fiber heel guard (silver) - PED-GP EVO R6B
-Made In Italy
-Research and development takes place exclusively through collaboration with the best race teams engaged for years in the most prestigious national and world competitions; And only after specific tests, does Extreme Components start the production.
-Made In Italy
-Research and development takes place exclusively through collaboration with the best race teams engaged for years in the most prestigious national and world competitions; And only after specific tests, does Extreme Components start the production.
Item #: PED-GP EVO R6B
Condition:
New
On-hand inventory ships within 24 hours: When out of stock delivery times can vary from 2 to 6 weeks Please note supply-chain related delays are
possible.
Price: $600.75
Description:
Bench Tuning Kit : Flash Tune Data-Link ECU Flashing Kits : Your bike already has a standalone ECU and now you can get the tools to program it! There is no longer any need to send away your ECU! See bike fitments for the different types of setups below -Thank you. Scroll down for in-depth kit information.
Fitment:
- Yamaha R1 2007-2008 (BENCH KIT)
- Yamaha R6 2008-2016 (BENCH KIT)
- VMax 2009-2011 (BENCH KIT ONLY)
This Interface allows you to easily adjust the following!
- Remove ECU Restrictions
- Engine Braking adjustments
- High Load Fuel Maps (with PC3 and PC5 map importing)
- Low Load (cruising) Fuel Maps
- Fuel Injector Proportioning
- Ignition Timing
- Immobilizer Function
- Cooling Fan Temps
- Rev-Limiter Control
- Remove Top Speed Limiter
- ECU Based Quick-shifting
- Speedometer calibrations
- and new features are added regularly.
Bench ECU Flashing Kit Includes:
- FTdataLink ECU Interface USB Cable
- Bench Flashing Harness to flash your ECU outside of the bike
- Power Supply for Bench flashing
We believe everyone deserves the same tuning technology that until now was reserved for factory riders. With our software you can remove the restrictions that the factory must put in place to meet strict street vehicle guidelines. By flashing your ECU you are able to tune your bike without interfering with critical correction factors resulting in smoother power gains than ever before possible.This product is for RACE USE ONLY! The included software will automatically update as new features are added!
Item #: FT-BNKT1
Condition:
New
Ships within 24-48 hours and ships directly from our supplier. Please note supply-chain related delays are possible.
Price: $450.00
Description:
Flash Tune Data-Link ECU Flashing Kits : Your bike already has a standalone ECU and now you can get the tools to program it! There is no longer any need to send away your ECU! Select your desired options from the pull down menu. See bike fitments for the different types of setups below. When ordering please include your bike's ECU # in the notes section at checkout to insure the proper setup is sent to you. Thank you. Scroll down for indepth kit information.
Fitment:
This Interface allows you to easily adjust the following!
Data-Link ECU Flashing Kit Includes:
We believe everyone deserves the same tuning technology that until now was reserved for factory riders. With our software you can remove the restrictions that the factory must put in place to meet strict street vehicle guidelines. By flashing your ECU you are able to tune your bike without interfering with critical correction factors resulting in smoother power gains than ever before possible.This product is for RACE USE ONLY! The included software will automatically update as new features are added!
Fitment:
- Yamaha R6 2008-2016 (BIKE SIDE HARNESS ONLY * see seperate listing for the bench kits for this bike)
This Interface allows you to easily adjust the following!
- Remove ECU Restrictions
- Engine Braking adjustments
- High Load Fuel Maps (with PC3 and PC5 map importing)
- Low Load (cruising) Fuel Maps
- Fuel Injector Proportioning
- Ignition Timing
- Immobilizer Function
- Cooling Fan Temps
- Rev-Limiter Control
- Remove Top Speed Limiter
- ECU Based Quick-shifting
- Speedometer calibrations
- and new features are added regularly.
Data-Link ECU Flashing Kit Includes:
- FTdataLink ECU Interface USB Cable
- Bike-side programming harness to permanently install on your bike
We believe everyone deserves the same tuning technology that until now was reserved for factory riders. With our software you can remove the restrictions that the factory must put in place to meet strict street vehicle guidelines. By flashing your ECU you are able to tune your bike without interfering with critical correction factors resulting in smoother power gains than ever before possible.This product is for RACE USE ONLY! The included software will automatically update as new features are added!
Item #: FT-FTDL3
Condition:
New
Ships within 24-48 hours and ships directly from our supplier. Please note supply-chain related delays are possible.
Price: $380.00
Limited Supply: Only 1 Left!
If no inventory is listed above, please feel free to contact us for ETA from manufacturer.
Price: $15.96
Yamaha: R1 04-08, R1 15-22, R6 06-2016, R6 17-22, R3 17-19, R6 Mectronik, R7 2022
Description:
The Chrome Pro 2 comes in a package containing:
Chrome Pro 2
Antenna with 90 degree SMA joint for TPMS receiver
GPS receiver
Main wiring
2 TPMS receivers with adapters (optionally for 8.5mm or 11.5mm valves)
Lambda sensor BOSH LSU 4.9
Cleaning cloth
To install it you only need to choose the plug & play adapter for your motorcycle.
The Chrome Pro 2 represents the maximum evolution of the Chrome system. Designed for those who want the most from their electronics, joins the features of the Chrome Plus with a new can bus system with acquisition of over 150 channels, integrated WiFi and Bluetooth connections, complete configurability and much more. Developed from the experience gained from the collaboration with Yamaha in the WSBK, it is now available for everyone.
Chrome Pro 2
Antenna with 90 degree SMA joint for TPMS receiver
GPS receiver
Main wiring
2 TPMS receivers with adapters (optionally for 8.5mm or 11.5mm valves)
Lambda sensor BOSH LSU 4.9
Cleaning cloth
To install it you only need to choose the plug & play adapter for your motorcycle.
The Chrome Pro 2 represents the maximum evolution of the Chrome system. Designed for those who want the most from their electronics, joins the features of the Chrome Plus with a new can bus system with acquisition of over 150 channels, integrated WiFi and Bluetooth connections, complete configurability and much more. Developed from the experience gained from the collaboration with Yamaha in the WSBK, it is now available for everyone.
Item #: CROR211
Condition:
New
On-hand inventory ships within 24 hours. We place weekly orders with Alpha, If we are out of stock on an item we can have it within 2 to 3 weeks
Order now to insure you are allocated from the next shipment. Please note supply-chain related delays are possible.
Price: $2,820.00
JP KS 003, R6 Kill switch, R1 Kill Switch
Item #: JP KS 003
Condition:
New
Price: $120.00
R6 Upper triple clamp GP
Description:
Upper triple clamp without ignition Barrell For Racing Version
Item #: PSYA206P1S
Condition:
New
Limited Supply: Only 2 Left!
We try to keep a small stock of this product however resupply can take between 2-3 weeks
Price: $279.00
R6 Upper triple clamp
Description:
Upper triple clamp for OEM ignition
Item #: PSYA206S1S
Condition:
New
We try to keep a small stock of this product however resupply can take between 2-3 weeks
Price: $279.00
steering stops for Yamaha R6 2017+
Description:
Turning stops used for track bikes
Item #: LSYA2152
Condition:
New
Limited Supply: Only 1 Left!
We try to keep a small stock of this product however resupply can take between 2-3 weeks
Price: $80.00
Description:
MIVV Slip-on Double Gun Titanium Exhaust For YAMAHA YZF 600 R6 2006 - 2016 Y.021.LDG
Item #: Y.021.LDG
Condition:
New
Order Processed within 24-48 hours and ships directly from our supplier. Please do not choose express shipping as an option because it will not be shipped Express. All exhausts ship Ground
Price: $397.10
Description:
MIVV Slip-on MK3 Black Stainless Steel Exhaust For YAMAHA YZF 600 R6 2006 - 2016 Y.021.LM3B
Item #: Y.021.LM3B
Condition:
New
Order Processed within 24-48 hours and ships directly from our supplier. Please do not choose express shipping as an option because it will not be shipped Express. All exhausts ship Ground
Price: $325.60
Description:
HHR Favorite
High precision, accurate to +/- 0.6 psi
Precise digital readout to 0.1 psi
Continuous pressure reading, no need to reset when activating bleed valve
Four selectable scales (PSI, BAR, KG-CM2, kPa)
Large easy to read display with back light for low light applications
Billet aluminum trapezoid body
Billet aluminum air chuck provides tight, leak free seal to tire valve and is specially designed for reading air pressure
High flow push button bleeder valve for precise pressure adjustment
15 inch long high pressure hose with dual swivels and Motion Pro design air chuck
Heavy duty anti-shock protective rubber boot on gauge
Battery powered (1000 tests) with battery strength indicator
Auto off to extend the battery life
Batteries included (Qty. 2 AAA size)
Two year limited warranty
High precision, accurate to +/- 0.6 psi
Precise digital readout to 0.1 psi
Continuous pressure reading, no need to reset when activating bleed valve
Four selectable scales (PSI, BAR, KG-CM2, kPa)
Large easy to read display with back light for low light applications
Billet aluminum trapezoid body
Billet aluminum air chuck provides tight, leak free seal to tire valve and is specially designed for reading air pressure
High flow push button bleeder valve for precise pressure adjustment
15 inch long high pressure hose with dual swivels and Motion Pro design air chuck
Heavy duty anti-shock protective rubber boot on gauge
Battery powered (1000 tests) with battery strength indicator
Auto off to extend the battery life
Batteries included (Qty. 2 AAA size)
Two year limited warranty
Item #: 08-0684
Condition:
New
If no inventory is listed above, please feel free to contact us for ETA from manufacturer.
Price: $109.99
Description:
MWR Racing WSBK Air Filter For Yamaha YZF R6 (2008+) MC-090-08/WSBK
Not a copy of the standard air filter, always searching for solutions, either it’s the performance , protection or fitment . Caution: clean and re-oil at least once a year with MWR air filter oil & cleaner . Remapping the ECU or the Fuel Control Module is recommended
Not a copy of the standard air filter, always searching for solutions, either it’s the performance , protection or fitment . Caution: clean and re-oil at least once a year with MWR air filter oil & cleaner . Remapping the ECU or the Fuel Control Module is recommended
Item #: MC-090-08/WSBK
Condition:
New
Ships within 24-48 hours and ships directly from our supplier. Please note supply-chain related delays are possible.
Price: $224.95
Description:
MWR Velocity Stacks for the Yamaha YZF R6 2008-2021 MWR-VS-900
Item #: MWR-VS-900
Condition:
New
Ships within 24-48 hours and ships directly from our supplier. Please note supply-chain related delays are possible.
Price: $950.00