- Home »
- Catalog
HHR Performance » 2009, Aprilia
Products for:
- Year: 2009
- Make: Aprilia
View Universal items for: 2009 Aprilia
Browse Products
Items 1-60 of 72
- Page 1 of 2
- Next
Description:
AiM SOLO 2 DL Aprilia RSV4 / Tuono V4 ECU interface harness Aprilia RS 660
For these Aprilia models:
RSV4 RR/RF from 2017
RSV4 1100 from 2019
Tuono V4 RR/Factory from 2017
For these Aprilia models:
RSV4 RR/RF from 2017
RSV4 1100 from 2019
Tuono V4 RR/Factory from 2017
Item #: V02589090
Condition:
New
Limited Supply: Only 1 Left!
Aim Supply has been severely affected due to material shortages and most products are currently on a 3 month delivery date. Please send us an email
request to find out ETAs.
Price: $115.00
Description:
AiM SOLO 2 DL Aprilia RSV4 / Tuono Bracket Mounting Kit X46KSARSV40
For these Aprilia models:
RSV4 RR/RF from 2017
RSV4 1100 from 2019
Tuono V4 RR/Factory from 2017
For these Aprilia models:
RSV4 RR/RF from 2017
RSV4 1100 from 2019
Tuono V4 RR/Factory from 2017
Item #: X46KSARSV40
Condition:
New
Aim Supply has been severely affected due to material shortages and most products are currently on a 3 month delivery date. Please send us an email request to find out ETAs.
Price: $98.00
Description:
Rotobox BOOST Front Wheel
The new and improved model BOOST carbon fiber wheel from Rotobox, decreasing the weight from the RBX2 with improved design and higher performance! Comes in gloss and matte finish, in both symmetric and convex designs.
Like the RBX2, the BOOST is produced using Rotobox's unique 3-component composite - combining carbon, epoxy and stainless steel. By integrating the stainless 2,5 mm steel wire in each side of the rim, we increase its impact resistance at the most critical outer part. JWL and DOT approved, having met JASO T203-85 safety standards.
Another hidden BOOST gem - the Structural Rib. Thanks to the High Pressure Core Technology the structural rib is placed in the inner side between the spokes, with its mission to support the stress hot spot of the wheel. As a result the BOOST elegant spoke design brings greater stiffness and although the spokes are thinner the BOOST is stronger than ever - with a permissible static load of 280 kg on the rear and 180kg on the front wheel.
ASSEMBLING COMPONENTS
Carbon fiber composite rim, a one-piece hollow carbon cast, reinforced with stainless steel wire and UV protected; 7075 T6 aluminum alloy hubs, spacers and sprocket carrier [only with rear symmetric wheel]. machined from solid and hard anodized; polyurethane cushion drive set; SKF bearings; aluminum valve stem.
PRODUCT QUALITY CONTROL
Your Rotobox wheel has its own Serial Number to track the production history. We confirm to have performed quality verification procedure of your Rotobox wheel.
SIZE
17" x 3.5"
WEIGHT
REAR WHEEL WEIGHT 2.58 kg / 5.68 LBS
MAX. STATIC LOAD
REAR 180 kg / 400 LBS
MAX. OPERATING TEMPERATURE
100 C / 212 F
MAX. PRESSURE
4 BAR / 58 PSI
The wheels conform to safety standard JASO T203-85 for JWL dotE Certification. Before riding on public streets, be sure to check your local regulations.
Rotobox Boost Wheel set Weight example:
Stock S1000RR 11.70kg (25.79 lbs)
Rotobox Boost 6.69kg (14.74 lbs)
Weight saving more than 5.00kg of rotating mass. Incredible!
The new and improved model BOOST carbon fiber wheel from Rotobox, decreasing the weight from the RBX2 with improved design and higher performance! Comes in gloss and matte finish, in both symmetric and convex designs.
Like the RBX2, the BOOST is produced using Rotobox's unique 3-component composite - combining carbon, epoxy and stainless steel. By integrating the stainless 2,5 mm steel wire in each side of the rim, we increase its impact resistance at the most critical outer part. JWL and DOT approved, having met JASO T203-85 safety standards.
Another hidden BOOST gem - the Structural Rib. Thanks to the High Pressure Core Technology the structural rib is placed in the inner side between the spokes, with its mission to support the stress hot spot of the wheel. As a result the BOOST elegant spoke design brings greater stiffness and although the spokes are thinner the BOOST is stronger than ever - with a permissible static load of 280 kg on the rear and 180kg on the front wheel.
ASSEMBLING COMPONENTS
Carbon fiber composite rim, a one-piece hollow carbon cast, reinforced with stainless steel wire and UV protected; 7075 T6 aluminum alloy hubs, spacers and sprocket carrier [only with rear symmetric wheel]. machined from solid and hard anodized; polyurethane cushion drive set; SKF bearings; aluminum valve stem.
PRODUCT QUALITY CONTROL
Your Rotobox wheel has its own Serial Number to track the production history. We confirm to have performed quality verification procedure of your Rotobox wheel.
SIZE
17" x 3.5"
WEIGHT
REAR WHEEL WEIGHT 2.58 kg / 5.68 LBS
MAX. STATIC LOAD
REAR 180 kg / 400 LBS
MAX. OPERATING TEMPERATURE
100 C / 212 F
MAX. PRESSURE
4 BAR / 58 PSI
The wheels conform to safety standard JASO T203-85 for JWL dotE Certification. Before riding on public streets, be sure to check your local regulations.
Rotobox Boost Wheel set Weight example:
Stock S1000RR 11.70kg (25.79 lbs)
Rotobox Boost 6.69kg (14.74 lbs)
Weight saving more than 5.00kg of rotating mass. Incredible!
Item #: FA70350311
Condition:
New
Custom Product: Rotobox Products are made to order with an estimated completion time of 10-12 weeks from order placed. Delivery time is longer since we
have entered into a new industrial partnership with MV Agusta motorcycle manufacturer for the supply of wheels for original equipment on the new MV Agusta
Brutale 1000RR Assen! Although we have expanded our production capacity, we are also forced to extending the delivery time for the new orders.
Please feel free to contact us for any questions.
Free Ground Shipping
Price: $1,812.00
RSV4 RSV4EE APRC/RF Tuono V4 1100 Factory RSV1000R RSV Millie
Description:
Rotobox BOOST Symmetric Rear Wheel
The new and improved model BOOST carbon fiber wheel from Rotobox, decreasing the weight from the RBX2 with improved design and higher performance! Comes in gloss and matte finish, in both symmetric and convex designs.
Like the RBX2, the BOOST is produced using Rotobox's unique 3-component composite - combining carbon, epoxy and stainless steel. By integrating the stainless 2,5 mm steel wire in each side of the rim, we increase its impact resistance at the most critical outer part. JWL and DOT approved, having met JASO T203-85 safety standards.
Another hidden BOOST gem - the Structural Rib. Thanks to the High Pressure Core Technology the structural rib is placed in the inner side between the spokes, with its mission to support the stress hot spot of the wheel. As a result the BOOST elegant spoke design brings greater stiffness and although the spokes are thinner the BOOST is stronger than ever - with a permissible static load of 280 kg on the rear and 180kg on the front wheel.
ASSEMBLING COMPONENTS
Carbon fiber composite rim, a one-piece hollow carbon cast, reinforced with stainless steel wire and UV protected; 7075 T6 aluminum alloy hubs, spacers and sprocket carrier [only with rear symmetric wheel]. machined from solid and hard anodized; polyurethane cushion drive set; SKF bearings; aluminum valve stem.
PRODUCT QUALITY CONTROL
Your Rotobox wheel has its own Serial Number to track the production history. We confirm to have performed quality verification procedure of your Rotobox wheel.
SIZE
17" x 6.00"
WEIGHT
REAR WHEEL WEIGHT 4.11 kg / 9.06 LBS
MAX. STATIC LOAD
REAR 280 kg / 617 LBS
MAX. OPERATING TEMPERATURE
100 C / 212 F
MAX. PRESSURE
4 BAR / 58 PSI
The wheels conform to safety standard JASO T203-85 for JWL dotE Certification. Before riding on public streets, be sure to check your local regulations.
Rotobox Boost Wheel set Weight example:
Stock S1000RR 11.70kg (25.79 lbs)
Rotobox Boost 6.69kg (14.74 lbs)
Weight saving more than 5.00kg of rotating mass. Incredible!
The new and improved model BOOST carbon fiber wheel from Rotobox, decreasing the weight from the RBX2 with improved design and higher performance! Comes in gloss and matte finish, in both symmetric and convex designs.
Like the RBX2, the BOOST is produced using Rotobox's unique 3-component composite - combining carbon, epoxy and stainless steel. By integrating the stainless 2,5 mm steel wire in each side of the rim, we increase its impact resistance at the most critical outer part. JWL and DOT approved, having met JASO T203-85 safety standards.
Another hidden BOOST gem - the Structural Rib. Thanks to the High Pressure Core Technology the structural rib is placed in the inner side between the spokes, with its mission to support the stress hot spot of the wheel. As a result the BOOST elegant spoke design brings greater stiffness and although the spokes are thinner the BOOST is stronger than ever - with a permissible static load of 280 kg on the rear and 180kg on the front wheel.
ASSEMBLING COMPONENTS
Carbon fiber composite rim, a one-piece hollow carbon cast, reinforced with stainless steel wire and UV protected; 7075 T6 aluminum alloy hubs, spacers and sprocket carrier [only with rear symmetric wheel]. machined from solid and hard anodized; polyurethane cushion drive set; SKF bearings; aluminum valve stem.
PRODUCT QUALITY CONTROL
Your Rotobox wheel has its own Serial Number to track the production history. We confirm to have performed quality verification procedure of your Rotobox wheel.
SIZE
17" x 6.00"
WEIGHT
REAR WHEEL WEIGHT 4.11 kg / 9.06 LBS
MAX. STATIC LOAD
REAR 280 kg / 617 LBS
MAX. OPERATING TEMPERATURE
100 C / 212 F
MAX. PRESSURE
4 BAR / 58 PSI
The wheels conform to safety standard JASO T203-85 for JWL dotE Certification. Before riding on public streets, be sure to check your local regulations.
Rotobox Boost Wheel set Weight example:
Stock S1000RR 11.70kg (25.79 lbs)
Rotobox Boost 6.69kg (14.74 lbs)
Weight saving more than 5.00kg of rotating mass. Incredible!
Item #: RA70600714
Condition:
New
Custom Product: Rotobox Products are made to order with an estimated completion time of 10-12 weeks from order placed. Delivery time is longer since we
have entered into a new industrial partnership with MV Agusta motorcycle manufacturer for the supply of wheels for original equipment on the new MV Agusta
Brutale 1000RR Assen! Although we have expanded our production capacity, we are also forced to extending the delivery time for the new orders.
Please feel free to contact us for any questions.
Free Ground Shipping
Price: $2,410.00
Description:
COST OF SPRINGS INCLUDED IN PRICE
The Öhlins STX 46 shock absorber comes in a wide range of styles and for many different bikes in the smaller Hyper Sport segment, such as the Yamaha R3, Ninja 250 Honda CBR 250. This shock absorber features the Öhlins well-known Monotube design with its builds quality. With fully adjustable compression and rebound damping it has a great range of adjustments possible. And if you would like to have it, you can fit the shock absorber with an optional hydraulic spring preloader! The Öhlins STX 46 shock absorber brings a new way to ride your bike. With enhanced cornering performance and improved comfort it contributes to rider confidence which makes you want to go faster around the track. But the STX 46 does also work well for your daily commute and the weekend country road tour.
The Öhlins STX 46 shock absorber comes in a wide range of styles and for many different bikes in the smaller Hyper Sport segment, such as the Yamaha R3, Ninja 250 Honda CBR 250. This shock absorber features the Öhlins well-known Monotube design with its builds quality. With fully adjustable compression and rebound damping it has a great range of adjustments possible. And if you would like to have it, you can fit the shock absorber with an optional hydraulic spring preloader! The Öhlins STX 46 shock absorber brings a new way to ride your bike. With enhanced cornering performance and improved comfort it contributes to rider confidence which makes you want to go faster around the track. But the STX 46 does also work well for your daily commute and the weekend country road tour.
Item #: AP 351
Condition:
New
On-hand inventory ships within 24 hours. Please note supply-chain related delays are possible. Please contact us for ETA
Price: $1,150.00
Description:
TTX GP Shock Absorber AP 466
Based on your bike’s performance, its price and available mounting space we have designed a shock that we think suits it, both when it comes to price and performance.
We start by choosing a type which we tailor-make for your specific bike. The basic setup, the design of the shim stacks and the calibration of the adjusters, is tested both on road and track. They are the results of true tests with your bike and no guesswork!
Öhlins manufactures more than 300 different shock absorber models, each model is tailor-made for one specific bike. The concept of all Öhlins products is not a secret, it is precision. Precision provides superior control of the damping force and the key to our success.
Part number
AP 466
Type Code
T36PR1C1LB
T
Twin tube
36
Piston diameter: 36 mm
P
Monotube high pressure gas type of shock absorber with external “piggy back” reservoir.
R1
Adjustable rebound damping. Black adjuster on TTX36 shocks / silver adjuster on TTX GP shocks.
C1
Adjustable compression damping. Gold adjuster on TTX36 / TTX GP shocks.
B
Integrated hydraulic spring preload adjuster. Adjuster wheel or hexagon on the adjuster.
Technical data
| Length: | 310 +6/-0 mm |
|---|---|
| Stroke: | 67 mm |
| Rate N/mm: | 95 N/mm |
| Position: | rear |
| Mounted spring: | 21040-31 |
| Packaging unit: | pieces |
Fits for vehicles
Aprilia RSV4 (2009 – 2012)
- ABE (Germany)
Aprilia RSV4 (2013 – 2016)
- "ABE" in preparation (Germany)
Aprilia RSV4 Factory (2009 – 2016)
- ABE (Germany)
Aprilia RSV4 R (2013 – 2016)
- ABE (Germany)
Download
- Mounting Instruction Öhlins Motorcycle AP 466 (English) (313,0 KB)
- Owner´s Manual Öhlins Motorcycle TTX GP shock absorber Road Track (English) (1.970,2 KB)
- Mounting Instruction Öhlins Motorcycle AP 466 (German) (301,8 KB)
- Owner´s Manual Öhlins Motorcycle TTX GP shock absorber Road Track (German) (3.112,6 KB)
Item #: AP 466
Condition:
New
On-hand inventory ships within 24 hours. Please note supply-chain related delays are possible. Please contact us for ETA
Price: $1,499.00
Description:
Rotobox RBX2 Front Wheel
ASSEMBLING COMPONENTS
Carbon fiber composite rim, a one-piece hollow carbon cast, reinforced with stainless steel wire and UV protected; 7075 T6 aluminium alloy hubs, spacers and sprocket carrier [only with rear symmetric wheel]. machined from solid and hard anodized; polyurethane cushion drive set; SKF bearings; aluminium valve stem.
PRODUCT QUALITY CONTROL
Your Rotobox wheel has its own Serial Number to track the production history. We confirm to have performed quality verification procedure of your Rotobox wheel.
SIZE
17" x 3.5"
WEIGHT
REAR WHEEL WEIGHT 2.58 kg / 5.68 LBS
MAX. STATIC LOAD
REAR 150 kg / 330 LBS
MAX. OPERATING TEMPERATURE
100 C / 212 F
MAX. PRESSURE
4 BAR / 58 PSI
The wheels conform to safety standard JASO T203-85 for JWL dotE Certification. Before riding on public streets, be sure to check your local regulations.
The complete set of RBX2 wheels, without brake rotors and sprocket, weighs:
6,65 kg (14.6 lbs) for Kawasaki ZX10R
6,61 kg (14.5 lbs) for Aprilia RSV4
6,90 kg (15.1 lbs) for BMW S1000RR
5,35 kg (11.6 lbs) for Ducati 1199 Panigale
ASSEMBLING COMPONENTS
Carbon fiber composite rim, a one-piece hollow carbon cast, reinforced with stainless steel wire and UV protected; 7075 T6 aluminium alloy hubs, spacers and sprocket carrier [only with rear symmetric wheel]. machined from solid and hard anodized; polyurethane cushion drive set; SKF bearings; aluminium valve stem.
PRODUCT QUALITY CONTROL
Your Rotobox wheel has its own Serial Number to track the production history. We confirm to have performed quality verification procedure of your Rotobox wheel.
SIZE
17" x 3.5"
WEIGHT
REAR WHEEL WEIGHT 2.58 kg / 5.68 LBS
MAX. STATIC LOAD
REAR 150 kg / 330 LBS
MAX. OPERATING TEMPERATURE
100 C / 212 F
MAX. PRESSURE
4 BAR / 58 PSI
The wheels conform to safety standard JASO T203-85 for JWL dotE Certification. Before riding on public streets, be sure to check your local regulations.
The complete set of RBX2 wheels, without brake rotors and sprocket, weighs:
6,65 kg (14.6 lbs) for Kawasaki ZX10R
6,61 kg (14.5 lbs) for Aprilia RSV4
6,90 kg (15.1 lbs) for BMW S1000RR
5,35 kg (11.6 lbs) for Ducati 1199 Panigale
Item #: FA70350111
Condition:
New
Custom Product: Rotobox Products are made to order with an estimated completion time of 10-12 weeks from order placed. Delivery time is longer since we
have entered into a new industrial partnership with MV Agusta motorcycle manufacturer for the supply of wheels for original equipment on the new MV Agusta
Brutale 1000RR Assen! Although we have expanded our production capacity, we are also forced to extending the delivery time for the new orders.
Please feel free to contact us for any questions.
Free Ground Shipping
Price: $2,922.00
Description:
Rotobox RBX2 Symmetric Rear Wheel
ASSEMBLING COMPONENTS
Carbon fiber composite rim, a one-piece hollow carbon cast, reinforced with stainless steel wire and UV protected; 7075 T6 aluminium alloy hubs, spacers and sprocket carrier [only with rear symmetric wheel]. machined from solid and hard anodized; polyurethane cushion drive set; SKF bearings; aluminium valve stem.
PRODUCT QUALITY CONTROL
Your Rotobox wheel has its own Serial Number to track the production history. We confirm to have performed quality verification procedure of your Rotobox wheel.
SIZE
17" x 6.0"
WEIGHT
REAR WHEEL WEIGHT 4.11 kg / 9.06 LBS
MAX. STATIC LOAD
REAR 250 kg / 550 LBS
MAX. OPERATING TEMPERATURE
100 C / 212 F
MAX. PRESSURE
4 BAR / 58 PSI
The wheels conform to safety standard JASO T203-85 for JWL dotE Certification. Before riding on public streets, be sure to check your local regulations.
The complete set of RBX2 wheels, without brake rotors and sprocket, weighs:
6,65 kg (14.6 lbs) for Kawasaki ZX10R
6,61 kg (14.5 lbs) for Aprilia RSV4
6,90 kg (15.1 lbs) for BMW S1000RR
5,35 kg (11.6 lbs) for Ducati 1199 Panigale
ASSEMBLING COMPONENTS
Carbon fiber composite rim, a one-piece hollow carbon cast, reinforced with stainless steel wire and UV protected; 7075 T6 aluminium alloy hubs, spacers and sprocket carrier [only with rear symmetric wheel]. machined from solid and hard anodized; polyurethane cushion drive set; SKF bearings; aluminium valve stem.
PRODUCT QUALITY CONTROL
Your Rotobox wheel has its own Serial Number to track the production history. We confirm to have performed quality verification procedure of your Rotobox wheel.
SIZE
17" x 6.0"
WEIGHT
REAR WHEEL WEIGHT 4.11 kg / 9.06 LBS
MAX. STATIC LOAD
REAR 250 kg / 550 LBS
MAX. OPERATING TEMPERATURE
100 C / 212 F
MAX. PRESSURE
4 BAR / 58 PSI
The wheels conform to safety standard JASO T203-85 for JWL dotE Certification. Before riding on public streets, be sure to check your local regulations.
The complete set of RBX2 wheels, without brake rotors and sprocket, weighs:
6,65 kg (14.6 lbs) for Kawasaki ZX10R
6,61 kg (14.5 lbs) for Aprilia RSV4
6,90 kg (15.1 lbs) for BMW S1000RR
5,35 kg (11.6 lbs) for Ducati 1199 Panigale
Item #: RA70600514
Condition:
New
Custom Product: Rotobox Products are made to order with an estimated completion time of 10-12 weeks from order placed. Delivery time is longer since we
have entered into a new industrial partnership with MV Agusta motorcycle manufacturer for the supply of wheels for original equipment on the new MV Agusta
Brutale 1000RR Assen! Although we have expanded our production capacity, we are also forced to extending the delivery time for the new orders.
Please feel free to contact us for any questions.
Free Ground Shipping
Price: $3,410.00
S1000RR Battery
Description:
Replace YTZ & YTX Models
The lithium ATZ-10-RS is a direct replacement for these OEM battery sizes:
YTZ10S
YTZ12
YTZ14
YTX9
YTX7A-BS
YT12A-BS
The lithium ATZ-10-RS is a direct replacement for these OEM battery sizes:
YTZ10S
YTZ12
YTZ14
YTX9
YTX7A-BS
YT12A-BS
Item #: 213041
Condition:
New
Ships within 24-48 hours and ships directly from our supplier. Please note supply-chain related delays are
possible.
Price: $224.99
Description:
APEX RACING DEVELOPMENT TWO BUTTON ENGINE RACE SWITCH FOR APRILIA RSV4, TUONO (ALL YEARS)
APRD-TBERSFART
The switch is a direct plug and play replacement for OEM egnition switch for all Aprilia RSV4 and Tuono models (all years 2004-2018)
Ideal for racing and street application, to save space and weight where it matters.
Designed for 22 mm standard clip on handle bars.
Switch functions: engine run/stop (maintained red) and starter activation (momentary black.
? Designed and CNC machined in United States from aircraft grade aluminum to be the smallest and lightest on the market.
Premium, military grade buttons with gold plated contact surfaces, manufactured in United States by Otto.
Switch functions: engine run/stop (maintained red) and starter activation (momentary black.
Plug and play with OEM connector.
Ideal for racing and street application, to save space and weight where it matters.
Designed for 22 mm standard clip on handle bars.
Switch functions: engine run/stop (maintained red) and starter activation (momentary black.
? Designed and CNC machined in United States from aircraft grade aluminum to be the smallest and lightest on the market.
Premium, military grade buttons with gold plated contact surfaces, manufactured in United States by Otto.
Switch functions: engine run/stop (maintained red) and starter activation (momentary black.
Plug and play with OEM connector.
Item #: TBERSFART
Condition:
New
Factory pre-order only for all APX Racing products have 1-to-2-week ETA for production from the manufacturer. Feel free to contact us if you have any questions.
Price: $205.00
Description:
APEX RACING DEVELOPMENT TWO BUTTON ENGINE RACE SWITCH FOR APRILIA RSV4, TUONO (ALL YEARS)
TBERSFA-RSV4
TBERSFA-RSV4
Item #: TBERSFA-RSV4
Condition:
New
Factory pre-order only for all APX Racing products have 1-to-2-week ETA for production from the manufacturer. Feel free to contact us if you have any questions.
Price: $205.00
Description:
APEX RACING DEVELOPMENT TWO BUTTON ENGINE RACE SWITCH FOR APRILIA RSV4, TUONO (ALL YEARS) (BREMBO MOUNT INLINE)
APRD-TBERSFARTBMI
APRD-TBERSFARTBMI
The switch is a direct plug and play replacement for OEM ignition switch for all Aprilia RSV4 and Tuono models (all years 2004-2018)
Ideal for racing and street application, to save space and weight where it matters. This model takes weight savings to another level - only 40 grams!!! Switch is acting as a back mounting bracket for your front brake master cylinder.
Fits OEM and Brembo RCS master cylinders. Note!!! - Inline fasteners bore.
Designed for 22 mm standard clip on handle bars.
Switch functions: engine run/stop (maintained red) and starter activation (momentary black.
Designed and CNC machined in United States from aircraft grade aluminum to be the smallest and lightest on the market.
Premium, military grade buttons with gold plated contact surfaces, manufactured in United States by Otto.
Switch functions: engine run/stop (maintained red) and starter activation (momentary black.
Plug and play with OEM connector.
Ideal for racing and street application, to save space and weight where it matters. This model takes weight savings to another level - only 40 grams!!! Switch is acting as a back mounting bracket for your front brake master cylinder.
Fits OEM and Brembo RCS master cylinders. Note!!! - Inline fasteners bore.
Designed for 22 mm standard clip on handle bars.
Switch functions: engine run/stop (maintained red) and starter activation (momentary black.
Designed and CNC machined in United States from aircraft grade aluminum to be the smallest and lightest on the market.
Premium, military grade buttons with gold plated contact surfaces, manufactured in United States by Otto.
Switch functions: engine run/stop (maintained red) and starter activation (momentary black.
Plug and play with OEM connector.
Item #: TBERSFARTBMI
Condition:
New
Factory pre-order only for all APX Racing products have 1-to-2-week ETA for production from the manufacturer. Feel free to contact us if you have any questions.
Price: $205.00
Description:
APEX RACING DEVELOPMENT TWO BUTTON ENGINE RACE SWITCH FOR APRILIA RSV4, TUONO (ALL YEARS) (BREMBO MOUNT INLINE)
TBERSFA-RSV4-BMI
- The switch is a direct plug and play replacement for OEM ignition switch for all Aprilia RSV4 and Tuono models (all years 2004-2018)
- Ideal for racing and street application, to save space and weight where it matters. This model takes weight savings to another level - only 40 grams!!! Switch is acting as a back mounting bracket for your front brake master cylinder.
- Fits OEM and Brembo RCS master cylinders. Note!!! - Inline fasteners bore.
- Designed for 22 mm standard clip on handle bars.
- Switch functions: engine run/stop (maintained red) and starter activation (momentary black.
- Designed and CNC machined in United States from aircraft grade aluminum to be the smallest and lightest on the market.
- Premium, military grade buttons with gold plated contact surfaces, manufactured in United States by Otto.
- Switch functions: engine run/stop (maintained red) and starter activation (momentary black.
- Plug and play with OEM connector.
TBERSFA-RSV4-BMI
- The switch is a direct plug and play replacement for OEM ignition switch for all Aprilia RSV4 and Tuono models (all years 2004-2018)
- Ideal for racing and street application, to save space and weight where it matters. This model takes weight savings to another level - only 40 grams!!! Switch is acting as a back mounting bracket for your front brake master cylinder.
- Fits OEM and Brembo RCS master cylinders. Note!!! - Inline fasteners bore.
- Designed for 22 mm standard clip on handle bars.
- Switch functions: engine run/stop (maintained red) and starter activation (momentary black.
- Designed and CNC machined in United States from aircraft grade aluminum to be the smallest and lightest on the market.
- Premium, military grade buttons with gold plated contact surfaces, manufactured in United States by Otto.
- Switch functions: engine run/stop (maintained red) and starter activation (momentary black.
- Plug and play with OEM connector.
Item #: TBERSFA-RSV4-BMI
Condition:
New
Factory pre-order only for all APX Racing products have 1-to-2-week ETA for production from the manufacturer. Feel free to contact us if you have any questions.
Price: $205.00
Description:
APEX RACING DEVELOPMENT TWO BUTTON ENGINE RACE SWITCH FOR APRILIA RSV4, TUONO (ALL YEARS) (BREMBO MOUNT OFFSET)
TBERSFA-RSV4-BMO
- The switch is a direct plug and play replacement for OEM ignition switch for all Aprilia RSV4 and Tuono models (all years 2004-2018)
- Ideal for racing and street application, to save space and weight where it matters. This model takes weight savings to another level - only 40 grams!!! Switch is acting as a back mounting bracket for your front brake master cylinder.
- Fits OEM and Brembo RCS master cylinders. Note!!! - OFFSET fasteners bore.
- Designed for 22 mm standard clip on handle bars.
- Switch functions: engine run/stop (maintained red) and starter activation (momentary black.
- Designed and CNC machined in United States from aircraft grade aluminum to be the smallest and lightest on the market.
- Premium, military grade buttons with gold plated contact surfaces, manufactured in United States by Otto.
- Switch functions: engine run/stop (maintained red) and starter activation (momentary black.
- Plug and play with OEM connector.
TBERSFA-RSV4-BMO
- The switch is a direct plug and play replacement for OEM ignition switch for all Aprilia RSV4 and Tuono models (all years 2004-2018)
- Ideal for racing and street application, to save space and weight where it matters. This model takes weight savings to another level - only 40 grams!!! Switch is acting as a back mounting bracket for your front brake master cylinder.
- Fits OEM and Brembo RCS master cylinders. Note!!! - OFFSET fasteners bore.
- Designed for 22 mm standard clip on handle bars.
- Switch functions: engine run/stop (maintained red) and starter activation (momentary black.
- Designed and CNC machined in United States from aircraft grade aluminum to be the smallest and lightest on the market.
- Premium, military grade buttons with gold plated contact surfaces, manufactured in United States by Otto.
- Switch functions: engine run/stop (maintained red) and starter activation (momentary black.
- Plug and play with OEM connector.
Item #: TBERSFA-RSV4-BMO
Condition:
New
Factory pre-order only for all APX Racing products have 1-to-2-week ETA for production from the manufacturer. Feel free to contact us if you have any questions.
Price: $205.00
Item #: RALB110
Condition:
New
On-hand inventory ships within 24 hours: When out of stock delivery times can vary from 2 to 6 weeks Please note supply-chain related delays are possible.
Price: $279.12
Item #: RALB110R
Condition:
New
On-hand inventory ships within 24 hours: When out of stock delivery times can vary from 2 to 6 weeks Please note supply-chain related delays are
possible.
Price: $395.60
Description:
Bonamici Racing Aluminium Clutch Lever Aprilia RSV4, Factory, APRC, Tuono 1100, RS 660, Tuono 660 - Suzuki GSX-R 600/ GSX-R 750 (2006/2010), GSX-R 1000 (2005/2006) (2009/2010) - Yamaha YZF R6 (2006/>), YZF R1 (2004/>) LC010
Item #: LC010
Condition:
New
On-hand inventory ships within 24 hours: When out of stock delivery times can vary from 2 to 6 weeks Please note supply-chain related delays are
possible.
Price: $127.47
Description:
Bonamici Racing Aluminium Handlebars Diameter 51 mm lifted SM51
Bonamici Racing realizes for the major sports bikes, handlebasr that allow a sporty driving at the highest levels and a perfect feeling in all conditions.
Two version: raised 15mm and not raised, both with inclination of 6.5° degrees.
Each element of the Bonamici Racing handlebars is made from solid billet aluminium machined with cnc technology.
Bonamici Racing realizes for the major sports bikes, handlebasr that allow a sporty driving at the highest levels and a perfect feeling in all conditions.
Two version: raised 15mm and not raised, both with inclination of 6.5° degrees.
Each element of the Bonamici Racing handlebars is made from solid billet aluminium machined with cnc technology.
Item #: SM51
Condition:
New
On-hand inventory ships within 24 hours: When out of stock delivery times can vary from 2 to 6 weeks Please note supply-chain related delays are
possible.
Price: $267.03
RS660 Clipons
Description:
Bonamici Racing Aluminium Handlebars Diameter 51 mm lifted Aprilia RSV4 2021 | RS 660 SM51A
Bonamici Racing realizes for the major sports bikes, handlebasr that allow a sporty driving at the highest levels and a perfect feeling in all conditions.
Two version: raised 15mm and not raised, both with inclination of 6.5° degrees.
Each element of the Bonamici Racing handlebars is made from solid billet aluminium machined with cnc technology.
Bonamici Racing realizes for the major sports bikes, handlebasr that allow a sporty driving at the highest levels and a perfect feeling in all conditions.
Two version: raised 15mm and not raised, both with inclination of 6.5° degrees.
Each element of the Bonamici Racing handlebars is made from solid billet aluminium machined with cnc technology.
Item #: SM51A
Condition:
New
On-hand inventory ships within 24 hours: When out of stock delivery times can vary from 2 to 6 weeks Please note supply-chain related delays are
possible.
Price: $267.03
Description:
Bonamici Racing Aluminium Handlebars Diameter 51 mm unlifted SM51B
Bonamici Racing realizes for the major sports bikes, handlebasr that allow a sporty driving at the highest levels and a perfect feeling in all conditions.
Two version: raised 15mm and not raised, both with inclination of 6.5° degrees.
Each element of the Bonamici Racing handlebars is made from solid billet aluminium machined with cnc technology.
Bonamici Racing realizes for the major sports bikes, handlebasr that allow a sporty driving at the highest levels and a perfect feeling in all conditions.
Two version: raised 15mm and not raised, both with inclination of 6.5° degrees.
Each element of the Bonamici Racing handlebars is made from solid billet aluminium machined with cnc technology.
Item #: SM51B
Condition:
New
On-hand inventory ships within 24 hours: When out of stock delivery times can vary from 2 to 6 weeks Please note supply-chain related delays are
possible.
Price: $267.03
Description:
Bonamici Racing Aluminium Rearsets Aprilia RSV4 - Tuono V4 2009/2016 A003
Item #: A003
Condition:
New
On-hand inventory ships within 24 hours: When out of stock delivery times can vary from 2 to 6 weeks Please note supply-chain related delays are possible.
Price: $500.00
Description:
Bonamici Racing Aluminium TOP TRIPLE CLAMP ApriliaRSV4 - RSV4 Factory “Race” 2009/2014 PSA1R
Item #: PSA1R
Condition:
New
On-hand inventory ships within 24 hours: When out of stock delivery times can vary from 2 to 6 weeks Please note supply-chain related delays are possible.
Price: $364.84
Description:
Bonamici Racing Aluminium TOP TRIPLE CLAMP ApriliaRSV4 - RSV4 Factory “Street” 2009/2014 PSA1
Item #: PSA1
Condition:
New
On-hand inventory ships within 24 hours: When out of stock delivery times can vary from 2 to 6 weeks Please note supply-chain related delays are possible.
Price: $446.15
Description:
Aluminum lever kit Aprilia RSV4, Factory, APRC, Tuono 1100, RS 660, Tuono 660 KL010
Item #: KL010
Condition:
New
On-hand inventory ships within 24 hours: When out of stock delivery times can vary from 2 to 6 weeks
Please note supply-chain related delays are possible.
Price: $271.43
Description:
Bonamici Racing Fuel Tank Cap Aprilia RSV4 / Tuono V4 / RSV 1000 / RSV4 Factory 2004 - 2020 FC030
This Fuel Cap has been designed by Bonamici to directly replace the OEM Fuel Cap component on the Aprilia RSV4 or Tuono V4, allowing you to have faster fueling times, drastically helping in something like a pit lane environment. This Fuel Tank Cap kit is perfect for either a Trackday Warrior or even your Fair Weather Rider! Manufactured from Billet Aluminium and treated to an anodized surface finish, you can rest assured that this Fuel Tank Cap Kit will withstand the harshest of conditions while looking amazing at the same time!
This Fuel Cap has been designed by Bonamici to directly replace the OEM Fuel Cap component on the Aprilia RSV4 or Tuono V4, allowing you to have faster fueling times, drastically helping in something like a pit lane environment. This Fuel Tank Cap kit is perfect for either a Trackday Warrior or even your Fair Weather Rider! Manufactured from Billet Aluminium and treated to an anodized surface finish, you can rest assured that this Fuel Tank Cap Kit will withstand the harshest of conditions while looking amazing at the same time!
Item #: FC030
Condition:
New
On-hand inventory ships within 24 hours: When out of stock delivery times can vary from 2 to 6 weeks
Please note supply-chain related delays are possible.
Price: $117.58
Description:
Bonamici Racing Glass Spare Part Aprilia RSV4 Factory / Tuono V4 SP_DCP13
Replacement glass for instrumentation protection in in high transparency plexiglass.
Designed to prevent damages caused by falls, it‘s provided by a PMMA protective screen with anti-fog ventilation that also protects display from accidental impacts of objects such as stones.
Replacement glass for instrumentation protection in in high transparency plexiglass.
Designed to prevent damages caused by falls, it‘s provided by a PMMA protective screen with anti-fog ventilation that also protects display from accidental impacts of objects such as stones.
Item #: SP_DCP13
Condition:
New
On-hand inventory ships within 24 hours: When out of stock delivery times can vary from 2 to 6 weeks Please note supply-chain related delays are possible.
Price: $20.88
Description:
Bonamici Racing Glass Spare Part Aprilia RSV4 | Tuono V4 SP_DCP06
Replacement glass for instrumentation protection in in high transparency plexiglass.
Designed to prevent damages caused by falls, it‘s provided by a PMMA protective screen with anti-fog ventilation that also protects display from accidental impacts of objects such as stones.
Replacement glass for instrumentation protection in in high transparency plexiglass.
Designed to prevent damages caused by falls, it‘s provided by a PMMA protective screen with anti-fog ventilation that also protects display from accidental impacts of objects such as stones.
Item #: SP_DCP06
Condition:
New
On-hand inventory ships within 24 hours: When out of stock delivery times can vary from 2 to 6 weeks Please note supply-chain related delays are possible.
Price: $20.88
Description:
* Pricing is per caliper, dual disc applications must order two
NOTE: We recommend replacing piston seals when installing the ventilated Caliper Racing Pistons
NOTE: We recommend replacing piston seals when installing the ventilated Caliper Racing Pistons
Item #: BT-CRP-BK4
Condition:
New
Ships within 24-48 hours and ships directly from our supplier. Please note supply-chain related delays are possible.
Price: $199.95
Description:
Replacement Left Side Panel
Item #: A4231AF
Condition:
New
Limited Supply: Only 1 Left!
In Stock inventory ships within 24 hours. Avio Fiber has a typical eta of 4-6 weeks, Carbon Fiber can take up to 8 weeks due to production times. Please note supply-chain related delays are possible.
Price: $144.02
Sale: $79.00
Save: 45%
Save: $65.02
Description:
Replacement Right Side Panel
Item #: A4232AF
Condition:
New
Limited Supply: Only 1 Left!
In Stock inventory ships within 24 hours. Avio Fiber has a typical eta of 4-6 weeks, Carbon Fiber can take up to 8 weeks due to production times. Please note supply-chain related delays are possible.
Price: $144.02
Sale: $79.00
Save: 45%
Save: $65.02
Description:
Carbonin Carbon Fiber Air Box Inlet Tubes 2009-2020 Aprilia RSV4
Item #: CA4070
Condition:
New
In Stock inventory ships within 24 hours. Avio Fiber has a typical eta of 4-6 weeks, Carbon Fiber can take up to 8 weeks due to production times. Please note supply-chain related delays are possible.
Price: $260.03
Description:
Carbon Fiber Alternator Cover Installed With Silicon
Item #: CA4030
Condition:
New
In Stock inventory ships within 24 hours. Avio Fiber has a typical eta of 4-6 weeks, Carbon Fiber can take up to 8 weeks due to production times. Please note supply-chain related delays are possible.
Price: $133.35
Description:
Carbon Fiber Clutch Cover Installed With Silicon (Not Supplied)
Item #: CA4040
Condition:
New
In Stock inventory ships within 24 hours. Avio Fiber has a typical eta of 4-6 weeks, Carbon Fiber can take up to 8 weeks due to production times. Please note supply-chain related delays are possible.
Price: $146.69
Description:
Whether you're riding on the street or on the track it makes sense to protect your frame, swingarm and engine case covers from any possible damage:
Protects against damage
Gravel rash
Road rash
Wet Lay Carbon Fiber with Carbon Kevlar laid on the inside for added protection.
These are light-weight and do not interfere with any OEM bodywork.
These also look great and give your bike a great appearance
Protects against damage
Gravel rash
Road rash
Wet Lay Carbon Fiber with Carbon Kevlar laid on the inside for added protection.
These are light-weight and do not interfere with any OEM bodywork.
These also look great and give your bike a great appearance
Item #: CA4050
Condition:
New
In Stock inventory ships within 24 hours. Avio Fiber has a typical eta of 4-6 weeks, Carbon Fiber can take up to 8 weeks due to production times. Please note supply-chain related delays are possible.
Price: $266.70
Description:
Carbon fiber rear fender oem replacement
Item #: CA4020
Condition:
New
In Stock inventory ships within 24 hours. Avio Fiber has a typical eta of 4-6 weeks, Carbon Fiber can take up to 8 weeks due to production times. Please note supply-chain related delays are possible.
Price: $166.69
Description:
Whether you're riding on the street or on the track it makes sense to protect your frame, swingarm and engine case covers from any possible damage:
Protects against damage
Gravel rash
Road rash
Wet Lay Carbon Fiber with Carbon Kevlar laid on the inside for added protection.
These are light-weight and do not interfere with any OEM bodywork.
These also look great and give your bike a great appearance
Protects against damage
Gravel rash
Road rash
Wet Lay Carbon Fiber with Carbon Kevlar laid on the inside for added protection.
These are light-weight and do not interfere with any OEM bodywork.
These also look great and give your bike a great appearance
Item #: CA4055
Condition:
New
In Stock inventory ships within 24 hours. Avio Fiber has a typical eta of 4-6 weeks, Carbon Fiber can take up to 8 weeks due to production times. Please note supply-chain related delays are possible.
Price: $220.03
Aprilia, Cordona, Quickshifter,
Description:
Cordona GP ASG Superbike Quickshifter-Blipper, Aprilia RSV4/Tuono V4 421Spec
The new developed GP ASG Superbike sensor is a direct plug & play OEM replacement quickshifter/blipper (or **only quickshifter) for modern Superbikes and Streetbikes with an analogue 0-5v interface to the ECU.
The GP ASG Superbike sensor greatly improves the gear change performance and gives a superior distinct and smooth gear change feeling similar to top GP and WSBK systems.
The Strain Gauge technology is far more reliable than spring loaded OEM shifters and is fully weather protected.
The GP ASG Superbike is easily configurable for push or pull gear linkage (street or race gear shift).
The GP ASG Superbike 421std are AQS replacement for Aprilia RSV4, Tuono V4,DQS . See Bike List for specific model-year.
**For bikes with 0-5V interface and only quickshifter (up shift), like many Mv Agusta's, the GP ASG Superbike works fine only for up shift. If the ECU will be upgraded (flashed) with blip the GP ASG Superbike supports also down shift without problem.
>>The 421Speciale version is 100% plug & play mounted with uniballs and bike specific rod lengths.<<
The new developed GP ASG Superbike sensor is a direct plug & play OEM replacement quickshifter/blipper (or **only quickshifter) for modern Superbikes and Streetbikes with an analogue 0-5v interface to the ECU.
The GP ASG Superbike sensor greatly improves the gear change performance and gives a superior distinct and smooth gear change feeling similar to top GP and WSBK systems.
The Strain Gauge technology is far more reliable than spring loaded OEM shifters and is fully weather protected.
The GP ASG Superbike is easily configurable for push or pull gear linkage (street or race gear shift).
The GP ASG Superbike 421std are AQS replacement for Aprilia RSV4, Tuono V4,DQS . See Bike List for specific model-year.
**For bikes with 0-5V interface and only quickshifter (up shift), like many Mv Agusta's, the GP ASG Superbike works fine only for up shift. If the ECU will be upgraded (flashed) with blip the GP ASG Superbike supports also down shift without problem.
>>The 421Speciale version is 100% plug & play mounted with uniballs and bike specific rod lengths.<<
Item #: COR-421Spec
Condition:
New
Limited Supply: Only 1 Left!
Currently our delivery times are 7 to 10 business days from time of order confirmation.
Price: $447.48
Aprilla, Ducati, Cordona, Quickshifter,
Description:
Cordona GP ASG Superbike Quickshifter-Blipper, Ducati DQS Replacement 420std
The new developed GP ASG Superbike sensor is a direct plug & play OEM replacement quickshifter/blipper (or **only quickshifter) for modern Superbikes and Streetbikes with an analogue 0-5v interface to the ECU.
The GP ASG Superbike sensor greatly improves the gear change performance and gives a superior distinct and smooth gear change feeling similar to top GP and WSBK systems.
The Strain Gauge technology is far more reliable than spring loaded OEM shifters and is fully weather protected.
The GP ASG Superbike is easily configurable for push or pull gear linkage (street or race gear shift).
The GP ASG Superbike 420std are OEM replacement for Aprilia RSV4, Tuono V4,DQS Replacement for Ducati Monster S, Multistrada 1260,Panigale V4, V4S, V4R, 1199R/1299, Supersport S. See Bike List for specific model-year.
**For bikes with 0-5V interface and only quickshifter (up shift), like many Mv Agusta's, the GP ASG Superbike works fine only for up shift. If the ECU will be upgraded (flashed) with blip the GP ASG Superbike supports also down shift without problem.
>>The 420Speciale version is 100% plug & play mounted with uniballs and bike specific rod lengths.<<
The new developed GP ASG Superbike sensor is a direct plug & play OEM replacement quickshifter/blipper (or **only quickshifter) for modern Superbikes and Streetbikes with an analogue 0-5v interface to the ECU.
The GP ASG Superbike sensor greatly improves the gear change performance and gives a superior distinct and smooth gear change feeling similar to top GP and WSBK systems.
The Strain Gauge technology is far more reliable than spring loaded OEM shifters and is fully weather protected.
The GP ASG Superbike is easily configurable for push or pull gear linkage (street or race gear shift).
The GP ASG Superbike 420std are OEM replacement for Aprilia RSV4, Tuono V4,DQS Replacement for Ducati Monster S, Multistrada 1260,Panigale V4, V4S, V4R, 1199R/1299, Supersport S. See Bike List for specific model-year.
**For bikes with 0-5V interface and only quickshifter (up shift), like many Mv Agusta's, the GP ASG Superbike works fine only for up shift. If the ECU will be upgraded (flashed) with blip the GP ASG Superbike supports also down shift without problem.
>>The 420Speciale version is 100% plug & play mounted with uniballs and bike specific rod lengths.<<
Item #: COR-420std
Condition:
New
Currently our delivery times are 7 to 10 business days from time of order confirmation.
Price: $401.35
No Image Available
Aprilia, Cordona, Quickshifter,
Description:
Cordona GP SG Switch Quickshifter, Aprilia RSV4 With PEG Sensor Quickshifter 409PEG
This will not work with your oem blipper. For blipper to work you must order 421spec
This will not work with your oem blipper. For blipper to work you must order 421spec
Item #: COR-409PEG
Condition:
New
Currently our delivery times are 7 to 10 business days from time of order confirmation.
Price: $343.85
Aprilia, Cordona, Quickshifter,
Description:
Cordona GP SG Switch Quickshifter, Aprilia RSV4/Tuono V4 -2016 Quickshifter 409
Item 409 - standard Strain Gauge GP SG Switch for Aprilia RSV4/Tuono V4 models includes;
@ strain gauge/load cell technology - no movable parts with very distinct and precise gear change
@ sensor design - fully sealed and super durable CNC high precision strain less steel sensor
@ switch quickshifter - can be set to close (t1) or open (t2) the loop for upshift
@ adaptive sensing of direction - upshift configurable for push or pull gear linkage
@ preload - adjustable from 1 to 40kg
@ automatic sensor calibration- a replacement sensor will be automatically calibrated at power up
@ magic threads- M6 right and left threads can be used in both ends
@ connector - 3-way Super Seal connector to bike ECU or PQ8 kit harness
@ 132mm aluminum rod
@ nut - stud kit
Item 409 - standard Strain Gauge GP SG Switch for Aprilia RSV4/Tuono V4 models includes;
@ strain gauge/load cell technology - no movable parts with very distinct and precise gear change
@ sensor design - fully sealed and super durable CNC high precision strain less steel sensor
@ switch quickshifter - can be set to close (t1) or open (t2) the loop for upshift
@ adaptive sensing of direction - upshift configurable for push or pull gear linkage
@ preload - adjustable from 1 to 40kg
@ automatic sensor calibration- a replacement sensor will be automatically calibrated at power up
@ magic threads- M6 right and left threads can be used in both ends
@ connector - 3-way Super Seal connector to bike ECU or PQ8 kit harness
@ 132mm aluminum rod
@ nut - stud kit
Item #: COR-409
Condition:
New
Currently our delivery times are 7 to 10 business days from time of order confirmation.
Price: $343.85
Description:
DYMAG UP7X FORGED ALUMINUM REAR WHEEL 2009-2018 APRILIA RSV4 1000
Front Dymag Aluminum UP7X Rear Wheel comes in three sizes
17 x 5.50"
17 x 6.00" (OEM)
17 x 6.25"
-Made in UK
-Average of 30% wheel weight savings vs OEM. Seen up to 40% for some models!
-Free Rear Aluminum Sprocket Included in 520, 525, 530 pitch
-Sample Total weight 12.3 lbs (ie. Dymag UP7X ZX10R Rear Wheel)
-All Dymag wheels come fitted with Black sprocket carrier, Talon gold or Black anodised sprocket and standard bearings ready to use. 90 deg valve included.
-Standard colours: Black Satin Matt ; Black Gloss ; Gunmetal Grey Gloss; White Gloss; Gold Gloss.
-Non standard colours available per special request, just send us an email!
Front Dymag Aluminum UP7X Rear Wheel comes in three sizes
17 x 5.50"
17 x 6.00" (OEM)
17 x 6.25"
-Made in UK
-Average of 30% wheel weight savings vs OEM. Seen up to 40% for some models!
-Free Rear Aluminum Sprocket Included in 520, 525, 530 pitch
-Sample Total weight 12.3 lbs (ie. Dymag UP7X ZX10R Rear Wheel)
-All Dymag wheels come fitted with Black sprocket carrier, Talon gold or Black anodised sprocket and standard bearings ready to use. 90 deg valve included.
-Standard colours: Black Satin Matt ; Black Gloss ; Gunmetal Grey Gloss; White Gloss; Gold Gloss.
-Non standard colours available per special request, just send us an email!
Item #: UP7X-REAR-APRILIA RSV4 1000 09-18
Condition:
New
Dymag- Dymag Wheels are made to order, please account for 8-to-10-week ETA for production from manufacturer. During Busy times this can take longer. Please feel free to contact us for any questions.
Free Ground Shipping
Price: $1,629.79
Description:
DYMAG UP7X FORGED ALUMINUM FRONT WHEEL 2009-2018 APRILIA RSV4 1000
Front Dymag Aluminum UP7X Front Wheel comes in one size
17 x 3.5" (standard/OEM)
-Made in UK
-Average of 30% wheel weight savings vs OEM. Seen up to 40% for some models!
-All Dymag wheels come fitted standard bearings ready to use. 90 deg valve included.
-Standard colours: Black Satin Matt ; Black Gloss ; Gunmetal Grey Gloss; White Gloss; Gold Gloss.
-Non standard colours available per special request, send us email after ordering confirming your RAL Color choice.
Front Dymag Aluminum UP7X Front Wheel comes in one size
17 x 3.5" (standard/OEM)
-Made in UK
-Average of 30% wheel weight savings vs OEM. Seen up to 40% for some models!
-All Dymag wheels come fitted standard bearings ready to use. 90 deg valve included.
-Standard colours: Black Satin Matt ; Black Gloss ; Gunmetal Grey Gloss; White Gloss; Gold Gloss.
-Non standard colours available per special request, send us email after ordering confirming your RAL Color choice.
Item #: UP7X-FRONT-APRILIA RSV4 1000 09-18
Condition:
New
Dymag- Dymag Wheels are made to order, please account for 8-to-10-week ETA for production from manufacturer. During Busy times this can take longer. Please feel free to contact us for any questions.
Free Ground Shipping
Price: $1,333.46
Description:
Extreme Components Brake calipers heatsink for Aprilia RSV4/RF (2009/2020) - BPR01G
-Made In Italy
-Research and development takes place exclusively through collaboration with the best race teams engaged for years in the most prestigious national and world competitions; And only after specific tests, does Extreme Components start the production.
-Made In Italy
-Research and development takes place exclusively through collaboration with the best race teams engaged for years in the most prestigious national and world competitions; And only after specific tests, does Extreme Components start the production.
Item #: BPR01G
Condition:
New
Limited Supply: Only 2 Left!
On-hand inventory ships within 24 hours: When out of stock delivery times can vary from 2 to 6 weeks Please note supply-chain related delays are possible.
Price: $193.75
Description:
Extreme Components Brake lever for Aprilia RSV4/RF/1100 Factory, Tuono V4/Factory (2009/2020) - PED-GP EVO LFR RSV4
-Made In Italy
-Research and development takes place exclusively through collaboration with the best race teams engaged for years in the most prestigious national and world competitions; And only after specific tests, does Extreme Components start the production.
-Made In Italy
-Research and development takes place exclusively through collaboration with the best race teams engaged for years in the most prestigious national and world competitions; And only after specific tests, does Extreme Components start the production.
Item #: PED-GP EVO LFR RSV4
Condition:
New
On-hand inventory ships within 24 hours: When out of stock delivery times can vary from 2 to 6 weeks Please note supply-chain related delays are
possible.
Price: $124.69
Description:
Extreme Components Brake side monolithic plate for Aprilia RSV4/RF/1100 Factory, Tuono V4/Factory (2009/2020) - PED-GP EVO MON DX RSV4
-Made In Italy
-Research and development takes place exclusively through collaboration with the best race teams engaged for years in the most prestigious national and world competitions; And only after specific tests, does Extreme Components start the production.
-Made In Italy
-Research and development takes place exclusively through collaboration with the best race teams engaged for years in the most prestigious national and world competitions; And only after specific tests, does Extreme Components start the production.
Item #: PED-GP EVO MON DX RSV4
Condition:
New
On-hand inventory ships within 24 hours: When out of stock delivery times can vary from 2 to 6 weeks Please note supply-chain related delays are possible.
Price: $157.50
Description:
Extreme Components Swingarm protection for Aprilia RSV4 / RF (2009/2020) - CA1755
-Made In Italy
-Research and development takes place exclusively through collaboration with the best race teams engaged for years in the most prestigious national and world competitions; And only after specific tests, does Extreme Components start the production.
-Made In Italy
-Research and development takes place exclusively through collaboration with the best race teams engaged for years in the most prestigious national and world competitions; And only after specific tests, does Extreme Components start the production.
Item #: CA1755
Condition:
New
On-hand inventory ships within 24 hours: When out of stock delivery times can vary from 2 to 6 weeks Please note supply-chain related delays are possible.
Price: $296.63
Description:
Extreme Components Engine protector for Aprilia RSV4 RF (2009/2020) - alternator - ALTER RSV4
-Made In Italy
-Research and development takes place exclusively through collaboration with the best race teams engaged for years in the most prestigious national and world competitions; And only after specific tests, does Extreme Components start the production.
-Made In Italy
-Research and development takes place exclusively through collaboration with the best race teams engaged for years in the most prestigious national and world competitions; And only after specific tests, does Extreme Components start the production.
Item #: ALTER RSV4
Condition:
New
On-hand inventory ships within 24 hours: When out of stock delivery times can vary from 2 to 6 weeks Please note supply-chain related delays are possible.
Price: $145.75
Description:
Extreme Components Engine protector for Aprilia RSV4 RF (2009/2020) - clutch - CLUTCH RSV4
-Made In Italy
-Research and development takes place exclusively through collaboration with the best race teams engaged for years in the most prestigious national and world competitions; And only after specific tests, does Extreme Components start the production.
-Made In Italy
-Research and development takes place exclusively through collaboration with the best race teams engaged for years in the most prestigious national and world competitions; And only after specific tests, does Extreme Components start the production.
Item #: CLUTCH RSV4
Condition:
New
On-hand inventory ships within 24 hours: When out of stock delivery times can vary from 2 to 6 weeks Please note supply-chain related delays are possible.
Price: $265.00
Description:
Extreme Components Gear Shift lever for Aprilia RSV4/RF/1100 Factory, Tuono V4/Factory (2009/2020)(reverse shifting) - PED-GP EVO LCR RSV4
-Made In Italy
-Research and development takes place exclusively through collaboration with the best race teams engaged for years in the most prestigious national and world competitions; And only after specific tests, does Extreme Components start the production.
-Made In Italy
-Research and development takes place exclusively through collaboration with the best race teams engaged for years in the most prestigious national and world competitions; And only after specific tests, does Extreme Components start the production.
Item #: PED-GP EVO LCR RSV4
Condition:
New
On-hand inventory ships within 24 hours: When out of stock delivery times can vary from 2 to 6 weeks Please note supply-chain related delays are possible.
Price: $82.69
Description:
Extreme Components Gear Shift lever for Aprilia RSV4/RF/1100 Factory, Tuono V4/Factory (2009/2020)(standard shifting) - PED-GP EVO LCD RSV4
-Made In Italy
-Research and development takes place exclusively through collaboration with the best race teams engaged for years in the most prestigious national and world competitions; And only after specific tests, does Extreme Components start the production.
-Made In Italy
-Research and development takes place exclusively through collaboration with the best race teams engaged for years in the most prestigious national and world competitions; And only after specific tests, does Extreme Components start the production.
Item #: PED-GP EVO LCD RSV4
Condition:
New
On-hand inventory ships within 24 hours: When out of stock delivery times can vary from 2 to 6 weeks Please note supply-chain related delays are possible.
Price: $82.69
Description:
Extreme Components Gear side monolithic plate for Aprilia RSV4/RF/1100 Factory, Tuono V4/Factory (2009/2021) - PED-GP EVO MON SX RSV4
-Made In Italy
-Research and development takes place exclusively through collaboration with the best race teams engaged for years in the most prestigious national and world competitions; And only after specific tests, does Extreme Components start the production.
-Made In Italy
-Research and development takes place exclusively through collaboration with the best race teams engaged for years in the most prestigious national and world competitions; And only after specific tests, does Extreme Components start the production.
Item #: PED-GP EVO MON SX RSV4
Condition:
New
On-hand inventory ships within 24 hours: When out of stock delivery times can vary from 2 to 6 weeks Please note supply-chain related delays are possible.
Price: $157.50
Description:
Extreme Components GP EVO rear sets kit for Aprilia RSV4/ RF / 1100 Factory / Tuono V4 / Tuono V4 1100 Factory (2009/2016) (reverse shifting) with carbon fiber heel guard (silver) - PED-GP EVO RSV416 B LCR RSV4 S
-Made In Italy
-Research and development takes place exclusively through collaboration with the best race teams engaged for years in the most prestigious national and world competitions; And only after specific tests, does Extreme Components start the production.
-Made In Italy
-Research and development takes place exclusively through collaboration with the best race teams engaged for years in the most prestigious national and world competitions; And only after specific tests, does Extreme Components start the production.
Item #: PED-GP EVO RSV416 B LCR RSV4 S
Condition:
New
On-hand inventory ships within 24 hours: When out of stock delivery times can vary from 2 to 6 weeks Please note supply-chain related delays are possible.
Price: $600.75
Description:
Extreme Components GP EVO rear sets kit for Aprilia RSV4/ RF / 1100 Factory / Tuono V4 / Tuono V4 1100 Factory (2009/2016) (standard shifting) with carbon fiber heel guard (black) - PED-GP EVO RSV416 C LCD RSV4 B
-Made In Italy
-Research and development takes place exclusively through collaboration with the best race teams engaged for years in the most prestigious national and world competitions; And only after specific tests, does Extreme Components start the production.
-Made In Italy
-Research and development takes place exclusively through collaboration with the best race teams engaged for years in the most prestigious national and world competitions; And only after specific tests, does Extreme Components start the production.
Item #: PED-GP EVO RSV416 C LCD RSV4 B
Condition:
New
On-hand inventory ships within 24 hours: When out of stock delivery times can vary from 2 to 6 weeks Please note supply-chain related delays are possible.
Price: $600.75
Description:
Extreme Components GP EVO rear sets kit for Aprilia RSV4/ RF / 1100 Factory / Tuono V4 / Tuono V4 1100 Factory (2009/2016) (standard shifting) with carbon fiber heel guard (silver) - PED-GP EVO RSV416 B LCD RSV4 S
-Made In Italy
-Research and development takes place exclusively through collaboration with the best race teams engaged for years in the most prestigious national and world competitions; And only after specific tests, does Extreme Components start the production.
-Made In Italy
-Research and development takes place exclusively through collaboration with the best race teams engaged for years in the most prestigious national and world competitions; And only after specific tests, does Extreme Components start the production.
Item #: PED-GP EVO RSV416 B LCD RSV4 S
Condition:
New
On-hand inventory ships within 24 hours: When out of stock delivery times can vary from 2 to 6 weeks Please note supply-chain related delays are possible.
Price: $600.75
Description:
Extreme Components GP EVO rear sets kit for Aprilia RSV4/ RF / 1100 Factory / Tuono V4 / Tuono V4 1100 Factory (2009/2016) (reverse shifting) with aluminium heel guard (black) - PED-GP EVO RSV416 LCR RSV4 B
-Made In Italy
-Research and development takes place exclusively through collaboration with the best race teams engaged for years in the most prestigious national and world competitions; And only after specific tests, does Extreme Components start the production.
-Made In Italy
-Research and development takes place exclusively through collaboration with the best race teams engaged for years in the most prestigious national and world competitions; And only after specific tests, does Extreme Components start the production.
Item #: PED-GP EVO RSV416 LCR RSV4 B
Condition:
New
On-hand inventory ships within 24 hours: When out of stock delivery times can vary from 2 to 6 weeks Please note supply-chain related delays are possible.
Price: $560.25
Description:
Extreme Components GP EVO rear sets kit for Aprilia RSV4/ RF / 1100 Factory / Tuono V4 / Tuono V4 1100 Factory (2009/2016) (reverse shifting) with carbon fiber heel guard (black) - PED-GP EVO RSV416 C LCR RSV4 B
-Made In Italy
-Research and development takes place exclusively through collaboration with the best race teams engaged for years in the most prestigious national and world competitions; And only after specific tests, does Extreme Components start the production.
-Made In Italy
-Research and development takes place exclusively through collaboration with the best race teams engaged for years in the most prestigious national and world competitions; And only after specific tests, does Extreme Components start the production.
Item #: PED-GP EVO RSV416 C LCR RSV4 B
Condition:
New
On-hand inventory ships within 24 hours: When out of stock delivery times can vary from 2 to 6 weeks Please note supply-chain related delays are possible.
Price: $600.75
Description:
Extreme Components GP EVO rear sets kit for Aprilia RSV4/ RF / 1100 Factory / Tuono V4 / Tuono V4 1100 Factory (2009/2016) (standard shifting) with aluminium heel guard (black) - PED-GP EVO RSV416 LCD RSV4 B
-Made In Italy
-Research and development takes place exclusively through collaboration with the best race teams engaged for years in the most prestigious national and world competitions; And only after specific tests, does Extreme Components start the production.
-Made In Italy
-Research and development takes place exclusively through collaboration with the best race teams engaged for years in the most prestigious national and world competitions; And only after specific tests, does Extreme Components start the production.
Item #: PED-GP EVO RSV416 LCD RSV4 B
Condition:
New
On-hand inventory ships within 24 hours: When out of stock delivery times can vary from 2 to 6 weeks Please note supply-chain related delays are possible.
Price: $560.25
Yamaha: R1 04-08, R1 15-22, R6 06-2016, R6 17-22, R3 17-19, R6 Mectronik, R7 2022
Description:
The Chrome Pro 2 comes in a package containing:
Chrome Pro 2
Antenna with 90 degree SMA joint for TPMS receiver
GPS receiver
Main wiring
2 TPMS receivers with adapters (optionally for 8.5mm or 11.5mm valves)
Lambda sensor BOSH LSU 4.9
Cleaning cloth
To install it you only need to choose the plug & play adapter for your motorcycle.
The Chrome Pro 2 represents the maximum evolution of the Chrome system. Designed for those who want the most from their electronics, joins the features of the Chrome Plus with a new can bus system with acquisition of over 150 channels, integrated WiFi and Bluetooth connections, complete configurability and much more. Developed from the experience gained from the collaboration with Yamaha in the WSBK, it is now available for everyone.
Chrome Pro 2
Antenna with 90 degree SMA joint for TPMS receiver
GPS receiver
Main wiring
2 TPMS receivers with adapters (optionally for 8.5mm or 11.5mm valves)
Lambda sensor BOSH LSU 4.9
Cleaning cloth
To install it you only need to choose the plug & play adapter for your motorcycle.
The Chrome Pro 2 represents the maximum evolution of the Chrome system. Designed for those who want the most from their electronics, joins the features of the Chrome Plus with a new can bus system with acquisition of over 150 channels, integrated WiFi and Bluetooth connections, complete configurability and much more. Developed from the experience gained from the collaboration with Yamaha in the WSBK, it is now available for everyone.
Item #: CROR211
Condition:
New
On-hand inventory ships within 24 hours. We place weekly orders with Alpha, If we are out of stock on an item we can have it within 2 to 3 weeks
Order now to insure you are allocated from the next shipment. Please note supply-chain related delays are possible.
Price: $2,820.00
Description:
MIVV Slip-on GP Carbon Exhaust For Aprilia Tuono V4 2010 - 2020 | RSV4 2009 - 2020 A.008.L2S
Item #: A.008.L2S
Condition:
New
Order Processed within 24-48 hours and ships directly from our supplier. Please do not choose express shipping as an option because it will not be shipped Express. All exhausts ship Ground
Price: $456.50
Description:
MWR High Efficiency & Racing Air Filter for the Aprilia RSV4 (09-14) MC-010-09-HE MC-010-09-R MC-010-09
Not a copy of the standard air filter, always searching for solutions, either it’s the performance , protection or fitment . Caution: clean and re-oil at least once a year with MWR air filter oil & cleaner . Remapping the ECU or the Fuel Control Module is recommended
Not a copy of the standard air filter, always searching for solutions, either it’s the performance , protection or fitment . Caution: clean and re-oil at least once a year with MWR air filter oil & cleaner . Remapping the ECU or the Fuel Control Module is recommended
Item #: MC-010-09-HE
Condition:
New
Ships within 24-48 hours and ships directly from our supplier. Please note supply-chain related delays are possible.
Price: $134.95
Items 1-60 of 72
- Page 1 of 2
- Next