HHR Performance » 2005, Aprilia, RSV 1000/R/FACTORY

Products for:

  • (X) Year: 2005
  • (X) Make: Aprilia
  • (X) Model: RSV 1000/R/FACTORY

View Universal items for: 2005, Aprilia, RSV 1000/R/FACTORY


Browse Products

Sort
View
 
Items 1-25 of 25
Description: Rotobox BOOST Symmetric Rear Wheel

The new and improved model BOOST carbon fiber wheel from Rotobox, decreasing the weight from the RBX2 with improved design and higher performance! Comes in gloss and matte finish, in both symmetric and convex designs.

Like the RBX2, the BOOST is produced using Rotobox's unique 3-component composite - combining carbon, epoxy and stainless steel. By integrating the stainless 2,5 mm steel wire in each side of the rim, we increase its impact resistance at the most critical outer part. JWL and DOT approved, having met JASO T203-85 safety standards.

Another hidden BOOST gem - the Structural Rib. Thanks to the High Pressure Core Technology the structural rib is placed in the inner side between the spokes, with its mission to support the stress hot spot of the wheel. As a result the BOOST elegant spoke design brings greater stiffness and although the spokes are thinner the BOOST is stronger than ever - with a permissible static load of 280 kg on the rear and 180kg on the front wheel.

ASSEMBLING COMPONENTS
Carbon fiber composite rim, a one-piece hollow carbon cast, reinforced with stainless steel wire and UV protected; 7075 T6 aluminum alloy hubs, spacers and sprocket carrier [only with rear symmetric wheel]. machined from solid and hard anodized; polyurethane cushion drive set; SKF bearings; aluminum valve stem.

PRODUCT QUALITY CONTROL
Your Rotobox wheel has its own Serial Number to track the production history. We confirm to have performed quality verification procedure of your Rotobox wheel.

SIZE
17" x 6.00"

WEIGHT
REAR WHEEL WEIGHT 4.11 kg / 9.06 LBS

MAX. STATIC LOAD
REAR 280 kg / 617 LBS

MAX. OPERATING TEMPERATURE
100 C / 212 F

MAX. PRESSURE
4 BAR / 58 PSI

The wheels conform to safety standard JASO T203-85 for JWL dotE Certification. Before riding on public streets, be sure to check your local regulations.
Rotobox Boost Wheel set Weight example:
Stock S1000RR 11.70kg (25.79 lbs)
Rotobox Boost 6.69kg (14.74 lbs)
Weight saving more than 5.00kg of rotating mass. Incredible!
Item #: RA70600714
Condition: New
FREE SHIPPING! Factory Pre Order Only for all Rotobox wheels with up to an 8 Week ETA for production. Please feel free to call us for ETA if no ‘Limited Supply’ is listed above.
Free Ground Shipping
Price: $2,195.00


Description: COST OF SPRINGS INCLUDED IN PRICE

The Öhlins STX 46 shock absorber comes in a wide range of styles and for many different bikes in the smaller Hyper Sport segment, such as the Yamaha R3, Ninja 250 Honda CBR 250. This shock absorber features the Öhlins well-known Monotube design with its builds quality. With fully adjustable compression and rebound damping it has a great range of adjustments possible. And if you would like to have it, you can fit the shock absorber with an optional hydraulic spring preloader! The Öhlins STX 46 shock absorber brings a new way to ride your bike. With enhanced cornering performance and improved comfort it contributes to rider confidence which makes you want to go faster around the track. But the STX 46 does also work well for your daily commute and the weekend country road tour.
Item #: AP 351
Condition: New
Please feel free to call us for ETA if no ‘Limited Supply’ is listed above.
Price: $1,150.00


Description: Rotobox RBX2 Front Wheel

ASSEMBLING COMPONENTS
Carbon fiber composite rim, a one-piece hollow carbon cast, reinforced with stainless steel wire and UV protected; 7075 T6 aluminium alloy hubs, spacers and sprocket carrier [only with rear symmetric wheel]. machined from solid and hard anodized; polyurethane cushion drive set; SKF bearings; aluminium valve stem.

PRODUCT QUALITY CONTROL
Your Rotobox wheel has its own Serial Number to track the production history. We confirm to have performed quality verification procedure of your Rotobox wheel.

SIZE
17" x 3.5"

WEIGHT
REAR WHEEL WEIGHT 2.58 kg / 5.68 LBS

MAX. STATIC LOAD
REAR 150 kg / 330 LBS

MAX. OPERATING TEMPERATURE
100 C / 212 F

MAX. PRESSURE
4 BAR / 58 PSI

The wheels conform to safety standard JASO T203-85 for JWL dotE Certification. Before riding on public streets, be sure to check your local regulations.
The complete set of RBX2 wheels, without brake rotors and sprocket, weighs:
6,65 kg (14.6 lbs) for Kawasaki ZX10R
6,61 kg (14.5 lbs) for Aprilia RSV4
6,90 kg (15.1 lbs) for BMW S1000RR
5,35 kg (11.6 lbs) for Ducati 1199 Panigale
Item #: FA70350111
Condition: New
FREE SHIPPING! Factory Pre Order Only for all Rotobox wheels with up to an 8 Week ETA for production. Please feel free to call us for ETA if no ‘Limited Supply’ is listed above.
Free Ground Shipping
Price: $2,730.00


Description: Rotobox RBX2 Symmetric Rear Wheel

ASSEMBLING COMPONENTS
Carbon fiber composite rim, a one-piece hollow carbon cast, reinforced with stainless steel wire and UV protected; 7075 T6 aluminium alloy hubs, spacers and sprocket carrier [only with rear symmetric wheel]. machined from solid and hard anodized; polyurethane cushion drive set; SKF bearings; aluminium valve stem.

PRODUCT QUALITY CONTROL
Your Rotobox wheel has its own Serial Number to track the production history. We confirm to have performed quality verification procedure of your Rotobox wheel.

SIZE
17" x 6.0"

WEIGHT
REAR WHEEL WEIGHT 4.11 kg / 9.06 LBS

MAX. STATIC LOAD
REAR 250 kg / 550 LBS

MAX. OPERATING TEMPERATURE
100 C / 212 F

MAX. PRESSURE
4 BAR / 58 PSI

The wheels conform to safety standard JASO T203-85 for JWL dotE Certification. Before riding on public streets, be sure to check your local regulations.
The complete set of RBX2 wheels, without brake rotors and sprocket, weighs:
6,65 kg (14.6 lbs) for Kawasaki ZX10R
6,61 kg (14.5 lbs) for Aprilia RSV4
6,90 kg (15.1 lbs) for BMW S1000RR
5,35 kg (11.6 lbs) for Ducati 1199 Panigale
Item #: RA70600514
Condition: New
FREE SHIPPING! Factory Pre Order Only for all Rotobox wheels with up to an 8 Week ETA for production. Please feel free to call us for ETA if no ‘Limited Supply’ is listed above.
Free Ground Shipping
Price: $3,180.00


Description: Vesrah Brake Pads VD-9031 RJL
-Fits Brembo M4 & M50 Calipers
-The RJL Brake Pad compound is the perfect choice for Aggressive Street Riders, Track Day Riding and Novice Racers.
Item #: VD-9031RJL
Condition: New
Delivery times for Vesrah products can vary from 3-4 weeks if not in stock. Please feel free to call us for ETA if no ‘Limited Supply’ is listed above.
Price: $148.00

Qty:

Description: Racing grips in CNC-worked Aluminum and anodyzed in 6 different colours. The kit includes: three knobs with different dimaters to modify your stroke making it more or less quick.
Item #: GR004
Condition: New
Delivery times for Accossato products can vary from 3-4 weeks if not in stock. Please feel free to call us for ETA if no ‘Limited Supply’ is listed above.
Price: $36.00

Description: Pair of clip-ons provided with metal clamp 2 half rings provided 10° inclination. The 2 half-rings system enables to easily replace the clip-ons without desmantling the fork. The bracelets are available in black and silver - many sizes available. They are made in Aluminumforged.
Item #: CP003
Condition: New
Delivery times for Accossato products can vary from 3-4 weeks if not in stock. Please feel free to call us for ETA if no ‘Limited Supply’ is listed above.
Price: $191.00


Description: Accossato Brake Pad AGPA42 (dimensions 50.9x53.9x7.3). Brake pads kit available in two compounds: ORGANIC or SINTERED. 2 pads included in the box.
Item #: AGPA42
Condition: New
Delivery times for Accossato products can vary from 3-4 weeks if not in stock. Please feel free to call us for ETA if no ‘Limited Supply’ is listed above.
Price: $21.00

Description: Accossato fixed clutch lever Made in CNC-worked alluminium. Available options: short and long. Anodyzed in 7 different colours. Compatible with applications of specific motorcycles.
Item #: ESV004
Condition: New
Delivery times for Accossato products can vary from 3-4 weeks if not in stock. Please feel free to call us for ETA if no ‘Limited Supply’ is listed above.
Price: $77.00


Description: Accossato Fork Preload Steering Nut Made in CNC-worked Aluminum and anodyzed. Available in 7 different colours. The internal hexagon is 17 mm. The ring is Compatible with applications of specific motorcycles and can fit all the nuts - they are the same size.
Item #: AD017
Condition: New
Delivery times for Accossato products can vary from 3-4 weeks if not in stock. Please feel free to call us for ETA if no ‘Limited Supply’ is listed above.
Price: $31.00

Description: Accossato Fork Preload Steering Nut Made in CNC-worked Aluminum and anodyzed. Available in 7 different colours. The internal hexagon is 22 mm. The ring is Compatible with applications of specific motorcycles and can fit all the nuts - they are the same size.
Item #: AD022
Condition: New
Delivery times for Accossato products can vary from 3-4 weeks if not in stock. Please feel free to call us for ETA if no ‘Limited Supply’ is listed above.
Price: $31.00

Description: Accossato Oil Filler Cap made in Aluminum CNC-worked and anodyzed in 7 different colours. It is Compatible with motorcycle appliations and adaptable on other motorcycles with a cap size of: M20X15
Item #: FP001
Condition: New
Delivery times for Accossato products can vary from 3-4 weeks if not in stock. Please feel free to call us for ETA if no ‘Limited Supply’ is listed above.
Price: $18.00

Description: Adjustable clip-ons with 6Degree to 10Degree inclination forniti with internal ring. The system is designed to adapt the clip-ons to different diamters of forks by easily replacing the internal bronze bearing provided - choosing from differenz sizes. They are made in CNC-worked Aluminum.
Item #: CP001
Condition: New
Delivery times for Accossato products can vary from 3-4 weeks if not in stock. Please feel free to call us for ETA if no ‘Limited Supply’ is listed above.
Price: $318.00


Description:
Stainless Steel, Floating, Gold Carrier


Supersport discs, developed to provide the highest possible performance on the road and on the track, are available with a rotor measuring 34 mm in width and oversized to 5.5 mm in thickness, fully interchangeable with the original components without any modifications. These are fully floating discs consisting of a rotor in thermally treated steel (capable of resisting extreme thermo-mechanical stress) and a housing machined from billet aluminium alloy.
In combination with Brembo Z04 brake pads these discs have won numerous SuperSport Championships, including the 2012, 2011 and 2009 editions. The complete range of Brembo SuperSport discs can also boast the approval of the renowned TUV Certification Body which means they can be used on public roads in all countries that recognise this certification.
The Supersport discs are available both with the same diameter as the original discs, to which they are totally interchangeable, as well as with greater diameter, for which the appropriate spacers must be purchased separately. For more information please contact your local dealer.
Item #: 208973725
Condition: New
Delivery times for Brembo products can vary from 1-4 weeks if not in stock. Please feel free to call us for ETA if no ‘Limited Supply’ is listed above.
Price: $569.00

Qty:

Description: Cables for Accossato Throttle controls - specific for motorcycles: Aprilia RSV 1000 Factory Dream (2004 - 2008). The cables are Compatible for Accossato Throttle control (from code MY001 to MY009)
Item #: AP002
Condition: New
Delivery times for Accossato products can vary from 3-4 weeks if not in stock. Please feel free to call us for ETA if no ‘Limited Supply’ is listed above.
Price: $97.00

Qty:

Description: DYMAG UP7X FORGED ALUMINUM FRONT WHEEL 2005-2006 APRILIA RSVR 1000
Front Dymag Aluminum UP7X Front Wheel comes in one size
17 x 3.5" (standard/OEM)

-Fits 2005-2006 APRILIA RSVR 1000
-Total Weight 7.2lbs
-All Dymag wheels come fitted standard bearings ready to use. 90 deg valve included.
-Standard colours: Black Satin Matt ; Black Gloss ; Gunmetal Grey Gloss; White Gloss; Gold Gloss.
-Non standard colours available per special request, send us email after ordering confirming your RAL Color choice.
Item #: UP7X-FRONT-APRILIA RSVR 1000 05-06
Condition: New
FREE SHIPPING! Delivery times for Dymag products can vary from 5-8 weeks if not in stock. Please feel free to call us for ETA if no ‘Limited Supply’ is listed above.
Free Ground Shipping
Price: $1,207.00


Description: DYMAG UP7X FORGED ALUMINUM REAR WHEEL 2005-2006 APRILIA RSVR 1000
Front Dymag Aluminum UP7X Rear Wheel comes in three sizes
17 x 5.50"
17 x 6.00" (OEM)
17 x 6.25"

-Free Rear Sprocket Included
-Fits 2005-2006 APRILIA RSVR 1000
-Sample Total weight 12.3 lbs (ie. Dymag UP7X ZX10R Rear Wheel)
-All Dymag wheels come fitted with Black sprocket carrier, Talon gold or Black anodised sprocket and standard bearings ready to use. 90 deg valve included.
-Standard colours: Black Satin Matt ; Black Gloss ; Gunmetal Grey Gloss; White Gloss; Gold Gloss.
-Non standard colours available per special request, just send us an email!
Item #: UP7X-REAR-APRILIA RSVR 1000 05-06
Condition: New
FREE SHIPPING! Delivery times for Dymag products can vary from 5-8 weeks if not in stock. Please feel free to call us for ETA if no ‘Limited Supply’ is listed above.
Free Ground Shipping
Price: $1,470.00


Description: Developed with the Moto America Aprilia HSBK Team Evol Technology have brought their tried and tested Rearset to all of you Aprilia Owners out there. With their signature wide peg with plenty of grip these rearsets have become a favorite for rider feel. You will never have your foot slip off these aggressive pegs.
Available in Black or mag Clear
Item #: ETP-ARA-151.1
Condition: New
Please feel free to call us for ETA if no ‘Limited Supply’ is listed above.
Price: $599.00

Qty:

Evol Technology - Evol Technology Rearsets for Aprilia Tuono RSV Mille  (All)
No Image Available
Description: Developed with the Moto America Aprilia HSBK Team Evol Technology have brought their tried and tested Rearset to all of you Aprilia Owners out there. With their signature wide peg with plenty of grip these rearsets have become a favorite for rider feel. You will never have your foot slip off these aggressive pegs.
Available in Black or mag Clear
Item #: ETP-ARA-151.2
Condition: New
Please feel free to call us for ETA if no ‘Limited Supply’ is listed above.
Price: $599.00

Qty:

Description: FEBUR WATER AND OIL RACING RADIATOR (WITHOUT OIL HOSES) RSV 1000 2004-2008 FE501
Item #: FE501
Condition: New
Delivery times for Febur products can vary from 4-6 weeks if not in stock. Please feel free to call us for ETA if no ‘Limited Supply’ is listed above.
Price: $2,200.00

Qty:

Description: MWR Performance Air Filter For Aprilia RSV 1000 (2004-08) and Tuono 1000 (2004-10) MC-010-04 MC-010-04-EVO

Not a copy of the standard air filter, always searching for solutions, either it’s the performance , protection or fitment . Caution: clean and re-oil at least once a year with MWR air filter oil & cleaner . Remapping the ECU or the Fuel Control Module is recommended
Item #: MC-010-04
Condition: New
Please feel free to call us for ETA if no ‘Limited Supply’ is listed above.
Price: $91.95

Qty:

Description: *NEW Rotobox Bullet Forged Carbon Fiber Front Wheel Size 17"X 3.5"

Rotobox has extended its carbon motorcycle wheel product line by unveiling the Rotobox Bullet, the new thin spoke, ultra-light forged carbon wheel at EICMA. Rotobox is one of the leading companies in the development of lightweight high-performance carbon automotive wheels. It is also a company not satisfied with just keeping up with trends but setting them.

The wheels conform to safety standard JASO T203-85 for JWL dotE Certification. Before riding on public streets, be sure to check your local regulations.
Item #: F70350B311
Condition: New
FREE SHIPPING! Factory Pre Order Only for all Rotobox wheels with up to an 8 Week ETA for production. Please feel free to call us for ETA if no ‘Limited Supply’ is listed above.
Free Ground Shipping
Price: $1,695.00


Description: *NEW Rotobox Bullet Forged Carbon Fiber Rear Wheel Size 17"X 6"
REAR WHEEL Weight
4.06 kg (8.95 lbs)

Includes Sprocket Carrier and Cush Drive Rubbers

Rotobox has extended its carbon motorcycle wheel product line by unveiling the Rotobox Bullet, the new thin spoke, ultra-light forged carbon wheel at EICMA. Rotobox is one of the leading companies in the development of lightweight high-performance carbon automotive wheels. It is also a company not satisfied with just keeping up with trends but setting them.

The wheels conform to safety standard JASO T203-85 for JWL dotE Certification. Before riding on public streets, be sure to check your local regulations.

UV PROTECTIVE COATING:
The carbon cast is protected from radiation with a very thin layer of special clear UV protective coating. Together with the clear and smooth rim surface it ensures the wheel a zero notch effect.

HIGH QUALITY CENTER PARTS:
For each motorcycle model the hubs are CNC machined from high quality 7075 T6 aluminum alloy used in the aviation industry, anodized into optional color and permanently assembled to the carbon rim.

SOLID THIN SPOKES:
To create solid thin spokes we use special carbon fiber yarn developed for military use.

THREE-COMPONENT-COMPOSITE:
Produced using Rotobox's unique 3 component composite - combining carbon, epoxy and stainless steel. The stainless 2,5 mm steel wire is integrated in each side of the rim increasing its impact resistance at the most critical outer part.

Titanium Hex Head Bolts M10x1.5x25mm:
Made from Aircraft Spec Grade 5 Titanium Alloy. Special high performance design by Rotobox. Precision machined with rolled threads and completely corrosion free. Excellent durability and minimum weight, 45% lighter than steel equivalents. Available optionally with the wheels.

CHOPPED CARBON FIBERS MEETS WOVEN FABRIC:
Rotobox's unique technology enables combining chopped carbon fibers with woven fabric seamlessly in one-piece monocoque.

PENTAGON SHAPED HUB:
The hub is locked into the carbon part with pentagon shape for ultimate transmission of torque.
Item #: R70600B714
Condition: New
FREE SHIPPING! Factory Pre Order Only for all Rotobox wheels with up to an 8 Week ETA for production. Please feel free to call us for ETA if no ‘Limited Supply’ is listed above.
Free Ground Shipping
Price: $2,295.00


Description: Suter Racing Suterclutch Aprilia RSV 1000 / TUONO 1000 004-37003

• First choice for more than 20 years in WSBK, MotoGP & MXGP championships
• The BTL (Back Torque Limiter) slipper clutch has been designed and developed to allow traction to be adjusted to accommodate different riding conditions. The Suter Clutch reduces the threat of over-revving the engine and maximizes the suspension performance.
• Quick off the start line due to a better clutch control
• Smoother braking phase over big bumps
• Less power required to operate the clutch
• Proven faster lap times
• More precise corner entry
• Higher corner speed
• Adjusted in conjunction with chassis and suspension set up the slipper clutch encourages smooth deceleration into corners and controlled acceleration out of corners.
• Anti hopping (basic principle): Prevents locking of the rear wheel during the coupling process and thus the loss of traction
• Produces a significantly softened braking phase before corners
• The Anti-hopping effect can be adjusted for every riding style; for tuned models, there is a range of harder main springs available to order. Included with delivery are all the relevant parts for installation, plus two additional Anti-hopping springs.
• The SuterClutch is highly impressive through its excellent responsiveness, the efficient inner lubrication, and its easy installation. The unique color of this clutch results from the hard-anodized Teflon coating, which considerably minimizes the wear on the friction surfaces.
• Fully adjustable to personal riding style
• There are two editions for the SuterClutch available: The MX-Line and the BTL-Line. Unlike the BTL-Line, the MX clutch comes without the anti-hopping mechanism.
• Through its ingenious design, you can fit it without any special installation tools. The pressure plate is installed using 6 bolts, allowing easy access for maintenance.
• Quick to install without special tools
Item #: 004-37003
Condition: New
Delivery times for Suter products can vary from 2-3 weeks if not in stock. Please feel free to call us for ETA if no ‘Limited Supply’ is listed above.
Price: $1,050.00
Sale: $945.00
Save: 10%
Save: $105.00


Description: Translogic QSXi Quickshifter 2004-2008 Aprilia RSV & RSVR TLS-QSXi-V-DCS

1dn 5up or 1up 5dn road or race pattern

Aprilia Quickshifter for RSV & RSVR models 2004 to 2008 (2 spark plugs) with tie rod and rear-sets with standard road shift or inverted race shift gear lever set-up QSXi Intellishift Quickshifter. Unique and powerful! Featuring our very latest superior Intellishift protocol providing the very best quickshifting possible. These advanced Intellishift quickshifters are the smallest multi-channel systems available and unlike other single channel quickshifters our latest range of Intellishift systems provide the finest MotoGP seamless shift simulation. Now with even more adjustment possibilities for professional users and throttle blipper output, its a winner!.
Item #: TLS-QSXi-V-DCS
Condition: New
Please feel free to call us for ETA if no ‘Limited Supply’ is listed above.
Price: $389.00

Qty:

Items 1-25 of 25

View Universal items for: 2005, Aprilia, RSV 1000/R/FACTORY