- Home »
- Catalog
HHR Performance » 2020, BMW, S1000RR
Products for:
- Year: 2020
- Make: BMW
- Model: S1000RR
View Universal items for: 2020 BMW S1000RR
Browse Products
Description:
Rotobox BOOST Front Wheel for BMS S1000RR K67
This wheel uses the rotors for the Standard Cast wheels so if ordering for spare wheels you will need to order the Rotors for the Cast wheel fitment
The new and improved model BOOST carbon fiber wheel from Rotobox, decreasing the weight from the RBX2 with improved design and higher performance! Comes in gloss and matte finish, in both symmetric and convex designs.
Like the RBX2, the BOOST is produced using Rotobox's unique 3-component composite - combining carbon, epoxy and stainless steel. By integrating the stainless 2,5 mm steel wire in each side of the rim, we increase its impact resistance at the most critical outer part. JWL and DOT approved, having met JASO T203-85 safety standards.
Another hidden BOOST gem - the Structural Rib. Thanks to the High Pressure Core Technology the structural rib is placed in the inner side between the spokes, with its mission to support the stress hot spot of the wheel. As a result the BOOST elegant spoke design brings greater stiffness and although the spokes are thinner the BOOST is stronger than ever - with a permissible static load of 280 kg on the rear and 180kg on the front wheel.
ASSEMBLING COMPONENTS
Carbon fiber composite rim, a one-piece hollow carbon cast, reinforced with stainless steel wire and UV protected; 7075 T6 aluminum alloy hubs, spacers and sprocket carrier [only with rear symmetric wheel]. machined from solid and hard anodized; polyurethane cushion drive set; SKF bearings; aluminum valve stem.
PRODUCT QUALITY CONTROL
Your Rotobox wheel has its own Serial Number to track the production history. We confirm to have performed quality verification procedure of your Rotobox wheel.
SIZE
17" x 3.5"
WEIGHT
REAR WHEEL WEIGHT 2.58 kg / 5.68 LBS
MAX. STATIC LOAD
REAR 180 kg / 400 LBS
MAX. OPERATING TEMPERATURE
100 C / 212 F
MAX. PRESSURE
4 BAR / 58 PSI
The wheels conform to safety standard JASO T203-85 for JWL dotE Certification. Before riding on public streets, be sure to check your local regulations.
Rotobox Boost Wheel set Weight example:
Stock S1000RR 11.70kg (25.79 lbs)
Rotobox Boost 6.69kg (14.74 lbs)
Weight saving more than 5.00kg of rotating mass. Incredible!
This wheel uses the rotors for the Standard Cast wheels so if ordering for spare wheels you will need to order the Rotors for the Cast wheel fitment
The new and improved model BOOST carbon fiber wheel from Rotobox, decreasing the weight from the RBX2 with improved design and higher performance! Comes in gloss and matte finish, in both symmetric and convex designs.
Like the RBX2, the BOOST is produced using Rotobox's unique 3-component composite - combining carbon, epoxy and stainless steel. By integrating the stainless 2,5 mm steel wire in each side of the rim, we increase its impact resistance at the most critical outer part. JWL and DOT approved, having met JASO T203-85 safety standards.
Another hidden BOOST gem - the Structural Rib. Thanks to the High Pressure Core Technology the structural rib is placed in the inner side between the spokes, with its mission to support the stress hot spot of the wheel. As a result the BOOST elegant spoke design brings greater stiffness and although the spokes are thinner the BOOST is stronger than ever - with a permissible static load of 280 kg on the rear and 180kg on the front wheel.
ASSEMBLING COMPONENTS
Carbon fiber composite rim, a one-piece hollow carbon cast, reinforced with stainless steel wire and UV protected; 7075 T6 aluminum alloy hubs, spacers and sprocket carrier [only with rear symmetric wheel]. machined from solid and hard anodized; polyurethane cushion drive set; SKF bearings; aluminum valve stem.
PRODUCT QUALITY CONTROL
Your Rotobox wheel has its own Serial Number to track the production history. We confirm to have performed quality verification procedure of your Rotobox wheel.
SIZE
17" x 3.5"
WEIGHT
REAR WHEEL WEIGHT 2.58 kg / 5.68 LBS
MAX. STATIC LOAD
REAR 180 kg / 400 LBS
MAX. OPERATING TEMPERATURE
100 C / 212 F
MAX. PRESSURE
4 BAR / 58 PSI
The wheels conform to safety standard JASO T203-85 for JWL dotE Certification. Before riding on public streets, be sure to check your local regulations.
Rotobox Boost Wheel set Weight example:
Stock S1000RR 11.70kg (25.79 lbs)
Rotobox Boost 6.69kg (14.74 lbs)
Weight saving more than 5.00kg of rotating mass. Incredible!
Item #: FA70350374
Condition:
New
Factory Pre Order Only for all Rotobox wheels with 8 Week ETA for production.
Price: $1,545.00
Description:
Rotobox BOOST Symmetric Rear Wheel
The new and improved model BOOST carbon fiber wheel from Rotobox, decreasing the weight from the RBX2 with improved design and higher performance! Comes in gloss and matte finish, in both symmetric and convex designs.
Like the RBX2, the BOOST is produced using Rotobox's unique 3-component composite - combining carbon, epoxy and stainless steel. By integrating the stainless 2,5 mm steel wire in each side of the rim, we increase its impact resistance at the most critical outer part. JWL and DOT approved, having met JASO T203-85 safety standards.
Another hidden BOOST gem - the Structural Rib. Thanks to the High Pressure Core Technology the structural rib is placed in the inner side between the spokes, with its mission to support the stress hot spot of the wheel. As a result the BOOST elegant spoke design brings greater stiffness and although the spokes are thinner the BOOST is stronger than ever - with a permissible static load of 280 kg on the rear and 180kg on the front wheel.
ASSEMBLING COMPONENTS
Carbon fiber composite rim, a one-piece hollow carbon cast, reinforced with stainless steel wire and UV protected; 7075 T6 aluminum alloy hubs, spacers and sprocket carrier [only with rear symmetric wheel]. machined from solid and hard anodized; polyurethane cushion drive set; SKF bearings; aluminum valve stem.
PRODUCT QUALITY CONTROL
Your Rotobox wheel has its own Serial Number to track the production history. We confirm to have performed quality verification procedure of your Rotobox wheel.
SIZE
17" x 6.00"
WEIGHT
REAR WHEEL WEIGHT 4.11 kg / 9.06 LBS
MAX. STATIC LOAD
REAR 280 kg / 617 LBS
MAX. OPERATING TEMPERATURE
100 C / 212 F
MAX. PRESSURE
4 BAR / 58 PSI
The wheels conform to safety standard JASO T203-85 for JWL dotE Certification. Before riding on public streets, be sure to check your local regulations.
Rotobox Boost Wheel set Weight example:
Stock S1000RR 11.70kg (25.79 lbs)
Rotobox Boost 6.69kg (14.74 lbs)
Weight saving more than 5.00kg of rotating mass. Incredible!
The new and improved model BOOST carbon fiber wheel from Rotobox, decreasing the weight from the RBX2 with improved design and higher performance! Comes in gloss and matte finish, in both symmetric and convex designs.
Like the RBX2, the BOOST is produced using Rotobox's unique 3-component composite - combining carbon, epoxy and stainless steel. By integrating the stainless 2,5 mm steel wire in each side of the rim, we increase its impact resistance at the most critical outer part. JWL and DOT approved, having met JASO T203-85 safety standards.
Another hidden BOOST gem - the Structural Rib. Thanks to the High Pressure Core Technology the structural rib is placed in the inner side between the spokes, with its mission to support the stress hot spot of the wheel. As a result the BOOST elegant spoke design brings greater stiffness and although the spokes are thinner the BOOST is stronger than ever - with a permissible static load of 280 kg on the rear and 180kg on the front wheel.
ASSEMBLING COMPONENTS
Carbon fiber composite rim, a one-piece hollow carbon cast, reinforced with stainless steel wire and UV protected; 7075 T6 aluminum alloy hubs, spacers and sprocket carrier [only with rear symmetric wheel]. machined from solid and hard anodized; polyurethane cushion drive set; SKF bearings; aluminum valve stem.
PRODUCT QUALITY CONTROL
Your Rotobox wheel has its own Serial Number to track the production history. We confirm to have performed quality verification procedure of your Rotobox wheel.
SIZE
17" x 6.00"
WEIGHT
REAR WHEEL WEIGHT 4.11 kg / 9.06 LBS
MAX. STATIC LOAD
REAR 280 kg / 617 LBS
MAX. OPERATING TEMPERATURE
100 C / 212 F
MAX. PRESSURE
4 BAR / 58 PSI
The wheels conform to safety standard JASO T203-85 for JWL dotE Certification. Before riding on public streets, be sure to check your local regulations.
Rotobox Boost Wheel set Weight example:
Stock S1000RR 11.70kg (25.79 lbs)
Rotobox Boost 6.69kg (14.74 lbs)
Weight saving more than 5.00kg of rotating mass. Incredible!
Item #: RA70600778
Condition:
New
Factory Pre Order Only for all Rotobox wheels with 8 Week ETA for production.
Price: $2,195.00
Description:
FKR Cartridge Kit Racing (TTX 25) FKR 122
The racing inspired FKR cartridge kit has technology derived straight from the Moto3, Moto 2 and World Superbike championships developed by our engineers in Sweden and is designed for high end racing.
The FKR Cartridge kit features a spring pressurized system, compared to the old gas pressurized system, the spring pressure offers a more simplistic and user friendly design that also accounts for easier maintenance. But there are more advantages of a spring pressurized system. There is no risk of gas leakage, it also gives a more consistent performance curve and allows for a more compact design. With the Öhlins TTX technology, a new designed piston and an 8mm piston shaft we reduce the pressure build-up and create a faster damping response. That gives a “linear” style of damping characteristics which create more tuning options and also increases grip and bump absorption properties while improving chassis stability.
Part number
FKR 122
Type Code
TTX25 Cartridge Kit FKR
Technical data
| Spring series: | 08790-Serie, 04744-Serie |
|---|---|
| Recommended oil: | 01309 |
| Packaging included: | springs 9.5, 10.0 & 10.5 |
Notes
It is recommended to contact an authorised ÖHLINS Service Center for installation.
Fits for vehicles
BMW S 1000 RR (2019 – 2020)
- Without "Teilegutachten" (Germany)
- Racing product, not for use on public roads
Download
- Öhlins product news BMW S1000RR 2019 (173,8 KB)
- Mounting Instructions FKR 122 English (664,3 KB)
- Owner´s Manual TTX GP shock absorber Road & Track (English) (971,6 KB)
- Öhlins Produkt News BMW S1000RR 2019 (179,4 KB)
- Owner´s Manual TTX GP shock absorber Road & Track (German) (1.098,1 KB)
Item #: FKR 122
Condition:
New
Price: $2,200.00
Description:
TTX GP Shock Absorber BM 568
Based on your bike’s performance, its price and available mounting space we have designed a shock that we think suits it, both when it comes to price and performance.
We start by choosing a type which we tailor-make for your specific bike. The basic setup, the design of the shim stacks and the calibration of the adjusters, is tested both on road and track. They are the results of true tests with your bike and no guesswork!
Öhlins manufactures more than 300 different shock absorber models, each model is tailor-made for one specific bike. The concept of all Öhlins products is not a secret, it is precision. Precision provides superior control of the damping force and the key to our success.
Part number
BM 568
Type Code
T36PR1C1LB
T
Twin tube
36
Piston diameter: 36 mm
P
Monotube high pressure gas type of shock absorber with external “piggy back” reservoir.
R1
Adjustable rebound damping. Black adjuster on TTX36 shocks / silver adjuster on TTX GP shocks.
C1
Adjustable compression damping. Gold adjuster on TTX36 / TTX GP shocks.
L
Adjustable length.
B
Integrated hydraulic spring preload adjuster. Adjuster wheel or hexagon on the adjuster.
Technical data
| Length: | 369 +2/-10 mm |
|---|---|
| Stroke: | 80 mm |
| Rate N/mm: | 54 N/mm |
| Position: | rear |
| Mounted spring: | 01096-11 |
| Spring series: | 01096-xx |
| Packaging unit: | pieces |
Fits for vehicles
BMW S 1000 RR (2019 – 2020)
- "ABE" in preparation (Germany)
Download
- Öhlins product news BMW S1000RR 2019 (173,8 KB)
- Mounting Instructions BM 568 English (268,2 KB)
- Owner´s Manual TTX GP shock absorber Road & Track (English) (1.970,2 KB)
- Öhlins Produkt News BMW S1000RR 2019 (179,4 KB)
- Mounting Instructions BM 568 German (262,5 KB)
- Owner´s Manual TTX GP shock absorber Road & Track (German) (3.112,6 KB)
Item #: BM 568
Condition:
New
Not Available
Description:
Parts Included with Kit
upper race faring (6 Dzus)
lower fairing (4 Dzus)
left side panel right side panel
single race seat/Tail unit(2 pcs)
Airbox Cover With side panels Required to install- Bracket kit for Installation (must be purchased separately) IN403B
There are 2 types of Rear Bracket kits- oem and SBK subframe
Optional Not Included -There are 3 options for seats
Basic - This seat is a 15mm neoprene foam glued to a base that is molded from the seat pan of the tail section and then attaches to the seat pan with bolts. Please not that these seat's will only fit carbonin seat pans and seat units. It will not work on any other brand. This foam will wear out like any other foam pad.
Standard - This is an upgrade to the basic seat which is covered in a neoprene material that protects the basic foam and provides the rider a level of grip but without compromising the need to slide side to side. It looks much more professional and will protect the basic foam from any wear from patches on leather suits or abuse from side to side movements. we have seen these seats go on for 3 seasons or more!
Pro Seat - This seat is for riders or teams that require their seat to provide back support or a step seat to keep them in a position from sliding too far back in the seat under acceleration, this is often done with a raised section so they can still get back in the seat in the full tuck, they are just raised up more which helps keep the butt up and their head shoulders and chest lower in the tuck. It is the same material as the standard seat but can also be customized with team logo's or race number -If you purchase a pro seat we will contact you to design your seat. Please note pro seats are made custom to order
upper race faring (6 Dzus)
lower fairing (4 Dzus)
left side panel right side panel
single race seat/Tail unit(2 pcs)
Airbox Cover With side panels Required to install- Bracket kit for Installation (must be purchased separately) IN403B
There are 2 types of Rear Bracket kits- oem and SBK subframe
Optional Not Included -There are 3 options for seats
Basic - This seat is a 15mm neoprene foam glued to a base that is molded from the seat pan of the tail section and then attaches to the seat pan with bolts. Please not that these seat's will only fit carbonin seat pans and seat units. It will not work on any other brand. This foam will wear out like any other foam pad.
Standard - This is an upgrade to the basic seat which is covered in a neoprene material that protects the basic foam and provides the rider a level of grip but without compromising the need to slide side to side. It looks much more professional and will protect the basic foam from any wear from patches on leather suits or abuse from side to side movements. we have seen these seats go on for 3 seasons or more!
Pro Seat - This seat is for riders or teams that require their seat to provide back support or a step seat to keep them in a position from sliding too far back in the seat under acceleration, this is often done with a raised section so they can still get back in the seat in the full tuck, they are just raised up more which helps keep the butt up and their head shoulders and chest lower in the tuck. It is the same material as the standard seat but can also be customized with team logo's or race number -If you purchase a pro seat we will contact you to design your seat. Please note pro seats are made custom to order
Item #: CB42100
Condition:
New
These are not designed to fit with any of the OEM panels
Price: $2,848.61
Description:
Welcome to the latest development in superbike suspension, introducing the high side saving OVERSUSPENSION from Supreme Technology based in Italy. As seen on the WSBK Barni Racing Ducati V4!
This will fit all BMW S1000RR including S1000R and S1000XR and HP4 years as it follows the same principle
This new patented device is called "Oversuspension" - OverSuspension is a special resonator capable of removing the resonances of the rear swingarm group and giving the vehicle more stability, traction, braking and comfort, as well as facilitating the dynamic operation of the suspension, and greatly improving driving safety in every condition, for example reducing the possibility of highside on the track by up to 90%.
This will fit all BMW S1000RR including S1000R and S1000XR and HP4 years as it follows the same principle
This new patented device is called "Oversuspension" - OverSuspension is a special resonator capable of removing the resonances of the rear swingarm group and giving the vehicle more stability, traction, braking and comfort, as well as facilitating the dynamic operation of the suspension, and greatly improving driving safety in every condition, for example reducing the possibility of highside on the track by up to 90%.
Item #: OVS-STB/BMW1000RR
Condition:
New
Price: $429.95
Description:
Parts Included with Kit
upper race faring (6 Dzus)
lower fairing (4 Dzus)
left side panel right side panel
single race seat/Tail unit(2 pcs)
Airbox Cover With side panels Required to install- Bracket kit for Installation (must be purchased separately) IN403B
There are 2 types of Rear Bracket kits- oem and SBK subframe
There are 3 options for seats
Basic - This seat is a 15mm neoprene foam glued to a base that is molded from the seat pan of the tail section and then attaches to the seat pan with bolts. Please not that these seat's will only fit carbonin seat pans and seat units. It will not work on any other brand. This foam will wear out like any other foam pad.
Standard - This is an upgrade to the basic seat which is covered in a neoprene material that protects the basic foam and provides the rider a level of grip but without compromising the need to slide side to side. It looks much more professional and will protect the basic foam from any wear from patches on leather suits or abuse from side to side movements. we have seen these seats go on for 3 seasons or more!
Pro Seat - This seat is for riders or teams that require their seat to provide back support or a step seat to keep them in a position from sliding too far back in the seat under acceleration, this is often done with a raised section so they can still get back in the seat in the full tuck, they are just raised up more which helps keep the butt up and their head shoulders and chest lower in the tuck. It is the same material as the standard seat but can also be customized with team logo's or race number -If you purchase a pro seat we will contact you to design your seat. Please note pro seats are made custom to order
Please Note OEM air intake will need to be modified to fit race bodywork. It is recommended to use the racing fairing bracket and air intake tube
upper race faring (6 Dzus)
lower fairing (4 Dzus)
left side panel right side panel
single race seat/Tail unit(2 pcs)
Airbox Cover With side panels Required to install- Bracket kit for Installation (must be purchased separately) IN403B
There are 2 types of Rear Bracket kits- oem and SBK subframe
There are 3 options for seats
Basic - This seat is a 15mm neoprene foam glued to a base that is molded from the seat pan of the tail section and then attaches to the seat pan with bolts. Please not that these seat's will only fit carbonin seat pans and seat units. It will not work on any other brand. This foam will wear out like any other foam pad.
Standard - This is an upgrade to the basic seat which is covered in a neoprene material that protects the basic foam and provides the rider a level of grip but without compromising the need to slide side to side. It looks much more professional and will protect the basic foam from any wear from patches on leather suits or abuse from side to side movements. we have seen these seats go on for 3 seasons or more!
Pro Seat - This seat is for riders or teams that require their seat to provide back support or a step seat to keep them in a position from sliding too far back in the seat under acceleration, this is often done with a raised section so they can still get back in the seat in the full tuck, they are just raised up more which helps keep the butt up and their head shoulders and chest lower in the tuck. It is the same material as the standard seat but can also be customized with team logo's or race number -If you purchase a pro seat we will contact you to design your seat. Please note pro seats are made custom to order
Please Note OEM air intake will need to be modified to fit race bodywork. It is recommended to use the racing fairing bracket and air intake tube
Item #: CB42100AF
Condition:
New
Limited Supply: Only 1 Left!
These are not designed to fit with any of the OEM panels
Price: $1,435.10
Description:
SUTER SLIPPER CLUTCH
Item #: 004-44009
Condition:
New
Limited Supply: Only 2 Left!
Price: $995.00
Description:
2020 S1000rr front fender for racing
Item #: CB4010AF
Condition:
New
Limited Supply: Only 5 Left!
Price: $133.35
Description:
S1000rr rear fender in avio fiber
Item #: B4020AF
Condition:
New
Price: $125.73
Description:
Lightweight Carbon fender Oem Replacement
Item #: CB4010
Condition:
New
Limited Supply: Only 3 Left!
Price: $248.41
Description:
Carbon fiber rear fender oem replacement
Item #: CB4020
Condition:
New
Limited Supply: Only 2 Left!
Price: $243.84
Price: $119.99
Description:
Quick Info
EVO4 BMW S1000RR ECU harness
Easy Install
Genuine AIM Quality
Product Details
EVO4 BMW S1000RR ECU harness
EVO4 BMW S1000RR ECU harness
Easy Install
Genuine AIM Quality
Product Details
EVO4 BMW S1000RR ECU harness
Item #: V02563200
Condition:
New
Price: $65.00
Description:
Fits all years for BMW S1000RR
Works with Solo 2
Genuine AIM Quality
Works with Solo 2
Genuine AIM Quality
Item #: X46KSBMWS1
Condition:
New
Price: $25.00
Description:
Quick Info
SOLO Harness
Works with SOLO
Genuine AIM Quality
Product Details
SOLO DL BMW S1000RR ECU interface harness
SOLO Harness
Works with SOLO
Genuine AIM Quality
Product Details
SOLO DL BMW S1000RR ECU interface harness
Item #: V02569230
Condition:
New
Price: $65.00
Description:
The flagship of the Akrapovic exhaust system range, used and tested by our top factory teams in motorsport racing. It is simply the finest performance exhaust system available. Each model is unique and dedicated to maximizing the performance of an engine, while reducing overall weight for optimized handling of the whole motorcycle. It is made entirely of titanium. The unique shape of the muffler, with its embossed imprint that run all the way along the exhaust and blend in seamlessly with the hand-crafted carbon fibre endcap, takes design to new levels.
- Titanium Full System 4:2:1
- Racing Muffler with Titanium sleeve and Carbon end cap
- Lambda O2 plug
- without dB-killer (article code AK-V-TUV111)
Comparisons to stock:
+7,7 kW bei 8400 rpm
+8,9 Nm bei 8400 rpm
-6,7 kg
*When installing the evolution system, remapping the ECU is recommended in order to prevent »check engine light« warning signal and achieve optimized performance and throttle response.
On the product image, the system is shown together with optional carbon heat shield (article code AK-P-HSB10E3). Carbon fibre muffler bracket (needed for mounting on standard subframe, if passenger footresrs are removed) is already included within the system. If the alpha Racing racing suframe is mounted we recommend our carbon muffler bracket (article code 1810B001A00).
2019-2020 K67 BMW S1000RR
The flagship of the Akrapovic exhaust system range, used and tested by our top factory teams in motorsport racing. It is simply the finest performance exhaust system available. Each model is unique and dedicated to maximizing the performance of an engine, while reducing overall weight for optimized handling of the whole motorcycle. It is made entirely of titanium. The unique shape of the muffler, with its embossed imprint that run all the way along the exhaust and blend in seamlessly with the hand-crafted carbon fibre endcap, takes design to new levels.
- Titanium Full System 4:2:1
- Racing Muffler with Titanium sleeve and Carbon end cap
- Lambda O2 plug
- without dB-killer (article code AK-V-TUV111)
Comparisons to stock:
+7,7 kW bei 8400 rpm
+8,9 Nm bei 8400 rpm
-6,7 kg
*When installing the evolution system, remapping the ECU is recommended in order to prevent »check engine light« warning signal and achieve optimized performance and throttle response.
On the product image, the system is shown together with optional carbon heat shield (article code AK-P-HSB10E3). Carbon fibre muffler bracket (needed for mounting on standard subframe, if passenger footresrs are removed) is already included within the system. If the alpha Racing racing suframe is mounted we recommend our carbon muffler bracket (article code 1810B001A00).
Item #: AK-S-B10E9-APLT
Condition:
New
Price: $2,496.00
Description:
Alpha Racing Akrapovic carbon fiber heat shield, S1000RR 2020-
Item #: AK-P-HSB10E3
Condition:
New
Price: $127.22
Description:
Akrapovic Muffler Bracket (Carbon) BMW S1000RR 2020
Item #: P-MBB10E1/1
Condition:
New
Price: $168.28
Sale: $151.45
Save: 10%
Save: $16.83
Description:
Alpha Racing Akrapovic Racing Line SS / Ti 2020 K67 BMW S1000RR, racing exhaust system, stainless steel collectors, titanium muffler with carbon end cap
Item #: AK-S-B10R4-APLT
Condition:
New
Price: $1,884.00
Description:
Akrapovic Slip-On Line (Carbon) BMW S1000RR 2020
Item #: S-B10SO10-ZC
Condition:
New
Price: $900.00
Sale: $810.00
Save: 10%
Save: $90.00
Description:
Slip-On Line (Titanium) GP style
S-B10SO11-CBT
S-B10SO11-CBT
Item #: S-B10SO11-CBT
Condition:
New
Price: $756.00
Sale: $680.40
Save: 10%
Save: $75.60
Description:
Clutch cover racing, for BMW S1000 RR 2020 (K67), reinforced version
Item #: 1114B010A00
Condition:
New
Price: $515.80
Description:
Sprocket 520 T=15, for BMW S 1000 RR 2019- (K67
Item #: 2772B001A15
Condition:
New
Price: $35.69
Description:
Alpha Racing 'SBK' Subframe 2020 K67 BMW S1000RR, The main difference with this milled subframe is that is made of aluminium 7075-T6 with shot-peening-treatment which allows for much higher strength and durability
-This is the same one the BMW WorldSBK team uses
-Same Fitment as the Racing Subframe they make, just much stronger.
-This is the same one the BMW WorldSBK team uses
-Same Fitment as the Racing Subframe they make, just much stronger.
Item #: 46DA00202
Condition:
New
Price: $1,620.00
Description:
Slim 2D rear suspension sensor 75 mm, for BMW S 1000 RR 2019- (K67) and HP4 Race, Linear potentiometer Slim Body, to be used with M Race Calibration Kit (K67)
Item #: 7470HP002A00
Condition:
New
Price: $514.80
Description:
2D front spring travel sensor 175 mm, for BMW S 1000 RR 2019- (K67), linear potentiometer, in connection with M Race Calibration Kit and OEM wiring harness, 3-pin MQS plug
Item #: 7470HP004A00
Condition:
New
Price: $547.20
Description:
Sprocket 520 T16, for BMW S 1000 RR 2019- (K67)
Item #: 2772B001A16
Condition:
New
In Stock
Price: $35.69
Description:
Sprocket 520 T=17, for BMW S 1000 RR 2019- (K67)
Item #: 2772B001A17
Condition:
New
Limited Supply: Only 1 Left!
In Stock
Price: $35.69
Description:
Racing clamp Style Clipons for S1000RR
Item #: 3271A213B00
Condition:
New
Price: $299.99
Description:
Bike cover, black/silver, with alpha Racing and S 1000 RR logo in silver, transportation bag incl.
Item #: 8005A001A00
Condition:
New
Limited Supply: Only 3 Left!
Price: $129.00
Description:
Bracket GPS antenna, for BMW S1000RR 2020- (K67), for the mounting on the dashboard carrier
Item #: 6111B010A00
Condition:
New
Price: $54.46
Description:
Alpha Racing Brake Allen Head Bolt M8x40, DIN 7984
Replacement parts for AlphaRacing Rearsets 2020 BMW S1000RR K67
Replacement parts for AlphaRacing Rearsets 2020 BMW S1000RR K67
Item #: 0711A008C07
Condition:
New
Price: $1.20
No Image Available
Description:
Alpha Racing Brake Allen Head Bolt M8x55, DIN 7984
Replacement parts for AlphaRacing Rearsets 2020 BMW S1000RR K67
Replacement parts for AlphaRacing Rearsets 2020 BMW S1000RR K67
Item #: 0711A008C10
Condition:
New
Price: $1.20
Description:
Alpha Racing Brake fluid reservoir kit 15 ml 2020 K67 BMW S1000RR
Brake fluid reservoir kit rear 15 ml, for BMW S 1000 RR 2019-(K67), for OEM or racing rearset
Brake fluid reservoir kit rear 15 ml, for BMW S 1000 RR 2019-(K67), for OEM or racing rearset
Item #: 3272B052A00
Condition:
New
Price: $54.46
Description:
Brake lever guard, for BMW S 1000 RR 2019- (K67), clamped, CNC machined, aluminum, black anodised, with alpha Racing logo
Item #: 3272B002A00
Condition:
New
Limited Supply: Only 3 Left!
Price: $149.53
Description:
Front brake disc 320 x 5,5 mm EVO, left, for BMW S 1000 RR 2019- (K67), fits Cast wheels and Rotobox
Item #: 3411B201A01
Condition:
New
Limited Supply: Only 2 Left!
Price: $373.89
Description:
Front brake disc 320 x 5,5 mm EVO, Right, for BMW S 1000 RR 2019-20 (K67), fits Cast wheels and Rotobox Wheels
Item #: 3411B201A02
Condition:
New
Price: $373.91
Description:
Carbon Fiber Sprocket cover for BMW S1000 RR 2020 (K67), carbon-prepreg-material, Made in autoclave
Item #: 4663B001B40
Condition:
New
Price: $217.69
Description:
Alpha Racing Chain adjuster kit EVO black, for BMW S1000RR 2020 (K67), milled aluminium, black anodized
Item #: 3316-B201-A01
Condition:
New
Price: $265.00
Description:
Alpha Racing Chain adjuster kit EVO black, for BMW S1000RR 2020 (K67), milled aluminium, Blue colored anodized
Item #: 3316-B201-A07
Condition:
New
Price: $265.00
Description:
Alpha Racing Chain adjuster kit EVO black, for BMW S1000RR 2020 (K67), milled aluminium, red colored anodized
Item #: 3316-B201-A06
Condition:
New
Price: $265.00
Description:
Alpha Racing Chain adjuster kit EVO black, for BMW S1000RR 2020 (K67), milled aluminium, titanium colored anodized
Item #: 3316-B201-A04
Condition:
New
Price: $265.00
Description:
Clamping clamp for upper triple clamp, right, for BMW S 1000 RR 2019- (K67), with use of racing cleat, FIM homologated
With the new design of triple clamp/handle bars on the 2019/20 S1000RR the bar is part of the outside clamp. It needs to be removed to be able to use racing clipons
Available separately as replacement or as a set
- FIM homologated
2019-2020 K67 BMW S1000RR
Clamping clamp for upper triple clamp, right, for BMW S 1000 RR 2019- (K67), with use of racing cleat, FIM homologated
With the new design of triple clamp/handle bars on the 2019/20 S1000RR the bar is part of the outside clamp. It needs to be removed to be able to use racing clipons
Available separately as replacement or as a set
- FIM homologated
Item #: 31428388983/31428388984
Condition:
New
Price: $177.84
Description:
Clutch cable kit Motorsport, for BMW S1000RR 2020- (K67), incl. Motorsport clutch cable, counter bracket and release lever
Item #: 2152B003A00
Condition:
New
Price: $266.21
Description:
Cover kit SAS, for BMW S1000RR 2020- (K67), when SAS valve is removed, for valve cover, black anodized, with alpha Racing Logo
Item #: 1172B001A00
Condition:
New
Price: $84.70
Description:
Cover secondary air system - airbox, for BMW S 1000 RR 2020- (K67), if SAS valve is removed
Item #: 1173B001A00
Condition:
New
Price: $56.44
Description:
Dashboard and fairing carrier for OEM dashboard, for BMW S 1000 RR 2019- (K67), aluminium, black anodised, multipiece screwed
Item #: 4663DA00600
Condition:
New
Limited Supply: Only 2 Left!
Price: $397.00
Description:
Dashboard and fairing carrier for Motec dashboard, for BMW S 1000 RR 2019- (K67), aluminum welded, 4-piece screwed, available for pre-order
Item #: 4663B052A00
Condition:
New
Price: $260.87
Description:
Dashboard and fairing carrier for Motec C125 dashboard, for BMW S 1000 RR 2019- (K67), aluminum, black anodized, multi piece screwed
Lightweight aluminum dashboard and front fairing carrier to be used with the Motec C125 dashboard.
- 3mm aluminum
- black anodized
- 6-part, screwed
- with sockets for expanding rivets
- for race track use only
Used by BMW Motorrad WorldSBK Team.
weight: 0,615 kg
Delivery
- dashboard and fairing carrier
Modified vehicle parts
- race fairing is recommended
- stock fairing and side mirrors can not be used anymore
2019-2020 K67 BMW S1000RR
Dashboard and fairing carrier for Motec C125 dashboard, for BMW S 1000 RR 2019- (K67), aluminum, black anodized, multi piece screwed
Lightweight aluminum dashboard and front fairing carrier to be used with the Motec C125 dashboard.
- 3mm aluminum
- black anodized
- 6-part, screwed
- with sockets for expanding rivets
- for race track use only
Used by BMW Motorrad WorldSBK Team.
weight: 0,615 kg
Delivery
- dashboard and fairing carrier
Modified vehicle parts
- race fairing is recommended
- stock fairing and side mirrors can not be used anymore
Item #: 4663DA00803
Condition:
New
Price: $397.00
Description:
Dashboard and fairing carrier for OEM dashboard, for BMW S 1000 RR 2019- (K67), aluminum welded, 4-piece screwed, available for pre-order
Lightweight aluminum dashboard and front fairing carrier to be used with the original dashboard.
- 4-part, screwed
- with sockets for expanding rivets
- for race track use only
Please note: Illustration similar
weight: kg
Delivery
- dashboard and fairing carrier
Modified vehicle parts
- race fairing is recommended
- stock fairing and side mirrors can not be used anymore
2019-2020 K67 BMW S1000RR
Dashboard and fairing carrier for OEM dashboard, for BMW S 1000 RR 2019- (K67), aluminum welded, 4-piece screwed, available for pre-order
Lightweight aluminum dashboard and front fairing carrier to be used with the original dashboard.
- 4-part, screwed
- with sockets for expanding rivets
- for race track use only
Please note: Illustration similar
weight: kg
Delivery
- dashboard and fairing carrier
Modified vehicle parts
- race fairing is recommended
- stock fairing and side mirrors can not be used anymore
Item #: 4663B050A00
Condition:
New
Price: $260.87
Description:
Alpha Racing Distance bushings OEM rear wheel, for BMW S 1000 RR 2020- (K67), for forged and carbon wheel, CNC machined, made from high quality aluminum, black anodized
Item #: 3631B019A00
Condition:
New
Price: $72.00
Description:
Oil filler plug alpha Racing BMW S1000RR, M24x2, pre-drilled for safety wiring, black anodized stainless steel safety wire with clip and bracket, engine cover screw
PICTURES IS ONLY FOR REFERENCE
Oil filler plug alpha Racing BMW S1000RR, M24x2, pre-drilled for safety wiring, black anodized stainless steel safety wire with clip and bracket, engine cover screw
Item #: 1143A000A00
Condition:
New
Limited Supply: Only 0 Left!
Price: $32.06
Description:
Brake pad set Duo Carbon Racing, front, for BMW S 1000 RR (K67), 2 pads per unit, pad thickness 8,31 mm, plate thickness 4,00 mm, for OEM calipers
Item #: 3411B501B00
Condition:
New
Price: $64.80
NEW!
Description:
E-throttle kit SBK Version for BMW S1000 RR 2020 (K67), throttle travel 65° +/-5°, aluminum housing, for M Race Calibration Kit ONLY
Item #: 6131B002A00
Condition:
New
Price: $468.00
Description:
Latest E-throttle set, version 2019, for BMW S1000RR 2015-2019 and 2020+ (K67), aluminum housing, including a pair of Renthal rubber grips (medium compound)
Item #: 6131B001A00
Condition:
New
Price: $575.00
Description:
Handlebar kit raised, for BMW S1000RR 2020 K67 for OEM front fork 55 mm
Item #: 3270-D201-T01
Condition:
New
Price: $265.00
Description:
Front brake disc 320 x 5,5 mm EVO, left, for BMW S 1000 RR 2019- (K67), fits aluminium racing wheels and M-carbon wheels
Item #: 3411B202B01
Condition:
New
Limited Supply: Only 5 Left!
Price: $422.32
Description:
Front brake disc 320 x 6 mm EVO, right, for BMW S 1000 RR 2019- (K67), for racing rim aluminum and M-carbon rims, without ABE
Item #: 3411B202B02
Condition:
New
Limited Supply: Only 2 Left!
Price: $422.32