HHR Performance » 2020, Panigale V4

Description: Street version left handlebar switch for Ducati Panigale V4/S/R.
Jetprime left handlebar switch interchangeable with the original block and applicable to the handlebars of each bike without any modification to be made.
Plug and Play product and specific for each bike.

ATTENTION: heated grips function not available.
SUPERBIKE PANIGALE V4 R (998 cc) - 2019/2020
SUPERBIKE PANIGALE V4 R (998 cc) - 2023
SUPERBIKE PANIGALE V4/S (1100 cc) - 2018/2020
SUPERBIKE PANIGALE V4/S (1100 cc) - 2021/2023

Description: MIVV Full System Titanium Exhaust For DUCATI PANIGALE V4 2018 - 2022 R.DU.0003.SDRT

Description: Made for Racing Only

Description: Qnium Radial Rear Left Hand Brake Master Cylinder 12mm

Many riders like to control the rear brake with their left hand. The Left Hand Brake gives riders optimum control over their rear brakes. The material use of the Qnium Radial Left Hand Brake is of sublime quality. Your fingers will give you a lot more feeling by braking than your foot. Qnium’s Left Hand Brake can help when you’re looking for fast lap times on the circuits. The brake feels better with your hand than with your feet. The brake can be operated with very little force. You will experience more control in the braking phase and when turning in the middle of the corner. With this radial left hand brake brake it is also possible to brake, when you steer your bike to the right and having a lean angle. For riders who want to keep the pedal brake as well as the Left Hand Brake, Qnium has also created rear brake master cylinders to compliment this setup, available with an extra banjo connection for a pass through design.

These high quality brake levers can be placed both above and below the lever of the clutch.

Used in Moto2, Moto3, and in other FIM world championships. Top Moto2 riders like Bo Bendsneyder, Thomas Luthi and Marcel Schrotter are using the Qnium Radial Left Hand Brake to get the best out of their races.

Made in Netherlands

Description: Qnium Rear Brake Master Cylinder Top Side 12mm piston w/ 40mm mount 1052300

*Please make sure to measure your mounting distance (center to center) of your existing rear brake master cylinder for proper fitment before ordering; Also please check and see if it is a integrated push rod version or not. - If you have any questions please feel free to reach out!

Typically seen:
Brembo = 40mm Mounting Distance without integrated pushrod (European bikes)
Nissin = 50mm Mounting Distance with integrated pushrod (Japanese bikes)

-Made to fit with the Qnium Rear Thumb Brake or Qnium Left Hand Brake.
-Banjo Connection: Rear foot brake is top banjo. Rear Thumb Brake / Left Hand Brake connection is Side banjo
-Banjo Type: M10x1
-40mm Mounting Distance
-12mm Piston
-Available with our without threaded push rod, please verify your type of existing rear master cylinder before purchasing. If you have any questions please feel free to reach out!

This high quality rear brake master cylinder has been specially developed for people who want to keep the rear foot brake in addition to the Qnium thumb Brake or Left Hand brake. These rear brake master cylinder comes with an extra banjo connection for the Qnium thumb brake or Left Hand brake. Of course the Qnium Rear thumb brake or Left Hand brake can also be mounted directly on the rear brake caliper without a rear brake master cylinder.

Used in Moto2, Moto3, and in other FIM world championships

Made In Netherlands

Description: *NEW Rotobox Bullet Forged Carbon Fiber Rear Wheel Size 17"X 6"
REAR WHEEL Weight
4.06 kg (8.95 lbs)

Rotobox has extended its carbon motorcycle wheel product line by unveiling the Rotobox Bullet, the new thin spoke, ultra-light forged carbon wheel at EICMA. Rotobox is one of the leading companies in the development of lightweight high-performance carbon automotive wheels. It is also a company not satisfied with just keeping up with trends but setting them.

The wheels conform to safety standard JASO T203-85 for JWL dotE Certification. Before riding on public streets, be sure to check your local regulations.

UV PROTECTIVE COATING:
The carbon cast is protected from radiation with a very thin layer of special clear UV protective coating. Together with the clear and smooth rim surface it ensures the wheel a zero notch effect.

HIGH QUALITY CENTER PARTS:
For each motorcycle model the hubs are CNC machined from high quality 7075 T6 aluminum alloy used in the aviation industry, anodized into optional color and permanently assembled to the carbon rim.

SOLID THIN SPOKES:
To create solid thin spokes we use special carbon fiber yarn developed for military use.

THREE-COMPONENT-COMPOSITE:
Produced using Rotobox's unique 3 component composite - combining carbon, epoxy and stainless steel. The stainless 2,5 mm steel wire is integrated in each side of the rim increasing its impact resistance at the most critical outer part.

Titanium Hex Head Bolts M10x1.5x25mm:
Made from Aircraft Spec Grade 5 Titanium Alloy. Special high performance design by Rotobox. Precision machined with rolled threads and completely corrosion free. Excellent durability and minimum weight, 45% lighter than steel equivalents. Available optionally with the wheels.

CHOPPED CARBON FIBERS MEETS WOVEN FABRIC:
Rotobox's unique technology enables combining chopped carbon fibers with woven fabric seamlessly in one-piece monocoque.

PENTAGON SHAPED HUB:
The hub is locked into the carbon part with pentagon shape for ultimate transmission of torque.

Description: Suter Racing Suterclutch Ducati PANIGALE 959 / 1199-1299 / V4 / DIAVEL 004-28011

• First choice for more than 20 years in WSBK, MotoGP & MXGP championships
• The BTL (Back Torque Limiter) slipper clutch has been designed and developed to allow traction to be adjusted to accommodate different riding conditions. The Suter Clutch reduces the threat of over-revving the engine and maximizes the suspension performance.
• Quick off the start line due to a better clutch control
• Smoother braking phase over big bumps
• Less power required to operate the clutch
• Proven faster lap times
• More precise corner entry
• Higher corner speed
• Adjusted in conjunction with chassis and suspension set up the slipper clutch encourages smooth deceleration into corners and controlled acceleration out of corners.
• Anti hopping (basic principle): Prevents locking of the rear wheel during the coupling process and thus the loss of traction
• Produces a significantly softened braking phase before corners
• The Anti-hopping effect can be adjusted for every riding style; for tuned models, there is a range of harder main springs available to order. Included with delivery are all the relevant parts for installation, plus two additional Anti-hopping springs.
• The SuterClutch is highly impressive through its excellent responsiveness, the efficient inner lubrication, and its easy installation. The unique color of this clutch results from the hard-anodized Teflon coating, which considerably minimizes the wear on the friction surfaces.
• Fully adjustable to personal riding style
• There are two editions for the SuterClutch available: The MX-Line and the BTL-Line. Unlike the BTL-Line, the MX clutch comes without the anti-hopping mechanism.
• Through its ingenious design, you can fit it without any special installation tools. The pressure plate is installed using 6 bolts, allowing easy access for maintenance.
• Quick to install without special tools

Description: Thermal Heat protection for fuel tanks

Teknofibra Heat shield material is designed to keep any radiant temperature from the engine or exhaust from heating up the fuel in the tank. Cooler fuel = better performance. Heat is the enemy when it comes to robbing power. Its not just only the water temperature that you need to keep cool for optimum performance, Keeping your fuel cool produces the best power and why spend that extra money on race fuel if it is not staying cool. Ever wonder why teams keep their fuel in fridges or on ice? add it at the last minute? Not to mention when it heats up it expands and it could be the difference of fitting that last 1/8th of a gallon in to finish that race! These kits come pre cut to fit your model motorcycle , all you need to do is remove any factory heat sheild material clean with a degreaser and install your Teknofibra material , It really is simple. This material is thinner and lighter than the material that comes from the factory which is a mineral based fiber. Teknofibra is unlike anything else and will not burn or catch fire, it is non toxic and has proven to keep fuel temps up to 48degrees F cooler than oem material Technical partner of JIR, Teknofibra® has long been known in the industry and used by prestigious Moto2, World Superbike, CIV and many others teams, for the following applications: Protection of fairing and belly positioned in close proximity of the exhaust pipes. Interposed between air box and throttle body allows the aspiration of cold air. Glued under the tank keeps the lower the fuel temperature. It maintains a stable temperature of the gas /oil on the nitrogen tank bladder of the dampers installed near the exhaust pipes. Protects the battery and wiring avoiding problems to the ECU. Protection of electronic components in hot areas. Under the saddle and the cowl cover It protects the rider from the heat transmitted from the engine and the exhaust system. More generally, to solve any problem of heat.

Description: TK Dischi Freno EVO Brake Rotors Ducati Panigale V4 V4S V4R 1299 D08E

As seen in Moto2, Moto3 and World Superbike! World class level rotors now available for the professional racer or track day junkie!
TK Dischi Freno EVO Ventilated Floating Rotors for Competition use only.

-Sold as a set, Left and Right
-330mm x 5.75mm
-Bobbin-less
-Exclusive Carrier Technology
-Hand-crafted from Billet Metal
-Better Cooling with angled holes in both directions
-Increased braking modulation
-Excellent pad cleaning
-Reduced residual torque
-Improved safety