- Home »
- Catalog
HHR Performance » 2021, Ninja ZX-10R
Products for:
- Year: 2021
- Model: Ninja ZX-10R
View Universal items for: 2021 Ninja ZX-10R
Browse Products
Items 1-60 of 119
- Page 1 of 2
- Next
Description:
Armour Bodies Kawasaki ZX10R 2021-23 Supersport Kit 71-0171SS
Item #: 71-0171SS
Condition:
New
Price: $954.99
Description:
Armour Bodies Kawasaki ZX10R 2021-22 Superbike Seat Base 71-0171SSB
Item #: 71-0171SSB
Condition:
New
Price: $149.99
ZX10R, carbonin, fairing, Bodywork
Description:
Kit consists of:
Upper (4 Dzus)
Lower
Left side panel (7 Dzus)
Cover left side Panel
Right side panel (7 Dzus)
Cover right side panel
Single race tail unit
Seat Unit Battery Tray
Seat Support
Right and Left wings
*Cannot fit OEM Seat
Kickstand can be used (trackday bonus)
No Options for Headlight or tail light cutouts
Upper (4 Dzus)
Lower
Left side panel (7 Dzus)
Cover left side Panel
Right side panel (7 Dzus)
Cover right side panel
Single race tail unit
Seat Unit Battery Tray
Seat Support
Right and Left wings
*Cannot fit OEM Seat
Kickstand can be used (trackday bonus)
No Options for Headlight or tail light cutouts
Item #: CK22200
Condition:
New
In Stock inventory ships within 24 hours. Avio Fiber has a typical eta of 4-6 weeks, Carbon Fiber can take up to 8 weeks due to production times. Please
note supply-chain related delays are possible.
Price: $3,181.10
Description:
Rotobox BOOST Front Wheel
The new and improved model BOOST carbon fiber wheel from Rotobox, decreasing the weight from the RBX2 with improved design and higher performance! Comes in gloss and matte finish, in both symmetric and convex designs.
Like the RBX2, the BOOST is produced using Rotobox's unique 3-component composite - combining carbon, epoxy and stainless steel. By integrating the stainless 2,5 mm steel wire in each side of the rim, we increase its impact resistance at the most critical outer part. JWL and DOT approved, having met JASO T203-85 safety standards.
Another hidden BOOST gem - the Structural Rib. Thanks to the High Pressure Core Technology the structural rib is placed in the inner side between the spokes, with its mission to support the stress hot spot of the wheel. As a result the BOOST elegant spoke design brings greater stiffness and although the spokes are thinner the BOOST is stronger than ever - with a permissible static load of 280 kg on the rear and 180kg on the front wheel.
ASSEMBLING COMPONENTS
Carbon fiber composite rim, a one-piece hollow carbon cast, reinforced with stainless steel wire and UV protected; 7075 T6 aluminum alloy hubs, spacers and sprocket carrier [only with rear symmetric wheel]. machined from solid and hard anodized; polyurethane cushion drive set; SKF bearings; aluminum valve stem.
PRODUCT QUALITY CONTROL
Your Rotobox wheel has its own Serial Number to track the production history. We confirm to have performed quality verification procedure of your Rotobox wheel.
SIZE
17" x 3.5"
WEIGHT
REAR WHEEL WEIGHT 2.58 kg / 5.68 LBS
MAX. STATIC LOAD
REAR 180 kg / 400 LBS
MAX. OPERATING TEMPERATURE
100 C / 212 F
MAX. PRESSURE
4 BAR / 58 PSI
The wheels conform to safety standard JASO T203-85 for JWL dotE Certification. Before riding on public streets, be sure to check your local regulations.
Rotobox Boost Wheel set Weight example:
Stock S1000RR 11.70kg (25.79 lbs)
Rotobox Boost 6.69kg (14.74 lbs)
Weight saving more than 5.00kg of rotating mass. Incredible!
The new and improved model BOOST carbon fiber wheel from Rotobox, decreasing the weight from the RBX2 with improved design and higher performance! Comes in gloss and matte finish, in both symmetric and convex designs.
Like the RBX2, the BOOST is produced using Rotobox's unique 3-component composite - combining carbon, epoxy and stainless steel. By integrating the stainless 2,5 mm steel wire in each side of the rim, we increase its impact resistance at the most critical outer part. JWL and DOT approved, having met JASO T203-85 safety standards.
Another hidden BOOST gem - the Structural Rib. Thanks to the High Pressure Core Technology the structural rib is placed in the inner side between the spokes, with its mission to support the stress hot spot of the wheel. As a result the BOOST elegant spoke design brings greater stiffness and although the spokes are thinner the BOOST is stronger than ever - with a permissible static load of 280 kg on the rear and 180kg on the front wheel.
ASSEMBLING COMPONENTS
Carbon fiber composite rim, a one-piece hollow carbon cast, reinforced with stainless steel wire and UV protected; 7075 T6 aluminum alloy hubs, spacers and sprocket carrier [only with rear symmetric wheel]. machined from solid and hard anodized; polyurethane cushion drive set; SKF bearings; aluminum valve stem.
PRODUCT QUALITY CONTROL
Your Rotobox wheel has its own Serial Number to track the production history. We confirm to have performed quality verification procedure of your Rotobox wheel.
SIZE
17" x 3.5"
WEIGHT
REAR WHEEL WEIGHT 2.58 kg / 5.68 LBS
MAX. STATIC LOAD
REAR 180 kg / 400 LBS
MAX. OPERATING TEMPERATURE
100 C / 212 F
MAX. PRESSURE
4 BAR / 58 PSI
The wheels conform to safety standard JASO T203-85 for JWL dotE Certification. Before riding on public streets, be sure to check your local regulations.
Rotobox Boost Wheel set Weight example:
Stock S1000RR 11.70kg (25.79 lbs)
Rotobox Boost 6.69kg (14.74 lbs)
Weight saving more than 5.00kg of rotating mass. Incredible!
Item #: FA70350332
Condition:
New
Custom Product: Rotobox Products are made to order with an estimated completion time of 10-12 weeks from order placed. Delivery time is longer since we
have entered into a new industrial partnership with MV Agusta motorcycle manufacturer for the supply of wheels for original equipment on the new MV Agusta
Brutale 1000RR Assen! Although we have expanded our production capacity, we are also forced to extending the delivery time for the new orders.
Please feel free to contact us for any questions.
Free Ground Shipping
Price: $1,812.00
Description:
Rotobox BOOST Symmetric Rear Wheel
The new and improved model BOOST carbon fiber wheel from Rotobox, decreasing the weight from the RBX2 with improved design and higher performance! Comes in gloss and matte finish, in both symmetric and convex designs.
Like the RBX2, the BOOST is produced using Rotobox's unique 3-component composite - combining carbon, epoxy and stainless steel. By integrating the stainless 2,5 mm steel wire in each side of the rim, we increase its impact resistance at the most critical outer part. JWL and DOT approved, having met JASO T203-85 safety standards.
Another hidden BOOST gem - the Structural Rib. Thanks to the High Pressure Core Technology the structural rib is placed in the inner side between the spokes, with its mission to support the stress hot spot of the wheel. As a result the BOOST elegant spoke design brings greater stiffness and although the spokes are thinner the BOOST is stronger than ever - with a permissible static load of 280 kg on the rear and 180kg on the front wheel.
ASSEMBLING COMPONENTS
Carbon fiber composite rim, a one-piece hollow carbon cast, reinforced with stainless steel wire and UV protected; 7075 T6 aluminum alloy hubs, spacers and sprocket carrier [only with rear symmetric wheel]. machined from solid and hard anodized; polyurethane cushion drive set; SKF bearings; aluminum valve stem.
PRODUCT QUALITY CONTROL
Your Rotobox wheel has its own Serial Number to track the production history. We confirm to have performed quality verification procedure of your Rotobox wheel.
SIZE
17" x 6.00"
WEIGHT
REAR WHEEL WEIGHT 4.11 kg / 9.06 LBS
MAX. STATIC LOAD
REAR 280 kg / 617 LBS
MAX. OPERATING TEMPERATURE
100 C / 212 F
MAX. PRESSURE
4 BAR / 58 PSI
The wheels conform to safety standard JASO T203-85 for JWL dotE Certification. Before riding on public streets, be sure to check your local regulations.
Rotobox Boost Wheel set Weight example:
Stock S1000RR 11.70kg (25.79 lbs)
Rotobox Boost 6.69kg (14.74 lbs)
Weight saving more than 5.00kg of rotating mass. Incredible!
The new and improved model BOOST carbon fiber wheel from Rotobox, decreasing the weight from the RBX2 with improved design and higher performance! Comes in gloss and matte finish, in both symmetric and convex designs.
Like the RBX2, the BOOST is produced using Rotobox's unique 3-component composite - combining carbon, epoxy and stainless steel. By integrating the stainless 2,5 mm steel wire in each side of the rim, we increase its impact resistance at the most critical outer part. JWL and DOT approved, having met JASO T203-85 safety standards.
Another hidden BOOST gem - the Structural Rib. Thanks to the High Pressure Core Technology the structural rib is placed in the inner side between the spokes, with its mission to support the stress hot spot of the wheel. As a result the BOOST elegant spoke design brings greater stiffness and although the spokes are thinner the BOOST is stronger than ever - with a permissible static load of 280 kg on the rear and 180kg on the front wheel.
ASSEMBLING COMPONENTS
Carbon fiber composite rim, a one-piece hollow carbon cast, reinforced with stainless steel wire and UV protected; 7075 T6 aluminum alloy hubs, spacers and sprocket carrier [only with rear symmetric wheel]. machined from solid and hard anodized; polyurethane cushion drive set; SKF bearings; aluminum valve stem.
PRODUCT QUALITY CONTROL
Your Rotobox wheel has its own Serial Number to track the production history. We confirm to have performed quality verification procedure of your Rotobox wheel.
SIZE
17" x 6.00"
WEIGHT
REAR WHEEL WEIGHT 4.11 kg / 9.06 LBS
MAX. STATIC LOAD
REAR 280 kg / 617 LBS
MAX. OPERATING TEMPERATURE
100 C / 212 F
MAX. PRESSURE
4 BAR / 58 PSI
The wheels conform to safety standard JASO T203-85 for JWL dotE Certification. Before riding on public streets, be sure to check your local regulations.
Rotobox Boost Wheel set Weight example:
Stock S1000RR 11.70kg (25.79 lbs)
Rotobox Boost 6.69kg (14.74 lbs)
Weight saving more than 5.00kg of rotating mass. Incredible!
Item #: RA70600711
Condition:
New
Custom Product: Rotobox Products are made to order with an estimated completion time of 10-12 weeks from order placed. Delivery time is longer since we
have entered into a new industrial partnership with MV Agusta motorcycle manufacturer for the supply of wheels for original equipment on the new MV Agusta
Brutale 1000RR Assen! Although we have expanded our production capacity, we are also forced to extending the delivery time for the new orders.
Please feel free to contact us for any questions.
Free Ground Shipping
Price: $2,410.00
Description:
Rotobox BOOST Symmetric Rear Wheel For 2021 ZX10RR ONLY Does not fit 2021 ZX10R
The new and improved model BOOST carbon fiber wheel from Rotobox, decreasing the weight from the RBX2 with improved design and higher performance! Comes in gloss and matte finish, in both symmetric and convex designs.
Like the RBX2, the BOOST is produced using Rotobox's unique 3-component composite - combining carbon, epoxy and stainless steel. By integrating the stainless 2,5 mm steel wire in each side of the rim, we increase its impact resistance at the most critical outer part. JWL and DOT approved, having met JASO T203-85 safety standards.
Another hidden BOOST gem - the Structural Rib. Thanks to the High Pressure Core Technology the structural rib is placed in the inner side between the spokes, with its mission to support the stress hot spot of the wheel. As a result the BOOST elegant spoke design brings greater stiffness and although the spokes are thinner the BOOST is stronger than ever - with a permissible static load of 280 kg on the rear and 180kg on the front wheel.
ASSEMBLING COMPONENTS
Carbon fiber composite rim, a one-piece hollow carbon cast, reinforced with stainless steel wire and UV protected; 7075 T6 aluminum alloy hubs, spacers and sprocket carrier [only with rear symmetric wheel]. machined from solid and hard anodized; polyurethane cushion drive set; SKF bearings; aluminum valve stem.
PRODUCT QUALITY CONTROL
Your Rotobox wheel has its own Serial Number to track the production history. We confirm to have performed quality verification procedure of your Rotobox wheel.
SIZE
17" x 6.00"
WEIGHT
REAR WHEEL WEIGHT 4.11 kg / 9.06 LBS
MAX. STATIC LOAD
REAR 280 kg / 617 LBS
MAX. OPERATING TEMPERATURE
100 C / 212 F
MAX. PRESSURE
4 BAR / 58 PSI
The wheels conform to safety standard JASO T203-85 for JWL dotE Certification. Before riding on public streets, be sure to check your local regulations.
Rotobox Boost Wheel set Weight example:
Stock S1000RR 11.70kg (25.79 lbs)
Rotobox Boost 6.69kg (14.74 lbs)
Weight saving more than 5.00kg of rotating mass. Incredible!
The new and improved model BOOST carbon fiber wheel from Rotobox, decreasing the weight from the RBX2 with improved design and higher performance! Comes in gloss and matte finish, in both symmetric and convex designs.
Like the RBX2, the BOOST is produced using Rotobox's unique 3-component composite - combining carbon, epoxy and stainless steel. By integrating the stainless 2,5 mm steel wire in each side of the rim, we increase its impact resistance at the most critical outer part. JWL and DOT approved, having met JASO T203-85 safety standards.
Another hidden BOOST gem - the Structural Rib. Thanks to the High Pressure Core Technology the structural rib is placed in the inner side between the spokes, with its mission to support the stress hot spot of the wheel. As a result the BOOST elegant spoke design brings greater stiffness and although the spokes are thinner the BOOST is stronger than ever - with a permissible static load of 280 kg on the rear and 180kg on the front wheel.
ASSEMBLING COMPONENTS
Carbon fiber composite rim, a one-piece hollow carbon cast, reinforced with stainless steel wire and UV protected; 7075 T6 aluminum alloy hubs, spacers and sprocket carrier [only with rear symmetric wheel]. machined from solid and hard anodized; polyurethane cushion drive set; SKF bearings; aluminum valve stem.
PRODUCT QUALITY CONTROL
Your Rotobox wheel has its own Serial Number to track the production history. We confirm to have performed quality verification procedure of your Rotobox wheel.
SIZE
17" x 6.00"
WEIGHT
REAR WHEEL WEIGHT 4.11 kg / 9.06 LBS
MAX. STATIC LOAD
REAR 280 kg / 617 LBS
MAX. OPERATING TEMPERATURE
100 C / 212 F
MAX. PRESSURE
4 BAR / 58 PSI
The wheels conform to safety standard JASO T203-85 for JWL dotE Certification. Before riding on public streets, be sure to check your local regulations.
Rotobox Boost Wheel set Weight example:
Stock S1000RR 11.70kg (25.79 lbs)
Rotobox Boost 6.69kg (14.74 lbs)
Weight saving more than 5.00kg of rotating mass. Incredible!
Item #: RA70600787
Condition:
New
Custom Product: Rotobox Products are made to order with an estimated completion time of 10-12 weeks from order placed. Delivery time is longer since we
have entered into a new industrial partnership with MV Agusta motorcycle manufacturer for the supply of wheels for original equipment on the new MV Agusta
Brutale 1000RR Assen! Although we have expanded our production capacity, we are also forced to extending the delivery time for the new orders.
Please feel free to contact us for any questions.
Free Ground Shipping
Price: $2,410.00
Description:
Öhlins FGRT Upside Down Front Fork Road & Track FGRT 237
It doesn’t matter if you are heading for a National Roadracing title or if you are taking your bike on a run on
your favourite road. The new Road & Track front fork will give you loads of performance, stable damping and fantastic comfort. The new Road & Track front fork features the Öhlins 30 mm Cartridge Kit inside, a winning kit in several national superbike championships.
Compression and rebound adjustments are easily done with compression adjustment in one leg and rebound
adjustment in the other leg. The new front fork gives a big improvement in tire feel, brake support and the general handling of the bike. The outer design has been redesigned to make this front fork even more attractive.
Part number
FGRT 237
Type Code
Front Fork R&T
Technical data
| Length: | 740 mm |
|---|---|
| Stroke: | 120 mm |
| Rate N/mm: | 10,5 N/mm |
| Position: | front |
| Mounted spring: | 04744-05 |
| Spring series: | 04744-Serie |
| Oil level mm: | 150 mm |
Fits for vehicles
Kawasaki Ninja ZX-10R (2021)
- "ABE" in preparation (Germany)
Kawasaki Ninja ZX-10RR (2021)
- "ABE" in preparation (Germany)
Download
- Mounting Instruction Öhlins Motorcycle FGRT 231 (English) (486,1 KB)
- Owner´s Manual Öhlins Motorcycle Front Fork FGRT Series Road Track (English) (1.895,5 KB)
- Mounting Instruction Öhlins Motorcycle FGRT 231 (German) (510,0 KB)
- Owner´s Manual Öhlins Motorcycle Front Fork FGRT Series Road Track (German) (1.352,0 KB)
Item #: FGRT 237
Condition:
New
On-hand inventory ships within 24 hours. Please note supply-chain related delays are possible. Please contact us for ETA
Price: $2,699.00
VD-9031XX
Description:
=9031XX Will Fit OEM and most Brembo Calipers, Please Verify before ordering=
***Equivalent Brembo Racing Z04 Brake Pad : P/N: M497Z04***
*Sold per caliper
BREMBO CALIPERS:
Radial M4 100mm MonoBloc Caliper : P4 34
Brembo P/N: 220988530 / 220988531
Radial M4 108mm MonoBloc Caliper : P4 34
Brembo P/N: 220A39710 / 220A39711
Radial GP4 RC CNC Caliper
Brembo P/N: 220B01010 / 220B01011
for Brembo M4 M50 GP4RS GP4RX and .484 Cafe Calipers
Vesrah XX pads are the top of the line pad. MADE FOR RACING. They offer slightly less bite than the older RJL compound but greater braking power with a progressive feel. Small increases in lever force translate to exceptional increases in braking power. True one-finger braking with excellent feel and no fade. Your brakes will have the same feel and response from the first corner to the last.
***Equivalent Brembo Racing Z04 Brake Pad : P/N: M497Z04***
*Sold per caliper
BREMBO CALIPERS:
Radial M4 100mm MonoBloc Caliper : P4 34
Brembo P/N: 220988530 / 220988531
Radial M4 108mm MonoBloc Caliper : P4 34
Brembo P/N: 220A39710 / 220A39711
Radial GP4 RC CNC Caliper
Brembo P/N: 220B01010 / 220B01011
for Brembo M4 M50 GP4RS GP4RX and .484 Cafe Calipers
Vesrah XX pads are the top of the line pad. MADE FOR RACING. They offer slightly less bite than the older RJL compound but greater braking power with a progressive feel. Small increases in lever force translate to exceptional increases in braking power. True one-finger braking with excellent feel and no fade. Your brakes will have the same feel and response from the first corner to the last.
Item #: VD-9031XX
Condition:
New
Limited Supply: Only 2 Left!
On-hand inventory ships within 24 hours. When out of stock Please expect a 3 week ETA from manufacturer. Please note supply-chain related delays are possible.
Price: $117.60
ZX10R fuel tank cover
Description:
Carbonin Carbon Fiber Fuel Tank Extension 2011-2020 Kawasaki ZX10R
*Carbon Weave will match all other Carbonin products carbon including the Carbonin Airbox Cover W/ Side Panels.
*Made to fit over OEM Tank and perefect fitment with Carbonin Airbox cover
*Created for better braking ergonomics and mid turn handling.
*Keeps you from Sliding forward and also give something for your leg to hold onto in mid corner.
*New design with thicker carbon weave that is lighter and stronger.
*7oz Total weight
*3M Vinyl Tape Included for Installation
*Carbon Weave will match all other Carbonin products carbon including the Carbonin Airbox Cover W/ Side Panels.
*Made to fit over OEM Tank and perefect fitment with Carbonin Airbox cover
*Created for better braking ergonomics and mid turn handling.
*Keeps you from Sliding forward and also give something for your leg to hold onto in mid corner.
*New design with thicker carbon weave that is lighter and stronger.
*7oz Total weight
*3M Vinyl Tape Included for Installation
Item #: CK18405
Condition:
New
In Stock inventory ships within 24 hours. Avio Fiber has a typical eta of 4-6 weeks, Carbon Fiber can take up to 8 weeks due to production times. Please
note supply-chain related delays are possible.
Price: $393.74
4sr diablo AR
Description:
"WE MAKE OUR PRODUCTION SUITS IN THE SAME WAY WE PREPARE OUR FACTORY RACERS SUITS"
Are you looking for a top-class racing suit to accommodate your standalone airbag vest? Then you’ve just found the best Airbag Ready® leathers on the market. Our latest specification Monster Green AR 1PC race suit comes with all the unique safety points you would expect from 4SR, but with our increased area of accordion stretch panel, this suit can now work safely in conjunction with any standalone airbag vest for racing.
Over the years we have been working with professional racers to develop the safest suits possible, this is our safest and most comfortable yet. Racing Diablo AR suit already comes with 18 ergonomically placed protectors and if you remove the 4SR Level 2 back and chest protectors, you can then wear your chosen airbag vest underneath. Easy and fast, you're now Airbag Ready!
Thanks to the unique cut and placement of accordion stretch panels, you can use several variants of standalone airbags available on the market. Our stitching and materials remain and will always remain 100% the same as our factory racers suits.
If you want to improve your motorcycle suit, leather jacket or trousers with leather logos, 4SR badging service is here for you!
The price includes knee and elbow sliders, internal protectors, removable chest and back protectors, double hip and coccyx protection and all from reputable brands. We have 18 ergonomically placed protectors, the most used in any mass-produced 1pc leather suit.
"WE MAKE OUR PRODUCTION SUITS IN THE SAME WAY WE PREPARE OUR FACTORY RACERS SUITS"
We have also developed a simple and effective solution for holding up your leathers between track sessions, 4SR's Zipper Lock system will effectively hold the upper half of your suit out of the way.
The one-piece Racing Diablo AR Airbag Ready is also equipped with:
- Hollow hump to fit your Hydroback
- Seamless stretch in the crotch and armpit area for increased movement
- Flexible, comfortable material used on the sleeve cuffs
- Zipper lock to hold your leathers in between track sessions
- Elbow down TECH elbow sliders. Available in several colours - White, Black, Red, Fluorescent Red, Fluorescent Yellow and Green.
Standard equipment of the Racing Diablo AR Airbag Ready® includes:
- 1,2 mm thick cowhide / black, red, anthracite grey /
- 4SR Elbow down TECH - replaceable elbow sliders
- offset shoulders and pre-curved sleeves for the perfect riding position
- high specification Betac shoulder, elbows and knees, certificated in accordance with EN
- YKK & OPTI Zippers
- maximum perforation on chest area, local perforation on arms, hips and thighs
- 3D mesh lining
- Aramid stretch panels for maximum mobility
- flexible leather panels
- hollow aerodynamic hump to fit 4SR Hydrobag
- use of tripple seams & patented, double 4SR seam at more stressed points
- soft strech sleeve cuffs
- comfortable collar
- reflective logo on collar
- includes chest and back protectors (Both must be removed if using an Airbag system)
- includes knee sliders
- excludes Airbag system
- AR suit is compatible with In&motion airbag systems, Alpinestars Tech-Air®
- AR Airbag Ready® is a trademark registered in the Industrial Property Office of the Czech Republic
What does 4SR have and others don't?:
- The suit is fully equipped with racing protectors, including chest and back protectors
- Aramid stretch panel under the armpits and crotch is seamless
- Inside the suit you will find a hidden pocket for a LapTimer
- After closing the patent on the slider of the main zipper, the unzipped suit will not fall passed the butt
- Areas prone to abrasion are connected by a patented, double 4SR seam, which is sewn 4x!
- 4SR suits have two layers of leather on the elbows, shoulders, hips and seating area
- 4SR leather was tested by the TÜV Rheinland® certification center according to the EN 13595-2: 2002 standard, where it withstood 11.2s in the abrasion resistance test. We received the Level 2 safety label for our leather.
Item #: 110111248
Condition:
New
Only size 56 and 58 US in stock
Ships within 24-48 hours and ships directly from our supplier. We will contact you if there is any delay or availability issues.
Price: $1,299.00
Sale: $1,050.00
Save: 19%
Save: $249.00
4SR Air Bag Ready Suit
Description:
Are you looking for a top-class racing suit to accommodate your standalone airbag vest? Then you’ve just found the best Airbag Ready® leathers on the market.
"WE MAKE OUR PRODUCTION SUITS IN THE SAME WAY WE PREPARE OUR FACTORY RACERS SUITS"
Our latest specification AR Monster Green 1PC race suit comes with all the unique safety points you would expect from 4SR, but with our increased area of accordion stretch panel, this suit can now work safely in conjunction with any standalone airbag vest for racing.
Over the years we have been working with professional racers to develop the safest suits possible, this is our safest and most comfortable yet. Racing Monster Green AR suit already comes with 18 ergonomically placed protectors and if you remove the 4SR Level 2 back and chest protectors, you can then wear your chosen airbag vest underneath. Easy and fast, you're now Airbag Ready!
Thanks to the unique cut and placement of accordion stretch panels, you can use several variants of standalone airbags available on the market. Our stitching and materials remain and will always remain 100% the same as our factory racers suits.
The price includes knee and elbow sliders, internal protectors, removable chest and back protectors, double hip and coccyx protection and all from reputable brands. We have 18 ergonomically placed protectors, the most used in any mass-produced 1pc leather suit.
"WE MAKE OUR PRODUCTION SUITS IN THE SAME WAY WE PREPARE OUR FACTORY RACERS SUITS"
We have also developed a simple and effective solution for holding up your leathers between track sessions, 4SR's Zipper Lock system will effectively hold the upper half of your suit out of the way.
The one-piece Racing AR Monster Green Airbag Ready is also equipped with:
- Hollow hump to fit your Camelbak rehydration pack
- Seamless stretch in the crotch and armpit area for increased movement
- Flexible, comfortable material used on the sleeve cuffs
- Zipper lock to hold your leathers in between track sessions
-
Elbow down TECH elbow sliders. Available in several colours - Black, Red, Fluorescent Red, Fluorescent Yellow and Green.
Standard equipment of the Racing Monster Green AR Airbag Ready® includes:
- 1,2 mm thick cowhide / black, Fluorescent Yellow, Fluorescent Red /
- 4SR Elbow down TECH - replaceable elbow sliders
- Offset Shoulders and Pre-Curved Sleeves for the Perfect Riding Position
- High Specification Betac Shoulder, Elbow and Knee Pads (Certified according to EN 1621-1: 2012)
- YKK & OPTI Zippers
- Maximum Perforation on chest area, local perforation on arms, hips and thighs
- complete front perforation & local perforations underarm
- 3D mesh lining
- Kevlar stretch panels for maximum mobility
- flexible leather panels
- hollow aerodynamic hump to fit camelbak
- use of double seams at more stressed points
- soft kevlar sleeve cuffs
- comfortable collar
- reflective logo on collar
- includes chest and spine protectors (Both must be removed if using an Airbag system)
- includes knee sliders
- excluding Airbag system
- AR suit is compatible with In & motion airbag system, Alpinestars Tech-Air®,
- AR Airbag Ready® is a trademark registered in the Industrial Property Office of the Czech Republic
Item #: 11011658
Condition:
New
Only size 48 52, 54, 56 In Stock at this price
Ships within 24-48 hours and ships directly from our supplier. We will contact you if there is any delay or availability issues.
Price: $1,299.00
Sale: $1,050.00
Save: 19%
Save: $249.00
ZX10R
Description:
Replacement right side Fairing For Carbonin complete fairing, will not fit with other brands or OEM
Item #: K22232AF
Condition:
New
In Stock inventory ships within 24 hours. Avio Fiber has a typical eta of 4-6 weeks, Carbon Fiber can take up to 8 weeks due to production times. Please
note supply-chain related delays are possible.
Price: $289.56
zx10r front wing
Description:
Replacement right side Fairing Cover For Carbonin complete fairing, will not fit with other brands
This is the portion that makes the wing and attaches to the carbonin upper and side panel
This is the portion that makes the wing and attaches to the carbonin upper and side panel
Item #: K22237AF
Condition:
New
In Stock inventory ships within 24 hours. Avio Fiber has a typical eta of 4-6 weeks, Carbon Fiber can take up to 8 weeks due to production times. Please
note supply-chain related delays are possible.
Price: $93.85
zx10rAvio fiber replacement race upper
Description:
Replacement Upper Fairing For Carbonin complete fairing, will not fit with other brands or with oem bodywork
Item #: K22210AF
Condition:
New
In Stock inventory ships within 24 hours. Avio Fiber has a typical eta of 4-6 weeks, Carbon Fiber can take up to 8 weeks due to production times. Please
note supply-chain related delays are possible.
Price: $374.90
ZX10r Replacement side panel
Description:
Replacement left side Fairing For Carbonin complete fairing, will not fit with other brands
Item #: CK22231
Condition:
New
In Stock inventory ships within 24 hours. Avio Fiber has a typical eta of 4-6 weeks, Carbon Fiber can take up to 8 weeks due to production times. Please
note supply-chain related delays are possible.
Price: $433.07
zx10r front wing
Description:
Replacement left side Fairing Cover For Carbonin complete fairing, will not fit with other brands
This is the portion that makes the wing and attaches to the carbonin upper and side panel
This is the portion that makes the wing and attaches to the carbonin upper and side panel
Item #: CK22236
Condition:
New
In Stock inventory ships within 24 hours. Avio Fiber has a typical eta of 4-6 weeks, Carbon Fiber can take up to 8 weeks due to production times. Please
note supply-chain related delays are possible.
Price: $134.11
ZX10r Replacement Carbon race lower
Description:
Replacement lower race Fairing For Carbonin complete fairing, will not fit with other brands
This will work with Kickstand
This will work with Kickstand
Item #: CK22220
Condition:
New
In Stock inventory ships within 24 hours. Avio Fiber has a typical eta of 4-6 weeks, Carbon Fiber can take up to 8 weeks due to production times. Please
note supply-chain related delays are possible.
Price: $331.09
Description:
Replacement right side Fairing For Carbonin complete fairing, will not fit with other brands
Item #: CK22232
Condition:
New
In Stock inventory ships within 24 hours. Avio Fiber has a typical eta of 4-6 weeks, Carbon Fiber can take up to 8 weeks due to production times. Please
note supply-chain related delays are possible.
Price: $433.07
zx10r front wing
Description:
Replacement right side Fairing Cover For Carbonin complete fairing, will not fit with other brands
This is the portion that makes the wing and attaches to the carbonin upper and side panel
This is the portion that makes the wing and attaches to the carbonin upper and side panel
Item #: CK22237
Condition:
New
In Stock inventory ships within 24 hours. Avio Fiber has a typical eta of 4-6 weeks, Carbon Fiber can take up to 8 weeks due to production times. Please
note supply-chain related delays are possible.
Price: $134.11
zx10r carbon fiber replacement race upper
Description:
Replacement Upper Fairing For Carbonin complete fairing, will not fit with other brands
Item #: CK22210
Condition:
New
In Stock inventory ships within 24 hours. Avio Fiber has a typical eta of 4-6 weeks, Carbon Fiber can take up to 8 weeks due to production times. Please
note supply-chain related delays are possible.
Price: $599.31
ZX10R
Description:
Replacement Left side Fairing For Carbonin complete fairing, will not fit with other brands or OEM
Item #: K22231AF
Condition:
New
In Stock inventory ships within 24 hours. Avio Fiber has a typical eta of 4-6 weeks, Carbon Fiber can take up to 8 weeks due to production times. Please
note supply-chain related delays are possible.
Price: $289.56
ZX10r Replacement Carbon race lower
Description:
Replacement lower race Fairing For Carbonin complete fairing, will not fit with other brands or oem fairing
This will work with Kickstand
This will work with Kickstand
Item #: K22220AF
Condition:
New
In Stock inventory ships within 24 hours. Avio Fiber has a typical eta of 4-6 weeks, Carbon Fiber can take up to 8 weeks due to production times. Please
note supply-chain related delays are possible.
Price: $208.53
Description:
Lightweight Carbon fender Oem Replacement
Item #: CK18010
Condition:
New
In Stock inventory ships within 24 hours. Avio Fiber has a typical eta of 4-6 weeks, Carbon Fiber can take up to 8 weeks due to production times. Please
note supply-chain related delays are possible.
Price: $236.03
Description:
Welcome to the latest development in superbike suspension, introducing the high side saving OVERSUSPENSION from Supreme Technology based in Italy. As seen on the WSBK Barni Racing Ducati V4!
This new patented device is called "Oversuspension" - OverSuspension is a special resonator capable of removing the resonances of the rear swingarm group and giving the vehicle more stability, traction, braking and comfort, as well as facilitating the dynamic operation of the suspension, and greatly improving driving safety in every condition, for example reducing the possibility of highside on the track by up to 90%.
This new patented device is called "Oversuspension" - OverSuspension is a special resonator capable of removing the resonances of the rear swingarm group and giving the vehicle more stability, traction, braking and comfort, as well as facilitating the dynamic operation of the suspension, and greatly improving driving safety in every condition, for example reducing the possibility of highside on the track by up to 90%.
Item #: OVS-STB/KawZX10R
Condition:
New
On-hand inventory ships within 24 hours. When out of stock Please expect a 3 week ETA from manufacturer. Please note supply-chain related delays are possible.
Price: $429.95
Description:
Alpha Racing Brake reservoir kit for Brembo 19RCS 3272A016A00
Brake reservoir kit for Brembo radial master cylinder 19RCS, reservoir with hose and bracket
weight: 0,10 kg
Brake reservoir kit for Brembo radial master cylinder 19RCS, reservoir with hose and bracket
weight: 0,10 kg
Item #: 3272A016A00
Condition:
New
Limited Supply: Only 1 Left!
On-hand inventory ships within 24 hours. We place weekly orders with Alpha, If we are out of stock on an item we can have it within 2 to 3 weeks
Order now to insure you are allocated from the next shipment. Please note supply-chain related delays are possible.
Price: $66.24
Description:
Armour Bodies Kawasaki ZX10R 2021-22 Superbike Seat Base Pad 71-0171PAD
Item #: 71-0171PAD
Condition:
New
Price: $50.00
ADLZX
Description:
Bonamici Racing Aluminium Adaptor For Kawasaki ZX-10R 2011-2023 ADLZX If you have both the clutch and brake guards you will need two
Item #: ADLZX
Condition:
New
On-hand inventory ships within 24 hours: When out of stock delivery times can vary from 2 to 6 weeks Please note supply-chain related delays are possible.
Price: $34.07
Description:
Bonamici Racing Aluminium Brake Lever Aprilia RSV4, Factory, APRC, Tuono 1100, RS 660, Tuono 660 - Honda CBR 1000 RR-R Fireblade SP - Kawasaki ZX-10R (2016/2020) - KTM 1290 Superduke 2020/> - Triumph Daytona 675 675 R (2011/2016), Speed Triple 1050 (2011/2017) LB110
Item #: LB110
Condition:
New
On-hand inventory ships within 24 hours: When out of stock delivery times can vary from 2 to 6 weeks Please note supply-chain related delays are possible.
Price: $160.44
Item #: RALB110R
Condition:
New
On-hand inventory ships within 24 hours: When out of stock delivery times can vary from 2 to 6 weeks Please note supply-chain related delays are
possible.
Price: $395.60
Description:
Bonamici Racing Aluminium Dashboard Protection Kawasaki ZX-4R/RR/ZX-10R 2021 - 2023
Worried about potential damage happening to your beautiful ZX-10R instrument cluster? Look no further as Bonamici has released this specifically designed for the latest Kawasaki ZX-10R to help protect your dash from anything unwanted touching the expensive TFT screen, leading to potential damage. Manufactured from Billet Aluminium which is suitable for absorbing shocks while featuring a plexi-glass protective panel which is treated to an anti-fog finish to ensure your dashboard is visible in all conditions.
Worried about potential damage happening to your beautiful ZX-10R instrument cluster? Look no further as Bonamici has released this specifically designed for the latest Kawasaki ZX-10R to help protect your dash from anything unwanted touching the expensive TFT screen, leading to potential damage. Manufactured from Billet Aluminium which is suitable for absorbing shocks while featuring a plexi-glass protective panel which is treated to an anti-fog finish to ensure your dashboard is visible in all conditions.
Item #: DCP20
Condition:
New
On-hand inventory ships within 24 hours: When out of stock delivery times can vary from 2 to 6 weeks Please note supply-chain related delays are possible.
Price: $230.72
Description:
Bonamici Racing Aluminium Rearsets Kawasaki ZX-10R 2021 - 2023 K021
Bonamici Rearsets are made from a single piece of billet aluminium in their factory based in Italy, with a black anodised finish for corrosion resistance and durability. These Rearsets are incredibly high quality. To ensure the rearsets are a perfect fit, Bonamici laser scan each and every bike they manufacture parts for in order to ensure fitment and compatibility, after this their parts are fine tuned, tested and validated through various levels of Motorsport. Featuring multiple mounting points, these Rearsets allow you to precisely mount the footpegs in the most comfortable position for the rider. This helps to improve the handling, comfort and appearance of your bike as you can set the Rearsets up to match your particular riding style.
Bonamici Rearsets are made from a single piece of billet aluminium in their factory based in Italy, with a black anodised finish for corrosion resistance and durability. These Rearsets are incredibly high quality. To ensure the rearsets are a perfect fit, Bonamici laser scan each and every bike they manufacture parts for in order to ensure fitment and compatibility, after this their parts are fine tuned, tested and validated through various levels of Motorsport. Featuring multiple mounting points, these Rearsets allow you to precisely mount the footpegs in the most comfortable position for the rider. This helps to improve the handling, comfort and appearance of your bike as you can set the Rearsets up to match your particular riding style.
Item #: K021
Condition:
New
On-hand inventory ships within 24 hours: When out of stock delivery times can vary from 2 to 6 weeks Please note supply-chain related delays are possible.
Price: $697.80
ZX10r top triple clamp
Description:
Aluminium TOP TRIPLE CLAMP KawasakiZX-10R “Street” 2016/> PSK1
Item #: PSK1
Condition:
New
On-hand inventory ships within 24 hours: When out of stock delivery times can vary from 2 to 6 weeks
Please note supply-chain related delays are possible.
Price: $416.48
Description:
Bonamici Racing Aluminum chain adjuster Kawasaki ZX-10R 16-23 CHAD02_BK
Bonamici Racing is an Italian manufacturer of CNC machined performance parts such as rearsets, engine covers, chain adjusters, triple clamps, dashboard covers, clip-ons, levers, chain protectors, etc. Bonamici Racing is supplier to numerous teams in e.g. the World Superbikes (WSBK) and Endurance World Campionship (EWC). Everything is made in Italy.
Bonamici Racing is an Italian manufacturer of CNC machined performance parts such as rearsets, engine covers, chain adjusters, triple clamps, dashboard covers, clip-ons, levers, chain protectors, etc. Bonamici Racing is supplier to numerous teams in e.g. the World Superbikes (WSBK) and Endurance World Campionship (EWC). Everything is made in Italy.
Item #: CHAD02_BK
Condition:
New
On-hand inventory ships within 24 hours: When out of stock delivery times can vary from 2 to 6 weeks Please note supply-chain related delays are possible.
Price: $273.63
Description:
Bonamici Racing Engine Protection Full Kit For Kawasaki ZX-10R 2011 - 2023 CP012
From the cooperation with racing teams from the Superbike World Championship, the aluminium engine cover protectors from Bonamici Racing were born. Manufactured from high quality billet aluminium and milled using the latest CNC technology, the anodised protector kits perfectly protect the bike’s engine housing in the event of a crash. The lightweight aluminium protectors are simply screwed onto the original engine housing and guarantee a perfect fit.
No gluing necessary!
Top quality Made in Italy
From the cooperation with racing teams from the Superbike World Championship, the aluminium engine cover protectors from Bonamici Racing were born. Manufactured from high quality billet aluminium and milled using the latest CNC technology, the anodised protector kits perfectly protect the bike’s engine housing in the event of a crash. The lightweight aluminium protectors are simply screwed onto the original engine housing and guarantee a perfect fit.
No gluing necessary!
Top quality Made in Italy
Item #: CP012
Condition:
New
On-hand inventory ships within 24 hours: When out of stock delivery times can vary from 2 to 6 weeks
Please note supply-chain related delays are possible.
Price: $285.71
Description:
Bonamici Racing Engine Protection Left Side For Kawasaki ZX-10R 2011 - 2023 CP011
From the cooperation with racing teams from the Superbike World Championship, the aluminium engine cover protectors from Bonamici Racing were born. Manufactured from high quality billet aluminium and milled using the latest CNC technology, the anodised protector kits perfectly protect the bike’s engine housing in the event of a crash. The lightweight aluminium protectors are simply screwed onto the original engine housing and guarantee a perfect fit.
No gluing necessary!
Top quality Made in Italy
From the cooperation with racing teams from the Superbike World Championship, the aluminium engine cover protectors from Bonamici Racing were born. Manufactured from high quality billet aluminium and milled using the latest CNC technology, the anodised protector kits perfectly protect the bike’s engine housing in the event of a crash. The lightweight aluminium protectors are simply screwed onto the original engine housing and guarantee a perfect fit.
No gluing necessary!
Top quality Made in Italy
Item #: CP011
Condition:
New
On-hand inventory ships within 24 hours: When out of stock delivery times can vary from 2 to 6 weeks Please note supply-chain related delays are possible.
Price: $129.67
Description:
Bonamici Racing Engine Protection Right Side For Kawasaki ZX-10R 2011 - 2023 CP010
From the cooperation with racing teams from the Superbike World Championship, the aluminium engine cover protectors from Bonamici Racing were born. Manufactured from high quality billet aluminium and milled using the latest CNC technology, the anodised protector kits perfectly protect the bike’s engine housing in the event of a crash. The lightweight aluminium protectors are simply screwed onto the original engine housing and guarantee a perfect fit.
No gluing necessary!
Top quality Made in Italy
From the cooperation with racing teams from the Superbike World Championship, the aluminium engine cover protectors from Bonamici Racing were born. Manufactured from high quality billet aluminium and milled using the latest CNC technology, the anodised protector kits perfectly protect the bike’s engine housing in the event of a crash. The lightweight aluminium protectors are simply screwed onto the original engine housing and guarantee a perfect fit.
No gluing necessary!
Top quality Made in Italy
Item #: CP010
Condition:
New
On-hand inventory ships within 24 hours: When out of stock delivery times can vary from 2 to 6 weeks Please note supply-chain related delays are possible.
Price: $157.14
Description:
Listing is for 2 pad, which is 1 caliper worth
Z04 dedicated racing compound
Pads are 7.9 mm thick total
Replacement from part number 107A48649
*for Brembo M4 M50 GP4RS GP4RX and .484 Cafe Calipers
Z04 dedicated racing compound
Pads are 7.9 mm thick total
Replacement from part number 107A48649
*for Brembo M4 M50 GP4RS GP4RX and .484 Cafe Calipers
Item #: 107A48639
Condition:
New
Ships within 24-48 hours. Please note supply-chain related delays are possible. We will contact you with an ETA once your order has been processed
Price: $139.00
Brembo 108mm
Description:
Set includes left and right calipers
BRAKE PADS ARE INCLUDED
Built from a single billet piece of aluminum and through careful machining, the Brembo GP4-RB brake calipers are a really important upgrade to the production system.
The improvement in terms of performance and safety is guaranteed as well as its characteristics in terms of power, lightness and modularity are guaranteed.
The body is entirely in aluminum alloy with 22.5 mm offset and 108 mm mounting size.
The braking mechanism is entrusted to 4 totally aluminum 30/34 mm pistons.
The aesthetics are no less with the completely black body and the Brembo logo in glossy red.
TECHNICAL FEATURES:
- Wheelbase: 108 mm
- Offset: 22,5 mm
- Piston diameter: 30 mm
- No. of pistons: 4
- Pistons material: Aluminum
- H brake band: 34 mm
- Finish: Black oxidation
BRAKE PADS ARE INCLUDED
Built from a single billet piece of aluminum and through careful machining, the Brembo GP4-RB brake calipers are a really important upgrade to the production system.
The improvement in terms of performance and safety is guaranteed as well as its characteristics in terms of power, lightness and modularity are guaranteed.
The body is entirely in aluminum alloy with 22.5 mm offset and 108 mm mounting size.
The braking mechanism is entrusted to 4 totally aluminum 30/34 mm pistons.
The aesthetics are no less with the completely black body and the Brembo logo in glossy red.
TECHNICAL FEATURES:
- Wheelbase: 108 mm
- Offset: 22,5 mm
- Piston diameter: 30 mm
- No. of pistons: 4
- Pistons material: Aluminum
- H brake band: 34 mm
- Finish: Black oxidation
Item #: 220B47340
Condition:
New
Ships within 24-48 hours. Please note supply-chain related delays are possible. We will contact you with an ETA once your order has been processed
Price: $1,399.00
Description:
DIRECTLY DERIVED FROM MOTOGP AND APPROVED FOR ROAD USE, THE RENEWED BREMBO SOLUTION IS ALREADY AN EMBLEM OF PURE PERFORMANCE AND ABSOLUTE SPORTINESS
RADIAL BRAKE CALIPERS BREMBO RACING
Version: GP4-MS
Piston number: 4 , 30mm
Calipers material: billet aluminum CNC with nickel finish
Calipers body: Monoblock
Piston material: Aluminum
Wheelbase: 108mm
Off set: 30mm
CALIPERS SUPPLIED WITH PADS 07BB3793
RADIAL BRAKE CALIPERS BREMBO RACING
Version: GP4-MS
Piston number: 4 , 30mm
Calipers material: billet aluminum CNC with nickel finish
Calipers body: Monoblock
Piston material: Aluminum
Wheelbase: 108mm
Off set: 30mm
CALIPERS SUPPLIED WITH PADS 07BB3793
Item #: 220D60030
Condition:
New
Ships within 24-48 hours. Please note supply-chain related delays are possible. We will contact you with an ETA once your order has been processed
Price: $2,999.00
Description:
1 piece airbox cover
It comes Ready to install on your Bike with Perfect Fitment
Made from avio fiber with epoxy resin
Reinforced with Carbon fiber
Light Flexible & Durable
Finished in white Gel Coat
Most Commonly used for Race bikes as this removes the need to remove side panels to get to the fuel tank bolts saving valuable time when working on the bike There is a cut out to access the Tank Bolt so it is not necessary to remove the cover
It comes Ready to install on your Bike with Perfect Fitment
Made from avio fiber with epoxy resin
Reinforced with Carbon fiber
Light Flexible & Durable
Finished in white Gel Coat
Most Commonly used for Race bikes as this removes the need to remove side panels to get to the fuel tank bolts saving valuable time when working on the bike There is a cut out to access the Tank Bolt so it is not necessary to remove the cover
Item #: K16425AF
Condition:
New
In Stock inventory ships within 24 hours. Avio Fiber has a typical eta of 4-6 weeks, Carbon Fiber can take up to 8 weeks due to production times. Please
note supply-chain related delays are possible.
Price: $257.37
ZX10R rear wings
Description:
Left Rear Wing for tail unit. It can only be used with carbonin tail section
This is parts of a 5 pcs set
Required parts are Battery tray , Seat support and tail section
This is parts of a 5 pcs set
Required parts are Battery tray , Seat support and tail section
Item #: K22311AF
Condition:
New
Limited Supply: Only 1 Left!
In Stock inventory ships within 24 hours. Avio Fiber has a typical eta of 4-6 weeks, Carbon Fiber can take up to 8 weeks due to production times. Please
note supply-chain related delays are possible.
Price: $152.40
ZX10R, Bodywork, 2020,2022,2023,carbonin ,fairings
Description:
Kit consists of:
Upper (4 Dzus)
Lower
Left side panel (7 Dzus)
Cover left side Panel
Right side panel (7 Dzus)
Cover right side panel
Single race tail unit (includes battery tray, seat support and winglets)
Does not come painted* Photo for kit reference only
Upper (4 Dzus)
Lower
Left side panel (7 Dzus)
Cover left side Panel
Right side panel (7 Dzus)
Cover right side panel
Single race tail unit (includes battery tray, seat support and winglets)
Does not come painted* Photo for kit reference only
Item #: K22200AF
Condition:
New
In Stock inventory ships within 24 hours. Avio Fiber has a typical eta of 4-6 weeks, Carbon Fiber can take up to 8 weeks due to production times. Please
note supply-chain related delays are possible.
Price: $1,400.00
ZX10R rear wings
Description:
Right Rear Wing for tail unit. It can only be used with carbonin tail section
This is parts of a 5 pcs set
Required parts are Battery tray , Seat support and tail section
This is parts of a 5 pcs set
Required parts are Battery tray , Seat support and tail section
Item #: K22312AF
Condition:
New
In Stock inventory ships within 24 hours. Avio Fiber has a typical eta of 4-6 weeks, Carbon Fiber can take up to 8 weeks due to production times. Please
note supply-chain related delays are possible.
Price: $152.40
ZX10R Seat Support
Description:
Seat Support for tail unit. It can only be used with carbonin tail section
This is parts of a 5 pcs set
Required parts are Battery tray , Left and right wings and tail section
This is parts of a 5 pcs set
Required parts are Battery tray , Left and right wings and tail section
Item #: K22310AF
Condition:
New
In Stock inventory ships within 24 hours. Avio Fiber has a typical eta of 4-6 weeks, Carbon Fiber can take up to 8 weeks due to production times. Please
note supply-chain related delays are possible.
Price: $139.70
ZX10R Tail
Description:
This is only the battery tray/underside of the tail section. It can only be used with the remaining carbonin tail section parts
This is parts of a 5 pcs set
Required parts are Tail Piece , Seat support left and right wings
This is parts of a 5 pcs set
Required parts are Tail Piece , Seat support left and right wings
Item #: K22309AF
Condition:
New
In Stock inventory ships within 24 hours. Avio Fiber has a typical eta of 4-6 weeks, Carbon Fiber can take up to 8 weeks due to production times. Please
note supply-chain related delays are possible.
Price: $152.40
ZX10R Tail
Description:
This is only the top section of the race tail. It can only be used with carbonin tail section
This is parts of a 5 pcs set
Required parts are Battery tray , Seat support left and right wings
This is parts of a 5 pcs set
Required parts are Battery tray , Seat support left and right wings
Item #: K22300AF
Condition:
New
In Stock inventory ships within 24 hours. Avio Fiber has a typical eta of 4-6 weeks, Carbon Fiber can take up to 8 weeks due to production times. Please
note supply-chain related delays are possible.
Price: $230.89
ZX10R tail unit
Description:
This tail unit is for racing and includes
Seat unit top section
Left wing
Right wing
Under tail battery tray
Seat unit bracket and Dzus
Seat Foams need to be purchased separately
Seat unit top section
Left wing
Right wing
Under tail battery tray
Seat unit bracket and Dzus
Seat Foams need to be purchased separately
Item #: K22300AF-Kit
Condition:
New
In Stock inventory ships within 24 hours. Avio Fiber has a typical eta of 4-6 weeks, Carbon Fiber can take up to 8 weeks due to production times. Please
note supply-chain related delays are possible.
Price: $541.00
No Image Available
ZX10r Carbonin bracket Seat unit
Description:
Brackets for mounting tail unit
Item #: IN2201K
Condition:
New
In Stock inventory ships within 24 hours. Avio Fiber has a typical eta of 4-6 weeks, Carbon Fiber can take up to 8 weeks due to production times. Please
note supply-chain related delays are possible.
Price: $24.00
zx10r, Carbon fiber, intake, air intake, fairing stay, fairing bracket,carbonin
Description:
Carbon fiber airbox inlet tube and fairing bracket weighing in at 313grams
Designed to replace the oem tube and bracket.
Designed to replace the oem tube and bracket.
Item #: CK22065
Condition:
New
In Stock inventory ships within 24 hours. Avio Fiber has a typical eta of 4-6 weeks, Carbon Fiber can take up to 8 weeks due to production times. Please
note supply-chain related delays are possible.
Price: $340.00
ZX10R Carbon battery tray for Carbonin Tail
Description:
This is the battery tray section and does not include the following parts:
Left wing
Right wing
Seat unit top
Seat unit bracket and Dzus which all need to be purchased as a Kit under part number CK22300-Kit
These are being sold as replacement parts and do not interchange with the oem bodywork panels
Seat Foams need to be purchased separately
Left wing
Right wing
Seat unit top
Seat unit bracket and Dzus which all need to be purchased as a Kit under part number CK22300-Kit
These are being sold as replacement parts and do not interchange with the oem bodywork panels
Seat Foams need to be purchased separately
Item #: CK22309
Condition:
New
In Stock inventory ships within 24 hours. Avio Fiber has a typical eta of 4-6 weeks, Carbon Fiber can take up to 8 weeks due to production times. Please
note supply-chain related delays are possible.
Price: $244.48
Description:
Carbon fiber rear fender oem replacement
Item #: CK16020
Condition:
New
In Stock inventory ships within 24 hours. Avio Fiber has a typical eta of 4-6 weeks, Carbon Fiber can take up to 8 weeks due to production times. Please
note supply-chain related delays are possible.
Price: $173.36
ZX10R Seat support for Carbonin tail
Description:
Seat Support *requeired for Carbonin Carbon fiber race tail to be mounted
Please note that this will not fit as an interchangeable part with the oen bodywork. It only fits the Carbonin race tail due to its design
Please note that this will not fit as an interchangeable part with the oen bodywork. It only fits the Carbonin race tail due to its design
Item #: CK22310
Condition:
New
In Stock inventory ships within 24 hours. Avio Fiber has a typical eta of 4-6 weeks, Carbon Fiber can take up to 8 weeks due to production times. Please
note supply-chain related delays are possible.
Price: $139.70
Description:
Whether you're riding on the street or on the track it makes sense to protect your frame, swingarm and engine case covers from any possible damage:
Protects against damage
Gravel rash
Road rash
Wet Lay Carbon Fiber with Carbon Kevlar laid on the inside for added protection.
These are light-weight and do not interfere with any OEM bodywork.
These also look great and give your bike a great appearance
Protects against damage
Gravel rash
Road rash
Wet Lay Carbon Fiber with Carbon Kevlar laid on the inside for added protection.
These are light-weight and do not interfere with any OEM bodywork.
These also look great and give your bike a great appearance
Item #: CK18055
Condition:
New
In Stock inventory ships within 24 hours. Avio Fiber has a typical eta of 4-6 weeks, Carbon Fiber can take up to 8 weeks due to production times. Please
note supply-chain related delays are possible.
Price: $220.03
ZX10R Carbon tail unit
Description:
This tail unit is for racing and includes
Seat unit top section
Left wing
Right wing
Under tail battery tray
Seat unit bracket and Dzus
Seat Foams need to be purchased separately
Seat unit top section
Left wing
Right wing
Under tail battery tray
Seat unit bracket and Dzus
Seat Foams need to be purchased separately
Item #: CK22300-Kit
Condition:
New
In Stock inventory ships within 24 hours. Avio Fiber has a typical eta of 4-6 weeks, Carbon Fiber can take up to 8 weeks due to production times. Please
note supply-chain related delays are possible.
Price: $999.00
ZX10R replacement part for Carbonin tail
Description:
Replacement Left hand WInglet for Carbonin Carbon fiber race tail
Please note that this will not fit as an interchangeable part with the oen bodywork. It only fits the Carbonin race tail due to its design
Please note that this will not fit as an interchangeable part with the oen bodywork. It only fits the Carbonin race tail due to its design
Item #: CK22311
Condition:
New
In Stock inventory ships within 24 hours. Avio Fiber has a typical eta of 4-6 weeks, Carbon Fiber can take up to 8 weeks due to production times. Please
note supply-chain related delays are possible.
Price: $150.88
ZX10R replacement part for Carbonin tail
Description:
Replacement Right hand WInglet for Carbonin Carbon fiber race tail
Please note that this will not fit as an interchangeable part with the oen bodywork. It only fits the Carbonin race tail due to its design
Please note that this will not fit as an interchangeable part with the oen bodywork. It only fits the Carbonin race tail due to its design
Item #: CK22312
Condition:
New
In Stock inventory ships within 24 hours. Avio Fiber has a typical eta of 4-6 weeks, Carbon Fiber can take up to 8 weeks due to production times. Please
note supply-chain related delays are possible.
Price: $150.88
ZX10R Carbon tail unit Top Part only
Description:
This is the Seat unit top section and does not include the following parts:
Left wing
Right wing
Under tail battery tray
Seat unit bracket and Dzus which all need to be purchased as a Kit under part number CK22300-Kit
These are being sold as replacement parts and do not interchange with the oem bodywork panels
Seat Foams need to be purchased separately
Left wing
Right wing
Under tail battery tray
Seat unit bracket and Dzus which all need to be purchased as a Kit under part number CK22300-Kit
These are being sold as replacement parts and do not interchange with the oem bodywork panels
Seat Foams need to be purchased separately
Item #: CK22300
Condition:
New
In Stock inventory ships within 24 hours. Avio Fiber has a typical eta of 4-6 weeks, Carbon Fiber can take up to 8 weeks due to production times. Please
note supply-chain related delays are possible.
Price: $375.79
Description:
This is a 1-piece airbox cover that has the side panels built in to Replace the oem Airbox Cover and side panels
It comes Ready to install on your Bike with Perfect Fitment
Made from 100% real Carbon fiber
Light Flexible & Durable
Most Commonly used for Race bikes as this removes the need to remove side panels to get to the fuel tank bolts saving valuable time when working on the bike
It comes Ready to install on your Bike with Perfect Fitment
Made from 100% real Carbon fiber
Light Flexible & Durable
Most Commonly used for Race bikes as this removes the need to remove side panels to get to the fuel tank bolts saving valuable time when working on the bike
Item #: CK16425
Condition:
New
In Stock inventory ships within 24 hours. Avio Fiber has a typical eta of 4-6 weeks, Carbon Fiber can take up to 8 weeks due to production times. Please
note supply-chain related delays are possible.
Price: $393.74
Standard Seat For Kawasaki ZX10R 2020-22
Description:
This seat fits only on Carbonin bodywork
Item #: FM2250K
Condition:
New
In Stock inventory ships within 24 hours. Avio Fiber has a typical eta of 4-6 weeks, Carbon Fiber can take up to 8 weeks due to production times. Please
note supply-chain related delays are possible.
Price: $238.35
26" brake line for roll racing, S1000RR, ZX10r,GSXR , Hayabusa
Description:
Made from Woven Carbon Fiber these Brake lines are Ultra Lightweight and flexible
Designed to Fit Roll race bikes that are lowered.
Line comes from the Master cylinder to the left brake caliper and has 2 45° Forward bends
Will not fit Oem ride height. You must have a strapped and lowered front ride height
Fits BMW S1000RR 2020+ Kawasaki ZX10R and RR Gen GSXR1000 2017+
Woven carbon fiber with Black Aluminum fittings
It is very important to make sure there is no chaffing or rubbing of any bodywork or any parts which could cause damage to this Carbon brake line.
Designed to Fit Roll race bikes that are lowered.
Line comes from the Master cylinder to the left brake caliper and has 2 45° Forward bends
Will not fit Oem ride height. You must have a strapped and lowered front ride height
Fits BMW S1000RR 2020+ Kawasaki ZX10R and RR Gen GSXR1000 2017+
Woven carbon fiber with Black Aluminum fittings
It is very important to make sure there is no chaffing or rubbing of any bodywork or any parts which could cause damage to this Carbon brake line.
Item #: A09C0580
Condition:
New
On-hand inventory ships within 24/48 hours. When out of stock Please expect a 4-week ETA from manufacturer. Please feel free to contact us for any questions.
Price: $100.00
Items 1-60 of 119
- Page 1 of 2
- Next