HHR Performance » 2022

Description: Rotobox BOOST Convex Rear Wheel

The new and improved model BOOST carbon fiber wheel from Rotobox, decreasing the weight from the RBX2 with improved design and higher performance! Comes in gloss and matte finish, in both symmetric and convex designs.

Like the RBX2, the BOOST is produced using Rotobox's unique 3-component composite - combining carbon, epoxy and stainless steel. By integrating the stainless 2,5 mm steel wire in each side of the rim, we increase its impact resistance at the most critical outer part. JWL and DOT approved, having met JASO T203-85 safety standards.

Another hidden BOOST gem - the Structural Rib. Thanks to the High Pressure Core Technology the structural rib is placed in the inner side between the spokes, with its mission to support the stress hot spot of the wheel. As a result the BOOST elegant spoke design brings greater stiffness and although the spokes are thinner the BOOST is stronger than ever - with a permissible static load of 280 kg on the rear and 180kg on the front wheel.

ASSEMBLING COMPONENTS
Carbon fiber composite rim, a one-piece hollow carbon cast, reinforced with stainless steel wire and UV protected; 7075 T6 aluminum alloy hubs, spacers and sprocket carrier [only with rear symmetric wheel]. machined from solid and hard anodized; polyurethane cushion drive set; SKF bearings; aluminum valve stem.

PRODUCT QUALITY CONTROL
Your Rotobox wheel has its own Serial Number to track the production history. We confirm to have performed quality verification procedure of your Rotobox wheel.

SIZE
17" x 6.00"

WEIGHT
REAR WHEEL WEIGHT 2.93 kg / 6.45 LBS

MAX. STATIC LOAD
REAR 280 kg / 617 LBS

MAX. OPERATING TEMPERATURE
100 C / 212 F

MAX. PRESSURE
4 BAR / 58 PSI

The wheels conform to safety standard JASO T203-85 for JWL dotE Certification. Before riding on public streets, be sure to check your local regulations.
Rotobox Boost Wheel set Weight example:
Stock S1000RR 11.70kg (25.79 lbs)
Rotobox Boost 6.69kg (14.74 lbs)
Weight saving more than 5.00kg of rotating mass. Incredible!

Description: Parts Included with Kit
upper race faring (6 Dzus)
lower fairing (4 Dzus)
left side panel right side panel
single race seat/Tail unit(2 pcs)
Airbox Cover With side panels Required to install- Bracket kit for Installation (must be purchased separately) IN403B
There are 2 types of Rear Bracket kits- oem and SBK subframe
There are 3 options for seats

Please Note OEM air intake will need to be modified to fit race bodywork. It is recommended to use the racing fairing bracket and air intake tube

Description: Carbonin Carbon Fiber Fuel Tank Extension 2017-2020 Yamaha YZF-R6
*Carbon Weave will match all other Carbonin products carbon including the Carbonin Airbox Cover W/ Side Panels.
*Made to fit over OEM Tank and perefect fitment with Carbonin Airbox cover
*Created for better braking ergonomics and mid turn handling.
*Keeps you from Sliding forward and also give something for your leg to hold onto in mid corner.
*New design with thicker carbon weave that is lighter and stronger.
*7oz Total weight
*3M Vinyl Tape Included for Installation

Description: Carbonin Carbon Fibre Fuel Tank Extension 2017-2020 Suzuki GSXR 1000
*Picture shown for reference, not actual photo
*Carbon Weave will match all other Carbonin products carbon including the Carbonin Airbox Cover W/ Side Panels.
*Made to fit over OEM Tank and perefect fitment with Carbonin Airbox cover
*Created for better braking ergonomics and mid turn handling.
*Keeps you from Sliding forward and also give something for your leg to hold onto in mid corner.
*New design with thicker carbon weave that is lighter and stronger.
*7oz Total weight
*3M Vinyl Tape Included for Installation

Description: Carbonin Carbon Fiber Race Bodywork (11 pcs w/ 12 Dzus) 2021 Honda CBR1000RR-R
-Will not fit other brands of bodywork
-Created with BSB Team Honda Racing UK
-Dzus are pre-installed, riveted
-Fairings are pre-fitted

Race Bodywork includes:
Upper Race Fairing (4 dzus)
Lower Fairing (4 dzus)
Left Side Panel (2 dzus)
Left Side Panel Wing Cover
Left Side Panel Inner Wing
Right Side Panel (2 dzus)
Right Side Panel Wing Cover
Right Side Panel inner Wing
Tail Unit (2 pcs)
Airbox Cover w/ Side Panels

Brackets Required, but not included with bodywork:
Aluminum Inserts for Tail Unit (4 pcs) ALU2002H
Inox Bracket for Lower Fairing (1 pc) IN2002H
Inox Brackets for Airbox Cover w/ Side Panels (2 pcs) IN2001H

Front fender is optional and not included with Race bodywork.

Seat Foams are optional and not included with Race Bodywork.

Description: Carbonin Carbon Fiber Fuel Tank Extension 2011-2020 Kawasaki ZX10R
*Carbon Weave will match all other Carbonin products carbon including the Carbonin Airbox Cover W/ Side Panels.
*Made to fit over OEM Tank and perefect fitment with Carbonin Airbox cover
*Created for better braking ergonomics and mid turn handling.
*Keeps you from Sliding forward and also give something for your leg to hold onto in mid corner.
*New design with thicker carbon weave that is lighter and stronger.
*7oz Total weight
*3M Vinyl Tape Included for Installation

Description: Parts Included with Kit
upper race faring (6 Dzus)
lower fairing (4 Dzus)
left side panel right side panel
single race seat/Tail unit(2 pcs)
Airbox Cover With side panels Required to install- Bracket kit for Installation (must be purchased separately) IN403B
There are 2 types of Rear Bracket kits- oem and SBK subframe
Optional Not Included -There are 3 options for seats

Basic - This seat is a 15mm neoprene foam glued to a base that is molded from the seat pan of the tail section and then attaches to the seat pan with bolts. Please not that these seat's will only fit carbonin seat pans and seat units. It will not work on any other brand. This foam will wear out like any other foam pad.
Standard - This is an upgrade to the basic seat which is covered in a neoprene material that protects the basic foam and provides the rider a level of grip but without compromising the need to slide side to side. It looks much more professional and will protect the basic foam from any wear from patches on leather suits or abuse from side to side movements. we have seen these seats go on for 3 seasons or more!
Pro Seat - This seat is for riders or teams that require their seat to provide back support or a step seat to keep them in a position from sliding too far back in the seat under acceleration, this is often done with a raised section so they can still get back in the seat in the full tuck, they are just raised up more which helps keep the butt up and their head shoulders and chest lower in the tuck. It is the same material as the standard seat but can also be customized with team logo's or race number -If you purchase a pro seat we will contact you to design your seat. Please note pro seats are made custom to order

Description: Carbonin Avio Fiber Race Bodywork (11 pcs w/ 12 Dzus) 2021 Honda CBR1000RR-R
-Will not fit other brands of bodywork
-Created with BSB Team Honda Racing UK
-Dzus are pre-installed, riveted
-Fairings are pre-fitted
-White Gel Coat ready for Prep & Paint
-Avio Fiber fairings are Reinforced with Carbon Fiber along all trim and edging.

Race Bodywork includes:
Upper Race Fairing (4 dzus)
Lower Fairing (4 dzus)
Left Side Panel (2 dzus)
Left Side Panel Wing Cover
Left Side Panel Inner Wing
Right Side Panel (2 dzus)
Right Side Panel Wing Cover
Right Side Panel inner Wing
Tail Unit (2 pcs)
Airbox Cover w/ Side Panels

Brackets Required, but not included with bodywork:
Aluminum Inserts for Tail Unit (4 pcs) ALU2002H
Inox Bracket for Lower Fairing (1 pc) IN2002H
Inox Brackets for Airbox Cover w/ Side Panels (2 pcs) IN2001H

Front fender is optional and not included with Race bodywork.

Description: Replacement right side Fairing Cover For Carbonin complete fairing, will not fit with other brands
This is the portion that makes the wing and attaches to the carbonin upper and side panel

Description: Replacement Upper Fairing For Carbonin complete fairing, will not fit with other brands or with oem bodywork

Description: Carbonin Basic Seat Unit Short 2021 Honda CBR1000RR-R FM2010HS
-Requires Carbonin Tail Unit for fitment, will not fit OEM Tail.

Basic Short - This seat is a seat foam unit glued to a base that is molded from the seat pan of the tail section and then attaches to the seat pan with bolts. Please not that these seat's will only fit carbonin seat pans and seat units. It will not work on any other brand. This foam will wear out like any other foam pad.

Description: Replacement left side Fairing For Carbonin complete fairing, will not fit with other brands

Description: Replacement lower race Fairing For Carbonin complete fairing, will not fit with other brands
This will work with Kickstand

Description: Replacement right side Fairing For Carbonin complete fairing, will not fit with other brands

Description: Replacement Upper Fairing For Carbonin complete fairing, will not fit with other brands

Description: Carbonin Inox Bracket for Lower Fairing (1 pc) 2021 Honda CBR1000RR-R IN2002H
-Required for fitment of Carbonin 2021 Honda CBR1000RR-R Lower fairing in Carbon Fiber CH20220 or Avio Fiber H20220AF

Description: Carbonin Pro Seat Unit Long 2021 Honda CBR1000RR-R FM260HL
-Requires Carbonin Tail Unit for fitment, will not fit OEM Tail.

Long seats have a lip that comes up the tail units cowl

Pro Seat Long - This Customizable seat is for riders or teams that require their seat to provide back support or a step seat to keep them in a position from sliding too far back in the seat under acceleration, this is often done with a raised section so they can still get back in the seat in the full tuck, they are just raised up more which helps keep the butt up and their head shoulders and chest lower in the tuck. It is the same material as the standard seat but can also be customized with team logo's or race number -If you purchase a pro seat we will contact you to design your seat padding and add your own logo. Please note pro seats are made to order. We will contact you after the order is processed to go thru the creative design process.

Description: Carbonin Pro Seat Unit Short 2021 Honda CBR1000RR-R FM260HS
-Requires Carbonin Tail Unit for fitment, will not fit OEM Tail.

Pro Seat Short - This Customizable seat is for riders or teams that require their seat to provide back support or a step seat to keep them in a position from sliding too far back in the seat under acceleration, this is often done with a raised section so they can still get back in the seat in the full tuck, they are just raised up more which helps keep the butt up and their head shoulders and chest lower in the tuck. It is the same material as the standard seat but can also be customized with team logo's or race number -If you purchase a pro seat we will contact you to design your seat padding and add your own logo. Please note pro seats are made to order. We will contact you after the order is processed to go thru the creative design process.

Description: Carbonin Standard Seat Unit Short 2021 Honda CBR1000RR-R FM2050HS
-Requires Carbonin Tail Unit for fitment, will not fit OEM Tail.

Standard Short - This is an upgrade to the basic seat which is covered in a neoprene material that protects the basic foam and provides the rider a level of grip but without compromising the need to slide side to side. It looks much more professional and will protect the basic foam from any wear from patches on leather suits or abuse from side to side movements. we have seen these seats go on for 3 seasons or more. Comes with standard red Carbonin embroidered logo.

Description: Extreme Components Brake lever for Yamaha R1 (2015/2020) - PED-GP EVO LFR R1

-Made In Italy
-Research and development takes place exclusively through collaboration with the best race teams engaged for years in the most prestigious national and world competitions; And only after specific tests, does Extreme Components start the production.

Description: Alpha Racing 25 mm extension 2D suspension sensor BMW S1000RR 2019-, BMW M1000RR 2021- 7470A113A25
Spacer with threaded connection for extension of spring stroke sensors, made by 2D Datarecording.

- 25 mm extension
- Plastic part with thread

Weight: 0.003 kg

Description: Alpha Racing 2D front suspension sensor 150 mm BMW HP4 Race 2017-2018, BMW S1000RR 2019-, BMW M1000RR 2021-7470HP001A00

2D front suspension sensor 150 mm, for BMW S 1000 RR 2019- (K67) and M 1000 RR 2021- (K66), Linearpotentiometer Slim Body, for M Race Calibration Kit

Description: Alpha Racing Brake Pad Set Duo Sinter Front BMW S1000RR And M1000RR 2021- 3411B901A00
for OEM brake calipers (Nissin)
Brake pad set Duo Sinter, front, for BMW M 1000 RR 2021- (K66) and S 1000 RR 2021- (K67) NISSIN calipers, 2 pads per unit

Description: Alpha Racing Clamp for triple clamp left BMW S1000RR 2019-,M1000RR 2021-31428388983

Clamp for upper triple clamp left, for BMW S 1000 RR 2019- (K67) and M 1000 RR 2021- (K66), needed when racing handlebars are mounted, FIM homologated

Description: Alpha Racing Mounting kit suspension sensor 75 mm, Öhlins TTX GP BMW S1000RR 2019- and BMW M1000RR 2021-3352B019A00

Mounting kit rear suspension sensor 75 mm, for BMW S 1000 RR 2019- (K67) and M 1000 RR 2021- (K66), for Öhlins TTX GP BM568, fits to 2D suspension potentiometer 75 mm

Description: Alpha Racing OZ wheel set Cattiva RS-A BMW S1000RR 2020+ 3631B003A00

OZ Motorbike racing wheel set Cattiva RS-A V2 3,5"/6,00"x17", for BMW S 1000 RR 2020- (K67), forged aluminium wheels, 6 spokes, black matt anodized, incl. sprocket carrier

Description: Alpha Racing PVM rear wheel 3V Design BMW M 1000 RR 2021- 3631B400A02

The 3V Racing wheel by PVM is successfully used in the same configuration by the BMW Motorrad Motorsport teams in the WorldSBK. With the experience of PVM from almost 50 years of racing and the knowledge gained from hard racing with the BMW teams, these lightweight and at the same time robust wheels have been created.
The wheel set achieves a noticeable improvement in handling by reducing the weight of the unsprung masses.

PVM is official supplier of the BMW Motorrad Motorsport WorldSBK teams.

Features:
- Aluminum Racing forged wheel
- 6-spoke design
- anodized, titanium colored
- for OEM and racing brake discs
- incl. 90° angle valve
- Rim anti-slip coated

Please note:
- Racing wheel, only for professional race track use.
- Sprocket with inner diameter 76 mm required.

Weight: 4.00 kg

Comparative values:
BMW OEM forged wheel: 3.14 / 4.42 kg (front/rear, without valves)
BMW OEM carbon wheel: 2.50 / 3.30 kg (front/rear, without valves)

Description: Alpha Racing PVM rear wheel 3V Design BMW S 1000 RR 2019- 3631B300A02

The 3V Racing wheel by PVM is successfully used in the same configuration by the BMW Motorrad Motorsport teams in the WorldSBK. With the experience of PVM from almost 50 years of racing and the knowledge gained from hard racing with the BMW teams, these lightweight and at the same time robust wheels have been created.
The wheel set achieves a noticeable improvement in handling by reducing the weight of the unsprung masses.

PVM is official supplier of the BMW Motorrad Motorsport WorldSBK teams.

Features:
- Aluminum Racing forged wheel
- 6-spoke design
- anodized, titanium colored
- for OEM and racing brake discs
- incl. 90° angle valve
- Rim anti-slip coated

Please note:
- Racing wheel, only for professional race track use.
- Sprocket with inner diameter 76 mm required.

Weight: 4.00 kg

Comparative values:
BMW OEM forged wheel: 3.14 / 4.42 kg (front/rear, without valves)
BMW OEM carbon wheel: 2.50 / 3.30 kg (front/rear, without valves)

Description: Alpha Racing PVM wheel set 3V Design, S 1000 RR 2019- 3631B300A00

The 3V Racing wheel set by PVM is successfully used in the same configuration by the BMW Motorrad Motorsport teams in the WorldSBK. With the experience of PVM from almost 50 years of racing and the knowledge gained from hard racing with the BMW teams, these lightweight and at the same time robust wheels have been created.
The wheel set achieves a noticeable improvement in handling by reducing the weight of the unsprung masses.

PVM is official supplier of the BMW Motorrad Motorsport WorldSBK teams.

Features:
- Aluminum Racing forged wheel set
- 6-spoke design
- anodized, titanium colored
- incl. sprocket carrier
- for OEM and racing brake discs (front/rear)
- incl. 90° angle valves
- front and rear wheel rim anti-slip coated

Please note:
- Racing wheel set, only for professional race track use.
- Sprocket with inner diameter 76 mm required.

Weight: 7.62 kg
Front wheel 2.96 kg
Rear wheel 4.00 kg
Sprocket carrier 0.66 kg

Comparative values:
BMW OEM forged wheel: 3.14 / 4.42 kg (front/rear, without valves)
BMW OEM carbon wheel: 2.50 / 3.30 kg (front/rear, without valves)

Description: Alpha Racing Racing rear brake line BMW S1000 RR 2019- 3432B005A00

Racing rear brake line, for racing rearset, for BMW S 1000 RR 2019- (K67), one-piece

Description: Alpha Racing Radiator Cap, 1.8 Bar BMW HP4 2012-2014, BMW HP4 Race 2017-2018, BMW S1000R 2015-2017-, BMW S1000RR 2009-2019- and BMW M1000RR 2021- 17117687715

Radiator cap 1.8 bar, for OEM radiator different models

Description: Carbonin Aluminum Dashboard Holder 2021 Honda CBR1000RR-R ALU2001H
-Does not include Required Airtube in Carbon Fiber CH20064 or Avio Fiber H20064AF

Description: Carbonin Avio Fiber Airbox Cover with Side Panels 2021 Honda CBR1000RR-R H20425AF
-will not fit with other brands or with your OEM tail unit
-Required for fitment with Carbonin 2021 Honda CBR1000RR-R tail unit in Carbon Fiber CH20300 or Avio Fiber H20300AF due to the mounting design
-Does not include Required Brackets for Airbox Cover (2 pcs) IN2001H

Description: 2020 S1000rr front fender for racing

Description: Replacement lower race Fairing For Carbonin complete fairing, will not fit with other brands or oem fairing
This will work with Kickstand

Description: Parts Included In Complete Race Fairing:
• Upper Race Fairing (6 Dzus)
• Lower Fairing (5 Dzus)
• Left Side Panel
• Right Side Panel
• Single Race Seat With Fuel Tank Panels (4 Pcs; 1 Dzus)

The 2017-2021 GSXR1000 Bodywork requires the following bracketry for fitment:
Aluminum CNC Inserts Side Panels (ALU1202S)
Inox Holders for Lower Fairing (IN1202S)

The The 2017-2021 GSXR1000 Bodywork also will require 1 of the 2 following tail unit inserts:
Aluminum CNC Tail Inserts Quick Release (Quick Release Bracket w/ DZUS) (ALU1204SCNC)
Aluminum CNC Tail Inserts Bolt On (Hard Mount w/ Bolt) (ALU1204SR)

There are 3 seat options available.
Basic - This seat is a 15mm neoprene foam glued to a base that is molded from the seat pan of the tail section and then attaches to the seat pan with bolts. Please not that these seat's will only fit Carbonin seat pans and seat units. It will not work on any other brand. This foam will wear out like any other foam pad.

Standard - This is an upgrade to the basic seat which is covered in a neoprene material that protects the basic foam and provides the rider a level of grip but without compromising the need to slide side to side. It looks much more professional and will protect the basic foam from any wear from patches on leather suits or abuse from side to side movements. we have seen these seats go on for 3 seasons or more!

Pro Seat - This seat is for riders or teams that require their seat to provide back support or a step seat to keep them in a position from sliding too far back in the seat under acceleration, this is often done with a raised section so they can still get back in the seat in the full tuck, they are just raised up more which helps keep the butt up and their head shoulders and chest lower in the tuck. It is the same material as the standard seat but can also be customized with team logo's or race number -If you purchase a pro seat we will contact you to design your seat. Please note pro seats are made custom to order

Carbonin Tail unit will not work with OEM Seat.

Description: Parts Included In Complete Race Fairing:
• Upper Race Fairing (6 Dzus)
• Lower Fairing designed for H20 Oversized radiator
• Left Side Panel (3 Dzus) designed for H20 Oversized radiator
• Right Side Panel (3 Dzus) designed for H20 Oversized radiator
• Single Race Tail (4 Pcs)

Description: Lightweight Carbon fender Oem Replacement

Description: Parts Included In Complete Race Fairing:
• Upper Race Fairing (6 Dzus)
• Lower Fairing
• Left Side Panel for Big Radiator (3 Dzus)
• Right Side Panel for Big Radiator (3 Dzus)
• Single Race Tail (4 Pcs)

Not included
There are 3 options for seats
• Basic - This seat is a 15mm neoprene foam glued to a base that is molded from the seat pan of the tail section and then attaches to the seat pan with bolts. Please not that these seat's will only fit carbonin seat pans and seat units. It will not work on any other brand. This foam will wear out like any other foam pad.
• Standard - This is an upgrade to the basic seat which is covered in a neoprene material that protects the basic foam and provides the rider a level of grip but without compromising the need to slide side to side. It looks much more professional and will protect the basic foam from any wear from patches on leather suits or abuse from side to side movements. we have seen these seats go on for 3 seasons or more!
• Pro Seat - This seat is for riders or teams that require their seat to provide back support or a step seat to keep them in a position from sliding too far back in the seat under acceleration, this is often done with a raised section so they can still get back in the seat in the full tuck, they are just raised up more which helps keep the butt up and their head shoulders and chest lower in the tuck. It is the same material as the standard seat but can also be customized with team logo's or race number -If you purchase a pro seat we will contact you to design your seat. Please note pro seats are made custom to order

Description: Carbon fiber rear fender oem replacement