Description: Parts Included In Complete Race Fairing:
• Upper Race Fairing (6 Dzus)
• Lower Fairing
• Left Side Panel (3 Dzus)
• Right Side Panel (3 Dzus)
• Single Race Tail (4 Pcs)

Not included but required:
IN1901Y Seat Bracket

*Cannot fit OEM Seat

Description:

Description:

Description: Rotobox BOOST Front Wheel

The new and improved model BOOST carbon fiber wheel from Rotobox, decreasing the weight from the RBX2 with improved design and higher performance! Comes in gloss and matte finish, in both symmetric and convex designs.

Like the RBX2, the BOOST is produced using Rotobox's unique 3-component composite - combining carbon, epoxy and stainless steel. By integrating the stainless 2,5 mm steel wire in each side of the rim, we increase its impact resistance at the most critical outer part. JWL and DOT approved, having met JASO T203-85 safety standards.

Another hidden BOOST gem - the Structural Rib. Thanks to the High Pressure Core Technology the structural rib is placed in the inner side between the spokes, with its mission to support the stress hot spot of the wheel. As a result the BOOST elegant spoke design brings greater stiffness and although the spokes are thinner the BOOST is stronger than ever - with a permissible static load of 280 kg on the rear and 180kg on the front wheel.

ASSEMBLING COMPONENTS
Carbon fiber composite rim, a one-piece hollow carbon cast, reinforced with stainless steel wire and UV protected; 7075 T6 aluminum alloy hubs, spacers and sprocket carrier [only with rear symmetric wheel]. machined from solid and hard anodized; polyurethane cushion drive set; SKF bearings; aluminum valve stem.

PRODUCT QUALITY CONTROL
Your Rotobox wheel has its own Serial Number to track the production history. We confirm to have performed quality verification procedure of your Rotobox wheel.

SIZE
17" x 3.5"

WEIGHT
REAR WHEEL WEIGHT 2.58 kg / 5.68 LBS

MAX. STATIC LOAD
REAR 180 kg / 400 LBS

MAX. OPERATING TEMPERATURE
100 C / 212 F

MAX. PRESSURE
4 BAR / 58 PSI

The wheels conform to safety standard JASO T203-85 for JWL dotE Certification. Before riding on public streets, be sure to check your local regulations.
Rotobox Boost Wheel set Weight example:
Stock S1000RR 11.70kg (25.79 lbs)
Rotobox Boost 6.69kg (14.74 lbs)
Weight saving more than 5.00kg of rotating mass. Incredible!

Description:

Description: COST OF SPRINGS INCLUDED IN PRICE

Based on the highly regarded TTX technology it has been developed from Öhlins’ vast experience in MotoGP. Compared with the standard TTX36 MkII, the compression and rebound adjustments have improved even further with a new adjustment needle, providing better guidance and a different flow restriction behavior. The function of the damper is more consistent with less variation and the adjusters work in a more precise manner. A new main piston completes the package, designed to improve traction and rider control. Did we mention that the weight is reduced even further? Among the advantages are a much improved chassis feedback as well as enhanced performance. Also, the adjustment range is even wider and with this new design, the variation in behavior from one shock absorber to another is further reduced – a proof of Öhlins commitment to precision. The TTX GP continues on the TTX36 path, sharing and improving on the benefits of one of the best shock absorbers in the world. TTX GP will be available for most major bikes used in national racing as well as the new street bike models.
Specs

Description: Extreme Components Brake lever for Yamaha R1 (2015/2020) - PED-GP EVO LFR R1

-Made In Italy
-Research and development takes place exclusively through collaboration with the best race teams engaged for years in the most prestigious national and world competitions; And only after specific tests, does Extreme Components start the production.

Description: Parts Included In Complete Race Fairing:
• Upper Race Fairing (6 Dzus)
• Lower Fairing
• Left Side Panel (3 Dzus)
• Right Side Panel (3 Dzus)
• Single Race Tail (4 Pcs)

Not included but required:
IN1901Y Seat Bracket

*Cannot use theOEM Seat with this tail

Description: Parts Included In Complete Race Fairing:
• Upper Race Fairing (6 Dzus)
• Lower Fairing
• Left Side Panel for Big Radiator (3 Dzus)
• Right Side Panel for Big Radiator (3 Dzus)
• Single Race Tail (4 Pcs)

Not included
There are 3 options for seats
• Basic - This seat is a 15mm neoprene foam glued to a base that is molded from the seat pan of the tail section and then attaches to the seat pan with bolts. Please not that these seat's will only fit carbonin seat pans and seat units. It will not work on any other brand. This foam will wear out like any other foam pad.
• Standard - This is an upgrade to the basic seat which is covered in a neoprene material that protects the basic foam and provides the rider a level of grip but without compromising the need to slide side to side. It looks much more professional and will protect the basic foam from any wear from patches on leather suits or abuse from side to side movements. we have seen these seats go on for 3 seasons or more!
• Pro Seat - This seat is for riders or teams that require their seat to provide back support or a step seat to keep them in a position from sliding too far back in the seat under acceleration, this is often done with a raised section so they can still get back in the seat in the full tuck, they are just raised up more which helps keep the butt up and their head shoulders and chest lower in the tuck. It is the same material as the standard seat but can also be customized with team logo's or race number -If you purchase a pro seat we will contact you to design your seat. Please note pro seats are made custom to order

Description: Extreme Components GP EVO Rearsets Kit STD And Reverse Shifting Carbon Fiber Black Heel (FOR AKRAPOVIC RACING FULL SYSTEM) YAMAHA R1 (2020/2022) PED-GP EVO R1C AK
-Made In Italy
-Research and development takes place exclusively through collaboration with the best race teams engaged for years in the most prestigious national and world competitions; And only after specific tests, does Extreme Components start the production.

Description: Extreme Components GP Handlebars 15mm offset - Diameter 50mm - SEMI GP 50
-Made In Italy
-Research and development takes place exclusively through collaboration with the best race teams engaged for years in the most prestigious national and world competitions; And only after specific tests, does Extreme Components start the production.

Description: Akrapovic  Evolution Line Titanium Stainless system 15-21 Yamaha R1/M
Evolution Line (Titanium)Muffler with Stainless headers
S-Y10R15-APLT

Description: Titanium Link pipe

Description: Part No: YAM-15R1-L5-004-S01
● Ideal for racing, to save space and weight where it matters.
● Switch is designed to navigate your dash menu functions while omitting all street options (horn, turn signals, head lights). Switch fits plug and play all latest generation 2015+ Yamaha R1 models equipped with YEC Race Kit ECU and wiring loom. This includes the new 2020 R1.
● Main functions are select (mode in oem switch), quick change menu navigation UP/DWN, pit speed limiter and engine map switch.
● Designed and CNC machined in United States from aircraft grade aluminium to be the smallest and lightest on the market.
● Premium buttons with gold plated contact surfaces, manufactured in United States by Otto Engineering.
● This switch will save you twice the space on the clip on occupied by OEM switch. Not to mention that WSBK cockpit look !

Description: Five (5) button Left handle bar race switch for Yamaha R1 2015+
Part No: YAM-15R1-L5-001-S01
● Ideal for racing, to save space and weight where it matters.
● Switch is designed to navigate your dash menu functions while omitting all street options (horn, turn signals, head lights). Switch fits plug and play all latest generation 2015+ Yamaha R1 models equipped with OEM or YEC wiring loom and if equipped with flash tune allows for a pit speed limiter button.

● Main functions are select (mode in oem switch), quick change menu navigation UP/DWN, pit speed limiter and lap timer.

● Designed and CNC machined in United States from aircraft grade aluminium to be the smallest and lightest on the market.
● Premium military grade buttons, manufactured in United States by Otto Excellence
● This switch will save you twice the space on the clip on occupied by OEM switch. Not to mention that WSBK cockpit look !

PRODUCT OPTION: YOU CAN OPT TO REPLACE THE L (LAP) BUTTON WITH A LATCHING BUTTON TO WIRE AND CONTROL YOUR RAIN LIGHT OR OTHER AUXILIARY FUNCTIONS. PLEASE SELECT THE APPROPRIATE OPTION. OTHERWISE PUT IT IN NOTES DURING CHECKOUT OR GIVE US A CALL

NOTE: PIT SPEED LIMITER BUTTON WILL ONLY WORK ON BIKES WITH FLASH TUNE PIT ENABLED OR YEC ECU!!! IF YOU DO NOT NEED THE PIT LIMITER WE HAVE A 4 BUTTON PRODUCT PART NO YR15L4MLE

NOTE: CLUTCH WIRE IS NOT INCLUDED. CAN BE SUPPLIED ON REQUEST AT A 10$ CHARGE. PART NUMBER CLW1. ENTER PART NUMBER IN THE PRODUCT SEARCH FILED AND ADD IT TO CART.

Description: ATTACK PERFORMANCE BRAKE LEVER GUARD KIT, AERO HARD 901132G
MADE IN USA To Fit with Attack Clipon Tubes Please Note these DO not fit with all aftermarket clipons At Attack Performance they have set up many championship winning chassis along with designing, manufacturing, and building our own MotoGP machine with their own parts. Attack Performance utilizes chassis simulation software to find critical dimensions such as Rake, Trail, Wheel Forces, and Linkage Ratios, just to name a few. Those tools combined with their decades of racing eliminates the guesswork from chassis setup.

Description: ATTACK PERFORMANCE BRAKE LEVER GUARD KIT, BLACK 901132B
MADE IN USA To Fit with Attack Clipon Tubes Please Note these DO not fit with all aftermarket clipons At Attack Performance they have set up many championship winning chassis along with designing, manufacturing, and building our own MotoGP machine with their own parts. Attack Performance utilizes chassis simulation software to find critical dimensions such as Rake, Trail, Wheel Forces, and Linkage Ratios, just to name a few. Those tools combined with their decades of racing eliminates the guesswork from chassis setup.

Description: ATTACK PERFORMANCE HANDLE BAR KIT, ZERO OFFSET, 50MM, BLACK 901131.50B
MADE IN USA At Attack Performance they have set up many championship winning chassis along with designing, manufacturing, and building our own MotoGP machine with their own parts. Attack Performance utilizes chassis simulation software to find critical dimensions such as Rake, Trail, Wheel Forces, and Linkage Ratios, just to name a few. Those tools combined with their decades of racing eliminates the guesswork from chassis setup.

Description: ATTACK PERFORMANCE LIFT MOUNT - SPROCKET GUARD KIT, YZF R1 15 - , R6 17- , AERO HARD 121118G
MADE IN USA

Description: ATTACK PERFORMANCE REAR SET KIT WITH SHIFT LEVER, YZF R1 15- , AERO HARD 121110G
MADE IN USA At Attack Performance they have set up many championship winning chassis along with designing, manufacturing, and building our own MotoGP machine with their own parts. Attack Performance utilizes chassis simulation software to find critical dimensions such as Rake, Trail, Wheel Forces, and Linkage Ratios, just to name a few. Those tools combined with their decades of racing eliminates the guesswork from chassis setup.

Description: ATTACK PERFORMANCE REAR SET KIT WITH SHIFT LEVER, YZF R1 15- , BLACK 121110B
MADE IN USA At Attack Performance they have set up many championship winning chassis along with designing, manufacturing, and building our own MotoGP machine with their own parts. Attack Performance utilizes chassis simulation software to find critical dimensions such as Rake, Trail, Wheel Forces, and Linkage Ratios, just to name a few. Those tools combined with their decades of racing eliminates the guesswork from chassis setup.

Description: Bonamici Racing Aluminium Dashboard Protection Yamaha YZF R1 / R1M 2015 - 2023 DCP04

Worried about potential damage happening to your beautiful R1/R1M? Look no further as Bonamici has released this specifically designed for the latest R1/R1M to help protect your dashboard from anything unwanted touching the expensive TFT Dash, leading to potential damage. Manufactured from Billet Aluminium which is suitable for absorbing shocks while featuring a plexi-glass protective panel which is treated to an anti-fog finish to ensure your dashboard is visible in all conditions.

Description: Bonamici Racing Aluminium Rearsets Yamaha YZF R1/R1M 2015 - Y011

Bonamici Rearsets are made from a single piece of billet aluminium in their factory based in Italy, with a black anodised finish for corrosion resistance and durability. These Rearsets are incredibly high quality. To ensure compatibility, Bonamici laser scan each and every bike they manufacture parts for in order to ensure fitment, after this their parts are fine tuned, tested and validated through various levels of Motorsport meaning you can have complete confidence in these Rearsets to transform your R1 / R1M! These Rearsets allow you to decide where you would like the footpegs to be mounted, featuring multiple different mounting positions you can rest assured that these Rearsets will improve the handling, comfort and appearance of your Yamaha YZF-R1 / R1M!

Description: Bonamici Racing Aluminum chain adjuster Yamaha YZF R1 20-23 CHAD11_BK

Bonamici Racing is an Italian manufacturer of CNC machined performance parts such as rearsets, engine covers, chain adjusters, triple clamps, dashboard covers, clip-ons, levers, chain protectors, etc. Bonamici Racing is supplier to numerous teams in e.g. the World Superbikes (WSBK) and Endurance World Campionship (EWC). Everything is made in Italy.

Description: Bonamici Racing Engine Protection Full Kit For YZF R1/R1M 2015-2023 CP047

From the cooperation with racing teams from the Superbike World Championship, the aluminum engine cover protectors from Bonamici Racing were born. Manufactured from high quality billet aluminum and milled using the latest CNC technology, the anodised protector kits perfectly protect the bike’s engine housing in the event of a crash.
The lightweight aluminium protectors are simply screwed onto the original engine housing and guarantee a perfect fit.
No glue is needed!
High end quality made in Italy

Description: Bonamici Racing Engine Protection Right Side (Clutch) For YZF R1/R1M 2015-2023 CP045

From the cooperation with racing teams from the Superbike World Championship, the aluminium engine cover protectors from Bonamici Racing were born. Manufactured from high quality billet aluminium and milled using the latest CNC technology, the anodised protector kits perfectly protect the bike’s engine housing in the event of a crash.
The lightweight aluminium protectors are simply screwed onto the original engine housing and guarantee a perfect fit.
No glue is needed!
High end quality made in Italy

Description: Bonamici Racing Engine Protection Right Side (distribution) For YZF R1/R1M 2015-2023 CP044

From the cooperation with racing teams from the Superbike World Championship, the aluminium engine cover protectors from Bonamici Racing were born. Manufactured from high quality billet aluminium and milled using the latest CNC technology, the anodised protector kits perfectly protect the bike’s engine housing in the event of a crash.
The lightweight aluminium protectors are simply screwed onto the original engine housing and guarantee a perfect fit.
No glue is needed!
High end quality made in Italy

Description: Bonamici Racing Glass Spare Part Yamaha YZF R1 / R1M  SP_DCP04

Replacement glass for instrumentation protection in in high transparency plexiglass.
Designed to prevent damages caused by falls, it‘s provided by a PMMA protective screen with anti-fog ventilation that also protects display from accidental impacts of objects such as stones.

Description: * Pricing is per caliper, dual disc applications must order two
NOTE: We recommend replacing piston seals when installing the ventilated Caliper Racing Pistons
For Yamaha R1 R1/S and R1M R6

Description: 19RCS CORSA CORTA RR – Race Replica Radial master cylinder
Many new features have been introduced for this new radial brake master cylinder, the closest to those used in top motorbike racing. Machined from billet, like the master cylinder used in MotoGP and SBK, the design of the new Brembo 19RCS CORSA CORTA RR has been modified to make it lighter and even more similar to the racing versions. The hard oxidized finish, in titanium grey, ensures outstanding wear resistance and extremely low friction between moving parts. It comes in a darker color than the previous version, precisely because of the type of treatment, making it even more similar to the versions used in Moto2 and Moto3.

Description: Brake Pad Set, Z04 for R1 15+, R6, 748, 916, Shape D

Description:

Yamaha

Narrow Band rotor which requires brake caliper replacement
Item Summary
320mm x 6.75mm Disc (super Thick)
THIS IS NOT A NORMAL T-Drive Rotor
Used Extensively in World Superbike
Price is for Single Rotor
Replaces Old Style 12 Button Brembo Racing Rotors
About the Product
320mm x 6.75mm Disc (super Thick)
THIS IS NOT A NORMAL T-Drive Rotor
Used Extensively in World Superbike
Price is for Single Rotor
Replaces Old Style 12 Button Brembo Racing Rotors

Description:

Floating, Black Carrier, Yamaha

Derived from the experience gained in SBK and MotoGP, the brand new T-Drive disc is the natural technical evolution of latest generation Brembo competition brake discs. The special shape of the 8 “T” pins on the disc and the eight shapes on the braking torque dragging system housing are the innovative element which strongly differentiates the new T-Drive from discs with cylindrical bushing systems. In fact, as a result of specific studies into process and machining tolerances, this unique configuration transfers braking torque more effectively, providing improved resistance to thermo-mechanical stress, especially in extreme conditions of use such as racing.
The connection between housing and rotor is ensured by a special guillotine hooking system (patent pending) which allows both radial and axial floating and reduces the overall weight of the disc, resulting in a significant advantage in terms of rideability compared to the traditional bushing system. Both performance consistency and the efficiency of disc and brake pads coupling during the running-in period have been significantly improved thanks to a rotor - in steel identical to that used for the discs in SBK and MotoGP - characterised by a new differentiated diameter hole pattern. The rotor height has also been optimised: maintaining a thickness of 5.5 mm, the height could be reduced to the advantage of containing weight and the moment of inertia with the consequential benefit of improved vehicle handling.
The housing is black anthracite anodised like latest generation racing discs. The Brembo logo is on the housing, machined from billet and painted in an unmistakeable red, yet another distinctive sign that characterises the racing image. All of the Brembo “T-Drive” discs can also boast the approval of the renowned TUV Certification Body which means they can be used on public roads in all countries that recognise this certification.
The T-drive discs are available both with the same diameter as the original discs, to which they are totally interchangeable, as well as with greater diameter, for which the appropriate spacers must be purchased separately. For more information please contact your local dealer.

Description: Carbonin Aluminum Dashboard Holder 2015-2022 Yamaha R1 Race use only (not suitable for street use)

*Airbox Inlet tube need for proper fitment
2015-2024 Yamaha R1 Carbon Airbox Inlet Tube CY19064
2015-2024 Yamaha R1 Avio Airbox Inlet Tube Y19064AF
x2 DZUS and x2 Nylon Washer

Description: Carbonin Avio Fiber Fuel Tank Extension 2015-20 Yamaha R1/M
*Now available in avio fiber which can be painted with your bodywork
*Made to fit over OEM Tank and perfect fitment with Carbonin Airbox cover
*Created for better braking ergonomics and mid turn handling.
*Keeps you from Sliding forward and also give something for your leg to hold onto in mid corner.
*3M Vinyl Tape Included for Installation

Description: Replacement upper fairing with 6 Dzus

Description: This is a 1 piece airbox cover that has the side panels built in to Replace the oem Airbox Cover and side panels
It comes Ready to install on your Bike with Perfect Fitment
Made from avio fiber with epoxy resin.

Description: Carbonin Carbon Fiber Front Fender Yamaha 17-20 R6, 15-20 R1

Description: Replacement Left side panel for oem radiator version race fairing only.
This is does not fit with oem bodywork