HHR Performance » 2023, Yamaha

Description: Armour Bodies Yamaha R7 2022-23 Supersport Kit 71-0417SS

Description: Armour Bodies Yamaha R7 2022 Superbike Seat Base Pad 71-0417PAD

Description: Parts Included In Complete Race Fairing:
• Upper Race Fairing (6 Dzus)
• Lower Fairing
• Left Side Panel (3 Dzus)
• Right Side Panel (3 Dzus)
• Single Race Tail (4 Pcs)

Not included but required:
IN1901Y Seat Bracket

*Cannot fit OEM Seat

Description: Ohlins TTX 22 Cartridge Kit FCX 1303 for Yamaha YZ 125, Beta Racing, Sherco Factory 2013-2023

Never mind the outside ... it's the inside that counts. True for the MX cartridge kit with the powerful TTX-technology.
The same damping system technology, found in our Öhlins front forks, is also available as replacement cartridge kits for your standard front forks. Reduce bottom outs simply by installing the kits straight into your bike’s front forks, while also improving stability, hold-up, higher definition front wheel feedback, settled movement, and ability to handle bigger impacts. When you take on the track, we want you to experience a ride out of the ordinary.

Description: Parts Included In Complete Race Fairing:
• Upper Race Fairing (6 Dzus)
• Lower Fairing designed for H20 Oversized radiator
• Left Side Panel (3 Dzus) designed for H20 Oversized radiator
• Right Side Panel (3 Dzus) designed for H20 Oversized radiator
• Single Race Tail (4 Pcs)

Description: Parts Included In Complete Race Fairing:
• Upper Race Fairing (6 Dzus)
• Lower Fairing
• Left Side Panel for Big Radiator (3 Dzus)
• Right Side Panel for Big Radiator (3 Dzus)
• Single Race Tail (4 Pcs)

Not included
There are 3 options for seats
• Basic - This seat is a 15mm neoprene foam glued to a base that is molded from the seat pan of the tail section and then attaches to the seat pan with bolts. Please not that these seat's will only fit carbonin seat pans and seat units. It will not work on any other brand. This foam will wear out like any other foam pad.
• Standard - This is an upgrade to the basic seat which is covered in a neoprene material that protects the basic foam and provides the rider a level of grip but without compromising the need to slide side to side. It looks much more professional and will protect the basic foam from any wear from patches on leather suits or abuse from side to side movements. we have seen these seats go on for 3 seasons or more!
• Pro Seat - This seat is for riders or teams that require their seat to provide back support or a step seat to keep them in a position from sliding too far back in the seat under acceleration, this is often done with a raised section so they can still get back in the seat in the full tuck, they are just raised up more which helps keep the butt up and their head shoulders and chest lower in the tuck. It is the same material as the standard seat but can also be customized with team logo's or race number -If you purchase a pro seat we will contact you to design your seat. Please note pro seats are made custom to order

Description: Five (5) button Left handle bar race switch for Yamaha R1 2015+
Part No: YAM-15R1-L5-001-S01
● Ideal for racing, to save space and weight where it matters.
● Switch is designed to navigate your dash menu functions while omitting all street options (horn, turn signals, head lights). Switch fits plug and play all latest generation 2015+ Yamaha R1 models equipped with OEM or YEC wiring loom and if equipped with flash tune allows for a pit speed limiter button.

● Main functions are select (mode in oem switch), quick change menu navigation UP/DWN, pit speed limiter and lap timer.

● Designed and CNC machined in United States from aircraft grade aluminium to be the smallest and lightest on the market.
● Premium military grade buttons, manufactured in United States by Otto Excellence
● This switch will save you twice the space on the clip on occupied by OEM switch. Not to mention that WSBK cockpit look !

PRODUCT OPTION: YOU CAN OPT TO REPLACE THE L (LAP) BUTTON WITH A LATCHING BUTTON TO WIRE AND CONTROL YOUR RAIN LIGHT OR OTHER AUXILIARY FUNCTIONS. PLEASE SELECT THE APPROPRIATE OPTION. OTHERWISE PUT IT IN NOTES DURING CHECKOUT OR GIVE US A CALL

NOTE: PIT SPEED LIMITER BUTTON WILL ONLY WORK ON BIKES WITH FLASH TUNE PIT ENABLED OR YEC ECU!!! IF YOU DO NOT NEED THE PIT LIMITER WE HAVE A 4 BUTTON PRODUCT PART NO YR15L4MLE

NOTE: CLUTCH WIRE IS NOT INCLUDED. CAN BE SUPPLIED ON REQUEST AT A 10$ CHARGE. PART NUMBER CLW1. ENTER PART NUMBER IN THE PRODUCT SEARCH FILED AND ADD IT TO CART.

Description: Armour Bodies Yamaha R3 Armour Bodies Pro Series - Superbike Seat Base 71-0403SSB

Description: Bonamici Racing Aluminium Brake Lever With Racing Remote Adjuster For Yamaha YZF R7 2021 RALB220R

Designed specifically for the Yamaha YZF R7, this Brake Lever from Bonamici will improve the look and feel of the hand levers on your BMW. Bonamici Levers are made from a single piece of billet aluminium in their factory based in Italy, with a black anodised finish for corrosion resistance and durability. These levers are incredibly high quality and offer great value for money, making them perfect for the Track Day warrior!

Description: Bonamici Racing Aluminium Brake Lever With Remote Adjuster For Yamaha YZF R7 2021 RALB220

Designed specifically for the Yamaha YZF R7, this Brake Lever from Bonamici will improve the look and feel of the hand levers on your BMW. Bonamici Levers are made from a single piece of billet aluminium in their factory based in Italy, with a black anodised finish for corrosion resistance and durability. These levers are incredibly high quality and offer great value for money, making them perfect for the Track Day warrior!

Description: Bonamici Racing Aluminium Dashboard Protection YZF R7 2021- 2023 DCP16

Worried about potential damage happening to your Yamaha R7 instrument cluster? Look no further as Bonamici has released this specifically designed for the latest R7 to help protect your dash from anything unwanted touching the expensive screen, leading to potential damage. Manufactured from Billet Aluminium which is suitable for absorbing shocks while featuring a plexi-glass protective panel which is treated to an anti-fog finish, to ensure your dashboard is visible in all conditions.

Description: Bonamici Racing Aluminium Lever Kit Yamaha YZF R7 2021 - 2023 KL340

Designed specifically for the YZF R7, this Brake and Clutch Lever Kit from Bonamici will improve the look and feel of the hand levers on your Yamaha. Bonamici Levers are made from a single piece of billet aluminium in their factory based in Italy, with a black anodised finish for corrosion resistance and durability. These levers are incredibly high quality and offer great value for money, making them perfect for the Track Day warrior! Bonamici laser scan each and every bike they manufacture parts for in order to ensure fitment and compatibility, after this their parts are fine tuned, tested and validated through various levels of Motorsport.

Description: Bonamici Racing Aluminium Rearsets Yamaha YZF R7 2021 - Y015

Bonamici Rearsets are made from a single piece of billet aluminium in their factory based in Italy, with a black anodised finish for corrosion resistance and durability. These Rearsets are incredibly high quality. To ensure compatibility, Bonamici laser scan each and every bike they manufacture parts for in order to ensure fitment, after this their parts are fine tuned, tested and validated through various levels of Motorsport meaning you can have complete confidence in these Rearsets to transform your Yamaha! These Rearsets allow you to decide where you would like the footpegs to be mounted, featuring multiple different mounting positions you can rest assured that these Rearsets will improve the handling, comfort and appearance of your R7!

Description: Bonamici Racing Aluminium Swing Arms Spools Racing 6 mm 0027

Description: Bonamici Racing Aluminum chain adjuster Yamaha YZF R6 17-23 CHAD07_BK

Bonamici Racing is an Italian manufacturer of CNC machined performance parts such as rearsets, engine covers, chain adjusters, triple clamps, dashboard covers, clip-ons, levers, chain protectors, etc. Bonamici Racing is supplier to numerous teams in e.g. the World Superbikes (WSBK) and Endurance World Campionship (EWC). Everything is made in Italy.

Description: Bonamici Racing Aluminum rearsets Yamaha YZF MT-09 21-23 Y016

Bonamici Rearsets are made from a single piece of billet aluminium in their factory based in Italy, with a black anodised finish for corrosion resistance and durability. These Rearsets are incredibly high quality. To ensure compatibility, Bonamici laser scan each and every bike they manufacture parts for in order to ensure fitment, after this their parts are fine tuned, tested and validated through various levels of Motorsport meaning you can have complete confidence in these Rearsets to transform your Yamaha! These Rearsets allow you to decide where you would like the footpegs to be mounted, featuring multiple different mounting positions you can rest assured that these Rearsets will improve the handling, comfort and appearance of your R7!

Description: Bonamici Racing Engine Protection Full Kit For Yamaha YZF R6 2006 - 2023 CP025

From the cooperation with racing teams from the Superbike World Championship, the aluminium engine cover protectors from Bonamici Racing were born. Manufactured from high quality billet aluminium and milled using the latest CNC technology, the anodised protector kits perfectly protect the bike’s engine housing in the event of a crash.
The lightweight aluminium protectors are simply screwed onto the original engine housing and guarantee a perfect fit.
No glue is needed!
High end quality made in Italy

Description: Bonamici Racing Engine Protection Full Kit For YZF R1/R1M 2015-2023 CP047

From the cooperation with racing teams from the Superbike World Championship, the aluminum engine cover protectors from Bonamici Racing were born. Manufactured from high quality billet aluminum and milled using the latest CNC technology, the anodised protector kits perfectly protect the bike’s engine housing in the event of a crash.
The lightweight aluminium protectors are simply screwed onto the original engine housing and guarantee a perfect fit.
No glue is needed!
High end quality made in Italy

Description: Bonamici Racing Engine Protection Left Side For YZF R1/R1M 2015-2023 CP046

From the cooperation with racing teams from the Superbike World Championship, the aluminium engine cover protectors from Bonamici Racing were born. Manufactured from high quality billet aluminium and milled using the latest CNC technology, the anodised protector kits perfectly protect the bike’s engine housing in the event of a crash.
The lightweight aluminium protectors are simply screwed onto the original engine housing and guarantee a perfect fit.
No glue is needed!
High end quality made in Italy

Description: Bonamici Racing Engine Protection Right Side (Clutch) For Yamaha YZF R6 2006 - 2023 CP023

From the cooperation with racing teams from the Superbike World Championship, the aluminium engine cover protectors from Bonamici Racing were born. Manufactured from high quality billet aluminium and milled using the latest CNC technology, the anodised protector kits perfectly protect the bike’s engine housing in the event of a crash.
The lightweight aluminium protectors are simply screwed onto the original engine housing and guarantee a perfect fit.
No glue is needed!
High end quality made in Italy

Description: Bonamici Racing Engine Protection Right Side (distribution) For YZF R1/R1M 2015-2023 CP044

From the cooperation with racing teams from the Superbike World Championship, the aluminium engine cover protectors from Bonamici Racing were born. Manufactured from high quality billet aluminium and milled using the latest CNC technology, the anodised protector kits perfectly protect the bike’s engine housing in the event of a crash.
The lightweight aluminium protectors are simply screwed onto the original engine housing and guarantee a perfect fit.
No glue is needed!
High end quality made in Italy

Description: Bonamici Racing Engine Protection Right Side For Yamaha YZF R6 2006 - 2023 CP022

From the cooperation with racing teams from the Superbike World Championship, the aluminium engine cover protectors from Bonamici Racing were born. Manufactured from high quality billet aluminium and milled using the latest CNC technology, the anodised protector kits perfectly protect the bike’s engine housing in the event of a crash.
The lightweight aluminium protectors are simply screwed onto the original engine housing and guarantee a perfect fit.
No glue is needed!
High end quality made in Italy

Description: Bonamici Racing Glass Spare Part Yamaha YZF R1 / R1M  SP_DCP04

Replacement glass for instrumentation protection in in high transparency plexiglass.
Designed to prevent damages caused by falls, it‘s provided by a PMMA protective screen with anti-fog ventilation that also protects display from accidental impacts of objects such as stones.

Description: Bonamici Racing Glass Spare Part Yamaha YZF R7 2021 - SP_DCP16

Replacement glass for instrumentation protection in in high transparency plexiglass.
Designed to prevent damages caused by falls, it‘s provided by a PMMA protective screen with anti-fog ventilation that also protects display from accidental impacts of objects such as stones.

Description: 15RCS CORSA CORTA RR – Race Replica Radial master cylinder used for single caliper Bikes
Many new features have been introduced for this new radial brake master cylinder, the closest to those used in top motorbike racing. Machined from billet, like the master cylinder used in MotoGP and SBK, the design of the new Brembo 15RCS CORSA CORTA RR has been modified to make it lighter and even more similar to the racing versions. The hard oxidized finish, in titanium grey, ensures outstanding wear resistance and extremely low friction between moving parts. It comes in a darker color than the previous version, precisely because of the type of treatment, making it even more similar to the versions used in Moto2 and Moto3.

Description: 17RCS CORSA CORTA RR – Race Replica Radial master cylinder Suited for Bikes that come with Brembo Calipers or 34mm pistons
Many new features have been introduced for this new radial brake master cylinder, the closest to those used in top motorbike racing. Machined from billet, like the master cylinder used in MotoGP and SBK, the design of the new Brembo 17RCS CORSA CORTA RR has been modified to make it lighter and even more similar to the racing versions. The hard oxidized finish, in titanium grey, ensures outstanding wear resistance and extremely low friction between moving parts. It comes in a darker color than the previous version, precisely because of the type of treatment, making it even more similar to the versions used in Moto2 and Moto3.

Description: Brake Pad Set, Z04 for R1 15+, R6, 748, 916, Shape D

Description: Set includes left and right calipers

BRAKE PADS ARE INCLUDED

Built from a single billet piece of aluminum and through careful machining, the Brembo GP4-RB brake calipers are a really important upgrade to the production system.

The improvement in terms of performance and safety is guaranteed as well as its characteristics in terms of power, lightness and modularity are guaranteed.

The body is entirely in aluminum alloy with 22.5 mm offset and 108 mm mounting size.

The braking mechanism is entrusted to 4 totally aluminum 30/34 mm pistons.

The aesthetics are no less with the completely black body and the Brembo logo in glossy red.



TECHNICAL FEATURES:

- Wheelbase: 108 mm

- Offset: 22,5 mm

- Piston diameter: 30 mm

- No. of pistons: 4

- Pistons material: Aluminum

- H brake band: 34 mm

- Finish: Black oxidation

Description:

19 RCS Corsa Corta, Long Lever, Radial, Front

The Brembo radial master cylinder with 6 different brake modulation options. The 19RCS CORSA CORTA is characterized by the possibility it provides the rider to adapt the braking "bite point" to the desired riding feeling, in addition to the RCS (Ratio Click System), introduced 10 years ago on the Brembo 19RCS radial brake master cylinder, which allows the center distance of the master cylinder to be adjusted to "18" or "20".
The meticulous study to improve the master cylinder has allowed Brembo to propose three brake master cylinders in one and to further improve braking system performance. Furthermore, taking advantage of the mixture stemming from the 18 to 20 center distance and the three maps - R,S,N - no less than 6 different combinations can be attained.
The play selector lets the rider choose between the three different available feeling maps. With the Normal map, the bite point position is such to guarantee a more gradual initial phase and is therefore suitable for city riding or braking in poor grip conditions. With the Sport map, the bite point position is such to shorten the initial phase compared to the N setting. This second map allows for a more dynamic response and a sportier riding style.
Lastly, with the Race map, the eccentric device allows the initial phase to be shortened even more, taking it to a minimum value at the same level as the master cylinders used in MotoGP: this way, the rider is able to reach the braking bite point at lighting fast speeds. This third map is ideal for a racing riding style that shaves off precious hundredths of a second in braking.
The RCS system (Ratio Click System), on the other hand, shifts the distance between the fulcrum point and the point of application on the master cylinder push rod by 2 millimeters: this results in a different distribution of the braking force without it being modified in terms of pure power.
The master cylinder body is made of forge aluminum alloy, machined with 5-axis CAM technology. A hard oxide coating is used for the surface finish, which guarantees that the master cylinder main body is highly resistant to wear and its components move easily. The floating piston and the seals derive directly from those used in MotoGP, as do the housings for the bleeding and fueling systems, which are inclined by more than 30° to make bleeding the master cylinder easier. A study was conducted for the design of the 19RCS CORSA CORTA in order to find consistency of style between all the components of the master cylinder, which now has a distinct, dynamic and sporty look in line with the style of the bikes for which it was conceived (model or design filed simultaneously with the filing of the patent on the technological solution). The lever assembly can be replaced without disassembling the RCS system (Ratio Click System) from the master cylinder and this allows the calibrations made in the installation phase to be maintained unaltered.

Description: DIRECTLY DERIVED FROM MOTOGP AND APPROVED FOR ROAD USE, THE RENEWED BREMBO SOLUTION IS ALREADY AN EMBLEM OF PURE PERFORMANCE AND ABSOLUTE SPORTINESS
RADIAL BRAKE CALIPERS BREMBO RACING



Version: GP4-MS

Piston number: 4 , 30mm

Calipers material: billet aluminum CNC with nickel finish

Calipers body:  Monoblock

Piston material: Aluminum 

Wheelbase: 108mm

Off set: 30mm



CALIPERS SUPPLIED WITH PADS 07BB3793

Description: Carbonin Avio Fiber Fuel Tank Extension 2015-20 Yamaha R1/M
*Now available in avio fiber which can be painted with your bodywork
*Made to fit over OEM Tank and perfect fitment with Carbonin Airbox cover
*Created for better braking ergonomics and mid turn handling.
*Keeps you from Sliding forward and also give something for your leg to hold onto in mid corner.
*3M Vinyl Tape Included for Installation

Description: "Replacement Tail unit
• Top
• Lower
• Left & Right Winglets"

This Requires the seat bracket for mounting IN1901Y . Seat units are optional

*you can use this tail on the 2015-2019 Yamaha YZF-R1, you will need to use the 2020 seat unit along with the seat bracket for fitment.

*You cannot use the OEM seat with this tail

Description: Carbonin Carbon Fiber Airbox Inlet Tube 2015-2024 Yamaha R1
*Requires ALU16001Y aluminum dashboard holder for proper fitment.

Description: Replacement Left side panel for oem radiator version race fairing only.
This is does not fit with oem bodywork

Description: Replacement Right side panel for oem radiator version race fairing only.
This is does not fit with oem bodywork

Description: Replacement winglet for carbonin tail unit Does not fit with oem bodywork

Description: Replacement Tail unit includes
• Top
• Lower
• Left & Right Winglets

This Requires the seat bracket for mounting IN1901Y . Seat units are optional

*you can use this tail on the 2015-2019 Yamaha YZF-R1, you will need to use the 2020 seat unit along with the seat bracket for fitment.

*You cannot use the OEM seat with this tail

Description: Carbonin Carbon Fiber Upper Race Fairing 2020 Yamaha YZF-R1
Comes with 6DZUS preinstalled
Does not fit with oem bodywork

Description: Extreme Components Instrument protection for Yamaha YZF R1 / R1M (2015/2020) (transparent blue) - CPSR1B

-Made In Italy
-Research and development takes place exclusively through collaboration with the best race teams engaged for years in the most prestigious national and world competitions; And only after specific tests, does Extreme Components start the production.

Description: Extreme Components Clutch control racing with GP EVO lever offset 34 mm - CFC34 This does not have a clutch switch so would need drilled and tapped if required for your model
-Made In Italy
-Research and development takes place exclusively through collaboration with the best race teams engaged for years in the most prestigious national and world competitions; And only after specific tests, does Extreme Components start the production.