HHR Performance - Air Filters

Engine Performance   - Air Filters
MWR and Sprint Air filters for Road and race motorcycles

Browse Air Filters Products

Sort
Clear Brand
View
 
Items 1-60 of 379
Description: Conical Filter P037 Water-Resistant Chrome End Cap Fits H-D Screamin' Eagle Kit 403520
Direct filter replacement for Harley-Davidson Screamin' Eagle Heavy Breather Performance Air Cleaner Single layer water-resistant polyester Special PTFE (Teflon) treatment creates a water-resistant barrier Innovative polyester material allows for consistent airflow Steel wire mesh with epoxy varnish finish Optimized filter surface area provides more airflow, more power and more filtration Increased air permeability and filtration efficiency when compared to cotton air filters Meets ISO 5011 Coarse Dust Test Requirements Airflow: 4,500 l/m2/sec. / Filtration: 37?m Can be cleaned using only compressed air Dry filter, no oil treatments required Direct OEM replacement 1 year warranty See technical tab for additional fitment listing
Item #: 403520
Condition: New
Price: $125.97

Qty:

Description: Conical Filter P037 Water-Resistant Off-Axis 50mm Center Flange (100mm L) 401921

Item #: 401921
Condition: New
Price: $73.97

Qty:

Description: Conical Filter P037 Water-Resistant Off-Axis 50mm Center Flange (50mm L) 401960

Item #: 401960
Condition: New
Price: $69.97

Qty:

Description: Conical Filter P037 Water-Resistant Off-Axis 50mm Left Flange Offset (100mm L) 401908

Item #: 401908
Condition: New
Price: $69.97

Qty:

Description: Conical Filter P037 Water-Resistant Off-Axis 50mm Left Flange Offset (50mm L) 401947

Item #: 401947
Condition: New
Price: $69.97

Qty:

Description: Conical Filter P037 Water-Resistant Off-Axis 50mm Right Flange Offset (100mm L) Fits Chimera Intake 401934

Item #: 401934
Condition: New
Price: $73.97

Qty:

Description: Conical Filter P037 Water-Resistant Off-Axis 50mm Right Flange Offset (50mm L) 401973

Item #: 401973
Condition: New
Price: $69.97

Qty:

Description: Conical Filter P037 Water-Resistant Off-Axis 55mm Center Flange (100mm L) 401999

Item #: 401999
Condition: New
Price: $69.97

Qty:

Description: Conical Filter P037 Water-Resistant Off-Axis 55mm Center Flange (50mm L) 402038

Item #: 402038
Condition: New
Price: $69.97

Qty:

Description: Conical Filter P037 Water-Resistant Off-Axis 55mm Left Flange Offset (100mm L) 401986

Item #: 401986
Condition: New
Price: $69.97

Qty:

Description: Conical Filter P037 Water-Resistant Off-Axis 55mm Left Flange Offset (50mm L) 402025

Item #: 402025
Condition: New
Price: $69.97

Qty:

Description: Conical Filter P037 Water-Resistant Off-Axis 55mm Right Flange Offset (100mm L) 402012

Item #: 402012
Condition: New
Price: $69.97

Qty:

Description: Conical Filter P037 Water-Resistant Off-Axis 55mm Right Flange Offset (50mm L) 402051

Item #: 402051
Condition: New
Price: $69.97

Qty:

Description: Conical Filter P037 Water-Resistant Universal 32mm ID (85mm L) 401687

Item #: 401687
Condition: New
Price: $62.97

Qty:

Description: Conical Filter P037 Water-Resistant Universal 41mm ID (76mm L) 401700

Item #: 401700
Condition: New
Price: $73.97

Qty:

Description: Conical Filter P037 Water-Resistant Universal 42mm ID (140mm L) 401713

Item #: 401713
Condition: New
Price: $73.97

Qty:

Description: Conical Filter P037 Water-Resistant Universal 42mm ID (85mm L) 401856

Item #: 401856
Condition: New
Price: $79.97

Qty:

Description: Conical Filter P037 Water-Resistant Universal 45mm ID (90mm L) 401674

Item #: 401674
Condition: New
Price: $73.97

Qty:

Description: Conical Filter P037 Water-Resistant Universal 50mm ID (150mm L) 401765

Item #: 401765
Condition: New
Price: $73.97

Qty:

Description: Conical Filter P037 Water-Resistant Universal 50mm ID (96mm L) 401726

Item #: 401726
Condition: New
Price: $73.97

Qty:

Description: Conical Filter P037 Water-Resistant Universal 52mm ID (118mm L) 401778

Item #: 401778
Condition: New
Price: $73.97

Qty:

Description: Conical Filter P037 Water-Resistant Universal 52mm ID (146mm L) 401791

Item #: 401791
Condition: New
Price: $73.97

Qty:

Description: Conical Filter P037 Water-Resistant Universal 52mm ID (171mm L) 401804

Item #: 401804
Condition: New
Price: $73.97

Qty:

Description: Conical Filter P037 Water-Resistant Universal 53mm ID (104mm L) 401869

Item #: 401869
Condition: New
Price: $79.97

Qty:

Description: Conical Filter P037 Water-Resistant Universal 60mm ID (104mm L) 401817

Item #: 401817
Condition: New
Price: $73.97

Qty:

Description: Conical Filter P037 Water-Resistant Universal 60mm ID (120mm L) 401739

Filter Dimensions:

Ø1 (mm) - 80

Ø2 (mm) - 60

Ø3 (mm) - 62

L1 (mm) - 100

L2 (mm) - 120

Item #: 401739
Condition: New
Price: $73.97

Qty:

Description: Conical Filter P037 Water-Resistant Universal 60mm ID (150mm L) 401830

Item #: 401830
Condition: New
Price: $73.97

Qty:

Description: Conical Filter P037 Water-Resistant Universal 62mm (170mm L) 403494

Item #: 403494
Condition: New
Price: $73.97

Qty:

Description: Conical Filter P037 Water-Resistant Universal 65mm ID (130mm L) 401752

Item #: 401752
Condition: New
Price: $73.97

Qty:

Description: Conical Filter P037 Water-Resistant Universal 70mm ID (100mm L) 401843

Item #: 401843
Condition: New
Price: $73.97

Qty:

Description: Conical Filter P08 F1-85 Off-Axis 50mm Right Flange Offset (100mm L) Fits Chimera Intake 402064

Item #: 402064
Condition: New
Price: $135.97

Qty:

Description: Conical Oriented Filter P037 Water-Resistant Universal 60mm ID (182mm L) 401882

Item #: 401882
Condition: New
Price: $73.97

Qty:

Description: Conical Oriented Filter P037 Water-Resistant Universal 65mm ID (182mm L) 401895

Item #: 401895
Condition: New
Price: $73.97

Qty:

Description:
 
Graves Motorsports Smog Block Off Plates for the Kawasaki model Sport Bikes listed below. Graves Motorsports Smog Block Off Plates are designed to seal off the ports on the valve cover used by the air injection system (a.k.a smog pumps or AIS). Sold in pairs This product is intended for closed course competition use only. Use of this product for any other purpose is strictly prohibited.

Fitment:
  • Kawasaki Fitment: ZX6R / ZX6RR 2003-2006 / ZX10R 2004-2012 / ZX14R 2006-2012 / EX300 2013-2014


The air induction system (AIS) burns unburned exhaust gases by injecting fresh air (secondary air) into the exhaust port, reducing the emission of hydrocarbons.

Once these are capped off the air injection system can be safely removed. These Smog Block Off Plates are made from CNC'ed billet aluminum and feature the Graves Motorsports "G" logo. There are three reasons why you want to remove the air injection system from your bike;

  • 1. If you are using your motorcycle on a closed course (racing, track days, etc.) you will want to remove all unnecessary equipment from your bike for reduced weight and ease of maintenance.
  • 2. To get an accurate Air:Fuel (A/F) ratio when dynoing the bike. The air injection system pumps fresh air directly into the exhaust stream in order to burn off any unused fuel. Unfortunately by doing this the A/F ratio is thrown off by the extra "fresh air" in the exhaust stream. By removing the air injection system you can achieve an accurate A/F ratio.
  • 3. This addition will typically remove the majority of popping on deceleration that can be experienced with un-burnt gasses within the emission charcoal chamber. Note: Proper tuning may be needed and this is general feedback.
Item #: AB018
Condition: New
Price: $36.95
Qty:

Description:
 
Graves Motorsports Smog Block Off Plates for BMW S1000rr model Sport Bikes. Graves Motorsports Smog Block Off Plates are designed to seal off the ports on the valve cover used by the air injection system (a.k.a smog pumps or AIS). Sold in pairs ( as pictured). This product is intended for closed course competition use only. Use of this product for any other purpose is strictly prohibited.

Fitment: BMW S1000rr 2010-2017 

The air induction system (AIS) burns unburned exhaust gases by injecting fresh air (secondary air) into the exhaust port, reducing the emission of hydrocarbons.

Once these are capped off the air injection system can be safely removed. These Smog Block Off Plates are made from CNC'ed billet aluminum and feature the Graves Motorsports "G" logo. There are three reasons why you want to remove the air injection system from your bike;

  • 1. If you are using your motorcycle on a closed course (racing, track days, etc.) you will want to remove all unnecessary equipment from your bike for reduced weight and ease of maintenance.

  • 2. To get an accurate Air:Fuel (A/F) ratio when dynoing the bike. The air injection system pumps fresh air directly into the exhaust stream in order to burn off any unused fuel. Unfortunately by doing this the A/F ratio is thrown off by the extra "fresh air" in the exhaust stream. By removing the air injection system you can achieve an accurate A/F ratio.

  • 3. This addition will typically remove the majority of popping on deceleration that can be experienced with un-burnt gasses within the emission charcoal chamber. Note: Proper tuning may be needed and this is general feedback.
Item #: AB016
Condition: New
Price: $36.95
Qty:

Description:
 
Graves Motorsports Smog Block Off Plates for Honda CBR model Sport Bikes. Graves Motorsports Smog Block Off Plates are designed to seal off the ports on the valve cover used by the air injection system (a.k.a smog pumps or AIS). Sold in pairs ( as pictured). This product is intended for closed course competition use only. Use of this product for any other purpose is strictly prohibited.

Fitment:
  • CBR600R F models (1999-2006)
  • CBR600RR (2003-2017)
  • CBR929RR (2000-2001)
  • CBR954RR (2002-2003)
  • CBR1000RR (2004-2017)
  • CB1000R (2011-2014)


The air induction system (AIS) burns unburned exhaust gases by injecting fresh air (secondary air) into the exhaust port, reducing the emission of hydrocarbons.

Once these are capped off the air injection system can be safely removed. These Smog Block Off Plates are made from CNC'ed billet aluminum and feature the Graves Motorsports "G" logo. There are three reasons why you want to remove the air injection system from your bike;

1. If you are using your motorcycle on a closed course (racing, track days, etc.) you will want to remove all unnecessary equipment from your bike for reduced weight and ease of maintenance.

2. To get an accurate Air:Fuel (A/F) ratio when dynoing the bike. The air injection system pumps fresh air directly into the exhaust stream in order to burn off any unused fuel. Unfortunately by doing this the A/F ratio is thrown off by the extra "fresh air" in the exhaust stream. By removing the air injection system you can achieve an accurate A/F ratio.

3. This addition will typically remove the majority of popping on deceleration that can be experienced with un-burnt gasses within the emission charcoal chamber. Note: Proper tuning may be needed and this is general feedback.

Item #: AB017
Condition: New
Price: $36.95
Qty:

Description: IAT Sensor Extension Harness for Honda Monkey 404955

Honda IAT Sensor Extension Harness - Honda Monkey 125

Item #: 404955
Condition: New
Price: $13.95
Qty:

Description: MWR 250ml Biodegradable Air Filter Cleaner MWR-006

Not a copy of the standard air filter, always searching for solutions, either it’s the performance , protection or fitment . Caution: clean and re-oil at least once a year with MWR air filter oil & cleaner . Remapping the ECU or the Fuel Control Module is recommended
Item #: MWR-006
Condition: New
Price: $13.95
Qty:

Description: MWR 250ml Biodegradable Air Filter Oil MWR-007

Not a copy of the standard air filter, always searching for solutions, either it’s the performance , protection or fitment . Caution: clean and re-oil at least once a year with MWR air filter oil & cleaner . Remapping the ECU or the Fuel Control Module is recommended
Item #: MWR-007
Condition: New
Price: $13.95
Qty:

Description: MWR Air Filter Adjustment Kit (HE & RACE ONLY) MWR-500

Not a copy of the standard air filter, always searching for solutions, either it’s the performance , protection or fitment . Caution: clean and re-oil at least once a year with MWR air filter oil & cleaner . Remapping the ECU or the Fuel Control Module is recommended
Item #: MWR-500
Condition: New
Price: $43.95
Qty:

Description: MWR Air Filter and Power Up Kit for the Ducati Scrambler 400 / 800 and Monster 797 MC-025-14

Not a copy of the standard air filter, always searching for solutions, either it’s the performance , protection or fitment . Caution: clean and re-oil at least once a year with MWR air filter oil & cleaner . Remapping the ECU or the Fuel Control Module is recommended
Item #: MC-025-14
Condition: New
Price: $85.95


Description: MWR Air Filter for Ducati 748 / 916 / 996 MC-020-94

Not a copy of the standard air filter, always searching for solutions, either it’s the performance , protection or fitment . Caution: clean and re-oil at least once a year with MWR air filter oil & cleaner . Remapping the ECU or the Fuel Control Module is recommended
Item #: MC-020-94
Condition: New
Price: $109.95

Qty:

Description: MWR Air Filter for Honda CBR250RR (2017+) MC-030-16

Not a copy of the standard air filter, always searching for solutions, either it’s the performance , protection or fitment . Caution: clean and re-oil at least once a year with MWR air filter oil & cleaner . Remapping the ECU or the Fuel Control Module is recommended
Item #: MC-030-16
Condition: New
Price: $95.95


Description: MWR Air Filter for Honda CBR500R, CB500X, & CB500F (2013+) MC-030-15

Not a copy of the standard air filter, always searching for solutions, either it’s the performance , protection or fitment . Caution: clean and re-oil at least once a year with MWR air filter oil & cleaner . Remapping the ECU or the Fuel Control Module is recommended
Item #: MC-030-15
Condition: New
Price: $95.95


Description: MWR Air Filter for Kawasaki Ninja 400 / Z400 / Ninja 250 / Z250 (2018+) MC-040-18

Not a copy of the standard air filter, always searching for solutions, either it’s the performance , protection or fitment . Caution: clean and re-oil at least once a year with MWR air filter oil & cleaner . Remapping the ECU or the Fuel Control Module is recommended
Item #: MC-040-18
Condition: New
Price: $90.95


Description: MWR Air Filter for Kawasaki Z H2 (2020+) MC-040-19

Not a copy of the standard air filter, always searching for solutions, either it’s the performance , protection or fitment . Caution: clean and re-oil at least once a year with MWR air filter oil & cleaner . Remapping the ECU or the Fuel Control Module is recommended
Item #: MC-040-19
Condition: New
Price: $119.95

Qty:

Description: MWR Air Filter for Kawasaki Z650, Ninja 650 and Vulcan 650 (2017+) MC-040-17

Not a copy of the standard air filter, always searching for solutions, either it’s the performance , protection or fitment . Caution: clean and re-oil at least once a year with MWR air filter oil & cleaner . Remapping the ECU or the Fuel Control Module is recommended
Item #: MC-040-17
Condition: New
Price: $104.95


Description: MWR Air Filter for Kawasaki Z750 (04-12), Z800 (13-16), & Z1000 (03-09) MC-040-01

Not a copy of the standard air filter, always searching for solutions, either it’s the performance , protection or fitment . Caution: clean and re-oil at least once a year with MWR air filter oil & cleaner . Remapping the ECU or the Fuel Control Module is recommended
Item #: MC-040-01
Condition: New
Price: $124.95

Qty:

Description: MWR Air Filter for Kawasaki Z900 (2017+) MC-040-14

Not a copy of the standard air filter, always searching for solutions, either it’s the performance , protection or fitment . Caution: clean and re-oil at least once a year with MWR air filter oil & cleaner . Remapping the ECU or the Fuel Control Module is recommended
Item #: MC-040-14
Condition: New
Price: $99.95

Qty:

Description: MWR Air Filter for Kawasaki Z900RS (2018+) MC-044-14

Not a copy of the standard air filter, always searching for solutions, either it’s the performance , protection or fitment . Caution: clean and re-oil at least once a year with MWR air filter oil & cleaner . Remapping the ECU or the Fuel Control Module is recommended
Item #: MC-044-14
Condition: New
Price: $104.95

Qty:

Description: MWR Air Filter for the Ducati 748R MC-020-95

Not a copy of the standard air filter, always searching for solutions, either it’s the performance , protection or fitment . Caution: clean and re-oil at least once a year with MWR air filter oil & cleaner . Remapping the ECU or the Fuel Control Module is recommended
Item #: MC-020-95
Condition: New
Price: $109.95

Qty:

Description: MWR Air Filter for the Ducati 848 / 1098 / 1198, Streetfighter, Multistrada 1200 (10-14) and Diavel (11-18) MC-020-07

Not a copy of the standard air filter, always searching for solutions, either it’s the performance , protection or fitment . Caution: clean and re-oil at least once a year with MWR air filter oil & cleaner . Remapping the ECU or the Fuel Control Module is recommended
Item #: MC-020-07
Condition: New
Price: $119.95

Qty:

Description: MWR Air Filter for the Ducati 996R/998 MC-020-98

Not a copy of the standard air filter, always searching for solutions, either it’s the performance , protection or fitment . Caution: clean and re-oil at least once a year with MWR air filter oil & cleaner . Remapping the ECU or the Fuel Control Module is recommended
Item #: MC-020-98
Condition: New
Price: $114.95

Qty:

Description: MWR Air Filter for the Ducati Desmosedici MC-020-10

Not a copy of the standard air filter, always searching for solutions, either it’s the performance , protection or fitment . Caution: clean and re-oil at least once a year with MWR air filter oil & cleaner . Remapping the ECU or the Fuel Control Module is recommended
Item #: MC-020-10
Condition: New
Price: $104.95

Qty:

Description: MWR Air Filter for the Ducati Hypermotard 1100 / 796 & Sport Classic MC-020-05

Not a copy of the standard air filter, always searching for solutions, either it’s the performance , protection or fitment . Caution: clean and re-oil at least once a year with MWR air filter oil & cleaner . Remapping the ECU or the Fuel Control Module is recommended
Item #: MC-020-05
Condition: New
Price: $114.95

Qty:

Description: MWR Air Filter for the Ducati Monster 1200/821 and Supersport MC-020-14

Not a copy of the standard air filter, always searching for solutions, either it’s the performance , protection or fitment . Caution: clean and re-oil at least once a year with MWR air filter oil & cleaner . Remapping the ECU or the Fuel Control Module is recommended
Item #: MC-020-14
Condition: New
Price: $124.95


Description: MWR Air Filter for the Moto Guzzi Norge/Breva/1100S MC-100-07

Not a copy of the standard air filter, always searching for solutions, either it’s the performance , protection or fitment . Caution: clean and re-oil at least once a year with MWR air filter oil & cleaner . Remapping the ECU or the Fuel Control Module is recommended
Item #: MC-100-07
Condition: New
Price: $84.95

Qty:

Description: MWR Air Filter for Triumph 765 Street Triple (2017+) and Daytona 765 / Moto2 MC-080-17

Not a copy of the standard air filter, always searching for solutions, either it’s the performance , protection or fitment . Caution: clean and re-oil at least once a year with MWR air filter oil & cleaner . Remapping the ECU or the Fuel Control Module is recommended
Item #: MC-080-17
Condition: New
Price: $84.95


Description: MWR Air Filter for Triumph Thruxton 1200 (2017+) MC-080-15-HE

Not a copy of the standard air filter, always searching for solutions, either it’s the performance , protection or fitment . Caution: clean and re-oil at least once a year with MWR air filter oil & cleaner . Remapping the ECU or the Fuel Control Module is recommended
Item #: MC-080-15-HE
Condition: New
Price: $71.95


Description: MWR Air Filter Kawasaki ZX-10R (2016+) MC-040-16-HE

Not a copy of the standard air filter, always searching for solutions, either it’s the performance , protection or fitment . Caution: clean and re-oil at least once a year with MWR air filter oil & cleaner . Remapping the ECU or the Fuel Control Module is recommended
Item #: MC-040-16-HE
Condition: New
Price: $94.95


Items 1-60 of 379