HHR Performance - Button Pods On/Off switches and Keyless delete kits

Hand & Foot Controls - Button Pods On/Off switches and Keyless delete kits
CNC billet Control pods to replace oem plastic housing

Browse Button Pods On/Off switches and Keyless delete kits Products

Sort
Clear Brand
View
 
Items 1-60 of 79
Description: Conversion kit handlebar switches alpha Racing EVO, for BMW S1000RR 2015-2018, "plug & play", replaces the left side switch by a 7 button racing unit in a new "EVO-shape", the right side switch by a racing unit with starter button and killswitch, mode selection will be switched to left side
Item #: 6131A095C00
Condition: New
Limited Supply: Only 1 Left!
Price: $644.37

Qty:

Description: Conversion kit switch gear EVO, for BMW S 1000 RR 2009-2014, switch units left & right, throttle housing Plug&Play, new ergonomic left side switch unit,
You Must Also Buy Alpha Racing Fast Throttle Kit 09-14 S1000RR 3271A004B0 If you would like to use the Throttle housing
Item #: 6131A090E00
Condition: New
Price: $532.38

Qty:

Description: Switch unit 7 buttons, left, EVO-Design, spare part for conversion kit switch gear aR EVO 2015-2018, for BMW S 1000 RR 2015-2019 US Spec, connection by alpha racing plugs to OEM loom
Item #: 6131A095C01
Condition: New
Price: $483.96

Qty:

Description: Switch unit right side for handle bar assembly to be used with E-throttle kit SBK, for M Race Calibration Kit only, "Kill", "Mode", "Start"
Item #: 6111B050A00
Condition: New
Price: $417.48

Qty:

Description: Switch unit right, for Conversion kit handlebar switches alpha Racing / EVO, BMW S1000RR 2015-2019 US spec, connection by Alpha Racing plugs to OEM loom, Nano plug
Item #: 6131A095A02
Condition: New
Price: $175.34

Qty:

Description: Five (5) button Left handle bar race switch for Yamaha R6 2017+ YEC KIT ECU
Item #: YR6KL5MTPL
Condition: New
Price: $341.00

Qty:

Description:
Ducati Panigale V4 V4R V4S Brake Master Cylinder Mounted Inline


Ideal for racing, to save space and weight where it matters. Mounts as a back bracket for your brake master cylinder for ultimate weight and space savings. Fits OEM, Brembo RCS, Brembo Corsa Corta master pumps.


This 3 button race switch takes care of ignition, starter and DPL ( Ducati Launch Control) Switch fits plug and play all Ducati Panigale V4 models
Main functions are, engine stop/run, starter and DPL (Launch Control)
Completely plug and play with connector. No splicing or soldering required. Installation is reversible in case you need to place the OEM switch back on the motorcycle

NOTE: available in brake master cylinder mounted hosings with offset bores part no: DUV4R3ELRCSO

Designed and CNC machined in United States from aircraft grade aluminum to be the smallest and lightest on the market.
Premium, military grade buttons with gold plated contact surfaces, manufactured in United States by Otto Excellence
Item #: DUVR3ELRCSI
Condition: New
Price: $215.00

Qty:

Description: The switch is a direct plug and play replacement for OEM right handlebar engine switch for latest generation Yamaha R6 (2017+) with YEC KIT ECU
Item #: YR617R3EMRCS
Condition: New
Price: $231.00

Qty:

Description:
2019+ Kawasaki ZX-6R 636


The switch is a direct plug and play replacement for OEM ignition switch for Kawasaki Ninja ZX-6R 2019+

Ideal for racing and street application, to save space and weight where it matters. mounts as a back bracket for your brake master cylinder. ( Offset mounting bores ).

A must have if you are upgrading to an RCS Brembo master brake cylinders. With aftermarket brake master cylinders there is not enough space on the handle bar for OEM ignition switch.

Designed for 22 mm standard clip on handle bars.

Main functions are ignition circuit activator / breaker and starter activation. Comes Plug and Play with OEM connector.

Designed and CNC machined in United States from aircraft grade aluminium to be the smallest and lightest on the market.

Premium buttons with gold plated contact surfaces, manufactured in United States by Otto Engineering
Item #: K619R2E
Condition: New
Price: $185.00

Qty:

Description:

 

Five (5) button Left handle bar race switch for Kawasaki ZX-6R 636 2019+ FLASH TUNE RACE PACKAGE
Part No: K619L5MLP
? Ideal for racing, to save space and weight where it matters. 
? Switch is designed to navigate your dash menu functions while omitting all street options (horn, turn signals, head lights). Switch fits plug and play all latest generation 2019+ Kawasaki ZX-6R models. 
? Switch is designed with Flash Tune race team package functions - allowing for controls of Pit speed limiter and Launch Control.

Note: Switch will work on OEM bike, however the Pit and Launch buttons will not be active. You will be able to control you menu navigation with UP, DWN and SELECT buttons.
? Main functions are select, quick change menu navigation UP/DWN, pit speed limiter  and Launch control. 
? Designed and CNC machined in United States from aircraft grade aluminum to be the smallest and lightest on the market.
? Premium military spec buttons with gold plated contact surfaces, manufactured in United States by Otto engineering.
? This switch will save you twice the space on the clip on occupied by OEM switch. Not to mention that WSBK cockpit look !

Item #: K619L5MLP
Condition: New
Price: $341.00

Qty:

Description: Four (4) button Left handle bar race switch for Kawasaki ZX-10R 2016+ OEM wiring
Item #: K619L4MLE
Condition: New
Price: $275.00

Qty:

Description: Titanium Brake Caliper Bolt Set M10x55
? Reduce unsprung mass by replacing OEM steel calliper bolts with our aircraft grade Titanium set. Four bolts per set.
? Switching to Titanium calliper bolts provides instant 45% weight savings and more than twice tensile strength
? Safety wire bores - 5 bores.
? Bolt particulars M10x1.25x55
? Set fits the following bikes and models:
1. Honda CBR 600RR (All Years)
2. Ducati Panigale 899 (All Years)
3. May fit other models with same bolt dimensions
Item #: TICM1055
Condition: New
Price: $52.00

Qty:

Description: Titanium Brake Caliper Bolt Set M10x60
? Reduce unsprung mass by replacing OEM steel calliper bolts with our aircraft grade Titanium set. Four bolts per set.
? Switching to Titanium calliper bolts provides instant 45% weight savings and more than twice tensile strength
? Safety wire bores - 5 bores.
? Bolt particulars M10x1.25x60
? Set fits the following bikes and models:
1. Kawasaki ZX-10R
2. Ducati Panigale 1199, 1299(All Years)
3. May fit other models with same bolt dimensions
Item #: TICM1060
Condition: New
Price: $65.00

Qty:

Description: Titanium Brake Caliper Bolt Set M10x70
? Reduce unsprung mass by replacing OEM steel calliper bolts with our aircraft grade Titanium set. Four bolts per set.
? Switching to Titanium calliper bolts provides instant 45% weight savings and more than twice tensile strength
? Safety wire bores - 5 bores.
? Bolt particulars M10x1.25x60
? Set fits the following bikes and models:
1. Kawasaki ZX-10R
2. Ducati Panigale 1199, 1299(All Years)
3. May fit other models with same bolt dimensions
Item #: TICM1070
Condition: New
Price: $75.00

Qty:

Description: Apex Racing Development designed this Switch as a direct plug and play replacement for left handlebar switch for latest generation 2017 Yamaha R6. Ideal for Racing application, to save space and weight where it matters. Switch functions: Traction Control Increase / Decrease while omitting all street functions.
Item #: YR617L2TC
Condition: New
Price: $198.00

Qty:

Description: Switch is designed to navigate your dash menu and auxiliary quick change functions, while omitting all street options. Replaces two OEM plastic switches with one aluminum housing. Switch fits plug and play 1299 and 1199R Panigale models with auxiliary quick change switch.
Item #: DUP12L5MEA
Condition: New
Price: $310.00

Qty:

Description: The switch is a direct plug and play replacement for OEM right handle bar switch for all Panigale models with Aux quick change switch, Superleggera, 2015 1199R, 1299S. Ideal for racing and street application, to save space and weight where it matters. This switch will allow you to get rid of the plastic OEM switch and retain all street functions. Your ride will remain street legal while gaining that GP racing cockpit look and superior crash resistance
Functions: engine start/stop, starter, high beam, lap/passing, horn.
Item #: DUP12SR5ELA
Condition: New
Price: $320.00

Qty:

Description: Five button billet aluminum race switch. Designed for 2016+ ZX-10R with KIT ECU. Supported functions: menu navigation, select, pit speed limiter, Lap Set. Switch will work with OEM harness however the pit speed button will not be utilised.
Item #: K1016KL5MELP
Condition: New
Price: $300.00

Qty:

Description: This switch is designed for 2015+ Yamaha R1 all models. Supported functions are: quick change menu navigation UP/DWN, select(mode)lap timer trigger and pit speed (for bikes equipped with flash tune). Designed for OEM ECU wiring with flash tune.
Item #: YR15FL5MELP
Condition: New
Price: $310.00

Qty:

Description: This switch is designed for 2015+ Yamaha R1 all models. Supported functions are: quick change menu navigation UP/DWN, select (mode),map and pit speed. Designed for YEC KIT ECU. Wiring for clutch sensor is not included.
Item #: YR15KL5MEPM
Condition: New
Price: $310.00

Qty:

Description: Switch is designed as a plug and play replacement for left hand switch for 2017 Yamaha R6 bikes equipped with Flash Tune race package. Switch fiunctions:Traction control+ / -, PIT limiter, Launch Control, Tail Light.
Item #: YR617FL5
Condition: New
Price: $310.00

Qty:

Description:
For Ymaha R1 (2015-2018)
This switch is designed for 2015+ Yamaha R1 all models. Supported functions are: engine start/stop and menu navigation UP/DWN and select. Switch replaces OEM plastic wheel navigation switch with button operated navigation. Will work with OEM and KIT ECU. Street and track. Five (5) button right handle bar ignition race switch for Yamaha R1 2015 + Part No: YR15R5EMS The switch is a direct plug and play replacement for OEM ignition switch for ALL new generation post 2015 Yamaha R1.
  • Ideal for racing and street application, to save space and weight where it matters. Can be used at the track and street.
  • This switch is unique to the market. It allows to replace plastic OEM engine and menu wheel control switch housing. There are no alternatives on the market. Our switch is the only plug and play replacement solution in this form and size factor.
  • Main functions are ignition start/stop,starter activation, menu up/down and select.
  • OEM menu scroll wheel is realised with push buttons. Each press provides one step up or down.
  • Designed and CNC machined in United States from aircraft grade aluminium to be the smallest and lightest on the market.
  • Premium buttons with gold plated contact surfaces, manufactured in United States by Otto Engineering
  • Designed for 22 mm standard clip on handle bars.
Item #: YR15R5EMS
Condition: New
Price: $325.00

Qty:

Description: Generic 4 button left handle bar button pod. Unengraved.
Item #: GENL4
Condition: New
Price: $270.00

Qty:

Description: Switch is designed to navigate your dash menu functions while omitting all street options. Switch fits plug and play all Panigale models including 1299 without quick change switch. Functions are menu navigation, select and manual or DDA lap trigger.
Item #: DUPL4MLE
Condition: New
Price: $270.00

Qty:

Description: Four button billet aluminum race switch. Designed for 2016+ ZX-10R with OEM ECU. Supported functions: menu navigation, select, pit speed limiter, Lap Set.
Item #: K1016L4MLE
Condition: New
Price: $270.00

Qty:

Description: This switch is designed for 2015+ Yamaha R1 all models. Supported functions are: quick change menu navigation, select and lap timer trigger. Designed for OEM ECU wiring.
Item #: YR15L4MLE
Condition: New
Price: $270.00

Qty:

Description: This switch is designed for all MV Augusta models 2012 onwards. Functions are Lap, Up(set), down(ok), Enter. Fits OEM and KIT wiring looms. Completely plug and play with OEM connectors. Clutch cable is internal and is always in engaged position.
Item #: MVFL4MLE
Condition: New
Price: $270.00

Qty:

Description: Switch is designed to navigate your dash menu functions while omitting all street options. Switch fits plug and play all 2017 Suzuki GSXR 1000 models.
Main functions are menu entry, menu navigation, menu choice selection and LAP trigger.
Item #: S117L4MLE
Condition: New
Price: $270.00

Qty:

Description: Generic five button motorcycle race switch. Comes wired but not terminated. Designed and manufactured in United States by Apex Racing Development. Machined from T6061 Aluminum.
Item #: GENL5B
Condition: New
Price: $280.00

Qty:

Apex Racing Development - Generic Five Button Motorcycle Race Switch RH
No Image Available
Description: Generic 5 button right handle bar button pod. Unengraved.
Item #: GENR5
Condition: New
Price: $280.00

Qty:

Description: Generic seven button motorcycle race switch. Comes wired but not terminated. Designed and manufactured in United States by Apex Racing Development. Machined from T6061 Aluminum.
Item #: GENL7B
Condition: New
Price: $340.00

Qty:

Description: Generic two button motorcycle race switch. Mounts as back bracket for brake master cylinder. Inline mounting bore. Comes wired but not terminated. Designed and manufactured in United States by Apex Racing Development. Machined from T6061 Aluminum.
Item #: GENR3BRCSI
Condition: New
Price: $200.00

Qty:

Description: Generic three button motorcycle race switch. Mounts as back bracket for brake master cylinder. 7mm offset mounting bore. Comes wired but not terminated. Designed and manufactured in United States by Apex Racing Development. Machined from T6061 Aluminum.
Item #: GENR3BRCSO
Condition: New
Price: $200.00

Qty:

Description: Generic three button motorcycle race switch. Comes wired but not terminated. Designed and manufactured in United States by Apex Racing Development. Machined from T6061 Aluminum.
Item #: GENR3B
Condition: New
Price: $195.00

Qty:

Apex Racing Development - Generic Two Button Motorcycle Switch (Brembo Mount Ionline) RH
No Image Available
Description: Generic two button motorcycle race switch. Mounts as back bracket for brake master cylinder. Inline mounting bore. Comes wired but not terminated. Designed and manufactured in United States by Apex Racing Development. Machined from T6061 Aluminum.
Item #: GENR2BRCSI
Condition: New
Price: $160.00

Qty:

Apex Racing Development - Generic Two Button Motorcycle Switch LH
No Image Available
Description: Generic two button motorcycle race switch. Comes wired but not terminated. Designed and manufactured in United States by Apex Racing Development. Machined from T6061 Aluminum.
Item #: GENL2B
Condition: New
Price: $155.00

Qty:

Description: Generic two button motorcycle race switch. Comes wired but not terminated. Designed and manufactured in United States by Apex Racing Development. Machined from T6061 Aluminum.
Item #: GENR2B
Condition: New
Price: $155.00

Qty:

Description: Generic two button motorcycle race switch. Self Wired . Mounts as back bracket for brake master cylinder. Comes wired but not terminated. Designed and manufactured in United States by Apex Racing Development. Machined from T6061 Aluminum.
Item #: GENR2BRCSO
Condition: New
Price: $179.00

Qty:

Description: This Motion Pro, Domino Made, Model specific handlebar switch for use with Rev2 throttle kit on bikes with ignition and starter switches in stock throttle assembly
Fits 7/8" bars (22.2 mm)
Item #: 11-0113
Condition: New
Price: $99.99

Qty:

Apex Racing Development - Seven Button Street LH Switch For Yamaha R1 (2015-2017)
No Image Available
Description: The switch is a direct plug and play replacement for OEM left handle bar switch for all 2015 + Yamaha R1 models
Ideal for racing and street application, to save space and weight where it matters. Functions - Horn, Turn signal left/right, High Beam, Enter/Select, Menu Up, Menu Down
Item #: YR15SL7
Condition: New
Price: $370.00

Qty:

Apex Racing Development - Seven Button Street Switch For Ducati Panigale
No Image Available
Description: The switch is a direct plug and play replacement for OEM left handle bar switch for all Panigale models with Aux quick change switch, Superleggera, 2015 1199R, 1299S, etc. Ideal for racing and street application, to save space and weight where it matters. This switch will allow you to get rid of the two plastic OEM switch and retain all street functions. Your ride will remain street legal while gaining that GP racing cockpit look! Functions - Aux+,Aux-, Turn signal left/right, Enter/Select, Menu Up, Menu Down/menu enter.
Item #: DUP12SL7S
Condition: New
Price: $370.00

Qty:

Description: The switch is a direct plug and play replacement for OEM left handle bar switch for all Panigale models, new Monsters, Hypermotards, will work with most post 2013 Ducati models.
Ideal for racing and street application, to save space and weight where it matters. Functions - Horn, Turn signal left/right, High Beam, Enter/Select, Menu Up, Menu Down/menu enter (3 sec hold).
Item #: DUPSL7
Condition: New
Price: $370.00

Qty:

Description: The Speedcell Key Delete Master Arm is designed for racers and track day enthusiast’s; our Key Delete replaces your OEM key assembly and fits into the ignition provision on OEM triple clamps
Elimination of battery over discharge due to leaving the bike in the “Run” position
Elimination of battery over discharge due to leaving the bike in the “Run” position
Master Arm circuit isolation allows for the immediate disconnect from power in the event of an emergency
All Speedcell Key Delete Master Arm’s come standard with an ALL weather Military grade toggle switch - MIL-DTL-3950 rating
Item #: ZX10R15+
Condition: New
Limited Supply: Only 1 Left!
Price: $89.00

Qty:

Description: The Speedcell Key Delete Master Arm is designed for racers and track day enthusiast’s; our Key Delete replaces your OEM key assembly and fits into the ignition provision on OEM triple clamps
Elimination of battery over discharge due to leaving the bike in the “Run” position
Elimination of battery over discharge due to leaving the bike in the “Run” position
Master Arm circuit isolation allows for the immediate disconnect from power in the event of an emergency
All Speedcell Key Delete Master Arm’s come standard with an ALL weather Military grade toggle switch - MIL-DTL-3950 rating
Item #: R3
Condition: New
Limited Supply: Only 1 Left!
Price: $89.00

Qty:

Description:
(Brembo Mount Inline)



This 3 button race switch takes care of ignition, starter and LAP /DDA trigger. Switch fits plug and play 1299 & 1199 R Panigale models with auxiliary quick switch. Main functions are, engine stop/run, starter and LAP/DDA trigger. Mounts as back bracket to Brembo and OEM brake master cylinder. Inline fasteners bore.

? The switch is a direct plug and play replacement for OEM ignition switch for all Panigale models with auxiliary quick change (paddle) switch.
? Ideal for racing and street application, to save space and weight where it matters. This model takes weight savings to another level - only 45 grams!!! Switch is acting as a back mounting bracket for your front brake master cylinder.
? Fits OEM and Brembo RCS master cylinders. Note !!! - Inline fasteners bore.
? Designed for 22 mm standard clip on handle bars.
? Switch functions: engine run/stop (maintained red) and starter activation (momentary black, LAP/Passing (momentary blue).
? Note !!! - To be used with a 5 button left switch Part No.DUP12L5ME+-
? Designed and CNC machined in United States from aircraft grade aluminum to be the smallest and lightest on the market.
? Premium, military grade buttons with gold plated contact surfaces, manufactured in United States by Otto.
? Plug and play with OEM connector.
Item #: DUP12R3ELRCSI
Condition: New
Price: $210.00

Qty:

Description: This 3 button race switch takes care of ignition, starter and LAP /DDA trigger. Switch fits plug and play 1299 and 1199 R Panigale models with auxiliary quick change switch. Main functions are, engine stop/run, starter and LAP/DDA trigger.IMPORTANT switch is to be used in conjunction with the Left hand 5 button switch for 1299 DUP12LH5BM/E+/-.
Item #: DUP12R3EL
Condition: New
Price: $205.00

Qty:

Description:
(Brembo Mount Offset)



This 3 button race switch takes care of ignition, starter and LAP /DDA trigger. Switch fits plug and play 1299 & 1199 R Panigale models with auxiliary quick switch. Main functions are, engine stop/run, starter and LAP/DDA trigger. Mounts as back bracket to Brembo and OEM brake master cylinder. 7mm offset fasteners bore.

? The switch is a direct plug and play replacement for OEM ignition switch for all Ducati Superbike ÿmodels with trellis frame 848, 1098, 1198, Streetfighter, old monsters.
? Ideal for racing and street application, to save space and weight where it matters. This model takes weight savings to another level - only 40 grams!!! Switch is acting as a back mounting bracket for your front brake master cylinder.
? Fits OEM and Brembo RCS master cylinders. Note !!! - 7 mm offset for fasteners bore.
? Designed for 22 mm standard clip on handle bars.
? Switch functions: engine run/stop (maintained red) and starter activation (momentary black.
? Designed and CNC machined in United States from aircraft grade aluminum to be the smallest and lightest on the market.
? Premium, military grade buttons with gold plated contact surfaces, manufactured in United States by Otto.
? Switch functions: engine run/stop (maintained red) and starter activation (momentary black.
? Plug and play with OEM connector.
Item #: DUP12R3ELRCSO
Condition: New
Price: $210.00

Qty:

Description: Switch is designed as a direct plug and play replacement for latest generation 2017 Yamaha R6. Ideal for Racing and Street application, to save space and weight where it matters. Switch functions: Engine Start/Stop, Starter and engine mode (MAP).
Item #: YR617R3EM
Condition: New
Price: $205.00

Qty:

Description: Switch is designed as a direct plug and play replacement for latest generation 2017 Yamaha R6. Ideal for Racing and Street application, to save space and weight where it matters. Mounts as a back bracket for brake master cylinder (inline). Switch functions: Engine Start/Stop, Starter and engine mode (MAP).
Item #: YR617R3EMRCSI
Condition: New
Price: $210.00

Qty:

Description: Switch is designed as a direct plug and play replacement for latest generation 2017 Yamaha R6. Ideal for Racing and Street application, to save space and weight where it matters. Mounts as a back bracket for brake master cylinder (7mmoffset). Switch functions: Engine Start/Stop, Starter and engine mode (MAP).
Item #: YR617R3EMRCSO
Condition: New
Price: $210.00

Qty:

Description:
With Auxiliary Function (Brembo Mount Inline)



The switch is a direct plug and play replacement for OEM ignition switch. Utimate weight savings - mounts as a back bracket for brake maaster cylinder (inline mounting bore). Main functions are ignition circuit activator / breaker and starter activation. Third button can be used for auxiliary functions such as lap timers, tail light or ignition power. Connector is compatible with F3 and F4

? The switch is a direct plug and play replacement for OEM ignition switch for MV AGUSTA F3, F4, BRUTALE (2011 onwards).
? Provides unparalleled weight and space savings. Only 40 grams. Mounts as a back bracket for brake master cylinder.
? Inline mounting bore.
? For LAP function please see our 3 button model.
? Ideal for racing and street application, to save space and weight where it matters.
? A must have if you are upgrading to an RCS Brembo master brake cylinders.
? Designed for 22 mm standard clip on handle bars.
? Main functions are ignition circuit activator / breaker and starter activation.
? Designed and CNC machined in United States from aircraft grade aluminium to be the smallest and lightest on the market.
? Premium military spec buttons with gold plated contact surfaces, manufactured in United States by Otto Engineering
Item #: MVR3ELRCSI
Condition: New
Price: $210.00

Qty:

Description:
With Auxiliary Function (Brembo Mount Offset)



The switch is a direct plug and play replacement for OEM ignition switch. ltimate weight savings - mounts as a back bracket for brake maaster cylinder (offset mounting bore). Main functions are ignition circuit activator / breaker and starter activation. Third button can be used for auxiliary functions such as lap timers, tail light or ignition power. Connector is compatible with F3 and F4

? The switch is a direct plug and play replacement for OEM ignition switch for MV AGUSTA F3, F4, BRUTALE (2011 onwards).
? Provides unparalleled weight and space savings. Only 40 grams. Mounts as a back bracket for brake master cylinder.
? Offset mounting bore (7mm)
? Main functions are ignition circuit activator / breaker and starter activation.
? Third button can be used for auxiliary function such as Lap, Tail light or ignition power.
? Ideal for racing and street application, to save space and weight where it matters.
? A must have if you are upgrading to an RCS Brembo master brake cylinders.
? Designed for 22 mm standard clip on handle bars.
? Designed and CNC machined in United States from aircraft grade aluminium to be the smallest and lightest on the market.
? Premium military spec buttons with gold plated contact surfaces, manufactured in United States by Otto Engineering
Item #: MVR3ELRCSO
Condition: New
Price: $210.00

Qty:

Description:
With Auxiliary Function



The switch is a direct plug and play replacement for OEM ignition switch. Main functions are ignition circuit activator / breaker and starter activation. Third button can be used for auxiliary functions such as lap timers, tail light or ignition power. Connector is compatible with F3 and F4

? The switch is a direct plug and play replacement for OEM ignition switch for MV AGUSTA F3, F4, BRUTALE
? Ideal for racing and street application, to save space and weight where it matters.
? A must have if you are upgrading to an RCS Brembo master brake cylinders. With aftermarket brake master cylinders there is not enough space on the handle bar for OEM ignition switch.
? Designed for 22 mm standard clip on handle bars.
? Main functions are ignition circuit activator / breaker and starter activation. Third button can be used for auxiliary function such as lap timer, tail light or ignition power (incase bike is equipped with ignition key bypass)
? Designed and CNC machined in United States from aircraft grade aluminium to be the smallest and lightest on the market.
? Premium military spec buttons with gold plated contact surfaces, manufactured in United States by Otto Engineering
? Available in housing that mounts as back bracket for brake master cylinder.
Item #: MVR3EL
Condition: New
Price: $170.00

Qty:

Description:
Function For Suzuki Gsxr 1000 2017+ (Brembo Mount Inline)



Three button billet aluminum race switch. Ultimate weight savings - mounts as a back bracket for brake maaster cylinder (inline mounting bore).This switch is designed for 2017 Suzuki GSXR 1000. Provides engine start and stop functions.Third button can be used for auxiliary functions such as lap timer, tail light or ignition power.

? The switch is a direct plug and play replacement for OEM ignition switch for Kawasaki Ninja ZX-10R 2011-2016 and 636
? Provides unparalleled weight and space savings. Only 40 grams. Mounts as a back bracket for brake master cylinder, inline mounting bore.
? Compatible with KIT and OEM ECU. For LAP function please see our 3 button model.
? Ideal for racing and street application, to save space and weight where it matters.
? A must have if you are upgrading to an RCS Brembo master brake cylinders.
? Designed for 22 mm standard clip on handle bars.
? Main functions are ignition circuit activator / breaker and starter activation.
? Designed and CNC machined in United States from aircraft grade aluminium to be the smallest and lightest on the market.
? Premium military spec buttons with gold plated contact surfaces, manufactured in United States by Otto Engineering
Item #: S117R3ELRCSI
Condition: New
Price: $210.00

Qty:

Description:
Function For Suzuki Gsxr 1000 2017+



The switch is a direct plug and play replacement for OEM ignition switch for all 2017 GSXR 1000 models. Main functions are ignition circuit activator / breaker and starter activation. Third button can be used for auxiliary functions such as Lap timer or Tail light.

? The switch is a direct plug and play replacement for OEM ignition switch for 2017 Suzuki GSXR 1000
? Ideal for racing and street application, to save space and weight where it matters.
? A must have if you are upgrading to an RCS Brembo master brake cylinders. With aftermarket brake master cylinders there is not enough space on the handle bar for OEM ignition switch.
? Designed for 22 mm standard clip on handle bars.
? Main functions are ignition circuit activator / breaker and starter activation. Third button can be used for auxiliary function such as lap timer, tail light or ignition power (incase bike is equipped with ignition key bypass)
? Designed and CNC machined in United States from aircraft grade aluminium to be the smallest and lightest on the market.
? Premium military spec buttons with gold plated contact surfaces, manufactured in United States by Otto Engineering
? Available in housing that mounts as back bracket for brake master cylinder.
Item #: S117R3EL
Condition: New
Price: $205.00

Qty:

Description:
Function For Suzuki Gsxr 1000 2017+ (Brembo Mount Offset)



Three button billet aluminum race switch. Ultimate weight savings - mounts as a back bracket for brake maaster cylinder (offset mounting bore).This switch is designed for 2017 Suzuki GSXR 1000. Provides engine start and stop functions.Third button can be used for auxiliary functions such as lap timer, tail light or ignition power.

? The switch is a direct plug and play replacement for OEM ignition switch for 2017 Suzuki GSXR 1000
? Provides unparalleled weight and space savings. Only 40 grams. Mounts as a back bracket for brake master cylinder.
? Offset mounting bore (7mm)
? Main functions are ignition circuit activator / breaker and starter activation.
? Third button can be used for auxiliary function such as Lap, Tail light or ignition power.
? Ideal for racing and street application, to save space and weight where it matters.
? A must have if you are upgrading to an RCS Brembo master brake cylinders.
? Designed for 22 mm standard clip on handle bars.
? Designed and CNC machined in United States from aircraft grade aluminium to be the smallest and lightest on the market.
? Premium military spec buttons with gold plated contact surfaces, manufactured in United States by Otto Engineering
Item #: S117R3ELRCSO
Condition: New
Price: $210.00

Qty:

Description:
(Brembo Mount Offset)



The switch is a direct plug and play replacement for OEM ignition switch. Utimate weight savings - mounts as a back bracket for brake maaster cylinder (7mm offset mounting bore). Main functions are ignition circuit activator / breaker and starter activation. Third button can be used for auxiliary functions such as lap timers, tail light or ignition power. Connector is compatible with all trellis framed Ducati Superbike models (pre 2014).

? The switch is a direct plug and play replacement for OEM ignition switch for all Panigale models with auxiliary quick change (paddle) switch.
? Ideal for racing and street application, to save space and weight where it matters. This model takes weight savings to another level - only 45 grams!!! Switch is acting as a back mounting bracket for your front brake master cylinder.
? Fits OEM and Brembo RCS master cylinders. Note !!! - 7 mm offset fasteners bore.
? Designed for 22 mm standard clip on handle bars.
? Switch functions: engine run/stop (maintained red) and starter activation (momentary black, third button can be used for auxiliary functions such as rain light, engine mapping, lap timer, etc. Third button can be supplied either momentary or maintained. (Contact us).
? Designed and CNC machined in United States from aircraft grade aluminum to be the smallest and lightest on the market.
? Premium, military grade buttons with gold plated contact surfaces, manufactured in United States by Otto.
? Plug and play with OEM connector.
Item #: DUx8R3ELRCSO
Condition: New
Price: $210.00

Qty:

Description:
(Brembo Mount Inline)


The switch is a direct plug and play replacement for OEM ignition switch. Utimate weight savings - mounts as a back bracket for brake master cylinder (inline mounting bore). Main functions are ignition circuit activator / breaker and starter activation. Third button can be used for auxiliary functions such as lap timers, tail light or ignition power. Connector is compatible with all trellis framed Ducati Superbike models (pre 2014).

Assist cargo operation , Gangway watch and deck patrol watches
Item #: DUx8R3ELRCSI
Condition: New
Price: $210.00

Qty:

Description: This switch is compatible with all 2016+ ZX-10R models. Switch will work with KIT and OEM ECU and wiring harness. Switch controls engine start and stop plus in case of KIT ECU it control part of the launch control sequence. Switch will work with previous pre 2016 models but the launch button will not be utilised.
Item #: K1016R3EL
Condition: New
Price: $205.00

Qty:

Description: Three button billet aluminum engine & lap switch. Ultimate weight savings - mounts as a back bracket for brake maaster cylinder (7mm offset mounting bore). This switch is compatible with all 2016+ ZX-10R models. Switch will work with KIT and OEM ECU and wiring harness. Compatible with previous pre 2016 models but the launch button will not be utilised.
Item #: K1016R3ELRCSO
Condition: New
Price: $210.00

Qty:

Items 1-60 of 79


More About Button Pods On/Off switches and Keyless delete kits

We carry a variety of key delete kits , On off switches and Button pods which are common parts to change on any track bike. Not using a key to start your bike means you don't have to remember to bring it! Button pods are built to withstand crashes and some throttles incorporate the Run/Kill switch into the throttle so they are needed when switching out to a quick turn throttle kit