HHR Performance - FTECU

Browse FTECU Products

Sort
Clear Brand
View
 
Items 1-17 of 17
Description: Flash Tune Shift Rod - BUILD Kits. The FTEcu Shift Rods are designed for certain Quick Shifters and work only for specific bike models and setups. As a result, not all bike models require the purchase of a Shift Rod Kit.

How to Find your Bike's Shift Rod/s on this Site:

To determine whether or not your motorcycle requires a shift rod kit, please refer to the information below (NOTE: You can also use these shift rod build kits for universal applications). The chart below outlines what type of Dynojet Quick Shifter your bike uses and what shift rods will be needed with the stock rearsets and the standard shift patter. For racing shift patterns (reverse shifting), you will need to determine if you are pushing or pulling the shift rod end points so you will select the correct setup. If you have any questions do not hesitate to contact the Sport Bike experts at Graves Motorsports.

Models Using the PC5 require the use of the QEM add-on unit.
Item #: SHIFTROD
Condition: New
Price: $15.95

Description:

Bench Tuning Kit : Flash Tune Data-Link ECU Flashing Kits : Your bike already has a standalone ECU and now you can get the tools to program it! There is no longer any need to send away your ECU! See bike fitments for the different types of setups below -Thank you. Scroll down for in-depth kit information. 

Fitment: 

  • Yamaha R1 2007-2008 (BENCH KIT)
  • Yamaha R6 2008-2016 (BENCH KIT)
  • VMax 2009-2011 (BENCH KIT ONLY)



This Interface allows you to easily adjust the following! 

  • Remove ECU Restrictions
  • Engine Braking adjustments
  • High Load Fuel Maps (with PC3 and PC5 map importing)
  • Low Load (cruising) Fuel Maps
  • Fuel Injector Proportioning
  • Ignition Timing
  • Immobilizer Function
  • Cooling Fan Temps
  • Rev-Limiter Control
  • Remove Top Speed Limiter
  • ECU Based Quick-shifting
  • Speedometer calibrations
  • and new features are added regularly.



Bench ECU Flashing Kit Includes: 

  • FTdataLink ECU Interface USB Cable
  • Bench Flashing Harness to flash your ECU outside of the bike
  • Power Supply for Bench flashing



We believe everyone deserves the same tuning technology that until now was reserved for factory riders. With our software you can remove the restrictions that the factory must put in place to meet strict street vehicle guidelines. By flashing your ECU you are able to tune your bike without interfering with critical correction factors resulting in smoother power gains than ever before possible.This product is for RACE USE ONLY! The included software will automatically update as new features are added!

Item #: FT-BNKT1
Condition: New
Price: $450.00

Qty:

Description:

Flash Tune Data-Link ECU Flashing Kits : Your bike already has a standalone ECU and now you can get the tools to program it! There is no longer any need to send away your ECU! Note: The "Bench" kit listed here and separate listed "Bike Side" do the exact same thing. The bike side kits permanently mounts a small harness to the side of the bike and the bench kits requires removing the ecu and tuning at the computer. Scroll down for in-depth kit information. 

Fitment: 

  • Yamaha R1 2009-2014



This Interface allows you to easily adjust the following! 

  • Remove ECU Restrictions
  • Engine Braking adjustments
  • High Load Fuel Maps (with PC3 and PC5 map importing)
  • Low Load (cruising) Fuel Maps
  • Fuel Injector Proportioning
  • Ignition Timing
  • Immobilizer Function
  • Cooling Fan Temps
  • Rev-Limiter Control
  • Remove Top Speed Limiter
  • ECU Based Quick-shifting
  • Speedometer calibrations
  • and new features are added regularly.



Bench ECU Flashing Kit Includes: 

  • FTdataLink ECU Interface USB Cable
  • Bench Flashing Harness to flash your ECU outside of the bike
  • Power Supply for Bench flashing



We believe everyone deserves the same tuning technology that until now was reserved for factory riders. With our software you can remove the restrictions that the factory must put in place to meet strict street vehicle guidelines. By flashing your ECU you are able to tune your bike without interfering with critical correction factors resulting in smoother power gains than ever before possible.This product is for RACE USE ONLY! The included software will automatically update as new features are added!

Item #: FT-BNKT2
Condition: New
Price: $450.00

Qty:

Description:
 
Flash Tune Data-Link (Bike side) ECU Flashing Kits for the 2017 CBR1000rr : Your bike already has a standalone ECU and now you can get the tools to program it! There is no longer any need to send away your ECU! Note: Bike side and the separate listing bench tuning kit do the same thing but, the bike side kit mounts a small harness to the bike permanently to access tuning. Bench kits tune by removing the ECU from the bike and connecting it to a computer Scroll down for in depth kit information.

Fitment:
  • Honda CBR1000rr 2017

This Interface allows you to easily adjust the following! 
  • Remove ECU Restrictions
  • High Load Fuel Maps
  • Low Load (cruising) Fuel Maps and Bias Mapping
  • Cylinder Specific Ignition Timing by Gear
  • Throttle by Wire Adjustments
  • See screen shot for list of current features
Data-Link ECU Flashing Bike Side Kit Includes:
  • FTdata Link ECU Interface USB Cable
  • Bike-side programming harness to permanently install on your bike
  • FT ECU License to allow unlimited flashes for a single ecu

We believe everyone deserves the same tuning technology that until now was reserved for factory riders. With the FTEcu software you can remove the restrictions that the factory must put in place to meet strict street vehicle guidelines. By flashing your ECU you are able to tune your bike without interfering with critical correction factors resulting in smoother power gains than ever before possible.This product is for RACE USE ONLY! The included software will automatically update as new features are added!
 
Item #: FT-4P_FTDL_05
Condition: New
Price: $380.00

Qty:

Description:
 
FTEcu Yamaha R1 15-16 / R1M 15-16 / R1S 2016 (WILL NOT FIT THE 2017 see separate listing) ECU Based Auto-Blipper Kit. Works great with the "GravesSpec" FTEcu map and when activated allows for smooth downshifting without using the clutch!

With this kit and your flashed ECU you can downshift smoother than would otherwise be possible without pulling the clutch! The latest generation of R1 models is finally capable of producing smooth fast clutch-less downshifting! After three years of development we are proud to release the best auto-blipper available.

This system provides smoother clutch-less downshifting that rivals even the OEM’s like BMW and Ducati

This kit requires:
  • FTECU Flashing Kit and licensed ECU or the purchase of a mail-in ECU flashing service


This kit includes:
  • 1 Push Type QSS/Blip Shift Sensor
  • 1 Pull Type QSS/Blip Shift Sensor
  • The two sensors together will replace your OEM pull type sensor
  • QSS/Blipper Harness to connect your new sensors to your ECU (Select Stock or Kit Harness from the pull down menu).
  • Scratch-off Activation Card to authorize the auto-blipper to be used with your tuning license.


Fitment: Yamaha R1 2015-2016 / R1M 2015-2016 / R1S 2016 (WILL NOT FIT THE 2017 see separate listing)
Item #: FT-FTEJ-AB
Condition: New
Price: $400.00

Qty:

Description:

FTECU’s Kawasaki Ninja 400 + Ninja 650 + Z900 ABS Delete allows you to completely remove the factory ABS system without triggering error codes on your bike’s dashboard.

For off-road track use ONLY!


This unit allows you to remove the ABS pump assembly and save much-needed weight for race applications where the ABS is not needed. Weight reduction is slightly more than three pounds (aftermarket brake lines not included).

Fitment: Kawasaki Ninja 400 2018-2019 + Ninja 650 2018-2019 + Z900 2017-2019

Item #: FTKAW_ABS_DEL_2
Condition: New
Price: $249.00

Qty:

Description: FTECU’s Kawasaki ZX-6R / ZX-10R / H2 ABS Delete allows you to completely remove the factory ABS system without triggering error codes on your bike’s dashboard.

For off-road track use ONLY!


This unit allows you to remove the ABS pump assembly and save much-needed weight for race applications where the ABS is not needed. Weight reduction is slightly more than three pounds (aftermarket brake lines not included).

Fitment: Kawasaki ZX-6R 2019 + ZX-10R 2016-2019 + Kawasaki HZ 2016 +
Item #: FTKAW_ABS_DEL_1
Condition: New
Price: $249.00

Qty:

Description: FTECU Based Quick Shifter Replacement Sensor. The Flash Tune long awaited PUSH/PULL type sensor is now available!
This sensor works in PUSH/PULL (for quickshift configuration for GP or Standard Shift Pattern). This sensor also works in PUSH/PULL (for autoblip configuration for GP or Standard Shift Pattern) Manufactured by us here in the USA.

Note: Shift Sensor Connector with Red wire is for PUSH switch
Note: Shift Sensor Connector with Black wire is for PULL switch
This Sensor requires rods and a harness to be used on a bike. You will also need an FTEcu flash tune kit to active the shifting all sold separately.
Item #: FTE_QS2
Condition: New
Price: $220.00

Qty:

Description:
 
FTEcu R1 / FZ10 / MT-10 R6 - (6-pin) Replacement Bike Harnesses for use with Denso FT Datalink USB cables. Great for customers with a bike tuning kit wanting to upgrade to bike side access or when having multiple bikes. 

Fitment:

  • Yamaha R1 2015-2018 / R1M 2015-2018 / R1S 2016-2018 / Yamaha FZ10 2017 / R6 2017-2018 / MT-10 2018


Item #: FT-BSHA08
Condition: New
Price: $49.95
Qty:

Description:
 
FTEcu 2017 Yamaha R6 ABS Delete Plug now allows you remove the factory ABS system completely without error codes on your R6's dashboard. For off-road track use ONLY! This fuse plug will allow you to remove the ABS pump assembly while saving much needed weight for race applications when the ABS is not needed. Weight reduction is slightly over 3 lbs. saving (aftermarket brake lines not included). 

Fitment:

  • Yamaha R6 2017
Item #: FT-YAM_R6_ABS
Condition: New
Price: $250.00

Qty:

Description:
 
Flash Tune Data-Link ECU Flashing Kits : Your bike already has a standalone ECU and now you can get the tools to program it! There is no longer any need to send away your ECU! Note: This "Bike Side" kit listed here and separate listing for the "Bench Kit" do the exact same thing. The bike side kits permanently mounts a small harness to the side of the bike and the bench kits require removing the ecu and tune at the computer. Scroll down for in-depth kit information.

Fitment:

  • Yamaha R1 2009-2014


This Interface allows you to easily adjust the following!

  • Remove ECU Restrictions
  • Engine Braking adjustments
  • High Load Fuel Maps (with PC3 and PC5 map importing)
  • Low Load (cruising) Fuel Maps
  • Fuel Injector Proportioning
  • Ignition Timing
  • Immobilizer Function
  • Cooling Fan Temps
  • Rev-Limiter Control
  • Remove Top Speed Limiter
  • ECU Based Quick-shifting
  • Speedometer calibrations
  • and new features are added regularly


Bench ECU Flashing Kit Includes:
  • FTdataLink ECU Interface USB Cable
  • Bench Flashing Harness to flash your ECU outside of the bike
  • Power Supply for Bench flashing


We believe everyone deserves the same tuning technology that until now was reserved for factory riders. With our software you can remove the restrictions that the factory must put in place to meet strict street vehicle guidelines. By flashing your ECU you are able to tune your bike without interfering with critical correction factors resulting in smoother power gains than ever before possible.This product is for RACE USE ONLY! The included software will automatically update as new features are added!
Item #: FT-FTDL2
Condition: New
Price: $380.00

Qty:

Description: Flash Tune Data-Link : (Bike side) ECU Flashing Kits for the 2017-2018 Yamaha R6 / 2015-2018 Yamaha R1 / R1M / R1S + 2017 Yamaha FZ10 + 2018 MT-10 . Your bike already has a standalone ECU and now you can get the tools to program it! There is no longer any need to send away your ECU! Note: Bike side and the separate listing bench tuning kit do the same thing but one tunes off the bike and the other attaches to the bike. Scroll down for in-depth kit information.

This Interface allows you to easily adjust the following!

Remove ECU Restrictions

High Load Fuel Maps (with PC5 map importing)
Low Load (cruising) Fuel Maps and Bias Mapping
Fuel Injector Proportioning
Engine Braking adjustments
Cylinder Specific Ignition Timing
Variable Stack RPM Adjustment
Cooling Fan Temp Adjustment
Remove Top Speed Limiter
Steering Damper Elimination
EXUP Valve Elimination
Force AIS Valve Closed
*This kit is also compatible with the R1M and R1S.
Item #: FT-FTDL8
Condition: New
Price: $380.00

Qty:

Description:
 
FTEcu Yamaha Active Tune AFR Self Tuning ECU Kit. This Kit lets your FTECU equipped bike tune itself as you ride! Once installed and activated, the ActiveTune kit monitors the fuel mixture making fast and consistent changes to mitigate changing fuel requirements.

This breakthrough system replaces your inadequate stock O2 sensor with a proprietary FTECU lambda controller and the latest generation Bosch LSU 4.9 sensor.

This kit requires:

  • Data-Link ECU Flashing Kit ( bike harness required for tuning / data acquisition )
  • Exhaust with a standard 18×1.5 O2 sensor bung (optionally cylinder specific bungs)
  • Smog block-offs or disabled AIS valve (Graves Smog Block Off Part Numbers : R1 / FZ10 (all) /R6 (2017) = AB011 / FZ09 + XSR900 = AB015 / FZ07 (N/A) / MT07 (N/A) / XSR700 (N/A)


FTEcu Yamaha Active Tune


This kit includes:

  • 1 FTECU YAM-01 Lambda Controller
  • 1 Bosch LSU4.9 wideband O2 sensor
  • 1 Product Activation Card


Model Fitment:

  • Yamaha R1 / R1M / R1S 2015-2018 Note: You will need an 18x1.5mm Lamda Collar in your R1 exhaust for this installation this does not come on the stock exhausts but standard on Graves Cat Eliminator and Full Exhaust Systems.
  • Yamaha R6 2017-2018 Note:  You will need an 18x1.5mm Lamda Collar in your R6 exhaust for this installation this does not come on the stock exhausts but standard on Graves Full Exhaust Systems.
  • Yamaha FZ10 2017-2018 Note: You will need an 18x1.5mm Lamda Collar in your FZ10 exhaust for this installation this does not come on the stock exhausts but standard on Graves Cat Eliminator and Full Exhaust Systems.
  • Yamaha FZ-09 2014-2017 Note: This will work with the OEM exhaust 18x1.5mm Lamda Collar or All Graves Full Exhaust Systems for this model.
  • Yamaha XSR900 2016-2017 Note: This will work with the OEM exhaust 18x1.5mm Lamda Collar or All Graves Full Exhaust Systems for this model.
  • Yamaha FZ-07 2015-2017 Note: This will work with the OEM exhaust 18x1.5mm Lamda Collar or All Graves Full Exhaust Systems for this model.
  • Yamaha MT-09 2015 + 
  • Yamaha MT-07 2015 +


Item #: FT_YAM_LCAT
Condition: New
Price: $385.00

Qty:

Description: Flash Tune ECU Based Quick shifter Kits for the 2017 Yamaha FZ10 / 2018 Yamaha MT-10

Use this kit alongside your FTEcu flashed ECU to activate clutchless shifting without letting off the throttle ! This kit includes everything you will need to utilize your FTecu flashed ECU’s Quick shifter Input. Use the pull down selection menu to select from "standard" - pulling up on the shifter to upshift or "gp" - pushing down on the shifter to upshift.
Item #: FT-QS10_AC
Condition: New
Price: $450.00

Qty:

Description:

FTEcu Yamaha R1 / R1M 2015-2017 ABS Delete Plus now allows you remove the factory ABS system completely without losing electronic assists. For off-road track use ONLY! This unit allows you to remove the ABS pump assembly while saving much needed weight for race applications when the ABS is not needed. Weight reduction is slightly over 3 lbs. saving (aftermarket brake lines not included).
 
Note: If you have an R1M the ABS Delete plus will be required if retaining electronic suspension. This ABS Delete plus will show no errors and is also fully compatible with the CCU data logger.
 
Fitment: 2015 - 2017 Yamaha R1 / R1M

Item #: FT-R1-ABS_PLUS
Condition: New
Price: $349.99

Qty:

Description:
 
FTEcu Yamaha R1 2017 / R1M 2017 / R1S 2017-2019 (See separate listing for 2015-2016 models) ECU Based Auto-Blipper Kit. Works great with the "GravesSpec" FTEcu map and when activated allows for smooth up-shifting and downshifting without using the clutch!

With this kit and your flashed ECU you can downshift smoother than would otherwise be possible without pulling the clutch! The latest generation of R1 models is finally capable of producing smooth fast clutch-less downshifting! After three years of development we are proud to release the best auto-blipper available.

This system provides smoother clutch-less downshifting that rivals even the OEM’s like BMW and Ducati

This kit requires:
  • FTECU Flashing Kit and licensed ECU or the purchase of a mail-in ECU flashing service


This kit includes:
  • 1 Push Type QSS/Blip Shift Sensor
  • 1 Pull Type QSS/Blip Shift Sensor
  • The two sensors together will replace your OEM pull type sensor
  • QSS/Blipper Harness to connect your new sensors to your ECU (Select Stock or Kit Harness from the pull down menu).
  • Scratch-off Activation Card to authorize the auto-blipper to be used with your tuning license.


Fitment: Yamaha R1 2017 / R1M 2017 / R1S 2017-2019 (See separate listing for 2015-2016 models)
Item #: FTEJ_AB_17R1S
Condition: New
Price: $400.00

Qty:

Description:
 
FTEcu ZX10r KDS to OBDII Diagnotic Harness Adapter for the 2016+ Models. This item is included with all 2016-2019 ZX-10R tuning kits.

This harness allows you to use a standard OBD-II automotive scanner with your 16+ Kawasaki ZX10R. This is a tool designed to clear any error codes that are common occurrences. NOTE: Must be used along with a diagnostic tool like listed below and is purchased separately.

ANY CAN enabled auto diagnostic scanner should work see example: Example $16 via Amazon

Item #: FT-OBD-KDS-ADAP
Condition: New
Price: $49.95
Qty:

Items 1-17 of 17

Popular Brands: